Oilpan is a garbage collection system for Blink objects. This document explains the design of the GC. If you're just interested in how to use Oilpan, see BlinkGCAPIReference.
Oilpan implements a mark-and-sweep GC. It features thread-local garbage collection with incremental marking and lazy sweeping. It can also do compaction for a subset of objects (collection backings).
Oilpan creates a different heap and root set for each thread. This allows Oilpan to run garbage collection in parallel with mutators running in other threads.
Any object or
Persistent that is allocated on a thread automatically belong to that thread‘s heap or root set. References to objects belonging to another thread’s heap, must use the
CrossThreadPersistent handle. This is even true for on-heap to on-heap references.
Assigning to a
CrossThreadPersistent requires a global lock, meaning it might block waiting for garbage collection to end on all other threads.
Threads that want to allocate Oilpan objects must be “attached” to Oilpan (typically through
As mentioned earlier, we have separate heaps for each thread. This
ThreadHeap is further partitioned into “Arenas”. The Arena for an object is chosen depending on a number of criteria.
Oilpan has three kinds of GCs.
Precise GC is triggered at the end of an event loop. At this point, it is guaranteed that there are no on-stack pointers pointing to Oilpan's heap. Oilpan can just trace from the
Persistent handles and collect all garbage precisely.
Conservative GC runs when we are under memory pressure, and a GC cannot wait until we go back to an event loop. In this case, the GC scans the native stack and treats the pointers discovered via the native stacks as part of the root set. (That's why raw pointers are used instead of handles on the native stack.)
Incremental GC is the most common type of GC. It splits the marking phase into small chunks and runs them between tasks. The smaller pause times help with reducing jank.
The marking phase consists of the following steps. The marking phase is executed in a stop-the-world manner.
Step 1. Mark all objects reachable from the root set by calling
Trace() methods defined on each object.
Step 2. Clear out all weak handles and run weak callbacks.
To prevent a use-after-free from happening, it is very important to make sure that Oilpan doesn‘t mis-trace any edge of the object graph. This means that all pointers except on-stack pointers must be wrapped with Oilpan’s handles (i.e., Persistent<>, Member<>, WeakMember<> etc). Raw pointers to on-heap objects have a risk of creating an edge Oilpan cannot understand and causing a use-after-free. Raw pointers shall not be used to reference on-heap objects (except raw pointers on native stacks). Exceptions can be made if the target object is guaranteed to be kept alive in other ways.
The sweeping phase consists of the following steps.
Step 1. Invoke pre-finalizers. At this point, no destructors have been invoked. Thus the pre-finalizers are allowed to touch any other on-heap objects (which may get destructed in this sweeping phase).
Step 2. The thread resumes mutator's execution. (A mutator means user code.)
Step 3. As the mutator allocates new objects, lazy sweeping invokes destructors of the remaining dead objects incrementally.
There is no guarantee of the order in which the destructors are invoked. That's why destructors must not touch any other on-heap objects (which might have already been destructed). If some destructor unavoidably needs to touch other on-heap objects, it will have to be converted to a pre-finalizer. The pre-finalizer is allowed to touch other on-heap objects.
The mutator is resumed before all the destructors has run. For example, imagine a case where X is a client of Y, and Y holds a list of clients. If the code relies on X‘s destructor removing X from the list, there is a risk that Y iterates the list and calls some method of X which may touch other on-heap objects. This causes a use-after-free. Care must be taken to make sure that X is explicitly removed from the list before the mutator resumes its execution in a way that doesn’t rely on X's destructor.
Either way, the most important thing is that there is no guarantee of when destructors run. Assumptions should not be made about the order and the timing of their execution. (In general, it's dangerous to do something complicated in a destructor.)
Notes (The followings are features that shall be reserved for unusual destruction requirements):
Weak processing runs only when the holder object of the WeakMember outlives the pointed object. If the holder object and the pointed object die at the same time, the weak processing doesn't run. It is wrong to write code assuming that the weak processing always runs.
Pre-finalizers are heavy because the thread needs to scan all pre-finalizers at each sweeping phase to determine which pre-finalizers to be invoked (the thread needs to invoke pre-finalizers of dead objects). Adding pre-finalizers to frequently created objects should be avoided.