blob: 99078eefa7a11b872e9db712033509fe7078276c [file] [log] [blame]
/*
* Copyright (C) 2006 The Android Open Source Project
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#ifndef SKIA_CONFIG_SKUSERCONFIG_H_
#define SKIA_CONFIG_SKUSERCONFIG_H_
/* SkTypes.h, the root of the public header files, does the following trick:
#include <SkPreConfig.h>
#include <SkUserConfig.h>
#include <SkPostConfig.h>
SkPreConfig.h runs first, and it is responsible for initializing certain
skia defines.
SkPostConfig.h runs last, and its job is to just check that the final
defines are consistent (i.e. that we don't have mutually conflicting
defines).
SkUserConfig.h (this file) runs in the middle. It gets to change or augment
the list of flags initially set in preconfig, and then postconfig checks
that everything still makes sense.
Below are optional defines that add, subtract, or change default behavior
in Skia. Your port can locally edit this file to enable/disable flags as
you choose, or these can be declared on your command line (i.e. -Dfoo).
By default, this include file will always default to having all of the flags
commented out, so including it will have no effect.
*/
///////////////////////////////////////////////////////////////////////////////
/* Skia has lots of debug-only code. Often this is just null checks or other
parameter checking, but sometimes it can be quite intrusive (e.g. check that
each 32bit pixel is in premultiplied form). This code can be very useful
during development, but will slow things down in a shipping product.
By default, these mutually exclusive flags are defined in SkPreConfig.h,
based on the presence or absence of NDEBUG, but that decision can be changed
here.
*/
//#define SK_DEBUG
//#define SK_RELEASE
#ifdef DCHECK_ALWAYS_ON
#undef SK_RELEASE
#define SK_DEBUG
#endif
/* Define this to provide font subsetter for font subsetting when generating
PDF documents.
*/
#define SK_PDF_USE_SFNTLY
// ===== Begin Chrome-specific definitions =====
#ifdef SK_DEBUG
#define SK_REF_CNT_MIXIN_INCLUDE "sk_ref_cnt_ext_debug.h"
#else
#define SK_REF_CNT_MIXIN_INCLUDE "sk_ref_cnt_ext_release.h"
#endif
#define SK_MSCALAR_IS_FLOAT
#undef SK_MSCALAR_IS_DOUBLE
// Log the file and line number for assertions.
#define SkDebugf(...) SkDebugf_FileLine(__FILE__, __LINE__, false, __VA_ARGS__)
SK_API void SkDebugf_FileLine(const char* file, int line, bool fatal,
const char* format, ...);
// Marking the debug print as "fatal" will cause a debug break, so we don't need
// a separate crash call here.
#define SK_DEBUGBREAK(cond) do { if (!(cond)) { \
SkDebugf_FileLine(__FILE__, __LINE__, true, \
"%s:%d: failed assertion \"%s\"\n", \
__FILE__, __LINE__, #cond); } } while (false)
#if !defined(ANDROID) // On Android, we use the skia default settings.
#define SK_A32_SHIFT 24
#define SK_R32_SHIFT 16
#define SK_G32_SHIFT 8
#define SK_B32_SHIFT 0
#endif
#if defined(SK_BUILD_FOR_MAC)
#define SK_CPU_LENDIAN
#undef SK_CPU_BENDIAN
#elif defined(SK_BUILD_FOR_UNIX) || defined(SK_BUILD_FOR_ANDROID)
// Prefer FreeType's emboldening algorithm to Skia's
// TODO: skia used to just use hairline, but has improved since then, so
// we should revisit this choice...
#define SK_USE_FREETYPE_EMBOLDEN
#if defined(SK_BUILD_FOR_UNIX) && defined(SK_CPU_BENDIAN)
// Above we set the order for ARGB channels in registers. I suspect that, on
// big endian machines, you can keep this the same and everything will work.
// The in-memory order will be different, of course, but as long as everything
// is reading memory as words rather than bytes, it will all work. However, if
// you find that colours are messed up I thought that I would leave a helpful
// locator for you. Also see the comments in
// base/gfx/bitmap_platform_device_linux.h
#error Read the comment at this location
#endif
#endif
// The default crash macro writes to badbeef which can cause some strange
// problems. Instead, pipe this through to the logging function as a fatal
// assertion.
#define SK_CRASH() SkDebugf_FileLine(__FILE__, __LINE__, true, "SK_CRASH")
// These flags are no longer defined in Skia, but we have them (temporarily)
// until we update our call-sites (typically these are for API changes).
//
// Remove these as we update our sites.
// Workaround for poor anisotropic mipmap quality,
// pending Skia ripmap support.
// (https://bugs.chromium.org/p/skia/issues/detail?id=4863)
#ifndef SK_SUPPORT_LEGACY_ANISOTROPIC_MIPMAP_SCALE
# define SK_SUPPORT_LEGACY_ANISOTROPIC_MIPMAP_SCALE
#endif
// Remove this after we fixed all the issues related to the new SDF algorithm
// (https://codereview.chromium.org/1643143002)
#ifndef SK_USE_LEGACY_DISTANCE_FIELDS
#define SK_USE_LEGACY_DISTANCE_FIELDS
#endif
// skbug.com/4783
#ifndef SK_SUPPORT_LEGACY_DRAWLOOPER
#define SK_SUPPORT_LEGACY_DRAWLOOPER
#endif
// Skia is enabling this feature soon. Chrome probably does
// not want it for M64
#ifndef SK_DISABLE_EXPLICIT_GPU_RESOURCE_ALLOCATION
#define SK_DISABLE_EXPLICIT_GPU_RESOURCE_ALLOCATION
#endif
// Chrome should only sort opLists within DDLs
#ifndef SK_DISABLE_OPLIST_SORTING
#define SK_DISABLE_OPLIST_SORTING
#endif
#ifndef SK_IGNORE_LINEONLY_AA_CONVEX_PATH_OPTS
#define SK_IGNORE_LINEONLY_AA_CONVEX_PATH_OPTS
#endif
// Max. verb count for paths rendered by the edge-AA tessellating path renderer.
#define GR_AA_TESSELLATOR_MAX_VERB_COUNT 100
#ifndef SK_SUPPORT_LEGACY_AAA_CHOICE
#define SK_SUPPORT_LEGACY_AAA_CHOICE
#endif
// We're turning this off indefinitely,
// until we can figure out some fundamental problems with its approach.
//
// See chromium:913223, skia:6886.
#define SK_DISABLE_DAA
// Staging for lowp::bilerp_clamp_8888, and for planned misc. others.
#define SK_DISABLE_LOWP_BILERP_CLAMP_CLAMP_STAGE
#define SK_DISABLE_NEXT_BATCH_OF_LOWP_STAGES
///////////////////////// Imported from BUILD.gn and skia_common.gypi
/* In some places Skia can use static initializers for global initialization,
* or fall back to lazy runtime initialization. Chrome always wants the latter.
*/
#define SK_ALLOW_STATIC_GLOBAL_INITIALIZERS 0
/* Restrict formats for Skia font matching to SFNT type fonts. */
#define SK_FONT_CONFIG_INTERFACE_ONLY_ALLOW_SFNT_FONTS
#define SK_IGNORE_BLURRED_RRECT_OPT
#define SK_USE_DISCARDABLE_SCALEDIMAGECACHE
#define SK_ATTR_DEPRECATED SK_NOTHING_ARG1
#define GR_GL_CUSTOM_SETUP_HEADER "GrGLConfig_chrome.h"
#endif