The adb executable exists within the Android SDK:
In order to allow the ADB to connect to the device, you must enable USB debugging:
You must ensure that the screen stays on while testing:
adb shell svc power stayon usb Or do this manually on the device: Settings -> Developer options -> Stay Awake.
If this option is greyed out, stay awake is probably disabled by policy. In that case, get another device or log in with a normal, unmanaged account (because the tests will break in exciting ways if stay awake is off).
You may see a dialog like this one, which states, Google may regularly check installed apps for potentially harmful behavior. This can interfere with the test runner. To disable this dialog, run:
adb shell settings put global package_verifier_enable 0
Running tests on emulators is the same as on device. Refer to android_emulator.md for setting up emulators.
If you‘re adding a new test file, you’ll need to explicitly add it to a gn target. If you‘re adding a test to an existing file, you won’t need to make gn changes, but you may be interested in where your test winds up. In either case, here are some guidelines for where a test belongs:
C++ test files typically belong in
<top-level directory>_unittests (e.g.
//base). There are a few exceptions -- browser tests are typically their own target (e.g.
//chrome), and some unit test suites are broken at the second directory rather than the top-level one.
Java test files vary a bit more widely than their C++ counterparts:
<top-level directory>_test_java. Regardless, they'll wind up getting packaged into one of a few test APKs:
webview_instrumentation_test_apkfor anything in
content_shell_test_apkfor anything in
chrome_public_test_apkfor most things in
//base), though here again there are cases (particularly in
//components) where suites are split at the second directory rather than the top-level one.
Once you know what to build, just do it like you normally would build anything else, e.g.:
ninja -C out/Release chrome_public_test_apk
All functional tests should be runnable via the wrapper scripts generated at build time:
<output directory>/bin/run_<target_name> [options]
Note that tests are sharded across all attached devices unless explicitly told to do otherwise by
The commands used by the buildbots are printed in the logs. Look at https://build.chromium.org/ to duplicate the same test command as a particular builder.
If you see this error when the test runner is attempting to deploy the test binaries to the AVD emulator, you may need to resize your userdata partition with the following commands:
# Resize userdata partition to be 1G resize2fs android_emulator_sdk/sdk/system-images/android-25/x86/userdata.img 1G # Set filesystem parameter to continue on errors; Android doesn't like some # things e2fsprogs does. tune2fs -e continue android_emulator_sdk/sdk/system-images/android-25/x86/userdata.img
Crash stacks are logged and can be viewed using
adb logcat. To symbolize the traces, define
$OUTDIR is the argument you pass to
ninja -C, and pipe the output through
$CHROMIUM_OUTPUT_DIR is unset, the script will search
out/Release. For example:
# If you build with ninja -C out/Debug chrome_public_test_apk # You can run: adb logcat -d | third_party/android_platform/development/scripts/stack # If you build with ninja -C out/android chrome_public_test_apk # You can run: adb logcat -d | CHROMIUM_OUTPUT_DIR=out/android third_party/android_platform/development/scripts/stack # or export CHROMIUM_OUTPUT_DIR=out/android adb logcat -d | third_party/android_platform/development/scripts/stack
JUnit tests are Java unittests running on the host instead of the target device. They are faster to run and therefore are recommended over instrumentation tests when possible.
The JUnits tests are usually following the pattern of target_junit_tests, for example,
When adding a new JUnit test, the associated
BUILD.gn file must be updated. For example, adding a test to
chrome_junit_tests requires to update
# Build the test suite. ninja -C out/Default chrome_junit_tests # Run the test suite. out/Default/run_chrome_junit_tests # Run a subset of tests. You might need to pass the package name for some tests. out/Default/run_chrome_junit_tests -f "org.chromium.chrome.browser.media.*"
Similar to debugging apk targets:
out/Default/bin/run_chrome_junit_tests --wait-for-java-debugger out/Default/bin/run_chrome_junit_tests --wait-for-java-debugger # Specify custom port via --debug-socket=9999
# Build a test suite ninja -C out/Release content_unittests # Run a test suite out/Release/bin/run_content_unittests [-vv] # Run a subset of tests out/Release/bin/run_content_unittests [-vv] --gtest-filter ByteStreamTest.*
In order to run instrumentation tests, you must leave your device screen ON and UNLOCKED. Otherwise, the test will timeout trying to launch an intent. Optionally you can disable screen lock under Settings -> Security -> Screen Lock -> None.
Next, you need to build the app, build your tests, and then run your tests (which will install the APK under test and the test APK automatically).
# Build the code under test ninja -C out/Release content_shell_apk # Build the tests themselves ninja -C out/Release content_shell_test_apk # Run the test (will automagically install the APK under test and the test APK) out/Release/bin/run_content_shell_test_apk [-vv]
# Build the code under test ninja -C out/Release chrome_public_apk # Build the tests themselves ninja -C out/Release chrome_public_test_apk # Run the test (will automagically install the APK under test and the test APK) out/Release/bin/run_chrome_public_test_apk [-vv]
ninja -C out/Release webview_instrumentation_apk ninja -C out/Release webview_instrumentation_test_apk out/Release/bin/run_webview_instrumentation_test_apk [-vv]
In order to run a subset of tests, use -f to filter based on test class/method or -A/-E to filter using annotations.
# Run a test suite out/Debug/bin/run_content_shell_test_apk # Run a specific test class out/Debug/bin/run_content_shell_test_apk -f AddressDetectionTest.* # Run a specific test method out/Debug/bin/run_content_shell_test_apk -f \ AddressDetectionTest#testAddressLimits # Run a subset of tests by size (Smoke, SmallTest, MediumTest, LargeTest, # EnormousTest) out/Debug/bin/run_content_shell_test_apk -A Smoke # Run a subset of tests by annotation, such as filtering by Feature out/Debug/bin/run_content_shell_test_apk -A Feature=Navigation
You might want to add stars
* to each as a regular expression, e.g.
Similar to debugging apk targets:
If running with
is_debug=false, Java stacks from logcat need to be fixed up:
out/Release/bin/java_deobfuscate out/Release/apks/ChromePublicTest.apk.mapping < stacktrace.txt
Any stacks produced by test runner output will already be deobfuscated.
See Web Tests.
(e.g. the “Android Debug (Nexus 7)” bot on the chromium.gpu waterfall)
See https://www.chromium.org/developers/testing/gpu-testing for details. Use
--browser=android-content-shell. Examine the stdio from the test invocation on the bots to see arguments to pass to