third_party/WebKit/LayoutTests/svg/W3C-SVG-1.1/animate-elem-63-t.svg - chromium/src - Git at Google

 <?xml version="1.0" encoding="UTF-8"?>
 <!--======================================================================-->
 <!--=  Copyright 2004 World Wide Web Consortium, (Massachusetts          =-->
 <!--=  Institute of Technology, Institut National de Recherche en        =-->
 <!--=  Informatique et en Automatique, Keio University). All Rights      =-->
 <!--=  Reserved. See http://www.w3.org/Consortium/Legal/.                =-->
 <!--======================================================================--><!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1 Tiny//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11-tiny.dtd">

 <svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" baseProfile="tiny" id="svg-root" width="100%" height="100%" viewBox="0 0 480 360">

     <SVGTestCase xmlns:testcase="http://www.w3.org/2000/02/svg/testsuite/description/" xmlns="http://www.w3.org/2000/02/svg/testsuite/description/" reviewer="CN" owner="VH" desc="Test multiple on multiple end conditions in the end attribute" status="accepted" version="$Revision: 1.6 $" testname="$RCSfile: animate-elem-63-t.svg,v $">

         <OperatorScript>

             <Paragraph>

                 This tests validates multiple end conditions in the end attribute,

                 assuming support for the &lt;set&gt; element and setting the

                 dur attribute to 'indefinite'.

             </Paragraph>

             <Paragraph>

     		The test validates the various possibilities for the end attribute

                 value: multiple offset values, multiple event base values, multiple sync base

                 values, multiple repeat values, and multiple accessKey values. Finally,

                 the test validates that end values of different kinds can be mixed.

             </Paragraph>


             <Paragraph>

                 The test shows 6 rows where a red rectangle's  x attribute is animated

                 with &lt;set&gt; elements.

             </Paragraph>


             <Paragraph>

                 On the first three rows, the red rectangles should show on the left from

                 0 to 1s. From 1 to 2s, the rectangles should show on the right. Then

                 the rectangles should show on the left from 2 to 4s, then on the right

                 again from 4 to 5s and come back to the left position and stay there

                 after 5s.

             </Paragraph>

             <Paragraph>

                 On the fourth row, the rectangle's end condition is event based

                 and requires a user click. One of the end condition is defined

                 to be 5 seconds prior to the click and one is defined to be 5

                 seconds after the click. If the user clicks on the rectangle

                 before 5 seconds (in document time), the red rectangle we move

                 to the left position 5 seconds after the click (because the

                 'click - 5s' end time resolves to a time prior to the begin

                 time). If the user clicks after 5 seconds (in document time),

                 then the red rectangle moves to the left position immediately because

                 the 'click - 5s' time resolves to a time after the begin time.

             </Paragraph>

             <Paragraph>

                 On the fifth row, the rectangle's end condition is accessKey based

                 and requires a user to press the 'a' key. The behavior is exactly the

                 same as for the previous row, except that the triggering event

                 is the 'a' key press.

             </Paragraph>

             <Paragraph>

                 The last row's rectangle has a end condition with two offset values

                 (1s;4s) and should behave like the rectangles of the first three

                 rows for the first 5 seconds of the document's timeline. In addition,

                 the end condition has a click event base and thus, the rectangle

                 should immediately move to the left position if the user everytime the user

                 clicks clicks on the rectangle when it is on the right position.

                 Finally, the end condition also has an accessKey condition

                 for the 'b' character. Thus, the rectangle should move to the left

                 position every time the user presses the 'b' key and the rectangle is

                 on the right position.

             </Paragraph>

         </OperatorScript>

     </SVGTestCase>

     <title id="test-title">$RCSfile: animate-elem-63-t.svg,v $</title>


     <!--======================================================================-->

     <!--Content of Test Case follows...                  =====================-->

     <!--======================================================================-->

     <text id="revision" x="10" y="340" font-size="40" stroke="none" fill="black">$Revision: 1.6 $</text>

     <rect id="test-frame" x="1" y="1" width="478" height="358" fill="none" stroke="#000"/>


     <text text-anchor="middle" x="240" y="30" font-size="20">multiple end</text>


     <g transform="translate(100, 100)">


         <g transform="translate(80,25)" text-anchor="end" font-size="14">

             <text>2 offsets</text>

             <text y="25">2 sync bases</text>

             <text y="50">2 repeat</text>


             <text y="100">2 event base</text>

             <text y="125">2 accessKeys</text>


             <text y="150">misc</text>

         </g>


         <g id="timeMarkersText" transform="translate(150, 5)" text-anchor="middle" font-size="14">

             <text>0-1s</text>

             <text y="-20">2s-4s</text>

             <text y="-40">&gt; 5s</text>


             <g transform="translate(40,0)">

                 <text>1-2s</text>

                 <text y="-20">4-5s</text>

             </g>

         </g>


         <g transform="translate(150,20)" stroke="black">

             <defs>

                 <rect id="shadow" x="-6" y="-6" width="12" height="12" fill="#ccc" stroke="black" stroke-width="1"/>

             </defs>


             <g id="setOne">

                 <use xlink:href="#shadow" x="0"/>

                 <use xlink:href="#shadow" x="40"/>


                 <rect x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

                     <set id="firstSet" attributeName="x" to="34" begin="1s; 4s" end="2s; 5s" dur="indefinite"/>

                 </rect>

             </g>


             <g id="setTwo" transform="translate(0, 25)">

                 <set id="syncBase" attributeName="display" to="inline" begin="0s" dur="indefinite"/>


                 <use xlink:href="#shadow" x="0"/>

                 <use xlink:href="#shadow" x="40"/>


                 <rect x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

                     <set attributeName="x" to="34" begin="1s; 4s" end="syncBase.begin+2s;syncBase.begin + 5s" dur="indefinite"/>

                 </rect>

             </g>


             <g id="setThree" transform="translate(0, 50)">

                 <set id="repeatBase" attributeName="display" to="inline" begin="0s" dur="1s" repeatDur="indefinite"/>


                 <use xlink:href="#shadow" x="0"/>

                 <use xlink:href="#shadow" x="40"/>


                 <rect x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

                     <set attributeName="x" to="34" begin="1s; 4s" end="repeatBase.repeat(2);repeatBase.repeat(5)" dur="indefinite"/>

                 </rect>

             </g>


             <g id="setFour" transform="translate(0, 100)">

                 <use xlink:href="#shadow" x="0"/>

                 <use xlink:href="#shadow" x="40"/>


                 <rect id="setFourTarget" x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

                     <set attributeName="x" to="34" begin="0s" end="setFourTarget.click -5s; setFourTarget.click + 5s" dur="indefinite"/>

                 </rect>

             </g>


             <g id="setFive" transform="translate(0, 125)">

                 <use xlink:href="#shadow" x="0"/>

                 <use xlink:href="#shadow" x="40"/>


                 <rect id="setFiveTarget" x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

                     <set attributeName="x" to="34" begin="0s" end="accessKey(a) - 5s;accessKey(a)+5s" dur="indefinite"/>

                 </rect>

             </g>


             <g id="setSix" transform="translate(0, 150)">

                 <use xlink:href="#shadow" x="0"/>

                 <use xlink:href="#shadow" x="40"/>


                 <rect id="setSixTarget" x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

                     <set attributeName="x" to="34" begin="1s;4s" end="2s;5s;setSixTarget.click;accessKey(b)" dur="indefinite"/>

                 </rect>

             </g>

         </g>

     </g>

   <script>
     // Pause the animation at t=0.
     document.documentElement.pauseAnimations();
   </script>
 </svg>
	<?xml version="1.0" encoding="UTF-8"?>
	<!--======================================================================-->
	<!--= Copyright 2004 World Wide Web Consortium, (Massachusetts =-->
	<!--= Institute of Technology, Institut National de Recherche en =-->
	<!--= Informatique et en Automatique, Keio University). All Rights =-->
	<!--= Reserved. See http://www.w3.org/Consortium/Legal/. =-->
	<!--======================================================================--><!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.1 Tiny//EN" "http://www.w3.org/Graphics/SVG/1.1/DTD/svg11-tiny.dtd">

	<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" version="1.1" baseProfile="tiny" id="svg-root" width="100%" height="100%" viewBox="0 0 480 360">

	<SVGTestCase xmlns:testcase="http://www.w3.org/2000/02/svg/testsuite/description/" xmlns="http://www.w3.org/2000/02/svg/testsuite/description/" reviewer="CN" owner="VH" desc="Test multiple on multiple end conditions in the end attribute" status="accepted" version="$Revision: 1.6 $" testname="$RCSfile: animate-elem-63-t.svg,v $">

	<OperatorScript>

	<Paragraph>

	This tests validates multiple end conditions in the end attribute,

	assuming support for the <set> element and setting the

	dur attribute to 'indefinite'.

	</Paragraph>

	<Paragraph>

	The test validates the various possibilities for the end attribute

	value: multiple offset values, multiple event base values, multiple sync base

	values, multiple repeat values, and multiple accessKey values. Finally,

	the test validates that end values of different kinds can be mixed.

	</Paragraph>



	<Paragraph>

	The test shows 6 rows where a red rectangle's x attribute is animated

	with <set> elements.

	</Paragraph>



	<Paragraph>

	On the first three rows, the red rectangles should show on the left from

	0 to 1s. From 1 to 2s, the rectangles should show on the right. Then

	the rectangles should show on the left from 2 to 4s, then on the right

	again from 4 to 5s and come back to the left position and stay there

	after 5s.

	</Paragraph>

	<Paragraph>

	On the fourth row, the rectangle's end condition is event based

	and requires a user click. One of the end condition is defined

	to be 5 seconds prior to the click and one is defined to be 5

	seconds after the click. If the user clicks on the rectangle

	before 5 seconds (in document time), the red rectangle we move

	to the left position 5 seconds after the click (because the

	'click - 5s' end time resolves to a time prior to the begin

	time). If the user clicks after 5 seconds (in document time),

	then the red rectangle moves to the left position immediately because

	the 'click - 5s' time resolves to a time after the begin time.

	</Paragraph>

	<Paragraph>

	On the fifth row, the rectangle's end condition is accessKey based

	and requires a user to press the 'a' key. The behavior is exactly the

	same as for the previous row, except that the triggering event

	is the 'a' key press.

	</Paragraph>

	<Paragraph>

	The last row's rectangle has a end condition with two offset values

	(1s;4s) and should behave like the rectangles of the first three

	rows for the first 5 seconds of the document's timeline. In addition,

	the end condition has a click event base and thus, the rectangle

	should immediately move to the left position if the user everytime the user

	clicks clicks on the rectangle when it is on the right position.

	Finally, the end condition also has an accessKey condition

	for the 'b' character. Thus, the rectangle should move to the left

	position every time the user presses the 'b' key and the rectangle is

	on the right position.

	</Paragraph>

	</OperatorScript>

	</SVGTestCase>

	<title id="test-title">$RCSfile: animate-elem-63-t.svg,v $</title>



	<!--======================================================================-->

	<!--Content of Test Case follows... =====================-->

	<!--======================================================================-->

	<text id="revision" x="10" y="340" font-size="40" stroke="none" fill="black">$Revision: 1.6 $</text>

	<rect id="test-frame" x="1" y="1" width="478" height="358" fill="none" stroke="#000"/>



	<text text-anchor="middle" x="240" y="30" font-size="20">multiple end</text>



	<g transform="translate(100, 100)">



	<g transform="translate(80,25)" text-anchor="end" font-size="14">

	<text>2 offsets</text>

	<text y="25">2 sync bases</text>

	<text y="50">2 repeat</text>



	<text y="100">2 event base</text>

	<text y="125">2 accessKeys</text>



	<text y="150">misc</text>

	</g>



	<g id="timeMarkersText" transform="translate(150, 5)" text-anchor="middle" font-size="14">

	<text>0-1s</text>

	<text y="-20">2s-4s</text>

	<text y="-40">> 5s</text>



	<g transform="translate(40,0)">

	<text>1-2s</text>

	<text y="-20">4-5s</text>

	</g>

	</g>



	<g transform="translate(150,20)" stroke="black">

	<defs>

	<rect id="shadow" x="-6" y="-6" width="12" height="12" fill="#ccc" stroke="black" stroke-width="1"/>

	</defs>



	<g id="setOne">

	<use xlink:href="#shadow" x="0"/>

	<use xlink:href="#shadow" x="40"/>



	<rect x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

	<set id="firstSet" attributeName="x" to="34" begin="1s; 4s" end="2s; 5s" dur="indefinite"/>

	</rect>

	</g>



	<g id="setTwo" transform="translate(0, 25)">

	<set id="syncBase" attributeName="display" to="inline" begin="0s" dur="indefinite"/>



	<use xlink:href="#shadow" x="0"/>

	<use xlink:href="#shadow" x="40"/>



	<rect x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

	<set attributeName="x" to="34" begin="1s; 4s" end="syncBase.begin+2s;syncBase.begin + 5s" dur="indefinite"/>

	</rect>

	</g>



	<g id="setThree" transform="translate(0, 50)">

	<set id="repeatBase" attributeName="display" to="inline" begin="0s" dur="1s" repeatDur="indefinite"/>



	<use xlink:href="#shadow" x="0"/>

	<use xlink:href="#shadow" x="40"/>



	<rect x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

	<set attributeName="x" to="34" begin="1s; 4s" end="repeatBase.repeat(2);repeatBase.repeat(5)" dur="indefinite"/>

	</rect>

	</g>



	<g id="setFour" transform="translate(0, 100)">

	<use xlink:href="#shadow" x="0"/>

	<use xlink:href="#shadow" x="40"/>



	<rect id="setFourTarget" x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

	<set attributeName="x" to="34" begin="0s" end="setFourTarget.click -5s; setFourTarget.click + 5s" dur="indefinite"/>

	</rect>

	</g>



	<g id="setFive" transform="translate(0, 125)">

	<use xlink:href="#shadow" x="0"/>

	<use xlink:href="#shadow" x="40"/>



	<rect id="setFiveTarget" x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

	<set attributeName="x" to="34" begin="0s" end="accessKey(a) - 5s;accessKey(a)+5s" dur="indefinite"/>

	</rect>

	</g>



	<g id="setSix" transform="translate(0, 150)">

	<use xlink:href="#shadow" x="0"/>

	<use xlink:href="#shadow" x="40"/>



	<rect id="setSixTarget" x="-6" y="-6" width="12" height="12" fill="rgb(204,0,102)">

	<set attributeName="x" to="34" begin="1s;4s" end="2s;5s;setSixTarget.click;accessKey(b)" dur="indefinite"/>

	</rect>

	</g>

	</g>

	</g>

	<script>
	// Pause the animation at t=0.
	document.documentElement.pauseAnimations();
	</script>
	</svg>