| 1.50, 2014-10-07, Allow missing clipboard id in OSC 52 |
| |
| * Tmux sends OSC 52 as "ESC ] 52 ; ; ... BEL", but we failed to recognize the |
| sequence because we expect a "clipboard identifier" character between the |
| two semicolons. We toss out the clipboard identifier anyway, so making it |
| optional makes tmux clipboard integration work. |
| |
| 1.49, 2014-10-06, Fix HOME/END under application cursor mode. |
| |
| * Send OSC H/OSC F for HOME/END when in application cursor mode, rather than |
| application keypad mode. |
| |
| 1.48, 2014-08-13, grab bag of fixes. |
| |
| * Place ruler text inside a span to fix issues on Firefox. |
| * Improve zoom keyboard handling on Mac and Firefox. |
| * Fix "CSI u" sequence. |
| * Remove the height + 1 underscore hack. |
| * Add parser routine and set css class for vt_tiledata support. Users will |
| still need to add a custom stylesheet to see vt tiles. |
| * Allow double-click selections to start with "." or "~". |
| * Disable terminal cursor hiding when vt mouse tracking is enabled. |
| * If the terminal cursor is hidden because it's under the mouse cursor, restore |
| the visibility when the terminal cursor moves. |
| |
| 1.47, 2014-07-28, Fix clear-selection-after-copy, fractional sizes |
| |
| * Always restore the selection after a copy operation, if we can. |
| The clearSelectionAfterCopy option shouldn't come in to play here. |
| We should only be clearing the selection after a delay, which means |
| we'll always need to restore after a copy. |
| * Chrome 38 returns fractional dimensions for nodes that were |
| set to a fractional size, where previous versions did not. |
| However, a node contained by such a node whose width is set to |
| '100%' returns only the integer portion of the width. This patch |
| makes us round up rather than set a fractional terminal width, and |
| adjusts the test to exepect this behavior. |
| |
| 1.46, 2014-07-24, Fix right-click paste issues. |
| |
| * Version 1.44 introduced an issue with right-click paste where focusing the |
| paste target would force the page to scroll 1000px past the end of the |
| terminal. Now we place the paste target within the visible bounds of the |
| terminal, but nehind it in z-index. |
| |
| 1.45, 2014-07-22, Fix overlay position on Firefox. |
| |
| * Add the trailing 'px' in the css top/left property. Chrome is ok without it, |
| but it's required on Firefox. |
| |
| 1.44, 2014-07-22, Add 'cursor-blink-cycle', bracketed paste, other fixes. |
| |
| * Fix Firefox detection in hterm.ScrollPort..decorate. |
| * Implement bracketed paste, BUG=chromium:393622 |
| * Fix flash on paste, BUG=chromium:390357, BUG=chromium:394568 |
| * Fix hollow-cursor-after-paste issue, BUG=chromium:390357 |
| * Fix reverse-wrap. |
| * Add a 'cursor-blink-cycle' preference which can be a number or a two-number |
| array. If two numbers are provided, the first is how long a blinking cursor |
| should be on, the second is how long it should be off. If a single number is |
| given it's used for both on and off. Anything else results in a fast |
| blinking cursor. BUG=chromium:366206 |
| * Hide terminal cursor when mouse cursor is over it, BUG=chromium:365910 |
| |
| 1.43, 2014-07-15, Implement reverse wraparound. |
| |
| * Implement reverse wraparound, add a test. |
| |
| 1.42, 2014-06-25, Stop requesting notification permission. |
| |
| * This code depended on a user action, but the preference observers aren't |
| run in the context of an action. For now, it's up to the embedder to request |
| the permission in hterm's behalf. |
| * Use window.document.title (not this.document_.title) as the default |
| notification text. |
| |
| 1.41, 2014-06-24, Lots of new preferences. |
| |
| * Add 'clear-selection-after-copy' preference, defaults to true. Set to false |
| to turn off hterm's policy of clearing your current selection after copying. |
| * Add 'use-default-window-copy' preference, needed in some environments (open |
| web, certain browsers) to make copy actually work. |
| * Add 'desktop-notification-bell' preference, to show a desktop notification |
| when the terminal bell is rung. |
| * Add 'east-asian-ambiguous-as-two-column' preference, defaults to false. |
| Set to true to treat characters of ambiguous width as two columns wide. |
| * Implement italic character attributes. "CSI [ 3 m" to enable, "CSI [ 23 m" |
| to disable. |
| |
| 1.40, 2014-05-15, fix selection collapse. |
| |
| * s/selection.collapse()/selection.collapseToEnd(). The former now throws an |
| exception in Chrome if called with no arguments, which breaks our attempts |
| to block local selection when vt mouse is enabled. |
| |
| 1.39, 2014-05-14, Add 'pass-meta-v' preference. |
| |
| * Add 'pass-meta-v' preference so Mac users can decide between Meta-V and |
| Meta-Shift-V for paste. |
| |
| 1.38, 2014-05-13, Add 'ctrl-c-copy' preference. |
| |
| * Add a 'ctrl-c-copy' preference. When this is set to false, the default |
| setting, Ctrl-C will always send ^C while Ctrl-Shift-C will copy if there is |
| an active selection and send ^C if not. |
| |
| When 'ctrl-c-copy' set to true the meaning of the shift key is reversed. |
| |
| On the open web, the only reliable cross-browser configuration is with |
| ctrl-c-copy set to true, as this allows the browser's built-in Ctrl-C handler |
| to do its job. Embedders can call term.getPrefs().changeDefault( |
| 'ctrl-c-copy', true) to adjust the default preference value in these |
| situations. |
| |
| 1.37, 2014-04-29, Fix double-paste, add IE compatibility. |
| |
| * Fix double-paste issue introduced in 1.36. |
| * First round of IE compatibility fixes. |
| |
| 1.36, 2014-04-28, Plumb ssh-agent, firefox, and wss-relay telemetry |
| |
| * Add first round of Firefox compatibility fixes. |
| * Add telemetry data for wss-based relay connections. |
| * Update --config=google. |
| * Add ssh-agent plumbing. |
| * Remote lib_fs.js dependency. |
| |
| 1.35, 2014-03-25, Add enable-bold-as-bright preference. |
| |
| * Adds a preference to control whether or not the bold attribute from ESC |
| "[ ... m" sequences also triggers bright colors. Preference is on by default |
| to match the behavior of xterm (and previous versions of hterm). Switch it |
| off to enable bold font face in non-bright colors. This is especially useful |
| if you've overidden your 16 color palette to something other than the |
| typical 8-dark/8-bright scheme. |
| |
| 1.34, 2014-03-14, Add ctrl-plus-minus-zero-zoom preference. |
| |
| * In the default state (true) hterm works the same as before. If set to |
| false, ctrl-shift-plus/minus/zero controls zoom, and ctrl-minus sends ^_. |
| |
| 1.32, 2014-03-04, Disable local selection in all mouse reporting modes. |
| |
| * Previously we allowed "local" selection (that which happens by default in |
| Chrome) to stay enabled for mouse mode 1001 (report mouseup/down only). This |
| caused a few issues. I didn't realize at the time that emacs used this |
| mouseup/down positions to set an active region, which conflicts with the |
| local selection. You tend wind up with a confusing partial overlap of the two |
| selections. Additionally, with copy-on-select enabled, the mouseup event |
| was consumed by the terminal and never sent to the host. |
| |
| This change disables local selection when we're in mode 1001. Local selection |
| was disabled in mode 1002, report mousedown/up/movement, which is preferred |
| by vi. |
| |
| Our "mouse-cell-motion-trick" was all about allowing local selection in mode |
| 1002, so that's been removed too. I doubt this preference was widely used. |
| |
| The change adds the ability to use alt-click to override the current mouse |
| state, so that you can make a local selection even while in mode 1001/1002. |
| Alt was chosen as its the only modifier key which can't be sent with a |
| mouse event, though if you're depending on alt === meta, you'll lose |
| the ability to send meta-mouse sequences. If your local window manager |
| already maps alt-click to something, then you can add any other modifier in |
| addition to alt (say, alt-ctrl-mousedown) to defeat your existing binding. |
| |
| 1.31, 2014-03-04, Add svg based zoom detection. |
| |
| * Re-implement zoom detection in terms of the currentScale property of svg |
| elements. This requires the svg element to be in the topmost document, |
| or at least not in the "about:blank" document that the scrollport creates |
| so it may not be perfect, but it's better than nothing. |
| |
| 1.30, 2014-03-04, Even better recursive "copy" fix. |
| |
| * BUG=chromium:340699: Auto copy doesn't work. |
| Now I see why the "select bags" aren't enough. Even for the simplest case |
| where we're copying an on-screen selection we need to use |
| Terminal.prototype.copySelectionToClipboard to handle copy of wrapped lines. |
| This fix reverts the changes from 1.28 and 1.29 in favor of just scheduling |
| the copy on a timeout, which defeats the recursive copy blocker. |
| * Revert "Scrolling Speedups" change (which never got a distinct hterm version |
| number). This caused issues with selections scrolled out of the visible area. |
| |
| 1.29, 2014-02-14, Better recursive "copy" fix. |
| |
| * BUG=chromium:340699: Auto copy doesn't work. |
| AFAICT, the e.clipboardData.setData call wasn't actually doing anything. The |
| scrollport's "select bags" were doing the right thing though, so we have that |
| going for us. It's likely that the recursive "copy" was required in older |
| versions of Chrome, but it doesn't seem to be necessary anymore. |
| * Fix the "Selection Copied" message from OSC 52 based copies. |
| |
| 1.28, 2014-02-13, Fix recursive "copy". |
| |
| * BUG=chromium:340699: Auto copy doesn't work. |
| Use e.clipboardData.setData, rather than causing a recursive |
| document.execCommand("copy"). |
| |
| 1.27, 2014-01-28, Add fullwidth support. |
| |
| * Teaches hterm about the difference between halfwidth and fullwidth characters. |
| |
| 1.26, 2014-01-16, Add 'user-css' preference. |
| |
| * Add a 'user-css' preference, which will load a user-defined css file (by url) |
| into the terminal document. This could be used to load a web font, or to |
| style the terminal in perverse ways. |
| |
| 1.25, 2014-01-08, Fix DECSET 1002-while-mousedown. |
| |
| * Fix an issue where DECSET 1002 failed if received while a mouse button was |
| down. |
| * Add option to swap Ctrl-V/Ctrl-Shift-V. |
| |
| 1.24, 2013-12-10, Fix cursor height regression. |
| |
| * Fix cursor sizing regression. syncCursorPosition_ is now only about the |
| position of the cursor, restyleCursor_ now sets cursor width, in addition to |
| height and cursor shape related stuff. Call restyleCursor_ from onResize_. |
| |
| 1.23, 2013-11-25, Prevent overlay focus, fix timeout tracking. |
| |
| * Prevent the terminal overlay (hterm.Terminal.prototype.showOverlay) from |
| taking focus if it happens to get clicked. |
| * Fix the overlay timeout tracking to fix cases where showOverlay is called |
| again before the previous overlay has timed out. |
| |
| 1.22, 2013-11-25, Fix full-screen scroll region fix. |
| |
| * hterm 1.19 attempted to ignore full-screen scroll regions, but the patch |
| got the variable names wrong. This fixes them. |
| |
| 1.21, 2013-10-31, Clear line-overflow whenever we insert characters. |
| |
| * BUG=266128, Clear line-overflow state when inserting text. This keeps |
| us from accidentally re-using the overflow state of text that was already |
| visible on the line. |
| |
| 1.20, 2013-10-31, Ignore ECH/EL in the presence of a cursor overflow. |
| |
| * BUG=232390, Ignore erase-characters and erase-in-line escapes when the cursor |
| has overflowed the terminal width. This deviates from xterm, but matches |
| gnome-terminal and other modern emulators. |
| |
| 1.19, 2013-10-30, Ignore full-screen vt scroll regions. |
| |
| * BUG=266197, If the host attempts to set the VT scroll region to be the entire |
| terminal height, we remove the scroll region entirely. This lets full-screen |
| apps overflow into the local scrollback buffer, which makes screen and tmux |
| much more pleasant to use. |
| |
| 1.18, 2013-10-29, Implement Cursor shape change sequences. |
| |
| * Implement cursor shape changes via DECSCUSR. |
| * Implement cursor shape changes via OSC 50 CursorShape (as described in |
| http://vim.wikia.com/wiki/Change_cursor_shape_in_different_modes.) |
| * Don't blink the cursor when the terminal is unfocused. |
| |
| 1.17, 2013-07-26, Double-click to select url-ish. |
| |
| * On double-click, expand the text selection to make it easy to select URLs |
| or other interesting substrings. |
| |
| 1.16, 2013-07-25, More fix newline regression. |
| |
| * 1.15 got the treatment of the areas above/below the scroll region wrong. |
| |
| 1.15, 2013-07-25, Fix newline regression. |
| |
| * getVTScrollBottom returns the row count if there is no vt scroll region in |
| effect, need to read the vtScrollBottom_ property directly instead. |
| |
| 1.14, 2013-07-19, Fix newline in VT Scroll Region, packaged app fix. |
| |
| * BUG=chromium:223140, Terminal viewer doesn't handle horizontally split curses |
| application correctly. |
| * Fix the hterm.windowType detection to not barf when hterm is used in a |
| Chrome packaged app. |
| |
| 1.13, 2013-07-17, Disable zoom warning on newer Chrome builds. |
| |
| * New builds of Chrome removed document.width/height, so we're not able to use |
| them to detect the zoom factor. Disabled zoom detection when these properties |
| are missing until we have a better solution. |
| * Fix libdot/changelog/(version|date) resources. |
| * Fix jscompiler errors. |
| * Stop printing "CSI K", "CSI ? J", and "ESC #" sequences with bad params. |
| * Shell script changes to pacify BSD. |
| |
| 1.12, 2013-06-24, Fix zoom warning. |
| |
| * Fix the browser-zoom detection so we show the zoom warning again. |
| |
| 1.11, 2013-06-20, Add 'send-encoding'/'receive-encoding' preferences. |
| |
| * Splits 'character-encoding' into two preferences so send and receive |
| encodings can be set independently. |
| * Refactor Terminal.keyboard.onKeyDown_ to allow Ctrl+Alt+(printable) key |
| combinations. |
| * Fix regression in Terminal..onPaste_. |
| |
| 1.10, 2013-06-20, Add 'character-encoding' preference. |
| |
| * Adds a 'character-encoding' preference which can be set to 'utf-8' (default) |
| or 'raw'. When set to 'utf-8' hterm's behavior is unchanged from previous |
| versions. When set to 'raw', hterm will not attempt to decode input or |
| encode output. |
| |
| 1.9, 2013-06-19, Fix issues with shift-key and CSI sequences. |
| |
| * Clear e.shiftKey in hterm_keyboard_keymap.js' sh() function so that |
| hterm_keyboard.js doesn't apply its own shift key munging. |
| |
| 1.8, 2013-05-31, overscroll fix |
| |
| * BUG=chromium:245700: Call preventDefault on mousewheel events that we've |
| handled. |
| |
| 1.7, 2013-05-31, Fix onTerminalResize, dec12 pref |
| |
| * Pass width and height in io.onTerminalResize again, which regressed in the |
| previous commit. |
| * BUG=245120: Add 'enable-dec12' preference, off by default, which allows the |
| host to control the cursor blink state via DEC private mode 12. |
| |
| 1.6, 2013-05-24, Track terminal size on the io object. |
| |
| * This installs a default onTerminalResize handler on the hterm.Terminal.IO |
| object that records the most recent terminal size as io.columnCount and |
| io.rowCount. This gives consumers synchronous access to these values without |
| having to wire up the event handler themselves. |
| |
| 1.5, 2013-04-18, Pass shift-ctrl-L |
| |
| * BUG=chromium:233008, PASS shift-ctrl-L (CrOS screen lock combo) |
| |
| 1.4, 2013-04-05, wipeContents fix |
| |
| * BUG=chromium:226819, Handle clearing screen when not scrolled to bottom |
| |
| 1.3, 2013-04-04, Keyboard fixes |
| |
| * BUG=chromium:174410, Fix to allow Alt-Backspace to send Meta-Backspace |
| * BUG=chromium:226752, Don't trap media keys (e.g. Mute) by default. |
| |
| 1.2, 2013-03-19, Fix bell regression. |
| |
| * Fix bug that made terminal bell only ring once. |
| |
| 1.1, 2013-03-13, Grab bag of fixes. |
| |
| * Fix base64 encoding of the bell audio. |
| * Break out of a parseUntilStringTerminator_ if an embedded ESC is |
| found (other than the one that may appear as part of a 7-bit ST), |
| or if the sequence has been going on for too long (measured by the |
| wall clock). |
| * BUG=chromium:191050, Map Chrome OS top-row keys to function keys. |
| * BUG=chromum-os:30792, beeps accumulate - leads to non stop beeping |
| * BUG=chromum-os:35288, scroll-on-output doesn't appear to work |
| * BUG=chromum-os:39645, Application keypad doesn't work properly |
| |
| 1.0, 2013-03-06, Initial split from Secure Shell codebase. |
| |
| * Move nassh related files out into ../nassh/. |
| * Add hterm_resources.concat. |
| * Add bin/export.sh and related concat/ lists. |