third_party/sqlite/sqlite-src-3280000/ext/fts5/test/fts5fault1.test

# 2014 June 17
#
# The author disclaims copyright to this source code.  In place of
# a legal notice, here is a blessing:
#
#    May you do good and not evil.
#    May you find forgiveness for yourself and forgive others.
#    May you share freely, never taking more than you give.
#
#*************************************************************************
# This file implements regression tests for SQLite library.  The
# focus of this script is testing the FTS5 module.
#

source [file join [file dirname [info script]] fts5_common.tcl]
source $testdir/malloc_common.tcl
set testprefix fts5fault1

# If SQLITE_ENABLE_FTS3 is defined, omit this file.
ifcapable !fts5 {
  finish_test
  return
}

# Simple tests:
#
#   1: CREATE VIRTUAL TABLE
#   2: INSERT statement
#   3: DELETE statement
#   4: MATCH expressions
#
#

faultsim_save_and_close
do_faultsim_test 1 -faults ioerr-t* -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { CREATE VIRTUAL TABLE t1 USING fts5(a, b, prefix='1, 2, 3') }
} -test {
  faultsim_test_result {0 {}} {1 {vtable constructor failed: t1}}
}

reset_db
do_execsql_test 2.0 {
  CREATE VIRTUAL TABLE t1 USING fts5(a, b, prefix='1, 2, 3');
}
faultsim_save_and_close
do_faultsim_test 2 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { 
    INSERT INTO t1 VALUES('a b c', 'a bc def ghij klmno');
  }
} -test {
  faultsim_test_result {0 {}} {1 {vtable constructor failed: t1}}
}

reset_db
do_execsql_test 3.0 {
  CREATE VIRTUAL TABLE t1 USING fts5(a, b, prefix='1, 2, 3');
  INSERT INTO t1 VALUES('a b c', 'a bc def ghij klmno');
}
faultsim_save_and_close
do_faultsim_test 3 -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { DELETE FROM t1 }
} -test {
  faultsim_test_result {0 {}} {1 {vtable constructor failed: t1}}
}

reset_db
do_execsql_test 4.0 {
  CREATE VIRTUAL TABLE t2 USING fts5(a, b);
  INSERT INTO t2 VALUES('m f a jj th q gi ar',   'hj n h h sg j i m');
  INSERT INTO t2 VALUES('nr s t g od j kf h',    'sb h aq rg op rb n nl');
  INSERT INTO t2 VALUES('do h h pb p p q fr',    'c rj qs or cr a l i');
  INSERT INTO t2 VALUES('lk gp t i lq mq qm p',  'h mr g f op ld aj h');
  INSERT INTO t2 VALUES('ct d sq kc qi k f j',   'sn gh c of g s qt q');
  INSERT INTO t2 VALUES('d ea d d om mp s ab',   'dm hg l df cm ft pa c');
  INSERT INTO t2 VALUES('tc dk c jn n t sr ge',  'a a kn bc n i af h');
  INSERT INTO t2 VALUES('ie ii d i b sa qo rf',  'a h m aq i b m fn');
  INSERT INTO t2 VALUES('gs r fo a er m h li',   'tm c p gl eb ml q r');
  INSERT INTO t2 VALUES('k fe fd rd a gi ho kk', 'ng m c r d ml rm r');
}
faultsim_save_and_close

foreach {tn expr res} {
  1 { dk  }           7
  2 { m f }           1
  3 { f*  }           {1 3 4 5 6 8 9 10}
  4 { m OR f }        {1 4 5 8 9 10}
  5 { sn + gh }       {5}
  6 { "sn gh" }       {5}
  7 { NEAR(r a, 5) }  {9}
  8 { m* f* }         {1 4 6 8 9 10}
  9 { m* + f* }       {1 8}
  10 { c NOT p }       {5 6 7 10}
} {
  do_faultsim_test 4.$tn -prep {
    faultsim_restore_and_reopen
  } -body "
    execsql { SELECT rowid FROM t2 WHERE t2 MATCH '$expr' }
  " -test "
    faultsim_test_result {[list 0 $res]} {1 {vtable constructor failed: t2}}
  "
}


#-------------------------------------------------------------------------
# The following tests use a larger database populated with random data.
#
# The database page size is set to 512 bytes and the FTS5 page size left
# at the default 1000 bytes. This means that reading a node may require
# pulling an overflow page from disk, which is an extra opportunity for
# an error to occur.
#
reset_db
do_execsql_test 5.0.1 { 
  PRAGMA main.page_size = 512;
  CREATE VIRTUAL TABLE x1 USING fts5(a, b);
  PRAGMA main.page_size;
} {512}

proc rnddoc {n} {
  set map [list 0 a  1 b  2 c  3 d  4 e  5 f  6 g  7 h  8 i  9 j]
  set doc [list]
  for {set i 0} {$i < $n} {incr i} {
    lappend doc [string map $map [format %.3d [expr int(rand()*1000)]]]
  }
  set doc
}
db func rnddoc rnddoc

do_execsql_test 5.0.2 {
  WITH r(a, b) AS (
    SELECT rnddoc(6), rnddoc(6) UNION ALL
    SELECT rnddoc(6), rnddoc(6) FROM r
  )
  INSERT INTO x1 SELECT * FROM r LIMIT 10000;
}

set res [db one {
  SELECT count(*) FROM x1 WHERE x1.a LIKE '%abc%' OR x1.b LIKE '%abc%'}
]

do_faultsim_test 5.1 -faults oom* -body {
  execsql { SELECT count(*) FROM x1 WHERE x1 MATCH 'abc' }
} -test {
  faultsim_test_result [list 0 $::res]
}
do_faultsim_test 5.2 -faults oom* -body {
  execsql { SELECT count(*) FROM x1 WHERE x1 MATCH 'abcd' }
} -test {
  faultsim_test_result [list 0 0]
}

proc test_astar {a b} {
  return [expr { [regexp {a[^ ][^ ]} $a] || [regexp {a[^ ][^ ]} $b] }]
}
db func test_astar test_astar

set res [db one { SELECT count(*) FROM x1 WHERE test_astar(a, b) } ]
do_faultsim_test 5.3 -faults oom* -body {
  execsql { SELECT count(*) FROM x1 WHERE x1 MATCH 'a*' }
} -test {
  faultsim_test_result [list 0 $::res]
}

do_faultsim_test 5.4 -faults oom* -prep {
  db close
  sqlite3 db test.db
} -body {
  execsql { INSERT INTO x1 VALUES('a b c d', 'e f g h') }
} -test {
  faultsim_test_result [list 0 {}]
}

do_faultsim_test 5.5.1 -faults oom* -body {
  execsql { 
    SELECT count(fts5_decode(rowid, block)) FROM x1_data WHERE rowid=1
  }
} -test {
  faultsim_test_result [list 0 1]
}
do_faultsim_test 5.5.2 -faults oom* -body {
  execsql { 
    SELECT count(fts5_decode(rowid, block)) FROM x1_data WHERE rowid=10
  }
} -test {
  faultsim_test_result [list 0 1]
}
do_faultsim_test 5.5.3 -faults oom* -body {
  execsql { 
    SELECT count(fts5_decode(rowid, block)) FROM x1_data WHERE rowid = (
      SELECT min(rowid) FROM x1_data WHERE rowid>20
    )
  }
} -test {
  faultsim_test_result [list 0 1]
}
do_faultsim_test 5.5.4 -faults oom* -body {
  execsql { 
    SELECT count(fts5_decode(rowid, block)) FROM x1_data WHERE rowid = (
      SELECT max(rowid) FROM x1_data 
    )
  }
} -test {
  faultsim_test_result [list 0 1]
}

#-------------------------------------------------------------------------
#
reset_db
do_execsql_test 6.0 {
  CREATE VIRTUAL TABLE x1 USING fts5(x);
  INSERT INTO x1(x1, rank) VALUES('automerge', 0);

  INSERT INTO x1 VALUES('a b c'); -- 1
  INSERT INTO x1 VALUES('a b c'); -- 2
  INSERT INTO x1 VALUES('a b c'); -- 3
  INSERT INTO x1 VALUES('a b c'); -- 4
  INSERT INTO x1 VALUES('a b c'); -- 5
  INSERT INTO x1 VALUES('a b c'); -- 6
  INSERT INTO x1 VALUES('a b c'); -- 7
  INSERT INTO x1 VALUES('a b c'); -- 8
  INSERT INTO x1 VALUES('a b c'); -- 9
  INSERT INTO x1 VALUES('a b c'); -- 10
  INSERT INTO x1 VALUES('a b c'); -- 11
  INSERT INTO x1 VALUES('a b c'); -- 12
  INSERT INTO x1 VALUES('a b c'); -- 13
  INSERT INTO x1 VALUES('a b c'); -- 14
  INSERT INTO x1 VALUES('a b c'); -- 15

  SELECT count(*) FROM x1_data;
} {17}

faultsim_save_and_close

do_faultsim_test 6.1 -faults oom* -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { INSERT INTO x1 VALUES('d e f') }
} -test {
  faultsim_test_result [list 0 {}]
  if {$testrc==0} {
    set nCnt [db one {SELECT count(*) FROM x1_data}]
    if {$nCnt!=3} { error "expected 3 entries but there are $nCnt" }
  }
}

do_faultsim_test 6.2 -faults oom* -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { INSERT INTO x1(x1, rank) VALUES('pgsz', 32) }
} -test {
  faultsim_test_result [list 0 {}]
}

do_faultsim_test 6.3 -faults oom-* -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { INSERT INTO x1(x1) VALUES('integrity-check') }
} -test {
  faultsim_test_result [list 0 {}]
}

do_faultsim_test 6.4 -faults oom-* -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { INSERT INTO x1(x1) VALUES('optimize') }
} -test {
  faultsim_test_result [list 0 {}]
}

#-------------------------------------------------------------------------
#
do_faultsim_test 7.0 -faults oom* -prep {
  catch { db close }
} -body {
  sqlite3 db test.db
} -test {
  faultsim_test_result [list 0 {}] {1 {}} {1 {initialization of fts5 failed: }}
}

#-------------------------------------------------------------------------
# A prefix query against a large document set.
#
proc rnddoc {n} {
  set map [list 0 a  1 b  2 c  3 d  4 e  5 f  6 g  7 h  8 i  9 j]
  set doc [list]
  for {set i 0} {$i < $n} {incr i} {
    lappend doc "x[string map $map [format %.3d [expr int(rand()*1000)]]]"
  }
  set doc
}

reset_db
db func rnddoc rnddoc

do_test 8.0 {
  execsql { CREATE VIRTUAL TABLE x1 USING fts5(a) }
  set ::res [list]
  for {set i 1} {$i<100} {incr i 1} {
    execsql { INSERT INTO x1 VALUES( rnddoc(50) ) }
    lappend ::res $i
  }
} {}

do_faultsim_test 8.1 -faults oom* -prep {
} -body {
  execsql { 
    SELECT rowid FROM x1 WHERE x1 MATCH 'x*'
  }
} -test {
  faultsim_test_result [list 0 $::res]
}

#-------------------------------------------------------------------------
# Segment promotion.
#
do_test 9.0 {
  reset_db
  db func rnddoc fts5_rnddoc
  execsql {
    CREATE VIRTUAL TABLE s2 USING fts5(x);
    INSERT INTO s2(s2, rank) VALUES('pgsz', 32);
    INSERT INTO s2(s2, rank) VALUES('automerge', 0);
  }

  for {set i 1} {$i <= 16} {incr i} {
    execsql { INSERT INTO s2 VALUES(rnddoc(5)) }
  }
  fts5_level_segs s2
} {0 1}
set insert_doc [db one {SELECT rnddoc(160)}]
faultsim_save_and_close

do_faultsim_test 9.1 -faults oom-* -prep {
  faultsim_restore_and_reopen
} -body {
  execsql { INSERT INTO s2 VALUES($::insert_doc) }
} -test {
  faultsim_test_result {0 {}}
  if {$testrc==0} {
    set ls [fts5_level_segs s2]
    if {$ls != "2 0"} { error "fts5_level_segs says {$ls}" }
  }
}



finish_test