blob: 82f1c0759f68ae9d10cf9fd535ebd04511647c03 [file] [log] [blame]
// Copyright 2014 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#include "net/quic/quic_flags.h"
// When true, the use time based loss detection instead of nack.
bool FLAGS_quic_use_time_loss_detection = false;
// If true, it will return as soon as an error is detected while validating
// CHLO.
bool FLAGS_use_early_return_when_verifying_chlo = true;
// When true, defaults to BBR congestion control instead of Cubic.
bool FLAGS_quic_use_bbr_congestion_control = false;
// If true, QUIC BBR congestion control may be enabled via Finch and/or via QUIC
// connection options.
bool FLAGS_quic_allow_bbr = false;
// Time period for which a given connection_id should live in the time-wait
// state.
int64_t FLAGS_quic_time_wait_list_seconds = 200;
// Currently, this number is quite conservative. The max QPS limit for an
// individual server silo is currently set to 1000 qps, though the actual max
// that we see in the wild is closer to 450 qps. Regardless, this means that
// the longest time-wait list we should see is 200 seconds * 1000 qps = 200000.
// Of course, there are usually many queries per QUIC connection, so we allow a
// factor of 3 leeway.
//
// Maximum number of connections on the time-wait list. A negative value implies
// no configured limit.
int64_t FLAGS_quic_time_wait_list_max_connections = 600000;
// Enables server-side support for QUIC stateless rejects.
bool FLAGS_enable_quic_stateless_reject_support = true;
// This flag is not in use, just to keep consistency for shared code.
bool FLAGS_quic_always_log_bugs_for_tests = true;
// If true, a QUIC connection option with tag DHDT can be used to disable
// HPACK\'s dynamic table.
bool FLAGS_quic_disable_hpack_dynamic_table = true;
// If true, multipath is enabled for the connection.
bool FLAGS_quic_enable_multipath = false;
// If true, require handshake confirmation for QUIC connections, functionally
// disabling 0-rtt handshakes.
// TODO(rtenneti): Enable this flag after CryptoServerTest's are fixed.
bool FLAGS_quic_require_handshake_confirmation = false;
// If true, Cubic's epoch is shifted when the sender is application-limited.
bool FLAGS_shift_quic_cubic_epoch_when_app_limited = true;
// If true, QUIC will measure head of line (HOL) blocking due between
// streams due to packet losses on the headers stream. The
// measurements will be surfaced via UMA histogram
// Net.QuicSession.HeadersHOLBlockedTime.
bool FLAGS_quic_measure_headers_hol_blocking_time = true;
// Disable QUIC's userspace pacing.
bool FLAGS_quic_disable_pacing = false;
// If true, Close the connection instead of writing unencrypted stream data.
bool FLAGS_quic_never_write_unencrypted_data = true;
// If true, reject any incoming QUIC which does not have the FIXD tag.
bool FLAGS_quic_require_fix = true;
// If true, headers stream will support receiving PUSH_PROMISE frames.
bool FLAGS_quic_supports_push_promise = true;
// If true, make sure new incoming streams correctly cede to higher
// priority (or batch) streams when doing QUIC writes.
bool FLAGS_quic_cede_correctly = true;
// If true, QUIC should correctly report if it supports ChaCha20. Otherwise,
// QUIC will lie and claim that it does not support ChaCha20. The primary use
// case for this is places where ChaCha20 is prohibitively expensive compared to
// AES-GCM.
bool FLAGS_quic_crypto_server_config_default_has_chacha20 = true;
// If true, QUIC will use newly refactored TCP sender code.
bool FLAGS_quic_use_new_tcp_sender = true;
// If true, QUIC connections will defer responding to ACKs to their send alarms.
bool FLAGS_quic_connection_defer_ack_response = true;
// Resend 0RTT requests in response to an REJ that re-establishes encryption.
bool FLAGS_quic_reply_to_rej = true;
// If true, QUIC connections can do bandwidth resumption with an initial window
// of < 10 packets.
bool FLAGS_quic_no_lower_bw_resumption_limit = true;
// Limit the ruction of slow start large reduction to 1/2 the current CWND once
// the initial flight has been acked.
bool FLAGS_quic_sslr_limit_reduction = true;
// If true, respect any configured max pacing rate.
bool FLAGS_quic_max_pacing_rate = true;
// If true, QuicWriter avoids calling HttpWriter::Write with 0 bytes when
// last_data == false.
bool FLAGS_quic_avoid_empty_nonfin_writes = true;
// If true, flow controller may grow the receive window size if necessary.
bool FLAGS_quic_auto_tune_receive_window = true;
// Add the ability for QUIC's time based loss detection to increase it's
// threshold after spurious losses.
bool FLAGS_quic_adaptive_loss_recovery = true;
// If true, enable auto tuning by default (server side).
bool FLAGS_quic_enable_autotune_by_default = true;
// Use largest acked in the most recent ack instead of largest acked ever in
// loss recovery.
bool FLAGS_quic_loss_recovery_use_largest_acked = true;
// Only set one alarm for sending at once, either the send alarm or
// retransmission alarm.
bool FLAGS_quic_only_one_sending_alarm = true;
// If true, the hash of the CHLO message will be used in the proof generated for
// an SCUP message.
bool FLAGS_quic_use_hash_in_scup = true;
// If true, consider receiving crypto frame on non crypto stream as memory
// corruption.
bool FLAGS_quic_detect_memory_corrpution = true;
// If true, QUIC public reset packets will have the \"pre-v33\" public header
// flags.
bool FLAGS_quic_use_old_public_reset_packets = true;
// Ignore the peer's recieve buffer size and instead set max CWND based on the
// amount of data the sender is willing to have in flight.
bool FLAGS_quic_ignore_srbf = false;
// Allow the NPRR connection option which reduces QUIC\'s pacing rate during
// recovery instead of PRR.
bool FLAGS_quic_allow_noprr = true;
// If true, multi-packet CHLOs are explicitly disallowed.
bool FLAGS_quic_disallow_multi_packet_chlo = true;