| /* |
| * Copyright (c) 2010 The WebM project authors. All Rights Reserved. |
| * |
| * Use of this source code is governed by a BSD-style license |
| * that can be found in the LICENSE file in the root of the source |
| * tree. An additional intellectual property rights grant can be found |
| * in the file PATENTS. All contributing project authors may |
| * be found in the AUTHORS file in the root of the source tree. |
| */ |
| |
| |
| #include <limits.h> |
| #include "vpx_config.h" |
| #include "./vpx_dsp_rtcd.h" |
| #include "onyx_int.h" |
| #include "modecosts.h" |
| #include "encodeintra.h" |
| #include "vp8/common/common.h" |
| #include "vp8/common/entropymode.h" |
| #include "pickinter.h" |
| #include "vp8/common/findnearmv.h" |
| #include "encodemb.h" |
| #include "vp8/common/reconinter.h" |
| #include "vp8/common/reconintra4x4.h" |
| #include "vpx_dsp/variance.h" |
| #include "mcomp.h" |
| #include "rdopt.h" |
| #include "vpx_mem/vpx_mem.h" |
| #if CONFIG_TEMPORAL_DENOISING |
| #include "denoising.h" |
| #endif |
| |
| #ifdef SPEEDSTATS |
| extern unsigned int cnt_pm; |
| #endif |
| |
| extern const int vp8_ref_frame_order[MAX_MODES]; |
| extern const MB_PREDICTION_MODE vp8_mode_order[MAX_MODES]; |
| |
| // Fixed point implementation of a skin color classifier. Skin color |
| // is model by a Gaussian distribution in the CbCr color space. |
| // See ../../test/skin_color_detector_test.cc where the reference |
| // skin color classifier is defined. |
| |
| // Fixed-point skin color model parameters. |
| static const int skin_mean[2] = {7463, 9614}; // q6 |
| static const int skin_inv_cov[4] = {4107, 1663, 1663, 2157}; // q16 |
| static const int skin_threshold = 1570636; // q18 |
| |
| // Evaluates the Mahalanobis distance measure for the input CbCr values. |
| static int evaluate_skin_color_difference(int cb, int cr) |
| { |
| const int cb_q6 = cb << 6; |
| const int cr_q6 = cr << 6; |
| const int cb_diff_q12 = (cb_q6 - skin_mean[0]) * (cb_q6 - skin_mean[0]); |
| const int cbcr_diff_q12 = (cb_q6 - skin_mean[0]) * (cr_q6 - skin_mean[1]); |
| const int cr_diff_q12 = (cr_q6 - skin_mean[1]) * (cr_q6 - skin_mean[1]); |
| const int cb_diff_q2 = (cb_diff_q12 + (1 << 9)) >> 10; |
| const int cbcr_diff_q2 = (cbcr_diff_q12 + (1 << 9)) >> 10; |
| const int cr_diff_q2 = (cr_diff_q12 + (1 << 9)) >> 10; |
| const int skin_diff = skin_inv_cov[0] * cb_diff_q2 + |
| skin_inv_cov[1] * cbcr_diff_q2 + |
| skin_inv_cov[2] * cbcr_diff_q2 + |
| skin_inv_cov[3] * cr_diff_q2; |
| return skin_diff; |
| } |
| |
| static int macroblock_corner_grad(unsigned char* signal, int stride, |
| int offsetx, int offsety, int sgnx, int sgny) |
| { |
| int y1 = signal[offsetx * stride + offsety]; |
| int y2 = signal[offsetx * stride + offsety + sgny]; |
| int y3 = signal[(offsetx + sgnx) * stride + offsety]; |
| int y4 = signal[(offsetx + sgnx) * stride + offsety + sgny]; |
| return VPXMAX(VPXMAX(abs(y1 - y2), abs(y1 - y3)), abs(y1 - y4)); |
| } |
| |
| static int check_dot_artifact_candidate(VP8_COMP *cpi, |
| MACROBLOCK *x, |
| unsigned char *target_last, |
| int stride, |
| unsigned char* last_ref, |
| int mb_row, |
| int mb_col, |
| int channel) |
| { |
| int threshold1 = 6; |
| int threshold2 = 3; |
| unsigned int max_num = (cpi->common.MBs) / 10; |
| int grad_last = 0; |
| int grad_source = 0; |
| int index = mb_row * cpi->common.mb_cols + mb_col; |
| // Threshold for #consecutive (base layer) frames using zero_last mode. |
| int num_frames = 30; |
| int shift = 15; |
| if (channel > 0) { |
| shift = 7; |
| } |
| if (cpi->oxcf.number_of_layers > 1) |
| { |
| num_frames = 20; |
| } |
| x->zero_last_dot_suppress = 0; |
| // Blocks on base layer frames that have been using ZEROMV_LAST repeatedly |
| // (i.e, at least |x| consecutive frames are candidates for increasing the |
| // rd adjustment for zero_last mode. |
| // Only allow this for at most |max_num| blocks per frame. |
| // Don't allow this for screen content input. |
| if (cpi->current_layer == 0 && |
| cpi->consec_zero_last_mvbias[index] > num_frames && |
| x->mbs_zero_last_dot_suppress < max_num && |
| !cpi->oxcf.screen_content_mode) |
| { |
| // If this block is checked here, label it so we don't check it again until |
| // ~|x| framaes later. |
| x->zero_last_dot_suppress = 1; |
| // Dot artifact is noticeable as strong gradient at corners of macroblock, |
| // for flat areas. As a simple detector for now, we look for a high |
| // corner gradient on last ref, and a smaller gradient on source. |
| // Check 4 corners, return if any satisfy condition. |
| // Top-left: |
| grad_last = macroblock_corner_grad(last_ref, stride, 0, 0, 1, 1); |
| grad_source = macroblock_corner_grad(target_last, stride, 0, 0, 1, 1); |
| if (grad_last >= threshold1 && grad_source <= threshold2) |
| { |
| x->mbs_zero_last_dot_suppress++; |
| return 1; |
| } |
| // Top-right: |
| grad_last = macroblock_corner_grad(last_ref, stride, 0, shift, 1, -1); |
| grad_source = macroblock_corner_grad(target_last, stride, 0, shift, 1, -1); |
| if (grad_last >= threshold1 && grad_source <= threshold2) |
| { |
| x->mbs_zero_last_dot_suppress++; |
| return 1; |
| } |
| // Bottom-left: |
| grad_last = macroblock_corner_grad(last_ref, stride, shift, 0, -1, 1); |
| grad_source = macroblock_corner_grad(target_last, stride, shift, 0, -1, 1); |
| if (grad_last >= threshold1 && grad_source <= threshold2) |
| { |
| x->mbs_zero_last_dot_suppress++; |
| return 1; |
| } |
| // Bottom-right: |
| grad_last = macroblock_corner_grad(last_ref, stride, shift, shift, -1, -1); |
| grad_source = macroblock_corner_grad(target_last, stride, shift, shift, -1, -1); |
| if (grad_last >= threshold1 && grad_source <= threshold2) |
| { |
| x->mbs_zero_last_dot_suppress++; |
| return 1; |
| } |
| return 0; |
| } |
| return 0; |
| } |
| |
| // Checks if the input yCbCr values corresponds to skin color. |
| static int is_skin_color(int y, int cb, int cr) |
| { |
| if (y < 40 || y > 220) |
| { |
| return 0; |
| } |
| return (evaluate_skin_color_difference(cb, cr) < skin_threshold); |
| } |
| |
| int vp8_skip_fractional_mv_step(MACROBLOCK *mb, BLOCK *b, BLOCKD *d, |
| int_mv *bestmv, int_mv *ref_mv, |
| int error_per_bit, |
| const vp8_variance_fn_ptr_t *vfp, |
| int *mvcost[2], int *distortion, |
| unsigned int *sse) |
| { |
| (void) b; |
| (void) d; |
| (void) ref_mv; |
| (void) error_per_bit; |
| (void) vfp; |
| (void) mb; |
| (void) mvcost; |
| (void) distortion; |
| (void) sse; |
| bestmv->as_mv.row <<= 3; |
| bestmv->as_mv.col <<= 3; |
| return 0; |
| } |
| |
| |
| int vp8_get_inter_mbpred_error(MACROBLOCK *mb, |
| const vp8_variance_fn_ptr_t *vfp, |
| unsigned int *sse, |
| int_mv this_mv) |
| { |
| |
| BLOCK *b = &mb->block[0]; |
| BLOCKD *d = &mb->e_mbd.block[0]; |
| unsigned char *what = (*(b->base_src) + b->src); |
| int what_stride = b->src_stride; |
| int pre_stride = mb->e_mbd.pre.y_stride; |
| unsigned char *in_what = mb->e_mbd.pre.y_buffer + d->offset ; |
| int in_what_stride = pre_stride; |
| int xoffset = this_mv.as_mv.col & 7; |
| int yoffset = this_mv.as_mv.row & 7; |
| |
| in_what += (this_mv.as_mv.row >> 3) * pre_stride + (this_mv.as_mv.col >> 3); |
| |
| if (xoffset | yoffset) |
| { |
| return vfp->svf(in_what, in_what_stride, xoffset, yoffset, what, what_stride, sse); |
| } |
| else |
| { |
| return vfp->vf(what, what_stride, in_what, in_what_stride, sse); |
| } |
| |
| } |
| |
| static int get_prediction_error(BLOCK *be, BLOCKD *b) |
| { |
| unsigned char *sptr; |
| unsigned char *dptr; |
| sptr = (*(be->base_src) + be->src); |
| dptr = b->predictor; |
| |
| return vpx_get4x4sse_cs(sptr, be->src_stride, dptr, 16); |
| |
| } |
| |
| static int pick_intra4x4block( |
| MACROBLOCK *x, |
| int ib, |
| B_PREDICTION_MODE *best_mode, |
| const int *mode_costs, |
| |
| int *bestrate, |
| int *bestdistortion) |
| { |
| |
| BLOCKD *b = &x->e_mbd.block[ib]; |
| BLOCK *be = &x->block[ib]; |
| int dst_stride = x->e_mbd.dst.y_stride; |
| unsigned char *dst = x->e_mbd.dst.y_buffer + b->offset; |
| B_PREDICTION_MODE mode; |
| int best_rd = INT_MAX; |
| int rate; |
| int distortion; |
| |
| unsigned char *Above = dst - dst_stride; |
| unsigned char *yleft = dst - 1; |
| unsigned char top_left = Above[-1]; |
| |
| for (mode = B_DC_PRED; mode <= B_HE_PRED; mode++) |
| { |
| int this_rd; |
| |
| rate = mode_costs[mode]; |
| |
| vp8_intra4x4_predict(Above, yleft, dst_stride, mode, |
| b->predictor, 16, top_left); |
| distortion = get_prediction_error(be, b); |
| this_rd = RDCOST(x->rdmult, x->rddiv, rate, distortion); |
| |
| if (this_rd < best_rd) |
| { |
| *bestrate = rate; |
| *bestdistortion = distortion; |
| best_rd = this_rd; |
| *best_mode = mode; |
| } |
| } |
| |
| b->bmi.as_mode = *best_mode; |
| vp8_encode_intra4x4block(x, ib); |
| return best_rd; |
| } |
| |
| |
| static int pick_intra4x4mby_modes |
| ( |
| MACROBLOCK *mb, |
| int *Rate, |
| int *best_dist |
| ) |
| { |
| MACROBLOCKD *const xd = &mb->e_mbd; |
| int i; |
| int cost = mb->mbmode_cost [xd->frame_type] [B_PRED]; |
| int error; |
| int distortion = 0; |
| const int *bmode_costs; |
| |
| intra_prediction_down_copy(xd, xd->dst.y_buffer - xd->dst.y_stride + 16); |
| |
| bmode_costs = mb->inter_bmode_costs; |
| |
| for (i = 0; i < 16; i++) |
| { |
| MODE_INFO *const mic = xd->mode_info_context; |
| const int mis = xd->mode_info_stride; |
| |
| B_PREDICTION_MODE UNINITIALIZED_IS_SAFE(best_mode); |
| int UNINITIALIZED_IS_SAFE(r), UNINITIALIZED_IS_SAFE(d); |
| |
| if (mb->e_mbd.frame_type == KEY_FRAME) |
| { |
| const B_PREDICTION_MODE A = above_block_mode(mic, i, mis); |
| const B_PREDICTION_MODE L = left_block_mode(mic, i); |
| |
| bmode_costs = mb->bmode_costs[A][L]; |
| } |
| |
| |
| pick_intra4x4block(mb, i, &best_mode, bmode_costs, &r, &d); |
| |
| cost += r; |
| distortion += d; |
| mic->bmi[i].as_mode = best_mode; |
| |
| /* Break out case where we have already exceeded best so far value |
| * that was passed in |
| */ |
| if (distortion > *best_dist) |
| break; |
| } |
| |
| *Rate = cost; |
| |
| if (i == 16) |
| { |
| *best_dist = distortion; |
| error = RDCOST(mb->rdmult, mb->rddiv, cost, distortion); |
| } |
| else |
| { |
| *best_dist = INT_MAX; |
| error = INT_MAX; |
| } |
| |
| return error; |
| } |
| |
| static void pick_intra_mbuv_mode(MACROBLOCK *mb) |
| { |
| |
| MACROBLOCKD *x = &mb->e_mbd; |
| unsigned char *uabove_row = x->dst.u_buffer - x->dst.uv_stride; |
| unsigned char *vabove_row = x->dst.v_buffer - x->dst.uv_stride; |
| unsigned char *usrc_ptr = (mb->block[16].src + *mb->block[16].base_src); |
| unsigned char *vsrc_ptr = (mb->block[20].src + *mb->block[20].base_src); |
| int uvsrc_stride = mb->block[16].src_stride; |
| unsigned char uleft_col[8]; |
| unsigned char vleft_col[8]; |
| unsigned char utop_left = uabove_row[-1]; |
| unsigned char vtop_left = vabove_row[-1]; |
| int i, j; |
| int expected_udc; |
| int expected_vdc; |
| int shift; |
| int Uaverage = 0; |
| int Vaverage = 0; |
| int diff; |
| int pred_error[4] = {0, 0, 0, 0}, best_error = INT_MAX; |
| MB_PREDICTION_MODE UNINITIALIZED_IS_SAFE(best_mode); |
| |
| |
| for (i = 0; i < 8; i++) |
| { |
| uleft_col[i] = x->dst.u_buffer [i* x->dst.uv_stride -1]; |
| vleft_col[i] = x->dst.v_buffer [i* x->dst.uv_stride -1]; |
| } |
| |
| if (!x->up_available && !x->left_available) |
| { |
| expected_udc = 128; |
| expected_vdc = 128; |
| } |
| else |
| { |
| shift = 2; |
| |
| if (x->up_available) |
| { |
| |
| for (i = 0; i < 8; i++) |
| { |
| Uaverage += uabove_row[i]; |
| Vaverage += vabove_row[i]; |
| } |
| |
| shift ++; |
| |
| } |
| |
| if (x->left_available) |
| { |
| for (i = 0; i < 8; i++) |
| { |
| Uaverage += uleft_col[i]; |
| Vaverage += vleft_col[i]; |
| } |
| |
| shift ++; |
| |
| } |
| |
| expected_udc = (Uaverage + (1 << (shift - 1))) >> shift; |
| expected_vdc = (Vaverage + (1 << (shift - 1))) >> shift; |
| } |
| |
| |
| for (i = 0; i < 8; i++) |
| { |
| for (j = 0; j < 8; j++) |
| { |
| |
| int predu = uleft_col[i] + uabove_row[j] - utop_left; |
| int predv = vleft_col[i] + vabove_row[j] - vtop_left; |
| int u_p, v_p; |
| |
| u_p = usrc_ptr[j]; |
| v_p = vsrc_ptr[j]; |
| |
| if (predu < 0) |
| predu = 0; |
| |
| if (predu > 255) |
| predu = 255; |
| |
| if (predv < 0) |
| predv = 0; |
| |
| if (predv > 255) |
| predv = 255; |
| |
| |
| diff = u_p - expected_udc; |
| pred_error[DC_PRED] += diff * diff; |
| diff = v_p - expected_vdc; |
| pred_error[DC_PRED] += diff * diff; |
| |
| |
| diff = u_p - uabove_row[j]; |
| pred_error[V_PRED] += diff * diff; |
| diff = v_p - vabove_row[j]; |
| pred_error[V_PRED] += diff * diff; |
| |
| |
| diff = u_p - uleft_col[i]; |
| pred_error[H_PRED] += diff * diff; |
| diff = v_p - vleft_col[i]; |
| pred_error[H_PRED] += diff * diff; |
| |
| |
| diff = u_p - predu; |
| pred_error[TM_PRED] += diff * diff; |
| diff = v_p - predv; |
| pred_error[TM_PRED] += diff * diff; |
| |
| |
| } |
| |
| usrc_ptr += uvsrc_stride; |
| vsrc_ptr += uvsrc_stride; |
| |
| if (i == 3) |
| { |
| usrc_ptr = (mb->block[18].src + *mb->block[18].base_src); |
| vsrc_ptr = (mb->block[22].src + *mb->block[22].base_src); |
| } |
| |
| |
| |
| } |
| |
| |
| for (i = DC_PRED; i <= TM_PRED; i++) |
| { |
| if (best_error > pred_error[i]) |
| { |
| best_error = pred_error[i]; |
| best_mode = (MB_PREDICTION_MODE)i; |
| } |
| } |
| |
| |
| mb->e_mbd.mode_info_context->mbmi.uv_mode = best_mode; |
| |
| } |
| |
| static void update_mvcount(MACROBLOCK *x, int_mv *best_ref_mv) |
| { |
| MACROBLOCKD *xd = &x->e_mbd; |
| /* Split MV modes currently not supported when RD is nopt enabled, |
| * therefore, only need to modify MVcount in NEWMV mode. */ |
| if (xd->mode_info_context->mbmi.mode == NEWMV) |
| { |
| x->MVcount[0][mv_max+((xd->mode_info_context->mbmi.mv.as_mv.row - |
| best_ref_mv->as_mv.row) >> 1)]++; |
| x->MVcount[1][mv_max+((xd->mode_info_context->mbmi.mv.as_mv.col - |
| best_ref_mv->as_mv.col) >> 1)]++; |
| } |
| } |
| |
| |
| #if CONFIG_MULTI_RES_ENCODING |
| static |
| void get_lower_res_motion_info(VP8_COMP *cpi, MACROBLOCKD *xd, int *dissim, |
| int *parent_ref_frame, |
| MB_PREDICTION_MODE *parent_mode, |
| int_mv *parent_ref_mv, int mb_row, int mb_col) |
| { |
| LOWER_RES_MB_INFO* store_mode_info |
| = ((LOWER_RES_FRAME_INFO*)cpi->oxcf.mr_low_res_mode_info)->mb_info; |
| unsigned int parent_mb_index; |
| |
| /* Consider different down_sampling_factor. */ |
| { |
| /* TODO: Removed the loop that supports special down_sampling_factor |
| * such as 2, 4, 8. Will revisit it if needed. |
| * Should also try using a look-up table to see if it helps |
| * performance. */ |
| int parent_mb_row, parent_mb_col; |
| |
| parent_mb_row = mb_row*cpi->oxcf.mr_down_sampling_factor.den |
| /cpi->oxcf.mr_down_sampling_factor.num; |
| parent_mb_col = mb_col*cpi->oxcf.mr_down_sampling_factor.den |
| /cpi->oxcf.mr_down_sampling_factor.num; |
| parent_mb_index = parent_mb_row*cpi->mr_low_res_mb_cols + parent_mb_col; |
| } |
| |
| /* Read lower-resolution mode & motion result from memory.*/ |
| *parent_ref_frame = store_mode_info[parent_mb_index].ref_frame; |
| *parent_mode = store_mode_info[parent_mb_index].mode; |
| *dissim = store_mode_info[parent_mb_index].dissim; |
| |
| /* For highest-resolution encoder, adjust dissim value. Lower its quality |
| * for good performance. */ |
| if (cpi->oxcf.mr_encoder_id == (cpi->oxcf.mr_total_resolutions - 1)) |
| *dissim>>=1; |
| |
| if(*parent_ref_frame != INTRA_FRAME) |
| { |
| /* Consider different down_sampling_factor. |
| * The result can be rounded to be more precise, but it takes more time. |
| */ |
| (*parent_ref_mv).as_mv.row = store_mode_info[parent_mb_index].mv.as_mv.row |
| *cpi->oxcf.mr_down_sampling_factor.num |
| /cpi->oxcf.mr_down_sampling_factor.den; |
| (*parent_ref_mv).as_mv.col = store_mode_info[parent_mb_index].mv.as_mv.col |
| *cpi->oxcf.mr_down_sampling_factor.num |
| /cpi->oxcf.mr_down_sampling_factor.den; |
| |
| vp8_clamp_mv2(parent_ref_mv, xd); |
| } |
| } |
| #endif |
| |
| static void check_for_encode_breakout(unsigned int sse, MACROBLOCK* x) |
| { |
| MACROBLOCKD *xd = &x->e_mbd; |
| |
| unsigned int threshold = (xd->block[0].dequant[1] |
| * xd->block[0].dequant[1] >>4); |
| |
| if(threshold < x->encode_breakout) |
| threshold = x->encode_breakout; |
| |
| if (sse < threshold ) |
| { |
| /* Check u and v to make sure skip is ok */ |
| unsigned int sse2 = 0; |
| |
| sse2 = VP8_UVSSE(x); |
| |
| if (sse2 * 2 < x->encode_breakout) |
| x->skip = 1; |
| else |
| x->skip = 0; |
| } |
| } |
| |
| static int evaluate_inter_mode(unsigned int* sse, int rate2, int* distortion2, |
| VP8_COMP *cpi, MACROBLOCK *x, int rd_adj) |
| { |
| MB_PREDICTION_MODE this_mode = x->e_mbd.mode_info_context->mbmi.mode; |
| int_mv mv = x->e_mbd.mode_info_context->mbmi.mv; |
| int this_rd; |
| int denoise_aggressive = 0; |
| /* Exit early and don't compute the distortion if this macroblock |
| * is marked inactive. */ |
| if (cpi->active_map_enabled && x->active_ptr[0] == 0) |
| { |
| *sse = 0; |
| *distortion2 = 0; |
| x->skip = 1; |
| return INT_MAX; |
| } |
| |
| if((this_mode != NEWMV) || |
| !(cpi->sf.half_pixel_search) || cpi->common.full_pixel==1) |
| *distortion2 = vp8_get_inter_mbpred_error(x, |
| &cpi->fn_ptr[BLOCK_16X16], |
| sse, mv); |
| |
| this_rd = RDCOST(x->rdmult, x->rddiv, rate2, *distortion2); |
| |
| #if CONFIG_TEMPORAL_DENOISING |
| if (cpi->oxcf.noise_sensitivity > 0) { |
| denoise_aggressive = |
| (cpi->denoiser.denoiser_mode == kDenoiserOnYUVAggressive) ? 1 : 0; |
| } |
| #endif |
| |
| // Adjust rd for ZEROMV and LAST, if LAST is the closest reference frame. |
| // TODO: We should also add condition on distance of closest to current. |
| if(!cpi->oxcf.screen_content_mode && |
| this_mode == ZEROMV && |
| x->e_mbd.mode_info_context->mbmi.ref_frame == LAST_FRAME && |
| (denoise_aggressive || (cpi->closest_reference_frame == LAST_FRAME))) |
| { |
| // No adjustment if block is considered to be skin area. |
| if(x->is_skin) |
| rd_adj = 100; |
| |
| this_rd = ((int64_t)this_rd) * rd_adj / 100; |
| } |
| |
| check_for_encode_breakout(*sse, x); |
| return this_rd; |
| } |
| |
| static void calculate_zeromv_rd_adjustment(VP8_COMP *cpi, MACROBLOCK *x, |
| int *rd_adjustment) |
| { |
| MODE_INFO *mic = x->e_mbd.mode_info_context; |
| int_mv mv_l, mv_a, mv_al; |
| int local_motion_check = 0; |
| |
| if (cpi->lf_zeromv_pct > 40) |
| { |
| /* left mb */ |
| mic -= 1; |
| mv_l = mic->mbmi.mv; |
| |
| if (mic->mbmi.ref_frame != INTRA_FRAME) |
| if( abs(mv_l.as_mv.row) < 8 && abs(mv_l.as_mv.col) < 8) |
| local_motion_check++; |
| |
| /* above-left mb */ |
| mic -= x->e_mbd.mode_info_stride; |
| mv_al = mic->mbmi.mv; |
| |
| if (mic->mbmi.ref_frame != INTRA_FRAME) |
| if( abs(mv_al.as_mv.row) < 8 && abs(mv_al.as_mv.col) < 8) |
| local_motion_check++; |
| |
| /* above mb */ |
| mic += 1; |
| mv_a = mic->mbmi.mv; |
| |
| if (mic->mbmi.ref_frame != INTRA_FRAME) |
| if( abs(mv_a.as_mv.row) < 8 && abs(mv_a.as_mv.col) < 8) |
| local_motion_check++; |
| |
| if (((!x->e_mbd.mb_to_top_edge || !x->e_mbd.mb_to_left_edge) |
| && local_motion_check >0) || local_motion_check >2 ) |
| *rd_adjustment = 80; |
| else if (local_motion_check > 0) |
| *rd_adjustment = 90; |
| } |
| } |
| |
| void vp8_pick_inter_mode(VP8_COMP *cpi, MACROBLOCK *x, int recon_yoffset, |
| int recon_uvoffset, int *returnrate, |
| int *returndistortion, int *returnintra, int mb_row, |
| int mb_col) |
| { |
| BLOCK *b = &x->block[0]; |
| BLOCKD *d = &x->e_mbd.block[0]; |
| MACROBLOCKD *xd = &x->e_mbd; |
| MB_MODE_INFO best_mbmode; |
| |
| int_mv best_ref_mv_sb[2]; |
| int_mv mode_mv_sb[2][MB_MODE_COUNT]; |
| int_mv best_ref_mv; |
| int_mv *mode_mv; |
| MB_PREDICTION_MODE this_mode; |
| int num00; |
| int mdcounts[4]; |
| int best_rd = INT_MAX; |
| int rd_adjustment = 100; |
| int best_intra_rd = INT_MAX; |
| int mode_index; |
| int rate; |
| int rate2; |
| int distortion2; |
| int bestsme = INT_MAX; |
| int best_mode_index = 0; |
| unsigned int sse = UINT_MAX, best_rd_sse = UINT_MAX; |
| #if CONFIG_TEMPORAL_DENOISING |
| unsigned int zero_mv_sse = UINT_MAX, best_sse = UINT_MAX; |
| #endif |
| |
| int sf_improved_mv_pred = cpi->sf.improved_mv_pred; |
| |
| #if CONFIG_MULTI_RES_ENCODING |
| int dissim = INT_MAX; |
| int parent_ref_frame = 0; |
| int_mv parent_ref_mv; |
| MB_PREDICTION_MODE parent_mode = 0; |
| int parent_ref_valid = 0; |
| #endif |
| |
| int_mv mvp; |
| |
| int near_sadidx[8] = {0, 1, 2, 3, 4, 5, 6, 7}; |
| int saddone=0; |
| /* search range got from mv_pred(). It uses step_param levels. (0-7) */ |
| int sr=0; |
| |
| unsigned char *plane[4][3]; |
| int ref_frame_map[4]; |
| int sign_bias = 0; |
| int dot_artifact_candidate = 0; |
| get_predictor_pointers(cpi, plane, recon_yoffset, recon_uvoffset); |
| |
| // If the current frame is using LAST as a reference, check for |
| // biasing the mode selection for dot artifacts. |
| if (cpi->ref_frame_flags & VP8_LAST_FRAME) { |
| unsigned char* target_y = x->src.y_buffer; |
| unsigned char* target_u = x->block[16].src + *x->block[16].base_src; |
| unsigned char* target_v = x->block[20].src + *x->block[20].base_src; |
| int stride = x->src.y_stride; |
| int stride_uv = x->block[16].src_stride; |
| #if CONFIG_TEMPORAL_DENOISING |
| if (cpi->oxcf.noise_sensitivity) { |
| const int uv_denoise = (cpi->oxcf.noise_sensitivity >= 2) ? 1 : 0; |
| target_y = |
| cpi->denoiser.yv12_running_avg[LAST_FRAME].y_buffer + recon_yoffset; |
| stride = cpi->denoiser.yv12_running_avg[LAST_FRAME].y_stride; |
| if (uv_denoise) { |
| target_u = |
| cpi->denoiser.yv12_running_avg[LAST_FRAME].u_buffer + |
| recon_uvoffset; |
| target_v = |
| cpi->denoiser.yv12_running_avg[LAST_FRAME].v_buffer + |
| recon_uvoffset; |
| stride_uv = cpi->denoiser.yv12_running_avg[LAST_FRAME].uv_stride; |
| } |
| } |
| #endif |
| dot_artifact_candidate = |
| check_dot_artifact_candidate(cpi, x, target_y, stride, |
| plane[LAST_FRAME][0], mb_row, mb_col, 0); |
| // If not found in Y channel, check UV channel. |
| if (!dot_artifact_candidate) { |
| dot_artifact_candidate = |
| check_dot_artifact_candidate(cpi, x, target_u, stride_uv, |
| plane[LAST_FRAME][1], mb_row, mb_col, 1); |
| if (!dot_artifact_candidate) { |
| dot_artifact_candidate = |
| check_dot_artifact_candidate(cpi, x, target_v, stride_uv, |
| plane[LAST_FRAME][2], mb_row, mb_col, 2); |
| } |
| } |
| } |
| |
| #if CONFIG_MULTI_RES_ENCODING |
| // |parent_ref_valid| will be set here if potentially we can do mv resue for |
| // this higher resol (|cpi->oxcf.mr_encoder_id| > 0) frame. |
| // |parent_ref_valid| may be reset depending on |parent_ref_frame| for |
| // the current macroblock below. |
| parent_ref_valid = cpi->oxcf.mr_encoder_id && cpi->mr_low_res_mv_avail; |
| if (parent_ref_valid) |
| { |
| int parent_ref_flag; |
| |
| get_lower_res_motion_info(cpi, xd, &dissim, &parent_ref_frame, |
| &parent_mode, &parent_ref_mv, mb_row, mb_col); |
| |
| /* TODO(jkoleszar): The references available (ref_frame_flags) to the |
| * lower res encoder should match those available to this encoder, but |
| * there seems to be a situation where this mismatch can happen in the |
| * case of frame dropping and temporal layers. For example, |
| * GOLD being disallowed in ref_frame_flags, but being returned as |
| * parent_ref_frame. |
| * |
| * In this event, take the conservative approach of disabling the |
| * lower res info for this MB. |
| */ |
| |
| parent_ref_flag = 0; |
| // Note availability for mv reuse is only based on last and golden. |
| if (parent_ref_frame == LAST_FRAME) |
| parent_ref_flag = (cpi->ref_frame_flags & VP8_LAST_FRAME); |
| else if (parent_ref_frame == GOLDEN_FRAME) |
| parent_ref_flag = (cpi->ref_frame_flags & VP8_GOLD_FRAME); |
| |
| //assert(!parent_ref_frame || parent_ref_flag); |
| |
| // If |parent_ref_frame| did not match either last or golden then |
| // shut off mv reuse. |
| if (parent_ref_frame && !parent_ref_flag) |
| parent_ref_valid = 0; |
| |
| // Don't do mv reuse since we want to allow for another mode besides |
| // ZEROMV_LAST to remove dot artifact. |
| if (dot_artifact_candidate) |
| parent_ref_valid = 0; |
| } |
| #endif |
| |
| // Check if current macroblock is in skin area. |
| { |
| const int y = x->src.y_buffer[7 * x->src.y_stride + 7]; |
| const int cb = x->src.u_buffer[3 * x->src.uv_stride + 3]; |
| const int cr = x->src.v_buffer[3 * x->src.uv_stride + 3]; |
| x->is_skin = 0; |
| if (!cpi->oxcf.screen_content_mode) |
| x->is_skin = is_skin_color(y, cb, cr); |
| } |
| #if CONFIG_TEMPORAL_DENOISING |
| if (cpi->oxcf.noise_sensitivity) { |
| // Under aggressive denoising mode, should we use skin map to reduce denoiser |
| // and ZEROMV bias? Will need to revisit the accuracy of this detection for |
| // very noisy input. For now keep this as is (i.e., don't turn it off). |
| // if (cpi->denoiser.denoiser_mode == kDenoiserOnYUVAggressive) |
| // x->is_skin = 0; |
| } |
| #endif |
| |
| mode_mv = mode_mv_sb[sign_bias]; |
| best_ref_mv.as_int = 0; |
| memset(mode_mv_sb, 0, sizeof(mode_mv_sb)); |
| memset(&best_mbmode, 0, sizeof(best_mbmode)); |
| |
| /* Setup search priorities */ |
| #if CONFIG_MULTI_RES_ENCODING |
| if (parent_ref_valid && parent_ref_frame && dissim < 8) |
| { |
| ref_frame_map[0] = -1; |
| ref_frame_map[1] = parent_ref_frame; |
| ref_frame_map[2] = -1; |
| ref_frame_map[3] = -1; |
| } else |
| #endif |
| get_reference_search_order(cpi, ref_frame_map); |
| |
| /* Check to see if there is at least 1 valid reference frame that we need |
| * to calculate near_mvs. |
| */ |
| if (ref_frame_map[1] > 0) |
| { |
| sign_bias = vp8_find_near_mvs_bias(&x->e_mbd, |
| x->e_mbd.mode_info_context, |
| mode_mv_sb, |
| best_ref_mv_sb, |
| mdcounts, |
| ref_frame_map[1], |
| cpi->common.ref_frame_sign_bias); |
| |
| mode_mv = mode_mv_sb[sign_bias]; |
| best_ref_mv.as_int = best_ref_mv_sb[sign_bias].as_int; |
| } |
| |
| /* Count of the number of MBs tested so far this frame */ |
| x->mbs_tested_so_far++; |
| |
| *returnintra = INT_MAX; |
| x->skip = 0; |
| |
| x->e_mbd.mode_info_context->mbmi.ref_frame = INTRA_FRAME; |
| |
| /* If the frame has big static background and current MB is in low |
| * motion area, its mode decision is biased to ZEROMV mode. |
| * No adjustment if cpu_used is <= -12 (i.e., cpi->Speed >= 12). |
| * At such speed settings, ZEROMV is already heavily favored. |
| */ |
| if (cpi->Speed < 12) { |
| calculate_zeromv_rd_adjustment(cpi, x, &rd_adjustment); |
| } |
| |
| #if CONFIG_TEMPORAL_DENOISING |
| if (cpi->oxcf.noise_sensitivity) { |
| rd_adjustment = (int)(rd_adjustment * |
| cpi->denoiser.denoise_pars.pickmode_mv_bias / 100); |
| } |
| #endif |
| |
| if (dot_artifact_candidate) |
| { |
| // Bias against ZEROMV_LAST mode. |
| rd_adjustment = 150; |
| } |
| |
| |
| /* if we encode a new mv this is important |
| * find the best new motion vector |
| */ |
| for (mode_index = 0; mode_index < MAX_MODES; mode_index++) |
| { |
| int frame_cost; |
| int this_rd = INT_MAX; |
| int this_ref_frame = ref_frame_map[vp8_ref_frame_order[mode_index]]; |
| |
| if (best_rd <= x->rd_threshes[mode_index]) |
| continue; |
| |
| if (this_ref_frame < 0) |
| continue; |
| |
| x->e_mbd.mode_info_context->mbmi.ref_frame = this_ref_frame; |
| |
| /* everything but intra */ |
| if (x->e_mbd.mode_info_context->mbmi.ref_frame) |
| { |
| x->e_mbd.pre.y_buffer = plane[this_ref_frame][0]; |
| x->e_mbd.pre.u_buffer = plane[this_ref_frame][1]; |
| x->e_mbd.pre.v_buffer = plane[this_ref_frame][2]; |
| |
| if (sign_bias != cpi->common.ref_frame_sign_bias[this_ref_frame]) |
| { |
| sign_bias = cpi->common.ref_frame_sign_bias[this_ref_frame]; |
| mode_mv = mode_mv_sb[sign_bias]; |
| best_ref_mv.as_int = best_ref_mv_sb[sign_bias].as_int; |
| } |
| |
| #if CONFIG_MULTI_RES_ENCODING |
| if (parent_ref_valid) |
| { |
| if (vp8_mode_order[mode_index] == NEARESTMV && |
| mode_mv[NEARESTMV].as_int ==0) |
| continue; |
| if (vp8_mode_order[mode_index] == NEARMV && |
| mode_mv[NEARMV].as_int ==0) |
| continue; |
| |
| if (vp8_mode_order[mode_index] == NEWMV && parent_mode == ZEROMV |
| && best_ref_mv.as_int==0) |
| continue; |
| else if(vp8_mode_order[mode_index] == NEWMV && dissim==0 |
| && best_ref_mv.as_int==parent_ref_mv.as_int) |
| continue; |
| } |
| #endif |
| } |
| |
| /* Check to see if the testing frequency for this mode is at its max |
| * If so then prevent it from being tested and increase the threshold |
| * for its testing */ |
| if (x->mode_test_hit_counts[mode_index] && |
| (cpi->mode_check_freq[mode_index] > 1)) |
| { |
| if (x->mbs_tested_so_far <= (cpi->mode_check_freq[mode_index] * |
| x->mode_test_hit_counts[mode_index])) |
| { |
| /* Increase the threshold for coding this mode to make it less |
| * likely to be chosen */ |
| x->rd_thresh_mult[mode_index] += 4; |
| |
| if (x->rd_thresh_mult[mode_index] > MAX_THRESHMULT) |
| x->rd_thresh_mult[mode_index] = MAX_THRESHMULT; |
| |
| x->rd_threshes[mode_index] = |
| (cpi->rd_baseline_thresh[mode_index] >> 7) * |
| x->rd_thresh_mult[mode_index]; |
| continue; |
| } |
| } |
| |
| /* We have now reached the point where we are going to test the current |
| * mode so increment the counter for the number of times it has been |
| * tested */ |
| x->mode_test_hit_counts[mode_index] ++; |
| |
| rate2 = 0; |
| distortion2 = 0; |
| |
| this_mode = vp8_mode_order[mode_index]; |
| |
| x->e_mbd.mode_info_context->mbmi.mode = this_mode; |
| x->e_mbd.mode_info_context->mbmi.uv_mode = DC_PRED; |
| |
| /* Work out the cost assosciated with selecting the reference frame */ |
| frame_cost = |
| x->ref_frame_cost[x->e_mbd.mode_info_context->mbmi.ref_frame]; |
| rate2 += frame_cost; |
| |
| /* Only consider ZEROMV/ALTREF_FRAME for alt ref frame, |
| * unless ARNR filtering is enabled in which case we want |
| * an unfiltered alternative */ |
| if (cpi->is_src_frame_alt_ref && (cpi->oxcf.arnr_max_frames == 0)) |
| { |
| if (this_mode != ZEROMV || |
| x->e_mbd.mode_info_context->mbmi.ref_frame != ALTREF_FRAME) |
| continue; |
| } |
| |
| switch (this_mode) |
| { |
| case B_PRED: |
| /* Pass best so far to pick_intra4x4mby_modes to use as breakout */ |
| distortion2 = best_rd_sse; |
| pick_intra4x4mby_modes(x, &rate, &distortion2); |
| |
| if (distortion2 == INT_MAX) |
| { |
| this_rd = INT_MAX; |
| } |
| else |
| { |
| rate2 += rate; |
| distortion2 = vpx_variance16x16( |
| *(b->base_src), b->src_stride, |
| x->e_mbd.predictor, 16, &sse); |
| this_rd = RDCOST(x->rdmult, x->rddiv, rate2, distortion2); |
| |
| if (this_rd < best_intra_rd) |
| { |
| best_intra_rd = this_rd; |
| *returnintra = distortion2; |
| } |
| } |
| |
| break; |
| |
| case SPLITMV: |
| |
| /* Split MV modes currently not supported when RD is not enabled. */ |
| break; |
| |
| case DC_PRED: |
| case V_PRED: |
| case H_PRED: |
| case TM_PRED: |
| vp8_build_intra_predictors_mby_s(xd, |
| xd->dst.y_buffer - xd->dst.y_stride, |
| xd->dst.y_buffer - 1, |
| xd->dst.y_stride, |
| xd->predictor, |
| 16); |
| distortion2 = vpx_variance16x16 |
| (*(b->base_src), b->src_stride, |
| x->e_mbd.predictor, 16, &sse); |
| rate2 += x->mbmode_cost[x->e_mbd.frame_type][x->e_mbd.mode_info_context->mbmi.mode]; |
| this_rd = RDCOST(x->rdmult, x->rddiv, rate2, distortion2); |
| |
| if (this_rd < best_intra_rd) |
| { |
| best_intra_rd = this_rd; |
| *returnintra = distortion2; |
| } |
| break; |
| |
| case NEWMV: |
| { |
| int thissme; |
| int step_param; |
| int further_steps; |
| int n = 0; |
| int sadpb = x->sadperbit16; |
| int_mv mvp_full; |
| |
| int col_min = ((best_ref_mv.as_mv.col+7)>>3) - MAX_FULL_PEL_VAL; |
| int row_min = ((best_ref_mv.as_mv.row+7)>>3) - MAX_FULL_PEL_VAL; |
| int col_max = (best_ref_mv.as_mv.col>>3) |
| + MAX_FULL_PEL_VAL; |
| int row_max = (best_ref_mv.as_mv.row>>3) |
| + MAX_FULL_PEL_VAL; |
| |
| int tmp_col_min = x->mv_col_min; |
| int tmp_col_max = x->mv_col_max; |
| int tmp_row_min = x->mv_row_min; |
| int tmp_row_max = x->mv_row_max; |
| |
| int speed_adjust = (cpi->Speed > 5) ? ((cpi->Speed >= 8)? 3 : 2) : 1; |
| |
| /* Further step/diamond searches as necessary */ |
| step_param = cpi->sf.first_step + speed_adjust; |
| |
| #if CONFIG_MULTI_RES_ENCODING |
| /* If lower-res frame is not available for mv reuse (because of |
| frame dropping or different temporal layer pattern), then higher |
| resol encoder does motion search without any previous knowledge. |
| Also, since last frame motion info is not stored, then we can not |
| use improved_mv_pred. */ |
| if (cpi->oxcf.mr_encoder_id) |
| sf_improved_mv_pred = 0; |
| |
| // Only use parent MV as predictor if this candidate reference frame |
| // (|this_ref_frame|) is equal to |parent_ref_frame|. |
| if (parent_ref_valid && (parent_ref_frame == this_ref_frame)) |
| { |
| /* Use parent MV as predictor. Adjust search range |
| * accordingly. |
| */ |
| mvp.as_int = parent_ref_mv.as_int; |
| mvp_full.as_mv.col = parent_ref_mv.as_mv.col>>3; |
| mvp_full.as_mv.row = parent_ref_mv.as_mv.row>>3; |
| |
| if(dissim <=32) step_param += 3; |
| else if(dissim <=128) step_param += 2; |
| else step_param += 1; |
| }else |
| #endif |
| { |
| if(sf_improved_mv_pred) |
| { |
| if(!saddone) |
| { |
| vp8_cal_sad(cpi,xd,x, recon_yoffset ,&near_sadidx[0] ); |
| saddone = 1; |
| } |
| |
| vp8_mv_pred(cpi, &x->e_mbd, x->e_mbd.mode_info_context, |
| &mvp,x->e_mbd.mode_info_context->mbmi.ref_frame, |
| cpi->common.ref_frame_sign_bias, &sr, |
| &near_sadidx[0]); |
| |
| sr += speed_adjust; |
| /* adjust search range according to sr from mv prediction */ |
| if(sr > step_param) |
| step_param = sr; |
| |
| mvp_full.as_mv.col = mvp.as_mv.col>>3; |
| mvp_full.as_mv.row = mvp.as_mv.row>>3; |
| }else |
| { |
| mvp.as_int = best_ref_mv.as_int; |
| mvp_full.as_mv.col = best_ref_mv.as_mv.col>>3; |
| mvp_full.as_mv.row = best_ref_mv.as_mv.row>>3; |
| } |
| } |
| |
| #if CONFIG_MULTI_RES_ENCODING |
| if (parent_ref_valid && (parent_ref_frame == this_ref_frame) && |
| dissim <= 2 && |
| VPXMAX(abs(best_ref_mv.as_mv.row - parent_ref_mv.as_mv.row), |
| abs(best_ref_mv.as_mv.col - parent_ref_mv.as_mv.col)) <= |
| 4) |
| { |
| d->bmi.mv.as_int = mvp_full.as_int; |
| mode_mv[NEWMV].as_int = mvp_full.as_int; |
| |
| cpi->find_fractional_mv_step(x, b, d, &d->bmi.mv, &best_ref_mv, |
| x->errorperbit, |
| &cpi->fn_ptr[BLOCK_16X16], |
| cpi->mb.mvcost, |
| &distortion2,&sse); |
| }else |
| #endif |
| { |
| /* Get intersection of UMV window and valid MV window to |
| * reduce # of checks in diamond search. */ |
| if (x->mv_col_min < col_min ) |
| x->mv_col_min = col_min; |
| if (x->mv_col_max > col_max ) |
| x->mv_col_max = col_max; |
| if (x->mv_row_min < row_min ) |
| x->mv_row_min = row_min; |
| if (x->mv_row_max > row_max ) |
| x->mv_row_max = row_max; |
| |
| further_steps = (cpi->Speed >= 8)? |
| 0: (cpi->sf.max_step_search_steps - 1 - step_param); |
| |
| if (cpi->sf.search_method == HEX) |
| { |
| #if CONFIG_MULTI_RES_ENCODING |
| /* TODO: In higher-res pick_inter_mode, step_param is used to |
| * modify hex search range. Here, set step_param to 0 not to |
| * change the behavior in lowest-resolution encoder. |
| * Will improve it later. |
| */ |
| /* Set step_param to 0 to ensure large-range motion search |
| * when mv reuse if not valid (i.e. |parent_ref_valid| = 0), |
| * or if this candidate reference frame (|this_ref_frame|) is |
| * not equal to |parent_ref_frame|. |
| */ |
| if (!parent_ref_valid || (parent_ref_frame != this_ref_frame)) |
| step_param = 0; |
| #endif |
| bestsme = vp8_hex_search(x, b, d, &mvp_full, &d->bmi.mv, |
| step_param, sadpb, |
| &cpi->fn_ptr[BLOCK_16X16], |
| x->mvsadcost, x->mvcost, &best_ref_mv); |
| mode_mv[NEWMV].as_int = d->bmi.mv.as_int; |
| } |
| else |
| { |
| bestsme = cpi->diamond_search_sad(x, b, d, &mvp_full, |
| &d->bmi.mv, step_param, sadpb, &num00, |
| &cpi->fn_ptr[BLOCK_16X16], |
| x->mvcost, &best_ref_mv); |
| mode_mv[NEWMV].as_int = d->bmi.mv.as_int; |
| |
| /* Further step/diamond searches as necessary */ |
| n = num00; |
| num00 = 0; |
| |
| while (n < further_steps) |
| { |
| n++; |
| |
| if (num00) |
| num00--; |
| else |
| { |
| thissme = |
| cpi->diamond_search_sad(x, b, d, &mvp_full, |
| &d->bmi.mv, |
| step_param + n, |
| sadpb, &num00, |
| &cpi->fn_ptr[BLOCK_16X16], |
| x->mvcost, &best_ref_mv); |
| if (thissme < bestsme) |
| { |
| bestsme = thissme; |
| mode_mv[NEWMV].as_int = d->bmi.mv.as_int; |
| } |
| else |
| { |
| d->bmi.mv.as_int = mode_mv[NEWMV].as_int; |
| } |
| } |
| } |
| } |
| |
| x->mv_col_min = tmp_col_min; |
| x->mv_col_max = tmp_col_max; |
| x->mv_row_min = tmp_row_min; |
| x->mv_row_max = tmp_row_max; |
| |
| if (bestsme < INT_MAX) |
| cpi->find_fractional_mv_step(x, b, d, &d->bmi.mv, |
| &best_ref_mv, x->errorperbit, |
| &cpi->fn_ptr[BLOCK_16X16], |
| cpi->mb.mvcost, |
| &distortion2,&sse); |
| } |
| |
| mode_mv[NEWMV].as_int = d->bmi.mv.as_int; |
| // The clamp below is not necessary from the perspective |
| // of VP8 bitstream, but is added to improve ChromeCast |
| // mirroring's robustness. Please do not remove. |
| vp8_clamp_mv2(&mode_mv[this_mode], xd); |
| /* mv cost; */ |
| rate2 += vp8_mv_bit_cost(&mode_mv[NEWMV], &best_ref_mv, |
| cpi->mb.mvcost, 128); |
| } |
| |
| case NEARESTMV: |
| case NEARMV: |
| if (mode_mv[this_mode].as_int == 0) |
| continue; |
| |
| case ZEROMV: |
| |
| /* Trap vectors that reach beyond the UMV borders |
| * Note that ALL New MV, Nearest MV Near MV and Zero MV code drops |
| * through to this point because of the lack of break statements |
| * in the previous two cases. |
| */ |
| if (((mode_mv[this_mode].as_mv.row >> 3) < x->mv_row_min) || |
| ((mode_mv[this_mode].as_mv.row >> 3) > x->mv_row_max) || |
| ((mode_mv[this_mode].as_mv.col >> 3) < x->mv_col_min) || |
| ((mode_mv[this_mode].as_mv.col >> 3) > x->mv_col_max)) |
| continue; |
| |
| rate2 += vp8_cost_mv_ref(this_mode, mdcounts); |
| x->e_mbd.mode_info_context->mbmi.mv.as_int = |
| mode_mv[this_mode].as_int; |
| this_rd = evaluate_inter_mode(&sse, rate2, &distortion2, cpi, x, |
| rd_adjustment); |
| |
| break; |
| default: |
| break; |
| } |
| |
| #if CONFIG_TEMPORAL_DENOISING |
| if (cpi->oxcf.noise_sensitivity) |
| { |
| /* Store for later use by denoiser. */ |
| // Dont' denoise with GOLDEN OR ALTREF is they are old reference |
| // frames (greater than MAX_GF_ARF_DENOISE_RANGE frames in past). |
| int skip_old_reference = ((this_ref_frame != LAST_FRAME) && |
| (cpi->common.current_video_frame - |
| cpi->current_ref_frames[this_ref_frame] > |
| MAX_GF_ARF_DENOISE_RANGE)) ? 1 : 0; |
| if (this_mode == ZEROMV && sse < zero_mv_sse && |
| !skip_old_reference) |
| { |
| zero_mv_sse = sse; |
| x->best_zeromv_reference_frame = |
| x->e_mbd.mode_info_context->mbmi.ref_frame; |
| } |
| |
| // Store the best NEWMV in x for later use in the denoiser. |
| if (x->e_mbd.mode_info_context->mbmi.mode == NEWMV && |
| sse < best_sse && !skip_old_reference) |
| { |
| best_sse = sse; |
| x->best_sse_inter_mode = NEWMV; |
| x->best_sse_mv = x->e_mbd.mode_info_context->mbmi.mv; |
| x->need_to_clamp_best_mvs = |
| x->e_mbd.mode_info_context->mbmi.need_to_clamp_mvs; |
| x->best_reference_frame = |
| x->e_mbd.mode_info_context->mbmi.ref_frame; |
| } |
| } |
| #endif |
| |
| if (this_rd < best_rd || x->skip) |
| { |
| /* Note index of best mode */ |
| best_mode_index = mode_index; |
| |
| *returnrate = rate2; |
| *returndistortion = distortion2; |
| best_rd_sse = sse; |
| best_rd = this_rd; |
| memcpy(&best_mbmode, &x->e_mbd.mode_info_context->mbmi, |
| sizeof(MB_MODE_INFO)); |
| |
| /* Testing this mode gave rise to an improvement in best error |
| * score. Lower threshold a bit for next time |
| */ |
| x->rd_thresh_mult[mode_index] = |
| (x->rd_thresh_mult[mode_index] >= (MIN_THRESHMULT + 2)) ? |
| x->rd_thresh_mult[mode_index] - 2 : MIN_THRESHMULT; |
| x->rd_threshes[mode_index] = |
| (cpi->rd_baseline_thresh[mode_index] >> 7) * |
| x->rd_thresh_mult[mode_index]; |
| } |
| |
| /* If the mode did not help improve the best error case then raise the |
| * threshold for testing that mode next time around. |
| */ |
| else |
| { |
| x->rd_thresh_mult[mode_index] += 4; |
| |
| if (x->rd_thresh_mult[mode_index] > MAX_THRESHMULT) |
| x->rd_thresh_mult[mode_index] = MAX_THRESHMULT; |
| |
| x->rd_threshes[mode_index] = |
| (cpi->rd_baseline_thresh[mode_index] >> 7) * |
| x->rd_thresh_mult[mode_index]; |
| } |
| |
| if (x->skip) |
| break; |
| } |
| |
| /* Reduce the activation RD thresholds for the best choice mode */ |
| if ((cpi->rd_baseline_thresh[best_mode_index] > 0) && (cpi->rd_baseline_thresh[best_mode_index] < (INT_MAX >> 2))) |
| { |
| int best_adjustment = (x->rd_thresh_mult[best_mode_index] >> 3); |
| |
| x->rd_thresh_mult[best_mode_index] = |
| (x->rd_thresh_mult[best_mode_index] |
| >= (MIN_THRESHMULT + best_adjustment)) ? |
| x->rd_thresh_mult[best_mode_index] - best_adjustment : |
| MIN_THRESHMULT; |
| x->rd_threshes[best_mode_index] = |
| (cpi->rd_baseline_thresh[best_mode_index] >> 7) * |
| x->rd_thresh_mult[best_mode_index]; |
| } |
| |
| |
| { |
| int this_rdbin = (*returndistortion >> 7); |
| |
| if (this_rdbin >= 1024) |
| { |
| this_rdbin = 1023; |
| } |
| |
| x->error_bins[this_rdbin] ++; |
| } |
| |
| #if CONFIG_TEMPORAL_DENOISING |
| if (cpi->oxcf.noise_sensitivity) |
| { |
| int block_index = mb_row * cpi->common.mb_cols + mb_col; |
| int reevaluate = 0; |
| int is_noisy = 0; |
| if (x->best_sse_inter_mode == DC_PRED) |
| { |
| /* No best MV found. */ |
| x->best_sse_inter_mode = best_mbmode.mode; |
| x->best_sse_mv = best_mbmode.mv; |
| x->need_to_clamp_best_mvs = best_mbmode.need_to_clamp_mvs; |
| x->best_reference_frame = best_mbmode.ref_frame; |
| best_sse = best_rd_sse; |
| } |
| // For non-skin blocks that have selected ZEROMV for this current frame, |
| // and have been selecting ZEROMV_LAST (on the base layer frame) at |
| // least |x~20| consecutive past frames in a row, label the block for |
| // possible increase in denoising strength. We also condition this |
| // labeling on there being significant denoising in the scene |
| if (cpi->oxcf.noise_sensitivity == 4) { |
| if (cpi->denoiser.nmse_source_diff > |
| 70 * cpi->denoiser.threshold_aggressive_mode / 100) |
| is_noisy = 1; |
| } else { |
| if (cpi->mse_source_denoised > 1000) |
| is_noisy = 1; |
| } |
| x->increase_denoising = 0; |
| if (!x->is_skin && |
| x->best_sse_inter_mode == ZEROMV && |
| (x->best_reference_frame == LAST_FRAME || |
| x->best_reference_frame == cpi->closest_reference_frame) && |
| cpi->consec_zero_last[block_index] >= 20 && |
| is_noisy) { |
| x->increase_denoising = 1; |
| } |
| x->denoise_zeromv = 0; |
| vp8_denoiser_denoise_mb(&cpi->denoiser, x, best_sse, zero_mv_sse, |
| recon_yoffset, recon_uvoffset, |
| &cpi->common.lf_info, mb_row, mb_col, |
| block_index); |
| |
| // Reevaluate ZEROMV after denoising: for large noise content |
| // (i.e., cpi->mse_source_denoised is above threshold), do this for all |
| // blocks that did not pick ZEROMV as best mode but are using ZEROMV |
| // for denoising. Otherwise, always re-evaluate for blocks that picked |
| // INTRA mode as best mode. |
| // Avoid blocks that have been biased against ZERO_LAST |
| // (i.e., dot artifact candidate blocks). |
| reevaluate = (best_mbmode.ref_frame == INTRA_FRAME) || |
| (best_mbmode.mode != ZEROMV && |
| x->denoise_zeromv && |
| cpi->mse_source_denoised > 2000); |
| if (!dot_artifact_candidate && |
| reevaluate && |
| x->best_zeromv_reference_frame != INTRA_FRAME) |
| { |
| int this_rd = 0; |
| int this_ref_frame = x->best_zeromv_reference_frame; |
| rd_adjustment = 100; |
| rate2 = x->ref_frame_cost[this_ref_frame] + |
| vp8_cost_mv_ref(ZEROMV, mdcounts); |
| distortion2 = 0; |
| |
| /* set up the proper prediction buffers for the frame */ |
| x->e_mbd.mode_info_context->mbmi.ref_frame = this_ref_frame; |
| x->e_mbd.pre.y_buffer = plane[this_ref_frame][0]; |
| x->e_mbd.pre.u_buffer = plane[this_ref_frame][1]; |
| x->e_mbd.pre.v_buffer = plane[this_ref_frame][2]; |
| |
| x->e_mbd.mode_info_context->mbmi.mode = ZEROMV; |
| x->e_mbd.mode_info_context->mbmi.uv_mode = DC_PRED; |
| x->e_mbd.mode_info_context->mbmi.mv.as_int = 0; |
| this_rd = evaluate_inter_mode(&sse, rate2, &distortion2, cpi, x, |
| rd_adjustment); |
| |
| if (this_rd < best_rd) |
| { |
| memcpy(&best_mbmode, &x->e_mbd.mode_info_context->mbmi, |
| sizeof(MB_MODE_INFO)); |
| } |
| } |
| |
| } |
| #endif |
| |
| if (cpi->is_src_frame_alt_ref && |
| (best_mbmode.mode != ZEROMV || best_mbmode.ref_frame != ALTREF_FRAME)) |
| { |
| x->e_mbd.mode_info_context->mbmi.mode = ZEROMV; |
| x->e_mbd.mode_info_context->mbmi.ref_frame = ALTREF_FRAME; |
| x->e_mbd.mode_info_context->mbmi.mv.as_int = 0; |
| x->e_mbd.mode_info_context->mbmi.uv_mode = DC_PRED; |
| x->e_mbd.mode_info_context->mbmi.mb_skip_coeff = |
| (cpi->common.mb_no_coeff_skip); |
| x->e_mbd.mode_info_context->mbmi.partitioning = 0; |
| |
| return; |
| } |
| |
| /* set to the best mb mode, this copy can be skip if x->skip since it |
| * already has the right content */ |
| if (!x->skip) |
| memcpy(&x->e_mbd.mode_info_context->mbmi, &best_mbmode, |
| sizeof(MB_MODE_INFO)); |
| |
| if (best_mbmode.mode <= B_PRED) |
| { |
| /* set mode_info_context->mbmi.uv_mode */ |
| pick_intra_mbuv_mode(x); |
| } |
| |
| if (sign_bias |
| != cpi->common.ref_frame_sign_bias[xd->mode_info_context->mbmi.ref_frame]) |
| best_ref_mv.as_int = best_ref_mv_sb[!sign_bias].as_int; |
| |
| update_mvcount(x, &best_ref_mv); |
| } |
| |
| void vp8_pick_intra_mode(MACROBLOCK *x, int *rate_) |
| { |
| int error4x4, error16x16 = INT_MAX; |
| int rate, best_rate = 0, distortion, best_sse; |
| MB_PREDICTION_MODE mode, best_mode = DC_PRED; |
| int this_rd; |
| unsigned int sse; |
| BLOCK *b = &x->block[0]; |
| MACROBLOCKD *xd = &x->e_mbd; |
| |
| xd->mode_info_context->mbmi.ref_frame = INTRA_FRAME; |
| |
| pick_intra_mbuv_mode(x); |
| |
| for (mode = DC_PRED; mode <= TM_PRED; mode ++) |
| { |
| xd->mode_info_context->mbmi.mode = mode; |
| vp8_build_intra_predictors_mby_s(xd, |
| xd->dst.y_buffer - xd->dst.y_stride, |
| xd->dst.y_buffer - 1, |
| xd->dst.y_stride, |
| xd->predictor, |
| 16); |
| distortion = vpx_variance16x16 |
| (*(b->base_src), b->src_stride, xd->predictor, 16, &sse); |
| rate = x->mbmode_cost[xd->frame_type][mode]; |
| this_rd = RDCOST(x->rdmult, x->rddiv, rate, distortion); |
| |
| if (error16x16 > this_rd) |
| { |
| error16x16 = this_rd; |
| best_mode = mode; |
| best_sse = sse; |
| best_rate = rate; |
| } |
| } |
| xd->mode_info_context->mbmi.mode = best_mode; |
| |
| error4x4 = pick_intra4x4mby_modes(x, &rate, |
| &best_sse); |
| if (error4x4 < error16x16) |
| { |
| xd->mode_info_context->mbmi.mode = B_PRED; |
| best_rate = rate; |
| } |
| |
| *rate_ = best_rate; |
| } |
