blob: 09ba0d3d697b19306ac5589348b7262e7011e20a [file] [log] [blame]
// Copyright (c) 2012 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#include "chrome/common/chrome_switches.h"
#include "base/base_switches.h"
#include "base/command_line.h"
#include "build/build_config.h"
namespace switches {
// -----------------------------------------------------------------------------
// Can't find the switch you are looking for? Try looking in:
// ash/
// base/
// chromeos/
// etc.
// When commenting your switch, please use the same voice as surrounding
// comments. Imagine "This switch..." at the beginning of the phrase, and it'll
// all work out.
// -----------------------------------------------------------------------------
// Allows third-party content included on a page to prompt for a HTTP basic
// auth username/password pair.
const char kAllowCrossOriginAuthPrompt[] = "allow-cross-origin-auth-prompt";
// On ChromeOS, file:// access is disabled except for certain whitelisted
// directories. This switch re-enables file:// for testing.
const char kAllowFileAccess[] = "allow-file-access";
// Allow non-secure origins to use the screen capture API and the desktopCapture
// extension API.
const char kAllowHttpScreenCapture[] = "allow-http-screen-capture";
// Enables TLS/SSL errors on localhost to be ignored (no interstitial,
// no blocking of requests).
const char kAllowInsecureLocalhost[] = "allow-insecure-localhost";
#if defined(ENABLE_PLUGINS)
// Specifies comma-separated list of extension ids or hosts to grant
// access to CRX file system APIs.
const char kAllowNaClCrxFsAPI[] = "allow-nacl-crxfs-api";
// Specifies comma-separated list of extension ids or hosts to grant
// access to file handle APIs.
const char kAllowNaClFileHandleAPI[] = "allow-nacl-file-handle-api";
// Specifies comma-separated list of extension ids or hosts to grant
// access to TCP/UDP socket APIs.
const char kAllowNaClSocketAPI[] = "allow-nacl-socket-api";
const char kAllowUncheckedDangerousDownloads[] =
const char kDisallowUncheckedDangerousDownloads[] =
// Don't block outdated plugins.
const char kAllowOutdatedPlugins[] = "allow-outdated-plugins";
// By default, an https page cannot run JavaScript, CSS or plugins from http
// URLs. This provides an override to get the old insecure behavior.
const char kAllowRunningInsecureContent[] = "allow-running-insecure-content";
// Prevents Chrome from requiring authorization to run certain widely installed
// but less commonly used plugins.
const char kAlwaysAuthorizePlugins[] = "always-authorize-plugins";
// Specifies that the extension-app with the specified id should be launched
// according to its configuration.
const char kAppId[] = "app-id";
// Specifies that the associated value should be launched in "application"
// mode.
const char kApp[] = "app";
// The URL that the webstore APIs download extensions from.
// Note: the URL must contain one '%s' for the extension ID.
const char kAppsGalleryDownloadURL[] = "apps-gallery-download-url";
// The URL to use for the gallery link in the app launcher.
const char kAppsGalleryURL[] = "apps-gallery-url";
// The update url used by gallery/webstore extensions.
const char kAppsGalleryUpdateURL[] = "apps-gallery-update-url";
// Value of GAIA auth code for --force-app-mode.
const char kAppModeAuthCode[] = "app-mode-auth-code";
// Value of OAuth2 refresh token for --force-app-mode.
const char kAppModeOAuth2Token[] = "app-mode-oauth-token";
// Enables overriding the path for the default authentication extension.
const char kAuthExtensionPath[] = "auth-ext-path";
// Whitelist for Negotiate Auth servers
const char kAuthServerWhitelist[] = "auth-server-whitelist";
// This flag makes Chrome auto-open DevTools window for each tab. It is
// intended to be used by developers and automation to not require user
// interaction for opening DevTools.
const char kAutoOpenDevToolsForTabs[] =
// This flag makes Chrome auto-select the provided choice when an extension asks
// permission to start desktop capture. Should only be used for tests. For
// instance, --auto-select-desktop-capture-source="Entire screen" will
// automatically select to share the entire screen in English locales.
const char kAutoSelectDesktopCaptureSource[] =
// This flag causes the user engagement checks for showing app banners to be
// bypassed. It is intended to be used by developers who wish to test that their
// sites otherwise meet the criteria needed to show app banners.
const char kBypassAppBannerEngagementChecks[] =
// Certificate Transparency: Uses the provided log(s) for checking Signed
// Certificate Timestamps provided with certificates.
// The switch's value is:
// log_description:log_key:log_url,log_description:log_key:log_url,...
// where
// log_description is a textual description of the log.
// log_key is a Base64'd DER-encoded SubjectPublicKeyInfo of the log's
// public key.
// log_url is a URL for the log, excluding the schema (which is always
// assumed to be HTTPS as required by RFC6962).
// Multiple logs can be specified by repeating description:key pairs,
// separated by a comma.
const char kCertificateTransparencyLog[] =
// How often (in seconds) to check for updates. Should only be used for testing
// purposes.
const char kCheckForUpdateIntervalSec[] = "check-for-update-interval";
// Comma-separated list of SSL cipher suites to disable.
const char kCipherSuiteBlacklist[] = "cipher-suite-blacklist";
// Tells chrome to display the cloud print dialog and upload the specified file
// for printing.
const char kCloudPrintFile[] = "cloud-print-file";
// Specifies the mime type to be used when uploading data from the file
// referenced by cloud-print-file. Defaults to "application/pdf" if
// unspecified.
const char kCloudPrintFileType[] = "cloud-print-file-type";
// Used with kCloudPrintFile to specify a JSON print ticket for the resulting
// print job. Defaults to null if unspecified.
const char kCloudPrintPrintTicket[] = "cloud-print-print-ticket";
// Used with kCloudPrintFile to specify a title for the resulting print job.
const char kCloudPrintJobTitle[] = "cloud-print-job-title";
// Setup cloud print proxy for provided printers. This does not start
// service or register proxy for autostart.
const char kCloudPrintSetupProxy[] = "cloud-print-setup-proxy";
// Comma-separated list of BrowserThreads that cause browser process to crash
// if the given browser thread is not responsive. UI,IO,DB,FILE,CACHE are the
// list of BrowserThreads that are supported.
// For example:
// --crash-on-hang-threads=UI:3:18,IO:3:18 --> Crash the browser if UI or IO
// is not responsive for 18 seconds and the number of browser threads that
// are responding is less than or equal to 3.
const char kCrashOnHangThreads[] = "crash-on-hang-threads";
// Some platforms like ChromeOS default to empty desktop.
// Browser tests may need to add this switch so that at least one browser
// instance is created on startup.
// TODO(nkostylev): Investigate if this switch could be removed.
// (
const char kCreateBrowserOnStartupForTests[] =
// Enables a frame context menu item that toggles the frame in and out of glass
// mode (Windows Vista and up only).
const char kDebugEnableFrameToggle[] = "debug-enable-frame-toggle";
// Adds debugging entries such as Inspect Element to context menus of packed
// apps.
const char kDebugPackedApps[] = "debug-packed-apps";
// Triggers a plethora of diagnostic modes.
const char kDiagnostics[] = "diagnostics";
// Sets the output format for diagnostic modes enabled by diagnostics flag.
const char kDiagnosticsFormat[] = "diagnostics-format";
// Tells the diagnostics mode to do the requested recovery step(s).
const char kDiagnosticsRecovery[] = "diagnostics-recovery";
// When kEnableSettingsWindow is used, About is shown as an overlay in Settings
// instead of as a separate page, unless this flag is specified.
const char kDisableAboutInSettings[] = "disable-about-in-settings";
// Disables the display of a banner allowing the user to add a web
// app to their shelf (or platform-specific equivalent)
const char kDisableAddToShelf[] = "disable-add-to-shelf";
#if defined(OS_ANDROID)
const char kDisableAppLink[] = "disable-app-link";
// Disables the experimental asynchronous DNS client.
const char kDisableAsyncDns[] = "disable-async-dns";
// Disable several subsystems which run network requests in the background.
// This is for use when doing network performance testing to avoid noise in the
// measurements.
const char kDisableBackgroundNetworking[] = "disable-background-networking";
// Disables the bundled PPAPI version of Flash.
const char kDisableBundledPpapiFlash[] = "disable-bundled-ppapi-flash";
// Disable hardware encoding support for Cast Streaming.
const char kDisableCastStreamingHWEncoding[] =
// Disables detection of child accounts.
const char kDisableChildAccountDetection[] =
// Disables data volume counters in the Clear Browsing Data dialog.
const char kDisableClearBrowsingDataCounters[] =
// Disables the client-side phishing detection feature. Note that even if
// client-side phishing detection is enabled, it will only be active if the
// user has opted in to UMA stats and SafeBrowsing is enabled in the
// preferences.
const char kDisableClientSidePhishingDetection[] =
// Disable default component extensions with background pages - useful for
// performance tests where these pages may interfere with perf results.
const char kDisableComponentExtensionsWithBackgroundPages[] =
const char kDisableComponentUpdate[] = "disable-component-update";
// Disables installation of default apps on first run. This is used during
// automated testing.
const char kDisableDefaultApps[] = "disable-default-apps";
// Disables device discovery notifications.
const char kDisableDeviceDiscoveryNotifications[] =
// Disables Domain Reliability Monitoring.
const char kDisableDomainReliability[] = "disable-domain-reliability";
// Disable download notification.
const char kDisableDownloadNotification[] = "disable-download-notification";
// Disable extensions.
const char kDisableExtensions[] = "disable-extensions";
// Disable checking for user opt-in for extensions that want to inject script
// into file URLs (ie, always allow it). This is used during automated testing.
const char kDisableExtensionsFileAccessCheck[] =
// Disable the net::URLRequestThrottlerManager functionality for
// requests originating from extensions.
const char kDisableExtensionsHttpThrottling[] =
// Disable field trial tests configured in fieldtrial_testing_config.json.
const char kDisableFieldTrialTestingConfig[] = "disable-field-trial-config";
// Disable HTTP/2 and SPDY/3.1 protocols.
const char kDisableHttp2[] = "disable-http2";
// Disable the behavior that the second click on a launcher item (the click when
// the item is already active) minimizes the item.
const char kDisableMinimizeOnSecondLauncherItemClick[] =
// Disables the new bookmark app system.
const char kDisableNewBookmarkApps[] = "disable-new-bookmark-apps";
// Disable auto-reload of error pages if offline.
const char kDisableOfflineAutoReload[] = "disable-offline-auto-reload";
// Disable only auto-reloading error pages when the tab is visible.
const char kDisableOfflineAutoReloadVisibleOnly[] =
// Disable out-of-process V8 proxy resolver.
const char kDisableOutOfProcessPac[] = "disable-out-of-process-pac";
// Disables the Permissions Blacklist, which blocks access to permissions
// for blacklisted sites.
const char kDisablePermissionsBlacklist[] = "disable-permissions-blacklist";
// Disable pop-up blocking.
const char kDisablePopupBlocking[] = "disable-popup-blocking";
// Disable speculative TCP/IP preconnection.
const char kDisablePreconnect[] = "disable-preconnect";
// Disables print preview (For testing, and for users who don't like us. :[ )
const char kDisablePrintPreview[] = "disable-print-preview";
// Normally when the user attempts to navigate to a page that was the result of
// a post we prompt to make sure they want to. This switch may be used to
// disable that check. This switch is used during automated testing.
const char kDisablePromptOnRepost[] = "disable-prompt-on-repost";
// Disables support for the QUIC protocol.
const char kDisableQuic[] = "disable-quic";
// Disable use of Chromium's port selection for the ephemeral port via bind().
// This only has an effect if QUIC protocol is enabled.
const char kDisableQuicPortSelection[] = "disable-quic-port-selection";
// Disables using bubbles for session restore request.
const char kDisableSessionCrashedBubble[] = "disable-session-crashed-bubble";
// Disables the Site Engagement service, which records interaction with sites
// and allocates certain resources accordingly.
const char kDisableSiteEngagementService[] = "disable-site-engagement-service";
// Disables Web Notification custom layouts.
const char kDisableWebNotificationCustomLayouts[] =
// Disables WebUSB's CORS-like checks for origin->device communication.
const char kDisableWebUsbSecurity[] = "disable-webusb-security";
// Some tests seem to require the application to close when the last
// browser window is closed. Thus, we need a switch to force this behavior
// for ChromeOS Aura, disable "zero window mode".
// TODO(pkotwicz): Investigate if this bug can be removed.
// (
const char kDisableZeroBrowsersOpenForTests[] =
// Use a specific disk cache location, rather than one derived from the
// UserDatadir.
const char kDiskCacheDir[] = "disk-cache-dir";
// Forces the maximum disk space to be used by the disk cache, in bytes.
const char kDiskCacheSize[] = "disk-cache-size";
const char kDnsLogDetails[] = "dns-log-details";
// Disables prefetching of DNS information.
const char kDnsPrefetchDisable[] = "dns-prefetch-disable";
// Requests that a running browser process dump its collected histograms to a
// given file. The file is overwritten if it exists.
const char kDumpBrowserHistograms[] = "dump-browser-histograms";
// Overrides the path of Easy Unlock component app.
const char kEasyUnlockAppPath[] = "easy-unlock-app-path";
// Enables the display of a banner allowing the user to add a web
// app to their shelf (or platform-specific equivalent)
const char kEnableAddToShelf[] = "enable-add-to-shelf";
// Enables all bookmarks view in bookmark manager.
const char kEnableAllBookmarksView[] = "enable-all-bookmarks-view";
#if defined(OS_ANDROID)
const char kEnableAppLink[] = "enable-app-link";
// Enable OS integration for Chrome app file associations.
const char kEnableAppsFileAssociations[] = "enable-apps-file-associations";
// If the WebRTC logging private API is active, enables audio debug recordings.
const char kEnableAudioDebugRecordingsFromExtension[] =
// Enables the benchmarking extensions.
const char kEnableBenchmarking[] = "enable-benchmarking";
// Enables the multi-level undo system for bookmarks.
const char kEnableBookmarkUndo[] = "enable-bookmark-undo";
// Enables detection of child accounts.
const char kEnableChildAccountDetection[] =
// Enables data volume counters in the Clear Browsing Data dialog.
const char kEnableClearBrowsingDataCounters[] =
// This applies only when the process type is "service". Enables the Cloud
// Print Proxy component within the service process.
const char kEnableCloudPrintProxy[] = "enable-cloud-print-proxy";
// If true devtools experimental settings are enabled.
const char kEnableDevToolsExperiments[] = "enable-devtools-experiments";
// Enable device discovery notifications.
const char kEnableDeviceDiscoveryNotifications[] =
// Enables Domain Reliability Monitoring.
const char kEnableDomainReliability[] = "enable-domain-reliability";
// Enables experimental hotword features specific to always-on.
const char kEnableExperimentalHotwordHardware[] = "enable-hotword-hardware";
// Enables logging for extension activity.
const char kEnableExtensionActivityLogging[] =
const char kEnableExtensionActivityLogTesting[] =
// Enable the fast unload controller, which speeds up tab/window close by
// running a tab's onunload js handler independently of the GUI -
// .
const char kEnableFastUnload[] = "enable-fast-unload";
// Shows a Google icon next to context menu items powered by Google services.
const char kEnableGoogleBrandedContextMenu[] =
#endif // defined(GOOGLE_CHROME_BUILD)
// Enables the Material Design version of chrome://extensions.
const char kEnableMaterialDesignExtensions[] = "enable-md-extensions";
// Enables the Material Design feedback form.
const char kEnableMaterialDesignFeedback[] = "enable-md-feedback";
// Enables the Material Design policy page at chrome://md-policy.
const char kEnableMaterialDesignPolicyPage[] = "enable-md-policy-page";
// Runs the Native Client inside the renderer process and enables GPU plugin
// (internally adds lEnableGpuPlugin to the command line).
const char kEnableNaCl[] = "enable-nacl";
#if defined(OS_CHROMEOS)
// Enables native cups integration
const char kEnableNativeCups[] = "enable-native-cups";
#endif // defined(OS_CHROMEOS)
// Enables the use of native notifications instead of using the Chrome based
// ones.
const char kEnableNativeNotifications[] = "enable-native-notifications";
// Enables tracing for each navigation. It will attempt to trace each navigation
// for 10s, until the buffer is full, or until the next navigation.
// It only works if a URL was provided by --trace-upload-url.
const char kEnableNavigationTracing[] = "enable-navigation-tracing";
// Enables the network-related benchmarking extensions.
const char kEnableNetBenchmarking[] = "enable-net-benchmarking";
// Enables the new bookmark app system.
const char kEnableNewBookmarkApps[] = "enable-new-bookmark-apps";
// Enable auto-reload of error pages if offline.
const char kEnableOfflineAutoReload[] = "enable-offline-auto-reload";
// Only auto-reload error pages when the tab is visible.
const char kEnableOfflineAutoReloadVisibleOnly[] =
// Enables or disables panels (always on-top docked pop-up windows).
const char kEnablePanels[] = "enable-panels";
const char kDisablePanels[] = "disable-panels";
// Enables the Permissions Blacklist, which blocks access to permissions
// for blacklisted sites.
const char kEnablePermissionsBlacklist[] = "enable-permissions-blacklist";
// Enables a number of potentially annoying security features (strict mixed
// content mode, powerful feature restrictions, etc.)
const char kEnablePotentiallyAnnoyingSecurityFeatures[] =
// Enables the Power overlay in Settings.
const char kEnablePowerOverlay[] = "enable-power-overlay";
// Enables showing unregistered printers in print preview
const char kEnablePrintPreviewRegisterPromos[] =
// Enables tracking of tasks in profiler for viewing via about:profiler.
// To predominantly disable tracking (profiling), use the command line switch:
// --enable-profiling=0
// Some tracking will still take place at startup, but it will be turned off
// during chrome_browser_main.
const char kEnableProfiling[] = "enable-profiling";
// Enable or disable background mode for the Push API.
const char kEnablePushApiBackgroundMode[] = "enable-push-api-background-mode";
const char kDisablePushApiBackgroundMode[] = "disable-push-api-background-mode";
// Enables support for the QUIC protocol. This is a temporary testing flag.
const char kEnableQuic[] = "enable-quic";
// Enable use of Chromium's port selection for the ephemeral port via bind().
// This only has an effect if QUIC protocol is enabled.
const char kEnableQuicPortSelection[] = "enable-quic-port-selection";
// If the WebRTC logging private API is active, enables WebRTC event logging.
const char kEnableWebRtcEventLoggingFromExtension[] =
// Enables support for HTTP alternative services.
const char kEnableAlternativeServices[] = "enable-alternative-services";
// Enables using bubbles for session restore request instead of infobars.
const char kEnableSessionCrashedBubble[] = "enable-session-crashed-bubble";
// Enable or disable settings in a separate browser window per profile
// (see SettingsWindowEnabled() below).
const char kEnableSettingsWindow[] = "enable-settings-window";
const char kDisableSettingsWindow[] = "disable-settings-window";
// Enable the Site Engagement App Banner which triggers app install banners
// using the site engagement service rather than a navigation-based heuristic.
// Implicitly enables the site engagement service.
const char kEnableSiteEngagementAppBanner[] =
// Enable the Site Engagement Eviction Policy which evicts temporary storage
// using the site engagement service. Implicitly enables the site engagement
// service.
const char kEnableSiteEngagementEvictionPolicy[] =
// Enable the Site Engagement service, which records interaction with sites and
// allocates certain resources accordingly.
const char kEnableSiteEngagementService[] = "enable-site-engagement-service";
// Enables the supervised user managed bookmarks folder.
const char kEnableSupervisedUserManagedBookmarksFolder[] =
// Enables user control over muting tab audio from the tab strip.
const char kEnableTabAudioMuting[] = "enable-tab-audio-muting";
// Enables fanciful thumbnail processing. Used with NTP for
// instant-extended-api, where thumbnails are generally smaller.
const char kEnableThumbnailRetargeting[] = "enable-thumbnail-retargeting";
// Enables Alternate-Protocol when the port is user controlled (> 1024).
const char kEnableUserAlternateProtocolPorts[] =
// Enables a new "web app" style frame for hosted apps (including bookmark
// apps).
const char kEnableWebAppFrame[] = "enable-web-app-frame";
// Enables Web Notification custom layouts.
const char kEnableWebNotificationCustomLayouts[] =
// Values for the kExtensionContentVerification flag.
// See ContentVerifierDelegate::Mode for more explanation.
const char kExtensionContentVerificationBootstrap[] = "bootstrap";
const char kExtensionContentVerificationEnforceStrict[] = "enforce_strict";
const char kExtensionContentVerificationEnforce[] = "enforce";
// Name of the command line flag to force content verification to be on in one
// of various modes.
const char kExtensionContentVerification[] = "extension-content-verification";
// Turns on extension install verification if it would not otherwise have been
// turned on.
const char kExtensionsInstallVerification[] = "extensions-install-verification";
// Specifies a comma-separated list of extension ids that should be forced to
// be treated as not from the webstore when doing install verification.
const char kExtensionsNotWebstore[] = "extensions-not-webstore";
// Frequency in seconds for Extensions auto-update.
const char kExtensionsUpdateFrequency[] = "extensions-update-frequency";
// If this flag is present then this command line is being delegated to an
// already running chrome process via the fast path, ie: before chrome.dll is
// loaded. It is useful to tell the difference for tracking purposes.
const char kFastStart[] = "fast-start";
// Forces application mode. This hides certain system UI elements and forces
// the app to be installed if it hasn't been already.
const char kForceAppMode[] = "force-app-mode";
// This option can be used to force parameters of field trials when testing
// changes locally. The argument is a param list of (key, value) pairs prefixed
// by an associated (trial, group) pair. You specify the param list for multiple
// (trial, group) pairs with a comma separator.
// Example:
// "Trial1.Group1:k1/v1/k2/v2,Trial2.Group2:k3/v3/k4/v4"
// Trial names, groups names, parameter names, and value should all be URL
// escaped for all non-alphanumeric characters.
const char kForceFieldTrialParams[] = "force-fieldtrial-params";
// Displays the First Run experience when the browser is started, regardless of
// whether or not it's actually the First Run (this overrides kNoFirstRun).
const char kForceFirstRun[] = "force-first-run";
// Forces additional Chrome Variation Ids that will be sent in X-Client-Data
// header, specified as a 64-bit encoded list of numeric experiment ids. Ids
// prefixed with the character "t" will be treated as Trigger Variation Ids.
const char kForceVariationIds[] = "force-variation-ids";
// Forces Chrome to use localNTP instead of server (GWS) NTP.
const char kForceLocalNtp[] = "force-local-ntp";
// Enables grouping websites by domain and filtering them by period.
const char kHistoryEnableGroupByDomain[] = "enable-grouped-history";
// Specifies which page will be displayed in newly-opened tabs. We need this
// for testing purposes so that the UI tests don't depend on what comes up for
const char kHomePage[] = "homepage";
// Comma-separated list of rules that control how hostnames are mapped.
// For example:
// "MAP *" --> Forces all hostnames to be mapped to
// "MAP * proxy" --> Forces all subdomains to be
// resolved to "proxy".
// "MAP [::1]:77 --> Forces "" to resolve to IPv6 loopback.
// Will also force the port of the resulting
// socket address to be 77.
// "MAP * baz, EXCLUDE" --> Remaps everything to "baz",
// except for "".
// These mappings apply to the endpoint host in a net::URLRequest (the TCP
// connect and host resolver in a direct connection, and the CONNECT in an http
// proxy connection, and the endpoint host in a SOCKS proxy connection).
const char kHostRules[] = "host-rules";
// The maximum number of retry attempts to resolve the host. Set this to zero
// to disable host resolver retry attempts.
const char kHostResolverRetryAttempts[] = "host-resolver-retry-attempts";
// Causes net::URLFetchers to ignore requests for SSL client certificates,
// causing them to attempt an unauthenticated SSL/TLS session. This is intended
// for use when testing various service URLs (eg: kPromoServerURL, kSbURLPrefix,
// kSyncServiceURL, etc)
const char kIgnoreUrlFetcherCertRequests[] =
// Causes the browser to launch directly in incognito mode.
const char kIncognito[] = "incognito";
// Causes Chrome to initiate an installation flow for the given app.
const char kInstallChromeApp[] = "install-chrome-app";
// A list of whitelists to install for a supervised user, for testing.
// The list is of the following form: <id>[:<name>],[<id>[:<name>],...]
const char kInstallSupervisedUserWhitelists[] =
// Marks a renderer as an Instant process.
const char kInstantProcess[] = "instant-process";
// The URL for the interests API.
const char kInterestsURL[] = "interests-url";
// Dumps IPC messages sent from renderer processes to the browser process to
// the given directory. Used primarily to gather samples for IPC fuzzing.
const char kIpcDumpDirectory[] = "ipc-dump-directory";
// Used for testing - keeps browser alive after last browser window closes.
const char kKeepAliveForTest[] = "keep-alive-for-test";
// Enable Kiosk mode.
const char kKioskMode[] = "kiosk";
// Print automatically in kiosk mode. |kKioskMode| must be set as well.
// See
const char kKioskModePrinting[] = "kiosk-printing";
// Comma-separated list of directories with component extensions to load.
const char kLoadComponentExtension[] = "load-component-extension";
// Loads an extension from the specified directory.
const char kLoadExtension[] = "load-extension";
// Enables a live-reload for local NTP resources. This only works when Chrome
// is running from a Chrome source directory.
const char kLocalNtpReload[] = "local-ntp-reload";
// Makes Chrome default browser
const char kMakeDefaultBrowser[] = "make-default-browser";
// Forces the maximum disk space to be used by the media cache, in bytes.
const char kMediaCacheSize[] = "media-cache-size";
// Enables Media Router.
const char kMediaRouter[] = "media-router";
// Enables histograming of tasks served by MessageLoop. See
// about:histograms/Loop for results, which show frequency of messages on each
// thread, including APC count, object signalling count, etc.
const char kMessageLoopHistogrammer[] = "message-loop-histogrammer";
// Enables the recording of metrics reports but disables reporting. In contrast
// to kDisableMetrics, this executes all the code that a normal client would
// use for reporting, except the report is dropped rather than sent to the
// server. This is useful for finding issues in the metrics code during UI and
// performance tests.
const char kMetricsRecordingOnly[] = "metrics-recording-only";
// Allows setting a different destination ID for connection-monitoring GCM
// messages. Useful when running against a non-prod management server.
const char kMonitoringDestinationID[] = "monitoring-destination-id";
// Sets the granularity of events to capture in the network log. The mode can be
// set to one of the following values:
// "Default"
// "IncludeCookiesAndCredentials"
// "IncludeSocketBytes"
// See the functions of the corresponding name in net_log_capture_mode.h for a
// description of their meaning.
const char kNetLogCaptureMode[] = "net-log-capture-mode";
// Disables the default browser check. Useful for UI/browser tests where we
// want to avoid having the default browser info-bar displayed.
const char kNoDefaultBrowserCheck[] = "no-default-browser-check";
// By default, an https page can load images, fonts or frames from an http
// page. This switch overrides this to block this lesser mixed-content problem.
const char kNoDisplayingInsecureContent[] = "no-displaying-insecure-content";
// Disables all experiments set on about:flags. Does not disable about:flags
// itself. Useful if an experiment makes chrome crash at startup: One can start
// chrome with --no-experiments, disable the problematic lab at about:flags and
// then restart chrome without this switch again.
const char kNoExperiments[] = "no-experiments";
// Skip First Run tasks, whether or not it's actually the First Run. Overridden
// by kForceFirstRun. This does not drop the First Run sentinel and thus doesn't
// prevent first run from occuring the next time chrome is launched without this
// flag.
const char kNoFirstRun[] = "no-first-run";
// Don't send hyperlink auditing pings
const char kNoPings[] = "no-pings";
// Don't use a proxy server, always make direct connections. Overrides any
// other proxy server flags that are passed.
const char kNoProxyServer[] = "no-proxy-server";
// Disables the service process from adding itself as an autorun process. This
// does not delete existing autorun registrations, it just prevents the service
// from registering a new one.
const char kNoServiceAutorun[] = "no-service-autorun";
// Does not automatically open a browser window on startup (used when
// launching Chrome for the purpose of hosting background apps).
const char kNoStartupWindow[] = "no-startup-window";
// Disables checking whether we received an acknowledgment when registering
// a supervised user. Also disables the timeout during registration that waits
// for the ack. Useful when debugging against a server that does not
// support notifications.
const char kNoSupervisedUserAcknowledgmentCheck[] =
// Specifies the maximum number of threads to use for running the Proxy
// Autoconfig (PAC) script.
const char kNumPacThreads[] = "num-pac-threads";
// Launches URL in new browser window.
const char kOpenInNewWindow[] = "new-window";
// Specifies a comma separated list of host/port pairs to force use of QUIC.
const char kOriginToForceQuicOn[] = "origin-to-force-quic-on";
// The time that a new chrome process which is delegating to an already running
// chrome process started. (See ProcessSingleton for more details.)
const char kOriginalProcessStartTime[] = "original-process-start-time";
// Overrides the default public key for checking origin trial tokens.
const char kOriginTrialPublicKey[] = "origin-trial-public-key";
// Packages an extension to a .crx installable file from a given directory.
const char kPackExtension[] = "pack-extension";
// Optional PEM private key to use in signing packaged .crx.
const char kPackExtensionKey[] = "pack-extension-key";
// Specifies the path to the user data folder for the parent profile.
const char kParentProfile[] = "parent-profile";
// Development flag for permission request API. This flag is needed until
// the API is finalized.
// TODO(bauerb): Remove when this flag is not needed anymore.
const char kPermissionRequestApiScope[] = "permission-request-api-scope";
// Development flag for permission request API. This flag is needed until
// the API is finalized.
// TODO(bauerb): Remove when this flag is not needed anymore.
const char kPermissionRequestApiUrl[] = "permission-request-api-url";
// Use the PPAPI (Pepper) Flash found at the given path.
const char kPpapiFlashPath[] = "ppapi-flash-path";
// Report the given version for the PPAPI (Pepper) Flash. The version should be
// numbers separated by '.'s (e.g., "12.3.456.78"). If not specified, it
// defaults to "10.2.999.999".
const char kPpapiFlashVersion[] = "ppapi-flash-version";
// Triggers prerendering of pages from suggestions in the omnibox. Only has an
// effect when Instant is either disabled or restricted to search, and when
// prerender is enabled.
const char kPrerenderFromOmnibox[] = "prerender-from-omnibox";
// These are the values the kPrerenderFromOmnibox switch may have, as in
// "--prerender-from-omnibox=auto". auto: Allow field trial selection.
const char kPrerenderFromOmniboxSwitchValueAuto[] = "auto";
// disabled: No prerendering.
const char kPrerenderFromOmniboxSwitchValueDisabled[] = "disabled";
// enabled: Guaranteed prerendering.
const char kPrerenderFromOmniboxSwitchValueEnabled[] = "enabled";
// Controls speculative prerendering of pages, and content prefetching. Both
// are dispatched from <link rel=prefetch href=...> elements.
const char kPrerenderMode[] = "prerender";
// These are the values the kPrerenderMode switch may have, as in
// "--prerender=disabled".
// disabled: No prerendering.
const char kPrerenderModeSwitchValueDisabled[] = "disabled";
// enabled: Prerendering.
const char kPrerenderModeSwitchValueEnabled[] = "enabled";
// Use IPv6 only for privet HTTP.
const char kPrivetIPv6Only[] = "privet-ipv6-only";
// Outputs the product version information and quit. Used as an internal api to
// detect the installed version of Chrome on Linux.
const char kProductVersion[] = "product-version";
// Selects directory of profile to associate with the first browser launched.
const char kProfileDirectory[] = "profile-directory";
// Starts the sampling based profiler for the browser process at startup. This
// will only work if chrome has been built with the gyp variable profiling=1.
// The output will go to the value of kProfilingFile.
const char kProfilingAtStart[] = "profiling-at-start";
// Specifies a location for profiling output. This will only work if chrome has
// been built with the gyp variable profiling=1.
// {pid} if present will be replaced by the pid of the process.
// {count} if present will be incremented each time a profile is generated
// for this process.
// The default is chrome-profile-{pid}.
const char kProfilingFile[] = "profiling-file";
// Controls whether profile data is periodically flushed to a file. Normally
// the data gets written on exit but cases exist where chrome doesn't exit
// cleanly (especially when using single-process). A time in seconds can be
// specified.
const char kProfilingFlush[] = "profiling-flush";
// Forces proxy auto-detection.
const char kProxyAutoDetect[] = "proxy-auto-detect";
// Specifies a list of hosts for whom we bypass proxy settings and use direct
// connections. Ignored if --proxy-auto-detect or --no-proxy-server are also
// specified. This is a comma-separated list of bypass rules. See:
// "net/proxy/proxy_bypass_rules.h" for the format of these rules.
const char kProxyBypassList[] = "proxy-bypass-list";
// Uses the pac script at the given URL
const char kProxyPacUrl[] = "proxy-pac-url";
// Uses a specified proxy server, overrides system settings. This switch only
// affects HTTP and HTTPS requests. ARC-apps use only HTTP proxy server with the
// highest priority.
const char kProxyServer[] = "proxy-server";
// Specifies a comma separated list of QUIC connection options to send to
// the server.
const char kQuicConnectionOptions[] = "quic-connection-options";
// Specifies a comma separated list of hosts to whitelist QUIC for.
const char kQuicHostWhitelist[] = "quic-host-whitelist";
// Specifies the maximum length for a QUIC packet.
const char kQuicMaxPacketLength[] = "quic-max-packet-length";
// Specifies the version of QUIC to use.
const char kQuicVersion[] = "quic-version";
// Porvides a list of addresses to discover DevTools remote debugging targets.
// The format is <host>:<port>,...,<host>:port.
const char kRemoteDebuggingTargets[] = "remote-debugging-targets";
// Indicates the last session should be restored on startup. This overrides the
// preferences value and is primarily intended for testing. The value of this
// switch is the number of tabs to wait until loaded before 'load completed' is
// sent to the ui_test.
const char kRestoreLastSession[] = "restore-last-session";
// Disable saving pages as HTML-only, disable saving pages as HTML Complete
// (with a directory of sub-resources). Enable only saving pages as MHTML.
// See for how to remove this switch.
const char kSavePageAsMHTML[] = "save-page-as-mhtml";
// If present, safebrowsing only performs update when
// SafeBrowsingProtocolManager::ForceScheduleNextUpdate() is explicitly called.
// This is used for testing only.
const char kSbDisableAutoUpdate[] = "safebrowsing-disable-auto-update";
// TODO(lzheng): Remove this flag once the feature works fine
// (
// Disables safebrowsing feature that checks download url and downloads
// content's hash to make sure the content are not malicious.
const char kSbDisableDownloadProtection[] =
// Disables safebrowsing feature that checks for blacklisted extensions.
const char kSbDisableExtensionBlacklist[] =
// List of comma-separated sha256 hashes of executable files which the
// download-protection service should treat as "dangerous." For a file to
// show a warning, it also must be considered a dangerous filetype and not
// be whitelisted otherwise (by signature or URL) and must be on a supported
// OS. Hashes are in hex. This is used for manual testing when looking
// for ways to by-pass download protection.
const char kSbManualDownloadBlacklist[] =
// Causes the process to run as a service process.
const char kServiceProcess[] = "service";
// If true the app list will be shown.
const char kShowAppList[] = "show-app-list";
// Causes SSL key material to be logged to the specified file for debugging
// purposes. See
// for the format.
const char kSSLKeyLogFile[] = "ssl-key-log-file";
// Does not show an infobar when an extension attaches to a page using
// chrome.debugger page. Required to attach to extension background pages.
const char kSilentDebuggerExtensionAPI[] = "silent-debugger-extension-api";
// Causes Chrome to launch without opening any windows by default. Useful if
// one wishes to use Chrome as an ash server.
const char kSilentLaunch[] = "silent-launch";
// Simulates that elevation is needed to recover upgrade channel.
const char kSimulateElevatedRecovery[] = "simulate-elevated-recovery";
// Simulates a critical update being available.
const char kSimulateCriticalUpdate[] = "simulate-critical-update";
// Simulates that current version is outdated.
const char kSimulateOutdated[] = "simulate-outdated";
// Simulates that current version is outdated and auto-update is off.
const char kSimulateOutdatedNoAU[] = "simulate-outdated-no-au";
// Simulates an update being available.
const char kSimulateUpgrade[] = "simulate-upgrade";
// Speculative resource prefetching.
const char kSpeculativeResourcePrefetching[] =
// Speculative resource prefetching is disabled.
const char kSpeculativeResourcePrefetchingDisabled[] = "disabled";
// Speculative resource prefetching will only learn about resources that need to
// be prefetched but will not prefetch them.
const char kSpeculativeResourcePrefetchingLearning[] = "learning";
// Speculative resource prefetching is enabled.
const char kSpeculativeResourcePrefetchingEnabled[] = "enabled";
#if defined(OS_ANDROID)
// Enables use of the Android spellchecker.
const char kEnableAndroidSpellChecker[] = "enable-android-spellchecker";
// Enables participation in the field trial for user feedback to spelling
// service.
const char kEnableSpellingFeedbackFieldTrial[] =
// Specifies the URL where spelling service feedback data will be sent instead
// of the default URL. This switch is for temporary testing only.
// TODO(rouslan): Remove this flag when feedback testing is complete. Revisit by
// August 2013.
const char kSpellingServiceFeedbackUrl[] = "spelling-service-feedback-url";
// Specifies the number of seconds between sending batches of feedback to
// spelling service. The default is 30 minutes. The minimum is 5 seconds. This
// switch is for temporary testing only.
// TODO(rouslan): Remove this flag when feedback testing is complete. Revisit by
// August 2013.
const char kSpellingServiceFeedbackIntervalSeconds[] =
// Starts the browser maximized, regardless of any previous settings.
const char kStartMaximized[] = "start-maximized";
// Sets the supervised user ID for any loaded or newly created profile to the
// given value. Pass an empty string to mark the profile as non-supervised.
// Used for testing.
const char kSupervisedUserId[] = "managed-user-id";
// Enables/disables SafeSites filtering for supervised users. Possible values
// are "enabled", "disabled", "blacklist-only", and "online-check-only".
const char kSupervisedUserSafeSites[] = "supervised-user-safesites";
// Used to authenticate requests to the Sync service for supervised users.
// Setting this switch also causes Sync to be set up for a supervised user.
const char kSupervisedUserSyncToken[] = "managed-user-sync-token";
// Frequency in Milliseconds for system log uploads. Should only be used for
// testing purposes.
const char kSystemLogUploadFrequency[] = "system-log-upload-frequency";
// Passes the name of the current running automated test to Chrome.
const char kTestName[] = "test-name";
// Experimental. Shows a dialog asking the user to try chrome. This flag is to
// be used only by the upgrade process.
const char kTryChromeAgain[] = "try-chrome-again";
// Overrides per-origin quota settings to unlimited storage for any
// apps/origins. This should be used only for testing purpose.
const char kUnlimitedStorage[] = "unlimited-storage";
// Treat given (insecure) origins as secure origins. Multiple origins can be
// supplied. Has no effect unless --user-data-dir is also supplied.
// Example:
// --unsafely-treat-insecure-origin-as-secure=http://a.test,http://b.test
// --user-data-dir=/test/only/profile/dir
const char kUnsafelyTreatInsecureOriginAsSecure[] =
// A string used to override the default user agent with a custom one.
const char kUserAgent[] = "user-agent";
// Specifies the user data directory, which is where the browser will look for
// all of its state.
const char kUserDataDir[] = "user-data-dir";
// Examines a .crx for validity and prints the result.
const char kValidateCrx[] = "validate-crx";
// Uses experimental simple cache backend if possible.
const char kUseSimpleCacheBackend[] = "use-simple-cache-backend";
// Enables using an in-process Mojo service for the v8 proxy resolver.
const char kV8PacMojoInProcess[] = "v8-pac-mojo-in-process";
// Enables using an out-of-process Mojo service for the v8 proxy resolver.
const char kV8PacMojoOutOfProcess[] = "v8-pac-mojo-out-of-process";
// Prints version information and quits.
const char kVersion[] = "version";
// Specify the initial window position: --window-position=x,y
const char kWindowPosition[] = "window-position";
// Specify the initial window size: --window-size=w,h
const char kWindowSize[] = "window-size";
// Specify the initial window workspace: --window-workspace=id
const char kWindowWorkspace[] = "window-workspace";
// Uses WinHTTP to fetch and evaluate PAC scripts. Otherwise the default is to
// use Chromium's network stack to fetch, and V8 to evaluate.
const char kWinHttpProxyResolver[] = "winhttp-proxy-resolver";
// Specifies which category option was clicked in the Windows Jumplist that
// resulted in a browser startup.
const char kWinJumplistAction[] = "win-jumplist-action";
#if defined(OS_ANDROID)
// Android authentication account type for SPNEGO authentication
const char kAuthAndroidNegotiateAccountType[] = "auth-spnego-account-type";
// Disables Contextual Search.
const char kDisableContextualSearch[] = "disable-contextual-search";
// Enable the accessibility tab switcher.
const char kEnableAccessibilityTabSwitcher[] =
// Enables Contextual Search.
const char kEnableContextualSearch[] = "enable-contextual-search";
// Enables chrome hosted mode for Android.
const char kEnableHostedMode[] = "enable-hosted-mode";
// Enables a hung renderer InfoBar allowing the user to close or wait on
// unresponsive web content.
const char kEnableHungRendererInfoBar[] = "enable-hung-renderer-infobar";
// Specifies Android phone page loading progress bar animation.
const char kProgressBarAnimation[] = "progress-bar-animation";
// Enabled tab switcher in document mode.
const char kEnableTabSwitcherInDocumentMode[] =
// Switch to an existing tab for a suggestion opened from the New Tab Page.
const char kNtpSwitchToExistingTab[] = "ntp-switch-to-existing-tab";
#endif // defined(OS_ANDROID)
#if defined(USE_ASH)
const char kOpenAsh[] = "open-ash";
#if defined(OS_POSIX) && !defined(OS_MACOSX) && !defined(OS_CHROMEOS)
// These flags show the man page on Linux. They are equivalent to each
// other.
const char kHelp[] = "help";
const char kHelpShort[] = "h";
// Specifies which password store to use (detect, default, gnome, kwallet).
const char kPasswordStore[] = "password-store";
#if defined(OS_MACOSX)
// Prevents Chrome from quitting when Chrome Apps are open.
const char kAppsKeepChromeAliveInTests[] = "apps-keep-chrome-alive-in-tests";
// Shows a notification when quitting Chrome with hosted apps running. Default
// behavior is to also quit all hosted apps.
const char kHostedAppQuitNotification[] = "enable-hosted-app-quit-notification";
// Disable the toolkit-views App Info dialog for Mac.
const char kDisableAppInfoDialogMac[] = "disable-app-info-dialog-mac";
// Disables custom Cmd+` window cycling for platform apps and hosted apps.
const char kDisableAppWindowCycling[] = "disable-app-window-cycling";
// Disables app shim creation for hosted apps on Mac.
const char kDisableHostedAppShimCreation[] = "disable-hosted-app-shim-creation";
// Prevents hosted apps from being opened in windows on Mac.
const char kDisableHostedAppsInWindows[] = "disable-hosted-apps-in-windows";
// Disables use of toolkit-views based native app windows.
const char kDisableMacViewsNativeAppWindows[] =
// Prevents the save password bubble from being enabled.
const char kDisableSavePasswordBubble[] = "disable-save-password-bubble";
// Disables Translate experimental new UX which replaces the infobar.
const char kDisableTranslateNewUX[] = "disable-translate-new-ux";
// Enable the toolkit-views App Info dialog for Mac. This is accessible from
// chrome://apps and chrome://extensions and is already enabled on non-mac.
const char kEnableAppInfoDialogMac[] = "enable-app-info-dialog-mac";
// Enables custom Cmd+` window cycling for platform apps and hosted apps.
const char kEnableAppWindowCycling[] = "enable-app-window-cycling";
// Enables tab detaching in fullscreen mode on Mac.
const char kEnableFullscreenTabDetaching[] = "enable-fullscreen-tab-detaching";
// Allows hosted apps to be opened in windows on Mac.
const char kEnableHostedAppsInWindows[] = "enable-hosted-apps-in-windows";
// Enables use of toolkit-views based native app windows.
const char kEnableMacViewsNativeAppWindows[] =
// Causes Chrome to use an equivalent toolkit-views version of a browser dialog
// when available, rather than a Cocoa one.
const char kEnableMacViewsDialogs[] = "enable-mac-views-dialogs";
// Enables save password prompt bubble.
const char kEnableSavePasswordBubble[] = "enable-save-password-bubble";
// Enables Translate experimental new UX which replaces the infobar.
const char kEnableTranslateNewUX[] = "enable-translate-new-ux";
// This is how the metrics client ID is passed from the browser process to its
// children. With Crashpad, the metrics client ID is distinct from the crash
// client ID.
const char kMetricsClientID[] = "metrics-client-id";
// A process type (switches::kProcessType) that relaunches the browser. See
// chrome/browser/mac/relauncher.h.
const char kRelauncherProcess[] = "relauncher";
// When switches::kProcessType is switches::kRelauncherProcess, if this switch
// is also present, the relauncher process will unmount and eject a mounted disk
// image and move its disk image file to the trash. The argument's value must
// be a BSD device name of the form "diskN" or "diskNsM".
const char kRelauncherProcessDMGDevice[] = "dmg-device";
#endif // defined(OS_MACOSX)
#if defined(OS_WIN)
// Fallback to XPS. By default connector uses CDD.
const char kEnableCloudPrintXps[] = "enable-cloud-print-xps";
// Force-enables the profile shortcut manager. This is needed for tests since
// they use a custom-user-data-dir which disables this.
const char kEnableProfileShortcutManager[] = "enable-profile-shortcut-manager";
// Whether or not the browser should warn if the profile is on a network share.
// This flag is only relevant for Windows currently.
const char kNoNetworkProfileWarning[] = "no-network-profile-warning";
// /prefetch:# arguments for the browser process launched in background mode and
// for the watcher process. Use profiles 5, 6 and 7 as documented on
// kPrefetchArgument* in
const char kPrefetchArgumentBrowserBackground[] = "/prefetch:5";
const char kPrefetchArgumentWatcher[] = "/prefetch:6";
// /prefetch:7 is used by crashpad, which can't depend on constants defined
// here. See for more details.
// Makes Windows happy by allowing it to show "Enable access to this program"
// checkbox in Add/Remove Programs->Set Program Access and Defaults. This only
// shows an error box because the only way to hide Chrome is by uninstalling
// it.
const char kHideIcons[] = "hide-icons";
// See kHideIcons.
const char kShowIcons[] = "show-icons";
// Runs un-installation steps that were done by chrome first-run.
const char kUninstall[] = "uninstall";
// Requests that Chrome launch the Metro viewer process via the given appid
// (which is assumed to be registered as default browser) and synchronously
// connect to it.
const char kViewerLaunchViaAppId[] = "viewer-launch-via-appid";
// Causes the process to run as a watcher process.
const char kWatcherProcess[] = "watcher";
// Indicates that chrome was launched to service a search request in Windows 8.
const char kWindows8Search[] = "windows8-search";
#endif // defined(OS_WIN)
#if defined(ENABLE_IPC_FUZZER)
// Specifies the testcase used by the IPC fuzzer.
const char kIpcFuzzerTestcase[] = "ipc-fuzzer-testcase";
// Enables support to debug printing subsystem.
const char kDebugPrint[] = "debug-print";
// Disables the new implementation of the task manager.
const char kDisableNewTaskManager[] = "disable-new-task-manager";
#endif // defined(ENABLE_TASK_MANAGER)
// Enables Wayland display server support.
const char kEnableWaylandServer[] = "enable-wayland-server";
#if defined(OS_ANDROID)
// Forces the update menu item to show.
const char kForceShowUpdateMenuItem[] = "force-show-update-menu-item";
// Forces a summary to be displayed below the update menu item.
const char kForceShowUpdateMenuItemSummary[] = "show_summary";
// Forces the new features summary to be displayed below the update menu item.
const char kForceShowUpdateMenuItemNewFeaturesSummary[] =
// Forces a custom summary to be displayed below the update menu item.
const char kForceShowUpdateMenuItemCustomSummary[] = "custom_summary";
// Forces the update menu badge to show.
const char kForceShowUpdateMenuBadge[] = "force-show-update-menu-badge";
// Sets the market URL for Chrome for use in testing.
const char kMarketUrlForTesting[] = "market-url-for-testing";
// Specifies a particular tab management experiment to enable.
const char kTabManagementExperimentTypeDisabled[] =
const char kTabManagementExperimentTypeAnise[] =
const char kTabManagementExperimentTypeBasil[] =
const char kTabManagementExperimentTypeChive[] =
const char kTabManagementExperimentTypeDill[] =
const char kTabManagementExperimentTypeElderberry[] =
#endif // defined(OS_ANDROID)
#if defined(OS_WIN) || defined(OS_LINUX)
extern const char kEnableInputImeAPI[] = "enable-input-ime-api";
extern const char kDisableInputImeAPI[] = "disable-input-ime-api";
bool AboutInSettingsEnabled() {
return SettingsWindowEnabled() &&
bool MdExtensionsEnabled() {
return base::CommandLine::ForCurrentProcess()->HasSwitch(
bool MdFeedbackEnabled() {
return base::CommandLine::ForCurrentProcess()->HasSwitch(
bool MdPolicyPageEnabled() {
return base::CommandLine::ForCurrentProcess()->HasSwitch(
bool SettingsWindowEnabled() {
#if defined(OS_CHROMEOS)
return !base::CommandLine::ForCurrentProcess()->HasSwitch(
return base::CommandLine::ForCurrentProcess()->HasSwitch(
#if defined(OS_CHROMEOS)
bool PowerOverlayEnabled() {
return base::CommandLine::ForCurrentProcess()->HasSwitch(
bool NewTaskManagerEnabled() {
#if defined(OS_MACOSX)
return false; // The new task manager hasn't been adopted on Mac yet.
return !base::CommandLine::ForCurrentProcess()->HasSwitch(
#endif // defined(OS_MACOSX)
#endif // defined(ENABLE_TASK_MANAGER)
// -----------------------------------------------------------------------------
// You were going to just dump your switches here, weren't you? Instead, please
// put them in alphabetical order above, or in order inside the appropriate
// ifdef at the bottom. The order should match the header.
// -----------------------------------------------------------------------------
} // namespace switches