Layout Tests

Layout tests are used by Blink to test many components, including but not limited to layout and rendering. In general, layout tests involve loading pages in a test renderer (content_shell) and comparing the rendered output or JavaScript output against an expected output file.

This document covers running and debugging existing layout tests. See the Writing Layout Tests documentation if you find yourself writing layout tests.

Running Layout Tests

Initial Setup

Before you can run the layout tests, you need to build the blink_tests target to get content_shell and all of the other needed binaries.

ninja -C out/Release blink_tests

On Android (layout test support currently limited to KitKat and earlier) you need to build and install content_shell_apk instead. See also: Android Build Instructions.

ninja -C out/Default content_shell_apk
adb install -r out/Default/apks/ContentShell.apk

On Mac, you probably want to strip the content_shell binary before starting the tests. If you don‘t, you’ll have 5-10 running concurrently, all stuck being examined by the OS crash reporter. This may cause other failures like timeouts where they normally don't occur.

strip ./xcodebuild/{Debug,Release}/

Running the Tests

TODO: mention testing/

The test runner script is in third_party/WebKit/Tools/Scripts/run-webkit-tests.

To specify which build directory to use (e.g. out/Default, out/Release, out/Debug) you should pass the -t or --target parameter. For example, to use the build in out/Default, use:

python third_party/WebKit/Tools/Scripts/run-webkit-tests -t Default

For Android (if your build directory is out/android):

python third_party/WebKit/Tools/Scripts/run-webkit-tests -t android --android

Tests marked as [ Skip ] in TestExpectations won't be run at all, generally because they cause some intractable tool error. To force one of them to be run, either rename that file or specify the skipped test as the only one on the command line (see below). Read the Layout Test Expectations documentation to learn more about TestExpectations and related files.

Currently only the tests listed in SmokeTests are run on the Android bots, since running all layout tests takes too long on Android (and may still have some infrastructure issues). Most developers focus their Blink testing on Linux. We rely on the fact that the Linux and Android behavior is nearly identical for scenarios outside those covered by the smoke tests.

To run only some of the tests, specify their directories or filenames as arguments to relative to the layout test directory (src/third_party/WebKit/LayoutTests). For example, to run the fast form tests, use:

Tools/Scripts/run-webkit-tests fast/forms

Or you could use the following shorthand:

Tools/Scripts/run-webkit-tests fast/fo\*

Example: To run the layout tests with a debug build of content_shell, but only test the SVG tests and run pixel tests, you would run:

Tools/Scripts/run-webkit-tests -t Default svg

As a final quick-but-less-robust alternative, you can also just use the content_shell executable to run specific tests by using (for Windows):

out/Default/content_shell.exe --run-layout-test --no-sandbox full_test_source_path

as in:

out/Default/content_shell.exe --run-layout-test --no-sandbox \

but this requires a manual diff against expected results, because the shell doesn't do it for you.

To see a complete list of arguments supported, run: run-webkit-tests --help

Linux Note: We try to match the Windows render tree output exactly by matching font metrics and widget metrics. If there's a difference in the render tree output, we should see if we can avoid rebaselining by improving our font metrics. For additional information on Linux Layout Tests, please see docs/
Mac Note: While the tests are running, a bunch of Appearance settings are overridden for you so the right type of scroll bars, colors, etc. are used. Your main display‘s “Color Profile” is also changed to make sure color correction by ColorSync matches what is expected in the pixel tests. The change is noticeable, how much depends on the normal level of correction for your display. The tests do their best to restore your setting when done, but if you’re left in the wrong state, you can manually reset it by going to System Preferences → Displays → Color and selecting the “right” value.

Test Harness Options

This script has a lot of command line flags. You can pass --help to the script to see a full list of options. A few of the most useful options are below:

--debugRun the debug build of the test shell (default is release). Equivalent to -t Debug
--nocheck-sys-depsDon't check system dependencies; this allows faster iteration.
--verboseProduce more verbose output, including a list of tests that pass.
--no-pixel-testsDisable the pixel-to-pixel PNG comparisons and image checksums for tests that don't call testRunner.dumpAsText()
--reset-resultsOverwrite the current baselines (`-expected.{png
--renderer-startup-dialogBring up a modal dialog before running the test, useful for attaching a debugger.
--fully-parallelRun tests in parallel using as many child processes as the system has cores.
--driver-loggingPrint C++ logs (LOG(WARNING), etc).

Success and Failure

A test succeeds when its output matches the pre-defined expected results. If any tests fail, the test script will place the actual generated results, along with a diff of the actual and expected results, into src/out/Default/layout_test_results/, and by default launch a browser with a summary and link to the results/diffs.

The expected results for tests are in the src/third_party/WebKit/LayoutTests/platform or alongside their respective tests.

Tests which use testharness.js do not have expected result files if all test cases pass.

A test that runs but produces the wrong output is marked as “failed”, one that causes the test shell to crash is marked as “crashed”, and one that takes longer than a certain amount of time to complete is aborted and marked as “timed out”. A row of dots in the script's output indicates one or more tests that passed.

Test expectations

The TestExpectations file (and related files) contains the list of all known layout test failures. See the Layout Test Expectations documentation for more on this.

Testing Runtime Flags

There are two ways to run layout tests with additional command-line arguments:

  • Using --additional-driver-flag:

    run-webkit-tests --additional-driver-flag=--blocking-repaint

    This tells the test harness to pass --blocking-repaint to the content_shell binary.

    It will also look for flag-specific expectations in LayoutTests/FlagExpectations/blocking-repaint, if this file exists. The suppressions in this file override the main TestExpectations file.

  • Using a virtual test suite defined in LayoutTests/VirtualTestSuites. A virtual test suite runs a subset of layout tests under a specific path with additional flags. For example, you could test a (hypothetical) new mode for repainting using the following virtual test suite:

      "prefix": "blocking_repaint",
      "base": "fast/repaint",
      "args": ["--blocking-repaint"],

    This will create new “virtual” tests of the form virtual/blocking_repaint/fast/repaint/... which correspond to the files under LayoutTests/fast/repaint and pass --blocking-repaint to content_shell when they are run.

    These virtual tests exist in addition to the original fast/repaint/... tests. They can have their own expectations in TestExpectations, and their own baselines. The test harness will use the non-virtual baselines as a fallback. However, the non-virtual expectations are not inherited: if fast/repaint/foo.html is marked [ Fail ], the test harness still expects virtual/blocking_repaint/fast/repaint/foo.html to pass. If you expect the virtual test to also fail, it needs its own suppression.

    The “prefix” value does not have to be unique. This is useful if you want to run multiple directories with the same flags (but see the notes below about performance). Using the same prefix for different sets of flags is not recommended.

For flags whose implementation is still in progress, virtual test suites and flag-specific expectations represent two alternative strategies for testing. Consider the following when choosing between them:

  • The waterfall builders and try bots will run all virtual test suites in addition to the non-virtual tests. Conversely, a flag-specific expectations file won't automatically cause the bots to test your flag - if you want bot coverage without virtual test suites, you will need to set up a dedicated bot for your flag.

  • Due to the above, virtual test suites incur a performance penalty for the commit queue and the continuous build infrastructure. This is exacerbated by the need to restart content_shell whenever flags change, which limits parallelism. Therefore, you should avoid adding large numbers of virtual test suites. They are well suited to running a subset of tests that are directly related to the feature, but they don't scale to flags that make deep architectural changes that potentially impact all of the tests.

Tracking Test Failures

All bugs, associated with layout test failures must have the Test-Layout label. Depending on how much you know about the bug, assign the status accordingly:

  • Unconfirmed -- You aren't sure if this is a simple rebaseline, possible duplicate of an existing bug, or a real failure
  • Untriaged -- Confirmed but unsure of priority or root cause.
  • Available -- You know the root cause of the issue.
  • Assigned or Started -- You will fix this issue.

When creating a new layout test bug, please set the following properties:

  • Components: a sub-component of Blink
  • OS: All (or whichever OS the failure is on)
  • Priority: 2 (1 if it's a crash)
  • Type: Bug
  • Labels: Test-Layout

You can also use the Layout Test Failure template, which will pre-set these labels for you.

Debugging Layout Tests

After the layout tests run, you should get a summary of tests that pass or fail. If something fails unexpectedly (a new regression), you will get a content_shell window with a summary of the unexpected failures. Or you might have a failing test in mind to investigate. In any case, here are some steps and tips for finding the problem.

  • Take a look at the result. Sometimes tests just need to be rebaselined (see below) to account for changes introduced in your patch.
    • Load the test into a trunk Chrome or content_shell build and look at its result. (For tests in the http/ directory, start the http server first. See above. Navigate to http://localhost:8000/ and proceed from there.) The best tests describe what they‘re looking for, but not all do, and sometimes things they’re not explicitly testing are still broken. Compare it to Safari, Firefox, and IE if necessary to see if it‘s correct. If you’re still not sure, find the person who knows the most about it and ask.
    • Some tests only work properly in content_shell, not Chrome, because they rely on extra APIs exposed there.
    • Some tests only work properly when they‘re run in the layout-test framework, not when they’re loaded into content_shell directly. The test should mention that in its visible text, but not all do. So try that too. See “Running the tests”, above.
  • If you think the test is correct, confirm your suspicion by looking at the diffs between the expected result and the actual one.
    • Make sure that the diffs reported aren't important. Small differences in spacing or box sizes are often unimportant, especially around fonts and form controls. Differences in wording of JS error messages are also usually acceptable.
    • ./ path/to/your/test.html --full-results-html will produce a page including links to the expected result, actual result, and diff.
    • Add the --sources option to to see exactly which expected result it's comparing to (a file next to the test, something in platform/mac/, something in platform/chromium-win/, etc.)
    • If you‘re still sure it’s correct, rebaseline the test (see below). Otherwise...
  • If you're lucky, your test is one that runs properly when you navigate to it in content_shell normally. In that case, build the Debug content_shell project, fire it up in your favorite debugger, and load the test file either from a file: URL.
    • You'll probably be starting and stopping the content_shell a lot. In VS, to save navigating to the test every time, you can set the URL to your test (file: or http:) as the command argument in the Debugging section of the content_shell project Properties.
    • If your test contains a JS call, DOM manipulation, or other distinctive piece of code that you think is failing, search for that in the Chrome solution. That's a good place to put a starting breakpoint to start tracking down the issue.
    • Otherwise, you're running in a standard message loop just like in Chrome. If you have no other information, set a breakpoint on page load.
  • If your test only works in full layout-test mode, or if you find it simpler to debug without all the overhead of an interactive session, start the content_shell with the command-line flag --run-layout-test, followed by the URL (file: or http:) to your test. More information about running layout tests in content_shell can be found here.
    • In VS, you can do this in the Debugging section of the content_shell project Properties.
    • Now you're running with exactly the same API, theme, and other setup that the layout tests use.
    • Again, if your test contains a JS call, DOM manipulation, or other distinctive piece of code that you think is failing, search for that in the Chrome solution. That's a good place to put a starting breakpoint to start tracking down the issue.
    • If you can't find any better place to set a breakpoint, start at the TestShell::RunFileTest() call in, or at shell->LoadURL() within RunFileTest() in
  • Debug as usual. Once you've gotten this far, the failing layout test is just a (hopefully) reduced test case that exposes a problem.

Debugging HTTP Tests

To run the server manually to reproduce/debug a failure:

cd src/third_party/WebKit/Tools/Scripts

The layout tests will be served from For example, to run the test LayoutTest/http/tests/serviceworker/chromium/service-worker-allowed.html, navigate to Some tests will behave differently if you go to vs localhost, so use

To kill the server, hit any key on the terminal where run-blink-httpd is running, or just use taskkill or the Task Manager on Windows, and killall or Activity Monitor on MacOS.

The test server sets up an alias to LayoutTests/resources directory. In HTTP tests, you can access testing framework at e.g. src="/js-test-resources/js-test.js".


Check to see how a test did in the most recent ~100 builds on each builder (as long as the page is being updated regularly).

A timeout will often also be a text mismatch, since the wrapper script kills the content_shell before it has a chance to finish. The exception is if the test finishes loading properly, but somehow hangs before it outputs the bit of text that tells the wrapper it's done.

Why might a test fail (or crash, or timeout) on buildbot, but pass on your local machine?

  • If the test finishes locally but is slow, more than 10 seconds or so, that would be why it's called a timeout on the bot.
  • Otherwise, try running it as part of a set of tests; it's possible that a test one or two (or ten) before this one is corrupting something that makes this one fail.
  • If it consistently works locally, make sure your environment looks like the one on the bot (look at the top of the stdio for the webkit_tests step to see all the environment variables and so on).
  • If none of that helps, and you have access to the bot itself, you may have to log in there and see if you can reproduce the problem manually.

Debugging DevTools Tests

  • Add debug_devtools=true to and compile: ninja -C out/Default devtools_frontend_resources

    Debug DevTools lets you avoid having to recompile after every change to the DevTools front-end.

  • Do one of the following:
    • Option A) Run from the chromium/src folder: blink/tools/ --additional-driver-flag='--debug-devtools' --additional-driver-flag='--remote-debugging-port=9222' --time-out-ms=6000000
    • Option B) If you need to debug an http/tests/inspector test, start httpd as described above. Then, run content_shell: out/Default/content_shell --debug-devtools --remote-debugging-port=9222 --run-layout-test
  • Open http://localhost:9222 in a stable/beta/canary Chrome, click the single link to open the devtools with the test loaded.
  • In the loaded devtools, set any required breakpoints and execute test() in the console to actually start the test.

NOTE: If the test is an html file, this means it's a legacy test so you need to add:

  • Add window.debugTest = true; to your test code as follows:

    window.debugTest = true;
    function test() {
      /* TEST CODE */

Bisecting Regressions

You can use git bisect to find which commit broke (or fixed!) a layout test in a fully automated way. Unlike, which downloads pre-built Chromium binaries, git bisect operates on your local checkout, so it can run tests with content_shell.

Bisecting can take several hours, but since it is fully automated you can leave it running overnight and view the results the next day.

To set up an automated bisect of a layout test regression, create a script like this:


# Exit code 125 tells git bisect to skip the revision.
gclient sync || exit 125
ninja -C out/Debug -j100 blink_tests || exit 125

blink/tools/ -t Debug \
  --no-show-results --no-retry-failures \

Modify the out directory, ninja args, and test name as appropriate, and save the script in ~/ Then run:

chmod u+x ~/  # mark script as executable
git bisect start <badrev> <goodrev>
git bisect run ~/
git bisect reset  # quit the bisect session

Rebaselining Layout Tests

To automatically re-baseline tests across all Chromium platforms, using the buildbot results, see How to rebaseline. Alternatively, to manually run and test and rebaseline it on your workstation, read on.
cd src/third_party/WebKit
Tools/Scripts/run-webkit-tests --reset-results foo/bar/test.html

If there are current expectation files for LayoutTests/foo/bar/test.html, the above command will overwrite the current baselines at their original locations with the actual results. The current baseline means the -expected.* file used to compare the actual result when the test is run locally, i.e. the first file found in the [baseline search path] (

If there are no current baselines, the above command will create new baselines in the platform-independent directory, e.g. LayoutTests/foo/bar/test-expected.{txt,png}.

When you rebaseline a test, make sure your commit description explains why the test is being re-baselined.

Rebaselining flag-specific expectations

Though we prefer the Rebaseline Tool to local rebaselining, the Rebaseline Tool doesn't support rebaselining flag-specific expectations.

cd src/third_party/WebKit
Tools/Script/run-webkit-tests --additional-driver-flag=--enable-flag --reset-results foo/bar/test.html

New baselines will be created in the flag-specific baselines directory, e.g. LayoutTests/flag-specific/enable-flag/foo/bar/test-expected.{txt,png}.

Then you can commit the new baselines and upload the patch for review.

However, it's difficult for reviewers to review the patch containing only new files. You can follow the steps below for easier review.

  1. Copy existing baselines to the flag-specific baselines directory for the tests to be rebaselined:

    Tools/Script/run-webkit-tests --additional-driver-flag=--enable-flag --copy-baselines foo/bar/test.html

    Then add the newly created baseline files, commit and upload the patch. Note that the above command won't copy baselines for passing tests.

  2. Rebaseline the test locally:

    Tools/Script/run-webkit-tests --additional-driver-flag=--enable-flag --reset-results foo/bar/test.html

    Commit the changes and upload the patch.

  3. Request review of the CL and tell the reviewer to compare the patch sets that were uploaded in step 1 and step 2 to see the differences of the rebaselines.


In addition to layout tests developed and run just by the Blink team, there is also a shared test suite, see web-platform-tests.

Known Issues

See bugs with the component Blink>Infra for issues related to Blink tools, include the layout test runner.

  • If QuickTime is not installed, the plugin tests fast/dom/object-embed-plugin-scripting.html and plugins/embed-attributes-setting.html are expected to fail.