This directory contains the code for the transport security state generator, a tool that generates a C++ file based on preload data in transport_security_state_static.json. This JSON file contains the domain security policy configurations for all preloaded domains.
Website owners can set a number of security policies for their domains, usually by sending configuration in a HTTP header. Chromium supports preloading for some of these security policies so that users benefit from these policies regardless of their browsing history. Website owners can request preloading for their domains. Chromium supports preloading for the following domain security policies:
Chromium and most other browsers ship the preloaded configurations inside their binary. Chromium uses a custom data structure for this.
Please follow the instructions at hstspreload.org.
Please contact the list maintainers before you do.
The transport security state generator is executed during the build process (it may execute multiple times depending on the targets you're building) and generates data structures that are compiled into the binary. You can find the generated output in
Make sure you have build the
transport_security_state_generator <json-file> <pins-file> <template-file> <output-file> [--v=1]
The preload data is stored in the Chromium binary as a trie encoded in a byte array (
net::TransportSecurityStateSource::preloaded_data). The hostnames are stored in their canonicalized form and compressed using a Huffman coding. The generic decoder for preloaded Huffman encoded trie data is
PreloadDecoder and lives in
net/extras/preload_data/decoder.cc. The HSTS specific implementation is
DecodeHSTSPreload and lives in
A Huffman coding is calculated for all characters used in the trie (characters in hostnames and the
end of table and
terminal values). The Huffman tree can be rebuild from the
The (internal) nodes of the tree are encoded as pairs of uint8s. The last node in the array is the root of the tree. Each node is two uint8_t values, the first is “left” and the second is “right”. If a uint8_t value has the MSB set it is a leaf value and the 7 least significant bits represent a ASCII character (from the range 0-127, the tree does not support extended ASCII). If the MSB is not set it is a pointer to the n'th node in the array.
For example, the following uint8_t array
0xE1, 0xE2, 0xE3, 0x0, 0xE4, 0xE5, 0x1, 0x2
represents 9 elements:
When decoded this results in the following Huffman tree:
root (node 3) / \ node 1 node 2 / \ / \ 0xE3 (c) node 0 0xE4 (d) 0xE5 (e) / \ 0xE1 (a) 0xE2 (b)
The byte array containing the trie is made up of a set of nodes represented by dispatch tables. Each dispatch table contains a (possibly empty) shared prefix, a value, and zero or more pointers to child dispatch tables. The node value is an encoded entry and the associated hostname can be found by going up the trie.
The trie contains the hostnames in reverse and the hostnames are terminated by a
The dispatch table for the root node starts at bit position
The binary format for the trie is defined by the following ABNF.
trie = 1*dispatch-table dispatch-table = prefix-part ; a common prefix for the node and its children 1*value-part ; 1 or more values or pointers to children end-of-table-value ; signals the end of the table prefix-part = *%b1 ; 0 or more 1 bits indicating the prefix length %b0 ; 0 bit to indicate the end of the length encoding prefix-characters ; the actual prefix characters value-part = huffman-character node-value ; table with the node value and pointers to children node-value = node-entry ; preload entry for the hostname at this node / node-pointer ; a bit offset pointing to another dispatch ; table node-entry = preloaded-entry ; encoded preload configuration for one ; hostname (see section below) node-pointer = long-bit-offset / short-bit-offset long-bit-offset = %b1 ; 1 bit indicates long form will follow 4BIT ; 4 bit number indicating bit length of the offset 8*22BIT ; offset encoded as an n bit number (see above) ; where n is the offset length (see above) + 8 short-bit-offset = %b0 ; 0 bit indicates short form will follow 7BIT ; offset as a 7 bit number terminal-value = huffman-character ; ASCII value 0x00 encoded using Huffman end-of-table-value = huffman-character ; ASCII value 0x7F encoded using Huffman prefix-characters = *huffman-character huffman-character = 1*BIT
The entries are encoded using a variable length encoding. Each entry is made up of 4 parts, one for each supported policy. The length of these parts depends on the actual configuration, some field will be omitted in some cases.
The binary format for an entry is defined by the following ABNF.
preloaded-entry = BIT ; simple entry flag [hsts-part hpkp-part expect-ct-part] ; policy specific parts are only ; present when the simple entry flag ; is set to 0 and omitted otherwise hsts-part = include-subdomains ; HSTS includeSubdomains flag BIT ; whether to force HTTPS hpkp-part = BIT ; whether to enable pinning [pinset-id] ; only present when pinning is enabled [include-subdomains] ; HPKP includeSubdomains flag, only ; present when pinning is enabled and ; HSTS includeSubdomains is not used hpkp-pinset-id = array-index expect-ct-part = BIT ; whether to enable Expect-CT [report-uri-id] ; only present when Expect-CT is enabled report-uri-id = array-index include-subdomains = BIT array-index = 4BIT ; a 4 bit number
The array-index values are indices in the associated arrays:
net::TransportSecurityStateSource::expect_ct_report_urisfor Expect-CT's report-uri-id
The majority of entries on the preload list are submitted through hstspreload.org and share the same policy configuration (HSTS + includeSubdomains only). To safe space, these entries (called simple entries) use a shorter encoding where the first bit (simple entry flag) is set to 1 and the rest of the configuration is omitted.
The generator code has its own unittests in the
The encoder and decoder for the preload format life in different places and are tested by end-to-end tests (
net/http/transport_security_state_unittest.cc. The tests use their own preload lists, the data structures for these lists are generated in the same way as for the official Chromium list.
All these tests are part of the
net_unittests (except for
TransportSecurityStateStaticTest) should not depend on the real preload list. If you are writing tests that require a static transport security state use
transport_security_state_static_unittest_default.json instead. Tests can override the active preload list by calling