commit | 9412bbaea51f577d903e060b8c8214fbd28b0b4f | [log] [tgz] |
---|---|---|
author | Balraj Selvaraj <bselva@codeaurora.org> | Thu Feb 11 08:16:02 2016 |
committer | Andre Eisenbach <eisenbach@google.com> | Fri Mar 04 18:53:04 2016 |
tree | 5b88442d76db7f28ef45f141428fae48002ada57 | |
parent | 4e972d8c24ecfb808757ef5c81eb3877ebc93027 [diff] |
GAP Setting remove device pending status as FALSE Use case: DUT deletes Link key and failed to initiate authentication request after remote headset turned Off and ON steps: - Pair the DUT and HS. (Link Keys get established.) - Now Switch OFF BT on DUT. (DUT still has the Link key of HS) - Reset the paired devices memory in HS and keep HS in pairing mode. (HS loses DUT's link key) - Now switch ON BT on DUT. (DUT starts reconnection with HS, but as HS lost DUT's key, PIN or KEY missing event will come to host) - DUT reconnects to HS (Using newly established link keys) - Now power OFF and ON the HS. - HS will try reconnection with DUT. - While there is an incoming connection from HS to DUT, host is giving negative link key reply always for the multiple link key requests from HS. - HS sends disconnection with "Authentication failure" Failure: DUT should not delete Link key and DUT should initiate Authenticatin request. Root cause: pending status was not FALSE from security device DB, which will causing Authentication Failure. Fix: Setting the remove device pending status to FALSE from security device DB, when the link key notification event comes. Basically it will avoid deleting the device from security device DB, Which is solving the reconnection initated from remote when we remove the link key at remote side. Change-Id: Ic164d8d5b5c2e0b9cc5f04f993047fb0a8e5d9a9
Just build AOSP - Fluoride is there by default.
Instructions for Ubuntu, tested on 15.10 with GCC 5.2.1.
sudo apt-get install libevent-dev
sudo apt-get install ninja-build
or download binary from https://github.com/ninja-build/ninja/releases
Get sha1 of current version from here and then download corresponding executable:
wget -O gn http://storage.googleapis.com/chromium-gn/<gn.sha1>
i.e. if sha1 is “3491f6687bd9f19946035700eb84ce3eed18c5fa” (value from 24 Feb 2016) do
wget -O gn http://storage.googleapis.com/chromium-gn/3491f6687bd9f19946035700eb84ce3eed18c5fa
Then make binary executable and put it on your PATH, i.e.:
chmod a+x ./gn sudo mv ./gn /usr/bin
mkdir ~/fluoride cd ~/fluoride git clone https://android.googlesource.com/platform/system/bt
Then fetch third party dependencies:
cd ~/fluoride/bt mkdir third_party git clone https://github.com/google/googletest.git git clone https://android.googlesource.com/platform/external/libchrome git clone https://android.googlesource.com/platform/external/modp_b64
And third party dependencies of third party dependencies:
cd fluoride/bt/third_party/libchrome/base/third_party mkdir valgrind cd valgrind curl https://chromium.googlesource.com/chromium/src/base/+/master/third_party/valgrind/valgrind.h?format=TEXT | base64 -d > valgrind.h curl https://chromium.googlesource.com/chromium/src/base/+/master/third_party/valgrind/memcheck.h?format=TEXT | base64 -d > memcheck.h
Fluoride currently has dependency on some internal Android projects, which also need to be downloaded. This will be removed in future:
cd ~/fluoride git clone https://android.googlesource.com/platform/system/core git clone https://android.googlesource.com/platform/hardware/libhardware git clone https://android.googlesource.com/platform/system/media
We need to configure some paths to make the build successful. Run:
cd ~/fluoride/bt gn args out/Default
This will prompt you to fill the contents of your “out/Default/args.gn” file. Make it look like below. Replace “/home/job” with path to your home directory, and don't use “~” in build arguments:
# Build arguments go here. Examples: # is_component_build = true # is_debug = false # See "gn args <out_dir> --list" for available build arguments. libhw_include_path = "/home/job/fluoride/libhardware/include" core_include_path = "/home/job/fluoride/core/include" audio_include_path = "/home/job/fluoride/media/audio/include"
Then generate your build files by calling
cd ~/fluoride/bt gn gen out/Default
cd ~/fluoride/bt ninja -C out/Default all
This will build all targets (the shared library, executables, tests, etc) and put them in out/Default. To build an individual target, replace “all” with the target of your choice, e.g. ninja -C out/Default net_test_osi
.
cd ~/fluoride/bt/out/Default LD_LIBRARY_PATH=./ ./bluetoothtbd -create-ipc-socket=fluoride