blob: d006d282bcc71b7162dcd7084f264703c871104e [file] [log] [blame]
/* Copyright (c) 2012 The Chromium Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/**
* This file defines the <code>PPB_WebSocket</code> interface providing
* bi-directional, full-duplex, communications over a single TCP socket.
*/
[generate_thunk]
label Chrome {
M18 = 1.0
};
/**
* This enumeration contains the types representing the WebSocket ready state
* and these states are based on the JavaScript WebSocket API specification.
* GetReadyState() returns one of these states.
*/
[assert_size(4)]
enum PP_WebSocketReadyState {
/**
* Ready state is queried on an invalid resource.
*/
PP_WEBSOCKETREADYSTATE_INVALID = -1,
/**
* Ready state that the connection has not yet been established.
*/
PP_WEBSOCKETREADYSTATE_CONNECTING = 0,
/**
* Ready state that the WebSocket connection is established and communication
* is possible.
*/
PP_WEBSOCKETREADYSTATE_OPEN = 1,
/**
* Ready state that the connection is going through the closing handshake.
*/
PP_WEBSOCKETREADYSTATE_CLOSING = 2,
/**
* Ready state that the connection has been closed or could not be opened.
*/
PP_WEBSOCKETREADYSTATE_CLOSED = 3
};
/**
* This enumeration contains status codes. These codes are used in Close() and
* GetCloseCode(). Refer to RFC 6455, The WebSocket Protocol, for further
* information.
* <code>PP_WEBSOCKETSTATUSCODE_NORMAL_CLOSURE</code> and codes in the range
* <code>PP_WEBSOCKETSTATUSCODE_USER_REGISTERED_MIN</code> to
* <code>PP_WEBSOCKETSTATUSCODE_USER_REGISTERED_MAX</code>, and
* <code>PP_WEBSOCKETSTATUSCODE_USER_PRIVATE_MIN</code> to
* <code>PP_WEBSOCKETSTATUSCODE_USER_PRIVATE_MAX</code> are valid for Close().
*/
[assert_size(4)]
enum PP_WebSocketCloseCode {
/**
* Indicates to request closing connection without status code and reason.
*
* (Note that the code 1005 is forbidden to send in actual close frames by
* the RFC. PP_WebSocket reuses this code internally and the code will never
* appear in the actual close frames.)
*/
PP_WEBSOCKETSTATUSCODE_NOT_SPECIFIED = 1005,
/**
* Status codes in the range 0-999 are not used.
*/
/**
* Indicates a normal closure.
*/
PP_WEBSOCKETSTATUSCODE_NORMAL_CLOSURE = 1000,
/**
* Indicates that an endpoint is "going away", such as a server going down.
*/
PP_WEBSOCKETSTATUSCODE_GOING_AWAY = 1001,
/**
* Indicates that an endpoint is terminating the connection due to a protocol
* error.
*/
PP_WEBSOCKETSTATUSCODE_PROTOCOL_ERROR = 1002,
/**
* Indicates that an endpoint is terminating the connection because it has
* received a type of data it cannot accept.
*/
PP_WEBSOCKETSTATUSCODE_UNSUPPORTED_DATA = 1003,
/**
* Status code 1004 is reserved.
*/
/**
* Pseudo code to indicate that receiving close frame doesn't contain any
* status code.
*/
PP_WEBSOCKETSTATUSCODE_NO_STATUS_RECEIVED = 1005,
/**
* Pseudo code to indicate that connection was closed abnormally, e.g.,
* without closing handshake.
*/
PP_WEBSOCKETSTATUSCODE_ABNORMAL_CLOSURE = 1006,
/**
* Indicates that an endpoint is terminating the connection because it has
* received data within a message that was not consistent with the type of
* the message (e.g., non-UTF-8 data within a text message).
*/
PP_WEBSOCKETSTATUSCODE_INVALID_FRAME_PAYLOAD_DATA = 1007,
/**
* Indicates that an endpoint is terminating the connection because it has
* received a message that violates its policy.
*/
PP_WEBSOCKETSTATUSCODE_POLICY_VIOLATION = 1008,
/**
* Indicates that an endpoint is terminating the connection because it has
* received a message that is too big for it to process.
*/
PP_WEBSOCKETSTATUSCODE_MESSAGE_TOO_BIG = 1009,
/**
* Indicates that an endpoint (client) is terminating the connection because
* it has expected the server to negotiate one or more extension, but the
* server didn't return them in the response message of the WebSocket
* handshake.
*/
PP_WEBSOCKETSTATUSCODE_MANDATORY_EXTENSION = 1010,
/**
* Indicates that a server is terminating the connection because it
* encountered an unexpected condition.
*/
PP_WEBSOCKETSTATUSCODE_INTERNAL_SERVER_ERROR = 1011,
/**
* Status codes in the range 1012-1014 are reserved.
*/
/**
* Pseudo code to indicate that the connection was closed due to a failure to
* perform a TLS handshake.
*/
PP_WEBSOCKETSTATUSCODE_TLS_HANDSHAKE = 1015,
/**
* Status codes in the range 1016-2999 are reserved.
*/
/**
* Status codes in the range 3000-3999 are reserved for use by libraries,
* frameworks, and applications. These codes are registered directly with
* IANA.
*/
PP_WEBSOCKETSTATUSCODE_USER_REGISTERED_MIN = 3000,
PP_WEBSOCKETSTATUSCODE_USER_REGISTERED_MAX = 3999,
/**
* Status codes in the range 4000-4999 are reserved for private use.
* Application can use these codes for application specific purposes freely.
*/
PP_WEBSOCKETSTATUSCODE_USER_PRIVATE_MIN = 4000,
PP_WEBSOCKETSTATUSCODE_USER_PRIVATE_MAX = 4999
};
/**
* The <code>PPB_WebSocket</code> interface provides bi-directional,
* full-duplex, communications over a single TCP socket.
*/
interface PPB_WebSocket {
/**
* Create() creates a WebSocket instance.
*
* @param[in] instance A <code>PP_Instance</code> identifying the instance
* with the WebSocket.
*
* @return A <code>PP_Resource</code> corresponding to a WebSocket if
* successful.
*/
PP_Resource Create([in] PP_Instance instance);
/**
* IsWebSocket() determines if the provided <code>resource</code> is a
* WebSocket instance.
*
* @param[in] resource A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @return Returns <code>PP_TRUE</code> if <code>resource</code> is a
* <code>PPB_WebSocket</code>, <code>PP_FALSE</code> if the
* <code>resource</code> is invalid or some type other than
* <code>PPB_WebSocket</code>.
*/
PP_Bool IsWebSocket([in] PP_Resource resource);
/**
* Connect() connects to the specified WebSocket server. You can call this
* function once for a <code>web_socket</code>.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @param[in] url A <code>PP_Var</code> representing a WebSocket server URL.
* The <code>PP_VarType</code> must be <code>PP_VARTYPE_STRING</code>.
*
* @param[in] protocols A pointer to an array of <code>PP_Var</code>
* specifying sub-protocols. Each <code>PP_Var</code> represents one
* sub-protocol and its <code>PP_VarType</code> must be
* <code>PP_VARTYPE_STRING</code>. This argument can be null only if
* <code>protocol_count</code> is 0.
*
* @param[in] protocol_count The number of sub-protocols in
* <code>protocols</code>.
*
* @param[in] callback A <code>PP_CompletionCallback</code> called
* when a connection is established or an error occurs in establishing
* connection.
*
* @return An int32_t containing an error code from <code>pp_errors.h</code>.
* Returns <code>PP_ERROR_BADARGUMENT</code> if the specified
* <code>url</code>, or <code>protocols</code> contain an invalid string as
* defined in the WebSocket API specification.
* <code>PP_ERROR_BADARGUMENT</code> corresponds to a SyntaxError in the
* WebSocket API specification.
* Returns <code>PP_ERROR_NOACCESS</code> if the protocol specified in the
* <code>url</code> is not a secure protocol, but the origin of the caller
* has a secure scheme. Also returns <code>PP_ERROR_NOACCESS</code> if the
* port specified in the <code>url</code> is a port that the user agent
* is configured to block access to because it is a well-known port like
* SMTP. <code>PP_ERROR_NOACCESS</code> corresponds to a SecurityError of the
* specification.
* Returns <code>PP_ERROR_INPROGRESS</code> if this is not the first call to
* Connect().
*/
[report_errors=False]
int32_t Connect([in] PP_Resource web_socket,
[in] PP_Var url,
[in, size_as=protocol_count] PP_Var[] protocols,
[in] uint32_t protocol_count,
[in] PP_CompletionCallback callback);
/**
* Close() closes the specified WebSocket connection by specifying
* <code>code</code> and <code>reason</code>.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @param[in] code The WebSocket close code. This is ignored if it is
* <code>PP_WEBSOCKETSTATUSCODE_NOT_SPECIFIED</code>.
* <code>PP_WEBSOCKETSTATUSCODE_NORMAL_CLOSURE</code> must be used for the
* usual case. To indicate some specific error cases, codes in the range
* <code>PP_WEBSOCKETSTATUSCODE_USER_REGISTERED_MIN</code> to
* <code>PP_WEBSOCKETSTATUSCODE_USER_REGISTERED_MAX</code>, and in the range
* <code>PP_WEBSOCKETSTATUSCODE_USER_PRIVATE_MIN</code> to
* <code>PP_WEBSOCKETSTATUSCODE_USER_PRIVATE_MAX</code> are available.
*
* @param[in] reason A <code>PP_Var</code> representing the WebSocket
* close reason. This is ignored if it is <code>PP_VARTYPE_UNDEFINED</code>.
* Otherwise, its <code>PP_VarType</code> must be
* <code>PP_VARTYPE_STRING</code>.
*
* @param[in] callback A <code>PP_CompletionCallback</code> called
* when the connection is closed or an error occurs in closing the
* connection.
*
* @return An int32_t containing an error code from <code>pp_errors.h</code>.
* Returns <code>PP_ERROR_BADARGUMENT</code> if <code>reason</code> contains
* an invalid character as a UTF-8 string, or is longer than 123 bytes.
* <code>PP_ERROR_BADARGUMENT</code> corresponds to a JavaScript SyntaxError
* in the WebSocket API specification.
* Returns <code>PP_ERROR_NOACCESS</code> if the code is not an integer
* equal to 1000 or in the range 3000 to 4999. <code>PP_ERROR_NOACCESS</code>
* corresponds to an InvalidAccessError in the WebSocket API specification.
* Returns <code>PP_ERROR_INPROGRESS</code> if a previous call to Close() is
* not finished.
*/
[report_errors=False]
int32_t Close([in] PP_Resource web_socket,
[in] uint16_t code,
[in] PP_Var reason,
[in] PP_CompletionCallback callback);
/**
* ReceiveMessage() receives a message from the WebSocket server.
* This interface only returns a single message. That is, this interface must
* be called at least N times to receive N messages, no matter the size of
* each message.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @param[out] message The received message is copied to provided
* <code>message</code>. The <code>message</code> must remain valid until
* ReceiveMessage() completes. Its received <code>PP_VarType</code> will be
* <code>PP_VARTYPE_STRING</code> or <code>PP_VARTYPE_ARRAY_BUFFER</code>.
*
* @param[in] callback A <code>PP_CompletionCallback</code> called
* when ReceiveMessage() completes. This callback is ignored if
* ReceiveMessage() completes synchronously and returns <code>PP_OK</code>.
*
* @return An int32_t containing an error code from <code>pp_errors.h</code>.
* If an error is detected or connection is closed, ReceiveMessage() returns
* <code>PP_ERROR_FAILED</code> after all buffered messages are received.
* Until buffered message become empty, ReceiveMessage() continues to return
* <code>PP_OK</code> as if connection is still established without errors.
*/
[report_errors=False]
int32_t ReceiveMessage([in] PP_Resource web_socket,
[out] PP_Var message,
[in] PP_CompletionCallback callback);
/**
* SendMessage() sends a message to the WebSocket server.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @param[in] message A message to send. The message is copied to an internal
* buffer, so the caller can free <code>message</code> safely after returning
* from the function. Its sent <code>PP_VarType</code> must be
* <code>PP_VARTYPE_STRING</code> or <code>PP_VARTYPE_ARRAY_BUFFER</code>.
*
* @return An int32_t containing an error code from <code>pp_errors.h</code>.
* Returns <code>PP_ERROR_FAILED</code> if the ReadyState is
* <code>PP_WEBSOCKETREADYSTATE_CONNECTING</code>.
* <code>PP_ERROR_FAILED</code> corresponds to a JavaScript
* InvalidStateError in the WebSocket API specification.
* Returns <code>PP_ERROR_BADARGUMENT</code> if the provided
* <code>message</code> contains an invalid character as a UTF-8 string.
* <code>PP_ERROR_BADARGUMENT</code> corresponds to a JavaScript
* SyntaxError in the WebSocket API specification.
* Otherwise, returns <code>PP_OK</code>, which doesn't necessarily mean
* that the server received the message.
*/
[report_errors=False]
int32_t SendMessage([in] PP_Resource web_socket,
[in] PP_Var message);
/**
* GetBufferedAmount() returns the number of bytes of text and binary
* messages that have been queued for the WebSocket connection to send, but
* have not been transmitted to the network yet.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @return Returns the number of bytes.
*/
[report_errors=False]
uint64_t GetBufferedAmount([in] PP_Resource web_socket);
/**
* GetCloseCode() returns the connection close code for the WebSocket
* connection.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @return Returns 0 if called before the close code is set.
*/
[report_errors=False]
uint16_t GetCloseCode([in] PP_Resource web_socket);
/**
* GetCloseReason() returns the connection close reason for the WebSocket
* connection.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @return Returns a <code>PP_VARTYPE_STRING</code> var. If called before the
* close reason is set, the return value contains an empty string. Returns a
* <code>PP_VARTYPE_UNDEFINED</code> if called on an invalid resource.
*/
[report_errors=False]
PP_Var GetCloseReason([in] PP_Resource web_socket);
/**
* GetCloseWasClean() returns if the connection was closed cleanly for the
* specified WebSocket connection.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @return Returns <code>PP_FALSE</code> if called before the connection is
* closed, called on an invalid resource, or closed for abnormal reasons.
* Otherwise, returns <code>PP_TRUE</code> if the connection was closed
* cleanly.
*/
[report_errors=False]
PP_Bool GetCloseWasClean([in] PP_Resource web_socket);
/**
* GetExtensions() returns the extensions selected by the server for the
* specified WebSocket connection.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @return Returns a <code>PP_VARTYPE_STRING</code> var. If called before the
* connection is established, the var's data is an empty string. Returns a
* <code>PP_VARTYPE_UNDEFINED</code> if called on an invalid resource.
*/
[report_errors=False]
PP_Var GetExtensions([in] PP_Resource web_socket);
/**
* GetProtocol() returns the sub-protocol chosen by the server for the
* specified WebSocket connection.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @return Returns a <code>PP_VARTYPE_STRING</code> var. If called before the
* connection is established, the var contains the empty string. Returns a
* <code>PP_VARTYPE_UNDEFINED</code> if called on an invalid resource.
*/
[report_errors=False]
PP_Var GetProtocol([in] PP_Resource web_socket);
/**
* GetReadyState() returns the ready state of the specified WebSocket
* connection.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @return Returns <code>PP_WEBSOCKETREADYSTATE_INVALID</code> if called
* before Connect() is called, or if this function is called on an
* invalid resource.
*/
[on_failure=PP_WEBSOCKETREADYSTATE_INVALID, report_errors=False]
PP_WebSocketReadyState GetReadyState([in] PP_Resource web_socket);
/**
* GetURL() returns the URL associated with specified WebSocket connection.
*
* @param[in] web_socket A <code>PP_Resource</code> corresponding to a
* WebSocket.
*
* @return Returns a <code>PP_VARTYPE_STRING</code> var. If called before the
* connection is established, the var contains the empty string. Returns a
* <code>PP_VARTYPE_UNDEFINED</code> if this function is called on an
* invalid resource.
*/
[report_errors=False]
PP_Var GetURL([in] PP_Resource web_socket);
};