Chrome Media Router


TODO: Update with integration with Remote Playback API

The media router is a component in Chrome responsible for matching clients that wish to render media or URLs (media sources) on devices and endpoints capable of rendering that content (media sinks). When a media source is linked with a media sink, a media route is created that allows two-way messaging between the source and the sink. The media route allows the application to negotiate a peer-to-peer media streaming session with the media sink via messaging (e.g., via WebRTC or Cast Streaming), aka “mirroring.” The media route can also be used to request the remote display to render a URL without an associated peer-to-peer media streaming session, aka “flinging”. The media route can be terminated at user or browser request, which denies access to the media sink from the application.

The Web Presentation API allows a Web application to request display of Web content on a secondary (wired, or wireless) screen. The content may be rendered locally and streamed to the display or rendered remotely. The Web application controls the content by two-way messaging.

Note that the non-Blink parts of the media router will be implemented only in desktop Chrome and ChromeOS. Presentation API functionality will be implemented in Chrome for Android using analogous platform components such as the Android Media Route Provider framework.

TODO: Add material on 1-UA mode, or add a separate document

Offscreen rendering, capture, and streaming of WebContents (required for full Presentation API support) will be covered in a separate design document.


The objectives of this project:

  • Allow use of media sinks from a multitude of clients, including: Web applications via the Presentation API; Chrome apps; the browser itself; and the Chrome OS system shell.

  • Support mirroring locally rendered content to external screens, including on-screen and off-screen tabs, Chrome apps windows, and the system desktop.

  • Support “flinging” HTML5 documents to remote devices capable of rendering them.

  • Support the Cast Chrome Sender SDK on desktop and Android without any user installed extensions.

  • Allow new types of media sinks to be added to Chrome by implementing additional Media Route Providers.

The following are non-goals but may be objectives for future work:

  • Multicast of local content to multiple sinks at once.

  • Support for third party media route providers in Javascript or run-time installation of media route providers.

  • Support for sinks that are not primarily intended to render media.


The media router consists of four distinct components:

  1. The Chrome Media Router is a browser service exposed in-process via C++ API and is exposed to other processes via a set of two Mojo interfaces: the Presentation interface and the Media Router API interface. Its job is to field requests from clients for media sink availability, media route construction/destruction, and media route control via messaging. It also controls the Media Router Dialog and delegates many functions to the Media Router component extension.

  2. TODO: update The Media Router extension is an external component extension responsible for direct interaction with media sinks. The component extension will initially support use of Cast and DIAL devices with more types of sinks to be added over time. The component extension interacts with the Chrome Media Router via the Media Router API Mojo service, and uses some chrome.* platform APIs, such as chrome.dial,, and chrome.mdns to implement network level interaction with Cast and DIAL devices.

  3. Users interact with the Chrome Media Router through the Media Router Dialog. This dialog allows users to choose the destination media sink for new media routes and view and stop active media routes. It may be pulled up by the user clicking the Cast icon in the browser toolbar, or at the request of a Web application via the Presentation API. It is implemented in Views.

  4. The PresentationService mojo interface acts as a bridge between the Chrome Media Router and the Blink implementations of the Presentation API (launch bug).


The following diagram illustrates the architecture of the components described above.

TODO: update diagram

Chrome Media Router

The Chrome Media Router is a browser-resident service that serves as a media-protocol-agnostic platform for parties interested in media routing. It provides its clients with a set of APIs for media routing related queries and operations, including:

  • Register for notifications when a sink is available that can render a media source. (Media sources are represented as URIs and can represent local media or remotely hosted content.)

  • Request routing of media for that source, which will show the user the media router dialog to select a compatible sink. If the user selects a sink, the media route is returned to the application to allow it to control media playback.

  • Accept media control actions from the Media Router Dialog for an active media route and forwarding them to the associated route provider.

  • Send and receive arbitrary (string) messages between the application the media sink.

  • Terminate media routes, and notify the client and media route provider when that happens.

The Chrome Media Router, itself, does not directly interact with media sinks. TODO: update Instead it delegates these requests and responses to a media route provider in the component extension. The Chrome Media Router will contain bookkeeping of established routes, pending route requests, and other related resources, so it does not have to request this information from the route provider each time.

The following pseudocode describes how a client of the Chrome Media Router (through its C++ API) would use it to initiate and control a media sharing session.

Media Router API Example

TODO: update or remove

MediaRouter* media_router = MediaRouterImpl::GetInstance();

// Find out what screens are capable of rendering, e.g.
MediaSource youtube_src = MediaSource::ForPresentationUrl("");

// MyMediaSinksObserver should override MediaSinksObserver::OnSinksReceived to
// handle updates to the list of screens compatible with youtube_src
MediaSinksObserver* my_observer = new MyMediaSinksObserver(youtube_src);

// Ask the user to pick a screen from the list passed to my_observer and
// capture the sink_id (code not shown)

// Request routing of media for that source.  |callback| is passed a
// MediaRouteResponse& that contains a MediaRoute result if successful.
media_router->StartRouteRequest(youtube_src, sink_id, callback);

// The MediaRoute can be used to post messages to the sink.
media_router->PostMessage(media_route.media_route_id, "some data", "optional_extra_data_json");

// The MediaRoute can be closed which signals the sinkto terminate any remote
// app or media streaming session.

The Media Router interacts with the component extension via a Mojo service, the Media Router API, that exposes functionality whose implementation is delegated to the extension.

Media Router API Mojo Interface

TODO: Update or replace with link

// Interface for sending messages from the MediaRouter (MR) to the Media
// Router Provider Manager (MRPM).

interface MediaRouterApiClient {
  // Signals the media route manager to route the media located
  // at |source_urn| to |sink_id|.
  RequestRoute(int64 request_id, string source, string sink_id);

  // Signals the media route manager to close the route specified by |route_id|.
  CloseRoute(string route_id);

  // Signals the media route manager to start querying for sinks
  // capable of displaying |source|.
  AddMediaSinksQuery(string source);

  // Signals the media route manager to stop querying for sinks
  // capable of displaying |source|.
  RemoveMediaSinksQuery(string source);

  // Sends |message| with optional |extra_info_json| via the media route
  // |media_route_id|.
  // |extra_info_json| is an empty string if no extra info is provided.
  PostMessage(string media_route_id, string message, string extra_info_json);

// Interface for sending messages from the MRPM to the MR.
interface MediaRouterApi {
  // Called when the provider manager is ready.
  OnProviderManagerReady(string extension_id);

  // Called when the Media Route Manager receives a new list of sinks.
  OnSinksReceived(string source,
                  array<MediaSink> sinks,
                  array<MediaRoute> routes);

   // Called after a MediaRoute is established.
  OnRouteResponseReceived(int64 request_id, MediaRoute route);

  // Called when route establishment fails.
  OnRouteResponseError(int64 request_id, string error_text);

Media Router Component Extension

TODO: update to discuss in-browser MRPs and Mirroring Service

The component extension manages discovery of and network interaction with individual media sinks. For the purposes of this discussion a sink is a LAN-connected device that speaks the Cast or DIAL protocol, but in theory it could be any other type of endpoint that supports media rendering and two-way messaging. The extension consists of three types of components:

  • Media Route Providers: Each provider is a Javascript bundle that knows how to find and communicate with a specific type of media sink. It communicates with the media sink using HTTP/XHR or via device-specific network protocols (e.g., Cast Channel and Cast Streaming).

  • Media Route Provider Manager: This is responsible for dispatching requests from the Chrome Media Router to individual providers. It also registers providers on startup.

  • Mirroring Service: If a media source is requested that represents the tab or desktop contents, this service acts on the behalf of the application to initiate the mirroring session. This is handled internally to the component extension and is not exposed to the rest of the browser, it appears to be just another media route.

The component extension is written in JavaScript and includes code for multiple media route providers. Initially Media Route Providers will be implemented for Cast and DIAL devices with others to follow. Over time media route providers that do not rely on proprietary protocols will be implemented in the Chromium repository.

As an external component, the extension is installed on the initial run of the browser. It is built around an event page so it registers itself with the Media Router, registers itself with discovery APIs to be notified of display availability, and then suspends. The component extension will only be active when there are applications with pending sink availability requests or media routes, or when there is active network traffic between the extension and a media sink.

There are several modules to the extension that are loaded on-demand. The main event page bundles are a few hundred kb. The extension is updated on the Chrome release cycle with a branch made a week or two after the Chrome branch point.

Tab/Desktop Mirroring

TODO: update with discussion of C++ MirroringService

Tab and desktop mirroring will request routing of a media source with URN like urn:google:tab:3 representing tab contents. When the component extension receives a request to route this source, the media route provider manager will query route providers to enumerate sinks that can render streamed tab contents. Once a sink is selected by the user, the mirroring service will create the appropriate MediaStream using the chrome.tabCapture extension API. The MediaStream will then be passed to a Cast Streaming or WebRTC session depending on the preferred protocol of the selected sink. When the media route is terminated, the associated streaming session and media capture are also terminated. A similar approach will be used for desktop mirroring but using chrome.desktopCapture instead.

Presentation API

TODO: Discuss 1-UA mode TODO: Update for Onion Soup

Media routing of Web content will primarily be done through the Presentation API. Some media sinks (e.g. Cast) can render a subset of Web content natively, or render an equivalent app experience (e.g., via DIAL). For generic Web documents, we plan on rendering it in an offscreen WebContents and then using the Tab Mirroring approach outlined above. The design of the offscreen rendering capability will be added later to this document.

The Presentation API implementation in Blink will live in content/ and will operate on the frame level. It will delegate the calls to the embedder's Media Router implementation (Android Media Router / Chrome Media Router for Android / Chrome, respectively) via a common PresentationServiceDelegate interface. A draft Mojo interface follows (not yet complete):

PresentationService mojo interface

TODO: Update or replace with link

interface PresentationService {
  // Returns the last screen availability state if it’s changed since the last
  // time the method was called. The client has to call this method again when
  // handling the result (provided via Mojo callback) to get the next update
  // about the availability status.
  // May start discovery of the presentation screens. The implementation might
  // stop discovery once there are no active calls to GetScreenAvailability.
  // |presentation_url| can be specified to help the implementation to filter
  // out incompatible screens.
  GetScreenAvailability(string? presentation_url) => (bool available);

  // Called when the frame no longer listens to the
  // |availablechange| event.

TODO: Update table with current flow, or remove this section

Here is how the presentation API will roughly map to Chrome Media Router API:

Presentation API

Chrome Media Router

Adding onavailablechange listener

RegisterObserver(), with result propagated back to the RenderFrame / Presentation API.


Opens Media Router Dialog (via MediaRouterDialogController) -> User action -> StartRouteRequest()







Adding onmessage listener

RegisterMessageObserver() (tentative)

Adding onstatechange listener

RegisterRouteStateChangeObserver() (tentative)

Media Router Dialog

End user control of media routing is done through the Media Router Dialog. The media router dialog is implemented in Views.

The Media Router Dialog is activated by clicking on the Cast icon, which is always available to the user. The Cast icon appears in the toolbar action menu when there is an active media route, or when the user chooses to pin the icon there permanently.

TODO: Update screenshot

Clicking on the Cast icon brings up a menu of available media sinks that are compatible with the current content. For Web documents not using the Presentation API, these will include sinks that can render tab or desktop capture. For Web documents, it will include media sinks compatible with the URL requested to be presented through the Presentation API.

TODO: Update screenshot

Offscreen Rendering

TODO: Add notes about off-screen rendering.


TODO: Update to discuss sandboxing of in-browser MRPs.

The entire project should be security reviewed from a holistic and architectural perspective. Specific security-related aspects:

  • The Chrome Media Router will be designed to have a minimal processing of the URIs and messages passed through it (perhaps only checking for syntactic validity).
  • The Media Router Dialog will allow the MRPs to inject custom content into it, so for example, the inline controls for a game can differ from those for a movie. This content will be rendered out-of-process in an to prevent any escalation of privileges from compromised content.
  • The individual platform APIs used by the component extension MRPs (chrome.dial, chrome.mdns,, chrome.cast.streaming) have been security reviewed previously.


Code location

chrome/browser/media/routerMain implementation, in-browser MRPs
chrome/common/media_routerMojo definitions, shared impl
chrome/browser/ui/media_router/Media Router icon, dialog
content/browser/presentation/Browser impl of Presentation API
third_party/blink/renderer/modules/presentation/Blink impl of Presentaton API


6-Feb-2015mfoltz@chromium.orgInitial publication
8-Jul-2019mfoltz@chromium.orgConverted to markdown, obsolete material removed.