| // Copyright (c) 2012 The Chromium Authors. All rights reserved. |
| // Use of this source code is governed by a BSD-style license that can be |
| // found in the LICENSE file. |
| |
| // This file includes code SSLClientSocketNSS::DoVerifyCertComplete() derived |
| // from AuthCertificateCallback() in |
| // mozilla/security/manager/ssl/src/nsNSSCallbacks.cpp. |
| |
| /* ***** BEGIN LICENSE BLOCK ***** |
| * Version: MPL 1.1/GPL 2.0/LGPL 2.1 |
| * |
| * The contents of this file are subject to the Mozilla Public License Version |
| * 1.1 (the "License"); you may not use this file except in compliance with |
| * the License. You may obtain a copy of the License at |
| * http://www.mozilla.org/MPL/ |
| * |
| * Software distributed under the License is distributed on an "AS IS" basis, |
| * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License |
| * for the specific language governing rights and limitations under the |
| * License. |
| * |
| * The Original Code is the Netscape security libraries. |
| * |
| * The Initial Developer of the Original Code is |
| * Netscape Communications Corporation. |
| * Portions created by the Initial Developer are Copyright (C) 2000 |
| * the Initial Developer. All Rights Reserved. |
| * |
| * Contributor(s): |
| * Ian McGreer <mcgreer@netscape.com> |
| * Javier Delgadillo <javi@netscape.com> |
| * Kai Engert <kengert@redhat.com> |
| * |
| * Alternatively, the contents of this file may be used under the terms of |
| * either the GNU General Public License Version 2 or later (the "GPL"), or |
| * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), |
| * in which case the provisions of the GPL or the LGPL are applicable instead |
| * of those above. If you wish to allow use of your version of this file only |
| * under the terms of either the GPL or the LGPL, and not to allow others to |
| * use your version of this file under the terms of the MPL, indicate your |
| * decision by deleting the provisions above and replace them with the notice |
| * and other provisions required by the GPL or the LGPL. If you do not delete |
| * the provisions above, a recipient may use your version of this file under |
| * the terms of any one of the MPL, the GPL or the LGPL. |
| * |
| * ***** END LICENSE BLOCK ***** */ |
| |
| #include "net/socket/ssl_client_socket_nss.h" |
| |
| #include <certdb.h> |
| #include <hasht.h> |
| #include <keyhi.h> |
| #include <nspr.h> |
| #include <nss.h> |
| #include <ocsp.h> |
| #include <pk11pub.h> |
| #include <secerr.h> |
| #include <sechash.h> |
| #include <ssl.h> |
| #include <sslerr.h> |
| #include <sslproto.h> |
| |
| #include <algorithm> |
| #include <limits> |
| #include <map> |
| #include <utility> |
| |
| #include "base/bind.h" |
| #include "base/bind_helpers.h" |
| #include "base/callback_helpers.h" |
| #include "base/compiler_specific.h" |
| #include "base/location.h" |
| #include "base/logging.h" |
| #include "base/macros.h" |
| #include "base/metrics/histogram_macros.h" |
| #include "base/single_thread_task_runner.h" |
| #include "base/stl_util.h" |
| #include "base/strings/string_number_conversions.h" |
| #include "base/strings/string_util.h" |
| #include "base/strings/stringprintf.h" |
| #include "base/thread_task_runner_handle.h" |
| #include "base/threading/thread_restrictions.h" |
| #include "base/values.h" |
| #include "crypto/ec_private_key.h" |
| #include "crypto/nss_util.h" |
| #include "crypto/nss_util_internal.h" |
| #include "crypto/rsa_private_key.h" |
| #include "crypto/scoped_nss_types.h" |
| #include "net/base/address_list.h" |
| #include "net/base/io_buffer.h" |
| #include "net/base/net_errors.h" |
| #include "net/base/sockaddr_storage.h" |
| #include "net/cert/asn1_util.h" |
| #include "net/cert/cert_status_flags.h" |
| #include "net/cert/cert_verifier.h" |
| #include "net/cert/ct_ev_whitelist.h" |
| #include "net/cert/ct_policy_enforcer.h" |
| #include "net/cert/ct_verifier.h" |
| #include "net/cert/ct_verify_result.h" |
| #include "net/cert/scoped_nss_types.h" |
| #include "net/cert/sct_status_flags.h" |
| #include "net/cert/x509_certificate_net_log_param.h" |
| #include "net/cert/x509_util.h" |
| #include "net/cert_net/nss_ocsp.h" |
| #include "net/dns/dns_util.h" |
| #include "net/http/transport_security_state.h" |
| #include "net/log/net_log.h" |
| #include "net/socket/client_socket_handle.h" |
| #include "net/socket/nss_ssl_util.h" |
| #include "net/ssl/ssl_cert_request_info.h" |
| #include "net/ssl/ssl_cipher_suite_names.h" |
| #include "net/ssl/ssl_connection_status_flags.h" |
| #include "net/ssl/ssl_failure_state.h" |
| #include "net/ssl/ssl_info.h" |
| |
| #if defined(USE_NSS_CERTS) |
| #include <dlfcn.h> |
| #endif |
| |
| namespace net { |
| |
| // State machines are easier to debug if you log state transitions. |
| // Enable these if you want to see what's going on. |
| #if 1 |
| #define EnterFunction(x) |
| #define LeaveFunction(x) |
| #define GotoState(s) next_handshake_state_ = s |
| #else |
| #define EnterFunction(x)\ |
| VLOG(1) << (void *)this << " " << __FUNCTION__ << " enter " << x\ |
| << "; next_handshake_state " << next_handshake_state_ |
| #define LeaveFunction(x)\ |
| VLOG(1) << (void *)this << " " << __FUNCTION__ << " leave " << x\ |
| << "; next_handshake_state " << next_handshake_state_ |
| #define GotoState(s)\ |
| do {\ |
| VLOG(1) << (void *)this << " " << __FUNCTION__ << " jump to state " << s;\ |
| next_handshake_state_ = s;\ |
| } while (0) |
| #endif |
| |
| namespace { |
| |
| // SSL plaintext fragments are shorter than 16KB. Although the record layer |
| // overhead is allowed to be 2K + 5 bytes, in practice the overhead is much |
| // smaller than 1KB. So a 17KB buffer should be large enough to hold an |
| // entire SSL record. |
| const int kRecvBufferSize = 17 * 1024; |
| const int kSendBufferSize = 17 * 1024; |
| |
| // Used by SSLClientSocketNSS::Core to indicate there is no read result |
| // obtained by a previous operation waiting to be returned to the caller. |
| // This constant can be any non-negative/non-zero value (eg: it does not |
| // overlap with any value of the net::Error range, including net::OK). |
| const int kNoPendingReadResult = 1; |
| |
| // Helper functions to make it possible to log events from within the |
| // SSLClientSocketNSS::Core. |
| void AddLogEvent(const base::WeakPtr<BoundNetLog>& net_log, |
| NetLog::EventType event_type) { |
| if (!net_log) |
| return; |
| net_log->AddEvent(event_type); |
| } |
| |
| // Helper function to make it possible to log events from within the |
| // SSLClientSocketNSS::Core. |
| void AddLogEventWithCallback(const base::WeakPtr<BoundNetLog>& net_log, |
| NetLog::EventType event_type, |
| const NetLog::ParametersCallback& callback) { |
| if (!net_log) |
| return; |
| net_log->AddEvent(event_type, callback); |
| } |
| |
| // Helper function to make it easier to call BoundNetLog::AddByteTransferEvent |
| // from within the SSLClientSocketNSS::Core. |
| // AddByteTransferEvent expects to receive a const char*, which within the |
| // Core is backed by an IOBuffer. If the "const char*" is bound via |
| // base::Bind and posted to another thread, and the IOBuffer that backs that |
| // pointer then goes out of scope on the origin thread, this would result in |
| // an invalid read of a stale pointer. |
| // Instead, provide a signature that accepts an IOBuffer*, so that a reference |
| // to the owning IOBuffer can be bound to the Callback. This ensures that the |
| // IOBuffer will stay alive long enough to cross threads if needed. |
| void LogByteTransferEvent( |
| const base::WeakPtr<BoundNetLog>& net_log, NetLog::EventType event_type, |
| int len, IOBuffer* buffer) { |
| if (!net_log) |
| return; |
| net_log->AddByteTransferEvent(event_type, len, buffer->data()); |
| } |
| |
| // PeerCertificateChain is a helper object which extracts the certificate |
| // chain, as given by the server, from an NSS socket and performs the needed |
| // resource management. The first element of the chain is the leaf certificate |
| // and the other elements are in the order given by the server. |
| class PeerCertificateChain { |
| public: |
| PeerCertificateChain() {} |
| PeerCertificateChain(const PeerCertificateChain& other); |
| ~PeerCertificateChain(); |
| PeerCertificateChain& operator=(const PeerCertificateChain& other); |
| |
| // Resets the current chain, freeing any resources, and updates the current |
| // chain to be a copy of the chain stored in |nss_fd|. |
| // If |nss_fd| is NULL, then the current certificate chain will be freed. |
| void Reset(PRFileDesc* nss_fd); |
| |
| // Returns the current certificate chain as a vector of DER-encoded |
| // base::StringPieces. The returned vector remains valid until Reset is |
| // called. |
| std::vector<base::StringPiece> AsStringPieceVector() const; |
| |
| bool empty() const { return certs_.empty(); } |
| |
| CERTCertificate* operator[](size_t index) const { |
| DCHECK_LT(index, certs_.size()); |
| return certs_[index]; |
| } |
| |
| private: |
| std::vector<CERTCertificate*> certs_; |
| }; |
| |
| PeerCertificateChain::PeerCertificateChain( |
| const PeerCertificateChain& other) { |
| *this = other; |
| } |
| |
| PeerCertificateChain::~PeerCertificateChain() { |
| Reset(NULL); |
| } |
| |
| PeerCertificateChain& PeerCertificateChain::operator=( |
| const PeerCertificateChain& other) { |
| if (this == &other) |
| return *this; |
| |
| Reset(NULL); |
| certs_.reserve(other.certs_.size()); |
| for (size_t i = 0; i < other.certs_.size(); ++i) |
| certs_.push_back(CERT_DupCertificate(other.certs_[i])); |
| |
| return *this; |
| } |
| |
| void PeerCertificateChain::Reset(PRFileDesc* nss_fd) { |
| for (size_t i = 0; i < certs_.size(); ++i) |
| CERT_DestroyCertificate(certs_[i]); |
| certs_.clear(); |
| |
| if (nss_fd == NULL) |
| return; |
| |
| CERTCertList* list = SSL_PeerCertificateChain(nss_fd); |
| // The handshake on |nss_fd| may not have completed. |
| if (list == NULL) |
| return; |
| |
| for (CERTCertListNode* node = CERT_LIST_HEAD(list); |
| !CERT_LIST_END(node, list); node = CERT_LIST_NEXT(node)) { |
| certs_.push_back(CERT_DupCertificate(node->cert)); |
| } |
| CERT_DestroyCertList(list); |
| } |
| |
| std::vector<base::StringPiece> |
| PeerCertificateChain::AsStringPieceVector() const { |
| std::vector<base::StringPiece> v(certs_.size()); |
| for (unsigned i = 0; i < certs_.size(); i++) { |
| v[i] = base::StringPiece( |
| reinterpret_cast<const char*>(certs_[i]->derCert.data), |
| certs_[i]->derCert.len); |
| } |
| |
| return v; |
| } |
| |
| // HandshakeState is a helper struct used to pass handshake state between |
| // the NSS task runner and the network task runner. |
| // |
| // It contains members that may be read or written on the NSS task runner, |
| // but which also need to be read from the network task runner. The NSS task |
| // runner will notify the network task runner whenever this state changes, so |
| // that the network task runner can safely make a copy, which avoids the need |
| // for locking. |
| struct HandshakeState { |
| HandshakeState() { Reset(); } |
| |
| void Reset() { |
| next_proto_status = SSLClientSocket::kNextProtoUnsupported; |
| next_proto.clear(); |
| negotiation_extension_ = SSLClientSocket::kExtensionUnknown; |
| channel_id_sent = false; |
| server_cert_chain.Reset(NULL); |
| server_cert = NULL; |
| sct_list_from_tls_extension.clear(); |
| stapled_ocsp_response.clear(); |
| resumed_handshake = false; |
| ssl_connection_status = 0; |
| } |
| |
| // Set to kNextProtoNegotiated if NPN was successfully negotiated, with the |
| // negotiated protocol stored in |next_proto|. |
| SSLClientSocket::NextProtoStatus next_proto_status; |
| std::string next_proto; |
| |
| // TLS extension used for protocol negotiation. |
| SSLClientSocket::SSLNegotiationExtension negotiation_extension_; |
| |
| // True if a channel ID was sent. |
| bool channel_id_sent; |
| |
| // List of DER-encoded X.509 DistinguishedName of certificate authorities |
| // allowed by the server. |
| std::vector<std::string> cert_authorities; |
| |
| // Set when the handshake fully completes. |
| // |
| // The server certificate is first received from NSS as an NSS certificate |
| // chain (|server_cert_chain|) and then converted into a platform-specific |
| // X509Certificate object (|server_cert|). It's possible for some |
| // certificates to be successfully parsed by NSS, and not by the platform |
| // libraries (i.e.: when running within a sandbox, different parsing |
| // algorithms, etc), so it's not safe to assume that |server_cert| will |
| // always be non-NULL. |
| PeerCertificateChain server_cert_chain; |
| scoped_refptr<X509Certificate> server_cert; |
| // SignedCertificateTimestampList received via TLS extension (RFC 6962). |
| std::string sct_list_from_tls_extension; |
| // Stapled OCSP response received. |
| std::string stapled_ocsp_response; |
| |
| // True if the current handshake was the result of TLS session resumption. |
| bool resumed_handshake; |
| |
| // The negotiated security parameters (TLS version, cipher, extensions) of |
| // the SSL connection. |
| int ssl_connection_status; |
| }; |
| |
| // Client-side error mapping functions. |
| |
| // Map NSS error code to network error code. |
| int MapNSSClientError(PRErrorCode err) { |
| switch (err) { |
| case SSL_ERROR_BAD_CERT_ALERT: |
| case SSL_ERROR_UNSUPPORTED_CERT_ALERT: |
| case SSL_ERROR_REVOKED_CERT_ALERT: |
| case SSL_ERROR_EXPIRED_CERT_ALERT: |
| case SSL_ERROR_CERTIFICATE_UNKNOWN_ALERT: |
| case SSL_ERROR_UNKNOWN_CA_ALERT: |
| case SSL_ERROR_ACCESS_DENIED_ALERT: |
| return ERR_BAD_SSL_CLIENT_AUTH_CERT; |
| default: |
| return MapNSSError(err); |
| } |
| } |
| |
| } // namespace |
| |
| // SSLClientSocketNSS::Core provides a thread-safe, ref-counted core that is |
| // able to marshal data between NSS functions and an underlying transport |
| // socket. |
| // |
| // All public functions are meant to be called from the network task runner, |
| // and any callbacks supplied will be invoked there as well, provided that |
| // Detach() has not been called yet. |
| // |
| ///////////////////////////////////////////////////////////////////////////// |
| // |
| // Threading within SSLClientSocketNSS and SSLClientSocketNSS::Core: |
| // |
| // Because NSS may block on either hardware or user input during operations |
| // such as signing, creating certificates, or locating private keys, the Core |
| // handles all of the interactions with the underlying NSS SSL socket, so |
| // that these blocking calls can be executed on a dedicated task runner. |
| // |
| // Note that the network task runner and the NSS task runner may be executing |
| // on the same thread. If that happens, then it's more performant to try to |
| // complete as much work as possible synchronously, even if it might block, |
| // rather than continually PostTask-ing to the same thread. |
| // |
| // Because NSS functions should only be called on the NSS task runner, while |
| // I/O resources should only be accessed on the network task runner, most |
| // public functions are implemented via three methods, each with different |
| // task runner affinities. |
| // |
| // In the single-threaded mode (where the network and NSS task runners run on |
| // the same thread), these are all attempted synchronously, while in the |
| // multi-threaded mode, message passing is used. |
| // |
| // 1) NSS Task Runner: Execute NSS function (DoPayloadRead, DoPayloadWrite, |
| // DoHandshake) |
| // 2) NSS Task Runner: Prepare data to go from NSS to an IO function: |
| // (BufferRecv, BufferSend) |
| // 3) Network Task Runner: Perform IO on that data (DoBufferRecv, |
| // DoBufferSend, DoGetChannelID, OnGetChannelIDComplete) |
| // 4) Both Task Runners: Callback for asynchronous completion or to marshal |
| // data from the network task runner back to NSS (BufferRecvComplete, |
| // BufferSendComplete, OnHandshakeIOComplete) |
| // |
| ///////////////////////////////////////////////////////////////////////////// |
| // Single-threaded example |
| // |
| // |--------------------------Network Task Runner--------------------------| |
| // SSLClientSocketNSS Core (Transport Socket) |
| // Read() |
| // |-------------------------V |
| // Read() |
| // | |
| // DoPayloadRead() |
| // | |
| // BufferRecv() |
| // | |
| // DoBufferRecv() |
| // |-------------------------V |
| // Read() |
| // V-------------------------| |
| // BufferRecvComplete() |
| // | |
| // PostOrRunCallback() |
| // V-------------------------| |
| // (Read Callback) |
| // |
| ///////////////////////////////////////////////////////////////////////////// |
| // Multi-threaded example: |
| // |
| // |--------------------Network Task Runner-------------|--NSS Task Runner--| |
| // SSLClientSocketNSS Core Socket Core |
| // Read() |
| // |---------------------V |
| // Read() |
| // |-------------------------------V |
| // Read() |
| // | |
| // DoPayloadRead() |
| // | |
| // BufferRecv |
| // V-------------------------------| |
| // DoBufferRecv |
| // |----------------V |
| // Read() |
| // V----------------| |
| // BufferRecvComplete() |
| // |-------------------------------V |
| // BufferRecvComplete() |
| // | |
| // PostOrRunCallback() |
| // V-------------------------------| |
| // PostOrRunCallback() |
| // V---------------------| |
| // (Read Callback) |
| // |
| ///////////////////////////////////////////////////////////////////////////// |
| class SSLClientSocketNSS::Core : public base::RefCountedThreadSafe<Core> { |
| public: |
| // Creates a new Core. |
| // |
| // Any calls to NSS are executed on the |nss_task_runner|, while any calls |
| // that need to operate on the underlying transport, net log, or server |
| // bound certificate fetching will happen on the |network_task_runner|, so |
| // that their lifetimes match that of the owning SSLClientSocketNSS. |
| // |
| // The caller retains ownership of |transport|, |net_log|, and |
| // |channel_id_service|, and they will not be accessed once Detach() |
| // has been called. |
| Core(base::SequencedTaskRunner* network_task_runner, |
| base::SequencedTaskRunner* nss_task_runner, |
| ClientSocketHandle* transport, |
| const HostPortPair& host_and_port, |
| const SSLConfig& ssl_config, |
| BoundNetLog* net_log, |
| ChannelIDService* channel_id_service); |
| |
| // Called on the network task runner. |
| // Transfers ownership of |socket|, an NSS SSL socket, and |buffers|, the |
| // underlying memio implementation, to the Core. Returns true if the Core |
| // was successfully registered with the socket. |
| bool Init(PRFileDesc* socket, memio_Private* buffers); |
| |
| // Called on the network task runner. |
| // |
| // Attempts to perform an SSL handshake. If the handshake cannot be |
| // completed synchronously, returns ERR_IO_PENDING, invoking |callback| on |
| // the network task runner once the handshake has completed. Otherwise, |
| // returns OK on success or a network error code on failure. |
| int Connect(const CompletionCallback& callback); |
| |
| // Called on the network task runner. |
| // Signals that the resources owned by the network task runner are going |
| // away. No further callbacks will be invoked on the network task runner. |
| // May be called at any time. |
| void Detach(); |
| |
| // Called on the network task runner. |
| // Returns the current state of the underlying SSL socket. May be called at |
| // any time. |
| const HandshakeState& state() const { return network_handshake_state_; } |
| |
| // Called on the network task runner. |
| // Read() and Write() mirror the net::Socket functions of the same name. |
| // If ERR_IO_PENDING is returned, |callback| will be invoked on the network |
| // task runner at a later point, unless the caller calls Detach(). |
| int Read(IOBuffer* buf, int buf_len, const CompletionCallback& callback); |
| int Write(IOBuffer* buf, int buf_len, const CompletionCallback& callback); |
| |
| // Called on the network task runner. |
| bool IsConnected() const; |
| bool HasPendingAsyncOperation() const; |
| bool HasUnhandledReceivedData() const; |
| bool WasEverUsed() const; |
| |
| // Called on the network task runner. |
| // Causes the associated SSL/TLS session ID to be added to NSS's session |
| // cache, but only if the connection has not been False Started. |
| // |
| // This should only be called after the server's certificate has been |
| // verified, and may not be called within an NSS callback. |
| void CacheSessionIfNecessary(); |
| |
| private: |
| friend class base::RefCountedThreadSafe<Core>; |
| ~Core(); |
| |
| enum State { |
| STATE_NONE, |
| STATE_HANDSHAKE, |
| STATE_GET_DOMAIN_BOUND_CERT_COMPLETE, |
| }; |
| |
| bool OnNSSTaskRunner() const; |
| bool OnNetworkTaskRunner() const; |
| |
| //////////////////////////////////////////////////////////////////////////// |
| // Methods that are ONLY called on the NSS task runner: |
| //////////////////////////////////////////////////////////////////////////// |
| |
| // Called by NSS during full handshakes to allow the application to |
| // verify the certificate. Instead of verifying the certificate in the midst |
| // of the handshake, SECSuccess is always returned and the peer's certificate |
| // is verified afterwards. |
| // This behaviour is an artifact of the original SSLClientSocketWin |
| // implementation, which could not verify the peer's certificate until after |
| // the handshake had completed, as well as bugs in NSS that prevent |
| // SSL_RestartHandshakeAfterCertReq from working. |
| static SECStatus OwnAuthCertHandler(void* arg, |
| PRFileDesc* socket, |
| PRBool checksig, |
| PRBool is_server); |
| |
| // Callbacks called by NSS when the peer requests client certificate |
| // authentication. |
| // See the documentation in third_party/nss/ssl/ssl.h for the meanings of |
| // the arguments. |
| static SECStatus ClientAuthHandler(void* arg, |
| PRFileDesc* socket, |
| CERTDistNames* ca_names, |
| CERTCertificate** result_certificate, |
| SECKEYPrivateKey** result_private_key); |
| |
| // Called by NSS to determine if we can False Start. |
| // |arg| contains a pointer to the current SSLClientSocketNSS::Core. |
| static SECStatus CanFalseStartCallback(PRFileDesc* socket, |
| void* arg, |
| PRBool* can_false_start); |
| |
| // Called by NSS each time a handshake completely finishes. |
| // |arg| contains a pointer to the current SSLClientSocketNSS::Core. |
| static void HandshakeCallback(PRFileDesc* socket, void* arg); |
| |
| // Called once for each successful handshake. If the initial handshake false |
| // starts, it is called when it false starts and not when it completely |
| // finishes. is_initial is true if this is the initial handshake. |
| void HandshakeSucceeded(bool is_initial); |
| |
| // Handles an NSS error generated while handshaking or performing IO. |
| // Returns a network error code mapped from the original NSS error. |
| int HandleNSSError(PRErrorCode error); |
| |
| int DoHandshakeLoop(int last_io_result); |
| int DoReadLoop(int result); |
| int DoWriteLoop(int result); |
| |
| int DoHandshake(); |
| int DoGetDBCertComplete(int result); |
| |
| int DoPayloadRead(); |
| int DoPayloadWrite(); |
| |
| bool DoTransportIO(); |
| int BufferRecv(); |
| int BufferSend(); |
| |
| void OnRecvComplete(int result); |
| void OnSendComplete(int result); |
| |
| void DoConnectCallback(int result); |
| void DoReadCallback(int result); |
| void DoWriteCallback(int result); |
| |
| // Client channel ID handler. |
| static SECStatus ClientChannelIDHandler( |
| void* arg, |
| PRFileDesc* socket, |
| SECKEYPublicKey **out_public_key, |
| SECKEYPrivateKey **out_private_key); |
| |
| // ImportChannelIDKeys is a helper function for turning a DER-encoded cert and |
| // key into a SECKEYPublicKey and SECKEYPrivateKey. Returns OK upon success |
| // and an error code otherwise. |
| // Requires |domain_bound_private_key_| and |domain_bound_cert_| to have been |
| // set by a call to ChannelIDService->GetChannelID. The caller |
| // takes ownership of the |*cert| and |*key|. |
| int ImportChannelIDKeys(SECKEYPublicKey** public_key, SECKEYPrivateKey** key); |
| |
| // Updates the NSS and platform specific certificates. |
| void UpdateServerCert(); |
| // Update the nss_handshake_state_ with the SignedCertificateTimestampList |
| // received in the handshake via a TLS extension. |
| void UpdateSignedCertTimestamps(); |
| // Update the OCSP response cache with the stapled response received in the |
| // handshake, and update nss_handshake_state_ with |
| // the SignedCertificateTimestampList received in the stapled OCSP response. |
| void UpdateStapledOCSPResponse(); |
| // Updates the nss_handshake_state_ with the negotiated security parameters. |
| void UpdateConnectionStatus(); |
| // Record histograms for channel id support during full handshakes - resumed |
| // handshakes are ignored. |
| void RecordChannelIDSupportOnNSSTaskRunner(); |
| // UpdateNextProto gets any application-layer protocol that may have been |
| // negotiated by the TLS connection. |
| void UpdateNextProto(); |
| // Record TLS extension used for protocol negotiation (NPN or ALPN). |
| void UpdateExtensionUsed(); |
| |
| // Returns true if renegotiations are allowed. |
| bool IsRenegotiationAllowed() const; |
| |
| //////////////////////////////////////////////////////////////////////////// |
| // Methods that are ONLY called on the network task runner: |
| //////////////////////////////////////////////////////////////////////////// |
| int DoBufferRecv(IOBuffer* buffer, int len); |
| int DoBufferSend(IOBuffer* buffer, int len); |
| int DoGetChannelID(const std::string& host); |
| |
| void OnGetChannelIDComplete(int result); |
| void OnHandshakeStateUpdated(const HandshakeState& state); |
| void OnNSSBufferUpdated(int amount_in_read_buffer); |
| void DidNSSRead(int result); |
| void DidNSSWrite(int result); |
| void RecordChannelIDSupportOnNetworkTaskRunner(bool negotiated_channel_id, |
| bool channel_id_enabled) const; |
| |
| //////////////////////////////////////////////////////////////////////////// |
| // Methods that are called on both the network task runner and the NSS |
| // task runner. |
| //////////////////////////////////////////////////////////////////////////// |
| void OnHandshakeIOComplete(int result); |
| void BufferRecvComplete(IOBuffer* buffer, int result); |
| void BufferSendComplete(int result); |
| |
| // PostOrRunCallback is a helper function to ensure that |callback| is |
| // invoked on the network task runner, but only if Detach() has not yet |
| // been called. |
| void PostOrRunCallback(const tracked_objects::Location& location, |
| const base::Closure& callback); |
| |
| // Uses PostOrRunCallback and |weak_net_log_| to try and log a |
| // SSL_CLIENT_CERT_PROVIDED event, with the indicated count. |
| void AddCertProvidedEvent(int cert_count); |
| |
| // Sets the handshake state |channel_id_sent| flag and logs the |
| // SSL_CHANNEL_ID_PROVIDED event. |
| void SetChannelIDProvided(); |
| |
| //////////////////////////////////////////////////////////////////////////// |
| // Members that are ONLY accessed on the network task runner: |
| //////////////////////////////////////////////////////////////////////////// |
| |
| // True if the owning SSLClientSocketNSS has called Detach(). No further |
| // callbacks will be invoked nor access to members owned by the network |
| // task runner. |
| bool detached_; |
| |
| // The underlying transport to use for network IO. |
| ClientSocketHandle* transport_; |
| base::WeakPtrFactory<BoundNetLog> weak_net_log_factory_; |
| |
| // The current handshake state. Mirrors |nss_handshake_state_|. |
| HandshakeState network_handshake_state_; |
| |
| // The service for retrieving Channel ID keys. May be NULL. |
| ChannelIDService* channel_id_service_; |
| ChannelIDService::Request channel_id_request_; |
| |
| // The information about NSS task runner. |
| int unhandled_buffer_size_; |
| bool nss_waiting_read_; |
| bool nss_waiting_write_; |
| bool nss_is_closed_; |
| |
| // Set when Read() or Write() successfully reads or writes data to or from the |
| // network. |
| bool was_ever_used_; |
| |
| //////////////////////////////////////////////////////////////////////////// |
| // Members that are ONLY accessed on the NSS task runner: |
| //////////////////////////////////////////////////////////////////////////// |
| HostPortPair host_and_port_; |
| SSLConfig ssl_config_; |
| |
| // NSS SSL socket. |
| PRFileDesc* nss_fd_; |
| |
| // Buffers for the network end of the SSL state machine |
| memio_Private* nss_bufs_; |
| |
| // Used by DoPayloadRead() when attempting to fill the caller's buffer with |
| // as much data as possible, without blocking. |
| // If DoPayloadRead() encounters an error after having read some data, stores |
| // the results to return on the *next* call to DoPayloadRead(). A value of |
| // kNoPendingReadResult indicates there is no pending result, otherwise 0 |
| // indicates EOF and < 0 indicates an error. |
| int pending_read_result_; |
| // Contains the previously observed NSS error. Only valid when |
| // pending_read_result_ != kNoPendingReadResult. |
| PRErrorCode pending_read_nss_error_; |
| |
| // The certificate chain, in DER form, that is expected to be received from |
| // the server. |
| std::vector<std::string> predicted_certs_; |
| |
| State next_handshake_state_; |
| |
| // True if channel ID extension was negotiated. |
| bool channel_id_xtn_negotiated_; |
| // True if the handshake state machine was interrupted for channel ID. |
| bool channel_id_needed_; |
| // True if the handshake state machine was interrupted for client auth. |
| bool client_auth_cert_needed_; |
| // True if NSS has False Started in the initial handshake, but the initial |
| // handshake has not yet completely finished.. |
| bool false_started_; |
| // True if NSS has called HandshakeCallback. |
| bool handshake_callback_called_; |
| |
| HandshakeState nss_handshake_state_; |
| |
| bool transport_recv_busy_; |
| bool transport_recv_eof_; |
| bool transport_send_busy_; |
| |
| // Used by Read function. |
| scoped_refptr<IOBuffer> user_read_buf_; |
| int user_read_buf_len_; |
| |
| // Used by Write function. |
| scoped_refptr<IOBuffer> user_write_buf_; |
| int user_write_buf_len_; |
| |
| CompletionCallback user_connect_callback_; |
| CompletionCallback user_read_callback_; |
| CompletionCallback user_write_callback_; |
| |
| //////////////////////////////////////////////////////////////////////////// |
| // Members that are accessed on both the network task runner and the NSS |
| // task runner. |
| //////////////////////////////////////////////////////////////////////////// |
| scoped_refptr<base::SequencedTaskRunner> network_task_runner_; |
| scoped_refptr<base::SequencedTaskRunner> nss_task_runner_; |
| |
| // Dereferenced only on the network task runner, but bound to tasks destined |
| // for the network task runner from the NSS task runner. |
| base::WeakPtr<BoundNetLog> weak_net_log_; |
| |
| // Written on the network task runner by the |channel_id_service_|, |
| // prior to invoking OnHandshakeIOComplete. |
| // Read on the NSS task runner when once OnHandshakeIOComplete is invoked |
| // on the NSS task runner. |
| scoped_ptr<crypto::ECPrivateKey> channel_id_key_; |
| |
| DISALLOW_COPY_AND_ASSIGN(Core); |
| }; |
| |
| SSLClientSocketNSS::Core::Core( |
| base::SequencedTaskRunner* network_task_runner, |
| base::SequencedTaskRunner* nss_task_runner, |
| ClientSocketHandle* transport, |
| const HostPortPair& host_and_port, |
| const SSLConfig& ssl_config, |
| BoundNetLog* net_log, |
| ChannelIDService* channel_id_service) |
| : detached_(false), |
| transport_(transport), |
| weak_net_log_factory_(net_log), |
| channel_id_service_(channel_id_service), |
| unhandled_buffer_size_(0), |
| nss_waiting_read_(false), |
| nss_waiting_write_(false), |
| nss_is_closed_(false), |
| was_ever_used_(false), |
| host_and_port_(host_and_port), |
| ssl_config_(ssl_config), |
| nss_fd_(NULL), |
| nss_bufs_(NULL), |
| pending_read_result_(kNoPendingReadResult), |
| pending_read_nss_error_(0), |
| next_handshake_state_(STATE_NONE), |
| channel_id_xtn_negotiated_(false), |
| channel_id_needed_(false), |
| client_auth_cert_needed_(false), |
| false_started_(false), |
| handshake_callback_called_(false), |
| transport_recv_busy_(false), |
| transport_recv_eof_(false), |
| transport_send_busy_(false), |
| user_read_buf_len_(0), |
| user_write_buf_len_(0), |
| network_task_runner_(network_task_runner), |
| nss_task_runner_(nss_task_runner), |
| weak_net_log_(weak_net_log_factory_.GetWeakPtr()) { |
| } |
| |
| SSLClientSocketNSS::Core::~Core() { |
| // TODO(wtc): Send SSL close_notify alert. |
| if (nss_fd_ != NULL) { |
| PR_Close(nss_fd_); |
| nss_fd_ = NULL; |
| } |
| nss_bufs_ = NULL; |
| } |
| |
| bool SSLClientSocketNSS::Core::Init(PRFileDesc* socket, |
| memio_Private* buffers) { |
| DCHECK(OnNetworkTaskRunner()); |
| DCHECK(!nss_fd_); |
| DCHECK(!nss_bufs_); |
| |
| nss_fd_ = socket; |
| nss_bufs_ = buffers; |
| |
| SECStatus rv = SECSuccess; |
| |
| if (!ssl_config_.alpn_protos.empty()) { |
| NextProtoVector alpn_protos = ssl_config_.alpn_protos; |
| // TODO(bnc): Check ssl_config_.disabled_cipher_suites. |
| if (!IsTLSVersionAdequateForHTTP2(ssl_config_)) |
| DisableHTTP2(&alpn_protos); |
| // |ssl_config_| has fallback protocol at the end of the list, but NSS |
| // expects fallback at the first place, thus protocols need to be reordered. |
| ReorderNextProtos(&alpn_protos); |
| // NSS only supports a single protocol vector to be used with ALPN and NPN. |
| // Because of this limitation, |alpn_prototos| will be used for both. |
| // However, it is possible to enable ALPN and NPN separately. |
| std::vector<uint8_t> wire_protos = SerializeNextProtos(alpn_protos); |
| rv = SSL_SetNextProtoNego( |
| nss_fd_, wire_protos.empty() ? NULL : &wire_protos[0], |
| wire_protos.size()); |
| if (rv != SECSuccess) |
| LogFailedNSSFunction(*weak_net_log_, "SSL_SetNextProtoNego", ""); |
| rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_ALPN, PR_TRUE); |
| if (rv != SECSuccess) |
| LogFailedNSSFunction(*weak_net_log_, "SSL_OptionSet", "SSL_ENABLE_ALPN"); |
| if (!ssl_config_.npn_protos.empty()) { |
| rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_NPN, PR_TRUE); |
| if (rv != SECSuccess) |
| LogFailedNSSFunction(*weak_net_log_, "SSL_OptionSet", "SSL_ENABLE_NPN"); |
| } |
| } |
| |
| rv = SSL_AuthCertificateHook( |
| nss_fd_, SSLClientSocketNSS::Core::OwnAuthCertHandler, this); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(*weak_net_log_, "SSL_AuthCertificateHook", ""); |
| return false; |
| } |
| |
| rv = SSL_GetClientAuthDataHook( |
| nss_fd_, SSLClientSocketNSS::Core::ClientAuthHandler, this); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(*weak_net_log_, "SSL_GetClientAuthDataHook", ""); |
| return false; |
| } |
| |
| if (IsChannelIDEnabled(ssl_config_, channel_id_service_)) { |
| rv = SSL_SetClientChannelIDCallback( |
| nss_fd_, SSLClientSocketNSS::Core::ClientChannelIDHandler, this); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction( |
| *weak_net_log_, "SSL_SetClientChannelIDCallback", ""); |
| } |
| } |
| |
| rv = SSL_SetCanFalseStartCallback( |
| nss_fd_, SSLClientSocketNSS::Core::CanFalseStartCallback, this); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(*weak_net_log_, "SSL_SetCanFalseStartCallback", ""); |
| return false; |
| } |
| |
| rv = SSL_HandshakeCallback( |
| nss_fd_, SSLClientSocketNSS::Core::HandshakeCallback, this); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(*weak_net_log_, "SSL_HandshakeCallback", ""); |
| return false; |
| } |
| |
| return true; |
| } |
| |
| int SSLClientSocketNSS::Core::Connect(const CompletionCallback& callback) { |
| if (!OnNSSTaskRunner()) { |
| DCHECK(!detached_); |
| bool posted = nss_task_runner_->PostTask( |
| FROM_HERE, |
| base::Bind(IgnoreResult(&Core::Connect), this, callback)); |
| return posted ? ERR_IO_PENDING : ERR_ABORTED; |
| } |
| |
| DCHECK(OnNSSTaskRunner()); |
| DCHECK_EQ(STATE_NONE, next_handshake_state_); |
| DCHECK(user_read_callback_.is_null()); |
| DCHECK(user_write_callback_.is_null()); |
| DCHECK(user_connect_callback_.is_null()); |
| DCHECK(!user_read_buf_.get()); |
| DCHECK(!user_write_buf_.get()); |
| |
| next_handshake_state_ = STATE_HANDSHAKE; |
| int rv = DoHandshakeLoop(OK); |
| if (rv == ERR_IO_PENDING) { |
| user_connect_callback_ = callback; |
| } else if (rv > OK) { |
| rv = OK; |
| } |
| if (rv != ERR_IO_PENDING && !OnNetworkTaskRunner()) { |
| PostOrRunCallback(FROM_HERE, base::Bind(callback, rv)); |
| return ERR_IO_PENDING; |
| } |
| |
| return rv; |
| } |
| |
| void SSLClientSocketNSS::Core::Detach() { |
| DCHECK(OnNetworkTaskRunner()); |
| |
| detached_ = true; |
| transport_ = NULL; |
| weak_net_log_factory_.InvalidateWeakPtrs(); |
| |
| network_handshake_state_.Reset(); |
| |
| channel_id_request_.Cancel(); |
| } |
| |
| int SSLClientSocketNSS::Core::Read(IOBuffer* buf, int buf_len, |
| const CompletionCallback& callback) { |
| if (!OnNSSTaskRunner()) { |
| DCHECK(OnNetworkTaskRunner()); |
| DCHECK(!detached_); |
| DCHECK(transport_); |
| DCHECK(!nss_waiting_read_); |
| |
| nss_waiting_read_ = true; |
| bool posted = nss_task_runner_->PostTask( |
| FROM_HERE, |
| base::Bind(IgnoreResult(&Core::Read), this, make_scoped_refptr(buf), |
| buf_len, callback)); |
| if (!posted) { |
| nss_is_closed_ = true; |
| nss_waiting_read_ = false; |
| } |
| return posted ? ERR_IO_PENDING : ERR_ABORTED; |
| } |
| |
| DCHECK(OnNSSTaskRunner()); |
| DCHECK(false_started_ || handshake_callback_called_); |
| DCHECK_EQ(STATE_NONE, next_handshake_state_); |
| DCHECK(user_read_callback_.is_null()); |
| DCHECK(user_connect_callback_.is_null()); |
| DCHECK(!user_read_buf_.get()); |
| DCHECK(nss_bufs_); |
| |
| user_read_buf_ = buf; |
| user_read_buf_len_ = buf_len; |
| |
| int rv = DoReadLoop(OK); |
| if (rv == ERR_IO_PENDING) { |
| if (OnNetworkTaskRunner()) |
| nss_waiting_read_ = true; |
| user_read_callback_ = callback; |
| } else { |
| user_read_buf_ = NULL; |
| user_read_buf_len_ = 0; |
| |
| if (!OnNetworkTaskRunner()) { |
| PostOrRunCallback(FROM_HERE, base::Bind(&Core::DidNSSRead, this, rv)); |
| PostOrRunCallback(FROM_HERE, base::Bind(callback, rv)); |
| return ERR_IO_PENDING; |
| } else { |
| DCHECK(!nss_waiting_read_); |
| if (rv <= 0) { |
| nss_is_closed_ = true; |
| } else { |
| was_ever_used_ = true; |
| } |
| } |
| } |
| |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::Core::Write(IOBuffer* buf, int buf_len, |
| const CompletionCallback& callback) { |
| if (!OnNSSTaskRunner()) { |
| DCHECK(OnNetworkTaskRunner()); |
| DCHECK(!detached_); |
| DCHECK(transport_); |
| DCHECK(!nss_waiting_write_); |
| |
| nss_waiting_write_ = true; |
| bool posted = nss_task_runner_->PostTask( |
| FROM_HERE, |
| base::Bind(IgnoreResult(&Core::Write), this, make_scoped_refptr(buf), |
| buf_len, callback)); |
| if (!posted) { |
| nss_is_closed_ = true; |
| nss_waiting_write_ = false; |
| } |
| return posted ? ERR_IO_PENDING : ERR_ABORTED; |
| } |
| |
| DCHECK(OnNSSTaskRunner()); |
| DCHECK(false_started_ || handshake_callback_called_); |
| DCHECK_EQ(STATE_NONE, next_handshake_state_); |
| DCHECK(user_write_callback_.is_null()); |
| DCHECK(user_connect_callback_.is_null()); |
| DCHECK(!user_write_buf_.get()); |
| DCHECK(nss_bufs_); |
| |
| user_write_buf_ = buf; |
| user_write_buf_len_ = buf_len; |
| |
| int rv = DoWriteLoop(OK); |
| if (rv == ERR_IO_PENDING) { |
| if (OnNetworkTaskRunner()) |
| nss_waiting_write_ = true; |
| user_write_callback_ = callback; |
| } else { |
| user_write_buf_ = NULL; |
| user_write_buf_len_ = 0; |
| |
| if (!OnNetworkTaskRunner()) { |
| PostOrRunCallback(FROM_HERE, base::Bind(&Core::DidNSSWrite, this, rv)); |
| PostOrRunCallback(FROM_HERE, base::Bind(callback, rv)); |
| return ERR_IO_PENDING; |
| } else { |
| DCHECK(!nss_waiting_write_); |
| if (rv < 0) { |
| nss_is_closed_ = true; |
| } else if (rv > 0) { |
| was_ever_used_ = true; |
| } |
| } |
| } |
| |
| return rv; |
| } |
| |
| bool SSLClientSocketNSS::Core::IsConnected() const { |
| DCHECK(OnNetworkTaskRunner()); |
| return !nss_is_closed_; |
| } |
| |
| bool SSLClientSocketNSS::Core::HasPendingAsyncOperation() const { |
| DCHECK(OnNetworkTaskRunner()); |
| return nss_waiting_read_ || nss_waiting_write_; |
| } |
| |
| bool SSLClientSocketNSS::Core::HasUnhandledReceivedData() const { |
| DCHECK(OnNetworkTaskRunner()); |
| return unhandled_buffer_size_ != 0; |
| } |
| |
| bool SSLClientSocketNSS::Core::WasEverUsed() const { |
| DCHECK(OnNetworkTaskRunner()); |
| return was_ever_used_; |
| } |
| |
| void SSLClientSocketNSS::Core::CacheSessionIfNecessary() { |
| // TODO(rsleevi): This should occur on the NSS task runner, due to the use of |
| // nss_fd_. However, it happens on the network task runner in order to match |
| // the buggy behavior of ExportKeyingMaterial. |
| // |
| // Once http://crbug.com/330360 is fixed, this should be moved to an |
| // implementation that exclusively does this work on the NSS TaskRunner. This |
| // is "safe" because it is only called during the certificate verification |
| // state machine of the main socket, which is safe because no underlying |
| // transport IO will be occuring in that state, and NSS will not be blocking |
| // on any PKCS#11 related locks that might block the Network TaskRunner. |
| DCHECK(OnNetworkTaskRunner()); |
| |
| // Only cache the session if the connection was not False Started, because |
| // sessions should only be cached *after* the peer's Finished message is |
| // processed. |
| // In the case of False Start, the session will be cached once the |
| // HandshakeCallback is called, which signals the receipt and processing of |
| // the Finished message, and which will happen during a call to |
| // PR_Read/PR_Write. |
| if (!false_started_) |
| SSL_CacheSession(nss_fd_); |
| } |
| |
| bool SSLClientSocketNSS::Core::OnNSSTaskRunner() const { |
| return nss_task_runner_->RunsTasksOnCurrentThread(); |
| } |
| |
| bool SSLClientSocketNSS::Core::OnNetworkTaskRunner() const { |
| return network_task_runner_->RunsTasksOnCurrentThread(); |
| } |
| |
| // static |
| SECStatus SSLClientSocketNSS::Core::OwnAuthCertHandler( |
| void* arg, |
| PRFileDesc* socket, |
| PRBool checksig, |
| PRBool is_server) { |
| Core* core = reinterpret_cast<Core*>(arg); |
| if (core->handshake_callback_called_) { |
| // Disallow the server certificate to change in a renegotiation. |
| CERTCertificate* old_cert = core->nss_handshake_state_.server_cert_chain[0]; |
| ScopedCERTCertificate new_cert(SSL_PeerCertificate(socket)); |
| if (new_cert->derCert.len != old_cert->derCert.len || |
| memcmp(new_cert->derCert.data, old_cert->derCert.data, |
| new_cert->derCert.len) != 0) { |
| // NSS doesn't have an error code that indicates the server certificate |
| // changed. Borrow SSL_ERROR_WRONG_CERTIFICATE (which NSS isn't using) |
| // for this purpose. |
| PORT_SetError(SSL_ERROR_WRONG_CERTIFICATE); |
| return SECFailure; |
| } |
| } |
| |
| // Tell NSS to not verify the certificate. |
| return SECSuccess; |
| } |
| |
| #if defined(OS_IOS) |
| |
| // static |
| SECStatus SSLClientSocketNSS::Core::ClientAuthHandler( |
| void* arg, |
| PRFileDesc* socket, |
| CERTDistNames* ca_names, |
| CERTCertificate** result_certificate, |
| SECKEYPrivateKey** result_private_key) { |
| Core* core = reinterpret_cast<Core*>(arg); |
| DCHECK(core->OnNSSTaskRunner()); |
| |
| core->PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEvent, core->weak_net_log_, |
| NetLog::TYPE_SSL_CLIENT_CERT_REQUESTED)); |
| |
| // TODO(droger): Support client auth on iOS. See http://crbug.com/145954). |
| LOG(WARNING) << "Client auth is not supported"; |
| |
| // Never send a certificate. |
| core->AddCertProvidedEvent(0); |
| return SECFailure; |
| } |
| |
| #else // !OS_IOS |
| |
| // static |
| // Based on Mozilla's NSS_GetClientAuthData. |
| SECStatus SSLClientSocketNSS::Core::ClientAuthHandler( |
| void* arg, |
| PRFileDesc* socket, |
| CERTDistNames* ca_names, |
| CERTCertificate** result_certificate, |
| SECKEYPrivateKey** result_private_key) { |
| Core* core = reinterpret_cast<Core*>(arg); |
| DCHECK(core->OnNSSTaskRunner()); |
| |
| core->PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEvent, core->weak_net_log_, |
| NetLog::TYPE_SSL_CLIENT_CERT_REQUESTED)); |
| |
| // Regular client certificate requested. |
| core->client_auth_cert_needed_ = !core->ssl_config_.send_client_cert; |
| void* wincx = SSL_RevealPinArg(socket); |
| |
| if (core->ssl_config_.send_client_cert) { |
| // Second pass: a client certificate should have been selected. |
| if (core->ssl_config_.client_cert.get()) { |
| CERTCertificate* cert = |
| CERT_DupCertificate(core->ssl_config_.client_cert->os_cert_handle()); |
| SECKEYPrivateKey* privkey = PK11_FindKeyByAnyCert(cert, wincx); |
| if (privkey) { |
| // TODO(jsorianopastor): We should wait for server certificate |
| // verification before sending our credentials. See |
| // http://crbug.com/13934. |
| *result_certificate = cert; |
| *result_private_key = privkey; |
| // A cert_count of -1 means the number of certificates is unknown. |
| // NSS will construct the certificate chain. |
| core->AddCertProvidedEvent(-1); |
| |
| return SECSuccess; |
| } |
| LOG(WARNING) << "Client cert found without private key"; |
| } |
| // Send no client certificate. |
| core->AddCertProvidedEvent(0); |
| return SECFailure; |
| } |
| |
| // First pass: client certificate is needed. |
| core->nss_handshake_state_.cert_authorities.clear(); |
| |
| // Retrieve the DER-encoded DistinguishedName of the cert issuers accepted by |
| // the server and save them in |cert_authorities|. |
| for (int i = 0; i < ca_names->nnames; i++) { |
| core->nss_handshake_state_.cert_authorities.push_back(std::string( |
| reinterpret_cast<const char*>(ca_names->names[i].data), |
| static_cast<size_t>(ca_names->names[i].len))); |
| } |
| |
| // Update the network task runner's view of the handshake state now that |
| // server certificate request has been recorded. |
| core->PostOrRunCallback( |
| FROM_HERE, base::Bind(&Core::OnHandshakeStateUpdated, core, |
| core->nss_handshake_state_)); |
| |
| // Tell NSS to suspend the client authentication. We will then abort the |
| // handshake by returning ERR_SSL_CLIENT_AUTH_CERT_NEEDED. |
| return SECWouldBlock; |
| } |
| #endif // OS_IOS |
| |
| // static |
| SECStatus SSLClientSocketNSS::Core::CanFalseStartCallback( |
| PRFileDesc* socket, |
| void* arg, |
| PRBool* can_false_start) { |
| // If the server doesn't support NPN or ALPN, then we don't do False |
| // Start with it. |
| PRBool negotiated_extension; |
| SECStatus rv = SSL_HandshakeNegotiatedExtension(socket, |
| ssl_app_layer_protocol_xtn, |
| &negotiated_extension); |
| if (rv != SECSuccess || !negotiated_extension) { |
| rv = SSL_HandshakeNegotiatedExtension(socket, |
| ssl_next_proto_nego_xtn, |
| &negotiated_extension); |
| } |
| if (rv != SECSuccess || !negotiated_extension) { |
| *can_false_start = PR_FALSE; |
| return SECSuccess; |
| } |
| |
| SSLChannelInfo channel_info; |
| SECStatus ok = |
| SSL_GetChannelInfo(socket, &channel_info, sizeof(channel_info)); |
| if (ok != SECSuccess || channel_info.length != sizeof(channel_info) || |
| channel_info.protocolVersion < SSL_LIBRARY_VERSION_TLS_1_2 || |
| !IsSecureTLSCipherSuite(channel_info.cipherSuite)) { |
| *can_false_start = PR_FALSE; |
| return SECSuccess; |
| } |
| |
| return SSL_RecommendedCanFalseStart(socket, can_false_start); |
| } |
| |
| // static |
| void SSLClientSocketNSS::Core::HandshakeCallback( |
| PRFileDesc* socket, |
| void* arg) { |
| Core* core = reinterpret_cast<Core*>(arg); |
| DCHECK(core->OnNSSTaskRunner()); |
| |
| bool is_initial = !core->handshake_callback_called_; |
| core->handshake_callback_called_ = true; |
| if (core->false_started_) { |
| core->false_started_ = false; |
| // If the connection was False Started, then at the time of this callback, |
| // the peer's certificate will have been verified or the caller will have |
| // accepted the error. |
| // This is guaranteed when using False Start because this callback will |
| // not be invoked until processing the peer's Finished message, which |
| // will only happen in a PR_Read/PR_Write call, which can only happen |
| // after the peer's certificate is verified. |
| SSL_CacheSessionUnlocked(socket); |
| |
| // Additionally, when False Starting, DoHandshake() will have already |
| // called HandshakeSucceeded(), so return now. |
| return; |
| } |
| core->HandshakeSucceeded(is_initial); |
| } |
| |
| void SSLClientSocketNSS::Core::HandshakeSucceeded(bool is_initial) { |
| DCHECK(OnNSSTaskRunner()); |
| |
| PRBool last_handshake_resumed; |
| SECStatus rv = SSL_HandshakeResumedSession(nss_fd_, &last_handshake_resumed); |
| if (rv == SECSuccess && last_handshake_resumed) { |
| nss_handshake_state_.resumed_handshake = true; |
| } else { |
| nss_handshake_state_.resumed_handshake = false; |
| } |
| |
| RecordChannelIDSupportOnNSSTaskRunner(); |
| UpdateServerCert(); |
| UpdateSignedCertTimestamps(); |
| UpdateStapledOCSPResponse(); |
| UpdateConnectionStatus(); |
| UpdateNextProto(); |
| UpdateExtensionUsed(); |
| |
| if (is_initial && IsRenegotiationAllowed()) { |
| // For compatibility, do not enforce RFC 5746 support. Per section 4.1, |
| // enforcement falls largely on the server. |
| // |
| // This is done in a callback rather than after SSL_ForceHandshake returns |
| // because SSL_ForceHandshake will otherwise greedly consume renegotiations |
| // before returning if Finished and HelloRequest are in the same |
| // record. |
| // |
| // Note that SSL_OptionSet should only be called for an initial |
| // handshake. See https://crbug.com/125299. |
| SECStatus rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_RENEGOTIATION, |
| SSL_RENEGOTIATE_TRANSITIONAL); |
| DCHECK_EQ(SECSuccess, rv); |
| } |
| |
| // Update the network task runners view of the handshake state whenever |
| // a handshake has completed. |
| PostOrRunCallback( |
| FROM_HERE, base::Bind(&Core::OnHandshakeStateUpdated, this, |
| nss_handshake_state_)); |
| } |
| |
| int SSLClientSocketNSS::Core::HandleNSSError(PRErrorCode nss_error) { |
| DCHECK(OnNSSTaskRunner()); |
| |
| return MapNSSClientError(nss_error); |
| } |
| |
| int SSLClientSocketNSS::Core::DoHandshakeLoop(int last_io_result) { |
| DCHECK(OnNSSTaskRunner()); |
| |
| int rv = last_io_result; |
| do { |
| // Default to STATE_NONE for next state. |
| State state = next_handshake_state_; |
| GotoState(STATE_NONE); |
| |
| switch (state) { |
| case STATE_HANDSHAKE: |
| rv = DoHandshake(); |
| break; |
| case STATE_GET_DOMAIN_BOUND_CERT_COMPLETE: |
| rv = DoGetDBCertComplete(rv); |
| break; |
| case STATE_NONE: |
| default: |
| rv = ERR_UNEXPECTED; |
| LOG(DFATAL) << "unexpected state " << state; |
| break; |
| } |
| |
| // Do the actual network I/O |
| bool network_moved = DoTransportIO(); |
| if (network_moved && next_handshake_state_ == STATE_HANDSHAKE) { |
| // In general we exit the loop if rv is ERR_IO_PENDING. In this |
| // special case we keep looping even if rv is ERR_IO_PENDING because |
| // the transport IO may allow DoHandshake to make progress. |
| DCHECK(rv == OK || rv == ERR_IO_PENDING); |
| rv = OK; // This causes us to stay in the loop. |
| } |
| } while (rv != ERR_IO_PENDING && next_handshake_state_ != STATE_NONE); |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::Core::DoReadLoop(int result) { |
| DCHECK(OnNSSTaskRunner()); |
| DCHECK(false_started_ || handshake_callback_called_); |
| DCHECK_EQ(STATE_NONE, next_handshake_state_); |
| |
| if (result < 0) |
| return result; |
| |
| if (!nss_bufs_) { |
| LOG(DFATAL) << "!nss_bufs_"; |
| int rv = ERR_UNEXPECTED; |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEventWithCallback, weak_net_log_, |
| NetLog::TYPE_SSL_READ_ERROR, |
| CreateNetLogSSLErrorCallback(rv, 0))); |
| return rv; |
| } |
| |
| bool network_moved; |
| int rv; |
| do { |
| rv = DoPayloadRead(); |
| network_moved = DoTransportIO(); |
| } while (rv == ERR_IO_PENDING && network_moved); |
| |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::Core::DoWriteLoop(int result) { |
| DCHECK(OnNSSTaskRunner()); |
| DCHECK(false_started_ || handshake_callback_called_); |
| DCHECK_EQ(STATE_NONE, next_handshake_state_); |
| |
| if (result < 0) |
| return result; |
| |
| if (!nss_bufs_) { |
| LOG(DFATAL) << "!nss_bufs_"; |
| int rv = ERR_UNEXPECTED; |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEventWithCallback, weak_net_log_, |
| NetLog::TYPE_SSL_READ_ERROR, |
| CreateNetLogSSLErrorCallback(rv, 0))); |
| return rv; |
| } |
| |
| bool network_moved; |
| int rv; |
| do { |
| rv = DoPayloadWrite(); |
| network_moved = DoTransportIO(); |
| } while (rv == ERR_IO_PENDING && network_moved); |
| |
| LeaveFunction(rv); |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::Core::DoHandshake() { |
| DCHECK(OnNSSTaskRunner()); |
| |
| int net_error = OK; |
| SECStatus rv = SSL_ForceHandshake(nss_fd_); |
| |
| // Note: this function may be called multiple times during the handshake, so |
| // even though channel id and client auth are separate else cases, they can |
| // both be used during a single SSL handshake. |
| if (channel_id_needed_) { |
| GotoState(STATE_GET_DOMAIN_BOUND_CERT_COMPLETE); |
| net_error = ERR_IO_PENDING; |
| } else if (client_auth_cert_needed_) { |
| net_error = ERR_SSL_CLIENT_AUTH_CERT_NEEDED; |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEventWithCallback, weak_net_log_, |
| NetLog::TYPE_SSL_HANDSHAKE_ERROR, |
| CreateNetLogSSLErrorCallback(net_error, 0))); |
| } else if (rv == SECSuccess) { |
| if (!handshake_callback_called_) { |
| false_started_ = true; |
| HandshakeSucceeded(true); |
| } |
| } else { |
| PRErrorCode prerr = PR_GetError(); |
| net_error = HandleNSSError(prerr); |
| |
| // If not done, stay in this state |
| if (net_error == ERR_IO_PENDING) { |
| GotoState(STATE_HANDSHAKE); |
| } else { |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEventWithCallback, weak_net_log_, |
| NetLog::TYPE_SSL_HANDSHAKE_ERROR, |
| CreateNetLogSSLErrorCallback(net_error, prerr))); |
| } |
| } |
| |
| return net_error; |
| } |
| |
| int SSLClientSocketNSS::Core::DoGetDBCertComplete(int result) { |
| SECStatus rv; |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&BoundNetLog::EndEventWithNetErrorCode, weak_net_log_, |
| NetLog::TYPE_SSL_GET_DOMAIN_BOUND_CERT, result)); |
| |
| channel_id_needed_ = false; |
| |
| if (result != OK) |
| return result; |
| |
| SECKEYPublicKey* public_key; |
| SECKEYPrivateKey* private_key; |
| int error = ImportChannelIDKeys(&public_key, &private_key); |
| if (error != OK) |
| return error; |
| |
| rv = SSL_RestartHandshakeAfterChannelIDReq(nss_fd_, public_key, private_key); |
| if (rv != SECSuccess) |
| return MapNSSError(PORT_GetError()); |
| |
| SetChannelIDProvided(); |
| GotoState(STATE_HANDSHAKE); |
| return OK; |
| } |
| |
| int SSLClientSocketNSS::Core::DoPayloadRead() { |
| DCHECK(OnNSSTaskRunner()); |
| DCHECK(user_read_buf_.get()); |
| DCHECK_GT(user_read_buf_len_, 0); |
| |
| int rv; |
| // If a previous greedy read resulted in an error that was not consumed (eg: |
| // due to the caller having read some data successfully), then return that |
| // pending error now. |
| if (pending_read_result_ != kNoPendingReadResult) { |
| rv = pending_read_result_; |
| PRErrorCode prerr = pending_read_nss_error_; |
| pending_read_result_ = kNoPendingReadResult; |
| pending_read_nss_error_ = 0; |
| |
| if (rv == 0) { |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&LogByteTransferEvent, weak_net_log_, |
| NetLog::TYPE_SSL_SOCKET_BYTES_RECEIVED, rv, |
| scoped_refptr<IOBuffer>(user_read_buf_))); |
| } else { |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEventWithCallback, weak_net_log_, |
| NetLog::TYPE_SSL_READ_ERROR, |
| CreateNetLogSSLErrorCallback(rv, prerr))); |
| } |
| return rv; |
| } |
| |
| // Perform a greedy read, attempting to read as much as the caller has |
| // requested. In the current NSS implementation, PR_Read will return |
| // exactly one SSL application data record's worth of data per invocation. |
| // The record size is dictated by the server, and may be noticeably smaller |
| // than the caller's buffer. This may be as little as a single byte, if the |
| // server is performing 1/n-1 record splitting. |
| // |
| // However, this greedy read may result in renegotiations/re-handshakes |
| // happening or may lead to some data being read, followed by an EOF (such as |
| // a TLS close-notify). If at least some data was read, then that result |
| // should be deferred until the next call to DoPayloadRead(). Otherwise, if no |
| // data was read, it's safe to return the error or EOF immediately. |
| int total_bytes_read = 0; |
| do { |
| rv = PR_Read(nss_fd_, user_read_buf_->data() + total_bytes_read, |
| user_read_buf_len_ - total_bytes_read); |
| if (rv > 0) |
| total_bytes_read += rv; |
| } while (total_bytes_read < user_read_buf_len_ && rv > 0); |
| int amount_in_read_buffer = memio_GetReadableBufferSize(nss_bufs_); |
| PostOrRunCallback(FROM_HERE, base::Bind(&Core::OnNSSBufferUpdated, this, |
| amount_in_read_buffer)); |
| |
| if (total_bytes_read == user_read_buf_len_) { |
| // The caller's entire request was satisfied without error. No further |
| // processing needed. |
| rv = total_bytes_read; |
| } else { |
| // Otherwise, an error occurred (rv <= 0). The error needs to be handled |
| // immediately, while the NSPR/NSS errors are still available in |
| // thread-local storage. However, the handled/remapped error code should |
| // only be returned if no application data was already read; if it was, the |
| // error code should be deferred until the next call of DoPayloadRead. |
| // |
| // If no data was read, |*next_result| will point to the return value of |
| // this function. If at least some data was read, |*next_result| will point |
| // to |pending_read_error_|, to be returned in a future call to |
| // DoPayloadRead() (e.g.: after the current data is handled). |
| int* next_result = &rv; |
| if (total_bytes_read > 0) { |
| pending_read_result_ = rv; |
| rv = total_bytes_read; |
| next_result = &pending_read_result_; |
| } |
| |
| if (client_auth_cert_needed_) { |
| *next_result = ERR_SSL_CLIENT_AUTH_CERT_NEEDED; |
| pending_read_nss_error_ = 0; |
| } else if (*next_result < 0) { |
| // If *next_result == 0, then that indicates EOF, and no special error |
| // handling is needed. |
| pending_read_nss_error_ = PR_GetError(); |
| *next_result = HandleNSSError(pending_read_nss_error_); |
| if (rv > 0 && *next_result == ERR_IO_PENDING) { |
| // If at least some data was read from PR_Read(), do not treat |
| // insufficient data as an error to return in the next call to |
| // DoPayloadRead() - instead, let the call fall through to check |
| // PR_Read() again. This is because DoTransportIO() may complete |
| // in between the next call to DoPayloadRead(), and thus it is |
| // important to check PR_Read() on subsequent invocations to see |
| // if a complete record may now be read. |
| pending_read_nss_error_ = 0; |
| pending_read_result_ = kNoPendingReadResult; |
| } |
| } |
| } |
| |
| DCHECK_NE(ERR_IO_PENDING, pending_read_result_); |
| |
| if (rv >= 0) { |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&LogByteTransferEvent, weak_net_log_, |
| NetLog::TYPE_SSL_SOCKET_BYTES_RECEIVED, rv, |
| scoped_refptr<IOBuffer>(user_read_buf_))); |
| } else if (rv != ERR_IO_PENDING) { |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEventWithCallback, weak_net_log_, |
| NetLog::TYPE_SSL_READ_ERROR, |
| CreateNetLogSSLErrorCallback(rv, pending_read_nss_error_))); |
| pending_read_nss_error_ = 0; |
| } |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::Core::DoPayloadWrite() { |
| DCHECK(OnNSSTaskRunner()); |
| |
| DCHECK(user_write_buf_.get()); |
| |
| int old_amount_in_read_buffer = memio_GetReadableBufferSize(nss_bufs_); |
| int rv = PR_Write(nss_fd_, user_write_buf_->data(), user_write_buf_len_); |
| int new_amount_in_read_buffer = memio_GetReadableBufferSize(nss_bufs_); |
| // PR_Write could potentially consume the unhandled data in the memio read |
| // buffer if a renegotiation is in progress. If the buffer is consumed, |
| // notify the latest buffer size to NetworkRunner. |
| if (old_amount_in_read_buffer != new_amount_in_read_buffer) { |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&Core::OnNSSBufferUpdated, this, new_amount_in_read_buffer)); |
| } |
| if (rv >= 0) { |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&LogByteTransferEvent, weak_net_log_, |
| NetLog::TYPE_SSL_SOCKET_BYTES_SENT, rv, |
| scoped_refptr<IOBuffer>(user_write_buf_))); |
| return rv; |
| } |
| PRErrorCode prerr = PR_GetError(); |
| if (prerr == PR_WOULD_BLOCK_ERROR) |
| return ERR_IO_PENDING; |
| |
| rv = HandleNSSError(prerr); |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEventWithCallback, weak_net_log_, |
| NetLog::TYPE_SSL_WRITE_ERROR, |
| CreateNetLogSSLErrorCallback(rv, prerr))); |
| return rv; |
| } |
| |
| // Do as much network I/O as possible between the buffer and the |
| // transport socket. Return true if some I/O performed, false |
| // otherwise (error or ERR_IO_PENDING). |
| bool SSLClientSocketNSS::Core::DoTransportIO() { |
| DCHECK(OnNSSTaskRunner()); |
| |
| bool network_moved = false; |
| if (nss_bufs_ != NULL) { |
| int rv; |
| // Read and write as much data as we can. The loop is neccessary |
| // because Write() may return synchronously. |
| do { |
| rv = BufferSend(); |
| if (rv != ERR_IO_PENDING && rv != 0) |
| network_moved = true; |
| } while (rv > 0); |
| if (!transport_recv_eof_ && BufferRecv() != ERR_IO_PENDING) |
| network_moved = true; |
| } |
| return network_moved; |
| } |
| |
| int SSLClientSocketNSS::Core::BufferRecv() { |
| DCHECK(OnNSSTaskRunner()); |
| |
| if (transport_recv_busy_) |
| return ERR_IO_PENDING; |
| |
| // If NSS is blocked on reading from |nss_bufs_|, because it is empty, |
| // determine how much data NSS wants to read. If NSS was not blocked, |
| // this will return 0. |
| int requested = memio_GetReadRequest(nss_bufs_); |
| if (requested == 0) { |
| // This is not a perfect match of error codes, as no operation is |
| // actually pending. However, returning 0 would be interpreted as a |
| // possible sign of EOF, which is also an inappropriate match. |
| return ERR_IO_PENDING; |
| } |
| |
| char* buf; |
| int nb = memio_GetReadParams(nss_bufs_, &buf); |
| int rv; |
| if (!nb) { |
| // buffer too full to read into, so no I/O possible at moment |
| rv = ERR_IO_PENDING; |
| } else { |
| scoped_refptr<IOBuffer> read_buffer(new IOBuffer(nb)); |
| if (OnNetworkTaskRunner()) { |
| rv = DoBufferRecv(read_buffer.get(), nb); |
| } else { |
| bool posted = network_task_runner_->PostTask( |
| FROM_HERE, |
| base::Bind(IgnoreResult(&Core::DoBufferRecv), this, read_buffer, |
| nb)); |
| rv = posted ? ERR_IO_PENDING : ERR_ABORTED; |
| } |
| |
| if (rv == ERR_IO_PENDING) { |
| transport_recv_busy_ = true; |
| } else { |
| if (rv > 0) { |
| memcpy(buf, read_buffer->data(), rv); |
| } else if (rv == 0) { |
| transport_recv_eof_ = true; |
| } |
| memio_PutReadResult(nss_bufs_, MapErrorToNSS(rv)); |
| } |
| } |
| return rv; |
| } |
| |
| // Return 0 if nss_bufs_ was empty, |
| // > 0 for bytes transferred immediately, |
| // < 0 for error (or the non-error ERR_IO_PENDING). |
| int SSLClientSocketNSS::Core::BufferSend() { |
| DCHECK(OnNSSTaskRunner()); |
| |
| if (transport_send_busy_) |
| return ERR_IO_PENDING; |
| |
| const char* buf1; |
| const char* buf2; |
| unsigned int len1, len2; |
| if (memio_GetWriteParams(nss_bufs_, &buf1, &len1, &buf2, &len2)) { |
| // It is important this return synchronously to prevent spinning infinitely |
| // in the off-thread NSS case. The error code itself is ignored, so just |
| // return ERR_ABORTED. See https://crbug.com/381160. |
| return ERR_ABORTED; |
| } |
| const size_t len = len1 + len2; |
| |
| int rv = 0; |
| if (len) { |
| scoped_refptr<IOBuffer> send_buffer(new IOBuffer(len)); |
| memcpy(send_buffer->data(), buf1, len1); |
| memcpy(send_buffer->data() + len1, buf2, len2); |
| |
| if (OnNetworkTaskRunner()) { |
| rv = DoBufferSend(send_buffer.get(), len); |
| } else { |
| bool posted = network_task_runner_->PostTask( |
| FROM_HERE, |
| base::Bind(IgnoreResult(&Core::DoBufferSend), this, send_buffer, |
| len)); |
| rv = posted ? ERR_IO_PENDING : ERR_ABORTED; |
| } |
| |
| if (rv == ERR_IO_PENDING) { |
| transport_send_busy_ = true; |
| } else { |
| memio_PutWriteResult(nss_bufs_, MapErrorToNSS(rv)); |
| } |
| } |
| |
| return rv; |
| } |
| |
| void SSLClientSocketNSS::Core::OnRecvComplete(int result) { |
| DCHECK(OnNSSTaskRunner()); |
| |
| if (next_handshake_state_ == STATE_HANDSHAKE) { |
| OnHandshakeIOComplete(result); |
| return; |
| } |
| |
| // Network layer received some data, check if client requested to read |
| // decrypted data. |
| if (!user_read_buf_.get()) |
| return; |
| |
| int rv = DoReadLoop(result); |
| if (rv != ERR_IO_PENDING) |
| DoReadCallback(rv); |
| } |
| |
| void SSLClientSocketNSS::Core::OnSendComplete(int result) { |
| DCHECK(OnNSSTaskRunner()); |
| |
| if (next_handshake_state_ == STATE_HANDSHAKE) { |
| OnHandshakeIOComplete(result); |
| return; |
| } |
| |
| // OnSendComplete may need to call DoPayloadRead while the renegotiation |
| // handshake is in progress. |
| int rv_read = ERR_IO_PENDING; |
| int rv_write = ERR_IO_PENDING; |
| bool network_moved; |
| do { |
| if (user_read_buf_.get()) |
| rv_read = DoPayloadRead(); |
| if (user_write_buf_.get()) |
| rv_write = DoPayloadWrite(); |
| network_moved = DoTransportIO(); |
| } while (rv_read == ERR_IO_PENDING && rv_write == ERR_IO_PENDING && |
| (user_read_buf_.get() || user_write_buf_.get()) && network_moved); |
| |
| // If the parent SSLClientSocketNSS is deleted during the processing of the |
| // Read callback and OnNSSTaskRunner() == OnNetworkTaskRunner(), then the Core |
| // will be detached (and possibly deleted). Guard against deletion by taking |
| // an extra reference, then check if the Core was detached before invoking the |
| // next callback. |
| scoped_refptr<Core> guard(this); |
| if (user_read_buf_.get() && rv_read != ERR_IO_PENDING) |
| DoReadCallback(rv_read); |
| |
| if (OnNetworkTaskRunner() && detached_) |
| return; |
| |
| if (user_write_buf_.get() && rv_write != ERR_IO_PENDING) |
| DoWriteCallback(rv_write); |
| } |
| |
| // As part of Connect(), the SSLClientSocketNSS object performs an SSL |
| // handshake. This requires network IO, which in turn calls |
| // BufferRecvComplete() with a non-zero byte count. This byte count eventually |
| // winds its way through the state machine and ends up being passed to the |
| // callback. For Read() and Write(), that's what we want. But for Connect(), |
| // the caller expects OK (i.e. 0) for success. |
| void SSLClientSocketNSS::Core::DoConnectCallback(int rv) { |
| DCHECK(OnNSSTaskRunner()); |
| DCHECK_NE(rv, ERR_IO_PENDING); |
| DCHECK(!user_connect_callback_.is_null()); |
| |
| base::Closure c = base::Bind( |
| base::ResetAndReturn(&user_connect_callback_), |
| rv > OK ? OK : rv); |
| PostOrRunCallback(FROM_HERE, c); |
| } |
| |
| void SSLClientSocketNSS::Core::DoReadCallback(int rv) { |
| DCHECK(OnNSSTaskRunner()); |
| DCHECK_NE(ERR_IO_PENDING, rv); |
| DCHECK(!user_read_callback_.is_null()); |
| |
| user_read_buf_ = NULL; |
| user_read_buf_len_ = 0; |
| int amount_in_read_buffer = memio_GetReadableBufferSize(nss_bufs_); |
| // This is used to curry the |amount_int_read_buffer| and |user_cb| back to |
| // the network task runner. |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&Core::OnNSSBufferUpdated, this, amount_in_read_buffer)); |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&Core::DidNSSRead, this, rv)); |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(base::ResetAndReturn(&user_read_callback_), rv)); |
| } |
| |
| void SSLClientSocketNSS::Core::DoWriteCallback(int rv) { |
| DCHECK(OnNSSTaskRunner()); |
| DCHECK_NE(ERR_IO_PENDING, rv); |
| DCHECK(!user_write_callback_.is_null()); |
| |
| // Since Run may result in Write being called, clear |user_write_callback_| |
| // up front. |
| user_write_buf_ = NULL; |
| user_write_buf_len_ = 0; |
| // Update buffer status because DoWriteLoop called DoTransportIO which may |
| // perform read operations. |
| int amount_in_read_buffer = memio_GetReadableBufferSize(nss_bufs_); |
| // This is used to curry the |amount_int_read_buffer| and |user_cb| back to |
| // the network task runner. |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&Core::OnNSSBufferUpdated, this, amount_in_read_buffer)); |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&Core::DidNSSWrite, this, rv)); |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(base::ResetAndReturn(&user_write_callback_), rv)); |
| } |
| |
| SECStatus SSLClientSocketNSS::Core::ClientChannelIDHandler( |
| void* arg, |
| PRFileDesc* socket, |
| SECKEYPublicKey **out_public_key, |
| SECKEYPrivateKey **out_private_key) { |
| Core* core = reinterpret_cast<Core*>(arg); |
| DCHECK(core->OnNSSTaskRunner()); |
| |
| core->PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEvent, core->weak_net_log_, |
| NetLog::TYPE_SSL_CHANNEL_ID_REQUESTED)); |
| |
| // We have negotiated the TLS channel ID extension. |
| core->channel_id_xtn_negotiated_ = true; |
| std::string host = core->host_and_port_.host(); |
| int error = ERR_UNEXPECTED; |
| if (core->OnNetworkTaskRunner()) { |
| error = core->DoGetChannelID(host); |
| } else { |
| bool posted = core->network_task_runner_->PostTask( |
| FROM_HERE, |
| base::Bind( |
| IgnoreResult(&Core::DoGetChannelID), |
| core, host)); |
| error = posted ? ERR_IO_PENDING : ERR_ABORTED; |
| } |
| |
| if (error == ERR_IO_PENDING) { |
| // Asynchronous case. |
| core->channel_id_needed_ = true; |
| return SECWouldBlock; |
| } |
| |
| core->PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&BoundNetLog::EndEventWithNetErrorCode, core->weak_net_log_, |
| NetLog::TYPE_SSL_GET_DOMAIN_BOUND_CERT, error)); |
| SECStatus rv = SECSuccess; |
| if (error == OK) { |
| // Synchronous success. |
| int result = core->ImportChannelIDKeys(out_public_key, out_private_key); |
| if (result == OK) |
| core->SetChannelIDProvided(); |
| else |
| rv = SECFailure; |
| } else { |
| rv = SECFailure; |
| } |
| |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::Core::ImportChannelIDKeys(SECKEYPublicKey** public_key, |
| SECKEYPrivateKey** key) { |
| if (!channel_id_key_) |
| return SECFailure; |
| |
| *public_key = SECKEY_CopyPublicKey(channel_id_key_->public_key()); |
| *key = SECKEY_CopyPrivateKey(channel_id_key_->key()); |
| |
| return OK; |
| } |
| |
| void SSLClientSocketNSS::Core::UpdateServerCert() { |
| nss_handshake_state_.server_cert_chain.Reset(nss_fd_); |
| nss_handshake_state_.server_cert = X509Certificate::CreateFromDERCertChain( |
| nss_handshake_state_.server_cert_chain.AsStringPieceVector()); |
| if (nss_handshake_state_.server_cert.get()) { |
| // Since this will be called asynchronously on another thread, it needs to |
| // own a reference to the certificate. |
| NetLog::ParametersCallback net_log_callback = |
| base::Bind(&NetLogX509CertificateCallback, |
| nss_handshake_state_.server_cert); |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&AddLogEventWithCallback, weak_net_log_, |
| NetLog::TYPE_SSL_CERTIFICATES_RECEIVED, |
| net_log_callback)); |
| } |
| } |
| |
| void SSLClientSocketNSS::Core::UpdateSignedCertTimestamps() { |
| const SECItem* signed_cert_timestamps = |
| SSL_PeerSignedCertTimestamps(nss_fd_); |
| |
| if (!signed_cert_timestamps || !signed_cert_timestamps->len) |
| return; |
| |
| nss_handshake_state_.sct_list_from_tls_extension = std::string( |
| reinterpret_cast<char*>(signed_cert_timestamps->data), |
| signed_cert_timestamps->len); |
| } |
| |
| void SSLClientSocketNSS::Core::UpdateStapledOCSPResponse() { |
| PRBool ocsp_requested = PR_FALSE; |
| SSL_OptionGet(nss_fd_, SSL_ENABLE_OCSP_STAPLING, &ocsp_requested); |
| const SECItemArray* ocsp_responses = |
| SSL_PeerStapledOCSPResponses(nss_fd_); |
| bool ocsp_responses_present = ocsp_responses && ocsp_responses->len; |
| if (ocsp_requested) |
| UMA_HISTOGRAM_BOOLEAN("Net.OCSPResponseStapled", ocsp_responses_present); |
| if (!ocsp_responses_present) |
| return; |
| |
| nss_handshake_state_.stapled_ocsp_response = std::string( |
| reinterpret_cast<char*>(ocsp_responses->items[0].data), |
| ocsp_responses->items[0].len); |
| } |
| |
| void SSLClientSocketNSS::Core::UpdateConnectionStatus() { |
| // Note: This function may be called multiple times for a single connection |
| // if renegotiations occur. |
| nss_handshake_state_.ssl_connection_status = 0; |
| |
| SSLChannelInfo channel_info; |
| SECStatus ok = SSL_GetChannelInfo(nss_fd_, |
| &channel_info, sizeof(channel_info)); |
| if (ok == SECSuccess && |
| channel_info.length == sizeof(channel_info) && |
| channel_info.cipherSuite) { |
| nss_handshake_state_.ssl_connection_status |= channel_info.cipherSuite; |
| |
| nss_handshake_state_.ssl_connection_status |= |
| (static_cast<int>(channel_info.compressionMethod) & |
| SSL_CONNECTION_COMPRESSION_MASK) << |
| SSL_CONNECTION_COMPRESSION_SHIFT; |
| |
| int version = SSL_CONNECTION_VERSION_UNKNOWN; |
| if (channel_info.protocolVersion == SSL_LIBRARY_VERSION_TLS_1_0) { |
| version = SSL_CONNECTION_VERSION_TLS1; |
| } else if (channel_info.protocolVersion == SSL_LIBRARY_VERSION_TLS_1_1) { |
| version = SSL_CONNECTION_VERSION_TLS1_1; |
| } else if (channel_info.protocolVersion == SSL_LIBRARY_VERSION_TLS_1_2) { |
| version = SSL_CONNECTION_VERSION_TLS1_2; |
| } |
| DCHECK_NE(SSL_CONNECTION_VERSION_UNKNOWN, version); |
| nss_handshake_state_.ssl_connection_status |= |
| (version & SSL_CONNECTION_VERSION_MASK) << |
| SSL_CONNECTION_VERSION_SHIFT; |
| } |
| |
| PRBool peer_supports_renego_ext; |
| ok = SSL_HandshakeNegotiatedExtension(nss_fd_, ssl_renegotiation_info_xtn, |
| &peer_supports_renego_ext); |
| if (ok == SECSuccess) { |
| if (!peer_supports_renego_ext) { |
| nss_handshake_state_.ssl_connection_status |= |
| SSL_CONNECTION_NO_RENEGOTIATION_EXTENSION; |
| // Log an informational message if the server does not support secure |
| // renegotiation (RFC 5746). |
| VLOG(1) << "The server " << host_and_port_.ToString() |
| << " does not support the TLS renegotiation_info extension."; |
| } |
| } |
| |
| if (ssl_config_.version_fallback) { |
| nss_handshake_state_.ssl_connection_status |= |
| SSL_CONNECTION_VERSION_FALLBACK; |
| } |
| } |
| |
| void SSLClientSocketNSS::Core::UpdateNextProto() { |
| uint8_t buf[256]; |
| SSLNextProtoState state; |
| unsigned buf_len; |
| |
| SECStatus rv = SSL_GetNextProto(nss_fd_, &state, buf, &buf_len, sizeof(buf)); |
| if (rv != SECSuccess) |
| return; |
| |
| nss_handshake_state_.next_proto = |
| std::string(reinterpret_cast<char*>(buf), buf_len); |
| switch (state) { |
| case SSL_NEXT_PROTO_NEGOTIATED: |
| case SSL_NEXT_PROTO_SELECTED: |
| nss_handshake_state_.next_proto_status = kNextProtoNegotiated; |
| break; |
| case SSL_NEXT_PROTO_NO_OVERLAP: |
| nss_handshake_state_.next_proto_status = kNextProtoNoOverlap; |
| break; |
| case SSL_NEXT_PROTO_NO_SUPPORT: |
| nss_handshake_state_.next_proto_status = kNextProtoUnsupported; |
| break; |
| default: |
| NOTREACHED(); |
| break; |
| } |
| } |
| |
| void SSLClientSocketNSS::Core::UpdateExtensionUsed() { |
| PRBool negotiated_extension; |
| SECStatus rv = SSL_HandshakeNegotiatedExtension(nss_fd_, |
| ssl_app_layer_protocol_xtn, |
| &negotiated_extension); |
| if (rv == SECSuccess && negotiated_extension) { |
| nss_handshake_state_.negotiation_extension_ = kExtensionALPN; |
| } else { |
| rv = SSL_HandshakeNegotiatedExtension(nss_fd_, |
| ssl_next_proto_nego_xtn, |
| &negotiated_extension); |
| if (rv == SECSuccess && negotiated_extension) { |
| nss_handshake_state_.negotiation_extension_ = kExtensionNPN; |
| } |
| } |
| } |
| |
| bool SSLClientSocketNSS::Core::IsRenegotiationAllowed() const { |
| DCHECK(OnNSSTaskRunner()); |
| |
| if (nss_handshake_state_.next_proto_status == kNextProtoUnsupported) |
| return ssl_config_.renego_allowed_default; |
| |
| NextProto next_proto = NextProtoFromString(nss_handshake_state_.next_proto); |
| for (NextProto allowed : ssl_config_.renego_allowed_for_protos) { |
| if (next_proto == allowed) |
| return true; |
| } |
| return false; |
| } |
| |
| void SSLClientSocketNSS::Core::RecordChannelIDSupportOnNSSTaskRunner() { |
| DCHECK(OnNSSTaskRunner()); |
| if (nss_handshake_state_.resumed_handshake) |
| return; |
| |
| // Copy the NSS task runner-only state to the network task runner and |
| // log histograms from there, since the histograms also need access to the |
| // network task runner state. |
| PostOrRunCallback( |
| FROM_HERE, |
| base::Bind(&Core::RecordChannelIDSupportOnNetworkTaskRunner, this, |
| channel_id_xtn_negotiated_, ssl_config_.channel_id_enabled)); |
| } |
| |
| void SSLClientSocketNSS::Core::RecordChannelIDSupportOnNetworkTaskRunner( |
| bool negotiated_channel_id, |
| bool channel_id_enabled) const { |
| DCHECK(OnNetworkTaskRunner()); |
| |
| RecordChannelIDSupport(channel_id_service_, negotiated_channel_id, |
| channel_id_enabled); |
| } |
| |
| int SSLClientSocketNSS::Core::DoBufferRecv(IOBuffer* read_buffer, int len) { |
| DCHECK(OnNetworkTaskRunner()); |
| DCHECK_GT(len, 0); |
| |
| if (detached_) |
| return ERR_ABORTED; |
| |
| int rv = transport_->socket()->Read( |
| read_buffer, len, |
| base::Bind(&Core::BufferRecvComplete, base::Unretained(this), |
| scoped_refptr<IOBuffer>(read_buffer))); |
| |
| if (!OnNSSTaskRunner() && rv != ERR_IO_PENDING) { |
| nss_task_runner_->PostTask( |
| FROM_HERE, base::Bind(&Core::BufferRecvComplete, this, |
| scoped_refptr<IOBuffer>(read_buffer), rv)); |
| return rv; |
| } |
| |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::Core::DoBufferSend(IOBuffer* send_buffer, int len) { |
| DCHECK(OnNetworkTaskRunner()); |
| DCHECK_GT(len, 0); |
| |
| if (detached_) |
| return ERR_ABORTED; |
| |
| int rv = transport_->socket()->Write( |
| send_buffer, len, |
| base::Bind(&Core::BufferSendComplete, |
| base::Unretained(this))); |
| |
| if (!OnNSSTaskRunner() && rv != ERR_IO_PENDING) { |
| nss_task_runner_->PostTask( |
| FROM_HERE, |
| base::Bind(&Core::BufferSendComplete, this, rv)); |
| return rv; |
| } |
| |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::Core::DoGetChannelID(const std::string& host) { |
| DCHECK(OnNetworkTaskRunner()); |
| |
| if (detached_) |
| return ERR_ABORTED; |
| |
| weak_net_log_->BeginEvent(NetLog::TYPE_SSL_GET_DOMAIN_BOUND_CERT); |
| |
| int rv = channel_id_service_->GetOrCreateChannelID( |
| host, &channel_id_key_, |
| base::Bind(&Core::OnGetChannelIDComplete, base::Unretained(this)), |
| &channel_id_request_); |
| |
| if (rv != ERR_IO_PENDING && !OnNSSTaskRunner()) { |
| nss_task_runner_->PostTask( |
| FROM_HERE, |
| base::Bind(&Core::OnHandshakeIOComplete, this, rv)); |
| return ERR_IO_PENDING; |
| } |
| |
| return rv; |
| } |
| |
| void SSLClientSocketNSS::Core::OnHandshakeStateUpdated( |
| const HandshakeState& state) { |
| DCHECK(OnNetworkTaskRunner()); |
| network_handshake_state_ = state; |
| } |
| |
| void SSLClientSocketNSS::Core::OnNSSBufferUpdated(int amount_in_read_buffer) { |
| DCHECK(OnNetworkTaskRunner()); |
| unhandled_buffer_size_ = amount_in_read_buffer; |
| } |
| |
| void SSLClientSocketNSS::Core::DidNSSRead(int result) { |
| DCHECK(OnNetworkTaskRunner()); |
| DCHECK(nss_waiting_read_); |
| nss_waiting_read_ = false; |
| if (result <= 0) { |
| nss_is_closed_ = true; |
| } else { |
| was_ever_used_ = true; |
| } |
| } |
| |
| void SSLClientSocketNSS::Core::DidNSSWrite(int result) { |
| DCHECK(OnNetworkTaskRunner()); |
| DCHECK(nss_waiting_write_); |
| nss_waiting_write_ = false; |
| if (result < 0) { |
| nss_is_closed_ = true; |
| } else if (result > 0) { |
| was_ever_used_ = true; |
| } |
| } |
| |
| void SSLClientSocketNSS::Core::BufferSendComplete(int result) { |
| if (!OnNSSTaskRunner()) { |
| if (detached_) |
| return; |
| |
| nss_task_runner_->PostTask( |
| FROM_HERE, base::Bind(&Core::BufferSendComplete, this, result)); |
| return; |
| } |
| |
| DCHECK(OnNSSTaskRunner()); |
| |
| memio_PutWriteResult(nss_bufs_, MapErrorToNSS(result)); |
| transport_send_busy_ = false; |
| OnSendComplete(result); |
| } |
| |
| void SSLClientSocketNSS::Core::OnHandshakeIOComplete(int result) { |
| if (!OnNSSTaskRunner()) { |
| if (detached_) |
| return; |
| |
| nss_task_runner_->PostTask( |
| FROM_HERE, base::Bind(&Core::OnHandshakeIOComplete, this, result)); |
| return; |
| } |
| |
| DCHECK(OnNSSTaskRunner()); |
| |
| int rv = DoHandshakeLoop(result); |
| if (rv != ERR_IO_PENDING) |
| DoConnectCallback(rv); |
| } |
| |
| void SSLClientSocketNSS::Core::OnGetChannelIDComplete(int result) { |
| DVLOG(1) << __FUNCTION__ << " " << result; |
| DCHECK(OnNetworkTaskRunner()); |
| |
| OnHandshakeIOComplete(result); |
| } |
| |
| void SSLClientSocketNSS::Core::BufferRecvComplete( |
| IOBuffer* read_buffer, |
| int result) { |
| DCHECK(read_buffer); |
| |
| if (!OnNSSTaskRunner()) { |
| if (detached_) |
| return; |
| |
| nss_task_runner_->PostTask( |
| FROM_HERE, base::Bind(&Core::BufferRecvComplete, this, |
| scoped_refptr<IOBuffer>(read_buffer), result)); |
| return; |
| } |
| |
| DCHECK(OnNSSTaskRunner()); |
| |
| if (result > 0) { |
| char* buf; |
| int nb = memio_GetReadParams(nss_bufs_, &buf); |
| CHECK_GE(nb, result); |
| memcpy(buf, read_buffer->data(), result); |
| } else if (result == 0) { |
| transport_recv_eof_ = true; |
| } |
| |
| memio_PutReadResult(nss_bufs_, MapErrorToNSS(result)); |
| transport_recv_busy_ = false; |
| OnRecvComplete(result); |
| } |
| |
| void SSLClientSocketNSS::Core::PostOrRunCallback( |
| const tracked_objects::Location& location, |
| const base::Closure& task) { |
| if (!OnNetworkTaskRunner()) { |
| network_task_runner_->PostTask( |
| FROM_HERE, |
| base::Bind(&Core::PostOrRunCallback, this, location, task)); |
| return; |
| } |
| |
| if (detached_ || task.is_null()) |
| return; |
| task.Run(); |
| } |
| |
| void SSLClientSocketNSS::Core::AddCertProvidedEvent(int cert_count) { |
| PostOrRunCallback(FROM_HERE, |
| base::Bind(&AddLogEventWithCallback, weak_net_log_, |
| NetLog::TYPE_SSL_CLIENT_CERT_PROVIDED, |
| NetLog::IntCallback("cert_count", cert_count))); |
| } |
| |
| void SSLClientSocketNSS::Core::SetChannelIDProvided() { |
| PostOrRunCallback( |
| FROM_HERE, base::Bind(&AddLogEvent, weak_net_log_, |
| NetLog::TYPE_SSL_CHANNEL_ID_PROVIDED)); |
| nss_handshake_state_.channel_id_sent = true; |
| // Update the network task runner's view of the handshake state now that |
| // channel id has been sent. |
| PostOrRunCallback( |
| FROM_HERE, base::Bind(&Core::OnHandshakeStateUpdated, this, |
| nss_handshake_state_)); |
| } |
| |
| SSLClientSocketNSS::SSLClientSocketNSS( |
| scoped_ptr<ClientSocketHandle> transport_socket, |
| const HostPortPair& host_and_port, |
| const SSLConfig& ssl_config, |
| const SSLClientSocketContext& context) |
| : transport_(std::move(transport_socket)), |
| host_and_port_(host_and_port), |
| ssl_config_(ssl_config), |
| cert_verifier_(context.cert_verifier), |
| cert_transparency_verifier_(context.cert_transparency_verifier), |
| channel_id_service_(context.channel_id_service), |
| ssl_session_cache_shard_(context.ssl_session_cache_shard), |
| completed_handshake_(false), |
| next_handshake_state_(STATE_NONE), |
| disconnected_(false), |
| nss_fd_(NULL), |
| net_log_(transport_->socket()->NetLog()), |
| transport_security_state_(context.transport_security_state), |
| policy_enforcer_(context.ct_policy_enforcer), |
| valid_thread_id_(base::kInvalidThreadId) { |
| DCHECK(cert_verifier_); |
| |
| EnterFunction(""); |
| InitCore(); |
| LeaveFunction(""); |
| } |
| |
| SSLClientSocketNSS::~SSLClientSocketNSS() { |
| EnterFunction(""); |
| Disconnect(); |
| LeaveFunction(""); |
| } |
| |
| // static |
| void SSLClientSocket::ClearSessionCache() { |
| // SSL_ClearSessionCache can't be called before NSS is initialized. Don't |
| // bother initializing NSS just to clear an empty SSL session cache. |
| if (!NSS_IsInitialized()) |
| return; |
| |
| SSL_ClearSessionCache(); |
| } |
| |
| bool SSLClientSocketNSS::GetSSLInfo(SSLInfo* ssl_info) { |
| EnterFunction(""); |
| ssl_info->Reset(); |
| if (core_->state().server_cert_chain.empty() || |
| !core_->state().server_cert_chain[0]) { |
| return false; |
| } |
| |
| ssl_info->cert_status = server_cert_verify_result_.cert_status; |
| ssl_info->cert = server_cert_verify_result_.verified_cert; |
| ssl_info->unverified_cert = core_->state().server_cert; |
| |
| AddSCTInfoToSSLInfo(ssl_info); |
| |
| ssl_info->connection_status = |
| core_->state().ssl_connection_status; |
| ssl_info->public_key_hashes = server_cert_verify_result_.public_key_hashes; |
| ssl_info->is_issued_by_known_root = |
| server_cert_verify_result_.is_issued_by_known_root; |
| ssl_info->client_cert_sent = |
| ssl_config_.send_client_cert && ssl_config_.client_cert.get(); |
| ssl_info->channel_id_sent = core_->state().channel_id_sent; |
| ssl_info->pinning_failure_log = pinning_failure_log_; |
| |
| PRUint16 cipher_suite = SSLConnectionStatusToCipherSuite( |
| core_->state().ssl_connection_status); |
| SSLCipherSuiteInfo cipher_info; |
| SECStatus ok = SSL_GetCipherSuiteInfo(cipher_suite, |
| &cipher_info, sizeof(cipher_info)); |
| if (ok == SECSuccess) { |
| ssl_info->security_bits = cipher_info.effectiveKeyBits; |
| } else { |
| ssl_info->security_bits = -1; |
| LOG(DFATAL) << "SSL_GetCipherSuiteInfo returned " << PR_GetError() |
| << " for cipherSuite " << cipher_suite; |
| } |
| |
| ssl_info->handshake_type = core_->state().resumed_handshake ? |
| SSLInfo::HANDSHAKE_RESUME : SSLInfo::HANDSHAKE_FULL; |
| |
| LeaveFunction(""); |
| return true; |
| } |
| |
| void SSLClientSocketNSS::GetConnectionAttempts(ConnectionAttempts* out) const { |
| out->clear(); |
| } |
| |
| int64_t SSLClientSocketNSS::GetTotalReceivedBytes() const { |
| NOTIMPLEMENTED(); |
| return 0; |
| } |
| |
| void SSLClientSocketNSS::GetSSLCertRequestInfo( |
| SSLCertRequestInfo* cert_request_info) { |
| EnterFunction(""); |
| cert_request_info->host_and_port = host_and_port_; |
| cert_request_info->cert_authorities = core_->state().cert_authorities; |
| LeaveFunction(""); |
| } |
| |
| int SSLClientSocketNSS::ExportKeyingMaterial(const base::StringPiece& label, |
| bool has_context, |
| const base::StringPiece& context, |
| unsigned char* out, |
| unsigned int outlen) { |
| if (!IsConnected()) |
| return ERR_SOCKET_NOT_CONNECTED; |
| |
| // SSL_ExportKeyingMaterial may block the current thread if |core_| is in |
| // the midst of a handshake. |
| SECStatus result = SSL_ExportKeyingMaterial( |
| nss_fd_, label.data(), label.size(), has_context, |
| reinterpret_cast<const unsigned char*>(context.data()), |
| context.length(), out, outlen); |
| if (result != SECSuccess) { |
| LogFailedNSSFunction(net_log_, "SSL_ExportKeyingMaterial", ""); |
| return MapNSSError(PORT_GetError()); |
| } |
| return OK; |
| } |
| |
| int SSLClientSocketNSS::GetTLSUniqueChannelBinding(std::string* out) { |
| if (!IsConnected()) |
| return ERR_SOCKET_NOT_CONNECTED; |
| unsigned char buf[64]; |
| unsigned int len; |
| SECStatus result = SSL_GetChannelBinding(nss_fd_, |
| SSL_CHANNEL_BINDING_TLS_UNIQUE, |
| buf, &len, arraysize(buf)); |
| if (result != SECSuccess) { |
| LogFailedNSSFunction(net_log_, "SSL_GetChannelBinding", ""); |
| return MapNSSError(PORT_GetError()); |
| } |
| out->assign(reinterpret_cast<char*>(buf), len); |
| return OK; |
| } |
| |
| SSLClientSocket::NextProtoStatus SSLClientSocketNSS::GetNextProto( |
| std::string* proto) const { |
| *proto = core_->state().next_proto; |
| return core_->state().next_proto_status; |
| } |
| |
| int SSLClientSocketNSS::Connect(const CompletionCallback& callback) { |
| EnterFunction(""); |
| DCHECK(transport_.get()); |
| // It is an error to create an SSLClientSocket whose context has no |
| // TransportSecurityState. |
| DCHECK(transport_security_state_); |
| DCHECK_EQ(STATE_NONE, next_handshake_state_); |
| DCHECK(user_connect_callback_.is_null()); |
| DCHECK(!callback.is_null()); |
| |
| // Although StreamSocket does allow calling Connect() after Disconnect(), |
| // this has never worked for layered sockets. CHECK to detect any consumers |
| // reconnecting an SSL socket. |
| // |
| // TODO(davidben,mmenke): Remove this API feature. See |
| // https://crbug.com/499289. |
| CHECK(!disconnected_); |
| |
| EnsureThreadIdAssigned(); |
| |
| net_log_.BeginEvent(NetLog::TYPE_SSL_CONNECT); |
| |
| int rv = Init(); |
| if (rv != OK) { |
| net_log_.EndEventWithNetErrorCode(NetLog::TYPE_SSL_CONNECT, rv); |
| return rv; |
| } |
| |
| rv = InitializeSSLOptions(); |
| if (rv != OK) { |
| net_log_.EndEventWithNetErrorCode(NetLog::TYPE_SSL_CONNECT, rv); |
| return rv; |
| } |
| |
| rv = InitializeSSLPeerName(); |
| if (rv != OK) { |
| net_log_.EndEventWithNetErrorCode(NetLog::TYPE_SSL_CONNECT, rv); |
| return rv; |
| } |
| |
| GotoState(STATE_HANDSHAKE); |
| |
| rv = DoHandshakeLoop(OK); |
| if (rv == ERR_IO_PENDING) { |
| user_connect_callback_ = callback; |
| } else { |
| net_log_.EndEventWithNetErrorCode(NetLog::TYPE_SSL_CONNECT, rv); |
| } |
| |
| LeaveFunction(""); |
| return rv > OK ? OK : rv; |
| } |
| |
| void SSLClientSocketNSS::Disconnect() { |
| EnterFunction(""); |
| |
| CHECK(CalledOnValidThread()); |
| |
| // Shut down anything that may call us back. |
| core_->Detach(); |
| cert_verifier_request_.reset(); |
| transport_->socket()->Disconnect(); |
| |
| disconnected_ = true; |
| |
| // Reset object state. |
| user_connect_callback_.Reset(); |
| server_cert_verify_result_.Reset(); |
| completed_handshake_ = false; |
| start_cert_verification_time_ = base::TimeTicks(); |
| InitCore(); |
| |
| LeaveFunction(""); |
| } |
| |
| bool SSLClientSocketNSS::IsConnected() const { |
| EnterFunction(""); |
| bool ret = completed_handshake_ && |
| (core_->HasPendingAsyncOperation() || |
| (core_->IsConnected() && core_->HasUnhandledReceivedData()) || |
| transport_->socket()->IsConnected()); |
| LeaveFunction(""); |
| return ret; |
| } |
| |
| bool SSLClientSocketNSS::IsConnectedAndIdle() const { |
| EnterFunction(""); |
| bool ret = completed_handshake_ && |
| !core_->HasPendingAsyncOperation() && |
| !(core_->IsConnected() && core_->HasUnhandledReceivedData()) && |
| transport_->socket()->IsConnectedAndIdle(); |
| LeaveFunction(""); |
| return ret; |
| } |
| |
| int SSLClientSocketNSS::GetPeerAddress(IPEndPoint* address) const { |
| return transport_->socket()->GetPeerAddress(address); |
| } |
| |
| int SSLClientSocketNSS::GetLocalAddress(IPEndPoint* address) const { |
| return transport_->socket()->GetLocalAddress(address); |
| } |
| |
| const BoundNetLog& SSLClientSocketNSS::NetLog() const { |
| return net_log_; |
| } |
| |
| void SSLClientSocketNSS::SetSubresourceSpeculation() { |
| if (transport_.get() && transport_->socket()) { |
| transport_->socket()->SetSubresourceSpeculation(); |
| } else { |
| NOTREACHED(); |
| } |
| } |
| |
| void SSLClientSocketNSS::SetOmniboxSpeculation() { |
| if (transport_.get() && transport_->socket()) { |
| transport_->socket()->SetOmniboxSpeculation(); |
| } else { |
| NOTREACHED(); |
| } |
| } |
| |
| bool SSLClientSocketNSS::WasEverUsed() const { |
| DCHECK(core_.get()); |
| |
| return core_->WasEverUsed(); |
| } |
| |
| bool SSLClientSocketNSS::UsingTCPFastOpen() const { |
| if (transport_.get() && transport_->socket()) { |
| return transport_->socket()->UsingTCPFastOpen(); |
| } |
| NOTREACHED(); |
| return false; |
| } |
| |
| int SSLClientSocketNSS::Read(IOBuffer* buf, int buf_len, |
| const CompletionCallback& callback) { |
| DCHECK(core_.get()); |
| DCHECK(!callback.is_null()); |
| |
| EnterFunction(buf_len); |
| int rv = core_->Read(buf, buf_len, callback); |
| LeaveFunction(rv); |
| |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::Write(IOBuffer* buf, int buf_len, |
| const CompletionCallback& callback) { |
| DCHECK(core_.get()); |
| DCHECK(!callback.is_null()); |
| |
| EnterFunction(buf_len); |
| int rv = core_->Write(buf, buf_len, callback); |
| LeaveFunction(rv); |
| |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::SetReceiveBufferSize(int32_t size) { |
| return transport_->socket()->SetReceiveBufferSize(size); |
| } |
| |
| int SSLClientSocketNSS::SetSendBufferSize(int32_t size) { |
| return transport_->socket()->SetSendBufferSize(size); |
| } |
| |
| int SSLClientSocketNSS::Init() { |
| EnterFunction(""); |
| // Initialize the NSS SSL library in a threadsafe way. This also |
| // initializes the NSS base library. |
| EnsureNSSSSLInit(); |
| if (!NSS_IsInitialized()) |
| return ERR_UNEXPECTED; |
| #if defined(USE_NSS_CERTS) || defined(OS_IOS) |
| if (ssl_config_.cert_io_enabled) { |
| // We must call EnsureNSSHttpIOInit() here, on the IO thread, to get the IO |
| // loop by MessageLoopForIO::current(). |
| // X509Certificate::Verify() runs on a worker thread of CertVerifier. |
| EnsureNSSHttpIOInit(); |
| } |
| #endif |
| |
| LeaveFunction(""); |
| return OK; |
| } |
| |
| void SSLClientSocketNSS::InitCore() { |
| // TODO(davidben): Both task runners are now always the same. Unwind this code |
| // further, although the entire class is due to be deleted eventually, so it |
| // may not be worth bothering. |
| core_ = new Core(base::ThreadTaskRunnerHandle::Get().get(), |
| base::ThreadTaskRunnerHandle::Get().get(), transport_.get(), |
| host_and_port_, ssl_config_, &net_log_, channel_id_service_); |
| } |
| |
| int SSLClientSocketNSS::InitializeSSLOptions() { |
| // Transport connected, now hook it up to nss |
| nss_fd_ = memio_CreateIOLayer(kRecvBufferSize, kSendBufferSize); |
| if (nss_fd_ == NULL) { |
| return ERR_OUT_OF_MEMORY; // TODO(port): map NSPR error code. |
| } |
| |
| // Grab pointer to buffers |
| memio_Private* nss_bufs = memio_GetSecret(nss_fd_); |
| |
| /* Create SSL state machine */ |
| /* Push SSL onto our fake I/O socket */ |
| if (SSL_ImportFD(GetNSSModelSocket(), nss_fd_) == NULL) { |
| LogFailedNSSFunction(net_log_, "SSL_ImportFD", ""); |
| PR_Close(nss_fd_); |
| nss_fd_ = NULL; |
| return ERR_OUT_OF_MEMORY; // TODO(port): map NSPR/NSS error code. |
| } |
| // TODO(port): set more ssl options! Check errors! |
| |
| int rv; |
| |
| rv = SSL_OptionSet(nss_fd_, SSL_SECURITY, PR_TRUE); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(net_log_, "SSL_OptionSet", "SSL_SECURITY"); |
| return ERR_UNEXPECTED; |
| } |
| |
| rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_SSL2, PR_FALSE); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(net_log_, "SSL_OptionSet", "SSL_ENABLE_SSL2"); |
| return ERR_UNEXPECTED; |
| } |
| |
| // Don't do V2 compatible hellos because they don't support TLS extensions. |
| rv = SSL_OptionSet(nss_fd_, SSL_V2_COMPATIBLE_HELLO, PR_FALSE); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(net_log_, "SSL_OptionSet", "SSL_V2_COMPATIBLE_HELLO"); |
| return ERR_UNEXPECTED; |
| } |
| |
| SSLVersionRange version_range; |
| version_range.min = ssl_config_.version_min; |
| version_range.max = ssl_config_.version_max; |
| rv = SSL_VersionRangeSet(nss_fd_, &version_range); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(net_log_, "SSL_VersionRangeSet", ""); |
| return ERR_NO_SSL_VERSIONS_ENABLED; |
| } |
| |
| if (ssl_config_.require_ecdhe) { |
| const PRUint16* const ssl_ciphers = SSL_GetImplementedCiphers(); |
| const PRUint16 num_ciphers = SSL_GetNumImplementedCiphers(); |
| |
| // Iterate over the cipher suites and disable those that don't use ECDHE. |
| for (unsigned i = 0; i < num_ciphers; i++) { |
| SSLCipherSuiteInfo info; |
| if (SSL_GetCipherSuiteInfo(ssl_ciphers[i], &info, sizeof(info)) == |
| SECSuccess) { |
| if (strcmp(info.keaTypeName, "ECDHE") != 0) { |
| SSL_CipherPrefSet(nss_fd_, ssl_ciphers[i], PR_FALSE); |
| } |
| } |
| } |
| } |
| |
| if (ssl_config_.version_fallback) { |
| rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_FALLBACK_SCSV, PR_TRUE); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction( |
| net_log_, "SSL_OptionSet", "SSL_ENABLE_FALLBACK_SCSV"); |
| } |
| } |
| |
| for (std::vector<uint16_t>::const_iterator it = |
| ssl_config_.disabled_cipher_suites.begin(); |
| it != ssl_config_.disabled_cipher_suites.end(); ++it) { |
| // This will fail if the specified cipher is not implemented by NSS, but |
| // the failure is harmless. |
| SSL_CipherPrefSet(nss_fd_, *it, PR_FALSE); |
| } |
| |
| const PRUint16* const ssl_ciphers = SSL_GetImplementedCiphers(); |
| const PRUint16 num_ciphers = SSL_GetNumImplementedCiphers(); |
| for (int i = 0; i < num_ciphers; i++) { |
| SSLCipherSuiteInfo info; |
| if (SSL_GetCipherSuiteInfo(ssl_ciphers[i], &info, sizeof(info)) != |
| SECSuccess) { |
| continue; |
| } |
| if (info.symCipher == ssl_calg_rc4 && |
| !(ssl_config_.rc4_enabled && |
| ssl_config_.deprecated_cipher_suites_enabled)) { |
| SSL_CipherPrefSet(nss_fd_, ssl_ciphers[i], PR_FALSE); |
| } |
| if (info.keaType == ssl_kea_dh && |
| !ssl_config_.deprecated_cipher_suites_enabled) { |
| // Only offer DHE on the second handshake. https://crbug.com/538690 |
| SSL_CipherPrefSet(nss_fd_, ssl_ciphers[i], PR_FALSE); |
| } |
| } |
| |
| // Support RFC 5077 |
| rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_SESSION_TICKETS, PR_TRUE); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction( |
| net_log_, "SSL_OptionSet", "SSL_ENABLE_SESSION_TICKETS"); |
| } |
| |
| rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_FALSE_START, |
| ssl_config_.false_start_enabled); |
| if (rv != SECSuccess) |
| LogFailedNSSFunction(net_log_, "SSL_OptionSet", "SSL_ENABLE_FALSE_START"); |
| |
| // By default, renegotiations are rejected. After the initial handshake |
| // completes, some application protocols may re-enable it. |
| rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_RENEGOTIATION, SSL_RENEGOTIATE_NEVER); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction( |
| net_log_, "SSL_OptionSet", "SSL_ENABLE_RENEGOTIATION"); |
| } |
| |
| rv = SSL_OptionSet(nss_fd_, SSL_CBC_RANDOM_IV, PR_TRUE); |
| if (rv != SECSuccess) |
| LogFailedNSSFunction(net_log_, "SSL_OptionSet", "SSL_CBC_RANDOM_IV"); |
| |
| // Added in NSS 3.15 |
| #ifdef SSL_ENABLE_OCSP_STAPLING |
| // Request OCSP stapling even on platforms that don't support it, in |
| // order to extract Certificate Transparency information. |
| rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_OCSP_STAPLING, |
| cert_verifier_->SupportsOCSPStapling() || |
| ssl_config_.signed_cert_timestamps_enabled); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(net_log_, "SSL_OptionSet", |
| "SSL_ENABLE_OCSP_STAPLING"); |
| } |
| #endif |
| |
| rv = SSL_OptionSet(nss_fd_, SSL_ENABLE_SIGNED_CERT_TIMESTAMPS, |
| ssl_config_.signed_cert_timestamps_enabled); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(net_log_, "SSL_OptionSet", |
| "SSL_ENABLE_SIGNED_CERT_TIMESTAMPS"); |
| } |
| |
| rv = SSL_OptionSet(nss_fd_, SSL_HANDSHAKE_AS_CLIENT, PR_TRUE); |
| if (rv != SECSuccess) { |
| LogFailedNSSFunction(net_log_, "SSL_OptionSet", "SSL_HANDSHAKE_AS_CLIENT"); |
| return ERR_UNEXPECTED; |
| } |
| |
| if (!core_->Init(nss_fd_, nss_bufs)) |
| return ERR_UNEXPECTED; |
| |
| // Tell SSL the hostname we're trying to connect to. |
| SSL_SetURL(nss_fd_, host_and_port_.host().c_str()); |
| |
| // Tell SSL we're a client; needed if not letting NSPR do socket I/O |
| SSL_ResetHandshake(nss_fd_, PR_FALSE); |
| |
| return OK; |
| } |
| |
| int SSLClientSocketNSS::InitializeSSLPeerName() { |
| // Tell NSS who we're connected to |
| IPEndPoint peer_address; |
| int err = transport_->socket()->GetPeerAddress(&peer_address); |
| if (err != OK) |
| return err; |
| |
| SockaddrStorage storage; |
| if (!peer_address.ToSockAddr(storage.addr, &storage.addr_len)) |
| return ERR_ADDRESS_INVALID; |
| |
| PRNetAddr peername; |
| memset(&peername, 0, sizeof(peername)); |
| DCHECK_LE(static_cast<size_t>(storage.addr_len), sizeof(peername)); |
| size_t len = std::min(static_cast<size_t>(storage.addr_len), |
| sizeof(peername)); |
| memcpy(&peername, storage.addr, len); |
| |
| // Adjust the address family field for BSD, whose sockaddr |
| // structure has a one-byte length and one-byte address family |
| // field at the beginning. PRNetAddr has a two-byte address |
| // family field at the beginning. |
| peername.raw.family = storage.addr->sa_family; |
| |
| memio_SetPeerName(nss_fd_, &peername); |
| |
| // Set the peer ID for session reuse. This is necessary when we create an |
| // SSL tunnel through a proxy -- GetPeerName returns the proxy's address |
| // rather than the destination server's address in that case. |
| std::string peer_id = host_and_port_.ToString(); |
| // Append |ssl_session_cache_shard_| to the peer id. This is used to partition |
| // the session cache for incognito mode. |
| peer_id += "/" + ssl_session_cache_shard_; |
| peer_id += "/"; |
| // Shard the session cache based on maximum protocol version. This causes |
| // fallback connections to use a separate session cache. |
| switch (ssl_config_.version_max) { |
| case SSL_PROTOCOL_VERSION_TLS1: |
| peer_id += "tls1"; |
| break; |
| case SSL_PROTOCOL_VERSION_TLS1_1: |
| peer_id += "tls1.1"; |
| break; |
| case SSL_PROTOCOL_VERSION_TLS1_2: |
| peer_id += "tls1.2"; |
| break; |
| default: |
| NOTREACHED(); |
| } |
| peer_id += "/"; |
| if (ssl_config_.deprecated_cipher_suites_enabled) |
| peer_id += "deprecated"; |
| |
| peer_id += "/"; |
| if (ssl_config_.channel_id_enabled) |
| peer_id += "channelid"; |
| |
| SECStatus rv = SSL_SetSockPeerID(nss_fd_, const_cast<char*>(peer_id.c_str())); |
| if (rv != SECSuccess) |
| LogFailedNSSFunction(net_log_, "SSL_SetSockPeerID", peer_id.c_str()); |
| |
| return OK; |
| } |
| |
| void SSLClientSocketNSS::DoConnectCallback(int rv) { |
| EnterFunction(rv); |
| DCHECK_NE(ERR_IO_PENDING, rv); |
| DCHECK(!user_connect_callback_.is_null()); |
| |
| base::ResetAndReturn(&user_connect_callback_).Run(rv > OK ? OK : rv); |
| LeaveFunction(""); |
| } |
| |
| void SSLClientSocketNSS::OnHandshakeIOComplete(int result) { |
| EnterFunction(result); |
| int rv = DoHandshakeLoop(result); |
| if (rv != ERR_IO_PENDING) { |
| net_log_.EndEventWithNetErrorCode(NetLog::TYPE_SSL_CONNECT, rv); |
| DoConnectCallback(rv); |
| } |
| LeaveFunction(""); |
| } |
| |
| int SSLClientSocketNSS::DoHandshakeLoop(int last_io_result) { |
| EnterFunction(last_io_result); |
| int rv = last_io_result; |
| do { |
| // Default to STATE_NONE for next state. |
| // (This is a quirk carried over from the windows |
| // implementation. It makes reading the logs a bit harder.) |
| // State handlers can and often do call GotoState just |
| // to stay in the current state. |
| State state = next_handshake_state_; |
| GotoState(STATE_NONE); |
| switch (state) { |
| case STATE_HANDSHAKE: |
| rv = DoHandshake(); |
| break; |
| case STATE_HANDSHAKE_COMPLETE: |
| rv = DoHandshakeComplete(rv); |
| break; |
| case STATE_VERIFY_CERT: |
| DCHECK(rv == OK); |
| rv = DoVerifyCert(rv); |
| break; |
| case STATE_VERIFY_CERT_COMPLETE: |
| rv = DoVerifyCertComplete(rv); |
| break; |
| case STATE_NONE: |
| default: |
| rv = ERR_UNEXPECTED; |
| LOG(DFATAL) << "unexpected state " << state; |
| break; |
| } |
| } while (rv != ERR_IO_PENDING && next_handshake_state_ != STATE_NONE); |
| LeaveFunction(""); |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::DoHandshake() { |
| EnterFunction(""); |
| |
| int rv = core_->Connect( |
| base::Bind(&SSLClientSocketNSS::OnHandshakeIOComplete, |
| base::Unretained(this))); |
| GotoState(STATE_HANDSHAKE_COMPLETE); |
| |
| LeaveFunction(rv); |
| return rv; |
| } |
| |
| int SSLClientSocketNSS::DoHandshakeComplete(int result) { |
| EnterFunction(result); |
| |
| if (result == OK) { |
| if (ssl_config_.version_fallback && |
| ssl_config_.version_max < ssl_config_.version_fallback_min) { |
| return ERR_SSL_FALLBACK_BEYOND_MINIMUM_VERSION; |
| } |
| |
| RecordNegotiationExtension(); |
| |
| // SSL handshake is completed. Let's verify the certificate. |
| GotoState(STATE_VERIFY_CERT); |
| // Done! |
| } |
| set_signed_cert_timestamps_received( |
| !core_->state().sct_list_from_tls_extension.empty()); |
| set_stapled_ocsp_response_received( |
| !core_->state().stapled_ocsp_response.empty()); |
| set_negotiation_extension(core_->state().negotiation_extension_); |
| |
| LeaveFunction(result); |
| return result; |
| } |
| |
| int SSLClientSocketNSS::DoVerifyCert(int result) { |
| DCHECK(!core_->state().server_cert_chain.empty()); |
| DCHECK(core_->state().server_cert_chain[0]); |
| |
| GotoState(STATE_VERIFY_CERT_COMPLETE); |
| |
| // NSS decoded the certificate, but the platform certificate implementation |
| // could not. This is treated as a fatal SSL-level protocol error rather than |
| // a certificate error. See https://crbug.com/91341. |
| if (!core_->state().server_cert.get()) |
| return ERR_SSL_SERVER_CERT_BAD_FORMAT; |
| |
| // If the certificate is expected to be bad we can use the expectation as |
| // the cert status. |
| base::StringPiece der_cert( |
| reinterpret_cast<char*>( |
| core_->state().server_cert_chain[0]->derCert.data), |
| core_->state().server_cert_chain[0]->derCert.len); |
| CertStatus cert_status; |
| if (ssl_config_.IsAllowedBadCert(der_cert, &cert_status)) { |
| DCHECK(start_cert_verification_time_.is_null()); |
| VLOG(1) << "Received an expected bad cert with status: " << cert_status; |
| server_cert_verify_result_.Reset(); |
| server_cert_verify_result_.cert_status = cert_status; |
| server_cert_verify_result_.verified_cert = core_->state().server_cert; |
| return OK; |
| } |
| |
| start_cert_verification_time_ = base::TimeTicks::Now(); |
| |
| return cert_verifier_->Verify( |
| core_->state().server_cert.get(), host_and_port_.host(), |
| core_->state().stapled_ocsp_response, ssl_config_.GetCertVerifyFlags(), |
| SSLConfigService::GetCRLSet().get(), &server_cert_verify_result_, |
| base::Bind(&SSLClientSocketNSS::OnHandshakeIOComplete, |
| base::Unretained(this)), |
| &cert_verifier_request_, net_log_); |
| } |
| |
| // Derived from AuthCertificateCallback() in |
| // mozilla/source/security/manager/ssl/src/nsNSSCallbacks.cpp. |
| int SSLClientSocketNSS::DoVerifyCertComplete(int result) { |
| cert_verifier_request_.reset(); |
| |
| if (!start_cert_verification_time_.is_null()) { |
| base::TimeDelta verify_time = |
| base::TimeTicks::Now() - start_cert_verification_time_; |
| if (result == OK) |
| UMA_HISTOGRAM_TIMES("Net.SSLCertVerificationTime", verify_time); |
| else |
| UMA_HISTOGRAM_TIMES("Net.SSLCertVerificationTimeError", verify_time); |
| } |
| |
| // We used to remember the intermediate CA certs in the NSS database |
| // persistently. However, NSS opens a connection to the SQLite database |
| // during NSS initialization and doesn't close the connection until NSS |
| // shuts down. If the file system where the database resides is gone, |
| // the database connection goes bad. What's worse, the connection won't |
| // recover when the file system comes back. Until this NSS or SQLite bug |
| // is fixed, we need to avoid using the NSS database for non-essential |
| // purposes. See https://bugzilla.mozilla.org/show_bug.cgi?id=508081 and |
| // http://crbug.com/15630 for more info. |
| |
| const CertStatus cert_status = server_cert_verify_result_.cert_status; |
| if (transport_security_state_ && |
| (result == OK || |
| (IsCertificateError(result) && IsCertStatusMinorError(cert_status))) && |
| !transport_security_state_->CheckPublicKeyPins( |
| host_and_port_, server_cert_verify_result_.is_issued_by_known_root, |
| server_cert_verify_result_.public_key_hashes, |
| core_->state().server_cert.get(), |
| server_cert_verify_result_.verified_cert.get(), |
| TransportSecurityState::ENABLE_PIN_REPORTS, &pinning_failure_log_)) { |
| result = ERR_SSL_PINNED_KEY_NOT_IN_CERT_CHAIN; |
| } |
| |
| if (result == OK) { |
| // Only check Certificate Transparency if there were no other errors with |
| // the connection. |
| VerifyCT(); |
| |
| // Only cache the session if the certificate verified successfully. |
| core_->CacheSessionIfNecessary(); |
| } |
| |
| completed_handshake_ = true; |
| |
| // Exit DoHandshakeLoop and return the result to the caller to Connect. |
| DCHECK_EQ(STATE_NONE, next_handshake_state_); |
| return result; |
| } |
| |
| void SSLClientSocketNSS::VerifyCT() { |
| if (!cert_transparency_verifier_) |
| return; |
| |
| // Note that this is a completely synchronous operation: The CT Log Verifier |
| // gets all the data it needs for SCT verification and does not do any |
| // external communication. |
| cert_transparency_verifier_->Verify( |
| server_cert_verify_result_.verified_cert.get(), |
| core_->state().stapled_ocsp_response, |
| core_->state().sct_list_from_tls_extension, &ct_verify_result_, net_log_); |
| // TODO(ekasper): wipe stapled_ocsp_response and sct_list_from_tls_extension |
| // from the state after verification is complete, to conserve memory. |
| |
| if (policy_enforcer_ && |
| (server_cert_verify_result_.cert_status & CERT_STATUS_IS_EV)) { |
| scoped_refptr<ct::EVCertsWhitelist> ev_whitelist = |
| SSLConfigService::GetEVCertsWhitelist(); |
| if (!policy_enforcer_->DoesConformToCTEVPolicy( |
| server_cert_verify_result_.verified_cert.get(), ev_whitelist.get(), |
| ct_verify_result_, net_log_)) { |
| // TODO(eranm): Log via the BoundNetLog, see crbug.com/437766 |
| VLOG(1) << "EV certificate for " |
| << server_cert_verify_result_.verified_cert->subject() |
| .GetDisplayName() |
| << " does not conform to CT policy, removing EV status."; |
| server_cert_verify_result_.cert_status |= |
| CERT_STATUS_CT_COMPLIANCE_FAILED; |
| server_cert_verify_result_.cert_status &= ~CERT_STATUS_IS_EV; |
| } |
| } |
| } |
| |
| void SSLClientSocketNSS::EnsureThreadIdAssigned() const { |
| base::AutoLock auto_lock(lock_); |
| if (valid_thread_id_ != base::kInvalidThreadId) |
| return; |
| valid_thread_id_ = base::PlatformThread::CurrentId(); |
| } |
| |
| bool SSLClientSocketNSS::CalledOnValidThread() const { |
| EnsureThreadIdAssigned(); |
| base::AutoLock auto_lock(lock_); |
| return valid_thread_id_ == base::PlatformThread::CurrentId(); |
| } |
| |
| void SSLClientSocketNSS::AddSCTInfoToSSLInfo(SSLInfo* ssl_info) const { |
| ssl_info->UpdateSignedCertificateTimestamps(ct_verify_result_); |
| } |
| |
| // static |
| void SSLClientSocketNSS::ReorderNextProtos(NextProtoVector* next_protos) { |
| if (next_protos->size() < 2) { |
| return; |
| } |
| |
| NextProto fallback_proto = next_protos->back(); |
| for (size_t i = next_protos->size() - 1; i > 0; --i) { |
| (*next_protos)[i] = (*next_protos)[i - 1]; |
| } |
| (*next_protos)[0] = fallback_proto; |
| } |
| |
| ChannelIDService* SSLClientSocketNSS::GetChannelIDService() const { |
| return channel_id_service_; |
| } |
| |
| SSLFailureState SSLClientSocketNSS::GetSSLFailureState() const { |
| if (completed_handshake_) |
| return SSL_FAILURE_NONE; |
| return SSL_FAILURE_UNKNOWN; |
| } |
| |
| } // namespace net |