| /****************************************************************************** |
| * |
| * Copyright (C) 2009-2013 Broadcom Corporation |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at: |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| * |
| ******************************************************************************/ |
| |
| |
| #include "bt_target.h" |
| #include "bt_utils.h" |
| #include "btu.h" |
| #include "gap_int.h" |
| #include "l2cdefs.h" |
| #include "l2c_int.h" |
| #include <string.h> |
| #include "osi/include/mutex.h" |
| #if GAP_CONN_INCLUDED == TRUE |
| #include "btm_int.h" |
| |
| /********************************************************************************/ |
| /* L O C A L F U N C T I O N P R O T O T Y P E S */ |
| /********************************************************************************/ |
| static void gap_connect_ind (BD_ADDR bd_addr, UINT16 l2cap_cid, UINT16 psm, UINT8 l2cap_id); |
| static void gap_connect_cfm (UINT16 l2cap_cid, UINT16 result); |
| static void gap_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg); |
| static void gap_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg); |
| static void gap_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed); |
| static void gap_data_ind (UINT16 l2cap_cid, BT_HDR *p_msg); |
| static void gap_congestion_ind (UINT16 lcid, BOOLEAN is_congested); |
| static void gap_tx_complete_ind (UINT16 l2cap_cid, UINT16 sdu_sent); |
| |
| static tGAP_CCB *gap_find_ccb_by_cid (UINT16 cid); |
| static tGAP_CCB *gap_find_ccb_by_handle (UINT16 handle); |
| static tGAP_CCB *gap_allocate_ccb (void); |
| static void gap_release_ccb (tGAP_CCB *p_ccb); |
| static void gap_checks_con_flags (tGAP_CCB *p_ccb); |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_conn_init |
| ** |
| ** Description This function is called to initialize GAP connection management |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void gap_conn_init (void) |
| { |
| #if AMP_INCLUDED == TRUE |
| gap_cb.conn.reg_info.pAMP_ConnectInd_Cb = gap_connect_ind; |
| gap_cb.conn.reg_info.pAMP_ConnectCfm_Cb = gap_connect_cfm; |
| gap_cb.conn.reg_info.pAMP_ConnectPnd_Cb = NULL; |
| gap_cb.conn.reg_info.pAMP_ConfigInd_Cb = gap_config_ind; |
| gap_cb.conn.reg_info.pAMP_ConfigCfm_Cb = gap_config_cfm; |
| gap_cb.conn.reg_info.pAMP_DisconnectInd_Cb = gap_disconnect_ind; |
| gap_cb.conn.reg_info.pAMP_DisconnectCfm_Cb = NULL; |
| gap_cb.conn.reg_info.pAMP_QoSViolationInd_Cb = NULL; |
| gap_cb.conn.reg_info.pAMP_DataInd_Cb = gap_data_ind; |
| gap_cb.conn.reg_info.pAMP_CongestionStatus_Cb = gap_congestion_ind; |
| gap_cb.conn.reg_info.pAMP_TxComplete_Cb = NULL; |
| gap_cb.conn.reg_info.pAMP_MoveInd_Cb = NULL; |
| gap_cb.conn.reg_info.pAMP_MoveRsp_Cb = NULL; |
| gap_cb.conn.reg_info.pAMP_MoveCfm_Cb = NULL; //gap_move_cfm |
| gap_cb.conn.reg_info.pAMP_MoveCfmRsp_Cb = NULL; //gap_move_cfm_rsp |
| |
| #else |
| gap_cb.conn.reg_info.pL2CA_ConnectInd_Cb = gap_connect_ind; |
| gap_cb.conn.reg_info.pL2CA_ConnectCfm_Cb = gap_connect_cfm; |
| gap_cb.conn.reg_info.pL2CA_ConnectPnd_Cb = NULL; |
| gap_cb.conn.reg_info.pL2CA_ConfigInd_Cb = gap_config_ind; |
| gap_cb.conn.reg_info.pL2CA_ConfigCfm_Cb = gap_config_cfm; |
| gap_cb.conn.reg_info.pL2CA_DisconnectInd_Cb = gap_disconnect_ind; |
| gap_cb.conn.reg_info.pL2CA_DisconnectCfm_Cb = NULL; |
| gap_cb.conn.reg_info.pL2CA_QoSViolationInd_Cb = NULL; |
| gap_cb.conn.reg_info.pL2CA_DataInd_Cb = gap_data_ind; |
| gap_cb.conn.reg_info.pL2CA_CongestionStatus_Cb = gap_congestion_ind; |
| gap_cb.conn.reg_info.pL2CA_TxComplete_Cb = gap_tx_complete_ind; |
| #endif |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnOpen |
| ** |
| ** Description This function is called to open an L2CAP connection. |
| ** |
| ** Parameters: is_server - If TRUE, the connection is not created |
| ** but put into a "listen" mode waiting for |
| ** the remote side to connect. |
| ** |
| ** service_id - Unique service ID from |
| ** BTM_SEC_SERVICE_FIRST_EMPTY (6) |
| ** to BTM_SEC_MAX_SERVICE_RECORDS (32) |
| ** |
| ** p_rem_bda - Pointer to remote BD Address. |
| ** If a server, and we don't care about the |
| ** remote BD Address, then NULL should be passed. |
| ** |
| ** psm - the PSM used for the connection |
| ** |
| ** p_config - Optional pointer to configuration structure. |
| ** If NULL, the default GAP configuration will |
| ** be used. |
| ** |
| ** security - security flags |
| ** chan_mode_mask - (GAP_FCR_CHAN_OPT_BASIC, GAP_FCR_CHAN_OPT_ERTM, |
| ** GAP_FCR_CHAN_OPT_STREAM) |
| ** |
| ** p_cb - Pointer to callback function for events. |
| ** |
| ** Returns handle of the connection if successful, else GAP_INVALID_HANDLE |
| ** |
| *******************************************************************************/ |
| UINT16 GAP_ConnOpen (char *p_serv_name, UINT8 service_id, BOOLEAN is_server, |
| BD_ADDR p_rem_bda, UINT16 psm, tL2CAP_CFG_INFO *p_cfg, |
| tL2CAP_ERTM_INFO *ertm_info, UINT16 security, UINT8 chan_mode_mask, |
| tGAP_CONN_CALLBACK *p_cb, tBT_TRANSPORT transport) |
| { |
| tGAP_CCB *p_ccb; |
| UINT16 cid; |
| |
| GAP_TRACE_EVENT ("GAP_CONN - Open Request"); |
| |
| /* Allocate a new CCB. Return if none available. */ |
| if ((p_ccb = gap_allocate_ccb()) == NULL) |
| return (GAP_INVALID_HANDLE); |
| |
| /* update the transport */ |
| p_ccb->transport = transport; |
| |
| /* If caller specified a BD address, save it */ |
| if (p_rem_bda) |
| { |
| /* the bd addr is not BT_BD_ANY, then a bd address was specified */ |
| if (memcmp (p_rem_bda, BT_BD_ANY, BD_ADDR_LEN)) |
| p_ccb->rem_addr_specified = TRUE; |
| |
| memcpy (&p_ccb->rem_dev_address[0], p_rem_bda, BD_ADDR_LEN); |
| } |
| else if (!is_server) |
| { |
| /* remore addr is not specified and is not a server -> bad */ |
| return (GAP_INVALID_HANDLE); |
| } |
| |
| /* A client MUST have specified a bd addr to connect with */ |
| if (!p_ccb->rem_addr_specified && !is_server) |
| { |
| gap_release_ccb (p_ccb); |
| GAP_TRACE_ERROR ("GAP ERROR: Client must specify a remote BD ADDR to connect to!"); |
| return (GAP_INVALID_HANDLE); |
| } |
| |
| /* Check if configuration was specified */ |
| if (p_cfg) |
| p_ccb->cfg = *p_cfg; |
| |
| /* Configure L2CAP COC, if transport is LE */ |
| if (transport == BT_TRANSPORT_LE) |
| { |
| p_ccb->local_coc_cfg.credits = L2CAP_LE_DEFAULT_CREDIT; |
| p_ccb->local_coc_cfg.mtu = p_cfg->mtu; |
| p_ccb->local_coc_cfg.mps = L2CAP_LE_DEFAULT_MPS; |
| } |
| |
| p_ccb->p_callback = p_cb; |
| |
| /* If originator, use a dynamic PSM */ |
| #if AMP_INCLUDED == TRUE |
| if (!is_server) |
| gap_cb.conn.reg_info.pAMP_ConnectInd_Cb = NULL; |
| else |
| gap_cb.conn.reg_info.pAMP_ConnectInd_Cb = gap_connect_ind; |
| #else |
| if (!is_server) |
| gap_cb.conn.reg_info.pL2CA_ConnectInd_Cb = NULL; |
| else |
| gap_cb.conn.reg_info.pL2CA_ConnectInd_Cb = gap_connect_ind; |
| #endif |
| |
| /* Register the PSM with L2CAP */ |
| if (transport == BT_TRANSPORT_BR_EDR) |
| { |
| p_ccb->psm = L2CA_REGISTER (psm, &gap_cb.conn.reg_info, |
| AMP_AUTOSWITCH_ALLOWED|AMP_USE_AMP_IF_POSSIBLE); |
| if (p_ccb->psm == 0) |
| { |
| GAP_TRACE_ERROR ("%s: Failure registering PSM 0x%04x", __func__, psm); |
| gap_release_ccb (p_ccb); |
| return (GAP_INVALID_HANDLE); |
| } |
| } |
| |
| if (transport == BT_TRANSPORT_LE) |
| { |
| p_ccb->psm = L2CA_REGISTER_COC (psm, &gap_cb.conn.reg_info, |
| AMP_AUTOSWITCH_ALLOWED|AMP_USE_AMP_IF_POSSIBLE); |
| if (p_ccb->psm == 0) |
| { |
| GAP_TRACE_ERROR ("%s: Failure registering PSM 0x%04x", __func__, psm); |
| gap_release_ccb (p_ccb); |
| return (GAP_INVALID_HANDLE); |
| } |
| } |
| |
| /* Register with Security Manager for the specific security level */ |
| p_ccb->service_id = service_id; |
| if (!BTM_SetSecurityLevel ((UINT8)!is_server, p_serv_name, |
| p_ccb->service_id, security, p_ccb->psm, 0, 0)) |
| { |
| GAP_TRACE_ERROR ("GAP_CONN - Security Error"); |
| gap_release_ccb (p_ccb); |
| return (GAP_INVALID_HANDLE); |
| } |
| |
| /* Fill in eL2CAP parameter data */ |
| if( p_ccb->cfg.fcr_present ) |
| { |
| if(ertm_info == NULL) { |
| p_ccb->ertm_info.preferred_mode = p_ccb->cfg.fcr.mode; |
| p_ccb->ertm_info.user_rx_buf_size = GAP_DATA_BUF_SIZE; |
| p_ccb->ertm_info.user_tx_buf_size = GAP_DATA_BUF_SIZE; |
| p_ccb->ertm_info.fcr_rx_buf_size = L2CAP_INVALID_ERM_BUF_SIZE; |
| p_ccb->ertm_info.fcr_tx_buf_size = L2CAP_INVALID_ERM_BUF_SIZE; |
| } else { |
| p_ccb->ertm_info = *ertm_info; |
| } |
| } |
| |
| /* optional FCR channel modes */ |
| if(ertm_info != NULL) { |
| p_ccb->ertm_info.allowed_modes = |
| (chan_mode_mask) ? chan_mode_mask : (UINT8)L2CAP_FCR_CHAN_OPT_BASIC; |
| } |
| |
| if (is_server) |
| { |
| p_ccb->con_flags |= GAP_CCB_FLAGS_SEC_DONE; /* assume btm/l2cap would handle it */ |
| p_ccb->con_state = GAP_CCB_STATE_LISTENING; |
| return (p_ccb->gap_handle); |
| } |
| else |
| { |
| /* We are the originator of this connection */ |
| p_ccb->con_flags = GAP_CCB_FLAGS_IS_ORIG; |
| |
| /* Transition to the next appropriate state, waiting for connection confirm. */ |
| p_ccb->con_state = GAP_CCB_STATE_CONN_SETUP; |
| |
| /* mark security done flag, when security is not required */ |
| if ((security & (BTM_SEC_OUT_AUTHORIZE | BTM_SEC_OUT_AUTHENTICATE | BTM_SEC_OUT_ENCRYPT) ) == 0) |
| p_ccb->con_flags |= GAP_CCB_FLAGS_SEC_DONE; |
| |
| /* Check if L2CAP started the connection process */ |
| if (p_rem_bda && (transport == BT_TRANSPORT_BR_EDR)) |
| { |
| cid = L2CA_CONNECT_REQ (p_ccb->psm, p_rem_bda, &p_ccb->ertm_info); |
| if (cid != 0) |
| { |
| p_ccb->connection_id = cid; |
| return (p_ccb->gap_handle); |
| } |
| } |
| |
| if (p_rem_bda && (transport == BT_TRANSPORT_LE)) |
| { |
| cid = L2CA_CONNECT_COC_REQ (p_ccb->psm, p_rem_bda, &p_ccb->local_coc_cfg); |
| if (cid != 0) |
| { |
| p_ccb->connection_id = cid; |
| return (p_ccb->gap_handle); |
| } |
| } |
| |
| gap_release_ccb (p_ccb); |
| return (GAP_INVALID_HANDLE); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnClose |
| ** |
| ** Description This function is called to close a connection. |
| ** |
| ** Parameters: handle - Handle of the connection returned by GAP_ConnOpen |
| ** |
| ** Returns BT_PASS - closed OK |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** |
| *******************************************************************************/ |
| UINT16 GAP_ConnClose (UINT16 gap_handle) |
| { |
| tGAP_CCB *p_ccb = gap_find_ccb_by_handle (gap_handle); |
| |
| GAP_TRACE_EVENT ("GAP_CONN - close handle: 0x%x", gap_handle); |
| |
| if (p_ccb) |
| { |
| /* Check if we have a connection ID */ |
| if (p_ccb->con_state != GAP_CCB_STATE_LISTENING) |
| L2CA_DISCONNECT_REQ (p_ccb->connection_id); |
| |
| gap_release_ccb (p_ccb); |
| |
| return (BT_PASS); |
| } |
| |
| return (GAP_ERR_BAD_HANDLE); |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnReadData |
| ** |
| ** Description Normally not GKI aware application will call this function |
| ** after receiving GAP_EVT_RXDATA event. |
| ** |
| ** Parameters: handle - Handle of the connection returned in the Open |
| ** p_data - Data area |
| ** max_len - Byte count requested |
| ** p_len - Byte count received |
| ** |
| ** Returns BT_PASS - data read |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** GAP_NO_DATA_AVAIL - no data available |
| ** |
| *******************************************************************************/ |
| UINT16 GAP_ConnReadData (UINT16 gap_handle, UINT8 *p_data, UINT16 max_len, UINT16 *p_len) |
| { |
| tGAP_CCB *p_ccb = gap_find_ccb_by_handle (gap_handle); |
| UINT16 copy_len; |
| |
| if (!p_ccb) |
| return (GAP_ERR_BAD_HANDLE); |
| |
| *p_len = 0; |
| |
| if (fixed_queue_is_empty(p_ccb->rx_queue)) |
| return (GAP_NO_DATA_AVAIL); |
| |
| mutex_global_lock(); |
| |
| while (max_len) |
| { |
| BT_HDR *p_buf = fixed_queue_try_peek_first(p_ccb->rx_queue); |
| if (p_buf == NULL) |
| break; |
| |
| copy_len = (p_buf->len > max_len)?max_len:p_buf->len; |
| max_len -= copy_len; |
| *p_len += copy_len; |
| if (p_data) |
| { |
| memcpy (p_data, (UINT8 *)(p_buf + 1) + p_buf->offset, copy_len); |
| p_data += copy_len; |
| } |
| |
| if (p_buf->len > copy_len) |
| { |
| p_buf->offset += copy_len; |
| p_buf->len -= copy_len; |
| break; |
| } |
| osi_free(fixed_queue_try_dequeue(p_ccb->rx_queue)); |
| } |
| |
| p_ccb->rx_queue_size -= *p_len; |
| |
| mutex_global_unlock(); |
| |
| GAP_TRACE_EVENT ("GAP_ConnReadData - rx_queue_size left=%d, *p_len=%d", |
| p_ccb->rx_queue_size, *p_len); |
| |
| return (BT_PASS); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_GetRxQueueCnt |
| ** |
| ** Description This function return number of bytes on the rx queue. |
| ** |
| ** Parameters: handle - Handle returned in the GAP_ConnOpen |
| ** p_rx_queue_count - Pointer to return queue count in. |
| ** |
| ** |
| *******************************************************************************/ |
| int GAP_GetRxQueueCnt (UINT16 handle, UINT32 *p_rx_queue_count) |
| { |
| tGAP_CCB *p_ccb; |
| int rc = BT_PASS; |
| |
| /* Check that handle is valid */ |
| if (handle < GAP_MAX_CONNECTIONS) |
| { |
| p_ccb = &gap_cb.conn.ccb_pool[handle]; |
| |
| if (p_ccb->con_state == GAP_CCB_STATE_CONNECTED) |
| { |
| *p_rx_queue_count = p_ccb->rx_queue_size; |
| } |
| else |
| rc = GAP_INVALID_HANDLE; |
| } |
| else |
| rc = GAP_INVALID_HANDLE; |
| |
| GAP_TRACE_EVENT ("GAP_GetRxQueueCnt - rc = 0x%04x, rx_queue_count=%d", |
| rc , *p_rx_queue_count); |
| |
| return (rc); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnBTRead |
| ** |
| ** Description Bluetooth aware applications will call this function after receiving |
| ** GAP_EVT_RXDATA event. |
| ** |
| ** Parameters: handle - Handle of the connection returned in the Open |
| ** pp_buf - pointer to address of buffer with data, |
| ** |
| ** Returns BT_PASS - data read |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** GAP_NO_DATA_AVAIL - no data available |
| ** |
| *******************************************************************************/ |
| UINT16 GAP_ConnBTRead (UINT16 gap_handle, BT_HDR **pp_buf) |
| { |
| tGAP_CCB *p_ccb = gap_find_ccb_by_handle (gap_handle); |
| BT_HDR *p_buf; |
| |
| if (!p_ccb) |
| return (GAP_ERR_BAD_HANDLE); |
| |
| p_buf = (BT_HDR *)fixed_queue_try_dequeue(p_ccb->rx_queue); |
| |
| if (p_buf) |
| { |
| *pp_buf = p_buf; |
| |
| p_ccb->rx_queue_size -= p_buf->len; |
| return (BT_PASS); |
| } |
| else |
| { |
| *pp_buf = NULL; |
| return (GAP_NO_DATA_AVAIL); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnWriteData |
| ** |
| ** Description Normally not GKI aware application will call this function |
| ** to send data to the connection. |
| ** |
| ** Parameters: handle - Handle of the connection returned in the Open |
| ** p_data - Data area |
| ** max_len - Byte count requested |
| ** p_len - Byte count received |
| ** |
| ** Returns BT_PASS - data read |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** GAP_ERR_BAD_STATE - connection not established |
| ** GAP_CONGESTION - system is congested |
| ** |
| *******************************************************************************/ |
| UINT16 GAP_ConnWriteData (UINT16 gap_handle, UINT8 *p_data, UINT16 max_len, UINT16 *p_len) |
| { |
| tGAP_CCB *p_ccb = gap_find_ccb_by_handle (gap_handle); |
| BT_HDR *p_buf; |
| |
| *p_len = 0; |
| |
| if (!p_ccb) |
| return (GAP_ERR_BAD_HANDLE); |
| |
| if (p_ccb->con_state != GAP_CCB_STATE_CONNECTED) |
| return (GAP_ERR_BAD_STATE); |
| |
| while (max_len) |
| { |
| if (p_ccb->cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) |
| p_buf = (BT_HDR *)osi_malloc(L2CAP_FCR_ERTM_BUF_SIZE); |
| else |
| p_buf = (BT_HDR *)osi_malloc(GAP_DATA_BUF_SIZE); |
| |
| p_buf->offset = L2CAP_MIN_OFFSET; |
| p_buf->len = (p_ccb->rem_mtu_size < max_len) ? p_ccb->rem_mtu_size : max_len; |
| p_buf->event = BT_EVT_TO_BTU_SP_DATA; |
| |
| memcpy ((UINT8 *)(p_buf + 1) + p_buf->offset, p_data, p_buf->len); |
| |
| *p_len += p_buf->len; |
| max_len -= p_buf->len; |
| p_data += p_buf->len; |
| |
| GAP_TRACE_EVENT ("GAP_WriteData %d bytes", p_buf->len); |
| |
| fixed_queue_enqueue(p_ccb->tx_queue, p_buf); |
| } |
| |
| if (p_ccb->is_congested) |
| { |
| return (BT_PASS); |
| } |
| |
| /* Send the buffer through L2CAP */ |
| #if (GAP_CONN_POST_EVT_INCLUDED == TRUE) |
| gap_send_event (gap_handle); |
| #else |
| while ((p_buf = (BT_HDR *)fixed_queue_try_dequeue(p_ccb->tx_queue)) != NULL) |
| { |
| UINT8 status = L2CA_DATA_WRITE (p_ccb->connection_id, p_buf); |
| |
| if (status == L2CAP_DW_CONGESTED) |
| { |
| p_ccb->is_congested = TRUE; |
| break; |
| } |
| else if (status != L2CAP_DW_SUCCESS) |
| return (GAP_ERR_BAD_STATE); |
| } |
| #endif |
| return (BT_PASS); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnReconfig |
| ** |
| ** Description Applications can call this function to reconfigure the connection. |
| ** |
| ** Parameters: handle - Handle of the connection |
| ** p_cfg - Pointer to new configuration |
| ** |
| ** Returns BT_PASS - config process started |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** |
| *******************************************************************************/ |
| UINT16 GAP_ConnReconfig (UINT16 gap_handle, tL2CAP_CFG_INFO *p_cfg) |
| { |
| tGAP_CCB *p_ccb = gap_find_ccb_by_handle (gap_handle); |
| |
| if (!p_ccb) |
| return (GAP_ERR_BAD_HANDLE); |
| |
| p_ccb->cfg = *p_cfg; |
| |
| if (p_ccb->con_state == GAP_CCB_STATE_CONNECTED) |
| L2CA_CONFIG_REQ (p_ccb->connection_id, p_cfg); |
| |
| return (BT_PASS); |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnSetIdleTimeout |
| ** |
| ** Description Higher layers call this function to set the idle timeout for |
| ** a connection, or for all future connections. The "idle timeout" |
| ** is the amount of time that a connection can remain up with |
| ** no L2CAP channels on it. A timeout of zero means that the |
| ** connection will be torn down immediately when the last channel |
| ** is removed. A timeout of 0xFFFF means no timeout. Values are |
| ** in seconds. |
| ** |
| ** Parameters: handle - Handle of the connection |
| ** timeout - in secs |
| ** 0 = immediate disconnect when last channel is removed |
| ** 0xFFFF = no idle timeout |
| ** |
| ** Returns BT_PASS - config process started |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** |
| *******************************************************************************/ |
| UINT16 GAP_ConnSetIdleTimeout (UINT16 gap_handle, UINT16 timeout) |
| { |
| tGAP_CCB *p_ccb; |
| |
| if ((p_ccb = gap_find_ccb_by_handle (gap_handle)) == NULL) |
| return (GAP_ERR_BAD_HANDLE); |
| |
| if (L2CA_SetIdleTimeout (p_ccb->connection_id, timeout, FALSE)) |
| return (BT_PASS); |
| else |
| return (GAP_ERR_BAD_HANDLE); |
| } |
| |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnGetRemoteAddr |
| ** |
| ** Description This function is called to get the remote BD address |
| ** of a connection. |
| ** |
| ** Parameters: handle - Handle of the connection returned by GAP_ConnOpen |
| ** |
| ** Returns BT_PASS - closed OK |
| ** GAP_ERR_BAD_HANDLE - invalid handle |
| ** |
| *******************************************************************************/ |
| UINT8 *GAP_ConnGetRemoteAddr (UINT16 gap_handle) |
| { |
| tGAP_CCB *p_ccb = gap_find_ccb_by_handle (gap_handle); |
| |
| GAP_TRACE_EVENT ("GAP_ConnGetRemoteAddr gap_handle = %d", gap_handle); |
| |
| if ((p_ccb) && (p_ccb->con_state > GAP_CCB_STATE_LISTENING)) |
| { |
| GAP_TRACE_EVENT("GAP_ConnGetRemoteAddr bda :0x%02x:0x%02x:0x%02x:0x%02x:0x%02x:0x%02x\n", \ |
| p_ccb->rem_dev_address[0],p_ccb->rem_dev_address[1],p_ccb->rem_dev_address[2], |
| p_ccb->rem_dev_address[3],p_ccb->rem_dev_address[4],p_ccb->rem_dev_address[5]); |
| return (p_ccb->rem_dev_address); |
| } |
| else |
| { |
| GAP_TRACE_EVENT ("GAP_ConnGetRemoteAddr return Error "); |
| return (NULL); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnGetRemMtuSize |
| ** |
| ** Description Returns the remote device's MTU size |
| ** |
| ** Parameters: handle - Handle of the connection |
| ** |
| ** Returns UINT16 - maximum size buffer that can be transmitted to the peer |
| ** |
| *******************************************************************************/ |
| UINT16 GAP_ConnGetRemMtuSize (UINT16 gap_handle) |
| { |
| tGAP_CCB *p_ccb; |
| |
| if ((p_ccb = gap_find_ccb_by_handle (gap_handle)) == NULL) |
| return (0); |
| |
| return (p_ccb->rem_mtu_size); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function GAP_ConnGetL2CAPCid |
| ** |
| ** Description Returns the L2CAP channel id |
| ** |
| ** Parameters: handle - Handle of the connection |
| ** |
| ** Returns UINT16 - The L2CAP channel id |
| ** 0, if error |
| ** |
| *******************************************************************************/ |
| UINT16 GAP_ConnGetL2CAPCid (UINT16 gap_handle) |
| { |
| tGAP_CCB *p_ccb; |
| |
| if ((p_ccb = gap_find_ccb_by_handle (gap_handle)) == NULL) |
| return (0); |
| |
| return (p_ccb->connection_id); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_tx_connect_ind |
| ** |
| ** Description Sends out GAP_EVT_TX_EMPTY when transmission has been |
| ** completed. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| void gap_tx_complete_ind (UINT16 l2cap_cid, UINT16 sdu_sent) |
| { |
| tGAP_CCB *p_ccb = gap_find_ccb_by_cid (l2cap_cid); |
| if (p_ccb == NULL) |
| return; |
| |
| if ((p_ccb->con_state == GAP_CCB_STATE_CONNECTED) && (sdu_sent == 0xFFFF)) |
| { |
| GAP_TRACE_EVENT("%s: GAP_EVT_TX_EMPTY", __func__); |
| p_ccb->p_callback (p_ccb->gap_handle, GAP_EVT_TX_EMPTY); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_connect_ind |
| ** |
| ** Description This function handles an inbound connection indication |
| ** from L2CAP. This is the case where we are acting as a |
| ** server. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void gap_connect_ind (BD_ADDR bd_addr, UINT16 l2cap_cid, UINT16 psm, UINT8 l2cap_id) |
| { |
| UINT16 xx; |
| tGAP_CCB *p_ccb; |
| |
| /* See if we have a CCB listening for the connection */ |
| for (xx = 0, p_ccb = gap_cb.conn.ccb_pool; xx < GAP_MAX_CONNECTIONS; xx++, p_ccb++) |
| { |
| if ((p_ccb->con_state == GAP_CCB_STATE_LISTENING) |
| && (p_ccb->psm == psm) |
| && ((p_ccb->rem_addr_specified == FALSE) |
| || (!memcmp (bd_addr, p_ccb->rem_dev_address, BD_ADDR_LEN)))) |
| break; |
| } |
| |
| if (xx == GAP_MAX_CONNECTIONS) |
| { |
| GAP_TRACE_WARNING("*******"); |
| GAP_TRACE_WARNING("WARNING: GAP Conn Indication for Unexpected Bd Addr...Disconnecting"); |
| GAP_TRACE_WARNING("*******"); |
| |
| /* Disconnect because it is an unexpected connection */ |
| L2CA_DISCONNECT_REQ (l2cap_cid); |
| return; |
| } |
| |
| /* Transition to the next appropriate state, waiting for config setup. */ |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) |
| p_ccb->con_state = GAP_CCB_STATE_CFG_SETUP; |
| |
| /* Save the BD Address and Channel ID. */ |
| memcpy (&p_ccb->rem_dev_address[0], bd_addr, BD_ADDR_LEN); |
| p_ccb->connection_id = l2cap_cid; |
| |
| /* Send response to the L2CAP layer. */ |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) |
| L2CA_CONNECT_RSP (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_OK, L2CAP_CONN_OK, &p_ccb->ertm_info); |
| |
| if (p_ccb->transport == BT_TRANSPORT_LE) |
| { |
| L2CA_CONNECT_COC_RSP (bd_addr, l2cap_id, l2cap_cid, L2CAP_CONN_OK, L2CAP_CONN_OK, &p_ccb->local_coc_cfg); |
| |
| /* get the remote coc configuration */ |
| L2CA_GET_PEER_COC_CONFIG(l2cap_cid, &p_ccb->peer_coc_cfg); |
| p_ccb->rem_mtu_size = p_ccb->peer_coc_cfg.mtu; |
| |
| /* configuration is not required for LE COC */ |
| p_ccb->con_flags |= GAP_CCB_FLAGS_HIS_CFG_DONE; |
| p_ccb->con_flags |= GAP_CCB_FLAGS_MY_CFG_DONE; |
| gap_checks_con_flags (p_ccb); |
| } |
| |
| GAP_TRACE_EVENT("GAP_CONN - Rcvd L2CAP conn ind, CID: 0x%x", p_ccb->connection_id); |
| |
| /* Send a Configuration Request. */ |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) |
| L2CA_CONFIG_REQ (l2cap_cid, &p_ccb->cfg); |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_checks_con_flags |
| ** |
| ** Description This function processes the L2CAP configuration indication |
| ** event. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void gap_checks_con_flags (tGAP_CCB *p_ccb) |
| { |
| GAP_TRACE_EVENT ("gap_checks_con_flags conn_flags:0x%x, ", p_ccb->con_flags); |
| /* if all the required con_flags are set, report the OPEN event now */ |
| if ((p_ccb->con_flags & GAP_CCB_FLAGS_CONN_DONE) == GAP_CCB_FLAGS_CONN_DONE) |
| { |
| p_ccb->con_state = GAP_CCB_STATE_CONNECTED; |
| |
| p_ccb->p_callback (p_ccb->gap_handle, GAP_EVT_CONN_OPENED); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_sec_check_complete |
| ** |
| ** Description The function called when Security Manager finishes |
| ** verification of the service side connection |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void gap_sec_check_complete (BD_ADDR bd_addr, tBT_TRANSPORT transport, void *p_ref_data, UINT8 res) |
| { |
| tGAP_CCB *p_ccb = (tGAP_CCB *)p_ref_data; |
| UNUSED(bd_addr); |
| UNUSED (transport); |
| |
| GAP_TRACE_EVENT ("gap_sec_check_complete conn_state:%d, conn_flags:0x%x, status:%d", |
| p_ccb->con_state, p_ccb->con_flags, res); |
| if (p_ccb->con_state == GAP_CCB_STATE_IDLE) |
| return; |
| |
| if (res == BTM_SUCCESS) |
| { |
| p_ccb->con_flags |= GAP_CCB_FLAGS_SEC_DONE; |
| gap_checks_con_flags (p_ccb); |
| } |
| else |
| { |
| /* security failed - disconnect the channel */ |
| L2CA_DISCONNECT_REQ (p_ccb->connection_id); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_connect_cfm |
| ** |
| ** Description This function handles the connect confirm events |
| ** from L2CAP. This is the case when we are acting as a |
| ** client and have sent a connect request. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void gap_connect_cfm (UINT16 l2cap_cid, UINT16 result) |
| { |
| tGAP_CCB *p_ccb; |
| |
| /* Find CCB based on CID */ |
| if ((p_ccb = gap_find_ccb_by_cid (l2cap_cid)) == NULL) |
| return; |
| |
| /* initiate security process, if needed */ |
| if ( (p_ccb->con_flags & GAP_CCB_FLAGS_SEC_DONE) == 0 && p_ccb->transport != BT_TRANSPORT_LE) |
| { |
| btm_sec_mx_access_request (p_ccb->rem_dev_address, p_ccb->psm, TRUE, |
| 0, 0, &gap_sec_check_complete, p_ccb); |
| } |
| |
| /* If the connection response contains success status, then */ |
| /* Transition to the next state and startup the timer. */ |
| if ((result == L2CAP_CONN_OK) && (p_ccb->con_state == GAP_CCB_STATE_CONN_SETUP)) |
| { |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) |
| { |
| p_ccb->con_state = GAP_CCB_STATE_CFG_SETUP; |
| |
| /* Send a Configuration Request. */ |
| L2CA_CONFIG_REQ (l2cap_cid, &p_ccb->cfg); |
| } |
| |
| if (p_ccb->transport == BT_TRANSPORT_LE) |
| { |
| /* get the remote coc configuration */ |
| L2CA_GET_PEER_COC_CONFIG(l2cap_cid, &p_ccb->peer_coc_cfg); |
| p_ccb->rem_mtu_size = p_ccb->peer_coc_cfg.mtu; |
| |
| /* configuration is not required for LE COC */ |
| p_ccb->con_flags |= GAP_CCB_FLAGS_HIS_CFG_DONE; |
| p_ccb->con_flags |= GAP_CCB_FLAGS_MY_CFG_DONE; |
| p_ccb->con_flags |= GAP_CCB_FLAGS_SEC_DONE; |
| gap_checks_con_flags (p_ccb); |
| } |
| } |
| else |
| { |
| /* Tell the user if he has a callback */ |
| if (p_ccb->p_callback) |
| (*p_ccb->p_callback) (p_ccb->gap_handle, GAP_EVT_CONN_CLOSED); |
| |
| gap_release_ccb (p_ccb); |
| } |
| } |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_config_ind |
| ** |
| ** Description This function processes the L2CAP configuration indication |
| ** event. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void gap_config_ind (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg) |
| { |
| tGAP_CCB *p_ccb; |
| UINT16 local_mtu_size; |
| |
| /* Find CCB based on CID */ |
| if ((p_ccb = gap_find_ccb_by_cid (l2cap_cid)) == NULL) |
| return; |
| |
| /* Remember the remote MTU size */ |
| |
| if (p_ccb->cfg.fcr.mode == L2CAP_FCR_ERTM_MODE) |
| { |
| local_mtu_size = p_ccb->ertm_info.user_tx_buf_size |
| - sizeof(BT_HDR) - L2CAP_MIN_OFFSET; |
| } |
| else |
| local_mtu_size = L2CAP_MTU_SIZE; |
| |
| if ((!p_cfg->mtu_present)||(p_cfg->mtu > local_mtu_size)) |
| { |
| p_ccb->rem_mtu_size = local_mtu_size; |
| } |
| else |
| p_ccb->rem_mtu_size = p_cfg->mtu; |
| |
| /* For now, always accept configuration from the other side */ |
| p_cfg->flush_to_present = FALSE; |
| p_cfg->mtu_present = FALSE; |
| p_cfg->result = L2CAP_CFG_OK; |
| p_cfg->fcs_present = FALSE; |
| |
| L2CA_CONFIG_RSP (l2cap_cid, p_cfg); |
| |
| p_ccb->con_flags |= GAP_CCB_FLAGS_HIS_CFG_DONE; |
| |
| gap_checks_con_flags (p_ccb); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_config_cfm |
| ** |
| ** Description This function processes the L2CAP configuration confirmation |
| ** event. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void gap_config_cfm (UINT16 l2cap_cid, tL2CAP_CFG_INFO *p_cfg) |
| { |
| tGAP_CCB *p_ccb; |
| |
| /* Find CCB based on CID */ |
| if ((p_ccb = gap_find_ccb_by_cid (l2cap_cid)) == NULL) |
| return; |
| |
| if (p_cfg->result == L2CAP_CFG_OK) |
| { |
| p_ccb->con_flags |= GAP_CCB_FLAGS_MY_CFG_DONE; |
| |
| |
| if (p_ccb->cfg.fcr_present) |
| p_ccb->cfg.fcr.mode = p_cfg->fcr.mode; |
| else |
| p_ccb->cfg.fcr.mode = L2CAP_FCR_BASIC_MODE; |
| |
| gap_checks_con_flags (p_ccb); |
| } |
| else |
| { |
| p_ccb->p_callback (p_ccb->gap_handle, GAP_EVT_CONN_CLOSED); |
| gap_release_ccb (p_ccb); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_disconnect_ind |
| ** |
| ** Description This function handles a disconnect event from L2CAP. If |
| ** requested to, we ack the disconnect before dropping the CCB |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void gap_disconnect_ind (UINT16 l2cap_cid, BOOLEAN ack_needed) |
| { |
| tGAP_CCB *p_ccb; |
| |
| GAP_TRACE_EVENT ("GAP_CONN - Rcvd L2CAP disc, CID: 0x%x", l2cap_cid); |
| |
| /* Find CCB based on CID */ |
| if ((p_ccb = gap_find_ccb_by_cid (l2cap_cid)) == NULL) |
| return; |
| |
| if (ack_needed) |
| L2CA_DISCONNECT_RSP (l2cap_cid); |
| |
| p_ccb->p_callback (p_ccb->gap_handle, GAP_EVT_CONN_CLOSED); |
| gap_release_ccb (p_ccb); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_data_ind |
| ** |
| ** Description This function is called when data is received from L2CAP. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void gap_data_ind (UINT16 l2cap_cid, BT_HDR *p_msg) |
| { |
| tGAP_CCB *p_ccb; |
| |
| /* Find CCB based on CID */ |
| if ((p_ccb = gap_find_ccb_by_cid (l2cap_cid)) == NULL) |
| { |
| osi_free(p_msg); |
| return; |
| } |
| |
| if (p_ccb->con_state == GAP_CCB_STATE_CONNECTED) |
| { |
| fixed_queue_enqueue(p_ccb->rx_queue, p_msg); |
| |
| p_ccb->rx_queue_size += p_msg->len; |
| /* |
| GAP_TRACE_EVENT ("gap_data_ind - rx_queue_size=%d, msg len=%d", |
| p_ccb->rx_queue_size, p_msg->len); |
| */ |
| |
| p_ccb->p_callback (p_ccb->gap_handle, GAP_EVT_CONN_DATA_AVAIL); |
| } |
| else |
| { |
| osi_free(p_msg); |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_congestion_ind |
| ** |
| ** Description This is a callback function called by L2CAP when |
| ** data L2CAP congestion status changes |
| ** |
| *******************************************************************************/ |
| static void gap_congestion_ind (UINT16 lcid, BOOLEAN is_congested) |
| { |
| tGAP_CCB *p_ccb; |
| UINT16 event; |
| BT_HDR *p_buf; |
| UINT8 status; |
| |
| GAP_TRACE_EVENT ("GAP_CONN - Rcvd L2CAP Is Congested (%d), CID: 0x%x", |
| is_congested, lcid); |
| |
| /* Find CCB based on CID */ |
| if ((p_ccb = gap_find_ccb_by_cid (lcid)) == NULL) |
| return; |
| |
| p_ccb->is_congested = is_congested; |
| |
| event = (is_congested) ? GAP_EVT_CONN_CONGESTED : GAP_EVT_CONN_UNCONGESTED; |
| p_ccb->p_callback (p_ccb->gap_handle, event); |
| |
| if (!is_congested) |
| { |
| while ((p_buf = (BT_HDR *)fixed_queue_try_dequeue(p_ccb->tx_queue)) != NULL) |
| { |
| status = L2CA_DATA_WRITE (p_ccb->connection_id, p_buf); |
| |
| if (status == L2CAP_DW_CONGESTED) |
| { |
| p_ccb->is_congested = TRUE; |
| break; |
| } |
| else if (status != L2CAP_DW_SUCCESS) |
| break; |
| } |
| } |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_find_ccb_by_cid |
| ** |
| ** Description This function searches the CCB table for an entry with the |
| ** passed CID. |
| ** |
| ** Returns the CCB address, or NULL if not found. |
| ** |
| *******************************************************************************/ |
| static tGAP_CCB *gap_find_ccb_by_cid (UINT16 cid) |
| { |
| UINT16 xx; |
| tGAP_CCB *p_ccb; |
| |
| /* Look through each connection control block */ |
| for (xx = 0, p_ccb = gap_cb.conn.ccb_pool; xx < GAP_MAX_CONNECTIONS; xx++, p_ccb++) |
| { |
| if ((p_ccb->con_state != GAP_CCB_STATE_IDLE) && (p_ccb->connection_id == cid)) |
| return (p_ccb); |
| } |
| |
| /* If here, not found */ |
| return (NULL); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_find_ccb_by_handle |
| ** |
| ** Description This function searches the CCB table for an entry with the |
| ** passed handle. |
| ** |
| ** Returns the CCB address, or NULL if not found. |
| ** |
| *******************************************************************************/ |
| static tGAP_CCB *gap_find_ccb_by_handle (UINT16 handle) |
| { |
| tGAP_CCB *p_ccb; |
| |
| /* Check that handle is valid */ |
| if (handle < GAP_MAX_CONNECTIONS) |
| { |
| p_ccb = &gap_cb.conn.ccb_pool[handle]; |
| |
| if (p_ccb->con_state != GAP_CCB_STATE_IDLE) |
| return (p_ccb); |
| } |
| |
| /* If here, handle points to invalid connection */ |
| return (NULL); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_allocate_ccb |
| ** |
| ** Description This function allocates a new CCB. |
| ** |
| ** Returns CCB address, or NULL if none available. |
| ** |
| *******************************************************************************/ |
| static tGAP_CCB *gap_allocate_ccb (void) |
| { |
| UINT16 xx; |
| tGAP_CCB *p_ccb; |
| |
| /* Look through each connection control block for a free one */ |
| for (xx = 0, p_ccb = gap_cb.conn.ccb_pool; xx < GAP_MAX_CONNECTIONS; xx++, p_ccb++) |
| { |
| if (p_ccb->con_state == GAP_CCB_STATE_IDLE) |
| { |
| memset (p_ccb, 0, sizeof (tGAP_CCB)); |
| p_ccb->tx_queue = fixed_queue_new(SIZE_MAX); |
| p_ccb->rx_queue = fixed_queue_new(SIZE_MAX); |
| |
| p_ccb->gap_handle = xx; |
| p_ccb->rem_mtu_size = L2CAP_MTU_SIZE; |
| |
| return (p_ccb); |
| } |
| } |
| |
| /* If here, no free CCB found */ |
| return (NULL); |
| } |
| |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_release_ccb |
| ** |
| ** Description This function releases a CCB. |
| ** |
| ** Returns void |
| ** |
| *******************************************************************************/ |
| static void gap_release_ccb (tGAP_CCB *p_ccb) |
| { |
| UINT16 xx; |
| UINT16 psm = p_ccb->psm; |
| UINT8 service_id = p_ccb->service_id; |
| |
| /* Drop any buffers we may be holding */ |
| p_ccb->rx_queue_size = 0; |
| |
| while (!fixed_queue_is_empty(p_ccb->rx_queue)) |
| osi_free(fixed_queue_try_dequeue(p_ccb->rx_queue)); |
| fixed_queue_free(p_ccb->rx_queue, NULL); |
| p_ccb->rx_queue = NULL; |
| |
| while (!fixed_queue_is_empty(p_ccb->tx_queue)) |
| osi_free(fixed_queue_try_dequeue(p_ccb->tx_queue)); |
| fixed_queue_free(p_ccb->tx_queue, NULL); |
| p_ccb->tx_queue = NULL; |
| |
| p_ccb->con_state = GAP_CCB_STATE_IDLE; |
| |
| /* If no-one else is using the PSM, deregister from L2CAP */ |
| for (xx = 0, p_ccb = gap_cb.conn.ccb_pool; xx < GAP_MAX_CONNECTIONS; xx++, p_ccb++) |
| { |
| if ((p_ccb->con_state != GAP_CCB_STATE_IDLE) && (p_ccb->psm == psm)) |
| return; |
| } |
| |
| /* Free the security record for this PSM */ |
| BTM_SecClrService(service_id); |
| if (p_ccb->transport == BT_TRANSPORT_BR_EDR) |
| L2CA_DEREGISTER (psm); |
| |
| if(p_ccb->transport == BT_TRANSPORT_LE) |
| L2CA_DEREGISTER_COC (psm); |
| } |
| |
| #if (GAP_CONN_POST_EVT_INCLUDED == TRUE) |
| |
| /******************************************************************************* |
| ** |
| ** Function gap_send_event |
| ** |
| ** Description Send BT_EVT_TO_GAP_MSG event to BTU task |
| ** |
| ** Returns None |
| ** |
| *******************************************************************************/ |
| void gap_send_event (UINT16 gap_handle) |
| { |
| BT_HDR *p_msg = (BT_HDR *)osi_malloc(BT_HDR_SIZE); |
| |
| p_msg->event = BT_EVT_TO_GAP_MSG; |
| p_msg->len = 0; |
| p_msg->offset = 0; |
| p_msg->layer_specific = gap_handle; |
| |
| GKI_send_msg(BTU_TASK, BTU_HCI_RCV_MBOX, p_msg); |
| } |
| |
| #endif /* (GAP_CONN_POST_EVT_INCLUDED == TRUE) */ |
| #endif /* GAP_CONN_INCLUDED */ |
