third_party/tcmalloc/vendor/src/tests/profiler_unittest.sh - chromium/src - Git at Google

 #!/bin/sh

 # Copyright (c) 2005, Google Inc.
 # All rights reserved.
 #
 # Redistribution and use in source and binary forms, with or without
 # modification, are permitted provided that the following conditions are
 # met:
 #
 #     * Redistributions of source code must retain the above copyright
 # notice, this list of conditions and the following disclaimer.
 #     * Redistributions in binary form must reproduce the above
 # copyright notice, this list of conditions and the following disclaimer
 # in the documentation and/or other materials provided with the
 # distribution.
 #     * Neither the name of Google Inc. nor the names of its
 # contributors may be used to endorse or promote products derived from
 # this software without specific prior written permission.
 #
 # THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 # "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 # LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 # A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 # OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 # SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 # LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 # DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 # THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 # (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 # OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

 # ---
 # Author: Craig Silverstein
 #
 # Runs the 4 profiler unittests and makes sure their profiles look
 # appropriate.  We expect two commandline args, as described below.
 #
 # We run under the assumption that if $PROFILER1 is run with no
 # arguments, it prints a usage line of the form
 #   USAGE: <actual executable being run> [...]
 #
 # This is because libtool sometimes turns the 'executable' into a
 # shell script which runs an actual binary somewhere else.

 # We expect BINDIR and PPROF_PATH to be set in the environment.
 # If not, we set them to some reasonable values
 BINDIR="${BINDIR:-.}"
 PPROF_PATH="${PPROF_PATH:-$BINDIR/src/pprof}"

 if [ "x$1" = "x-h" -o "x$1" = "x--help" ]; then
   echo "USAGE: $0 [unittest dir] [path to pprof]"
   echo "       By default, unittest_dir=$BINDIR, pprof_path=$PPROF_PATH"
   exit 1
 fi

 TMPDIR=/tmp/profile_info

 UNITTEST_DIR=${1:-$BINDIR}
 PPROF=${2:-$PPROF_PATH}

 # We test the sliding-window functionality of the cpu-profile reader
 # by using a small stride, forcing lots of reads.
 PPROF_FLAGS="--test_stride=128"

 PROFILER1="$UNITTEST_DIR/profiler1_unittest"
 PROFILER2="$UNITTEST_DIR/profiler2_unittest"
 PROFILER3="$UNITTEST_DIR/profiler3_unittest"
 PROFILER4="$UNITTEST_DIR/profiler4_unittest"

 # Unfortunately, for us, libtool can replace executables with a shell
 # script that does some work before calling the 'real' executable
 # under a different name.  We need the 'real' executable name to run
 # pprof on it.  We've constructed all the binaries used in this
 # unittest so when they are called with no arguments, they report
 # their argv[0], which is the real binary name.
 Realname() {
   "$1" 2>&1 | awk '{print $2; exit;}'
 }

 PROFILER1_REALNAME=`Realname "$PROFILER1"`
 PROFILER2_REALNAME=`Realname "$PROFILER2"`
 PROFILER3_REALNAME=`Realname "$PROFILER3"`
 PROFILER4_REALNAME=`Realname "$PROFILER4"`

 # It's meaningful to the profiler, so make sure we know its state
 unset CPUPROFILE

 # Some output/logging in the profiler can cause issues when running the unit
 # tests. For example, logging a warning when the profiler is detected as being
 # present but no CPUPROFILE is specified in the environment. Especially when
 # we are checking for a silent run or specific timing constraints are being
 # checked. So set the env variable signifying that we are running in a unit
 # test environment.
 PERFTOOLS_UNITTEST=1

 rm -rf "$TMPDIR"
 mkdir "$TMPDIR" || exit 2

 num_failures=0

 RegisterFailure() {
   num_failures=`expr $num_failures + 1`
 }

 # Takes two filenames representing profiles, with their executable scripts,
 # and a multiplier, and verifies that the 'contentful' functions in each
 # profile take the same time (possibly scaled by the given multiplier). It
 # used to be "same" meant within 50%, after adding an noise-reducing X units
 # to each value.  But even that would often spuriously fail, so now it's
 # "both non-zero". We're pretty forgiving.
 VerifySimilar() {
   prof1="$TMPDIR/$1"
   exec1="$2"
   prof2="$TMPDIR/$3"
   exec2="$4"
   mult="$5"

   # We are careful not to put exec1 and exec2 in quotes, because if
   # they are the empty string, it means we want to use the 1-arg
   # version of pprof.
   mthread1=`"$PPROF" $PPROF_FLAGS $exec1 "$prof1" | grep test_main_thread | awk '{print $1}'`
   mthread2=`"$PPROF" $PPROF_FLAGS $exec2 "$prof2" | grep test_main_thread | awk '{print $1}'`
   mthread1_plus=`expr $mthread1 + 5`
   mthread2_plus=`expr $mthread2 + 5`
   if [ -z "$mthread1" ] || [ -z "$mthread2" ] || \
      [ "$mthread1" -le 0 -o "$mthread2" -le 0 ]
 #    || [ `expr $mthread1_plus \* $mult` -gt `expr $mthread2_plus \* 2` -o \
 #         `expr $mthread1_plus \* $mult \* 2` -lt `expr $mthread2_plus` ]
   then
     echo
     echo ">>> profile on $exec1 vs $exec2 with multiplier $mult failed:"
     echo "Actual times (in profiling units) were '$mthread1' vs. '$mthread2'"
     echo
     RegisterFailure
   fi
 }

 # Takes two filenames representing profiles, and optionally their
 # executable scripts (these may be empty if the profiles include
 # symbols), and verifies that the two profiles are identical.
 VerifyIdentical() {
   prof1="$TMPDIR/$1"
   exec1="$2"
   prof2="$TMPDIR/$3"
   exec2="$4"

   # We are careful not to put exec1 and exec2 in quotes, because if
   # they are the empty string, it means we want to use the 1-arg
   # version of pprof.
   "$PPROF" $PPROF_FLAGS $exec1 "$prof1" > "$TMPDIR/out1"
   "$PPROF" $PPROF_FLAGS $exec2 "$prof2" > "$TMPDIR/out2"
   diff=`diff "$TMPDIR/out1" "$TMPDIR/out2"`

   if [ ! -z "$diff" ]; then
     echo
     echo ">>> profile doesn't match, args: $exec1 $prof1 vs. $exec2 $prof2"
     echo ">>> Diff:"
     echo "$diff"
     echo
     RegisterFailure
   fi
 }

 # Takes a filename representing a profile, with its executable,
 # and a multiplier, and verifies that the main-thread function takes
 # the same amount of time as the other-threads function (possibly scaled
 # by the given multiplier).  Figuring out the multiplier can be tricky,
 # since by design the main thread runs twice as long as each of the
 # 'other' threads!  It used to be "same" meant within 50%, after adding an
 # noise-reducing X units to each value.  But even that would often
 # spuriously fail, so now it's "both non-zero".  We're pretty forgiving.
 VerifyAcrossThreads() {
   prof1="$TMPDIR/$1"
   # We need to run the script with no args to get the actual exe name
   exec1="$2"
   mult="$3"

   # We are careful not to put exec1 in quotes, because if it is the
   # empty string, it means we want to use the 1-arg version of pprof.
   mthread=`$PPROF $PPROF_FLAGS $exec1 "$prof1" | grep test_main_thread | awk '{print $1}'`
   othread=`$PPROF $PPROF_FLAGS $exec1 "$prof1" | grep test_other_thread | awk '{print $1}'`
   if [ -z "$mthread" ] || [ -z "$othread" ] || \
      [ "$mthread" -le 0 -o "$othread" -le 0 ]
 #    || [ `expr $mthread \* $mult \* 3` -gt `expr $othread \* 10` -o \
 #         `expr $mthread \* $mult \* 10` -lt `expr $othread \* 3` ]
   then
     echo
     echo ">>> profile on $exec1 (main vs thread) with multiplier $mult failed:"
     echo "Actual times (in profiling units) were '$mthread' vs. '$othread'"
     echo
     RegisterFailure
   fi
 }

 echo
 echo ">>> WARNING <<<"
 echo "This test looks at timing information to determine correctness."
 echo "If your system is loaded, the test may spuriously fail."
 echo "If the test does fail with an 'Actual times' error, try running again."
 echo

 # profiler1 is a non-threaded version
 "$PROFILER1" 50 1 "$TMPDIR/p1" || RegisterFailure
 "$PROFILER1" 100 1 "$TMPDIR/p2" || RegisterFailure
 VerifySimilar p1 "$PROFILER1_REALNAME" p2 "$PROFILER1_REALNAME" 2

 # Verify the same thing works if we statically link
 "$PROFILER2" 50 1 "$TMPDIR/p3" || RegisterFailure
 "$PROFILER2" 100 1 "$TMPDIR/p4" || RegisterFailure
 VerifySimilar p3 "$PROFILER2_REALNAME" p4 "$PROFILER2_REALNAME" 2

 # Verify the same thing works if we specify via CPUPROFILE
 CPUPROFILE="$TMPDIR/p5" "$PROFILER2" 50 || RegisterFailure
 CPUPROFILE="$TMPDIR/p6" "$PROFILER2" 100 || RegisterFailure
 VerifySimilar p5 "$PROFILER2_REALNAME" p6 "$PROFILER2_REALNAME" 2

 CPUPROFILE="$TMPDIR/p5b" "$PROFILER3" 30 || RegisterFailure
 CPUPROFILE="$TMPDIR/p5c" "$PROFILER3" 60 || RegisterFailure
 VerifySimilar p5b "$PROFILER3_REALNAME" p5c "$PROFILER3_REALNAME" 2

 # Now try what happens when we use threads
 "$PROFILER3" 30 2 "$TMPDIR/p7" || RegisterFailure
 "$PROFILER3" 60 2 "$TMPDIR/p8" || RegisterFailure
 VerifySimilar p7 "$PROFILER3_REALNAME" p8 "$PROFILER3_REALNAME" 2

 "$PROFILER4" 30 2 "$TMPDIR/p9" || RegisterFailure
 "$PROFILER4" 60 2 "$TMPDIR/p10" || RegisterFailure
 VerifySimilar p9 "$PROFILER4_REALNAME" p10 "$PROFILER4_REALNAME" 2

 # More threads!
 "$PROFILER4" 25 3 "$TMPDIR/p9" || RegisterFailure
 "$PROFILER4" 50 3 "$TMPDIR/p10" || RegisterFailure
 VerifySimilar p9 "$PROFILER4_REALNAME" p10 "$PROFILER4_REALNAME" 2

 # Compare how much time the main thread takes compared to the other threads
 # Recall the main thread runs twice as long as the other threads, by design.
 "$PROFILER4" 20 4 "$TMPDIR/p11" || RegisterFailure
 VerifyAcrossThreads p11 "$PROFILER4_REALNAME" 2

 # Test symbol save and restore
 "$PROFILER1" 50 1 "$TMPDIR/p12" || RegisterFailure
 "$PPROF" $PPROF_FLAGS "$PROFILER1_REALNAME" "$TMPDIR/p12" --raw \
     >"$TMPDIR/p13" 2>/dev/null || RegisterFailure
 VerifyIdentical p12 "$PROFILER1_REALNAME" p13 "" || RegisterFailure

 "$PROFILER3" 30 2 "$TMPDIR/p14" || RegisterFailure
 "$PPROF" $PPROF_FLAGS "$PROFILER3_REALNAME" "$TMPDIR/p14" --raw \
     >"$TMPDIR/p15" 2>/dev/null || RegisterFailure
 VerifyIdentical p14 "$PROFILER3_REALNAME" p15 "" || RegisterFailure

 # Test using ITIMER_REAL instead of ITIMER_PROF.
 env CPUPROFILE_REALTIME=1 "$PROFILER3" 30 2 "$TMPDIR/p16" || RegisterFailure
 env CPUPROFILE_REALTIME=1 "$PROFILER3" 60 2 "$TMPDIR/p17" || RegisterFailure
 VerifySimilar p16 "$PROFILER3_REALNAME" p17 "$PROFILER3_REALNAME" 2


 # Make sure that when we have a process with a fork, the profiles don't
 # clobber each other
 CPUPROFILE="$TMPDIR/pfork" "$PROFILER1" 1 -2 || RegisterFailure
 n=`ls $TMPDIR/pfork* | wc -l`
 if [ $n != 3 ]; then
   echo "FORK test FAILED: expected 3 profiles (for main + 2 children), found $n"
   num_failures=`expr $num_failures + 1`
 fi

 rm -rf "$TMPDIR"      # clean up

 echo "Tests finished with $num_failures failures"
 exit $num_failures
	#!/bin/sh

	# Copyright (c) 2005, Google Inc.
	# All rights reserved.
	#
	# Redistribution and use in source and binary forms, with or without
	# modification, are permitted provided that the following conditions are
	# met:
	#
	# * Redistributions of source code must retain the above copyright
	# notice, this list of conditions and the following disclaimer.
	# * Redistributions in binary form must reproduce the above
	# copyright notice, this list of conditions and the following disclaimer
	# in the documentation and/or other materials provided with the
	# distribution.
	# * Neither the name of Google Inc. nor the names of its
	# contributors may be used to endorse or promote products derived from
	# this software without specific prior written permission.
	#
	# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
	# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
	# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
	# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
	# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
	# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
	# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
	# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
	# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
	# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
	# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

	# ---
	# Author: Craig Silverstein
	#
	# Runs the 4 profiler unittests and makes sure their profiles look
	# appropriate. We expect two commandline args, as described below.
	#
	# We run under the assumption that if $PROFILER1 is run with no
	# arguments, it prints a usage line of the form
	# USAGE: <actual executable being run> [...]
	#
	# This is because libtool sometimes turns the 'executable' into a
	# shell script which runs an actual binary somewhere else.

	# We expect BINDIR and PPROF_PATH to be set in the environment.
	# If not, we set them to some reasonable values
	BINDIR="${BINDIR:-.}"
	PPROF_PATH="${PPROF_PATH:-$BINDIR/src/pprof}"

	if [ "x$1" = "x-h" -o "x$1" = "x--help" ]; then
	echo "USAGE: $0 [unittest dir] [path to pprof]"
	echo " By default, unittest_dir=$BINDIR, pprof_path=$PPROF_PATH"
	exit 1
	fi

	TMPDIR=/tmp/profile_info

	UNITTEST_DIR=${1:-$BINDIR}
	PPROF=${2:-$PPROF_PATH}

	# We test the sliding-window functionality of the cpu-profile reader
	# by using a small stride, forcing lots of reads.
	PPROF_FLAGS="--test_stride=128"

	PROFILER1="$UNITTEST_DIR/profiler1_unittest"
	PROFILER2="$UNITTEST_DIR/profiler2_unittest"
	PROFILER3="$UNITTEST_DIR/profiler3_unittest"
	PROFILER4="$UNITTEST_DIR/profiler4_unittest"

	# Unfortunately, for us, libtool can replace executables with a shell
	# script that does some work before calling the 'real' executable
	# under a different name. We need the 'real' executable name to run
	# pprof on it. We've constructed all the binaries used in this
	# unittest so when they are called with no arguments, they report
	# their argv[0], which is the real binary name.
	Realname() {
	"$1" 2>&1 \| awk '{print $2; exit;}'
	}

	PROFILER1_REALNAME=`Realname "$PROFILER1"`
	PROFILER2_REALNAME=`Realname "$PROFILER2"`
	PROFILER3_REALNAME=`Realname "$PROFILER3"`
	PROFILER4_REALNAME=`Realname "$PROFILER4"`

	# It's meaningful to the profiler, so make sure we know its state
	unset CPUPROFILE

	# Some output/logging in the profiler can cause issues when running the unit
	# tests. For example, logging a warning when the profiler is detected as being
	# present but no CPUPROFILE is specified in the environment. Especially when
	# we are checking for a silent run or specific timing constraints are being
	# checked. So set the env variable signifying that we are running in a unit
	# test environment.
	PERFTOOLS_UNITTEST=1

	rm -rf "$TMPDIR"
	mkdir "$TMPDIR" \|\| exit 2

	num_failures=0

	RegisterFailure() {
	num_failures=`expr $num_failures + 1`
	}

	# Takes two filenames representing profiles, with their executable scripts,
	# and a multiplier, and verifies that the 'contentful' functions in each
	# profile take the same time (possibly scaled by the given multiplier). It
	# used to be "same" meant within 50%, after adding an noise-reducing X units
	# to each value. But even that would often spuriously fail, so now it's
	# "both non-zero". We're pretty forgiving.
	VerifySimilar() {
	prof1="$TMPDIR/$1"
	exec1="$2"
	prof2="$TMPDIR/$3"
	exec2="$4"
	mult="$5"

	# We are careful not to put exec1 and exec2 in quotes, because if
	# they are the empty string, it means we want to use the 1-arg
	# version of pprof.
	mthread1=`"$PPROF" $PPROF_FLAGS $exec1 "$prof1" \| grep test_main_thread \| awk '{print $1}'`
	mthread2=`"$PPROF" $PPROF_FLAGS $exec2 "$prof2" \| grep test_main_thread \| awk '{print $1}'`
	mthread1_plus=`expr $mthread1 + 5`
	mthread2_plus=`expr $mthread2 + 5`
	if [ -z "$mthread1" ] \|\| [ -z "$mthread2" ] \|\| \
	[ "$mthread1" -le 0 -o "$mthread2" -le 0 ]
	# \|\| [ `expr $mthread1_plus \* $mult` -gt `expr $mthread2_plus \* 2` -o \
	# `expr $mthread1_plus \* $mult \* 2` -lt `expr $mthread2_plus` ]
	then
	echo
	echo ">>> profile on $exec1 vs $exec2 with multiplier $mult failed:"
	echo "Actual times (in profiling units) were '$mthread1' vs. '$mthread2'"
	echo
	RegisterFailure
	fi
	}

	# Takes two filenames representing profiles, and optionally their
	# executable scripts (these may be empty if the profiles include
	# symbols), and verifies that the two profiles are identical.
	VerifyIdentical() {
	prof1="$TMPDIR/$1"
	exec1="$2"
	prof2="$TMPDIR/$3"
	exec2="$4"

	# We are careful not to put exec1 and exec2 in quotes, because if
	# they are the empty string, it means we want to use the 1-arg
	# version of pprof.
	"$PPROF" $PPROF_FLAGS $exec1 "$prof1" > "$TMPDIR/out1"
	"$PPROF" $PPROF_FLAGS $exec2 "$prof2" > "$TMPDIR/out2"
	diff=`diff "$TMPDIR/out1" "$TMPDIR/out2"`

	if [ ! -z "$diff" ]; then
	echo
	echo ">>> profile doesn't match, args: $exec1 $prof1 vs. $exec2 $prof2"
	echo ">>> Diff:"
	echo "$diff"
	echo
	RegisterFailure
	fi
	}

	# Takes a filename representing a profile, with its executable,
	# and a multiplier, and verifies that the main-thread function takes
	# the same amount of time as the other-threads function (possibly scaled
	# by the given multiplier). Figuring out the multiplier can be tricky,
	# since by design the main thread runs twice as long as each of the
	# 'other' threads! It used to be "same" meant within 50%, after adding an
	# noise-reducing X units to each value. But even that would often
	# spuriously fail, so now it's "both non-zero". We're pretty forgiving.
	VerifyAcrossThreads() {
	prof1="$TMPDIR/$1"
	# We need to run the script with no args to get the actual exe name
	exec1="$2"
	mult="$3"

	# We are careful not to put exec1 in quotes, because if it is the
	# empty string, it means we want to use the 1-arg version of pprof.
	mthread=`$PPROF $PPROF_FLAGS $exec1 "$prof1" \| grep test_main_thread \| awk '{print $1}'`
	othread=`$PPROF $PPROF_FLAGS $exec1 "$prof1" \| grep test_other_thread \| awk '{print $1}'`
	if [ -z "$mthread" ] \|\| [ -z "$othread" ] \|\| \
	[ "$mthread" -le 0 -o "$othread" -le 0 ]
	# \|\| [ `expr $mthread \* $mult \* 3` -gt `expr $othread \* 10` -o \
	# `expr $mthread \* $mult \* 10` -lt `expr $othread \* 3` ]
	then
	echo
	echo ">>> profile on $exec1 (main vs thread) with multiplier $mult failed:"
	echo "Actual times (in profiling units) were '$mthread' vs. '$othread'"
	echo
	RegisterFailure
	fi
	}

	echo
	echo ">>> WARNING <<<"
	echo "This test looks at timing information to determine correctness."
	echo "If your system is loaded, the test may spuriously fail."
	echo "If the test does fail with an 'Actual times' error, try running again."
	echo

	# profiler1 is a non-threaded version
	"$PROFILER1" 50 1 "$TMPDIR/p1" \|\| RegisterFailure
	"$PROFILER1" 100 1 "$TMPDIR/p2" \|\| RegisterFailure
	VerifySimilar p1 "$PROFILER1_REALNAME" p2 "$PROFILER1_REALNAME" 2

	# Verify the same thing works if we statically link
	"$PROFILER2" 50 1 "$TMPDIR/p3" \|\| RegisterFailure
	"$PROFILER2" 100 1 "$TMPDIR/p4" \|\| RegisterFailure
	VerifySimilar p3 "$PROFILER2_REALNAME" p4 "$PROFILER2_REALNAME" 2

	# Verify the same thing works if we specify via CPUPROFILE
	CPUPROFILE="$TMPDIR/p5" "$PROFILER2" 50 \|\| RegisterFailure
	CPUPROFILE="$TMPDIR/p6" "$PROFILER2" 100 \|\| RegisterFailure
	VerifySimilar p5 "$PROFILER2_REALNAME" p6 "$PROFILER2_REALNAME" 2

	CPUPROFILE="$TMPDIR/p5b" "$PROFILER3" 30 \|\| RegisterFailure
	CPUPROFILE="$TMPDIR/p5c" "$PROFILER3" 60 \|\| RegisterFailure
	VerifySimilar p5b "$PROFILER3_REALNAME" p5c "$PROFILER3_REALNAME" 2

	# Now try what happens when we use threads
	"$PROFILER3" 30 2 "$TMPDIR/p7" \|\| RegisterFailure
	"$PROFILER3" 60 2 "$TMPDIR/p8" \|\| RegisterFailure
	VerifySimilar p7 "$PROFILER3_REALNAME" p8 "$PROFILER3_REALNAME" 2

	"$PROFILER4" 30 2 "$TMPDIR/p9" \|\| RegisterFailure
	"$PROFILER4" 60 2 "$TMPDIR/p10" \|\| RegisterFailure
	VerifySimilar p9 "$PROFILER4_REALNAME" p10 "$PROFILER4_REALNAME" 2

	# More threads!
	"$PROFILER4" 25 3 "$TMPDIR/p9" \|\| RegisterFailure
	"$PROFILER4" 50 3 "$TMPDIR/p10" \|\| RegisterFailure
	VerifySimilar p9 "$PROFILER4_REALNAME" p10 "$PROFILER4_REALNAME" 2

	# Compare how much time the main thread takes compared to the other threads
	# Recall the main thread runs twice as long as the other threads, by design.
	"$PROFILER4" 20 4 "$TMPDIR/p11" \|\| RegisterFailure
	VerifyAcrossThreads p11 "$PROFILER4_REALNAME" 2

	# Test symbol save and restore
	"$PROFILER1" 50 1 "$TMPDIR/p12" \|\| RegisterFailure
	"$PPROF" $PPROF_FLAGS "$PROFILER1_REALNAME" "$TMPDIR/p12" --raw \
	>"$TMPDIR/p13" 2>/dev/null \|\| RegisterFailure
	VerifyIdentical p12 "$PROFILER1_REALNAME" p13 "" \|\| RegisterFailure

	"$PROFILER3" 30 2 "$TMPDIR/p14" \|\| RegisterFailure
	"$PPROF" $PPROF_FLAGS "$PROFILER3_REALNAME" "$TMPDIR/p14" --raw \
	>"$TMPDIR/p15" 2>/dev/null \|\| RegisterFailure
	VerifyIdentical p14 "$PROFILER3_REALNAME" p15 "" \|\| RegisterFailure

	# Test using ITIMER_REAL instead of ITIMER_PROF.
	env CPUPROFILE_REALTIME=1 "$PROFILER3" 30 2 "$TMPDIR/p16" \|\| RegisterFailure
	env CPUPROFILE_REALTIME=1 "$PROFILER3" 60 2 "$TMPDIR/p17" \|\| RegisterFailure
	VerifySimilar p16 "$PROFILER3_REALNAME" p17 "$PROFILER3_REALNAME" 2


	# Make sure that when we have a process with a fork, the profiles don't
	# clobber each other
	CPUPROFILE="$TMPDIR/pfork" "$PROFILER1" 1 -2 \|\| RegisterFailure
	n=`ls $TMPDIR/pfork* \| wc -l`
	if [ $n != 3 ]; then
	echo "FORK test FAILED: expected 3 profiles (for main + 2 children), found $n"
	num_failures=`expr $num_failures + 1`
	fi

	rm -rf "$TMPDIR" # clean up

	echo "Tests finished with $num_failures failures"
	exit $num_failures