blob: aeb744bb5b08eeec28885ebbc1190478967bef12 [file] [log] [blame]
# Makefile.in generated by automake 1.10.1 from Makefile.am.
# lib/Makefile. Generated from Makefile.in by configure.
# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.
# Make bison/lib.
# Copyright (C) 2001, 2002, 2003, 2004, 2006, 2008 Free Software Foundation,
# Inc.
# This program is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program. If not, see <http://www.gnu.org/licenses/>.
# Copyright (C) 2002-2008 Free Software Foundation, Inc.
#
# This file is free software, distributed under the terms of the GNU
# General Public License. As a special exception to the GNU General
# Public License, this file may be distributed as part of a program
# that contains a configuration script generated by Autoconf, under
# the same distribution terms as the rest of that program.
#
# Generated by gnulib-tool.
# Reproduce by: gnulib-tool --import --dir=. --local-dir=gl --lib=libbison --source-base=lib --m4-base=m4 --doc-base=doc --tests-base=tests --aux-dir=build-aux --no-libtool --macro-prefix=gl announce-gen argmatch c-strcase config-h configmake dirname error extensions fopen-safer getopt gettext git-version-gen gnumakefile hash inttypes javacomp-script javaexec-script malloc mbswidth obstack quote quotearg stdbool stpcpy strerror strtoul strverscmp unistd unistd-safer unlocked-io unsetenv verify warnings xalloc xalloc-die xstrndup
VPATH = ../../bison-2.4.1-src/lib
pkgdatadir = $(datadir)/bison
pkglibdir = $(libdir)/bison
pkgincludedir = $(includedir)/bison
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = i386-pc-mingw32
host_triplet = i386-pc-mingw32
DIST_COMMON = $(noinst_HEADERS) $(srcdir)/Makefile.am \
$(srcdir)/Makefile.in $(srcdir)/config.hin $(srcdir)/gnulib.mk
subdir = lib
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/m4/argmatch.m4 \
$(top_srcdir)/m4/bison-i18n.m4 $(top_srcdir)/m4/c-working.m4 \
$(top_srcdir)/m4/config-h.m4 $(top_srcdir)/m4/cxx.m4 \
$(top_srcdir)/m4/dirname.m4 $(top_srcdir)/m4/dmalloc.m4 \
$(top_srcdir)/m4/dos.m4 $(top_srcdir)/m4/double-slash-root.m4 \
$(top_srcdir)/m4/environ.m4 $(top_srcdir)/m4/errno_h.m4 \
$(top_srcdir)/m4/error.m4 $(top_srcdir)/m4/exitfail.m4 \
$(top_srcdir)/m4/extensions.m4 $(top_srcdir)/m4/getopt.m4 \
$(top_srcdir)/m4/gettext.m4 $(top_srcdir)/m4/gnulib-common.m4 \
$(top_srcdir)/m4/gnulib-comp.m4 $(top_srcdir)/m4/hash.m4 \
$(top_srcdir)/m4/iconv.m4 $(top_srcdir)/m4/include_next.m4 \
$(top_srcdir)/m4/inline.m4 $(top_srcdir)/m4/intlmacosx.m4 \
$(top_srcdir)/m4/inttypes-pri.m4 $(top_srcdir)/m4/inttypes.m4 \
$(top_srcdir)/m4/javacomp.m4 $(top_srcdir)/m4/javaexec.m4 \
$(top_srcdir)/m4/lib-ld.m4 $(top_srcdir)/m4/lib-link.m4 \
$(top_srcdir)/m4/lib-prefix.m4 \
$(top_srcdir)/m4/localcharset.m4 $(top_srcdir)/m4/longlong.m4 \
$(top_srcdir)/m4/m4.m4 $(top_srcdir)/m4/malloc.m4 \
$(top_srcdir)/m4/mbrtowc.m4 $(top_srcdir)/m4/mbstate_t.m4 \
$(top_srcdir)/m4/mbswidth.m4 $(top_srcdir)/m4/nls.m4 \
$(top_srcdir)/m4/po.m4 $(top_srcdir)/m4/progtest.m4 \
$(top_srcdir)/m4/quote.m4 $(top_srcdir)/m4/quotearg.m4 \
$(top_srcdir)/m4/setenv.m4 $(top_srcdir)/m4/stdbool.m4 \
$(top_srcdir)/m4/stdint.m4 $(top_srcdir)/m4/stdio-safer.m4 \
$(top_srcdir)/m4/stdlib_h.m4 $(top_srcdir)/m4/stpcpy.m4 \
$(top_srcdir)/m4/strerror.m4 $(top_srcdir)/m4/string_h.m4 \
$(top_srcdir)/m4/strndup.m4 $(top_srcdir)/m4/strnlen.m4 \
$(top_srcdir)/m4/strtol.m4 $(top_srcdir)/m4/strtoul.m4 \
$(top_srcdir)/m4/strverscmp.m4 $(top_srcdir)/m4/subpipe.m4 \
$(top_srcdir)/m4/timevar.m4 $(top_srcdir)/m4/unistd-safer.m4 \
$(top_srcdir)/m4/unistd_h.m4 $(top_srcdir)/m4/unlocked-io.m4 \
$(top_srcdir)/m4/warnings.m4 $(top_srcdir)/m4/wchar.m4 \
$(top_srcdir)/m4/wchar_t.m4 $(top_srcdir)/m4/wctype.m4 \
$(top_srcdir)/m4/wcwidth.m4 $(top_srcdir)/m4/wint_t.m4 \
$(top_srcdir)/m4/xalloc.m4 $(top_srcdir)/m4/xstrndup.m4 \
$(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
$(ACLOCAL_M4)
mkinstalldirs = $(install_sh) -d
CONFIG_HEADER = config.h
CONFIG_CLEAN_FILES =
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
$(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
*) f=$$p;; \
esac;
am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
am__installdirs = "$(DESTDIR)$(libdir)"
libLIBRARIES_INSTALL = $(INSTALL_DATA)
LIBRARIES = $(lib_LIBRARIES) $(noinst_LIBRARIES)
AR = ar
ARFLAGS = cru
libbison_a_AR = $(AR) $(ARFLAGS)
am__DEPENDENCIES_1 =
am__dirstamp = $(am__leading_dot)dirstamp
am__objects_1 = abitset.$(OBJEXT) bitset.$(OBJEXT) \
bitset_stats.$(OBJEXT) bitsetv.$(OBJEXT) ebitset.$(OBJEXT) \
lbitset.$(OBJEXT) vbitset.$(OBJEXT)
am__objects_2 = bitsetv-print.$(OBJEXT)
am__objects_3 = timevar.$(OBJEXT)
am_libbison_a_OBJECTS = c-ctype.$(OBJEXT) c-strcasecmp.$(OBJEXT) \
c-strncasecmp.$(OBJEXT) localcharset.$(OBJEXT) \
mbswidth.$(OBJEXT) uniwidth/width.$(OBJEXT) \
xalloc-die.$(OBJEXT) xstrndup.$(OBJEXT) get-errno.$(OBJEXT) \
subpipe.$(OBJEXT) $(am__objects_1) $(am__objects_2) \
$(am__objects_3) \
progname.$(OBJEXT) progreloc.$(OBJEXT) relocatable.$(OBJEXT)
libbison_a_OBJECTS = $(am_libbison_a_OBJECTS)
liby_a_AR = $(AR) $(ARFLAGS)
liby_a_LIBADD =
am_liby_a_OBJECTS = main.$(OBJEXT) yyerror.$(OBJEXT)
liby_a_OBJECTS = $(am_liby_a_OBJECTS)
LTLIBRARIES = $(noinst_LTLIBRARIES)
DEFAULT_INCLUDES = -I. -I$(srcdir)
depcomp = $(SHELL) $(top_srcdir)/build-aux/depcomp
am__depfiles_maybe = depfiles
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
SOURCES = $(libbison_a_SOURCES) $(EXTRA_libbison_a_SOURCES) \
$(liby_a_SOURCES)
DIST_SOURCES = $(libbison_a_SOURCES) $(EXTRA_libbison_a_SOURCES) \
$(liby_a_SOURCES)
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
html-recursive info-recursive install-data-recursive \
install-dvi-recursive install-exec-recursive \
install-html-recursive install-info-recursive \
install-pdf-recursive install-ps-recursive install-recursive \
installcheck-recursive installdirs-recursive pdf-recursive \
ps-recursive uninstall-recursive
HEADERS = $(noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
distclean-recursive maintainer-clean-recursive
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
ACLOCAL = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run aclocal-1.10
AMTAR = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run tar
AUTOCONF = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run autoconf
AUTOHEADER = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run autoheader
AUTOM4TE = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run autom4te
AUTOMAKE = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run automake-1.10
AWK = gawk
BISON_CXX_WORKS = :
BISON_LOCALEDIR = /usr/share/locale
BITSIZEOF_PTRDIFF_T =
BITSIZEOF_SIG_ATOMIC_T =
BITSIZEOF_SIZE_T =
BITSIZEOF_WCHAR_T =
BITSIZEOF_WINT_T =
CC = gcc -std=gnu99
CCDEPMODE = depmode=gcc3
CFLAGS = -Wall -Wpointer-arith -O3 -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -Wstrict-prototypes
CLASSPATH = D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\dbexamples.jar;D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\db.jar;D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\debug\dbexamples.jar;D:\Program Files\Oracle\Berkeley DB 4.5.20\jar\debug\db.jar
CLASSPATH_SEPARATOR = ;
CONF_JAVA = gij
CONF_JAVAC =
CPP = gcc -std=gnu99 -E
CPPFLAGS = -D__USE_MINGW_ACCESS -D_LARGEFILE_SOURCE=1 -D_LARGEFILE64_SOURCE=1 -D_FILE_OFFSET_BITS=64 -DENABLE_RELOCATABLE -DINSTALLPREFIX=\"$(prefix)\" -DINSTALLDIR=\"$(bindir)\" -DEXEEXT=\"$(EXEEXT)\" -DNO_XMALLOC -ID:/Progra~1/GnuWin32/include
CXX = g++
CXXDEPMODE = depmode=gcc3
CXXFLAGS = -Wall -Wpointer-arith -O3 -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -fconserve-space -fno-rtti -D__STDC_LIMIT_MACROS
CYGPATH_W = cygpath -w
DEFS =
DEPDIR = .deps
ECHO_C =
ECHO_N = -n
ECHO_T =
EGREP = /usr/bin/grep -E
EMULTIHOP_HIDDEN = 0
EMULTIHOP_VALUE =
ENOLINK_HIDDEN = 0
ENOLINK_VALUE =
EOVERFLOW_HIDDEN = 0
EOVERFLOW_VALUE =
ERRNO_H = errno.h
EXEEXT = .exe
GCC = yes
GETOPT_H =
GETTEXT_MACRO_VERSION = 0.17
GLIBC21 = no
GMSGFMT = /usr/bin/msgfmt
GMSGFMT_015 = /usr/bin/msgfmt
GNULIB_ATOLL = 0
GNULIB_CALLOC_POSIX = 0
GNULIB_CHOWN = 0
GNULIB_CLOSE = 0
GNULIB_DUP2 = 0
GNULIB_ENVIRON = 1
GNULIB_EUIDACCESS = 0
GNULIB_FCHDIR = 0
GNULIB_FSYNC = 0
GNULIB_FTRUNCATE = 0
GNULIB_GETCWD = 0
GNULIB_GETDOMAINNAME = 0
GNULIB_GETDTABLESIZE = 0
GNULIB_GETHOSTNAME = 0
GNULIB_GETLOADAVG = 0
GNULIB_GETLOGIN_R = 0
GNULIB_GETPAGESIZE = 0
GNULIB_GETSUBOPT = 0
GNULIB_GETUSERSHELL = 0
GNULIB_IMAXABS = 0
GNULIB_IMAXDIV = 0
GNULIB_LCHOWN = 0
GNULIB_LSEEK = 0
GNULIB_MALLOC_POSIX = 1
GNULIB_MBSCASECMP = 0
GNULIB_MBSCASESTR = 0
GNULIB_MBSCHR = 0
GNULIB_MBSCSPN = 0
GNULIB_MBSLEN = 0
GNULIB_MBSNCASECMP = 0
GNULIB_MBSNLEN = 0
GNULIB_MBSPBRK = 0
GNULIB_MBSPCASECMP = 0
GNULIB_MBSRCHR = 0
GNULIB_MBSSEP = 0
GNULIB_MBSSPN = 0
GNULIB_MBSSTR = 0
GNULIB_MBSTOK_R = 0
GNULIB_MEMMEM = 0
GNULIB_MEMPCPY = 0
GNULIB_MEMRCHR = 0
GNULIB_MKDTEMP = 0
GNULIB_MKSTEMP = 0
GNULIB_PUTENV = 0
GNULIB_RANDOM_R = 0
GNULIB_RAWMEMCHR = 0
GNULIB_READLINK = 0
GNULIB_REALLOC_POSIX = 0
GNULIB_RPMATCH = 0
GNULIB_SETENV = 0
GNULIB_SLEEP = 0
GNULIB_STPCPY = 1
GNULIB_STPNCPY = 0
GNULIB_STRCASESTR = 0
GNULIB_STRCHRNUL = 0
GNULIB_STRDUP = 0
GNULIB_STRERROR = 1
GNULIB_STRNDUP = 1
GNULIB_STRNLEN = 1
GNULIB_STRPBRK = 0
GNULIB_STRSEP = 0
GNULIB_STRSIGNAL = 0
GNULIB_STRSTR = 0
GNULIB_STRTOD = 0
GNULIB_STRTOIMAX = 0
GNULIB_STRTOK_R = 0
GNULIB_STRTOLL = 0
GNULIB_STRTOULL = 0
GNULIB_STRTOUMAX = 0
GNULIB_STRVERSCMP = 1
GNULIB_UNISTD_H_SIGPIPE = 0
GNULIB_UNSETENV = 1
GNULIB_WCWIDTH = 1
GNULIB_WRITE = 0
GREP = /usr/bin/grep
HAVE_ATOLL = 1
HAVE_CALLOC_POSIX = 1
HAVE_DECL_ENVIRON = 0
HAVE_DECL_GETLOADAVG = 1
HAVE_DECL_GETLOGIN_R = 1
HAVE_DECL_IMAXABS = 1
HAVE_DECL_IMAXDIV = 1
HAVE_DECL_MEMMEM = 1
HAVE_DECL_MEMRCHR = 1
HAVE_DECL_STRDUP = 1
HAVE_DECL_STRERROR = 1
HAVE_DECL_STRNDUP = 0
HAVE_DECL_STRNLEN = 0
HAVE_DECL_STRSIGNAL = 1
HAVE_DECL_STRTOIMAX = 1
HAVE_DECL_STRTOK_R = 1
HAVE_DECL_STRTOUMAX = 1
HAVE_DECL_WCWIDTH = 0
HAVE_DUP2 = 1
HAVE_EUIDACCESS = 1
HAVE_FSYNC = 1
HAVE_FTRUNCATE = 1
HAVE_GCJ_C =
HAVE_GCJ_IN_PATH = yes
HAVE_GETDOMAINNAME = 1
HAVE_GETDTABLESIZE = 1
HAVE_GETHOSTNAME = 1
HAVE_GETPAGESIZE = 1
HAVE_GETSUBOPT = 1
HAVE_GETUSERSHELL = 1
HAVE_GIJ = 1
HAVE_GIJ_IN_PATH = yes
HAVE_INTTYPES_H = 1
HAVE_ISWCNTRL = 1
HAVE_JAVA =
HAVE_JAVAC =
HAVE_JAVAC_ENVVAR =
HAVE_JAVAC_IN_PATH =
HAVE_JAVA_ENVVAR =
HAVE_JAVA_IN_PATH = yes
HAVE_JIKES =
HAVE_JIKES_IN_PATH =
HAVE_JRE =
HAVE_JRE_IN_PATH =
HAVE_JVIEW =
HAVE_JVIEW_IN_PATH = yes
HAVE_LONG_LONG_INT = 1
HAVE_MALLOC_POSIX = 0
HAVE_MEMPCPY = 1
HAVE_MKDTEMP = 1
HAVE_OS_H = 0
HAVE_RANDOM_R = 1
HAVE_RAWMEMCHR = 1
HAVE_READLINK = 1
HAVE_REALLOC_POSIX = 1
HAVE_RPMATCH = 1
HAVE_SETENV = 1
HAVE_SIGNED_SIG_ATOMIC_T =
HAVE_SIGNED_WCHAR_T =
HAVE_SIGNED_WINT_T =
HAVE_SLEEP = 1
HAVE_STDINT_H = 1
HAVE_STPCPY = 0
HAVE_STPNCPY = 1
HAVE_STRCASESTR = 1
HAVE_STRCHRNUL = 1
HAVE_STRNDUP = 0
HAVE_STRPBRK = 1
HAVE_STRSEP = 1
HAVE_STRTOD = 1
HAVE_STRTOLL = 1
HAVE_STRTOULL = 1
HAVE_STRUCT_RANDOM_DATA = 0
HAVE_STRVERSCMP = 0
HAVE_SYS_BITYPES_H =
HAVE_SYS_INTTYPES_H =
HAVE_SYS_LOADAVG_H = 0
HAVE_SYS_PARAM_H = 0
HAVE_SYS_TYPES_H = 1
HAVE_UNISTD_H = 1
HAVE_UNSETENV = 0
HAVE_UNSIGNED_LONG_LONG_INT = 1
HAVE_WCHAR_H = 1
HAVE_WCTYPE_H = 1
HAVE_WINT_T = 1
HAVE__BOOL = 1
HELP2MAN = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run help2man
INCLUDE_NEXT = include_next
INCLUDE_NEXT_AS_FIRST_DIRECTIVE = include_next
INSTALL = /bin/install.exe -cp
INSTALL_DATA = /bin/install.exe -cp
INSTALL_PROGRAM = /bin/install.exe -cp
INSTALL_SCRIPT = ${INSTALL}
INSTALL_STRIP_PROGRAM = $(install_sh) -c -s
INT32_MAX_LT_INTMAX_MAX = 1
INT64_MAX_EQ_LONG_MAX = 0
INTLLIBS = D:/Progra~1/GnuWin32/lib/libintl.dll.a -LD:/Progra~1/GnuWin32/lib
INTL_MACOSX_LIBS =
INTTYPES_H = inttypes.h
LDFLAGS = -Wl,-s -Wl,--force-exe-suffix -Wl,--enable-auto-import -Wl,--enable-runtime-pseudo-reloc -Wl,--allow-multiple-definition -Wl,--enable-stdcall-fixup -LD:/Progra~1/GnuWin32/lib
LEX = flex
LEXLIB =
LEX_OUTPUT_ROOT = lex.yy
LIBBISON_LIBDEPS =
LIBBISON_LTLIBDEPS =
LIBICONV = D:/Progra~1/GnuWin32/lib/libiconv.dll.a -LD:/Progra~1/GnuWin32/lib
LIBINTL = D:/Progra~1/GnuWin32/lib/libintl.dll.a -LD:/Progra~1/GnuWin32/lib
LIBOBJS =
LIBS = -Wl,-s -LD:/Progra~1/GnuWin32/lib -lintl -lwsock32 -lole32 -luuid -lmsvcp60
LOCALCHARSET_TESTS_ENVIRONMENT = CHARSETALIASDIR="$(top_builddir)/lib"
LTLIBICONV = -LD:/Progra~1/GnuWin32/lib -liconv -RD:/Progra~1/GnuWin32/lib
LTLIBINTL = -LD:/Progra~1/GnuWin32/lib -lintl -RD:/Progra~1/GnuWin32/lib
LTLIBOBJS =
M4 = /usr/bin/m4
MAKEINFO = ${SHELL} /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/missing --run makeinfo
MKDIR_P = /usr/bin/mkdir -p
MSGFMT = /usr/bin/msgfmt
MSGFMT_015 = /usr/bin/msgfmt
MSGMERGE = /usr/bin/msgmerge
NEXT_ERRNO_H = <errno.h>
NEXT_INTTYPES_H = <inttypes.h>
NEXT_STDINT_H = <stdint.h>
NEXT_STDLIB_H = <stdlib.h>
NEXT_STRING_H = <string.h>
NEXT_UNISTD_H = <unistd.h>
NEXT_WCHAR_H = <wchar.h>
NEXT_WCTYPE_H = <wctype.h>
O0CFLAGS = -Wall -Wpointer-arith -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -Wstrict-prototypes
O0CXXFLAGS = -Wall -Wpointer-arith -fms-extensions -mms-bitfields -fno-exceptions -fomit-frame-pointer -march=i386 -ffast-math -fconserve-space -fno-rtti -D__STDC_LIMIT_MACROS
OBJEXT = o
PACKAGE = bison
PACKAGE_BUGREPORT = bug-bison@gnu.org
PACKAGE_COPYRIGHT_YEAR = 2008
PACKAGE_NAME = GNU Bison
PACKAGE_STRING = GNU Bison 2.4.1
PACKAGE_TARNAME = bison
PACKAGE_VERSION = 2.4.1
PATH_SEPARATOR = :
POSUB = po
PRAGMA_SYSTEM_HEADER = #pragma GCC system_header
PRIPTR_PREFIX = ""
PRI_MACROS_BROKEN = 0
PTRDIFF_T_SUFFIX =
RANLIB = ranlib
REPLACE_CHOWN = 0
REPLACE_CLOSE = 0
REPLACE_FCHDIR = 0
REPLACE_GETCWD = 0
REPLACE_GETPAGESIZE = 0
REPLACE_ISWCNTRL = 0
REPLACE_LCHOWN = 0
REPLACE_LSEEK = 0
REPLACE_MEMMEM = 0
REPLACE_MKSTEMP = 0
REPLACE_PUTENV = 0
REPLACE_STRCASESTR = 0
REPLACE_STRDUP = 0
REPLACE_STRERROR = 1
REPLACE_STRSIGNAL = 0
REPLACE_STRSTR = 0
REPLACE_STRTOD = 0
REPLACE_WCWIDTH = 1
REPLACE_WRITE = 0
SET_MAKE =
SHELL = /bin/sh
SIG_ATOMIC_T_SUFFIX =
SIZE_T_SUFFIX =
STDBOOL_H =
STDINT_H =
STRIP =
UINT32_MAX_LT_UINTMAX_MAX = 1
UINT64_MAX_EQ_ULONG_MAX = 0
UNISTD_H_HAVE_WINSOCK2_H = 0
USE_NLS = yes
VALGRIND =
VERSION = 2.4.1
VOID_UNSETENV = 0
WARN_CFLAGS =
WARN_CXXFLAGS =
WCHAR_H = wchar.h
WCHAR_T_SUFFIX =
WCTYPE_H =
WERROR_CFLAGS =
WINT_T_SUFFIX =
XGETTEXT = /usr/bin/xgettext
XGETTEXT_015 = /usr/bin/xgettext
XGETTEXT_EXTRA_OPTIONS = --flag=error:3:c-format --flag=error_at_line:5:c-format
XSLTPROC =
YACC = bison -y
YACC_LIBRARY = liby.a
YACC_SCRIPT = yacc
YFLAGS =
abs_builddir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1/lib
abs_srcdir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1/../bison-2.4.1-src/lib
abs_top_builddir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1
abs_top_srcdir = /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1/../bison-2.4.1-src
ac_ct_CC = gcc
ac_ct_CXX =
aclocaldir = ${datadir}/aclocal
am__include = include
am__leading_dot = .
am__quote =
am__tar = ${AMTAR} chof - "$$tardir"
am__untar = ${AMTAR} xf -
bindir = ${exec_prefix}/bin
build = i386-pc-mingw32
build_alias = i386-pc-mingw32
build_cpu = i386
build_os = mingw32
build_vendor = pc
builddir = .
datadir = ${datarootdir}
datarootdir = ${prefix}/share
docdir = ${datarootdir}/doc/${PACKAGE_TARNAME}
dvidir = ${docdir}
exec_prefix = ${prefix}
gl_LIBOBJS = argmatch.o basename.o dirname.o dup-safer.o error.o exitfail.o fd-safer.o fopen-safer.o hash.o malloc.o obstack.o pipe-safer.o quote.o quotearg.o stpcpy.o strerror.o stripslash.o strndup.o strnlen.o strverscmp.o unsetenv.o wcwidth.o xmalloc.o
gl_LTLIBOBJS = argmatch.lo basename.lo dirname.lo dup-safer.lo error.lo exitfail.lo fd-safer.lo fopen-safer.lo hash.lo malloc.lo obstack.lo pipe-safer.lo quote.lo quotearg.lo stpcpy.lo strerror.lo stripslash.lo strndup.lo strnlen.lo strverscmp.lo unsetenv.lo wcwidth.lo xmalloc.lo
gltests_LIBOBJS =
gltests_LTLIBOBJS =
host = i386-pc-mingw32
host_alias = i386-pc-mingw32
host_cpu = i386
host_os = mingw32
host_vendor = pc
htmldir = ${docdir}
includedir = ${prefix}/include
infodir = ${datarootdir}/info
install_sh = $(SHELL) /cygdrive/j/Devel/bison/2.4.1/bison-2.4.1-src/build-aux/install-sh
libdir = ${exec_prefix}/lib
libexecdir = ${exec_prefix}/libexec
localedir = ${datarootdir}/locale
localstatedir = ${prefix}/var
mandir = ${datarootdir}/man
mkdir_p = /usr/bin/mkdir -p
oldincludedir = /usr/include
pdfdir = ${docdir}
prefix = c:/progra~1/bison
program_transform_name = s&$$&&;s&^&&;s/i386-pc-mingw32//
psdir = ${docdir}
sbindir = ${exec_prefix}/sbin
sharedstatedir = ${prefix}/com
srcdir = ../../bison-2.4.1-src/lib
sysconfdir = ${prefix}/etc
target_alias = i386-pc-mingw32
top_build_prefix = ../
top_builddir = ..
top_srcdir = ../../bison-2.4.1-src
AUTOMAKE_OPTIONS = 1.5 gnits subdir-objects
SUBDIRS =
noinst_HEADERS =
noinst_LIBRARIES = libbison.a
noinst_LTLIBRARIES =
# This is for those projects which use "gettextize --intl" to put a source-code
# copy of libintl into their package. In such projects, every Makefile.am needs
# -I$(top_builddir)/intl, so that <libintl.h> can be found in this directory.
# For the Makefile.ams in other directories it is the maintainer's
# responsibility; for the one from gnulib we do it here.
# This option has no effect when the user disables NLS (because then the intl
# directory contains no libintl.h file) or when the project does not use
# "gettextize --intl".
#AM_CPPFLAGS += -I$(top_builddir)/intl
EXTRA_DIST = $(top_srcdir)/build-aux/announce-gen argmatch.c \
argmatch.h basename.c dirname.c dirname.h stripslash.c \
errno.in.h error.c error.h exitfail.c exitfail.h fopen-safer.c \
stdio--.h stdio-safer.h getopt.c getopt.in.h getopt1.c \
getopt_int.h $(top_srcdir)/build-aux/config.rpath \
$(top_srcdir)/build-aux/git-version-gen \
$(top_srcdir)/GNUmakefile hash.c hash.h \
$(top_srcdir)/build-aux/config.rpath intprops.h inttypes.in.h \
$(top_srcdir)/build-aux/javacomp.sh.in \
$(top_srcdir)/build-aux/javaexec.sh.in \
$(top_srcdir)/build-aux/link-warning.h config.charset \
ref-add.sin ref-del.sin malloc.c malloc.c obstack.c obstack.h \
quote.c quote.h quotearg.c quotearg.h stdbool.in.h stdint.in.h \
stdlib.in.h stpcpy.c streq.h strerror.c string.in.h strndup.c \
strnlen.c strtol.c strtoul.c strverscmp.c unistd.in.h \
dup-safer.c fd-safer.c pipe-safer.c unistd--.h unistd-safer.h \
unitypes.h localcharset.h uniwidth.h uniwidth/cjk.h \
unlocked-io.h unsetenv.c wchar.in.h wctype.in.h wcwidth.c \
xalloc.h xmalloc.c
BUILT_SOURCES = configmake.h $(ERRNO_H) $(GETOPT_H) $(INTTYPES_H) \
$(STDBOOL_H) $(STDINT_H) stdlib.h string.h unistd.h $(WCHAR_H) \
$(WCTYPE_H)
SUFFIXES = .sed .sin
MOSTLYCLEANFILES = core *.stackdump errno.h errno.h-t getopt.h \
getopt.h-t inttypes.h inttypes.h-t stdbool.h stdbool.h-t \
stdint.h stdint.h-t stdlib.h stdlib.h-t string.h string.h-t \
unistd.h unistd.h-t wchar.h wchar.h-t wctype.h wctype.h-t
MOSTLYCLEANDIRS =
CLEANFILES = configmake.h configmake.h-t charset.alias ref-add.sed \
ref-del.sed
DISTCLEANFILES =
MAINTAINERCLEANFILES =
AM_CPPFLAGS =
# Non-gnulib sources in Bison's internal library.
libbison_a_SOURCES = c-ctype.h c-ctype.c c-strcase.h c-strcasecmp.c \
c-strncasecmp.c gettext.h localcharset.h localcharset.c \
mbswidth.h mbswidth.c uniwidth/width.c verify.h xalloc-die.c \
xstrndup.h xstrndup.c get-errno.h get-errno.c subpipe.h \
subpipe.c $(bitsets_sources) $(additional_bitsets_sources) \
$(timevars_sources)
libbison_a_LIBADD = $(gl_LIBOBJS)
libbison_a_DEPENDENCIES = $(gl_LIBOBJS)
EXTRA_libbison_a_SOURCES = argmatch.c basename.c dirname.c \
stripslash.c error.c exitfail.c fopen-safer.c getopt.c \
getopt1.c hash.c malloc.c malloc.c obstack.c quote.c \
quotearg.c stpcpy.c strerror.c strndup.c strnlen.c strtol.c \
strtoul.c strverscmp.c dup-safer.c fd-safer.c pipe-safer.c \
unsetenv.c wcwidth.c xmalloc.c
LINK_WARNING_H = $(top_srcdir)/build-aux/link-warning.h
charset_alias = $(DESTDIR)$(libdir)/charset.alias
charset_tmp = $(DESTDIR)$(libdir)/charset.tmp
AM_CFLAGS = $(WARN_CFLAGS)
# Implementation of bitsets.
bitsets_sources = \
abitset.c abitset.h bbitset.h bitset.c bitset.h bitset_stats.c \
bitset_stats.h bitsetv.c bitsetv.h ebitset.c ebitset.h lbitset.c \
lbitset.h libiberty.h vbitset.c vbitset.h
# Additional bitset operations.
additional_bitsets_sources = \
bitsetv-print.h bitsetv-print.c
# timevars, stolen from GCC.
timevars_sources = \
timevar.h timevar.c timevar.def
# The Yacc compatibility library.
lib_LIBRARIES = $(YACC_LIBRARY)
EXTRA_LIBRARIES = liby.a
liby_a_SOURCES = main.c yyerror.c
all: $(BUILT_SOURCES) config.h
$(MAKE) $(AM_MAKEFLAGS) all-recursive
.SUFFIXES:
.SUFFIXES: .sed .sin .c .o .obj
$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(srcdir)/gnulib.mk $(am__configure_deps)
@for dep in $?; do \
case '$(am__configure_deps)' in \
*$$dep*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \
&& exit 0; \
exit 1;; \
esac; \
done; \
echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnits lib/Makefile'; \
cd $(top_srcdir) && \
$(AUTOMAKE) --gnits lib/Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
@case '$?' in \
*config.status*) \
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
*) \
echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
esac;
$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(top_srcdir)/configure: $(am__configure_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
$(ACLOCAL_M4): $(am__aclocal_m4_deps)
cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
config.h: stamp-h1
@if test ! -f $@; then \
rm -f stamp-h1; \
$(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
else :; fi
stamp-h1: $(srcdir)/config.hin $(top_builddir)/config.status
@rm -f stamp-h1
cd $(top_builddir) && $(SHELL) ./config.status lib/config.h
$(srcdir)/config.hin: $(am__configure_deps)
cd $(top_srcdir) && $(AUTOHEADER)
rm -f stamp-h1
touch $@
distclean-hdr:
-rm -f config.h stamp-h1
install-libLIBRARIES: $(lib_LIBRARIES)
@$(NORMAL_INSTALL)
test -z "$(libdir)" || $(MKDIR_P) "$(DESTDIR)$(libdir)"
@list='$(lib_LIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
f=$(am__strip_dir) \
echo " $(libLIBRARIES_INSTALL) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \
$(libLIBRARIES_INSTALL) "$$p" "$(DESTDIR)$(libdir)/$$f"; \
else :; fi; \
done
@$(POST_INSTALL)
@list='$(lib_LIBRARIES)'; for p in $$list; do \
if test -f $$p; then \
p=$(am__strip_dir) \
echo " $(RANLIB) '$(DESTDIR)$(libdir)/$$p'"; \
$(RANLIB) "$(DESTDIR)$(libdir)/$$p"; \
else :; fi; \
done
uninstall-libLIBRARIES:
@$(NORMAL_UNINSTALL)
@list='$(lib_LIBRARIES)'; for p in $$list; do \
p=$(am__strip_dir) \
echo " rm -f '$(DESTDIR)$(libdir)/$$p'"; \
rm -f "$(DESTDIR)$(libdir)/$$p"; \
done
clean-libLIBRARIES:
-test -z "$(lib_LIBRARIES)" || rm -f $(lib_LIBRARIES)
clean-noinstLIBRARIES:
-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
uniwidth/$(am__dirstamp):
@$(MKDIR_P) uniwidth
@: > uniwidth/$(am__dirstamp)
uniwidth/$(DEPDIR)/$(am__dirstamp):
@$(MKDIR_P) uniwidth/$(DEPDIR)
@: > uniwidth/$(DEPDIR)/$(am__dirstamp)
uniwidth/width.$(OBJEXT): uniwidth/$(am__dirstamp) \
uniwidth/$(DEPDIR)/$(am__dirstamp)
libbison.a: $(libbison_a_OBJECTS) $(libbison_a_DEPENDENCIES)
-rm -f libbison.a
$(libbison_a_AR) libbison.a $(libbison_a_OBJECTS) $(libbison_a_LIBADD)
$(RANLIB) libbison.a
liby.a: $(liby_a_OBJECTS) $(liby_a_DEPENDENCIES)
-rm -f liby.a
$(liby_a_AR) liby.a $(liby_a_OBJECTS) $(liby_a_LIBADD)
$(RANLIB) liby.a
clean-noinstLTLIBRARIES:
-test -z "$(noinst_LTLIBRARIES)" || rm -f $(noinst_LTLIBRARIES)
@list='$(noinst_LTLIBRARIES)'; for p in $$list; do \
dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \
test "$$dir" != "$$p" || dir=.; \
echo "rm -f \"$${dir}/so_locations\""; \
rm -f "$${dir}/so_locations"; \
done
mostlyclean-compile:
-rm -f *.$(OBJEXT)
-rm -f uniwidth/width.$(OBJEXT)
distclean-compile:
-rm -f *.tab.c
include ./$(DEPDIR)/abitset.Po
include ./$(DEPDIR)/argmatch.Po
include ./$(DEPDIR)/basename.Po
include ./$(DEPDIR)/bitset.Po
include ./$(DEPDIR)/bitset_stats.Po
include ./$(DEPDIR)/bitsetv-print.Po
include ./$(DEPDIR)/bitsetv.Po
include ./$(DEPDIR)/c-ctype.Po
include ./$(DEPDIR)/c-strcasecmp.Po
include ./$(DEPDIR)/c-strncasecmp.Po
include ./$(DEPDIR)/dirname.Po
include ./$(DEPDIR)/dup-safer.Po
include ./$(DEPDIR)/ebitset.Po
include ./$(DEPDIR)/error.Po
include ./$(DEPDIR)/exitfail.Po
include ./$(DEPDIR)/fd-safer.Po
include ./$(DEPDIR)/fopen-safer.Po
include ./$(DEPDIR)/get-errno.Po
include ./$(DEPDIR)/getopt.Po
include ./$(DEPDIR)/getopt1.Po
include ./$(DEPDIR)/hash.Po
include ./$(DEPDIR)/lbitset.Po
include ./$(DEPDIR)/localcharset.Po
include ./$(DEPDIR)/main.Po
include ./$(DEPDIR)/malloc.Po
include ./$(DEPDIR)/mbswidth.Po
include ./$(DEPDIR)/obstack.Po
include ./$(DEPDIR)/pipe-safer.Po
include ./$(DEPDIR)/quote.Po
include ./$(DEPDIR)/quotearg.Po
include ./$(DEPDIR)/stpcpy.Po
include ./$(DEPDIR)/strerror.Po
include ./$(DEPDIR)/stripslash.Po
include ./$(DEPDIR)/strndup.Po
include ./$(DEPDIR)/strnlen.Po
include ./$(DEPDIR)/strtol.Po
include ./$(DEPDIR)/strtoul.Po
include ./$(DEPDIR)/strverscmp.Po
include ./$(DEPDIR)/subpipe.Po
include ./$(DEPDIR)/timevar.Po
include ./$(DEPDIR)/unsetenv.Po
include ./$(DEPDIR)/vbitset.Po
include ./$(DEPDIR)/wcwidth.Po
include ./$(DEPDIR)/xalloc-die.Po
include ./$(DEPDIR)/xmalloc.Po
include ./$(DEPDIR)/xstrndup.Po
include ./$(DEPDIR)/yyerror.Po
include uniwidth/$(DEPDIR)/width.Po
.c.o:
depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.o$$||'`;\
$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ $< &&\
mv -f $$depbase.Tpo $$depbase.Po
# source='$<' object='$@' libtool=no \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(COMPILE) -c -o $@ $<
.c.obj:
depbase=`echo $@ | sed 's|[^/]*$$|$(DEPDIR)/&|;s|\.obj$$||'`;\
$(COMPILE) -MT $@ -MD -MP -MF $$depbase.Tpo -c -o $@ `$(CYGPATH_W) '$<'` &&\
mv -f $$depbase.Tpo $$depbase.Po
# source='$<' object='$@' libtool=no \
# DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) \
# $(COMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
# (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
target=`echo $@ | sed s/-recursive//`; \
list='$(SUBDIRS)'; for subdir in $$list; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
dot_seen=yes; \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done; \
if test "$$dot_seen" = "no"; then \
$(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
fi; test -z "$$fail"
$(RECURSIVE_CLEAN_TARGETS):
@failcom='exit 1'; \
for f in x $$MAKEFLAGS; do \
case $$f in \
*=* | --[!k]*);; \
*k*) failcom='fail=yes';; \
esac; \
done; \
dot_seen=no; \
case "$@" in \
distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
*) list='$(SUBDIRS)' ;; \
esac; \
rev=''; for subdir in $$list; do \
if test "$$subdir" = "."; then :; else \
rev="$$subdir $$rev"; \
fi; \
done; \
rev="$$rev ."; \
target=`echo $@ | sed s/-recursive//`; \
for subdir in $$rev; do \
echo "Making $$target in $$subdir"; \
if test "$$subdir" = "."; then \
local_target="$$target-am"; \
else \
local_target="$$target"; \
fi; \
(cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
|| eval $$failcom; \
done && test -z "$$fail"
tags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
done
ctags-recursive:
list='$(SUBDIRS)'; for subdir in $$list; do \
test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
done
ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
mkid -fID $$unique
tags: TAGS
TAGS: tags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
here=`pwd`; \
if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
include_option=--etags-include; \
empty_fix=.; \
else \
include_option=--include; \
empty_fix=; \
fi; \
list='$(SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test ! -f $$subdir/TAGS || \
tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
fi; \
done; \
list='$(SOURCES) $(HEADERS) config.hin $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
test -n "$$unique" || unique=$$empty_fix; \
$(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
$$tags $$unique; \
fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.hin $(TAGS_DEPENDENCIES) \
$(TAGS_FILES) $(LISP)
tags=; \
list='$(SOURCES) $(HEADERS) config.hin $(LISP) $(TAGS_FILES)'; \
unique=`for i in $$list; do \
if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
done | \
$(AWK) '{ files[$$0] = 1; nonempty = 1; } \
END { if (nonempty) { for (i in files) print i; }; }'`; \
test -z "$(CTAGS_ARGS)$$tags$$unique" \
|| $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
$$tags $$unique
GTAGS:
here=`$(am__cd) $(top_builddir) && pwd` \
&& cd $(top_srcdir) \
&& gtags -i $(GTAGS_ARGS) $$here
distclean-tags:
-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
distdir: $(DISTFILES)
@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
list='$(DISTFILES)'; \
dist_files=`for file in $$list; do echo $$file; done | \
sed -e "s|^$$srcdirstrip/||;t" \
-e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
case $$dist_files in \
*/*) $(MKDIR_P) `echo "$$dist_files" | \
sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
sort -u` ;; \
esac; \
for file in $$dist_files; do \
if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
if test -d $$d/$$file; then \
dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
fi; \
cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
else \
test -f $(distdir)/$$file \
|| cp -p $$d/$$file $(distdir)/$$file \
|| exit 1; \
fi; \
done
list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
if test "$$subdir" = .; then :; else \
test -d "$(distdir)/$$subdir" \
|| $(MKDIR_P) "$(distdir)/$$subdir" \
|| exit 1; \
distdir=`$(am__cd) $(distdir) && pwd`; \
top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
(cd $$subdir && \
$(MAKE) $(AM_MAKEFLAGS) \
top_distdir="$$top_distdir" \
distdir="$$distdir/$$subdir" \
am__remove_distdir=: \
am__skip_length_check=: \
distdir) \
|| exit 1; \
fi; \
done
check-am: all-am
check: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(LIBRARIES) $(LTLIBRARIES) $(HEADERS) config.h \
all-local
installdirs: installdirs-recursive
installdirs-am:
for dir in "$(DESTDIR)$(libdir)"; do \
test -z "$$dir" || $(MKDIR_P) "$$dir"; \
done
install: $(BUILT_SOURCES)
$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive
install-am: all-am
@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
installcheck: installcheck-recursive
install-strip:
$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
`test -z '$(STRIP)' || \
echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:
-test -z "$(MOSTLYCLEANFILES)" || rm -f $(MOSTLYCLEANFILES)
clean-generic:
-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
distclean-generic:
-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-rm -f uniwidth/$(DEPDIR)/$(am__dirstamp)
-rm -f uniwidth/$(am__dirstamp)
-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
maintainer-clean-generic:
@echo "This command is intended for maintainers to use"
@echo "it deletes files that may require special tools to rebuild."
-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive
clean-am: clean-generic clean-libLIBRARIES clean-noinstLIBRARIES \
clean-noinstLTLIBRARIES mostlyclean-am
distclean: distclean-recursive
-rm -rf ./$(DEPDIR) uniwidth/$(DEPDIR)
-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
distclean-hdr distclean-local distclean-tags
dvi: dvi-recursive
dvi-am:
html: html-recursive
info: info-recursive
info-am:
install-data-am:
install-dvi: install-dvi-recursive
install-exec-am: install-exec-local install-libLIBRARIES
install-html: install-html-recursive
install-info: install-info-recursive
install-man:
install-pdf: install-pdf-recursive
install-ps: install-ps-recursive
installcheck-am:
maintainer-clean: maintainer-clean-recursive
-rm -rf ./$(DEPDIR) uniwidth/$(DEPDIR)
-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-generic
mostlyclean: mostlyclean-recursive
mostlyclean-am: mostlyclean-compile mostlyclean-generic \
mostlyclean-local
pdf: pdf-recursive
pdf-am:
ps: ps-recursive
ps-am:
uninstall-am: uninstall-libLIBRARIES uninstall-local
.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \
install-strip
.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
all all-am all-local check check-am clean clean-generic \
clean-libLIBRARIES clean-noinstLIBRARIES \
clean-noinstLTLIBRARIES ctags ctags-recursive distclean \
distclean-compile distclean-generic distclean-hdr \
distclean-local distclean-tags distdir dvi dvi-am html html-am \
info info-am install install-am install-data install-data-am \
install-dvi install-dvi-am install-exec install-exec-am \
install-exec-local install-html install-html-am install-info \
install-info-am install-libLIBRARIES install-man install-pdf \
install-pdf-am install-ps install-ps-am install-strip \
installcheck installcheck-am installdirs installdirs-am \
maintainer-clean maintainer-clean-generic mostlyclean \
mostlyclean-compile mostlyclean-generic mostlyclean-local pdf \
pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \
uninstall-libLIBRARIES uninstall-local
# Retrieve values of the variables through 'configure' followed by
# 'make', not directly through 'configure', so that a user who
# sets some of these variables consistently on the 'make' command
# line gets correct results.
#
# One advantage of this approach, compared to the classical
# approach of adding -DLIBDIR=\"$(libdir)\" etc. to AM_CPPFLAGS,
# is that it protects against the use of undefined variables.
# If, say, $(libdir) is not set in the Makefile, LIBDIR is not
# defined by this module, and code using LIBDIR gives a
# compilation error.
#
# Another advantage is that 'make' output is shorter.
#
# Listed in the same order as the GNU makefile conventions.
# The Automake-defined pkg* macros are appended, in the order
# listed in the Automake 1.10a+ documentation.
configmake.h: Makefile
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
echo '#define PREFIX "$(prefix)"'; \
echo '#define EXEC_PREFIX "$(exec_prefix)"'; \
echo '#define BINDIR "$(bindir)"'; \
echo '#define SBINDIR "$(sbindir)"'; \
echo '#define LIBEXECDIR "$(libexecdir)"'; \
echo '#define DATAROOTDIR "$(datarootdir)"'; \
echo '#define DATADIR "$(datadir)"'; \
echo '#define SYSCONFDIR "$(sysconfdir)"'; \
echo '#define SHAREDSTATEDIR "$(sharedstatedir)"'; \
echo '#define LOCALSTATEDIR "$(localstatedir)"'; \
echo '#define INCLUDEDIR "$(includedir)"'; \
echo '#define OLDINCLUDEDIR "$(oldincludedir)"'; \
echo '#define DOCDIR "$(docdir)"'; \
echo '#define INFODIR "$(infodir)"'; \
echo '#define HTMLDIR "$(htmldir)"'; \
echo '#define DVIDIR "$(dvidir)"'; \
echo '#define PDFDIR "$(pdfdir)"'; \
echo '#define PSDIR "$(psdir)"'; \
echo '#define LIBDIR "$(libdir)"'; \
echo '#define LISPDIR "$(lispdir)"'; \
echo '#define LOCALEDIR "$(localedir)"'; \
echo '#define MANDIR "$(mandir)"'; \
echo '#define MANEXT "$(manext)"'; \
echo '#define PKGDATADIR "$(pkgdatadir)"'; \
echo '#define PKGINCLUDEDIR "$(pkgincludedir)"'; \
echo '#define PKGLIBDIR "$(pkglibdir)"'; \
echo '#define PKGLIBEXECDIR "$(pkglibexecdir)"'; \
} | sed '/""/d' > $@-t
mv $@-t $@
# We need the following in order to create <errno.h> when the system
# doesn't have one that is POSIX compliant.
errno.h: errno.in.h
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
sed -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \
-e 's|@''NEXT_ERRNO_H''@|$(NEXT_ERRNO_H)|g' \
-e 's|@''EMULTIHOP_HIDDEN''@|$(EMULTIHOP_HIDDEN)|g' \
-e 's|@''EMULTIHOP_VALUE''@|$(EMULTIHOP_VALUE)|g' \
-e 's|@''ENOLINK_HIDDEN''@|$(ENOLINK_HIDDEN)|g' \
-e 's|@''ENOLINK_VALUE''@|$(ENOLINK_VALUE)|g' \
-e 's|@''EOVERFLOW_HIDDEN''@|$(EOVERFLOW_HIDDEN)|g' \
-e 's|@''EOVERFLOW_VALUE''@|$(EOVERFLOW_VALUE)|g' \
< $(srcdir)/errno.in.h; \
} > $@-t
mv $@-t $@
# We need the following in order to create <getopt.h> when the system
# doesn't have one that works with the given compiler.
getopt.h: getopt.in.h
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
cat $(srcdir)/getopt.in.h; \
} > $@-t
mv -f $@-t $@
distclean-local: clean-GNUmakefile
clean-GNUmakefile:
test x'$(VPATH)' != x && rm -f $(top_builddir)/GNUmakefile || :
# We need the following in order to create <inttypes.h> when the system
# doesn't have one that works with the given compiler.
inttypes.h: inttypes.in.h
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
sed -e 's/@''HAVE_INTTYPES_H''@/$(HAVE_INTTYPES_H)/g' \
-e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \
-e 's|@''NEXT_INTTYPES_H''@|$(NEXT_INTTYPES_H)|g' \
-e 's/@''PRI_MACROS_BROKEN''@/$(PRI_MACROS_BROKEN)/g' \
-e 's/@''HAVE_LONG_LONG_INT''@/$(HAVE_LONG_LONG_INT)/g' \
-e 's/@''HAVE_UNSIGNED_LONG_LONG_INT''@/$(HAVE_UNSIGNED_LONG_LONG_INT)/g' \
-e 's/@''PRIPTR_PREFIX''@/$(PRIPTR_PREFIX)/g' \
-e 's/@''GNULIB_IMAXABS''@/$(GNULIB_IMAXABS)/g' \
-e 's/@''GNULIB_IMAXDIV''@/$(GNULIB_IMAXDIV)/g' \
-e 's/@''GNULIB_STRTOIMAX''@/$(GNULIB_STRTOIMAX)/g' \
-e 's/@''GNULIB_STRTOUMAX''@/$(GNULIB_STRTOUMAX)/g' \
-e 's/@''HAVE_DECL_IMAXABS''@/$(HAVE_DECL_IMAXABS)/g' \
-e 's/@''HAVE_DECL_IMAXDIV''@/$(HAVE_DECL_IMAXDIV)/g' \
-e 's/@''HAVE_DECL_STRTOIMAX''@/$(HAVE_DECL_STRTOIMAX)/g' \
-e 's/@''HAVE_DECL_STRTOUMAX''@/$(HAVE_DECL_STRTOUMAX)/g' \
-e 's/@''INT32_MAX_LT_INTMAX_MAX''@/$(INT32_MAX_LT_INTMAX_MAX)/g' \
-e 's/@''INT64_MAX_EQ_LONG_MAX''@/$(INT64_MAX_EQ_LONG_MAX)/g' \
-e 's/@''UINT32_MAX_LT_UINTMAX_MAX''@/$(UINT32_MAX_LT_UINTMAX_MAX)/g' \
-e 's/@''UINT64_MAX_EQ_ULONG_MAX''@/$(UINT64_MAX_EQ_ULONG_MAX)/g' \
-e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \
< $(srcdir)/inttypes.in.h; \
} > $@-t
mv $@-t $@
# We need the following in order to install a simple file in $(libdir)
# which is shared with other installed packages. We use a list of referencing
# packages so that "make uninstall" will remove the file if and only if it
# is not used by another installed package.
# On systems with glibc-2.1 or newer, the file is redundant, therefore we
# avoid installing it.
all-local: charset.alias ref-add.sed ref-del.sed
install-exec-local: all-local
test $(GLIBC21) != no || $(mkinstalldirs) $(DESTDIR)$(libdir)
if test -f $(charset_alias); then \
sed -f ref-add.sed $(charset_alias) > $(charset_tmp) ; \
$(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \
rm -f $(charset_tmp) ; \
else \
if test $(GLIBC21) = no; then \
sed -f ref-add.sed charset.alias > $(charset_tmp) ; \
$(INSTALL_DATA) $(charset_tmp) $(charset_alias) ; \
rm -f $(charset_tmp) ; \
fi ; \
fi
uninstall-local: all-local
if test -f $(charset_alias); then \
sed -f ref-del.sed $(charset_alias) > $(charset_tmp); \
if grep '^# Packages using this file: $$' $(charset_tmp) \
> /dev/null; then \
rm -f $(charset_alias); \
else \
$(INSTALL_DATA) $(charset_tmp) $(charset_alias); \
fi; \
rm -f $(charset_tmp); \
fi
charset.alias: config.charset
rm -f t-$@ $@
$(SHELL) $(srcdir)/config.charset '$(host)' > t-$@
mv t-$@ $@
.sin.sed:
rm -f t-$@ $@
sed -e '/^#/d' -e 's/@''PACKAGE''@/$(PACKAGE)/g' $< > t-$@
mv t-$@ $@
# We need the following in order to create <stdbool.h> when the system
# doesn't have one that works.
stdbool.h: stdbool.in.h
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
sed -e 's/@''HAVE__BOOL''@/$(HAVE__BOOL)/g' < $(srcdir)/stdbool.in.h; \
} > $@-t
mv $@-t $@
# We need the following in order to create <stdint.h> when the system
# doesn't have one that works with the given compiler.
stdint.h: stdint.in.h
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
sed -e 's/@''HAVE_STDINT_H''@/$(HAVE_STDINT_H)/g' \
-e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \
-e 's|@''NEXT_STDINT_H''@|$(NEXT_STDINT_H)|g' \
-e 's/@''HAVE_SYS_TYPES_H''@/$(HAVE_SYS_TYPES_H)/g' \
-e 's/@''HAVE_INTTYPES_H''@/$(HAVE_INTTYPES_H)/g' \
-e 's/@''HAVE_SYS_INTTYPES_H''@/$(HAVE_SYS_INTTYPES_H)/g' \
-e 's/@''HAVE_SYS_BITYPES_H''@/$(HAVE_SYS_BITYPES_H)/g' \
-e 's/@''HAVE_LONG_LONG_INT''@/$(HAVE_LONG_LONG_INT)/g' \
-e 's/@''HAVE_UNSIGNED_LONG_LONG_INT''@/$(HAVE_UNSIGNED_LONG_LONG_INT)/g' \
-e 's/@''BITSIZEOF_PTRDIFF_T''@/$(BITSIZEOF_PTRDIFF_T)/g' \
-e 's/@''PTRDIFF_T_SUFFIX''@/$(PTRDIFF_T_SUFFIX)/g' \
-e 's/@''BITSIZEOF_SIG_ATOMIC_T''@/$(BITSIZEOF_SIG_ATOMIC_T)/g' \
-e 's/@''HAVE_SIGNED_SIG_ATOMIC_T''@/$(HAVE_SIGNED_SIG_ATOMIC_T)/g' \
-e 's/@''SIG_ATOMIC_T_SUFFIX''@/$(SIG_ATOMIC_T_SUFFIX)/g' \
-e 's/@''BITSIZEOF_SIZE_T''@/$(BITSIZEOF_SIZE_T)/g' \
-e 's/@''SIZE_T_SUFFIX''@/$(SIZE_T_SUFFIX)/g' \
-e 's/@''BITSIZEOF_WCHAR_T''@/$(BITSIZEOF_WCHAR_T)/g' \
-e 's/@''HAVE_SIGNED_WCHAR_T''@/$(HAVE_SIGNED_WCHAR_T)/g' \
-e 's/@''WCHAR_T_SUFFIX''@/$(WCHAR_T_SUFFIX)/g' \
-e 's/@''BITSIZEOF_WINT_T''@/$(BITSIZEOF_WINT_T)/g' \
-e 's/@''HAVE_SIGNED_WINT_T''@/$(HAVE_SIGNED_WINT_T)/g' \
-e 's/@''WINT_T_SUFFIX''@/$(WINT_T_SUFFIX)/g' \
< $(srcdir)/stdint.in.h; \
} > $@-t
mv $@-t $@
# We need the following in order to create <stdlib.h> when the system
# doesn't have one that works with the given compiler.
stdlib.h: stdlib.in.h
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
sed -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \
-e 's|@''NEXT_STDLIB_H''@|$(NEXT_STDLIB_H)|g' \
-e 's|@''GNULIB_MALLOC_POSIX''@|$(GNULIB_MALLOC_POSIX)|g' \
-e 's|@''GNULIB_REALLOC_POSIX''@|$(GNULIB_REALLOC_POSIX)|g' \
-e 's|@''GNULIB_CALLOC_POSIX''@|$(GNULIB_CALLOC_POSIX)|g' \
-e 's|@''GNULIB_ATOLL''@|$(GNULIB_ATOLL)|g' \
-e 's|@''GNULIB_GETLOADAVG''@|$(GNULIB_GETLOADAVG)|g' \
-e 's|@''GNULIB_GETSUBOPT''@|$(GNULIB_GETSUBOPT)|g' \
-e 's|@''GNULIB_MKDTEMP''@|$(GNULIB_MKDTEMP)|g' \
-e 's|@''GNULIB_MKSTEMP''@|$(GNULIB_MKSTEMP)|g' \
-e 's|@''GNULIB_PUTENV''@|$(GNULIB_PUTENV)|g' \
-e 's|@''GNULIB_RANDOM_R''@|$(GNULIB_RANDOM_R)|g' \
-e 's|@''GNULIB_RPMATCH''@|$(GNULIB_RPMATCH)|g' \
-e 's|@''GNULIB_SETENV''@|$(GNULIB_SETENV)|g' \
-e 's|@''GNULIB_STRTOD''@|$(GNULIB_STRTOD)|g' \
-e 's|@''GNULIB_STRTOLL''@|$(GNULIB_STRTOLL)|g' \
-e 's|@''GNULIB_STRTOULL''@|$(GNULIB_STRTOULL)|g' \
-e 's|@''GNULIB_UNSETENV''@|$(GNULIB_UNSETENV)|g' \
-e 's|@''HAVE_ATOLL''@|$(HAVE_ATOLL)|g' \
-e 's|@''HAVE_CALLOC_POSIX''@|$(HAVE_CALLOC_POSIX)|g' \
-e 's|@''HAVE_GETSUBOPT''@|$(HAVE_GETSUBOPT)|g' \
-e 's|@''HAVE_MALLOC_POSIX''@|$(HAVE_MALLOC_POSIX)|g' \
-e 's|@''HAVE_MKDTEMP''@|$(HAVE_MKDTEMP)|g' \
-e 's|@''HAVE_REALLOC_POSIX''@|$(HAVE_REALLOC_POSIX)|g' \
-e 's|@''HAVE_RANDOM_R''@|$(HAVE_RANDOM_R)|g' \
-e 's|@''HAVE_RPMATCH''@|$(HAVE_RPMATCH)|g' \
-e 's|@''HAVE_SETENV''@|$(HAVE_SETENV)|g' \
-e 's|@''HAVE_STRTOD''@|$(HAVE_STRTOD)|g' \
-e 's|@''HAVE_STRTOLL''@|$(HAVE_STRTOLL)|g' \
-e 's|@''HAVE_STRTOULL''@|$(HAVE_STRTOULL)|g' \
-e 's|@''HAVE_STRUCT_RANDOM_DATA''@|$(HAVE_STRUCT_RANDOM_DATA)|g' \
-e 's|@''HAVE_SYS_LOADAVG_H''@|$(HAVE_SYS_LOADAVG_H)|g' \
-e 's|@''HAVE_UNSETENV''@|$(HAVE_UNSETENV)|g' \
-e 's|@''HAVE_DECL_GETLOADAVG''@|$(HAVE_DECL_GETLOADAVG)|g' \
-e 's|@''REPLACE_MKSTEMP''@|$(REPLACE_MKSTEMP)|g' \
-e 's|@''REPLACE_PUTENV''@|$(REPLACE_PUTENV)|g' \
-e 's|@''REPLACE_STRTOD''@|$(REPLACE_STRTOD)|g' \
-e 's|@''VOID_UNSETENV''@|$(VOID_UNSETENV)|g' \
-e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \
< $(srcdir)/stdlib.in.h; \
} > $@-t
mv $@-t $@
# We need the following in order to create <string.h> when the system
# doesn't have one that works with the given compiler.
string.h: string.in.h
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */' && \
sed -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \
-e 's|@''NEXT_STRING_H''@|$(NEXT_STRING_H)|g' \
-e 's|@''GNULIB_MBSLEN''@|$(GNULIB_MBSLEN)|g' \
-e 's|@''GNULIB_MBSNLEN''@|$(GNULIB_MBSNLEN)|g' \
-e 's|@''GNULIB_MBSCHR''@|$(GNULIB_MBSCHR)|g' \
-e 's|@''GNULIB_MBSRCHR''@|$(GNULIB_MBSRCHR)|g' \
-e 's|@''GNULIB_MBSSTR''@|$(GNULIB_MBSSTR)|g' \
-e 's|@''GNULIB_MBSCASECMP''@|$(GNULIB_MBSCASECMP)|g' \
-e 's|@''GNULIB_MBSNCASECMP''@|$(GNULIB_MBSNCASECMP)|g' \
-e 's|@''GNULIB_MBSPCASECMP''@|$(GNULIB_MBSPCASECMP)|g' \
-e 's|@''GNULIB_MBSCASESTR''@|$(GNULIB_MBSCASESTR)|g' \
-e 's|@''GNULIB_MBSCSPN''@|$(GNULIB_MBSCSPN)|g' \
-e 's|@''GNULIB_MBSPBRK''@|$(GNULIB_MBSPBRK)|g' \
-e 's|@''GNULIB_MBSSPN''@|$(GNULIB_MBSSPN)|g' \
-e 's|@''GNULIB_MBSSEP''@|$(GNULIB_MBSSEP)|g' \
-e 's|@''GNULIB_MBSTOK_R''@|$(GNULIB_MBSTOK_R)|g' \
-e 's|@''GNULIB_MEMMEM''@|$(GNULIB_MEMMEM)|g' \
-e 's|@''GNULIB_MEMPCPY''@|$(GNULIB_MEMPCPY)|g' \
-e 's|@''GNULIB_MEMRCHR''@|$(GNULIB_MEMRCHR)|g' \
-e 's|@''GNULIB_RAWMEMCHR''@|$(GNULIB_RAWMEMCHR)|g' \
-e 's|@''GNULIB_STPCPY''@|$(GNULIB_STPCPY)|g' \
-e 's|@''GNULIB_STPNCPY''@|$(GNULIB_STPNCPY)|g' \
-e 's|@''GNULIB_STRCHRNUL''@|$(GNULIB_STRCHRNUL)|g' \
-e 's|@''GNULIB_STRDUP''@|$(GNULIB_STRDUP)|g' \
-e 's|@''GNULIB_STRNDUP''@|$(GNULIB_STRNDUP)|g' \
-e 's|@''GNULIB_STRNLEN''@|$(GNULIB_STRNLEN)|g' \
-e 's|@''GNULIB_STRPBRK''@|$(GNULIB_STRPBRK)|g' \
-e 's|@''GNULIB_STRSEP''@|$(GNULIB_STRSEP)|g' \
-e 's|@''GNULIB_STRSTR''@|$(GNULIB_STRSTR)|g' \
-e 's|@''GNULIB_STRCASESTR''@|$(GNULIB_STRCASESTR)|g' \
-e 's|@''GNULIB_STRTOK_R''@|$(GNULIB_STRTOK_R)|g' \
-e 's|@''GNULIB_STRERROR''@|$(GNULIB_STRERROR)|g' \
-e 's|@''GNULIB_STRSIGNAL''@|$(GNULIB_STRSIGNAL)|g' \
-e 's|@''GNULIB_STRVERSCMP''@|$(GNULIB_STRVERSCMP)|g' \
-e 's|@''HAVE_DECL_MEMMEM''@|$(HAVE_DECL_MEMMEM)|g' \
-e 's|@''HAVE_MEMPCPY''@|$(HAVE_MEMPCPY)|g' \
-e 's|@''HAVE_DECL_MEMRCHR''@|$(HAVE_DECL_MEMRCHR)|g' \
-e 's|@''HAVE_RAWMEMCHR''@|$(HAVE_RAWMEMCHR)|g' \
-e 's|@''HAVE_STPCPY''@|$(HAVE_STPCPY)|g' \
-e 's|@''HAVE_STPNCPY''@|$(HAVE_STPNCPY)|g' \
-e 's|@''HAVE_STRCHRNUL''@|$(HAVE_STRCHRNUL)|g' \
-e 's|@''HAVE_DECL_STRDUP''@|$(HAVE_DECL_STRDUP)|g' \
-e 's|@''HAVE_STRNDUP''@|$(HAVE_STRNDUP)|g' \
-e 's|@''HAVE_DECL_STRNDUP''@|$(HAVE_DECL_STRNDUP)|g' \
-e 's|@''HAVE_DECL_STRNLEN''@|$(HAVE_DECL_STRNLEN)|g' \
-e 's|@''HAVE_STRPBRK''@|$(HAVE_STRPBRK)|g' \
-e 's|@''HAVE_STRSEP''@|$(HAVE_STRSEP)|g' \
-e 's|@''HAVE_STRCASESTR''@|$(HAVE_STRCASESTR)|g' \
-e 's|@''HAVE_DECL_STRTOK_R''@|$(HAVE_DECL_STRTOK_R)|g' \
-e 's|@''HAVE_DECL_STRERROR''@|$(HAVE_DECL_STRERROR)|g' \
-e 's|@''HAVE_DECL_STRSIGNAL''@|$(HAVE_DECL_STRSIGNAL)|g' \
-e 's|@''HAVE_STRVERSCMP''@|$(HAVE_STRVERSCMP)|g' \
-e 's|@''REPLACE_MEMMEM''@|$(REPLACE_MEMMEM)|g' \
-e 's|@''REPLACE_STRCASESTR''@|$(REPLACE_STRCASESTR)|g' \
-e 's|@''REPLACE_STRDUP''@|$(REPLACE_STRDUP)|g' \
-e 's|@''REPLACE_STRSTR''@|$(REPLACE_STRSTR)|g' \
-e 's|@''REPLACE_STRERROR''@|$(REPLACE_STRERROR)|g' \
-e 's|@''REPLACE_STRSIGNAL''@|$(REPLACE_STRSIGNAL)|g' \
-e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \
< $(srcdir)/string.in.h; \
} > $@-t
mv $@-t $@
# We need the following in order to create an empty placeholder for
# <unistd.h> when the system doesn't have one.
unistd.h: unistd.in.h
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
sed -e 's|@''HAVE_UNISTD_H''@|$(HAVE_UNISTD_H)|g' \
-e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \
-e 's|@''NEXT_UNISTD_H''@|$(NEXT_UNISTD_H)|g' \
-e 's|@''GNULIB_CHOWN''@|$(GNULIB_CHOWN)|g' \
-e 's|@''GNULIB_CLOSE''@|$(GNULIB_CLOSE)|g' \
-e 's|@''GNULIB_DUP2''@|$(GNULIB_DUP2)|g' \
-e 's|@''GNULIB_ENVIRON''@|$(GNULIB_ENVIRON)|g' \
-e 's|@''GNULIB_EUIDACCESS''@|$(GNULIB_EUIDACCESS)|g' \
-e 's|@''GNULIB_FCHDIR''@|$(GNULIB_FCHDIR)|g' \
-e 's|@''GNULIB_FSYNC''@|$(GNULIB_FSYNC)|g' \
-e 's|@''GNULIB_FTRUNCATE''@|$(GNULIB_FTRUNCATE)|g' \
-e 's|@''GNULIB_GETCWD''@|$(GNULIB_GETCWD)|g' \
-e 's|@''GNULIB_GETDOMAINNAME''@|$(GNULIB_GETDOMAINNAME)|g' \
-e 's|@''GNULIB_GETDTABLESIZE''@|$(GNULIB_GETDTABLESIZE)|g' \
-e 's|@''GNULIB_GETHOSTNAME''@|$(GNULIB_GETHOSTNAME)|g' \
-e 's|@''GNULIB_GETLOGIN_R''@|$(GNULIB_GETLOGIN_R)|g' \
-e 's|@''GNULIB_GETPAGESIZE''@|$(GNULIB_GETPAGESIZE)|g' \
-e 's|@''GNULIB_GETUSERSHELL''@|$(GNULIB_GETUSERSHELL)|g' \
-e 's|@''GNULIB_LCHOWN''@|$(GNULIB_LCHOWN)|g' \
-e 's|@''GNULIB_LSEEK''@|$(GNULIB_LSEEK)|g' \
-e 's|@''GNULIB_READLINK''@|$(GNULIB_READLINK)|g' \
-e 's|@''GNULIB_SLEEP''@|$(GNULIB_SLEEP)|g' \
-e 's|@''GNULIB_UNISTD_H_SIGPIPE''@|$(GNULIB_UNISTD_H_SIGPIPE)|g' \
-e 's|@''GNULIB_WRITE''@|$(GNULIB_WRITE)|g' \
-e 's|@''HAVE_DUP2''@|$(HAVE_DUP2)|g' \
-e 's|@''HAVE_EUIDACCESS''@|$(HAVE_EUIDACCESS)|g' \
-e 's|@''HAVE_FSYNC''@|$(HAVE_FSYNC)|g' \
-e 's|@''HAVE_FTRUNCATE''@|$(HAVE_FTRUNCATE)|g' \
-e 's|@''HAVE_GETDOMAINNAME''@|$(HAVE_GETDOMAINNAME)|g' \
-e 's|@''HAVE_GETDTABLESIZE''@|$(HAVE_GETDTABLESIZE)|g' \
-e 's|@''HAVE_GETHOSTNAME''@|$(HAVE_GETHOSTNAME)|g' \
-e 's|@''HAVE_GETPAGESIZE''@|$(HAVE_GETPAGESIZE)|g' \
-e 's|@''HAVE_GETUSERSHELL''@|$(HAVE_GETUSERSHELL)|g' \
-e 's|@''HAVE_READLINK''@|$(HAVE_READLINK)|g' \
-e 's|@''HAVE_SLEEP''@|$(HAVE_SLEEP)|g' \
-e 's|@''HAVE_DECL_ENVIRON''@|$(HAVE_DECL_ENVIRON)|g' \
-e 's|@''HAVE_DECL_GETLOGIN_R''@|$(HAVE_DECL_GETLOGIN_R)|g' \
-e 's|@''HAVE_OS_H''@|$(HAVE_OS_H)|g' \
-e 's|@''HAVE_SYS_PARAM_H''@|$(HAVE_SYS_PARAM_H)|g' \
-e 's|@''REPLACE_CHOWN''@|$(REPLACE_CHOWN)|g' \
-e 's|@''REPLACE_CLOSE''@|$(REPLACE_CLOSE)|g' \
-e 's|@''REPLACE_FCHDIR''@|$(REPLACE_FCHDIR)|g' \
-e 's|@''REPLACE_GETCWD''@|$(REPLACE_GETCWD)|g' \
-e 's|@''REPLACE_GETPAGESIZE''@|$(REPLACE_GETPAGESIZE)|g' \
-e 's|@''REPLACE_LCHOWN''@|$(REPLACE_LCHOWN)|g' \
-e 's|@''REPLACE_LSEEK''@|$(REPLACE_LSEEK)|g' \
-e 's|@''REPLACE_WRITE''@|$(REPLACE_WRITE)|g' \
-e 's|@''UNISTD_H_HAVE_WINSOCK2_H''@|$(UNISTD_H_HAVE_WINSOCK2_H)|g' \
-e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \
< $(srcdir)/unistd.in.h; \
} > $@-t
mv $@-t $@
# We need the following in order to create <wchar.h> when the system
# version does not work standalone.
wchar.h: wchar.in.h
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
sed -e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \
-e 's|@''NEXT_WCHAR_H''@|$(NEXT_WCHAR_H)|g' \
-e 's/@''HAVE_WCHAR_H''@/$(HAVE_WCHAR_H)/g' \
-e 's|@''GNULIB_WCWIDTH''@|$(GNULIB_WCWIDTH)|g' \
-e 's/@''HAVE_WINT_T''@/$(HAVE_WINT_T)/g' \
-e 's|@''HAVE_DECL_WCWIDTH''@|$(HAVE_DECL_WCWIDTH)|g' \
-e 's|@''REPLACE_WCWIDTH''@|$(REPLACE_WCWIDTH)|g' \
-e '/definition of GL_LINK_WARNING/r $(LINK_WARNING_H)' \
< $(srcdir)/wchar.in.h; \
} > $@-t
mv $@-t $@
# We need the following in order to create <wctype.h> when the system
# doesn't have one that works with the given compiler.
wctype.h: wctype.in.h
rm -f $@-t $@
{ echo '/* DO NOT EDIT! GENERATED AUTOMATICALLY! */'; \
sed -e 's/@''HAVE_WCTYPE_H''@/$(HAVE_WCTYPE_H)/g' \
-e 's|@''INCLUDE_NEXT''@|$(INCLUDE_NEXT)|g' \
-e 's|@''PRAGMA_SYSTEM_HEADER''@|#pragma GCC system_header|g' \
-e 's|@''NEXT_WCTYPE_H''@|$(NEXT_WCTYPE_H)|g' \
-e 's/@''HAVE_ISWCNTRL''@/$(HAVE_ISWCNTRL)/g' \
-e 's/@''HAVE_WINT_T''@/$(HAVE_WINT_T)/g' \
-e 's/@''REPLACE_ISWCNTRL''@/$(REPLACE_ISWCNTRL)/g' \
< $(srcdir)/wctype.in.h; \
} > $@-t
mv $@-t $@
mostlyclean-local: mostlyclean-generic
@for dir in '' $(MOSTLYCLEANDIRS); do \
if test -n "$$dir" && test -d $$dir; then \
echo "rmdir $$dir"; rmdir $$dir; \
fi; \
done; \
:
# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: