blob: 350ad66517ba56596aae46dad54c322ae1026d9b [file] [log] [blame]
// Copyright 2016 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.
#include <stdint.h>
#include <memory>
#include <vector>
#include "base/callback_forward.h"
#include "base/macros.h"
#include "base/memory/weak_ptr.h"
#include "base/optional.h"
#include "media/base/audio_decoder_config.h"
#include "media/base/demuxer_stream.h"
#include "media/base/video_decoder_config.h"
#include "media/mojo/interfaces/remoting.mojom.h"
#include "media/remoting/rpc_broker.h"
#include "media/remoting/triggers.h"
#include "mojo/public/cpp/system/data_pipe.h"
#include "mojo/public/cpp/system/simple_watcher.h"
namespace base {
class SingleThreadTaskRunner;
namespace media {
class DemuxerStream;
namespace remoting {
// Class to fetch audio/video buffer from demuxer and send it to browser process
// via mojo::Remoting interface. Note the class is created and run on media
// thread using |media_task_runner|, Mojo data pipe should run on media thread,
// while RPC message should be sent on main thread using |main_task_runner|.
class DemuxerStreamAdapter {
using ErrorCallback = base::Callback<void(StopTrigger)>;
// |main_task_runner|: Task runner to post RPC message on main thread
// |media_task_runner|: Task runner to run whole class on media thread.
// |name|: Demuxer stream name. For troubleshooting purposes.
// |demuxer_stream|: Demuxer component.
// |rpc_broker|: Broker class to handle incoming and outgoing RPC message. It
// is used only on the main thread.
// |rpc_handle|: Unique value that references this DemuxerStreamAdapter.
// |stream_sender_info|: Transfer of pipe binding on the media thread. It is
// to access mojo interface for sending data stream.
// |producer_handle|: handle to send data using mojo data pipe.
// |error_callback|: Run if a fatal runtime error occurs and remoting should
// be shut down.
scoped_refptr<base::SingleThreadTaskRunner> main_task_runner,
scoped_refptr<base::SingleThreadTaskRunner> media_task_runner,
const std::string& name,
DemuxerStream* demuxer_stream,
const base::WeakPtr<RpcBroker>& rpc_broker,
int rpc_handle,
mojom::RemotingDataStreamSenderPtrInfo stream_sender_info,
mojo::ScopedDataPipeProducerHandle producer_handle,
const ErrorCallback& error_callback);
// Rpc handle for this class. This is used for sending/receiving RPC message
// with specific hanle using Rpcbroker.
int rpc_handle() const { return rpc_handle_; }
// Returns the number of bytes that have been written to the data pipe since
// the last call to this method. This is polled periodically by
// CourierRenderer for metrics purposes.
int64_t GetBytesWrittenAndReset();
// Signals if system is in flushing state. The caller uses |flushing| to
// signal when flush starts and when is done. During flush operation, all
// fetching data actions will be discarded. The return value indicates frame
// count in order to signal receiver what frames are in flight before flush,
// or base::nullopt if the flushing state was unchanged.
base::Optional<uint32_t> SignalFlush(bool flushing);
// Creates a Mojo data pipe configured appropriately for use with a
// DemuxerStreamAdapter.
static mojo::DataPipe* CreateDataPipe();
friend class MockDemuxerStreamAdapter;
// Receives RPC message from RpcBroker.
void OnReceivedRpc(std::unique_ptr<pb::RpcMessage> message);
// RPC message tasks.
void Initialize(int remote_callback_handle);
void ReadUntil(std::unique_ptr<pb::RpcMessage> message);
void EnableBitstreamConverter();
void RequestBuffer();
void SendReadAck();
// Callback function when retrieving data from demuxer.
void OnNewBuffer(DemuxerStream::Status status,
const scoped_refptr<DecoderBuffer>& input);
void TryWriteData(MojoResult result);
void ResetPendingFrame();
bool IsProcessingReadRequest() const {
// |read_until_callback_handle_| is set when RPC_DS_READUNTIL message is
// received, and will be reset to invalid value after
// RPC_DS_READUNTIL_CALLBACK is sent back to receiver. Therefore it can be
// used to determine if the class is in the reading state or not.
return read_until_callback_handle_ != RpcBroker::kInvalidHandle;
// Callback function when a fatal runtime error occurs.
void OnFatalError(StopTrigger stop_trigger);
const scoped_refptr<base::SingleThreadTaskRunner> main_task_runner_;
const scoped_refptr<base::SingleThreadTaskRunner> media_task_runner_;
// Name of demuxer stream. Debug only.
const std::string name_;
// Weak pointer of RpcBroker. It should use |main_task_runner_| to access the
// interfaces.
const base::WeakPtr<RpcBroker> rpc_broker_;
// RPC handle for this demuxer stream service.
const int rpc_handle_;
// Demuxer stream and stream type.
DemuxerStream* const demuxer_stream_;
const DemuxerStream::Type type_;
// Run by OnFatalError to propagate StopTriggers back to the
// CourierRenderer that owns this instance. This is not-null at
// construction time, and set to null the first time OnFatalError() is called.
ErrorCallback error_callback_;
// Remote RPC handle for demuxer initialization. The value is provided by
// receiver from RPC_DS_INITIALIZE message and will be used as handle in
int remote_callback_handle_;
// Remote RPC handle for reading data from demuxer. The value is provided by
// receiver from RPC_DS_READUNTIL message and will be used as handle in
// RPC_DS_READUNTIL_CALLBACK message. The handle can be used to indicate
// whether it is in reading state because not only each RPC_DS_READUNTIL
// message provides different callback handle, but also it is only set to
// valid handle while in reading state.
int read_until_callback_handle_;
// Current frame count issued by RPC_DS_READUNTIL RPC message. It should send
// all frame data with count id smaller than |read_until_count_| before
// sending RPC_DS_READUNTIL_CALLBACK back to receiver.
uint32_t read_until_count_;
// Count id of last frame sent.
uint32_t last_count_;
// Flag to indicate if it's on flushing operation. All actions should be
// aborted and data should be discarded when the value is true.
bool pending_flush_;
// Frame buffer and its information that is currently in process of writing to
// Mojo data pipe.
std::vector<uint8_t> pending_frame_;
uint32_t current_pending_frame_offset_;
bool pending_frame_is_eos_;
// Monitor if data pipe is available to write data.
mojo::SimpleWatcher write_watcher_;
// Keeps latest demuxer stream status and audio/video decoder config.
DemuxerStream::Status media_status_;
AudioDecoderConfig audio_config_;
VideoDecoderConfig video_config_;
mojom::RemotingDataStreamSenderPtr stream_sender_;
mojo::ScopedDataPipeProducerHandle producer_handle_;
// Tracks the number of bytes written to the pipe.
int64_t bytes_written_to_pipe_;
// WeakPtrFactory only for reading buffer from demuxer stream. This is used
// for canceling all read callbacks provided to the |demuxer_stream_| before a
// flush.
base::WeakPtrFactory<DemuxerStreamAdapter> request_buffer_weak_factory_;
// WeakPtrFactory for normal usage.
base::WeakPtrFactory<DemuxerStreamAdapter> weak_factory_;
} // namespace remoting
} // namespace media