blob: 9374ff616d759b532982f167fcec927931dbda7c [file] [log] [blame]
#include "rar.hpp"
namespace third_party_unrar {
CmdExtract::CmdExtract(CommandData *Cmd)
{
CmdExtract::Cmd=Cmd;
*ArcName=0;
*DestFileName=0;
TotalFileCount=0;
Unp=new Unpack(&DataIO);
#ifdef RAR_SMP
Unp->SetThreads(Cmd->Threads);
#endif
}
CmdExtract::~CmdExtract()
{
delete Unp;
}
void CmdExtract::DoExtract()
{
#if defined(_WIN_ALL) && !defined(SFX_MODULE) && !defined(SILENT)
Fat32=NotFat32=false;
#endif
PasswordCancelled=false;
DataIO.SetCurrentCommand(Cmd->Command[0]);
FindData FD;
while (Cmd->GetArcName(ArcName,ASIZE(ArcName)))
if (FindFile::FastFind(ArcName,&FD))
DataIO.TotalArcSize+=FD.Size;
Cmd->ArcNames.Rewind();
while (Cmd->GetArcName(ArcName,ASIZE(ArcName)))
{
if (Cmd->ManualPassword)
Cmd->Password.Clean(); // Clean user entered password before processing next archive.
while (true)
{
EXTRACT_ARC_CODE Code=ExtractArchive();
if (Code!=EXTRACT_ARC_REPEAT)
break;
}
if (FindFile::FastFind(ArcName,&FD))
DataIO.ProcessedArcSize+=FD.Size;
}
// Clean user entered password. Not really required, just for extra safety.
if (Cmd->ManualPassword)
Cmd->Password.Clean();
if (TotalFileCount==0 && Cmd->Command[0]!='I' &&
ErrHandler.GetErrorCode()!=RARX_BADPWD) // Not in case of wrong archive password.
{
if (!PasswordCancelled)
uiMsg(UIERROR_NOFILESTOEXTRACT,ArcName);
// Other error codes may explain a reason of "no files extracted" clearer,
// so set it only if no other errors found (wrong mask set by user).
if (ErrHandler.GetErrorCode()==RARX_SUCCESS)
ErrHandler.SetErrorCode(RARX_NOFILES);
}
else
if (!Cmd->DisableDone)
{
if (Cmd->Command[0]=='I')
mprintf(St(MDone));
else
if (ErrHandler.GetErrorCount()==0)
mprintf(St(MExtrAllOk));
else
mprintf(St(MExtrTotalErr),ErrHandler.GetErrorCount());
}
}
void CmdExtract::ExtractArchiveInit(Archive &Arc)
{
DataIO.UnpArcSize=Arc.FileLength();
FileCount=0;
MatchedArgs=0;
#ifndef SFX_MODULE
FirstFile=true;
#endif
GlobalPassword=Cmd->Password.IsSet();
DataIO.UnpVolume=false;
PrevProcessed=false;
AllMatchesExact=true;
ReconstructDone=false;
AnySolidDataUnpackedWell=false;
StartTime.SetCurrentTime();
}
EXTRACT_ARC_CODE CmdExtract::ExtractArchive()
{
Archive Arc(Cmd);
if (!Arc.WOpen(ArcName))
return EXTRACT_ARC_NEXT;
if (!Arc.IsArchive(true))
{
#if !defined(SFX_MODULE) && !defined(RARDLL)
if (CmpExt(ArcName,L"rev"))
{
wchar FirstVolName[NM];
VolNameToFirstName(ArcName,FirstVolName,ASIZE(FirstVolName),true);
// If several volume names from same volume set are specified
// and current volume is not first in set and first volume is present
// and specified too, let's skip the current volume.
if (wcsicomp(ArcName,FirstVolName)!=0 && FileExist(FirstVolName) &&
Cmd->ArcNames.Search(FirstVolName,false))
return EXTRACT_ARC_NEXT;
RecVolumesTest(Cmd,NULL,ArcName);
TotalFileCount++; // Suppress "No files to extract" message.
return EXTRACT_ARC_NEXT;
}
#endif
mprintf(St(MNotRAR),ArcName);
#ifndef SFX_MODULE
if (CmpExt(ArcName,L"rar"))
#endif
ErrHandler.SetErrorCode(RARX_WARNING);
return EXTRACT_ARC_NEXT;
}
if (Arc.FailedHeaderDecryption) // Bad archive password.
return EXTRACT_ARC_NEXT;
#ifndef SFX_MODULE
if (Arc.Volume && !Arc.FirstVolume)
{
wchar FirstVolName[NM];
VolNameToFirstName(ArcName,FirstVolName,ASIZE(FirstVolName),Arc.NewNumbering);
// If several volume names from same volume set are specified
// and current volume is not first in set and first volume is present
// and specified too, let's skip the current volume.
if (wcsicomp(ArcName,FirstVolName)!=0 && FileExist(FirstVolName) &&
Cmd->ArcNames.Search(FirstVolName,false))
return EXTRACT_ARC_NEXT;
}
#endif
int64 VolumeSetSize=0; // Total size of volumes after the current volume.
if (Arc.Volume)
{
// Calculate the total size of all accessible volumes.
// This size is necessary to display the correct total progress indicator.
wchar NextName[NM];
wcsncpyz(NextName,Arc.FileName,ASIZE(NextName));
while (true)
{
// First volume is already added to DataIO.TotalArcSize
// in initial TotalArcSize calculation in DoExtract.
// So we skip it and start from second volume.
NextVolumeName(NextName,ASIZE(NextName),!Arc.NewNumbering);
FindData FD;
if (FindFile::FastFind(NextName,&FD))
VolumeSetSize+=FD.Size;
else
break;
}
DataIO.TotalArcSize+=VolumeSetSize;
}
ExtractArchiveInit(Arc);
if (*Cmd->Command=='T' || *Cmd->Command=='I')
Cmd->Test=true;
if (*Cmd->Command=='I')
{
Cmd->DisablePercentage=true;
}
else
uiStartArchiveExtract(!Cmd->Test,ArcName);
Arc.ViewComment();
while (1)
{
size_t Size=Arc.ReadHeader();
bool Repeat=false;
if (!ExtractCurrentFile(Arc,Size,Repeat))
{
if (Repeat)
{
// If we started extraction from not first volume and need to
// restart it from first, we must correct DataIO.TotalArcSize
// for correct total progress display. We subtract the size
// of current volume and all volumes after it and add the size
// of new (first) volume.
FindData OldArc,NewArc;
if (FindFile::FastFind(Arc.FileName,&OldArc) &&
FindFile::FastFind(ArcName,&NewArc))
DataIO.TotalArcSize-=VolumeSetSize+OldArc.Size-NewArc.Size;
return EXTRACT_ARC_REPEAT;
}
else
break;
}
}
#if !defined(SFX_MODULE) && !defined(RARDLL)
if (Cmd->Test && Arc.Volume)
RecVolumesTest(Cmd,&Arc,ArcName);
#endif
return EXTRACT_ARC_NEXT;
}
bool CmdExtract::ExtractCurrentFile(Archive &Arc,size_t HeaderSize,bool &Repeat)
{
wchar Command=Cmd->Command[0];
if (HeaderSize==0)
{
if (DataIO.UnpVolume)
{
#ifdef NOVOLUME
return false;
#else
// Supposing we unpack an old RAR volume without the end of archive
// record and last file is not split between volumes.
if (!MergeArchive(Arc,&DataIO,false,Command))
{
ErrHandler.SetErrorCode(RARX_WARNING);
return false;
}
#endif
}
else
return false;
}
HEADER_TYPE HeaderType=Arc.GetHeaderType();
if (HeaderType!=HEAD_FILE)
{
#ifndef SFX_MODULE
if (Arc.Format==RARFMT15 && HeaderType==HEAD3_OLDSERVICE && PrevProcessed)
SetExtraInfo20(Cmd,Arc,DestFileName);
#endif
if (HeaderType==HEAD_SERVICE && PrevProcessed)
SetExtraInfo(Cmd,Arc,DestFileName);
if (HeaderType==HEAD_ENDARC)
{
if (Arc.EndArcHead.NextVolume)
{
#ifdef NOVOLUME
return false;
#else
if (!MergeArchive(Arc,&DataIO,false,Command))
{
ErrHandler.SetErrorCode(RARX_WARNING);
return false;
}
Arc.Seek(Arc.CurBlockPos,SEEK_SET);
return true;
#endif
}
else
return false;
}
Arc.SeekToNext();
return true;
}
PrevProcessed=false;
// We can get negative sizes in corrupt archive and it is unacceptable
// for size comparisons in ComprDataIO::UnpRead, where we cast sizes
// to size_t and can exceed another read or available size. We could fix it
// when reading an archive. But we prefer to do it here, because this
// function is called directly in unrar.dll, so we fix bad parameters
// passed to dll. Also we want to see real negative sizes in the listing
// of corrupt archive. To prevent uninitialized data access perform
// these checks after rejecting zero length and non-file headers above.
if (Arc.FileHead.PackSize<0)
Arc.FileHead.PackSize=0;
if (Arc.FileHead.UnpSize<0)
Arc.FileHead.UnpSize=0;
if (!Cmd->Recurse && MatchedArgs>=Cmd->FileArgs.ItemsCount() && AllMatchesExact)
return false;
int MatchType=MATCH_WILDSUBPATH;
bool EqualNames=false;
wchar MatchedArg[NM];
int MatchNumber=Cmd->IsProcessFile(Arc.FileHead,&EqualNames,MatchType,MatchedArg,ASIZE(MatchedArg));
bool MatchFound=MatchNumber!=0;
#ifndef SFX_MODULE
if (Cmd->ExclPath==EXCL_BASEPATH)
{
wcsncpyz(Cmd->ArcPath,MatchedArg,ASIZE(Cmd->ArcPath));
*PointToName(Cmd->ArcPath)=0;
if (IsWildcard(Cmd->ArcPath)) // Cannot correctly process path*\* masks here.
*Cmd->ArcPath=0;
}
#endif
if (MatchFound && !EqualNames)
AllMatchesExact=false;
Arc.ConvertAttributes();
#if !defined(SFX_MODULE) && !defined(RARDLL)
if (Arc.FileHead.SplitBefore && FirstFile)
{
wchar CurVolName[NM];
wcsncpyz(CurVolName,ArcName,ASIZE(CurVolName));
VolNameToFirstName(ArcName,ArcName,ASIZE(ArcName),Arc.NewNumbering);
if (wcsicomp(ArcName,CurVolName)!=0 && FileExist(ArcName))
{
wcsncpyz(Cmd->ArcName,ArcName,ASIZE(ArcName)); // For GUI "Delete archive after extraction".
// If first volume name does not match the current name and if such
// volume name really exists, let's unpack from this first volume.
Repeat=true;
return false;
}
#ifndef RARDLL
if (!ReconstructDone)
{
ReconstructDone=true;
if (RecVolumesRestore(Cmd,Arc.FileName,true))
{
Repeat=true;
return false;
}
}
#endif
wcsncpyz(ArcName,CurVolName,ASIZE(ArcName));
}
#endif
wchar ArcFileName[NM];
ConvertPath(Arc.FileHead.FileName,ArcFileName);
if (Arc.FileHead.Version)
{
if (Cmd->VersionControl!=1 && !EqualNames)
{
if (Cmd->VersionControl==0)
MatchFound=false;
int Version=ParseVersionFileName(ArcFileName,false);
if (Cmd->VersionControl-1==Version)
ParseVersionFileName(ArcFileName,true);
else
MatchFound=false;
}
}
else
if (!Arc.IsArcDir() && Cmd->VersionControl>1)
MatchFound=false;
DataIO.UnpVolume=Arc.FileHead.SplitAfter;
DataIO.NextVolumeMissing=false;
Arc.Seek(Arc.NextBlockPos-Arc.FileHead.PackSize,SEEK_SET);
bool ExtrFile=false;
bool SkipSolid=false;
#ifndef SFX_MODULE
if (FirstFile && (MatchFound || Arc.Solid) && Arc.FileHead.SplitBefore)
{
if (MatchFound)
{
uiMsg(UIERROR_NEEDPREVVOL,Arc.FileName,ArcFileName);
#ifdef RARDLL
Cmd->DllError=ERAR_BAD_DATA;
#endif
ErrHandler.SetErrorCode(RARX_OPEN);
}
MatchFound=false;
}
FirstFile=false;
#endif
if (MatchFound || (SkipSolid=Arc.Solid)!=0)
{
// First common call of uiStartFileExtract. It is done before overwrite
// prompts, so if SkipSolid state is changed below, we'll need to make
// additional uiStartFileExtract calls with updated parameters.
if (!uiStartFileExtract(ArcFileName,!Cmd->Test,Cmd->Test && Command!='I',SkipSolid))
return false;
ExtrPrepareName(Arc,ArcFileName,DestFileName,ASIZE(DestFileName));
// DestFileName can be set empty in case of excessive -ap switch.
ExtrFile=!SkipSolid && *DestFileName!=0 && !Arc.FileHead.SplitBefore;
if ((Cmd->FreshFiles || Cmd->UpdateFiles) && (Command=='E' || Command=='X'))
{
FindData FD;
if (FindFile::FastFind(DestFileName,&FD))
{
if (FD.mtime >= Arc.FileHead.mtime)
{
// If directory already exists and its modification time is newer
// than start of extraction, it is likely it was created
// when creating a path to one of already extracted items.
// In such case we'll better update its time even if archived
// directory is older.
if (!FD.IsDir || FD.mtime<StartTime)
ExtrFile=false;
}
}
else
if (Cmd->FreshFiles)
ExtrFile=false;
}
if (!CheckUnpVer(Arc,ArcFileName))
{
ErrHandler.SetErrorCode(RARX_FATAL);
#ifdef RARDLL
Cmd->DllError=ERAR_UNKNOWN_FORMAT;
#endif
Arc.SeekToNext();
return !Arc.Solid; // Can try extracting next file only in non-solid archive.
}
while (true) // Repeat the password prompt for wrong and empty passwords.
{
if (Arc.FileHead.Encrypted)
{
// Stop archive extracting if user cancelled a password prompt.
#ifdef RARDLL
if (!ExtrDllGetPassword())
{
Cmd->DllError=ERAR_MISSING_PASSWORD;
return false;
}
#else
if (!ExtrGetPassword(Arc,ArcFileName))
{
PasswordCancelled=true;
return false;
}
#endif
}
// Set a password before creating the file, so we can skip creating
// in case of wrong password.
SecPassword FilePassword=Cmd->Password;
#if defined(_WIN_ALL) && !defined(SFX_MODULE)
ConvertDosPassword(Arc,FilePassword);
#endif
byte PswCheck[SIZE_PSWCHECK];
DataIO.SetEncryption(false,Arc.FileHead.CryptMethod,&FilePassword,
Arc.FileHead.SaltSet ? Arc.FileHead.Salt:NULL,
Arc.FileHead.InitV,Arc.FileHead.Lg2Count,
Arc.FileHead.HashKey,PswCheck);
// If header is damaged, we cannot rely on password check value,
// because it can be damaged too.
if (Arc.FileHead.Encrypted && Arc.FileHead.UsePswCheck &&
memcmp(Arc.FileHead.PswCheck,PswCheck,SIZE_PSWCHECK)!=0 &&
!Arc.BrokenHeader)
{
if (GlobalPassword) // For -p<pwd> or Ctrl+P.
{
// This message is used by Android GUI to reset cached passwords.
// Update appropriate code if changed.
uiMsg(UIERROR_BADPSW,ArcFileName);
}
else // For passwords entered manually.
{
// This message is used by Android GUI and Windows GUI and SFX to
// reset cached passwords. Update appropriate code if changed.
uiMsg(UIWAIT_BADPSW,ArcFileName);
Cmd->Password.Clean();
// Avoid new requests for unrar.dll to prevent the infinite loop
// if app always returns the same password.
#ifndef RARDLL
continue; // Request a password again.
#endif
}
#ifdef RARDLL
// If we already have ERAR_EOPEN as result of missing volume,
// we should not replace it with less precise ERAR_BAD_PASSWORD.
if (Cmd->DllError!=ERAR_EOPEN)
Cmd->DllError=ERAR_BAD_PASSWORD;
#endif
ErrHandler.SetErrorCode(RARX_BADPWD);
ExtrFile=false;
}
break;
}
#ifdef RARDLL
if (*Cmd->DllDestName!=0)
wcsncpyz(DestFileName,Cmd->DllDestName,ASIZE(DestFileName));
#endif
File CurFile;
#if defined(CHROMIUM_UNRAR)
// Since extraction is done in a sandbox, this must extract to the temp file
// handle instead of the default.
CurFile.SetFileHandle(Arc.GetTempFileHandle());
#endif
bool LinkEntry=Arc.FileHead.RedirType!=FSREDIR_NONE;
if (LinkEntry && Arc.FileHead.RedirType!=FSREDIR_FILECOPY)
{
if (ExtrFile && Command!='P' && !Cmd->Test)
{
// Overwrite prompt for symbolic and hard links.
bool UserReject=false;
if (FileExist(DestFileName) && !UserReject)
FileCreate(Cmd,NULL,DestFileName,ASIZE(DestFileName),&UserReject,Arc.FileHead.UnpSize,&Arc.FileHead.mtime);
if (UserReject)
ExtrFile=false;
}
}
else
if (Arc.IsArcDir())
{
if (!ExtrFile || Command=='P' || Command=='I' || Command=='E' || Cmd->ExclPath==EXCL_SKIPWHOLEPATH)
return true;
TotalFileCount++;
ExtrCreateDir(Arc,ArcFileName);
// It is important to not increment MatchedArgs here, so we extract
// dir with its entire contents and not dir record only even if
// dir record precedes files.
return true;
}
else
if (ExtrFile) // Create files and file copies (FSREDIR_FILECOPY).
ExtrFile=ExtrCreateFile(Arc,CurFile);
if (!ExtrFile && Arc.Solid)
{
SkipSolid=true;
ExtrFile=true;
// We changed SkipSolid, so we need to call uiStartFileExtract
// with "Skip" parameter to change the operation status
// from "extracting" to "skipping". For example, it can be necessary
// if user answered "No" to overwrite prompt when unpacking
// a solid archive.
if (!uiStartFileExtract(ArcFileName,false,false,true))
return false;
}
if (ExtrFile)
{
// Set it in test mode, so we also test subheaders such as NTFS streams
// after tested file.
if (Cmd->Test)
PrevProcessed=true;
bool TestMode=Cmd->Test || SkipSolid; // Unpack to memory, not to disk.
if (!SkipSolid)
{
if (!TestMode && Command!='P' && CurFile.IsDevice())
{
uiMsg(UIERROR_INVALIDNAME,Arc.FileName,DestFileName);
ErrHandler.WriteError(Arc.FileName,DestFileName);
}
TotalFileCount++;
}
FileCount++;
if (Command!='I')
{
if (SkipSolid)
mprintf(St(MExtrSkipFile),ArcFileName);
else
switch(Cmd->Test ? 'T':Command) // "Test" can be also enabled by -t switch.
{
case 'T':
mprintf(St(MExtrTestFile),ArcFileName);
break;
#ifndef SFX_MODULE
case 'P':
mprintf(St(MExtrPrinting),ArcFileName);
break;
#endif
case 'X':
case 'E':
mprintf(St(MExtrFile),DestFileName);
break;
}
}
if (!Cmd->DisablePercentage)
mprintf(L" ");
DataIO.CurUnpRead=0;
DataIO.CurUnpWrite=0;
DataIO.UnpHash.Init(Arc.FileHead.FileHash.Type,Cmd->Threads);
DataIO.PackedDataHash.Init(Arc.FileHead.FileHash.Type,Cmd->Threads);
DataIO.SetPackedSizeToRead(Arc.FileHead.PackSize);
DataIO.SetFiles(&Arc,&CurFile);
DataIO.SetTestMode(TestMode);
DataIO.SetSkipUnpCRC(SkipSolid);
#if defined(_WIN_ALL) && !defined(SFX_MODULE) && !defined(SILENT)
if (!TestMode && !Arc.BrokenHeader &&
Arc.FileHead.UnpSize>0xffffffff && (Fat32 || !NotFat32))
{
if (!Fat32) // Not detected yet.
NotFat32=!(Fat32=IsFAT(Cmd->ExtrPath));
if (Fat32)
uiMsg(UIMSG_FAT32SIZE); // Inform user about FAT32 size limit.
}
#endif
if (!TestMode && !Arc.BrokenHeader &&
(Arc.FileHead.PackSize<<11)>Arc.FileHead.UnpSize &&
(Arc.FileHead.UnpSize<100000000 || Arc.FileLength()>Arc.FileHead.PackSize))
CurFile.Prealloc(Arc.FileHead.UnpSize);
CurFile.SetAllowDelete(!Cmd->KeepBroken);
bool FileCreateMode=!TestMode && !SkipSolid && Command!='P';
bool ShowChecksum=true; // Display checksum verification result.
bool LinkSuccess=true; // Assume success for test mode.
if (LinkEntry)
{
FILE_SYSTEM_REDIRECT Type=Arc.FileHead.RedirType;
if (Type==FSREDIR_HARDLINK || Type==FSREDIR_FILECOPY)
{
wchar NameExisting[NM];
ExtrPrepareName(Arc,Arc.FileHead.RedirName,NameExisting,ASIZE(NameExisting));
if (FileCreateMode && *NameExisting!=0) // *NameExisting can be 0 in case of excessive -ap switch.
{
if (Type==FSREDIR_HARDLINK)
LinkSuccess=ExtractHardlink(DestFileName,NameExisting,ASIZE(NameExisting));
else
LinkSuccess=ExtractFileCopy(CurFile,Arc.FileName,DestFileName,NameExisting,ASIZE(NameExisting));
}
}
else
if (Type==FSREDIR_UNIXSYMLINK || Type==FSREDIR_WINSYMLINK || Type==FSREDIR_JUNCTION)
{
if (FileCreateMode)
LinkSuccess=ExtractSymlink(Cmd,DataIO,Arc,DestFileName);
}
else
{
uiMsg(UIERROR_UNKNOWNEXTRA, Arc.FileName, DestFileName);
LinkSuccess=false;
}
if (!LinkSuccess || (Arc.Format==RARFMT15 && !FileCreateMode))
{
// RAR 5.x links have a valid data checksum even in case of
// failure, because they do not store any data.
// We do not want to display "OK" in this case.
// For 4.x symlinks we verify the checksum only when extracting,
// but not when testing an archive.
ShowChecksum=false;
}
PrevProcessed=FileCreateMode && LinkSuccess;
}
else
if (!Arc.FileHead.SplitBefore)
{
if (Arc.FileHead.Method==0)
UnstoreFile(DataIO,Arc.FileHead.UnpSize);
else
{
Unp->Init(Arc.FileHead.WinSize,Arc.FileHead.Solid);
Unp->SetDestSize(Arc.FileHead.UnpSize);
#ifndef SFX_MODULE
if (Arc.Format!=RARFMT50 && Arc.FileHead.UnpVer<=15)
Unp->DoUnpack(15,FileCount>1 && Arc.Solid);
else
#endif
Unp->DoUnpack(Arc.FileHead.UnpVer,Arc.FileHead.Solid);
}
}
Arc.SeekToNext();
// We check for "split after" flag to detect partially extracted files
// from incomplete volume sets. For them file header contains packed
// data hash, which must not be compared against unpacked data hash
// to prevent accidental match. Moreover, for -m0 volumes packed data
// hash would match truncated unpacked data hash and lead to fake "OK"
// in incomplete volume set.
bool ValidCRC=!Arc.FileHead.SplitAfter && DataIO.UnpHash.Cmp(&Arc.FileHead.FileHash,Arc.FileHead.UseHashKey ? Arc.FileHead.HashKey:NULL);
// We set AnySolidDataUnpackedWell to true if we found at least one
// valid non-zero solid file in preceding solid stream. If it is true
// and if current encrypted file is broken, we do not need to hint
// about a wrong password and can report CRC error only.
if (!Arc.FileHead.Solid)
AnySolidDataUnpackedWell=false; // Reset the flag, because non-solid file is found.
else
if (Arc.FileHead.Method!=0 && Arc.FileHead.UnpSize>0 && ValidCRC)
AnySolidDataUnpackedWell=true;
bool BrokenFile=false;
// Checksum is not calculated in skip solid mode for performance reason.
if (!SkipSolid && ShowChecksum)
{
if (ValidCRC)
{
if (Command!='P' && Command!='I')
mprintf(L"%s%s ",Cmd->DisablePercentage ? L" ":L"\b\b\b\b\b ",
Arc.FileHead.FileHash.Type==HASH_NONE ? L" ?":St(MOk));
}
else
{
if (Arc.FileHead.Encrypted && (!Arc.FileHead.UsePswCheck ||
Arc.BrokenHeader) && !AnySolidDataUnpackedWell)
uiMsg(UIERROR_CHECKSUMENC,Arc.FileName,ArcFileName);
else
uiMsg(UIERROR_CHECKSUM,Arc.FileName,ArcFileName);
BrokenFile=true;
ErrHandler.SetErrorCode(RARX_CRC);
#ifdef RARDLL
// If we already have ERAR_EOPEN as result of missing volume
// or ERAR_BAD_PASSWORD for RAR5 wrong password,
// we should not replace it with less precise ERAR_BAD_DATA.
if (Cmd->DllError!=ERAR_EOPEN && Cmd->DllError!=ERAR_BAD_PASSWORD)
Cmd->DllError=ERAR_BAD_DATA;
#endif
}
}
else
mprintf(L"\b\b\b\b\b ");
if (!TestMode && (Command=='X' || Command=='E') &&
(!LinkEntry || (Arc.FileHead.RedirType==FSREDIR_FILECOPY && LinkSuccess)) &&
(!BrokenFile || Cmd->KeepBroken))
{
// We could preallocate more space that really written to broken file.
if (BrokenFile)
CurFile.Truncate();
#if defined(_WIN_ALL) || defined(_EMX)
if (Cmd->ClearArc)
Arc.FileHead.FileAttr&=~FILE_ATTRIBUTE_ARCHIVE;
#endif
CurFile.SetOpenFileTime(
Cmd->xmtime==EXTTIME_NONE ? NULL:&Arc.FileHead.mtime,
Cmd->xctime==EXTTIME_NONE ? NULL:&Arc.FileHead.ctime,
Cmd->xatime==EXTTIME_NONE ? NULL:&Arc.FileHead.atime);
CurFile.Close();
#if defined(_WIN_ALL) && !defined(SFX_MODULE)
if (Cmd->SetCompressedAttr &&
(Arc.FileHead.FileAttr & FILE_ATTRIBUTE_COMPRESSED)!=0)
SetFileCompression(CurFile.FileName,true);
#endif
SetFileHeaderExtra(Cmd,Arc,CurFile.FileName);
CurFile.SetCloseFileTime(
Cmd->xmtime==EXTTIME_NONE ? NULL:&Arc.FileHead.mtime,
Cmd->xatime==EXTTIME_NONE ? NULL:&Arc.FileHead.atime);
if (!Cmd->IgnoreGeneralAttr && !SetFileAttr(CurFile.FileName,Arc.FileHead.FileAttr))
uiMsg(UIERROR_FILEATTR,Arc.FileName,CurFile.FileName);
PrevProcessed=true;
}
}
}
// It is important to increment it for files, but not dirs. So we extract
// dir with its entire contents, not just dir record only even if dir
// record precedes files.
if (MatchFound)
MatchedArgs++;
if (DataIO.NextVolumeMissing)
return false;
if (!ExtrFile)
{
if (!Arc.Solid)
Arc.SeekToNext();
else
if (!SkipSolid)
return false;
}
return true;
}
void CmdExtract::UnstoreFile(ComprDataIO &DataIO,int64 DestUnpSize)
{
Array<byte> Buffer(File::CopyBufferSize());
while (true)
{
int ReadSize=DataIO.UnpRead(&Buffer[0],Buffer.Size());
if (ReadSize<=0)
break;
int WriteSize=ReadSize<DestUnpSize ? ReadSize:(int)DestUnpSize;
if (WriteSize>0)
{
DataIO.UnpWrite(&Buffer[0],WriteSize);
DestUnpSize-=WriteSize;
}
}
}
bool CmdExtract::ExtractFileCopy(File &New,wchar *ArcName,wchar *NameNew,wchar *NameExisting,size_t NameExistingSize)
{
SlashToNative(NameExisting,NameExisting,NameExistingSize); // Not needed for RAR 5.1+ archives.
File Existing;
if (!Existing.WOpen(NameExisting))
{
uiMsg(UIERROR_FILECOPY,ArcName,NameExisting,NameNew);
uiMsg(UIERROR_FILECOPYHINT,ArcName);
#ifdef RARDLL
Cmd->DllError=ERAR_EREFERENCE;
#endif
return false;
}
Array<char> Buffer(0x100000);
int64 CopySize=0;
while (true)
{
Wait();
int ReadSize=Existing.Read(&Buffer[0],Buffer.Size());
if (ReadSize==0)
break;
New.Write(&Buffer[0],ReadSize);
CopySize+=ReadSize;
}
return true;
}
void CmdExtract::ExtrPrepareName(Archive &Arc,const wchar *ArcFileName,wchar *DestName,size_t DestSize)
{
wcsncpyz(DestName,Cmd->ExtrPath,DestSize);
if (*Cmd->ExtrPath!=0)
{
wchar LastChar=*PointToLastChar(Cmd->ExtrPath);
// We need IsPathDiv check here to correctly handle Unix forward slash
// in the end of destination path in Windows: rar x arc dest/
// IsDriveDiv is needed for current drive dir: rar x arc d:
if (!IsPathDiv(LastChar) && !IsDriveDiv(LastChar))
{
// Destination path can be without trailing slash if it come from GUI shell.
AddEndSlash(DestName,DestSize);
}
}
#ifndef SFX_MODULE
if (Cmd->AppendArcNameToPath)
{
wcsncatz(DestName,PointToName(Arc.FirstVolumeName),DestSize);
SetExt(DestName,NULL,DestSize);
AddEndSlash(DestName,DestSize);
}
#endif
#ifndef SFX_MODULE
size_t ArcPathLength=wcslen(Cmd->ArcPath);
if (ArcPathLength>0)
{
size_t NameLength=wcslen(ArcFileName);
// Earlier we compared lengths only here, but then noticed a cosmetic bug
// in WinRAR. When extracting a file reference from subfolder with
// "Extract relative paths", so WinRAR sets ArcPath, if reference target
// is missing, error message removed ArcPath both from reference and target
// names. If target was stored in another folder, its name looked wrong.
if (NameLength>=ArcPathLength &&
wcsnicompc(Cmd->ArcPath,ArcFileName,ArcPathLength)==0 &&
(IsPathDiv(Cmd->ArcPath[ArcPathLength-1]) ||
IsPathDiv(ArcFileName[ArcPathLength]) || ArcFileName[ArcPathLength]==0))
{
ArcFileName+=Min(ArcPathLength,NameLength);
while (IsPathDiv(*ArcFileName))
ArcFileName++;
if (*ArcFileName==0) // Excessive -ap switch.
{
*DestName=0;
return;
}
}
}
#endif
wchar Command=Cmd->Command[0];
// Use -ep3 only in systems, where disk letters are exist, not in Unix.
bool AbsPaths=Cmd->ExclPath==EXCL_ABSPATH && Command=='X' && IsDriveDiv(':');
// We do not use any user specified destination paths when extracting
// absolute paths in -ep3 mode.
if (AbsPaths)
*DestName=0;
if (Command=='E' || Cmd->ExclPath==EXCL_SKIPWHOLEPATH)
wcsncatz(DestName,PointToName(ArcFileName),DestSize);
else
wcsncatz(DestName,ArcFileName,DestSize);
#ifdef _WIN_ALL
// Must do after Cmd->ArcPath processing above, so file name and arc path
// trailing spaces are in sync.
if (!Cmd->AllowIncompatNames)
MakeNameCompatible(DestName);
#endif
wchar DiskLetter=toupperw(DestName[0]);
if (AbsPaths)
{
if (DestName[1]=='_' && IsPathDiv(DestName[2]) &&
DiskLetter>='A' && DiskLetter<='Z')
DestName[1]=':';
else
if (DestName[0]=='_' && DestName[1]=='_')
{
// Convert __server\share to \\server\share.
DestName[0]=CPATHDIVIDER;
DestName[1]=CPATHDIVIDER;
}
}
}
#ifdef RARDLL
bool CmdExtract::ExtrDllGetPassword()
{
if (!Cmd->Password.IsSet())
{
if (Cmd->Callback!=NULL)
{
wchar PasswordW[MAXPASSWORD];
*PasswordW=0;
if (Cmd->Callback(UCM_NEEDPASSWORDW,Cmd->UserData,(LPARAM)PasswordW,ASIZE(PasswordW))==-1)
*PasswordW=0;
if (*PasswordW==0)
{
char PasswordA[MAXPASSWORD];
*PasswordA=0;
if (Cmd->Callback(UCM_NEEDPASSWORD,Cmd->UserData,(LPARAM)PasswordA,ASIZE(PasswordA))==-1)
*PasswordA=0;
GetWideName(PasswordA,NULL,PasswordW,ASIZE(PasswordW));
cleandata(PasswordA,sizeof(PasswordA));
}
Cmd->Password.Set(PasswordW);
cleandata(PasswordW,sizeof(PasswordW));
Cmd->ManualPassword=true;
}
if (!Cmd->Password.IsSet())
return false;
}
return true;
}
#endif
#ifndef RARDLL
bool CmdExtract::ExtrGetPassword(Archive &Arc,const wchar *ArcFileName)
{
if (!Cmd->Password.IsSet())
{
if (!uiGetPassword(UIPASSWORD_FILE,ArcFileName,&Cmd->Password)/* || !Cmd->Password.IsSet()*/)
{
// Suppress "test is ok" message if user cancelled the password prompt.
uiMsg(UIERROR_INCERRCOUNT);
return false;
}
Cmd->ManualPassword=true;
}
#if !defined(SILENT)
else
if (!GlobalPassword && !Arc.FileHead.Solid)
{
eprintf(St(MUseCurPsw),ArcFileName);
switch(Cmd->AllYes ? 1 : Ask(St(MYesNoAll)))
{
case -1:
ErrHandler.Exit(RARX_USERBREAK);
case 2:
if (!uiGetPassword(UIPASSWORD_FILE,ArcFileName,&Cmd->Password))
return false;
break;
case 3:
GlobalPassword=true;
break;
}
}
#endif
return true;
}
#endif
#if defined(_WIN_ALL) && !defined(SFX_MODULE)
void CmdExtract::ConvertDosPassword(Archive &Arc,SecPassword &DestPwd)
{
if (Arc.Format==RARFMT15 && Arc.FileHead.HostOS==HOST_MSDOS)
{
// We need the password in OEM encoding if file was encrypted by
// native RAR/DOS (not extender based). Let's make the conversion.
wchar PlainPsw[MAXPASSWORD];
Cmd->Password.Get(PlainPsw,ASIZE(PlainPsw));
char PswA[MAXPASSWORD];
CharToOemBuffW(PlainPsw,PswA,ASIZE(PswA));
PswA[ASIZE(PswA)-1]=0;
CharToWide(PswA,PlainPsw,ASIZE(PlainPsw));
DestPwd.Set(PlainPsw);
cleandata(PlainPsw,sizeof(PlainPsw));
cleandata(PswA,sizeof(PswA));
}
}
#endif
void CmdExtract::ExtrCreateDir(Archive &Arc,const wchar *ArcFileName)
{
if (Cmd->Test)
{
mprintf(St(MExtrTestFile),ArcFileName);
mprintf(L" %s",St(MOk));
return;
}
MKDIR_CODE MDCode=MakeDir(DestFileName,!Cmd->IgnoreGeneralAttr,Arc.FileHead.FileAttr);
bool DirExist=false;
if (MDCode!=MKDIR_SUCCESS)
{
DirExist=FileExist(DestFileName);
if (DirExist && !IsDir(GetFileAttr(DestFileName)))
{
// File with name same as this directory exists. Propose user
// to overwrite it.
bool UserReject;
FileCreate(Cmd,NULL,DestFileName,ASIZE(DestFileName),&UserReject,Arc.FileHead.UnpSize,&Arc.FileHead.mtime);
DirExist=false;
}
if (!DirExist)
{
CreatePath(DestFileName,true);
MDCode=MakeDir(DestFileName,!Cmd->IgnoreGeneralAttr,Arc.FileHead.FileAttr);
if (MDCode!=MKDIR_SUCCESS)
{
wchar OrigName[ASIZE(DestFileName)];
wcsncpyz(OrigName,DestFileName,ASIZE(OrigName));
MakeNameUsable(DestFileName,true);
CreatePath(DestFileName,true);
MDCode=MakeDir(DestFileName,!Cmd->IgnoreGeneralAttr,Arc.FileHead.FileAttr);
#ifndef SFX_MODULE
if (MDCode==MKDIR_SUCCESS)
uiMsg(UIERROR_RENAMING,Arc.FileName,OrigName,DestFileName);
#endif
}
}
}
if (MDCode==MKDIR_SUCCESS)
{
mprintf(St(MCreatDir),DestFileName);
mprintf(L" %s",St(MOk));
PrevProcessed=true;
}
else
if (DirExist)
{
if (!Cmd->IgnoreGeneralAttr)
SetFileAttr(DestFileName,Arc.FileHead.FileAttr);
PrevProcessed=true;
}
else
{
uiMsg(UIERROR_DIRCREATE,Arc.FileName,DestFileName);
ErrHandler.SysErrMsg();
#ifdef RARDLL
Cmd->DllError=ERAR_ECREATE;
#endif
ErrHandler.SetErrorCode(RARX_CREATE);
}
if (PrevProcessed)
{
#if defined(_WIN_ALL) && !defined(SFX_MODULE)
if (Cmd->SetCompressedAttr &&
(Arc.FileHead.FileAttr & FILE_ATTRIBUTE_COMPRESSED)!=0 && WinNT())
SetFileCompression(DestFileName,true);
#endif
SetFileHeaderExtra(Cmd,Arc,DestFileName);
SetDirTime(DestFileName,
Cmd->xmtime==EXTTIME_NONE ? NULL:&Arc.FileHead.mtime,
Cmd->xctime==EXTTIME_NONE ? NULL:&Arc.FileHead.ctime,
Cmd->xatime==EXTTIME_NONE ? NULL:&Arc.FileHead.atime);
}
}
bool CmdExtract::ExtrCreateFile(Archive &Arc,File &CurFile)
{
bool Success=true;
wchar Command=Cmd->Command[0];
#if !defined(SFX_MODULE)
if (Command=='P')
CurFile.SetHandleType(FILE_HANDLESTD);
#endif
if ((Command=='E' || Command=='X') && !Cmd->Test)
{
bool UserReject;
// Specify "write only" mode to avoid OpenIndiana NAS problems
// with SetFileTime and read+write files.
if (!FileCreate(Cmd,&CurFile,DestFileName,ASIZE(DestFileName),&UserReject,Arc.FileHead.UnpSize,&Arc.FileHead.mtime,true))
{
Success=false;
if (!UserReject)
{
ErrHandler.CreateErrorMsg(Arc.FileName,DestFileName);
#ifdef RARDLL
Cmd->DllError=ERAR_ECREATE;
#endif
if (!IsNameUsable(DestFileName))
{
uiMsg(UIMSG_CORRECTINGNAME,Arc.FileName);
wchar OrigName[ASIZE(DestFileName)];
wcsncpyz(OrigName,DestFileName,ASIZE(OrigName));
MakeNameUsable(DestFileName,true);
CreatePath(DestFileName,true);
if (FileCreate(Cmd,&CurFile,DestFileName,ASIZE(DestFileName),&UserReject,Arc.FileHead.UnpSize,&Arc.FileHead.mtime,true))
{
#ifndef SFX_MODULE
uiMsg(UIERROR_RENAMING,Arc.FileName,OrigName,DestFileName);
#endif
Success=true;
}
else
ErrHandler.CreateErrorMsg(Arc.FileName,DestFileName);
}
}
}
}
return Success;
}
bool CmdExtract::CheckUnpVer(Archive &Arc,const wchar *ArcFileName)
{
bool WrongVer;
if (Arc.Format==RARFMT50) // Both SFX and RAR can unpack RAR 5.0 archives.
WrongVer=Arc.FileHead.UnpVer>VER_UNPACK5;
else
{
#ifdef SFX_MODULE // SFX can unpack only RAR 2.9 archives.
WrongVer=Arc.FileHead.UnpVer!=VER_UNPACK;
#else // All formats since 1.3 for RAR.
WrongVer=Arc.FileHead.UnpVer<13 || Arc.FileHead.UnpVer>VER_UNPACK;
#endif
}
// We can unpack stored files regardless of compression version field.
if (Arc.FileHead.Method==0)
WrongVer=false;
if (WrongVer)
{
ErrHandler.UnknownMethodMsg(Arc.FileName,ArcFileName);
uiMsg(UIERROR_NEWERRAR,Arc.FileName);
}
return !WrongVer;
}
} // namespace third_party_unrar