| 2021-04-02 Ben Wagner <bungeman@chromium.org> |
| |
| [truetype] Prevent glyph program state from persisting. |
| |
| `FDEF` instructions are specified as allowed only in 'prep' or |
| 'fpgm'. FreeType has attempted to prevent their use in the glyph |
| program, but they were still allowed in glyph programs if defined in |
| a function defined in 'prep' or 'fpgm' and called from the glyph |
| program. |
| |
| Similarly, `IDEF` instructions are specified not to be able to |
| modify any existing instruction. FreeType has attempted to prevent |
| their use in the glyph program, but they can still be used like |
| `FDEF`. |
| |
| This change stores the initial bytecode range type and disallows the |
| use of `FDEF` and `IDEF` while running the glyph program. |
| |
| Most other state is copied from the `TT_Size` into the execution |
| context. However, it is possible for a glyph program to use `WS` to |
| write to the storage area or `WCVTP`, `WCVTF`, and `DELTAC[123]` to |
| write to the control value table. |
| |
| Allowing any change to the global state from the glyph program is |
| problematic as the outlines of any given glyph may change based on |
| the order the glyphs are loaded or even how many times they are |
| loaded. There exist fonts that write to the storage area or the |
| control value table in the glyph program, so their use should not be |
| an error. |
| |
| Possible solutions to using these in the glyph program are |
| |
| * ignore the writes; |
| * value-level copy on write, discard modified values when finished; |
| * array-level copy on write, discard the copy when finished; |
| * array-level copy up-front. |
| |
| Ignoring the writes may break otherwise good uses. A full copy |
| up-front was implemented, but was quite heavy as even well behaved |
| fonts required a full copy and the memory management that goes along |
| with it. Value-level copy on write could use less memory but |
| requires a great deal more record keeping and complexity. This |
| change implements array-level copy on write. If any attempt is made |
| to write to the control value table or the storage area when the |
| initial bytecode range was in a glyph program, the relevant array |
| will be copied to a designated storage area and the copy used for |
| the rest of the glyph program's execution. |
| |
| * src/truetype/ttinterp.h (TT_ExecContextRec): New fields |
| `iniRange`, `glyfCvtSize`, `glyfCvt`, `origCvt`, `glyfStoreSize`, |
| `glyfStorage`, and `origStorage`. |
| |
| * src/truetype/ttinterp.c (Modify_CVT_Check): New function to handle |
| `exc->glyfCvt`. |
| (Write_CVT, Write_CVT_Stretched, Move_CVT, Move_CVT_Stretched): Use |
| it. |
| (Ins_WS): Handle `exc->glyfStorage`. |
| (Ins_FDEF, Ins_IDEF): Updated. |
| (TT_RunIns): Updated. |
| (TT_Done_Context): Free 'glyf' CVT working and storage area. |
| (TT_Load_Context): Fix/add casts. |
| |
| * src/truetype/ttgload.c (TT_Load_Simple_Glyph): Fix cast. |
| |
| 2021-03-30 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Check validity of pointer location of `read_color_line`. |
| |
| * src/sfnt/ttcolr.c (get_child_table_pointer): New function to fetch |
| child table pointer early for all paint formats that compute a child |
| table pointer. |
| (read_color_line, read_paint): Updated. |
| (tt_face_get_colorline_stops): Check `colr->table`. |
| |
| 2021-03-28 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [docs] Update docwriter stylesheet for 1.3.1. |
| |
| This change is required to support docwriter 1.3.1. |
| |
| See |
| |
| https://gitlab.freedesktop.org/freetype/docwriter/-/merge_requests/101 |
| |
| for more information. |
| |
| * docs/markdown/stylesheets/extra.css: |
| (.wy-nav-content, .md-sidebar--secondary): Remove. |
| |
| 2021-03-16 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/sfnt/pngshim.c (Load_SBit_Png): Free `rows` once later. |
| |
| 2021-03-16 Ben Wagner <bungeman@google.com> |
| |
| [sfnt] Fix memory leak in png loading. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/chromium/issues/detail?id=1182552 |
| |
| Memory is allocated and the pointer assigned to `rows` inside a |
| 'setjmp' scope. This memory must be freed outside the 'setjmp' |
| scope after a 'longjmp'. Since `rows` is a local and modified |
| inside the 'setjmp' scope it must be marked volatile or it will have |
| an indeterminate value after the 'longjmp'. |
| |
| * src/sfnt/pngshim.c (Load_SBit_Png): Fix memory leak of `rows`. |
| |
| 2021-03-16 Christopher Degawa <ccom@randomderp.com> |
| |
| * CMakeLists.txt: Don't limit generation of 'pkg-config' file to UNIX. |
| |
| mingw-w64 uses the 'pkg-config' files but does not set UNIX. |
| |
| 2021-03-11 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/smooth/ftgrays.c (gray_set_cell): Refactor to fix VC++ warning. |
| |
| 2021-03-13 Werner Lemberg <wl@gnu.org> |
| |
| Handle various VC++ compiler warnings. |
| |
| Fixes #1039. |
| |
| * src/base/ftstroke.c (ft_stroker_inside, ft_stroker_outside): |
| Initialize `sigma`. |
| |
| * src/sdf/ftsdf.c (sdf_generate_with_overlaps): Exit immediately if |
| function arguments are invalid. |
| * src/sdf/ftsdfrend.c (sdf_property_set) <"overlaps">: Fix cast. |
| |
| * src/sfnt/sfwoff2.c (woff2_decompress) |
| [!FT_CONFIG_OPTION_USE_BROTLI]: Use `FT_UNUSED`. |
| |
| * src/truetype/ttgxvar.c (TT_Get_MM_Var): Initialize `fvar_head`. |
| |
| 2021-03-11 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Reduce copying during integration phase. |
| |
| We now record `cover' and `area' directly into the linked list. This |
| makes rendering faster by 10% or even more at larger sizes. |
| |
| * src/smooth/ftgrays.c (FT_INTEGRATE): Write directly. |
| (gray_TWorker): Add direct cell reference and remove unused fields. |
| (gray_set_cell): Consolidate the linked list management and pointers. |
| (gray_convert_glyph, gray_convert_glyph_inner): Updated. |
| |
| 2021-03-10 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/smooth/ftgrays.c (FT_INTEGRATE): New convenience macro. |
| (gray_render_line, gray_render_scanline): Use it. |
| |
| 2021-03-09 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/smooth/ftgrays.c (gray_render_line): Rearrange conditionals. |
| |
| These produce faster or more optimizable code. |
| |
| 2021-03-08 Tim-Philipp Müller <tim@centricular.com> |
| |
| [meson] Fix 'mmap' handling on Windows. |
| |
| * meson.build (ft2_sources): Always use `windows/ftsystem.c` on |
| Windows unless mmap has been disabled. |
| |
| https://gitlab.freedesktop.org/freetype/freetype/-/merge_requests/5#note_829289 |
| |
| 2021-03-07 Tim-Philipp Müller <tim@centricular.com> |
| |
| [ci] Add basic support for Meson builds with MSVC on Windows. |
| |
| This adds meson jobs for VS2017 (x86 and x86_64). |
| |
| * .gitlab-ci.yml: New file. |
| |
| 2021-03-07 Tim-Philipp Müller <tim@centricular.com> |
| |
| [meson] Add subproject fallbacks for 'libpng' and 'zlib'. |
| |
| * subprojects/libpng.wrap, subprojects/zlib.wrap: New files. |
| |
| * meson.build: Updated. |
| |
| 2021-03-07 Xavier Claessens <xavier.claessens@collabora.com> |
| |
| [meson] Make it work with Windows. |
| |
| * meson.build: Do not process `ftconfig.h` when not using |
| `ftconfig.h.in`. |
| |
| Fixes #1029. |
| |
| 2021-02-25 Werner Lemberg <wl@gnu.org> |
| |
| [woff2] Fix memory leak. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=28148 |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Reject fonts that have |
| multiple tables with the same tag. While not explicitly forbidden |
| in the OpenType specification, it is implicitly forbidden by |
| describing a binary search algorithm for tables that only works |
| reliably if table tags are unique. |
| |
| 2021-02-22 Werner Lemberg <wl@gnu.org> |
| |
| * CMakeLists.txt: Update location of `LICENSE.TXT`. |
| |
| Fixes #1035. |
| |
| 2021-02-19 Werner Lemberg <wl@gnu.org> |
| |
| * builds/unix/ax_pthread.m4: Update from 'autoconf-archive'. |
| |
| A bunch of fixes were added recently to its git repository. |
| |
| 2021-02-17 Werner Lemberg <wl@gnu.org> |
| |
| [unix] Updates for autoconf 2.71. |
| |
| This fixes warnings reported by autoupdate. |
| |
| * builds/unix/ax_pthread.m4: Replace `as_echo` with `AS_ECHO`. |
| |
| * builds/unix/configure.raw: Remove obsolete `AC_HEADER_STDC`. |
| Don't escape back quotes in messages for `AC_MSG_WARN`. |
| |
| 2021-02-16 Werner Lemberg <wl@gnu.org> |
| |
| * builds/toplevel.mk: Fix previous commit. |
| |
| <top_level>: Use `TOP_DIR` in `wildcard` function. |
| (check_out_submodule, copy_submodule): Move down to come after |
| definition of `all` rule. |
| Call `mkdir` conditionally. |
| |
| 2021-02-16 Werner Lemberg <wl@gnu.org> |
| |
| * builds/toplevel.mk: Use rules for handling 'dlg'. |
| |
| Suggested by Alexei. |
| |
| (check_out_submodule, copy_submodule): New targets. |
| <top-level>: Replace calls to `shell` with rules. |
| |
| 2021-02-16 Werner Lemberg <wl@gnu.org> |
| |
| * builds/toplevel.mk: Avoid side effects of `shell`. |
| |
| We use a dummy variable to catch its output. Otherwise the `make` |
| program is going to interpret the return value of `shell`; this can |
| cause obscure warning or error messages or even be harmful. |
| |
| 2021-02-16 Werner Lemberg <wl@gnu.org> |
| |
| Move 'dlg' submodule to `subprojects` directory. |
| |
| This is for future changes with Meson, which doesn't allow a |
| different name for its `subprojects` directory. Having both a |
| `submodules` and a `subprojects` directory is confusing. |
| |
| * .gitmodules, autogen.sh (copy_submodule_files, DLG_INC_DIR, |
| DLG_SRC_DIR): Updated. |
| |
| * builds/toplevel.mk (<top-level>, do-dist), |
| builds/windows/vc2010/script.bat: Updated. |
| |
| * src/tools/no-copyright: Updated. |
| |
| 2021-02-16 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Update paint format values to support non-variable paints. |
| |
| * freetype.h (FT_PaintFormat): Update paint format identifiers after |
| a specification change. The specification was updated to have |
| sibling formats, variable and non-variable variants for each. |
| Reflect that here. |
| |
| * sfnt/ttcolr.c (read_paint): Remove parsing of variable indices as |
| the non-variable formats no longer have them. |
| |
| 2021-02-15 Daniel E <daniel.engberg.lists@pyret.net> |
| |
| * CMakeLists.txt: Improve 'bz2' support. |
| |
| Not all distributions such as FreeBSD provide a `.pc` file for |
| '(lib)bz2' so follow autotools and add it to `Libs.private` instead. |
| |
| 2021-02-13 Werner Lemberg <wl@gnu.org> |
| |
| * src/tools/update-copyright-year: Fix single-year entry handling. |
| |
| The fix from 2021-01-17 didn't cover the case where the year to be |
| updated is identical to the current year. |
| |
| 2021-02-13 Werner Lemberg <wl@gnu.org> |
| |
| Add new function `FT_Get_Transform`. |
| |
| See |
| |
| https://github.com/harfbuzz/harfbuzz/issues/2428 |
| |
| for some reasons to introduce this function. |
| |
| * include/freetype/freetype.h, src/base/ftobjs.c (FT_Get_Transform): |
| Implement it. |
| |
| 2021-02-12 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| Decorate `qsort` callbacks with `cdecl`. |
| |
| * include/freetype/internal/compiler-macros.h (FT_COMPARE_DEF): |
| Add new macro. |
| |
| * src/base/ftrfork.c, src/bdf/bdflib.c, src/gxvalid/gxvcommn.c, |
| src/psaux/afmparse.c, src/psnames/psmodule.c, src/type1/t1afm.c, |
| src/sfnt/sfwoff.c, src/sfnt/sfwoff2.c: Update `qsort` callbacks. |
| |
| Fixes #1026 when compiling FreeType with an unusual calling |
| convention while the C library function `qsort` still expects |
| `cdecl`. |
| |
| 2021-02-10 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Implement 'COLR' v1 sweep gradients. |
| |
| * freetype.h (FT_PaintSweepGradient): Add `FT_PaintSweepGradient` to |
| represent a 'COLR' v1 sweep gradient. |
| Update format. |
| (FT_PaintFormat): Update shifted paint formats. |
| Sync with spec. |
| * sfnt/ttcolr.c (read_paint): Logic to parse sweep gradients. |
| Fix struct access in radial gradient implementation. |
| |
| 2021-02-09 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Provide optional root transform for 'COLR' v1 glyph graph. |
| |
| * include/freetype/freetype.h (FT_Get_Color_Glyph_Paint): |
| Additional function argument `root_transform` to control whether |
| root transform should be returned. |
| (FT_OpaquePaint): Additional tracking field to denote whether |
| root transform is to be returned. |
| * include/freetype/internal/sfnt.h |
| (TT_Get_Color_Glyph_Paint_Func): Propagate additional argument. |
| * src/base/ftobjs.c (FT_Get_Color_Glyph_Paint): Ditto. |
| * src/sfnt/ttcolr.c (tt_face_get_colr_glyph_paint): Return root |
| transform reflecting the size and tranform configured on |
| `FT_Face`. |
| (read_paint): Initialize and track status of insert_root_transform |
| flag. |
| |
| 2021-02-09 Xavier Claessens <xavier.claessens@collabora.com> |
| |
| * meson.build: s/freetype2_dep/freetype_dep/. |
| |
| Many projects (e.g., fontconfig, cairo) hardcode the `freetype_dep` |
| variable name to use FreeType as subproject because that was the |
| variable name in Centricular's Meson port of FreeType. While they |
| should stop hardcoding that variable name, it does not cost us |
| anything to keep using that name to ease transition. |
| |
| 2021-02-09 Xavier Claessens <xavier.claessens@collabora.com> |
| |
| [meson] Fix handling of HarfBuzz library. |
| |
| * meson.build (harfbuzz_dep): Do not fall back to HarfBuzz by |
| default. |
| |
| Otherwise it causes a dependency cycle: |
| |
| cairo => fontconfig => freetype2 => harfbuzz => cairo |
| |
| Meson will still fall back to HarfBuzz subprojects if the `harfbuzz` |
| option is set to `enabled` instead of `auto` and a |
| `subprojects/harfbuzz.wrap` file is present. In that case it is the |
| responsibility of the main project to set the proper options on each |
| subproject to break the dependency cycle. |
| |
| Fixes: #1028. |
| |
| 2021-02-09 Xavier Claessens <xavier.claessens@collabora.com> |
| |
| [meson] Fix dependency lookup and generate `ftconfig.h`. |
| |
| - zlib: If not found on the system, meson can build it as a |
| subproject. We thus never use the (outdated) zlib support that |
| comes with FreeType. Doing so has the additional advantage that |
| the zlib code can be shared with other projects like GLib if both |
| are subprojects of an application. |
| - harfbuzz: Build as a subproject if not found on the system. |
| - 'QUESTION: What if the compiler doesn't support `-D` but uses `/D` |
| instead as on Windows?' Answer: Meson translate arguments for us. |
| - visibility: Replace self-made code with meson-specific solution. |
| |
| * meson.build (ft2_defines): Rewrite logic to set and handle it. |
| (process_header_command): New variable, previously called |
| `ftoption_command`. |
| (ftoption_command, ftconfig_command): New variables. |
| (zlib_option): Removed. |
| (zlib_dep): New variable. |
| (ft2_deps): Updated. |
| (harfbuzz_dep): Updated. |
| (ftconfig_h_in, ftconfig_h): New variables. |
| (ft2_sources): Updated. |
| (ft2_lib): Updated, handle visibility. |
| (summary): Updted. |
| |
| * meson_options.txt (zlib): Updated. |
| |
| 2021-02-09 Xavier Claessens <xavier.claessens@collabora.com> |
| |
| * meson.build: Fix resource compilation on Windows. |
| |
| This is copied from GStreamer's meson port of FreeType. |
| |
| (ft2_sources): Add both debug and resource file (the latter for |
| Windows only). |
| (ft2_debug_src): Removed. |
| |
| 2021-02-09 Xavier Claessens <xavier.claessens@collabora.com> |
| |
| * meson.build: s/ft2_libtool_version/ft2_pkgconfig_version/. |
| |
| (freetype2_dep): Use it. |
| |
| `ft2_libtool_version` would be the shared library version, not the |
| one we should use in file `freetype2.pc`. |
| |
| 2021-02-09 Xavier Claessens <xavier.claessens@collabora.com> |
| |
| * meson.build: Use `meson.override_dependency`. |
| |
| This is a new meson mechanism to avoid other projects to hard-code |
| the `freetype2_dep` variable name in their build definition. It |
| also ensures that meson does not mix system and subproject versions |
| of FreeType inside of the same project. |
| |
| Also remove outdated TODO because `declare_dependency` was already |
| there. |
| |
| 2021-02-09 Xavier Claessens <xavier.claessens@collabora.com> |
| |
| * meson.build (bzip2_dep): Simplify. |
| |
| We remove `static:false` from `find_library('bz2')`. |
| |
| I don't know whether the previous code was a workaround for an old |
| meson bug, but at least with version >=0.55.0 (which FreeType uses) |
| it picks the shared library when both are available. |
| |
| File `freetype2.pc` still contains the full path to file `libbz2.so` |
| instead of `-lbz2` – that we need to do this is a meson bug even |
| present in the current version (0.57.0). |
| |
| 2021-02-09 Xavier Claessens <xavier.claessens@collabora.com> |
| |
| * meson.build: Set project version. |
| |
| 2021-02-04 Werner Lemberg <wl@gnu.org> |
| |
| [base] Fix Netpbm tracing message. |
| |
| * src/base/ftobjs.c (FT_Render_Glyph_Internal): Don't emit Netpbm |
| warning if there is nothing to output. |
| |
| 2021-02-04 Werner Lemberg <wl@gnu.org> |
| |
| * src/*: Don't use more than one '\n' in `FT_TRACE` and `FT_ERROR`. |
| |
| This ensures good logging output, with all lines having a proper |
| prefix (if requested). |
| |
| This is a continuation of a similar patch from 2020-12-02, which |
| missed some locations. |
| |
| 2021-02-03 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * builds/unix/configure.raw [mmap]: Restore default path. |
| |
| Fixes #1023. |
| |
| 2021-02-03 Werner Lemberg <wl@gnu.org> |
| |
| [psaux] Fix integer overflow. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=30154 |
| |
| * src/psaux/psblues.c (cf2_blues_capture): Use `SUB_INT32`. |
| |
| 2021-02-02 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * builds/unix/configure.raw [mmap support]: Explicitly handle Windows. |
| |
| Fixes #1024. |
| |
| 2021-01-31 Werner Lemberg <wl@gnu.org> |
| |
| * builds/unix/configure.raw [mmap support]: Correctly handle Windows. |
| |
| Fixes #1024. |
| |
| 2021-01-31 Werner Lemberg <wl@gnu.org> |
| |
| * builds/windows/ftdebug.c: Synchronize with `src/base/ftdebug.c`. |
| |
| 2021-01-31 Werner Lemberg <wl@gnu.org> |
| |
| Always provide logging API. |
| |
| It's easier to have stubs if FT_DEBUG_LOGGING is undefined than to |
| modify `ftexport.sym` conditionally. |
| |
| Problem reported by Alexei. |
| |
| * src/base/ftdebug.c: Include `ftlogging.h`. |
| (FT_Trace_Set_Level, FT_Trace_Set_Default_Level, FT_Set_Log_Handler, |
| FT_Set_Default_Log_Handler) [!FT_DEBUG_LOGGING]: Provide stubs. |
| |
| 2021-01-31 Werner Lemberg <wl@gnu.org> |
| |
| * builds/unix/configure.raw: Fix typo. |
| |
| Bug introduced in Vincent's last commit bb33f03. |
| |
| Fixes issue #1021. |
| |
| 2021-01-27 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/base/ftstroke.c (FT_Stroker_EndSubPath): Ignore tiny gaps. |
| |
| Fixes bug #1020. |
| |
| 2021-01-27 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [stroker] Minor clean-up. |
| |
| * src/base/ftstroke.c (FT_Stroker_{ConicTo,CubicTo}): Reset the last |
| line length. |
| (FT_Stroker_EndSubPath): Call `ft_stroker_process_corner'. |
| |
| 2021-01-27 Vincent Torri <vincent.torri@gmail.com> |
| |
| * builds/windows/ftsystem.c: Add shared memory support on Windows. |
| |
| * CMakeLists.txt (BASE_SRCS), builds/unix/configure.raw (FTSYS_SRC), |
| builds/windows/vc2010/freetype.vcxproj, |
| builds/windows/visualc/freetype.vcproj, meson.build (ft2_sources): |
| Add it (conditionally). |
| |
| 2021-01-23 Werner Lemberg <wl@gnu.org> |
| |
| Require HarfBuzz 2.0.0. |
| |
| This is needed to make commit f1f9705f9 work. |
| |
| * CMakeLists.txt (HARFBUZZ_MIN_VERSION), builds/unix/configure.raw |
| (harfbuzz_pkg), meson.build (harfbuzz_dep): Updated. |
| |
| 2021-01-22 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * autogen.sh: Absorb `version.sed'. |
| * version.sed: Removed. |
| |
| 2021-01-19 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * srd/base/ftlcdfil.c (FT_Library_SetLcdGeometry): Fix return value. |
| |
| 2021-01-15 Nikolaus Waxweiler <madigens@gmail.com> |
| |
| [afshaper] Fix hb_ot_tags_from_script deprecation warning. |
| |
| * autofit/afshaper.c (af_shaper_get_coverage): Copy the source code |
| of the function as suggested in |
| https://github.com/harfbuzz/harfbuzz/issues/2737 and adjust to handle |
| at most three tags. |
| |
| 2021-01-17 Werner Lemberg <wl@gnu.org> |
| |
| * src/tools/update-copyright-year: Fix single-year entry handling. |
| |
| 2021-01-16 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * builds/unix/unixddef.mk: Remove the second DEVEL_DIR definition. |
| |
| 2021-01-14 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Additional checks for 'colr' table presence. |
| |
| * sfnt/ttcolr.c (tt_face_get_colr_glyph_paint, |
| tt_face_get_colorline_stops, tt_face_get_paint): Additional checks |
| for whether colr table is present. Prevents crashes when these |
| methods are called on non-COLR fonts. |
| |
| 2021-01-13 Dominik Röttsches <drott@chromium.org> |
| |
| Add config option to test for 'COLR' v1 support in headers. |
| |
| * include/freetype/config/ftoption.h (TT_SUPPORT_COLRV1): New macro |
| so that clients can test whether the FreeType checkout that they are |
| building against supports the 'COLR' v1 API. This is intended to be |
| a temporary solution until 'COLR' v1 support is released in a |
| FreeType version and such a check can be made by using the version |
| number instead. |
| |
| 2020-12-16 Dominik Röttsches <drott@chromium.org> |
| |
| [base] Fill 'COLR' v1 API templates to make them work (#59703). |
| |
| * src/base/ftobjs.c (FT_Get_Color_Glyph_Paint, FT_Get_Paint_Layers, |
| FT_Get_Paint, FT_Get_Colorline_Stops): Add basic sanity checks, |
| check for existence of `FT_Face`, check arguments and delegate calls |
| for the respective 'COLR' v1 API to the SFNT driver. |
| |
| 2020-12-16 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Register 'COLR' v1 API in driver (#59703). |
| |
| * include/freetype/internal/sfnt.h (TT_Get_Color_Glyph_Paint_Func, |
| TT_Get_Paint_Layers_Func, TT_Get_Colorline_Stops_Func, |
| TT_Get_Paint_Func): New function pointer types. |
| (SFNT_Interface): Add them. |
| (FT_DEFINE_SFNT_INTERFACE): Updated. |
| |
| * src/sfnt/sfdriver.c (PUT_COLOR_LAYERS_V1): New macro. |
| (sfnt_interface): Add new function pointers. |
| |
| 2020-12-16 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Add 'COLR' v1 API to retrieve color layers (#59703). |
| |
| * src/sfnt/ttcolr.c (tt_face_get_paint_layers): New function to get |
| the layers of a `PaintColrLayers` table in the font, using an |
| `FT_LayerIterator` from an `FT_PaintColrLayers` object retrieved via |
| `tt_face_get_paint`. |
| |
| * src/sfnt/ttcolr.h: Updated. |
| |
| 2020-12-16 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Add 'COLR' v1 API to iterate color stops (#59703). |
| |
| * src/sfnt/ttcolr.c (tt_face_get_colorline_stops): New function to |
| return the current `FT_ColorStop` object from `FT_ColorStopIterator`. |
| Also increment the iterator. |
| |
| * src/sfnt/ttcolr.h: Updated. |
| |
| 2020-12-16 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Add API to get actual paint from `FT_OpaquePaint` (#59703). |
| |
| * src/sfnt/ttcolr.c (tt_face_get_paint): New function to resolve an |
| `FT_OpaquePaint` paint reference into an `FT_COLR_Paint` object of a |
| certain format, which contains the detailed information stored in a |
| paint of the respective format. |
| (read_paint): New function to provide the format specific parsing |
| and to populate the data members of each specific `FT_COLR_Paint` |
| subtype. |
| (read_color_line): New function to parse retrieved color line |
| information into an `FT_ColorLine` object, which has information |
| about the color line extend mode as well as an |
| `FT_ColorStopIterator` object. |
| |
| * src/sfnt/ttcolr.h: Updated. |
| |
| 2020-12-16 Dominik Röttsches <drott@chromium.org> |
| |
| [sfnt] Add API to retrieve 'COLR' v1 root paint (#59703). |
| |
| * src/sfnt/ttcolr.c (BaseGlyphV1Record): New structure. |
| (tt_face_load_colr): Handle version 1 table header. |
| (find_base_glyph_v1_record): New auxiliary function. |
| (tt_face_get_colr_glyph_paint): New function to find the root |
| `FT_OpaquePaint` object for a given glyph ID. |
| |
| * src/sfnt/ttcolr.h: Updated. |
| |
| 2020-12-16 Dominik Röttsches <drott@chromium.org> |
| |
| Add new methods required for 'COLR' v1 to public API (#59703). |
| |
| * include/freetype/freetype.h (FT_Get_Color_Glyph_Paint): New method |
| for retrieving the root paint object for a color glyph by specifying |
| a glyph ID. |
| (FT_Get_Paint_Layers): New method for retrieving the layers of a |
| `PaintColorGlyph`. |
| (FT_Get_ColorLine_Stops): New method for retrieving the stops of a |
| color. |
| (FT_Get_Paint): New method for resolving an `FT_OpaquePaint` into an |
| `FT_COLR_Paint` object. |
| |
| 2020-12-16 Dominik Röttsches <drott@chromium.org> |
| |
| Add types required for 'COLR' v1 to public API (#59703). |
| |
| * include/freetype/freetype.h (FT_PaintFormat, FT_ColorStopIterator, |
| FT_ColorIndex, FT_ColorStop, FT_PaintExtend, FT_ColorLine, |
| FT_Affine23, FT_CompositeMode, FT_OpaquePaint, FT_PaintColrLayers, |
| FT_PaintSolid, FT_PaintLinearGradient, FT_PaintRadialGradient, |
| FT_PaintGlyph, FT_PaintColrGlyph, FT_PaintTransformed, |
| FT_PaintTranslate, FT_PaintRotate, FT_PaintSkew, FT_PaintComposite, |
| FT_COLR_Paint): Adding structs and enum to represent paint format, |
| color stop information, gradient extend information, structs to |
| reference paint offsets, and to define transforms and compositions. |
| Adding a union type to represent the union of the structs, |
| distinguished by `FT_PaintFormat`. |
| |
| 2021-01-10 Werner Lemberg <wl@gnu.org> |
| |
| * builds/*: s/BUILD_DIR/PLATFORM_DIR/. |
| |
| The old variable name caused confusion. |
| |
| 2021-01-08 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [builds] Revert `FTMODULE_H' changes. |
| |
| * builds/toplevel.mk, builds/freetype.mk: Revert changes. |
| |
| 2021-01-07 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [builds/windows] Fix up DLG build with VC++. |
| |
| * builds/windows/vc2010/script.bat: Copy headers to include/. |
| * builds/windows/vc2010/freetype.vcxproj: Remove DLG paths. |
| |
| 2021-01-07 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [builds] Relocate `FTMODULE_H'. |
| |
| * builds/toplevel.mk: Place `FTMODULE_H' in include/. |
| * builds/freetype.mk: Simplify included path. |
| |
| 2021-01-07 Werner Lemberg <wl@gnu.org> |
| |
| Fix ABI incompatibility. |
| |
| * include/freetype/ftimage.h (FT_Pixel_Mode): Don't insert |
| `FT_PIXEL_MODE_GRAY16' but append it. |
| |
| * src/base/ftobjs.c (pixel_modes): Updated. |
| |
| 2021-01-07 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [dlg] Move the headers to include/dlg to simplify their use. |
| |
| * autogen.sh, builds/toplevel.mk: Copy headers to include/dlg. |
| * builds/freetype.mk, builds/windows/vc2010/freetype.vcxproj: |
| Simplify included path. |
| * include/freetype/internal/ftdebug.h: Simplify #include. |
| * src/dlg/rules.mk, .gitignore: Updated. |
| |
| 2021-01-06 Werner Lemberg <wl@gnu.org> |
| |
| * meson.build: Add summary. |
| |
| Based on a patch from Vincent Torri <vincent.torri@gmail.com>. |
| |
| 2021-01-06 Torsten Hilbrich <emacs.nolkaf@hilbrich.tk> |
| |
| * meson.build: Fix 'png' build option (#59458). |
| |
| Without this patch, 'png' is always required. |
| |
| 2021-01-04 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [builds/windows] Add SDF to VC2010 project. |
| |
| * builds/windows/vc2010/freetype.vcxproj: Updated; |
| AfterBuild conveniences. |
| |
| 2020-12-26 Werner Lemberg <wl@gnu.org> |
| |
| [sdf] Use 'counter-clockwise', not 'anti-clockwise'. |
| |
| We prefer US nomenclature. |
| |
| * src/sdf/ftsdf.c (SDF_Contour_Orientation): |
| s/SDF_ORIENTATION-ACW/SDF_ORIENTATION_CCW/. |
| Update all users. |
| |
| 2020-12-26 Werner Lemberg <wl@gnu.org> |
| |
| * src/base/ftobjs.c (pixel_modes): Updated. |
| |
| 2020-12-26 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Remove custom memory tracker. |
| |
| The internal FreeType memory tracker is sufficient. |
| |
| * src/sdf/ftsdf.c (FT_DEBUG_INNER, FT_ASSIGNP_INNER, SDF_MemoryUser, |
| sdf_alloc, sdf_free, SDF_ALLOC, SDF_FREE, |
| SDF_MEMORY_TRACKER_DECLARE, SDF_MEMORY_TRACKER_SETUP, |
| SDF_MEMORY_TRACKER_DONE): Removed. |
| |
| s/SDF_ALLOC/FT_ALLOC/. |
| s/SDF_FREE/FT_FREE/. |
| |
| Other updates. |
| |
| 2020-12-24 Werner Lemberg <wl@gnu.org> |
| |
| [sdf] Fix `make multi`. |
| |
| * src/sdf/ftsdf.c: Include `ftoutln.h`. |
| |
| 2020-12-24 Werner Lemberg <wl@gnu.org> |
| |
| [sdf] Fix tracing. |
| |
| * include/freetype/internal.fttrace.h: Add 'bsdf' component. |
| |
| * src/sdf/ftbsdf.c, src/sdf/ftsdf.c (FT_COMPONENT): Define. |
| |
| 2020-08-21 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add debugging function. |
| |
| * src/sdf/ftsdf.c (sdf_shape_dump): New function. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add 'bsdf' renderer to 'sdf' module. |
| |
| * src/sdf/ftsdfrend.c (ft_bsdf_render): New function. |
| |
| (ft_bitmap_sdf_renderer_class): New structure. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add interface functions for the 'bsdf' rasterizer. |
| |
| * src/sdf/ftsdf.c (bsdf_raster_new, bsdf_raster_reset, |
| bsdf_raster_set_mode, bsdf_raster_render, bsdf_raster_done): New |
| functions. |
| |
| (ft_bitmap_sdf_raster): New variable. |
| |
| * src/sdf/ftsdf.h: Updated. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add function to copy SDF data into output bitmap. |
| |
| * src/sdf/ftbsdf.c (finalize_sdf): New function. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add '8-point sequential Euclidean distance mapping' algorithm. |
| |
| * src/sdf/ftbsdf.c (compare_neighbor, first_pass, second_pass, |
| edt8): New functions. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add function to copy source bitmap to distance map. |
| |
| * src/sdf/ftbsdf.c (bsdf_init_distance_map): New function. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add functions to compute pixel edge distances. |
| |
| * src/sdf/ftbsdf.c (compute_edge_distance, bsdf_approximate_edge): |
| New functions. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add function to find edge pixels in a grid of alpha values. |
| |
| * src/sdf/ftbsdf.c (bsdf_is_edge): New function. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add essential structures for the 'bsdf' rasterizer. |
| |
| * src/sdf/ftbsdf.c (ONE): New macro. |
| (BSDF_TRaster, ED, BSDF_Worker): New structures. |
| (zero_ed): New constant. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add 'sdf' module to non-gnumake build systems. |
| |
| * include/freetype/config/ftmodule.h: Add both the 'sdf' and 'bsdf' |
| renderers to the list of modules. |
| |
| * CMakeLists.txt (BASE_SRCS): Add 'sdf' single-object module. |
| |
| 2020-08-20 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Added basic overlapping contour support. |
| |
| * src/sdf/ftsdf.c (sdf_generate_with_overlaps): New function. |
| (sdf_raster_render): Enable it. |
| |
| 2020-08-19 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add build infrastructure. |
| |
| * src/sdf/module.mk, src/sdf/rules.mk: New files. |
| |
| * src/sdf/ftsdf.h (ft_sdf_raster): New forward declaration. |
| |
| * include/freetype/ftmoderr.h (FT_MODERRDEF): Add error definition |
| for the 'sdf' module. |
| |
| * include/freetype/internal/fttrace.h (FT_TRACE_DEF): Add trace |
| definition for the `sdf' module. |
| |
| * modules.cfg (RASTER_MODULES): Add the `sdf' module to the list of |
| rasterizers. |
| |
| 2020-08-19 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add interface functions for the 'sdf' rasterizer. |
| |
| * src/sdf/ftsdf.c (sdf_raster_new, sdf_raster_reset, |
| sdf_raster_set_mode, sdf_raster_render, sdf_raster_done): New |
| functions. |
| (ft_sdf_raster): New structure. |
| |
| 2020-08-19 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add subdivision and bounding box optimization. |
| |
| * src/sdf/ftsdf.c (sdf_generate_bounding_box): New function, which |
| is an optimized version of `sdf_generate`. |
| (sdf_generate_subdivision): New function. |
| |
| 2020-08-19 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add function to generate SDF. |
| |
| * src/sdf/ftsdf.c (sdf_generate): New function, currently disabled. |
| This is a proof-of-concept implementation: It doesn't use any |
| optimization, it simply checks all grid points against all contours. |
| |
| 2020-08-19 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add functions to get shortest distance from any edge/contour. |
| |
| * src/sdf/ftsdf.c (sdf_edge_get_min_distance): New function. |
| (sdf_contour_get_min_distance): New function, currently disabled. |
| |
| 2020-08-18 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add shortest distance finding functions. |
| |
| * src/sdf/ftsdf.c (get_min_distance_line, get_min_distance_conic, |
| get_min_distance_cubic): New functions. Note that |
| `get_min_distance_conic` comes with two implementations (using an |
| analytical and an iterative method, to be controlled with the |
| `USE_NEWTON_FOR_CONIC` macro). |
| |
| 2020-08-18 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add function to resolve corner distances. |
| |
| * src/sdf/ftsdf.c (resolve_corner): New function. |
| |
| 2020-08-18 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add essential math functions. |
| |
| * src/sdf/ftsdf.c (cube_root, arc_cos) [!USE_NEWTON_FOR_CONIC]: New |
| auxiliary functions. |
| |
| * src/sdf/ftsdf.c (solve_quadratic_equation, solve_cubic_equation) |
| [!USE_NEWTON_FOR_CONIC]: New functions. |
| |
| 2020-08-18 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add utility functions for contours. |
| |
| * src/sdf/ftsdf.c (get_control_box, get_contour_orientation): New |
| functions. |
| (split_conic, split_cubic, split_sdf_conic, split_sdf_cubic, |
| split_sdf_shape): New functions. |
| |
| 2020-08-17 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add functions to decompose `FT_Outline`. |
| |
| * src/sdf/ftsdf.c (sdf_move_to, sdf_line_to, sdf_conic_to, |
| sdf_cubic_to): New auxiliary decomposition functions. |
| (sdf_compose_funcs): New structure. |
| (sdf_outline_decompose): New function. |
| |
| 2020-08-17 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Structs, enums, macros, and functions for 'sdf' rasterizer. |
| |
| * src/sdf/ftsdf.c (FT_DEBUG_INNER, FT_ASSIGNP_INNER) |
| [FT_DEBUG_LEVEL_TRACE && FT_DEBUG_MEMORY]: New macros. |
| (SDF_MemoryUser) [FT_DEBUG_LEVEL_TRACE && FT_DEBUG_MEMORY]: New |
| struct for memory usage tracing. |
| (sdf_alloc, sdf_free) [FT_DEBUG_LEVEL_TRACE && FT_DEBUG_MEMORY]: New |
| functions for memory usage tracing. |
| |
| (SDF_ALLOC, SDF_FREE): New macros for memory management. |
| (SDF_MEMORY_TRACKER_DECLARE, SDF_MEMORY_TRACKER_SETUP, |
| SDF_MEMORY_TRACKER_DONE): New macros to set up memory usage tracing. |
| |
| (USE_NEWTON_FOR_CONIC, MAX_NEWTON_DIVISIONS, MAX_NEWTON_STEPS, |
| CORNER_CHECK_EPSILON, CG_DIMEN): New configuration macros for |
| controlling the process of finding the shortest distance. |
| |
| (MUL_26D6, VEC_26D6_DOT): New auxiliary macros. |
| |
| (SDF_TRaster, SDF_Edge, SDF_Contour, SDF_Shape, SDF_Signed_Distance, |
| SDF_Params): New structs for setting up SDF data. |
| (SDF_Edge_Type, SDF_Contour_Orientation): New enums for SDF data. |
| |
| (zero_vector, null_edge, null_contour, null_shape, max_sdf): Useful |
| constants. |
| |
| (sdf_edge_new, sdf_edge_done, sdf_contour_new, sdf_contour_done, |
| sdf_shape_new, sdf_shape_done): New constructors and destructors. |
| |
| 2020-08-17 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add raster parameters structure. |
| |
| * src/sdf/ftsdf.h (SDF_Raster_Params): New structure. |
| |
| * src/sdf/sdf.c: Include source files in order to make a single |
| object of the module. |
| |
| 2020-08-17 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add 'sdf' renderer. |
| |
| * src/sdf/ftsdf.c: Add 'sdf' renderer along with its interface |
| functions. |
| Also add functions to set and get properties. |
| |
| 2020-08-17 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add common elements for 'sdf' and 'bsdf' renderers. |
| |
| * src/sdf/ftsdfrend.h (SDF_Rendere_Module, ft_sdf_renderer_class, |
| ft_bitmap_sdf_renderer_class): New structures. |
| |
| * src/sdf/ftsdfcommon.h (DEFAULT_SPREAD, MIN_SPREAD_MAX_SPREAD, |
| USE_SQUARED_DISTANCES): New macros. |
| (FT_INT_26D6, FT_INT_16D16, FT_26D6_16D16): New macros. |
| (FT_CALL, VECTOR_LENGTH_16D16): New macros. |
| (FT_26D6_Vec, FT_16D16_Vec, FT_16D16, FT_26D6, FT_6D10, FT_CBox): |
| New typedefs. |
| (square_root): New macro. |
| |
| * src/sdf/ftsdferrs.h: Add module error setup. |
| |
| 2020-08-16 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [sdf] Add files for new 'sdf' module. |
| |
| Here is a breakdown of what the files will contain. |
| |
| * src/sdf/ftsdfrend.c, src/sdf/ftsdfrend.h: The 'sdf' and 'bsdf' |
| renderers. |
| |
| * src/sdf/ftsdf.c, src/sdf/ftsdf.h: The rasterizer for the 'sdf' |
| renderer. |
| * src/sdf/ftbsdf.c, src/sdf/ftbsdf.h: The rasterizer for the 'bsdf' |
| renderer. |
| |
| * src/sdf/ftsdfcommon.h: Commmon properties and functions for both |
| rasterizers. |
| * src/sdf/ftsdferrs.h: Common error defines. |
| |
| * src/sdf/sdf.c: For building a single object of the entire module. |
| |
| 2020-08-16 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [base] Allow renderers of different formats. |
| |
| * src/base/ftobjs.c (FT_Render_Glyph_Internal): Do not return if the |
| glyph's slot format is `FT_GLYPH_FORMAT_BITMAP`. The forthcoming |
| 'bsdf' renderer will require bitmaps for processing. |
| |
| * src/base/ftobjs.c (ft_add_renderer, ft_remove_renderer): Remove |
| renderer's glyph format check before adding and removing them. The |
| 'bsdf' renderer will have a format `FT_GLYPH_FORMAT_BITMAP`. |
| |
| 2020-08-16 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| Add data types required for the forthcoming 'sdf' module. |
| |
| * include/freetype/freetype.h (FT_Render_Mode): Add new render mode |
| `FT_RENDER_MODE_SDF`, which will be used to generate SDF. |
| |
| * include/freetype/ftimage.h (FT_Pixel_Mode): Add new pixel mode |
| `FT_PIXEL_MODE_GRAY16`, which will be the output of the 'sdf' |
| module. |
| (FT_RASTER_FLAG_SDF): New raster flag to be used internally by the |
| 'sdf' module. |
| |
| * include/freetype/fttypes.h (FT_F6Dot10): New data type. |
| |
| 2020-08-16 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| [base] Allow renderers of different formats. |
| |
| * src/base/ftobjs.c (FT_Render_Glyph_Internal): Do not return if the |
| glyph's slot format is `FT_GLYPH_FORMAT_BITMAP`. The forthcoming |
| 'bsdf' renderer will require bitmaps for processing. |
| |
| * src/base/ftobjs.c (ft_add_renderer, ft_remove_renderer): Remove |
| renderer's glyph format check before adding and removing them. The |
| 'bsdf' renderer will have a format `FT_GLYPH_FORMAT_BITMAP`. |
| |
| 2020-12-23 Werner Lemberg <wl@gnu.org> |
| |
| * builds/windows/detect.mk (COPY): Make it work with `shell`. |
| |
| Without this patch, we get the error |
| |
| builds/toplevel.mk:127: *** missing separator. Stop. |
| |
| Reported by Anuj, with a solution from Alexei. |
| |
| 2020-12-23 Ignacio Casal Quinteiro <qignacio@amazon.com> |
| |
| * meson.build (ft2_defines): Fix builds on Windows. |
| |
| 2020-12-18 Tatsuyuki Ishi <ishitatsuyuki@gmail.com> |
| |
| [autofit] Fix double division in stem darkening. |
| |
| The old code used to divide the darkening amount by em_ratio twice, |
| leading to unnecessarily bold stems on certain fonts with higher |
| units per em (e.g. Inter). This patch fixes it. |
| |
| The return value of af_loader_compute_darkening was also changed to |
| use 16.16 fixed point to get rid of a redundant truncation operation. |
| This should slightly improve the precision, although it's still |
| bottlenecked by the emboldening function, which uses 26.6 fixed point. |
| |
| * src/autofit/afloader.[ch] |
| (af_loader_compute_darkening): Return FT_Fixed. |
| (af_loader_embolden_glyph_in_slot): Revise calculations. |
| |
| 2020-12-17 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * include/freetype/ftmodapi.h (FT_FACE_DRIVER_NAME): New public macro. |
| |
| The driver name is needed for `FT_Property_Set' and `FT_Property_Get'. |
| |
| 2020-12-16 Chris Liddell <chris.liddell@artifex.com> |
| |
| [truetype] Fix incremental metrics (#59503). |
| |
| * src/truetype/ttgload.c (tt_get_metrics, load_truetype_glyph): |
| Previously, the code would populate the phantom points before |
| calling the `get_glyph_metrics` callback. For formats like PCL XL |
| format 1, class 2 downloaded fonts (where metrics are removed from |
| the TTF header), this causes problems when the hinting program uses |
| the phantom points (misplaced and distorted glyphs) due to the |
| metrics being unset (all zeros). |
| (tt_get_metrics_incr_overrides): Renamed to... |
| (tt_get_metrics_incremental): ... this. Updated caller |
| |
| * include/freetype/ftincrem.h: Update the documentation to make it |
| clearer that `get_glyph_metrics` is to retrieve metrics from a |
| non-standard source, but *not* for the purpose of imposing custom |
| metrics. |
| |
| 2020-12-14 Werner Lemberg <wl@gnu.org> |
| |
| [type42] Pacify static analysis tools (#59682). |
| |
| * src/type42/t42objs.c (T42_Size_Init, T42_GlyphSlot_Init): Avoid |
| warnings about uninitialized variables. |
| |
| 2020-12-07 Werner Lemberg <wl@gnu.org> |
| |
| * builds/unix/configure.raw: Don't set `FT_DEBUG_LOGGING`. |
| |
| All debug options are handled exclusively in `ftoption.h`. |
| |
| 2020-12-07 Werner Lemberg <wl@gnu.org> |
| |
| * src/*: More fixes for using a '\n' in `FT_TRACE` and `FT_ERROR`. |
| |
| 2020-12-07 Werner Lemberg <wl@gnu.org> |
| |
| */*: s/FT_LOGGING/FT_DEBUG_LOGGING/. |
| |
| 2020-12-05 Werner Lemberg <wl@gnu.org> |
| |
| * builds/toplevel.mk (do-dist): Remove `submodules` directory. |
| |
| 2020-12-02 Werner Lemberg <wl@gnu.org> |
| |
| * src/*: Don't use more than one '\n' in `FT_TRACE` and `FT_ERROR`. |
| |
| This ensures good logging output, with all lines having a proper |
| prefix (if requested). |
| |
| 2020-12-02 Werner Lemberg <wl@gnu.org> |
| |
| [base] Don't close 'stderr' after logging. |
| |
| * src/base/ftdebug.c, builds/windows/ftdebug.c (ft_logging_deinit): |
| Fix it. |
| |
| 2020-12-02 Werner Lemberg <wl@gnu.org> |
| |
| * submodules/dlg: Updated to commit 9f0c8b22. |
| |
| 2020-12-02 Werner Lemberg <wl@gnu.org> |
| |
| * src/bdf/bdflib.c: Fix `-Wformat` warning. |
| |
| 2020-12-02 Werner Lemberg <wl@gnu.org> |
| |
| Improve setup for 'dlg' library. |
| |
| * autogen.sh (copy_submodule_file), builds/toplevel.mk: Redirect |
| stderr to `/dev/null`. |
| |
| * builds/toplevel.mk: Move code block to handle 'dlg' stuff into |
| `check_platform` conditional. |
| Also fix wildcard expressions for guarding `git submodule` commands. |
| Also make file copying work with non-Unix platforms (untested). |
| |
| 2020-12-01 Werner Lemberg <wl@gnu.org> |
| |
| [build] Use gcc (and clang) in C99 mode. |
| |
| Other compilers are unchanged. |
| |
| * builds/compiler/gcc-dev.mk, builds/compiler/gcc.mk (ANSIFLAGS): |
| s/-ansi/-std=c99/. |
| |
| * builds/freetype.mk (FT_CFLAGS): Remove `-std=c99`. |
| |
| * builds/unix/configure.raw: Handle C99. |
| Remove no longer needed test for gcc 4.6 and earlier. |
| |
| 2020-12-01 Werner Lemberg <wl@gnu.org> |
| |
| [dlg] Fix compiler warnings. |
| |
| * src/dlg/dlgwrap.c: Duplicate some feature test macros from |
| `dlg.c`, which must come first before loading standard headers. For |
| example, `freetype.h` loads `stdio.h` if compiled in debug mode. |
| |
| 2020-12-01 Werner Lemberg <wl@gnu.org> |
| |
| * src/type42/t42parse.c: Fix `-Wformat` warnings. |
| |
| 2020-12-01 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| [builds/unix] Check for 'pthread' library. |
| |
| * builds/unix/ax_pthread.m4: New file, taken from 'autoconf-archive' |
| git repository. |
| |
| * builds/unix/configure.raw: Check for 'pthread'; also check whether |
| it works. |
| |
| 2020-12-01 Werner Lemberg <wl@gnu.org> |
| |
| [base] Implement vertical alignment of log printing. |
| |
| Based on a patch by Priyesh. |
| |
| * include/freetype/internal/fttrace.h (FT_MAX_TRACE_LEVEL_LENGTH): |
| New macro. |
| |
| * src/base/ftdebug.c, builds/windows/ftdebug.c (ft_log_handler): |
| Print logs after a fixed width to handle different lengths of |
| `FT_COMPONENT` entries. |
| Use `ft_strrchr` to check for final newline character. |
| |
| 2020-11-30 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| Update logging related documentation. |
| |
| * docs/DEBUG: Updates related to `FT_LOGGING`. |
| |
| * README.git: Updates related to logging. |
| |
| 2020-11-30 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| * src/*: Fix `-Wformat` warnings. |
| |
| 2020-11-30 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| [builds/windows] Changes to build 'dlg' with FreeType on Windows. |
| |
| We only support Visual C++ 2010 and newer. |
| |
| * builds/windows/vc2010/script.bat: New windows batch file to copy |
| necessary 'dlg' files from `submodules/dlg` to `src/dlg`. This file |
| is used as a pre-built event in Visual C++. |
| |
| * builds/windows/ftdebug.c: Synchronize with `src/base/ftdebug.c`. |
| |
| * builds/windows/vc2010/freetype.vcxproj.filters: Add |
| `src/dlgwrap.c`. |
| |
| * builds/windows/vc2010/freetype.vcxproj |
| (AdditionalIncludeDirectories): Add include files of dlg for 'Debug' |
| and 'Debug Static' configurations on both 'x64' and 'win32' |
| platforms. |
| (PreprocessorDefinitions): Add `FT_LOGGING` for 'Debug' and 'Debug |
| Static' configurations on both 'x64' and 'win32' platforms. |
| Add `DLG_STATIC' for 'Debug' configuration on 'x64' and 'win32' |
| platforms. |
| (DisableLanguageExtensions): We need to disable the `/Za` option |
| when building 'dlg' with FreeType as 'dlg' strictly follows the C99 |
| standard. Visual C++ produces behaves unexpectedly when |
| compiling a C99 file with `/Za` option enabled. |
| |
| 2020-11-30 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| [base] Add public API to change log handling function. |
| |
| * include/freetype/ftlogging.h (FT_Custom_Log_Handler): New function |
| typedef to store the custom callback logging function. |
| (FT_Set_Log_Handler, FT_Set_Default_Log_Handler): New functions to |
| set and reset custom log handler. |
| |
| * include/freetype/internal/ftdebug.h (custom_output_handler): New |
| variable to support a custom callback logging function. |
| (FT_Logging_Callback): A new function typedef to print log using |
| custom callback logging function, which is set using |
| `FT_Set_Log_Handler`. |
| (FT_Log): Use it. |
| |
| * src/base/ftdebug.c (FT_Set_Log_Handler, |
| FT_Set_Default_Log_Handler, FT_Logging_Callback): Add function |
| definitions. |
| |
| 2020-11-28 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| [base] Add public API to change the levels of tracing components. |
| |
| * include/freetype/ftlogging.h: New header file. |
| |
| * include/freetype/internal/ftdebug.h [FT_LOGGING]: Include |
| `ftlogging.h`. |
| |
| * src/base/ftdebug.c (ft_custom_trace_level): New variable. |
| (ft_debug_init): Update to support change of levels of tracing |
| components of FreeType at run-time. |
| (FT_Trace_Set_Level): New function to change the levels of tracing |
| components at run-time. |
| (FT_Trace_Set_Default_Level): New function to reset the levels of |
| tracing components back to default. |
| |
| 2020-11-28 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| [base] Updates to print timestamp and name of `FT_COMPONENT` in logs. |
| |
| * include/freetype/internal/ftdebug.h (FT_LOGGING_TAG, |
| FT_LOGGING_TAG_): New macros to resolve the value of `FT_COMPONENT' |
| into a string. |
| (ft_add_tag, ft_remove_tag): New functions to add and remove dlg tags. |
| |
| * src/base/ftdebug.c: Add new variables to control the logging of |
| timestamp and name of `FT_COMPONENT` along with actual logs. |
| (ft_add_tag, ft_remove_tag): Add function definitions. |
| (ft_log_handler): Updates to print timestamp and name of |
| `FT_COMPONENT`. |
| (ft_debug_init) [FT_LOGGING]: Users can now control the logging of |
| timestamp and name of `FT_COMPONENT` by adding tags in the |
| `FT2_DEBUG` environment variable. |
| |
| 2020-11-27 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| [base] Add functions and variables to print logs to a file. |
| |
| * include/freetype/internal/ftdebug.h: Added dlg's header files. |
| (FT_LOG): New macro to redirect trace logs to dlg's API's whenever |
| `FT_LOGGING' is defined. |
| (ft_logging_init, ft_logging_deinit): New functions to handle |
| initialization and uninitialization of logging related variables. |
| (ft_log_handler): New function to handle logs of FreeType. |
| |
| * src/base/ftdebug.c: Add necessary logging related variables. |
| (ft_logging_init, ft_logging_deinit, ft_log_handler): Add function |
| definitions. |
| |
| * src/base/ftinit.c (FT_Init_FreeType) [FT_LOGGING]: Call |
| `ft_logging_init`. |
| (FT_Done_FreeType) [FT_LOGGING]: Call `ft_logging_deinit`. |
| |
| * src/base/ftobjs.c (FT_New_Library): Call `ft_debug_init` only if |
| `FT_LOGGING` is not defined. |
| |
| 2020-11-27 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| [builds] Necessary changes to make 'dlg' compile. |
| |
| * autogen.sh (copy_submodule_files): New script to copy all the |
| necessary source and include files from `submodules/dlg` to |
| `src/dlg`. |
| |
| * src/dlg/dlgwrap.c: New wrapper file for `src/dlg.c`. It enables |
| the build of 'dlg' if the `FT_LOGGING` macro is defined. |
| |
| * src/dlg/rules.mk: New sub-Makefile. |
| |
| * builds/freetype.mk (DLG_DIR): New variable to include the |
| header files of the 'dlg' library. |
| (INCLUDES): Add `DLG_DIR`. |
| (FT_CFLAGS): Add `-std=c99' flag. |
| Include `src/dlg/rules.mk` file to build 'dlg' library. |
| (OBJ_S, OBJ_M): Add `DLG_OBJS_M` and `DLG_OBJS_S`. |
| |
| * builds/toplevel.mk: For builds directly from the git repository |
| we need to copy files from `submodule/dlg` to `src/dlg`. |
| |
| * include/freetype/config/ftoption.h, devel/ftoption.h (FT_LOGGING): |
| New macro to enable or disable the logging facility in FreeType. |
| |
| 2020-11-27 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| * .gitmodules: Add 'dlg' library's git repository as submodule. |
| |
| 2020-12-01 Werner Lemberg <wl@gnu.org> |
| |
| * src/tools/chktrcmp.py (trace_use_pat): Update to current use. |
| |
| 2020-11-20 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [cff,cid,type1] Demote old engine for lack of CFF2. |
| |
| * src/cff/cffobjs.c (cff_driver_init): Always default to Adobe engine. |
| * src/cid/cidobjs.c (cid_driver_init): Ditto. |
| * src/type1/t1objs.c (T1_Driver_Init): Ditto. |
| |
| 2020-11-09 Werner Lemberg <wl@gnu.org> |
| |
| * src/type42/t42parse.c (t42_parse_sfnts): More tracing messages. |
| |
| 2020-11-04 Werner Lemberg <wl@gnu.org> |
| |
| * meson.build: Fix .pc file generation. |
| |
| For backwards compatibility we need the libtool version, not the .so |
| number. |
| |
| Reported by Nikolaus. |
| |
| 2020-10-28 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Minor update to forthcoming OpenType 1.8.4 standard. |
| |
| * src/truetype/ttgxvar.c (ft_var_load_item_variation_store): Limit |
| size of `regionCount`. |
| |
| 2020-10-26 Werner Lemberg <wl@gnu.org> |
| |
| * meson.build: Fix 'harfbuzz' and 'brotli' build options (#59347). |
| |
| Without this patch, 'harfbuzz' and 'brotli' are always required. |
| |
| Patch submitted anonymously in Savannah bug report. |
| |
| 2020-10-23 Ben Wagner <bungeman@google.com> |
| |
| * src/sfnt/pngshim.c (Load_SBit_Png): Fix memory leak (#59322). |
| |
| The issue is that `rows` is allocated but will not be freed in the |
| event that the call to `png_read_image` fails and calls `longjmp`. |
| |
| 2020-10-20 Werner Lemberg <wl@gnu.org> |
| |
| * Version 2.10.4 released. |
| ========================== |
| |
| |
| Tag sources with `VER-2-10-4'. |
| |
| * docs/VERSION.TXT: Add entry for version 2.10.4. |
| * docs/CHANGES: Updated. |
| |
| * README, src/base/ftver.rc, builds/windows/vc2010/index.html, |
| builds/windows/visualc/index.html, |
| builds/windows/visualce/index.html, |
| builds/wince/vc2005-ce/index.html, |
| builds/wince/vc2008-ce/index.html, docs/freetype-config.1: |
| s/2.10.3/2.10.4/, s/2103/2104/. |
| |
| * include/freetype/freetype.h (FREETYPE_PATCH): Set to 4. |
| |
| * builds/unix/configure.raw (version_info): Set to 23:4:17. |
| * CMakeLists.txt (VERSION_PATCH): Set to 4. |
| |
| 2020-10-19 Werner Lemberg <wl@gnu.org> |
| |
| [sfnt] Fix heap buffer overflow (#59308). |
| |
| This is CVE-2020-15999. |
| |
| * src/sfnt/pngshim.c (Load_SBit_Png): Test bitmap size earlier. |
| |
| 2020-10-17 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/sfnt/tt{colr,cpal}.c: Fix signedness warnings from VC++. |
| |
| 2020-10-17 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/sfnt/sfwoff2.c (Read255UShort): Tweak types to please VC++. |
| |
| 2020-10-10 Werner Lemberg <wl@gnu.org> |
| |
| * Version 2.10.3 released. |
| ========================== |
| |
| |
| Tag sources with `VER-2-10-3'. |
| |
| * docs/VERSION.TXT: Add entry for version 2.10.3. |
| |
| * README, src/base/ftver.rc, builds/windows/vc2010/index.html, |
| builds/windows/visualc/index.html, |
| builds/windows/visualce/index.html, |
| builds/wince/vc2005-ce/index.html, |
| builds/wince/vc2008-ce/index.html, docs/freetype-config.1: |
| s/2.10.2/2.10.3/, s/2102/2103/. |
| |
| * include/freetype/freetype.h (FREETYPE_PATCH): Set to 3. |
| |
| * builds/unix/configure.raw (version_info): Set to 23:3:17. |
| * CMakeLists.txt (VERSION_PATCH): Set to 3. |
| |
| 2020-09-25 Werner Lemberg <wl@gnu.org> |
| |
| [autofit] Synchronize with ttfautohint. |
| |
| This corresponds to the following commits in the ttfautohint git |
| repository: |
| |
| bb6842bd3bd437b7b4a7921b0376c860f5e73d18 Typo, formatting. |
| d5c91ddb1cb310257a3dfe9a8e20e1fc51335faa Add Medefaidrin script. |
| |
| * src/autofit/afblue.dat: Add blue zone data for Medefaidrin. |
| * src/autofit/afblue.c, src/autofit/afblue.h: Regenerated. |
| |
| * src/autofit/afscript.h: Add Medefaidrin standard characters. |
| |
| * src/autofit/afranges.c, src/autofit/afstyles.h: Add Medefaidrin |
| data. |
| |
| 2020-09-25 Werner Lemberg <wl@gnu.org> |
| |
| Move `scripts/make_distribution_archives.py` to `src/tools`. |
| |
| * scr/tools/scripts/make_distribution_archives.py: (_TOP_DIR, |
| _SCRIPT_DIR): Updated to new location. |
| (main): s/shutils.copyfile/shutils.copy/ to preserve file |
| permissions. |
| (main): Prefix source file paths with `git_dir` while copying files |
| to allow calls of the script from other places than the top-level |
| directory. |
| |
| 2020-09-24 Werner Lemberg <wl@gnu.org> |
| |
| * src/cff/cffgload.c (cff_slot_load): Scale `vertBearingY`. |
| |
| Towards the end of the the function there is a call to |
| `FT_Outline_Get_CBox` that retrieves the glyph bbox in scaled units. |
| That sets `horiBearing{X,Y}` and `vertBearingX` but `vertBearingY` |
| is left alone, and is not scaled. |
| |
| Patch from Eric Muller <emuller@amazon.com>. |
| |
| 2020-09-24 Werner Lemberg <wl@gnu.org> |
| |
| * src/base/ftobjs.c (FT_Load_Glyph): Trace glyph metrics. |
| |
| 2020-09-22 Werner Lemberg <wl@gnu.org> |
| |
| [meson] Move auxiliary scripts to `builds/meson`. |
| |
| Suggested by Alexei. |
| |
| * scripts/*.py: Move meson scripts to... |
| * builds/meson/*.py: ... this new location. |
| |
| * meson.build: Updated. |
| |
| 2020-09-21 David Turner <david@freetype.org> |
| |
| Add python script for building tarballs. |
| |
| * scripts/make_distribution_archives.py: New file. |
| |
| This standalone Python script should be equivalent to running `make |
| dist` with the Make-based build system, with the following minor |
| differences: |
| |
| - Since `make distclean` doesn't always clean up `objs/` properly, |
| `make dist` archives may contain some stale binaries like |
| `objs/.libs/libfreetype.so.6` or others. |
| |
| - `config.guess` and `config.sub` are not updated unless option |
| `--gnu-config-dir=DIR` is used to specify the location of these |
| files. |
| |
| - Some bits of the auto-generated reference documentation may |
| appear in slightly different order, probably due to issues related |
| to mkdocs and docwriter. |
| |
| As an example, the call |
| |
| scripts/make_distribution_archives.py /tmp/freetype2-dist |
| |
| creates the following files under `/tmp/freetype2-dist`: |
| |
| freetype-<version>.tar.gz |
| freetype-<version>.tar.xz |
| ft<winversion>.zip |
| |
| 2020-09-21 Werner Lemberg <wl@gnu.org> |
| |
| * scripts/extract_freetype_version.py: Fix regex typos. |
| |
| 2020-09-21 David Turner <david@freetype.org> |
| |
| Add Meson build project file. |
| |
| Example usage: |
| |
| # Configure Meson build in directory `build-meson` to generate |
| # release binaries comparable to to the ones from the |
| # autotools/make build system. |
| meson setup build-meson \ |
| --prefix=/usr/local \ |
| --buildtype=debugoptimized \ |
| --strip \ |
| -Db_ndebug=true |
| |
| # After configuring the Meson build with the above command, |
| # compile and install to `/usr/local/`; this includes a pkg-config |
| # file. |
| ninja -C build-meson install |
| |
| # Alternatively, compile and install to `/tmp/aa/usr/local/...` |
| # for packaging. |
| DESTDIR=/tmp/aa ninja -C build-meson install |
| |
| # Generate documentation under `build-meson/docs`. |
| ninja -C build-meson docs |
| |
| Library size comparison for stripped `libfreetype.so` generated by |
| all three build systems: |
| |
| - Default build (autotools + libtool): 712 KiB |
| - CMake build (RelWithDebInfo): 712 KiB |
| - Meson build: 712 KiB |
| |
| |
| * meson.build: New top-level Meson build file for the library. |
| |
| * meson_options.txt: New file. It holds user-selectable options for |
| the build, which can be printed with `meson configure`, and selected |
| at `meson setup` or `meson --reconfigure` time with |
| `-D<option>=<value>`. |
| |
| * scripts/parse_modules_cfg.py: A script invoked by `meson.build` to |
| parse `modules.cfg` and extract important information out of it |
| (i.e., the list of modules). |
| |
| * scripts/process_ftoption_h.py: New script invoked by `meson.build` |
| to process the original `ftoption.h` file. It enables or disables |
| configuration macro variables based on the available dependencies. |
| This is similar to what other build systems are using (i.e., Meson's |
| `configure_file()` command is not used here). |
| |
| * scripts/extract_freetype_version.py: New script invoked by |
| `meson.build` to extract the FreeType version number from |
| `<freetype/freetype.h>`. |
| |
| * scripts/extract_libtool_version.py: New script invoked by |
| `meson.build` to extract the libtool `revision_info` data from |
| `builds/unix/configure.raw`, and to generate the corresponding |
| shared library suffix. |
| |
| * scripts/generate_reference_docs.py: New script invoked by |
| `meson.build` to generate the FreeType 2 reference documentation |
| (using the `docwriter` and `mkdocs` packages, which must be already |
| installed). |
| |
| 2020-09-11 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [raster] Improve the second pass (#58373). |
| |
| Besides dropout control the second horizontal sweep is supposed to |
| clean up straight horizontal edges that are mishandled by the first |
| vertical sweep when a line passes through pixel centers. This line |
| would present as perfectly aligned span edges in the second sweep. |
| |
| * src/raster/ftraster.c (Horizontal_Sweep_Span): Replace the old |
| implementation with a better one focusing on aligned span edges only. |
| |
| 2020-09-08 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [raster] Tune SMART macro (#58352). |
| |
| Windows seems to perform smart dropout control at 26.6 precision. |
| To mimick Windows independent of increased precision, we need to tweak |
| the macro so that some close calls break down rather than up. |
| |
| * src/raster/ftraster.c (SMART): Tweak the macro. |
| |
| 2020-09-08 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [raster] Introduce SMART macro. |
| |
| * src/raster/ftraster.c (SMART): New macro for smart dropout rounding. |
| (Verstical_Sweep_Drop, Horizontal_Sweep_Drop): Use it. |
| |
| 2020-09-03 Boris Dalstein <dalboris@gmail.com> |
| |
| [build] Make CMake install basic version information. |
| |
| * CMakeLists.txt: Do it. |
| |
| 2020-09-02 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [truetype] Reduce Infinality footprint (cont'd). |
| |
| * src/truetype/ttinterp.c (Ins_DELTAP): Shrink variable scope. |
| (Ins_SHPIX, Ins_MIRP): Revise if-logic. |
| |
| 2020-09-02 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [truetype] Reduce Infinality footprint. |
| |
| * src/truetype/ttinterp.c (Ins_SHPIX, Ins_MSIRP, Ins_MIAP, Ins_MDRP, |
| Ins_MIRP): Shrink variable scopes and consolidate ifdefs. |
| |
| 2020-09-01 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [truetype] Refactor compensation color. |
| |
| * src/truetype/ttinterp.h (TT_Round_Func): Change the last argument. |
| * src/truetype/ttinterp.c (Ins_ROUND, Ins_NROUND, Ins_MDAP, Ins_MIAP, |
| Ins_MDRP, Ins_MIRP): Move compensation retrieval from here... |
| (Round_*): ... to here. |
| * src/truetype/ttobjs.c (tt_size_init_bytecode): Reserve zero |
| compensation at color index 3. |
| |
| 2020-08-28 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Don't set target in direct mode. |
| |
| * src/smooth/ftsmooth.c (ft_smooth_raster_overlap): Remove assignment. |
| (ft_smooth_raster_lcd) [!FT_CONFIG_OPTION_SUBPIXEL_RENDERING]: Ditto. |
| |
| 2020-08-25 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/smooth/ftsmooth.c (ft_smooth_raster_overlap): Limit width. |
| |
| Segmentation fault reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=24729 |
| |
| 2020-08-22 Werner Lemberg <wl@gnu.org> |
| |
| * src/truetype/ttgload.c (TT_Get_VMetrics): Add tracing message. |
| |
| 2020-08-05 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [truetype] Retain OVERLAP_SIMPLE and OVERLAP_COMPOUND. |
| |
| For glyphs with OVERLAP_SIMPLE or OVERLAP_COMPOUND, set |
| FT_OUTLINE_OVERLAP to render them with direct oversampling, which |
| mitigates artifacts (see 3bb512bc9f62). |
| |
| * include/freetype/ftimage.h (FT_OUTLINE_OVERLAP): Redefine to rhyme |
| with OVERLAP_SIMPLE. |
| * src/base/ftgloadr.c (FT_GlyphLoader_Rewind): Reset outline flags. |
| * src/truetype/ttgload.c |
| (TT_Load_Simple_Glyph): Retain OVERLAP_SIMPLE. |
| (load_truetype_glyph): Retain OVERLAP_COMPOUND. |
| |
| 2020-08-04 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/truetype/ttgload.c (TT_Load_Glyph): More tracing. |
| |
| 2020-07-28 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| Hide internal functions with SunPro. |
| |
| * include/freetype/internal/compiler-macros.h |
| (FT_INTERNAL_FUNCTION_ATTRIBUTE) <__SUNPRO_C>: Define as __hidden. |
| |
| 2020-07-28 Anuj Verma <anujv@iitbhilai.ac.in> |
| |
| Fix static compilation with Visual C. |
| |
| * include/freetype/internal/compiler-macros.h |
| (FT_INTERNAL_FUNCTION_ATTRIBUTE) <_WIN32>: Define as empty. |
| |
| 2020-07-28 Priyesh Kumar <priyeshkkumar@gmail.com> |
| |
| Fix `-Wformat' compiler warnings. |
| |
| * src/*: Fix format specifiers. |
| |
| * builds/unix/ftsystem.c (FT_Stream_Open): Ditto. |
| |
| 2020-07-25 Werner Lemberg <wl@gnu.org> |
| |
| Fix `-Wformat' compiler warnings. |
| |
| Problem reported by Priyesh kumar <priyeshkkumar@gmail.com> |
| |
| * src/base/ftoutln.c (FT_Outline_Decompose): Fix number of arguments |
| to tracing macro. |
| |
| * src/bdf/bdfdrivr.c (bdf_cmap_char_next, bdf_get_bdf_property): |
| Ditto. |
| |
| * src/cache/ftcbasic.c (ftc_basic_family_get_count): Ditto. |
| Reformulate message. |
| |
| * src/pcf/pcfdrivr.c (pcf_get_bdf_property): Ditto. |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Ditto. |
| Trace table offset, too. |
| |
| * src/truetype/ttgxvar.c (ft_var_apply_tuple): Ditto. |
| |
| 2020-07-23 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (woff2_decompress): Fix compiler warning. |
| |
| Reported by Hin-Tak. |
| |
| 2020-07-12 Werner Lemberg <wl@gnu.org> |
| |
| * builds/unix/configure.raw: Fix inclusion of `ftoption.h'. |
| |
| 2020-07-07 Werner Lemberg <wl@gnu.org> |
| |
| Fix clang warnings. |
| |
| * include/freetype/internal/autohint.h |
| (FT_DECLARE_AUTOHINTER_INTERFACE): New macro. |
| * src/autofit/afmodule.h: Use it to declare |
| `af_autofitter_interface'. |
| |
| * include/freetype/internal/ftobjs.h (FT_DECLARE_GLYPH): New macro. |
| * src/base/ftbase.h: Use it to declare `ft_bitmap_glyph_class' and |
| `ft_outline_glyph_class'. |
| |
| * src/base/ftglyph.c: Include `ftbase.h'. |
| |
| * src/cff/cffparse.c (cff_parser_run): Fix type of `t2_size'. |
| |
| * src/pcf/pcfdrivr.c (pcf_cmap_char_next): Fix type of `result'. |
| |
| * src/psaux/psauxmod.c (psaux_module_class): Use `FT_DEFINE_MODULE'. |
| * src/psaux/psauxmod.h: Declare `afm_parser_funcs', |
| `t1_cmap_classes', `cff_decoder_funcs', and `psaux_module_class'. |
| |
| * src/pshinter/pshmod.c: Include `pshmod.h'. |
| |
| * src/sfnt/sfwoff2.c (ROUND4, WRITE_SHORT): Fix implicit sign |
| conversion. |
| (compute_ULong_sum): Fix return type. |
| Fix implicit sign conversion. |
| (store_points): Fix type of `last_flag', `repeat_count', and `flag'. |
| Use casts to avoid warnings. |
| (reconstruct_glyf): Fix implicit sign conversion. |
| Use cast to avoid warning. |
| (get_x_mins): Fix implicit sign conversion. |
| * src/sfnt/ttcmap.c: Undef `TTCMAPCITEM'. |
| * src/sfnt/ttcmap.h: Define `TTCMAPCITEM' and include `ttcmapc.h' to |
| declare cmap classes. |
| |
| * src/smooth/ftsmooth.c (ft_smooth_overlap_spans): Use cast. |
| |
| * src/truetype/ttinterp.c (Ins_MIAP): Fix typo. |
| |
| 2020-07-07 David Turner <david@freetype.org> |
| |
| [build] Really fix multi and C++ builds. |
| |
| The following builds were still failing due to previous changes: |
| |
| make multi |
| make multi CC="c++" |
| make CC="c++" |
| |
| This patch fixes the issues, which were missing includes to get the |
| right macro definitions in multi-build mode. |
| |
| Also, `FT_UNUSED' is actually used by third-party code, so move it |
| back to `public-macros.h' to avoid breaking it. |
| |
| * include/freetype/config/public-macros.h (FT_EXPORT): Remove |
| special definition for C++. |
| (FT_UNUSED): Define here instead of... |
| * include/freetype/config/compiler-macros.h: ... here. |
| (FT_FUNCTION_DECLARATION): Remove special definition for C++. |
| (FT_LOCAL_ARRAY_DEF): Fix definition. |
| |
| * src/cache/ftccback.h, src/lzw/ftzopen.h, src/gxvalid/gxvmort.h, |
| src/gxvalid/gxvmorx.h: Add `FT_BEGIN_HEADER' and `FT_END_HEADER'. |
| |
| 2020-07-06 David Turner <david@freetype.org> |
| |
| [build] Fix multi and C++ builds. |
| |
| The following builds were failing due to previous changes: |
| |
| make multi |
| make multi CC="c++" |
| |
| * include/freetype/config/ftconfig.h: Remove `FT_END_HEADER'. |
| |
| * include/freetype/config/ftheader.h (FT_BEGIN_HEADER, |
| FT_END_HEADER): Protect against redefinition. |
| |
| * src/cache/ftccache.h, src/cache/ftcmru.h, src/pcf/pcfutil.h, |
| src/psaux/pserror.h, src/psaux/psft.h, src/psaux/psstack.h, |
| src/sfnt/woff2tags.h: Include `compiler-macros.h'. |
| |
| * src/sfnt/woff2tags.c: Include `woff2tags.h'. |
| |
| 2020-07-06 Werner Lemberg <wl@gnu.org> |
| |
| [psaux] Improve `t1_decoder_parse_metrics' (#58646). |
| |
| * src/psaux/t1decode.c (t1_decoder_parse_metrics): Copy |
| corresponding code from old engine's `t1_decoder_parse_charstrings' |
| function to handle `op_callsubr' and `op_return'. |
| |
| 2020-07-05 David Turner <david@freetype.org> |
| |
| [build] Improve visibility support of library function names. |
| |
| * include/freetype/config/public-macros.h |
| (FT_PUBLIC_FUNCTION_ATTRIBUTE): New macro to tag functions as |
| public (and thus exportable). |
| (FT_EXPORT): Use it. |
| |
| * include/freetype/config/compiler-macros.h |
| (FT_INTERNAL_FUNCTION_ATTRIBUTE): New macro to tag functions as |
| internal to the library (and thus hidden). Note that on ELF |
| systems, all internal functions have hidden visibility, which avoids |
| the need to enforce this when invoking the compiler (e.g., with an |
| option like `-fvisibility=hidden'). |
| |
| (FT_FUNCTION_DECLARATION, FT_FUNCTION_DEFINITION): New base macros |
| to deal with C and C++ linkage issues at the same time. |
| |
| (FT_LOCAL, FT_LOCAL_DEF, FT_LOCAL_ARRAY, FT_LOCAL_ARRAY_DEF, |
| FT_BASE, FT_BASE_DEF, FT_EXPORT_VAR, FT_BASE_CALLBACK, |
| FT_BASE_CALLBACK_DEF): Redefined using new macros. |
| |
| 2020-07-05 David Turner <david@freetype.org> |
| |
| [build] Split off more stuff from `ftconfig.h'. |
| |
| * builds/unix/ftconfig.h.in, builds/vms/ftconfig.h, |
| include/freetype/config/ftconfig.h: Split off macro definitions |
| required by the FreeType API headers to... |
| * include/freetype/config/public-macros.h: ...this new file. |
| |
| * builds/unix/ftconfig.h.in, builds/vms/ftconfig.h, |
| include/freetype/config/ftconfig.h: Split off macro definitions used |
| by the library but not to be exposed to clients to... |
| * include/freetype/config/compiler-macros.h: ...this new file. |
| |
| * include/freetype/internal/*.h, src/raster/ftraster.h: Include |
| `compiler-macros.h' where needed. |
| |
| 2020-07-05 David Turner <david@freetype.org> |
| |
| [build] Move mac support code to `mac-support.h'. |
| |
| * builds/unix/ftconfig.h.in, builds/vms/ftconfig.h, |
| include/freetype/config/ftconfig.h: Split off mac-specific stuff |
| to... |
| * include/freetype/config/mac-support.h: ...this new file. |
| |
| * CMakeLists.txt, builds/unix/configure.raw: Remove `/undef -> |
| #undef' string replacement; the affected code is no longer part of |
| the `ftconfig.h' template. |
| |
| 2020-07-05 David Turner <david@freetype.org> |
| |
| [build] Put integer type definitions into `integer-types.h'. |
| |
| Refactor some of the `ftconfig.h' headers and template to move the |
| definition of the FreeType integer types (e.g., `FT_Int16') to a |
| common header file `freetype/config/integer-types.h'. |
| |
| * builds/unix/ftconfig.h.in, builds/vms/ftconfig.h, |
| include/freetype/config/ftconfig.h: Split off integer type |
| definition stuff to... |
| * include/freetype/config/integer-types.h: ...this new file. |
| |
| * builds/unix/ftconfig.h.in: Control the definition of |
| `FT_SIZEOF_INT' and `FT_SIZEOF_LONG' with macro |
| `FT_USE_AUTOCONF_SIZEOF_TYPES'. If these are not defined, auto |
| detection happens in `integer-types.h' as usual based on `INTXX_MAX' |
| values. Otherwise the autoconf-detected values are used. |
| |
| * builds/unix/configure.raw (CPPFLAGS): Don't include path to |
| `config' directory. Instead, ... |
| (FT_CONFIG_STANDARD_LIBRARY_H): Use complete path. |
| |
| 2020-07-05 David Turner <david@freetype.org> |
| |
| [build] Rename `build/unix/ftconfig.in' to `ftconfig.h.in'. |
| |
| Since we are no longer limited to 8.3 file names, it is simpler to |
| follow the usual conventions for template files. |
| |
| * builds/unix/ftconfig.in: Renamed to... |
| * builds/unix/ftconfig.h.in: ...this. |
| |
| * CMakeLists.txt, builds/unix/configure.raw: Updated. |
| |
| 2020-07-03 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Introduce direct oversampling for overlaps. |
| |
| This implements oversampling to mitigate artifacts in pixels partially |
| covered by overlapping contours. It turns out that the 4x4 |
| oversampling is sufficient but, at least, quadruples the rendering |
| time. The outline has to set FT_OUTLINE_OVERLAP to use this method. |
| |
| * include/freetype/ftimage.h (FT_OUTLINE_OVERLAP): New flag. |
| * src/smooth/ftsmooth.c (ft_smooth_render): Check it to... |
| (ft_smooth_raster_overlap): ... inflate outline and set up direct |
| rendering for oversampling with... |
| (ft_smooth_overlap_spans): ... new span function that integrates them. |
| |
| 2020-07-03 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Use direct rendering mode in Harmony. |
| |
| Instead of rendering 3 bitmaps side by side and reshuffling, we use |
| direct rendering to deliver the bitmaps on each third byte. |
| |
| * src/smooth/ftsmooth.c (ft_smooth_raster_lcd) |
| [!FT_CONFIG_OPTION_SUBPIXEL_RENDERING]: Set up direct mode with... |
| (ft_smooth_lcd_spans): ... new span function. |
| |
| 2020-07-03 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Separate LCD paths from gray rendering. |
| |
| This makes `ft_smooth_render' a lot smaller and easier to follow. It |
| also cleanly separates Harmony and ClearType-style LCD rendering |
| algorithms. Now I only wish to move LCD filtering and geometry from |
| FT_Library to FT_Renderer. |
| |
| * src/smooth/ftsmooth.c (ft_smooth_render): Move LCD code from here... |
| (ft_smooth_raster_lcd, ft_smooth_raster_lcdv): ... to here. |
| [FT_CONFIG_OPTION_SUBPIXEL_RENDERING]: Reorganize #ifdef's. |
| |
| 2020-06-20 Sebastian Rasmussen <sebras@gmail.com> |
| |
| [cff] Fix handling of `style_name == NULL' (#58630). |
| |
| * src/cff/cffobjs.c (cff_face_init): If a call to `cff_strcpy' fails |
| by returning NULL in `cff_face_init', `remove_style' is still |
| called. This means that the NULL pointer is dereferenced, causing a |
| crash. |
| |
| 2020-06-19 Sebastian Rasmussen <sebras@gmail.com> |
| |
| [cff] Fix another two memory leaks (#58629). |
| |
| * src/cff/cffobjs.c (cff_size_init): If a call to `funcs->create' |
| fails to allocate one of the `internal->subfont' variables, make |
| sure to free `internal->topfont' and any successfully allocated |
| subfonts. |
| |
| 2020-06-19 Sebastian Rasmussen <sebras@gmail.com> |
| |
| [psaux] Fix memory leak (#58626). |
| |
| * src/psaux/psstack.c (cf2_stack_init): If `cf2_stack_init' fails to |
| allocate the stack, return error early. |
| |
| 2020-06-19 Sebastian Rasmussen <sebras@gmail.com> |
| |
| [base] Fix memory leak (#58624). |
| |
| * src/base/ftobjs.c (FT_New_Size): Avoid trying to free |
| `size->internal' unless `size' has been allocated. This mistake |
| appeared in the fix for issue #58611. |
| |
| 2020-06-19 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [base] Rework d1180b5f9598 until further notice. |
| |
| * src/base/ftoutln.c (FT_Outline_Get_Orientation): Reject large |
| outlines. |
| |
| 2020-06-19 Sebastian Rasmussen <sebras@gmail.com> |
| |
| [cff, cid] Fix segfaults in case of error (#58621). |
| |
| * src/cff/cffobjs.c (cff_slot_done), src/cid/cidobjs.c |
| (cid_slot_done): If `ft_glyphslot_init' fails to allocate |
| `internal', then the class' `done_slot' callback (called by |
| `ft_glyphslot_done') must not dereference the pointer to `internal'. |
| |
| 2020-06-19 Werner Lemberg <wl@gnu.org> |
| |
| [base] Fix UBSAN error. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=23166 |
| |
| * src/base/ftoutln.c (FT_Outline_Get_Orientation): Avoid values |
| larger than 32 bits. |
| |
| 2020-06-19 Werner Lemberg <wl@gnu.org> |
| |
| [woff2] Fix segfault. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=23402 |
| |
| * src/sfnt/sfwoff2.c (get_x_mins): Check whether `loca' table |
| exists. |
| |
| 2020-06-19 Stephen McDowell <svenevs.dev@gmail.com> |
| |
| [sfnt] Support Intel compilers. |
| |
| * src/sfnt/pngshim.c (premultiply_data): Intel compilers do not |
| currently support `__builtin_shuffle'. |
| |
| 2020-06-19 Sebastian Rasmussen <sebras@gmail.com> |
| |
| [base] Fix memory leak (#58611). |
| |
| * src/base/ftobjs.c (FT_New_Size): When the call to `clazz->init_size' |
| fails, make sure to free `size->internal'. |
| |
| 2020-06-19 Sebastian Rasmussen <sebras@gmail.com> |
| |
| [cff] Fix memory leak (#58610). |
| |
| * src/cff/cffobjs.c (cff_size_init): When the call to |
| `funcs->create' fails, make sure to free `internal'. |
| |
| 2020-06-19 Werner Lemberg <wl@gnu.org> |
| |
| * src/cff/cffload.c (cff_index_get_pointers): Rename `t' to `tbl'. |
| |
| 2020-06-19 Sebastian Rasmussen <sebras@gmail.com> |
| |
| [cff] Free table upon error allocating other data (#58609). |
| |
| * src/cff/cffload.c (cff_index_get_pointers): When new_bytes fails |
| to allocate, make sure to free the table. Do the same for both |
| allocations if there is a later error. |
| |
| 2020-06-13 Werner Lemberg <wl@gnu.org> |
| |
| Remove redundant inclusion of `ft2build.h'. |
| |
| * */*: Remove `#include <ft2build.h>' where possible. |
| |
| * include/freetype/freetype.h: Remove cpp error about missing |
| inclusion of `ft2build.h'. |
| |
| 2020-06-08 David Turner <david@freetype.org> |
| |
| Make macros for header file names optional. |
| |
| We no longer have to take care of the 8.3 file name limit; this |
| allows us (a) to introduce longer, meaningful file names, and (b) to |
| avoid macro names in `#include' lines altogether since some |
| compilers (most notably Visual C++) doesn't support this properly. |
| |
| */*: Replace |
| |
| #include FOO_H |
| |
| with |
| |
| #include <freetype/foo.h> |
| |
| or something similar. Also update the documentation. |
| |
| 2020-06-02 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/ttcmap.c (tt_face_build_cmaps): Trace number of cmaps. |
| |
| 2020-05-18 David Turner <david@freetype.org> |
| |
| Remove obsolete HAVE_STDINT_H probing macro. |
| |
| This macro was updated by the unix configure script and the |
| `CMakeLists.txt' one, but is never used in the source tree (nor is |
| <stdint.h> included anywhere). |
| |
| * CMakeLists.txt, builds/unix/ftconfig.in: Don't handle |
| `HAVE_STDINT_H'. |
| |
| 2020-05-18 David Turner <david@freetype.org> |
| |
| Remove Jamfile files from the tree. |
| |
| These have not been used in a very, very long time, so better remove |
| them. A corresponding patch will be submitted to the |
| `freetype2-demos' repository. |
| |
| * src/Jamfile, src/*/Jamfile, Jamrules: Delete. |
| |
| 2020-05-12 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Turn on LCD filtering during FreeType initialization. |
| |
| * src/smooth/ftsmooth.c (ft_smooth_init): Enable LCD filtering. |
| |
| * include/freetype/ftlcdfil.h: Document it, remove patent warnings. |
| * include/freetype/freetype.h (FT_Render_Mode): Updated. |
| * include/freetype/config/ftoption.h, devel/ftoption.h |
| [FT_CONFIG_OPTION_SUBPIXEL_RENDERING]: Do not mention patents. |
| |
| 2020-05-11 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Stop using dedicated LCD modules and classes. |
| |
| The LCD modules were never truly independent. They mostly served as |
| a way to disable patented LCD rendering, which is no longer necessary. |
| The `smooth' module now handles LCD modes as well. |
| |
| * src/smooth/ftsmooth.c (ft_smooth_lcd_renderer_class. |
| ft_smooth_lcdv_renderer_class): Deleted. |
| (ft_render_smooth): Reworked from `ft_render_smooth_generic'. |
| * src/smooth/ftsmooth.h: Remove dedicated LCD classes. |
| * src/smooth/module.mk: Remove dedicated LCD modules. |
| * include/freetype/config/ftmodule.h: Ditto. |
| * builds/amiga/include/config/ftmodule.h: Ditto. |
| * include/freetype/ftmodapi.h: Do not mention LCD modules. |
| |
| 2020-05-09 Werner Lemberg <wl@gnu.org> |
| |
| * Version 2.10.2 released. |
| ========================== |
| |
| |
| Tag sources with `VER-2-10-2'. |
| |
| * docs/VERSION.TXT: Add entry for version 2.10.2. |
| |
| * README, Jamfile (RefDoc), src/base/ftver.rc, |
| builds/windows/vc2010/index.html, builds/windows/visualc/index.html, |
| builds/windows/visualce/index.html, |
| builds/wince/vc2005-ce/index.html, |
| builds/wince/vc2008-ce/index.html, docs/freetype-config.1: |
| s/2.10.1/2.10.2/, s/2101/2102/. |
| |
| * include/freetype/freetype.h (FREETYPE_PATCH): Set to 2. |
| |
| * builds/unix/configure.raw (version_info): Set to 23:2:17. |
| * CMakeLists.txt (VERSION_PATCH): Set to 2. |
| |
| * docs/CHANGES: Updated. |
| |
| 2020-05-08 Jakub Alba <jalba@vewd.com> |
| |
| * src/truetype/ttinterp.c (TT_RunIns): Adjust loop counter (#58319). |
| |
| The font that exceeds the old limit is Icono Regular, version |
| 1.00000. |
| |
| 2020-05-03 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * builds/freetype.mk: Refactor for readability. |
| |
| 2020-05-02 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [builds] Clean up Windows CE project files. |
| |
| Remove version from filenames that caused a lot of polution in the |
| release process. Use VERSIONINFO resource instead. |
| |
| * builds/wince/vc2005-ce/freetype.vcproj, |
| builds/wince/vc2008-ce/freetype.vcproj, |
| builds/windows/visualce/freetype.vcproj, |
| builds/windows/visualce/freetype.dsp: s/2101//g, but add `ftver.rc'. |
| * builds/wince/vc2008-ce/index.html, |
| builds/wince/vc2005-ce/index.html, |
| builds/windows/visualce/index.html: s/2101//g. |
| |
| 2020-05-01 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * devel/ft2build.h: Override FT_CONFIG_MODULES_H here as well. |
| |
| 2020-05-01 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [builds/unix] Consolidate marco overrides (for the demos to see them). |
| |
| * builds/unix/unix-cc.in (FT_CONFIG_MODULES_H, FT_CONFIG_OPTIONS_H): |
| Override them here... |
| * builds/freetype.mk: ... instead of here. |
| |
| 2020-04-08 Werner Lemberg <wl@gnu.org> |
| |
| Allow setting `CC' in Unix build (#58051). |
| |
| * builds/unix/unix-cc.in (CC): Use `override'. The command line |
| value of `CC' (if any) is stored already in `CCraw'. |
| |
| 2020-04-04 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Return if single stream operation fails. |
| |
| * src/sfnt/sfwoff2.c (get_x_mins): Do it. |
| |
| * src/sfnt/woff2tags.c: Remove unused include. |
| |
| 2020-03-22 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [docs] Fix building docs if `srcdir' != `builddir'. |
| |
| `docs/reference/*' was moved one directory up in commit 237fed6. |
| |
| * builds/unix/unix-def.in (PIP): Remove variable. |
| |
| * configure: Create `docs' directory and copy assets from |
| `docs/markdown'. |
| |
| * docs/README: Output directory is `reference'. |
| |
| 2020-03-21 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [docwriter] Drop support for Python < 3.5. |
| |
| Python versions < 3.5 have reached end-of-life and as such, no |
| security or bug fixes will be provided for those versions. See |
| |
| https://devguide.python.org/#status-of-python-branches |
| |
| for more information. |
| |
| * Jamfile (RefDoc): Add `site' parameter. |
| |
| * builds/detect.mk (std_setup): Update Python version requirement. |
| |
| * builds/freetype.mk (refdoc-venv): Use pip as `python -m pip'. |
| |
| * builds/unix/ax_compare_version.m4, |
| builds/unix/ax_prog_python_version.m4: Macros to detect Python |
| version. New files. |
| |
| * builds/unix/configure.raw: Check for Python >= 3.5 and remove |
| check for `pip'. |
| |
| * docs/CHANGES, docs/INSTALL.GNU, docs/README: Updated. |
| |
| 2020-03-02 Moazin Khatti <moazinkhatri@gmail.com> |
| |
| [gzip] Support `gzip' encoded header conditionally. |
| |
| In order to support `gzip' encoded header the call to |
| `inflateInit2' was modified in commit 6a92b1fadde26477a9179. |
| However, this code breaks with the outdated internal version |
| of zlib. This is a temporary fix to conditionally support |
| `gzip' encoded header whenever a system installation of zlib |
| is being used. |
| |
| Problem report in |
| |
| https://lists.nongnu.org/archive/html/freetype-devel/2020-02/msg00023.html |
| |
| * src/gzip/ftgzip.c (FT_Gzip_Uncompress): Change the the call to |
| `inflateInit2' depending on whether the system installation is |
| being used or the internal copy. |
| |
| 2020-02-29 Ben Wagner <bungeman@google.com> |
| |
| [truetype] Fix state of `FT_Face' for buggy `gvar' tables (#57923). |
| |
| By resetting the blend as implemented with this commit fonts with |
| invalid `gvar' tables may keep calling into `ft_var_load_gvar' from |
| `tt_set_mm_blend' and failing, but the font was invalid anyway and |
| we want to keep seeing the failure in `tt_set_mm_blend'. |
| |
| * src/truetype/ttgxvar.c (ft_var_load_gvar): Calculate length of |
| offset array once. |
| Allocate arrays after `FT_FRAME_ENTER' (extra check before |
| allocating and avoid needing to free array later if error entering |
| frame). |
| Always call `FT_FRAME_EXIT'. |
| Consistently set counts immediately after array initialized. |
| Reset the blend (particularly `blend->glyphoffsets') on failure. |
| |
| 2020-03-01 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [docs] Update docwriter stylesheet. |
| |
| This change is required to support docwriter 1.2.1. |
| |
| See |
| |
| https://github.com/freetype/docwriter/issues/36 |
| |
| for more information. |
| |
| * docs/markdown/stylesheets/extra.css: |
| (.md-typeset code) -> (.md-typeset pre>code) |
| (pre) -> (pre>code) |
| (p, .md-typeset p, h4): Remove commented styles. |
| (table.index): Remove unused styles. |
| |
| 2020-02-28 Ben Wagner <bungeman@google.com> |
| |
| [truetype] Add better checks for loading `gvar' table (#57905). |
| |
| * src/truetype/ttgxvar.c (ft_var_load_gvar): Delay settings of any |
| `blend->xxxcount' values until the corresponding data has been |
| checked. |
| Also do some sanitizing to avoid a too early exit. |
| |
| (TT_Vary_Apply_Glyph_Deltas): Improve tracing message. |
| |
| 2020-02-27 Werner Lemberg <wl@gnu.org> |
| |
| Make `FT_HAS_*' and `FT_IS_*' really return true (#57906). |
| |
| * include/freetype/freetype.h (FT_HAS_*, FT_IS_*): Implement it. |
| |
| 2020-02-25 Dominik Röttsches <drott@chromium.org> |
| |
| Fix for CFF space glyph regression (#57541). |
| |
| * src/psaux/psft.c (cf2_decoder_parse_substrings): Replace early-out |
| with FT_OFFSET. |
| |
| 2020-02-22 Werner Lemberg <wl@gnu.org> |
| |
| [woff2] Fix font table access. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=20778 |
| |
| * src/sfnt/sfwoff2.c (get_x_mins): Explicitly check for presence of |
| `head' table, which might not have been processed yet. |
| |
| 2020-02-21 Werner Lemberg <wl@gnu.org> |
| |
| [psaux] Make `t1_decoder_parse_metrics' handle `op_div' (#57519). |
| |
| * src/psaux/t1decode.c (t1_decoder_parse_metrics): Copy |
| corresponding code from old engine's `t1_decoder_parse_charstrings' |
| function. |
| |
| 2020-02-19 Nikolaus Waxweiler <nikolaus.waxweiler@daltonmaag.com> |
| |
| [autofit] Add support for Hanifi Rohingya script. |
| |
| * src/autofit/afblue.dat: Add blue zone data for Hanifi Rohingya. |
| * src/autofit/afblue.c, src/autofit/afblue.h: Regenerated. |
| |
| * src/autofit/afscript.h: Add Hanifi Rohingya standard character. |
| |
| * src/autofit/afranges.c, src/autofit/afstyles.h: Add Hanifi |
| Rohingya data. |
| |
| 2020-02-19 Werner Lemberg <wl@gnu.org> |
| |
| Require HarfBuzz 1.8. |
| |
| * builds/unix/configure.raw, CMakeLists.txt: Request HarfBuzz 1.8.0 |
| or newer. |
| |
| We are going to add auto-hinter support for Hanifi Rohingya, which |
| was introduced in Unicode 11.0. |
| |
| 2020-02-12 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/ttcmap.c (tt_face_build_cmaps): Ignore version (#57708). |
| |
| 2020-02-04 Werner Lemberg <wl@gnu.org> |
| |
| * src/truetype/ttinterp.c (TT_RunIns): Adjust loop counter (#57732). |
| |
| The font that exceeds the old limit is Constantine, version 1.001. |
| |
| 2020-01-04 Werner Lemberg <wl@gnu.org> |
| |
| [base] Fix `FREETYPE_PROPERTIES=type1:hinting-engine=adobe`. |
| |
| * src/base/ftpsprop.c (ps_property_set) [hinting-engine]: Avoid an |
| incorrect return value that caused a warning. The function did the |
| right thing, though. |
| |
| 2020-01-03 Werner Lemberg <wl@gnu.org> |
| |
| [woff2] Fix memory leaks and a runtime warning. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19773 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=18101 |
| |
| * src/sfnt/sfwoff2.c (compute_ULong_sum): Add missing cast. |
| (reconstruct_hmtx): Add missing deallocation calls. |
| |
| 2020-01-02 Dominik Röttsches <drott@chromium.org> |
| |
| [truetype] Fix UBSan warning on offset to nullptr (#57501). |
| |
| * src/truetype/ttinterp.c (Ins_CALL): Fail if `exc->FDefs' is null. |
| |
| 2019-12-31 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Allow bitmap-only fonts (#57394). |
| |
| * src/sfnt/sfwoff2.c (reconstruct_font): Fix test for `glyf' and |
| `loca' tables. |
| |
| 2019-12-21 Hugh McMaster <hugh.mcmaster@outlook.com> |
| |
| [docs] (2/2) Fix generation of API documentation (#56745). |
| |
| Creating the API Reference in the (new) `reference' sub-directory is |
| consistent with other documentation sub-topics, such as `design', |
| `glyphs' and `tutorial'. |
| |
| This patch fixes broken hyperlinks in the documentation pointing to |
| and from the API Reference. It also allows web assets to load from |
| their relative paths. |
| |
| * builds/freetype.mk (DOC_DIR): Adjust. |
| (refdoc, refdoc-venv): Add `--site' argument. |
| |
| * builds/toplevel.mk (do-dist): Updated. |
| |
| 2019-12-21 Hugh McMaster <hugh.mcmaster@outlook.com> |
| |
| [docs] (1/2) Move static web assets (#56745). |
| |
| * docs/reference/*: Move ... |
| * docs: ... one directory up. |
| |
| 2019-12-21 Dominik Röttsches <drott@chromium.org> |
| |
| Fix more UBSan warnings on adding offset to nullptr (#57432). |
| |
| * src/truetype/ttinterp.c (Ins_LOOPCALL), src/psaux/psft.c |
| (cf2_initLocalRegionBuffer): Use `FT_OFFSET'. |
| |
| 2019-12-16 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Fix UBSan warnings on adding offsets to nullptr. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/chromium/issues/detail?id=1032152 |
| |
| * src/truetype/ttinterp.c (Ins_FDEF, Ins_IDEF): Use `FT_OFFSET'. |
| |
| 2019-12-14 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Fix integer overflow. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19305 |
| |
| * src/truetype/ttinterp.c (Ins_MIRP): Use `ADD_LONG'. |
| |
| 2019-12-13 Werner Lemberg <wl@gnu.org> |
| |
| Another bunch of UBSan warnings on adding offsets to nullptr. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19427 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19433 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19441 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19451 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19452 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=19457 |
| |
| * src/autofit/aflatin.c (af_latin_hints_compute_segments, |
| af_latin_hints_compute_edges): Use `FT_OFFSET'. |
| |
| * src/base/ftstream.c (FT_Stream_EnterFrame): Use `FT_OFFSET'. |
| |
| * src/psaux/cffdecode.c (cff_decoder_parse_charstrings): Exit early |
| if there is no charstring. |
| |
| * src/psaux/psobjs.c (t1_decrypt): Use `FT_OFFSET'. |
| |
| * src/smooth/ftsmooth.c (ft_smooth_render_generic): Exit early for |
| zero bitmap dimensions. |
| |
| 2019-12-09 Dominik Röttsches <drott@chromium.org> |
| |
| Fix more UBSan warnings on adding offset to nullptr (#57384). |
| |
| * src/smooth/ftsmooth.c (ft_smooth_render_generic), |
| src/psaux/psobjs.c (ps_table_add): Use `FT_OFFSET'. |
| |
| 2019-12-05 Werner Lemberg <wl@gnu.org> |
| |
| * src/truetype/ttinterp.c (TT_RunIns): Use `FT_OFFSET'. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/chromium/issues/detail?id=1030614 |
| |
| 2019-12-03 Werner Lemberg <wl@gnu.org> |
| |
| More nullptr offset UBSan warnings (#57331, #57347). |
| |
| * src/autofit/afcjk.c (af_cjk_hints_compute_segments), |
| src/psaux/psft.c (cf2_getSeacComponent), src/truetype/ttinterp.c |
| (Ins_UNKNOWN): Use `FT_OFFSET'. |
| |
| 2019-11-29 Dominik Röttsches <drott@chromium.org> |
| |
| Avoid more nullptr offset UBSan warnings (#57316). |
| |
| * src/base/ftoutln.c (FT_Outline_Transform): Bail on empty points. |
| * src/cff/cffload.c (cff_subfont_load): Use `FT_OFFSET'. |
| * src/psaux/psft.c (cf2_decoder_parse_substrings): Early out if |
| `charstring_base' or `charstring_len' are null. |
| * src/sfnt/ttload.c (tt_face_load_name): Use `FT_OFFSET'. |
| |
| 2019-11-23 John Stracke <jstracke@Google.com> |
| |
| [base] Really fix #57194. |
| |
| Apply accidentally missed second part of patch. |
| |
| * src/base/ftgloadr.c (FT_GlyphLoader_CheckPoints): Call |
| `FT_GlyphLoader_CreateExtra'. |
| |
| 2019-11-23 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Avoid sanitizer warning (#57289). |
| |
| * src/truetype/ttpload.c (tt_face_get_device_metrics): Use |
| `FT_OFFSET'. |
| |
| 2019-11-23 Armin Hasitzka <prince.cherusker@gmail.com> |
| |
| [truetype] Fix integer overflow (#57287). |
| |
| * src/truetype/ttgload.c (compute_glyph_metrics): Use `SUB_LONG'. |
| |
| 2019-11-23 Ben Wagner <bungeman@google.com> |
| |
| [sfnt] Avoid sanitizer warning (#57286). |
| |
| * src/sfnt/ttcmap.c (tt_face_build_cmaps): Avoid possible `NULL + |
| offset' computation. |
| Tag `table' as `const'. |
| |
| 2019-11-23 John Stracke <jstracke@Google.com> |
| Werner Lemberg <wl@gnu.org> |
| |
| [base] Fix `NULL + offset' sanitizer warnings (#57194). |
| |
| * src/base/ftgloadr.c (FT_GlyphLoader_Adjust_Points, |
| FT_GlyphLoader_Adjust_Subglyphs): Use `FT_OFFSET'. |
| (FT_GlyphLoader_CreateExtra): Add short cut if some values are zero. |
| |
| 2019-11-23 Werner Lemberg <wl@gnu.org> |
| |
| * include/freetype/internal/ftmemory.h (FT_OFFSET): New macro. |
| |
| Use this for `base + offset' pointer calculations where `base' can |
| be NULL (triggering a sanitizer warning even if the resulting |
| pointer gets never dereferenced since it is undefined behaviour |
| in C). |
| |
| Suggested by Ben Wagner. |
| |
| 2019-11-23 Ben Wagner <bungeman@google.com> |
| |
| [sfnt] Ensure OTTO fonts have tables (#57285). |
| |
| * src/sfnt/ttload.c (tt_face_load_font_dir): Add test. |
| |
| 2019-11-23 Behdad Esfahbod <behdad@behdad.org> |
| |
| Minor fixes for recent compilers. |
| |
| * src/gzip/infutil.h (inflate_mask): Add `const'. |
| |
| * src/autofit/aflatin2.c: Include `ft2build.h'. |
| |
| 2019-11-07 Nikolaus Waxweiler <madigens@gmail.com> |
| |
| * CMakeLists.txt: Minor additions to the notes, compile |
| builds/unix/ftsystem.c instead of src/base/ftsystem.c on UNIX. |
| |
| The latter change is based on the code proposed by rim in #55235. |
| |
| 2019-10-25 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Check `num_fonts' for TTCs. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=18494 |
| |
| 2019-10-22 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Avoid undefined shift. |
| |
| Also improve tracing. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=18390 |
| |
| 2019-10-10 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/sfnt/pngshim.c (premultiply_data): Optimize for __SSE__ only. |
| |
| 2019-10-10 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (reconstruct_glyf): Check `triplet_size'. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=18108 |
| |
| 2019-10-09 John Tytgat <John.Tytgat@esko.com> |
| |
| [cff] Fix FT_FACE_FLAG_GLYPH_NAMES for CFF2 based fonts (#57023). |
| |
| * src/cff/cffobjs.c (cff_face_init): Don't set |
| FT_FACE_FLAG_GLYPH_NAMES for CFF2 based fonts. |
| |
| 2019-10-08 Werner Lemberg <wl@gnu.org> |
| |
| [woff2] Fix SFNT table checks. |
| |
| Also reduce number of SFNT table lookups. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=18065 |
| |
| * include/freetype/internal/wofftypes.h (WOFF2_InfoRec): Add fields |
| `glyf_table', `loca_table', and `head_table'. |
| |
| * src/sfnt/sfwoff2.c (reconstruct_glyf): Update signature. |
| Use table pointers in `info' parameter. |
| (get_x_mins): Check `maxp_table' |
| Use table pointers in `info' parameter. |
| (reconstruct_font): Use and set table pointers in `info' parameter. |
| Fix check for `glyf' and `loca' tables. |
| Update call to `reconstruct_glyf'. |
| (woff2_open_font): Updated. |
| |
| 2019-10-06 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (reconstruct_glyf): Fix reallocation. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=18046 |
| |
| 2019-10-06 Werner Lemberg <wl@gnu.org> |
| |
| Improve memory debugging. |
| |
| * include/freetype/internal/ftmemory.h (FT_MEM_FREE): Use |
| `FT_DEBUG_INNER' to set source code file name and line. |
| |
| * src/base/ftdbgmem.c (ft_mem_table_remove): Better formatting of |
| tracing message. |
| |
| 2019-10-03 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2 (reconstruct_font): Fix reallocation. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=17966 |
| |
| 2019-10-01 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/base/ftstroke.c (ft_stroker_inside): Speed up. |
| |
| 2019-10-01 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2 (woff2_open_font): Initialize `woff2.ttc_fonts'. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=17804 |
| |
| 2019-09-30 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (reconstruct_font): Fix memory leak. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=17812 |
| |
| 2019-09-30 Werner Lemberg <wl@gnu.org> |
| |
| [woff2] Reject fonts without `head' table. |
| |
| Also fix memory deallocation in case of error. |
| |
| `head' problem reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=17820 |
| |
| * src/sfnt/sfwoff2.c (reconstruct_glyf): Don't use `stream_close'. |
| Abort if `head_table' is NULL. |
| Don't free `transformed_buf' in case of error. |
| (woff2_open_font): Don't set `uncompressed_buf' to NULL. |
| |
| 2019-09-29 Werner Lemberg <wl@gnu.org> |
| |
| [woff2] Fix compiler warnings. |
| |
| Problem reported by Alexei. |
| |
| * src/sfnt/sfwoff2.c (reconstruct_glyf): Initialize `x_min'. |
| (reconstruct_font): Initialize `num_hmetrics'. |
| (woff2_open_font): Initialize `info'. |
| |
| 2019-09-28 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Fix sanity check. |
| |
| Correct thinkos in patch from 2019-09-01. |
| |
| 2019-09-28 Werner Lemberg <wl@gnu.org> |
| |
| [woff2] Fix memory leaks. |
| |
| One of them reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=17766 |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Free `info->x_mins' and |
| `woff2->ttc_fonts'. |
| |
| (reconstruct_glyf): Initialize `info->x_mins'. |
| |
| 2019-09-27 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/base/ftstroke.c (ft_stroker_cap): Speed up caps. |
| |
| 2019-09-25 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/base/ftstroke.c (ft_stroker_outside): Speed up clipped miter. |
| * include/freetype/ftstroke.h: Wordsmith miter docs. |
| |
| 2019-09-25 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Check (sum of) table sizes. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=17684 |
| |
| 2019-09-23 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/base/ftstroke.c (ft_stroke_border_arcto): Speed up calculations. |
| |
| 2019-09-20 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Fix memory leaks. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=16896 |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Fix error handling. |
| Free `uncompressed_buf'. |
| (reconstruct_font): Free `transformed_buf'. |
| |
| 2019-09-17 Werner Lemberg <wl@gnu.org> |
| |
| * src/otvalid/otvcommon.c (otv_Coverage_get_last): Guard `count'. |
| |
| Problem reported by Marc Schönefeld <marc.schoenefeld@gmx.org>. |
| |
| 2019-09-17 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Check table index. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=17100 |
| |
| 2019-09-15 Avi Halachmi (:avih) <avihpit@yahoo.com> |
| |
| [cmake] Don't fail if brotli is missing (#56894). |
| |
| The libs which cmake controls are commented out at |
| |
| include/freetype/config/ftoption.h |
| |
| and cmake un-comment each enabled library, but the brotli option was |
| not commented out, therefore `FT_CONFIG_OPTION_USE_BROTLI' remained |
| defined even if brotli was missing/disabled/etc. |
| |
| Comment it such that cmake can control it, which means leaving it |
| undefined if brotli is missing. |
| |
| * include/freetype/config/ftoption.h: Fix typo. |
| |
| 2019-09-05 Werner Lemberg <wl@gnu.org> |
| |
| [cmake] Add brotli support. |
| |
| * CMakeLists.txt (FT_WITH_BROTLI): New option. |
| |
| * builds/cmake/FindBrotliDec.cmake: New file. |
| |
| 2019-09-05 Werner Lemberg <wl@gnu.org> |
| |
| Fix handling of `AF_CONFIG_OPTION_INDIC'. |
| |
| * devel/ftoption.h, include/freetype/config/ftoption.h: |
| `AF_CONFIG_OPTION_INDIC' needs `AF_CONFIG_OPTION_CJK'. |
| |
| 2019-09-05 Werner Lemberg <wl@gnu.org> |
| |
| CMakeLists.txt: Fix generation of DLL related stuff (#56852). |
| |
| Extract `version_info' variable from `builds/unix/configure.raw' and |
| use the data to correctly set `LIBRARY_VERSION' and |
| `LIBRARY_SOVERSION'. |
| |
| Also use the data to set `ft_version' field in `freetype2.pc'. |
| Also fix the needed minimum version of HarfBuzz in `freetype2.pc'. |
| |
| 2019-09-03 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (compute_ULong_sum): Fix undefined shift. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=16933 |
| |
| 2019-09-01 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Add sanity check. |
| |
| Don't trust `totalSfntSize' unconditionally. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=16893 |
| |
| 2019-08-27 Dominik Röttsches <drott@chromium.org> |
| |
| [woff2] Don't use `FT_UInt64' (#56815). |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Use `FT_UInt32' for |
| `file_offset'. This fixes builds on platforms where `FT_LONG64' is |
| not defined while still being sufficient to store a file offset. |
| |
| 2019-08-27 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Prevent crash in `TT_Set_Named_Instance' (#56813). |
| |
| * src/truetype/ttgxvar.c (TT_Set_Named_Instance): Fix error |
| handling. |
| |
| 2019-08-27 Werner Lemberg <wl@gnu.org> |
| |
| [woff2] Fix compiler warnings. |
| |
| * src/sfnt/sfwoff2.c (read_num_hmetrics): Remove unused argument |
| `table_len'. |
| Update caller. |
| (triplet_decode, compute_bbox, store_loca, reconstruct_glyf): Make |
| `i' variable unsigned. |
| (reconstruct_glyph): Remove condition which is always false. |
| (reconstruct_html): Removed unused argument `transformed_size'. |
| Update caller. |
| |
| * src/sfnt/woff2tags.c (woff2_known_tags): Remove condition which is |
| always false. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Check whether known tag is in array bounds. |
| |
| If table tag is not 0x3f, we expect a value between 0 and 62. If |
| this is not the case, exit with errors. |
| |
| * src/sfnt/sfwoff2/c: Check whether table tag makes sense. |
| |
| * src/sfnt/woff2tags.c: Return 0 if tag is out of bounds. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| * src/sfnt/sfwoff2.c: Improve trace comments. |
| |
| Adjust tracing levels for comments, and more formatting. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Support `hmtx' reconstruction when `glyf' is untransformed. |
| |
| `reconstruct_hmtx' requires `info->x_mins' and `info->num_glyphs' to |
| reconstruct the hmtx table. In case glyf is not transformed, we |
| call `get_x_mins' which does the necessary work. |
| |
| * src/sfnt/sfwoff2.c (get_x_mins): New function. |
| (reconstruct_font): Call get_x_mins. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [sfnt] Support `face->num_faces' for WOFF2 fonts. |
| |
| Set correct value of `face->num_faces' for WOFF2 fonts. This is |
| being handled separately because we only load the tables for the |
| requested font face in `woff2_open_font' and create a single-face |
| sfnt stream. |
| |
| The full discussion is at: |
| |
| https://lists.gnu.org/archive/html/freetype-devel/2019-08/msg00000.html |
| |
| * src/sfnt/sfobjs.c (sfnt_open_font): Add parameter |
| `woff2_num_faces'. |
| (sfnt_init_face): Introduce variable `woff2_num_faces', and change |
| `face->root.num_faces' if `woff2_num_faces' is set. |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Validate requested face |
| index and handle negative face indices. |
| |
| * src/sfnt/sfwoff2.h (woff2_open_font): Add parameter `num_faces' to |
| declaration. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Improve memory and error handling. |
| |
| Free up memory after use, and improve error handling. |
| |
| * src/sfnt/sfwoff2.c (reconstruct_font, woff2_open_font): Implement |
| changes. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Avoid too many calls to `FT_REALLOC'. |
| |
| We do this by using `totalSfntSize' as an initial reference, and |
| extending the buffer when required. This reduces rendering time |
| considerably. |
| |
| * include/freetype/internal/wofftypes.h (WOFF2_HeaderRec): Add |
| `totalSfntSize', rename `total_sfnt_size' to `actual_sfnt_size'. |
| |
| * src/sfnt/sfwoff2.c (write_buf): Add parameter `dst_size' to keep |
| track of and update total size of stream. |
| |
| (WRITE_SFNT_BUF, WRITE_SFNT_BUF_AT): Modify macros accordingly. |
| |
| (pad4, store_loca, reconstruct_glyf, reconstruct_hmtx, |
| reconstruct_font): Update parameters to accept `sfnt_size'. |
| |
| (woff2_open_font): Add variable `sfnt_size'. Use WOFF2 header field |
| `totalSfntSize' as initial reference (if value makes sense) and |
| allocate `totalSfntSize' bytes for the sfnt stream. `write_buf' |
| handles reallocation if and when required. Also resize the stream |
| to `actual_sfnt_size' after reconstruction. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Reconstruct `loca', `hmtx', and swap out stream. |
| |
| Add necessary functions to reconstruct loca and hmtx tables (the two |
| remaining tables that can have a transform). `woff2_open_font' is |
| now capable of loading a woff2 font face. This code may still need |
| more refining and better memory management. |
| |
| * include/freetype/internal/wofftypes.h (WOFF2_HeaderRec): Add total |
| (final) size of sfnt stream. |
| |
| (WOFF2_InfoRec): Add header checksum value. |
| |
| * src/sfnt/sfobjs.c (sfnt_open_font): Change `face_instance_index' |
| parameter to its pointer so its value can be modified by |
| `woff2_open_font'. |
| |
| * src/sfnt/sfwoff2.c: (WRITE_SFNT_BUF_AT): New macro to write into |
| sfnt buffer at given position. |
| |
| (write_buf): Add parameter `extend_buf' which allows caller to |
| specify whether buffer should be reallocated before copying data. |
| |
| (WRITE_SFNT_BUF): Updated. |
| |
| (pad4, store_loca, reconstruct_htmx): New functions. |
| |
| (reconstruct_glyf): Calculate loca values and store them. |
| |
| (reconstruct_font): Call `reconstruct_hmtx', write table record |
| entries, and calculate table checksums. Also calculate font |
| checksum and update `checksumAdjustment' entry in head table. |
| |
| (woff2_open_font): Open stream for sfnt buffer, swap out input |
| stream and return. |
| |
| * src/sfnt/sfwoff2.h (woff2_open_font): Modify parameter to accept |
| pointer to `face_index'. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Reconstruct transformed `glyf' table. |
| |
| Reconstruct `glyf' table if it is transformed in the uncompressed |
| table stream. Also add necessary structures, macros and functions. |
| |
| * include/freetype/internal/wofftypes.h (WOFF2_InfoRec, |
| WOFF2_SubstreamRec, WOFF2_PointRec): New structures. |
| (WOFF2_TableRec): s/OrigLength/dst_length/. |
| |
| * src/sfnt/sfwoff2.c (READ_255USHORT, READ_BASE128): Use |
| `FT_SET_ERROR' to set implicit `error' variable. |
| |
| (WRITE_SHORT): New macro. |
| |
| (N_CONTOUR_STREAM, N_POINTS_STREAM, FLAG_STREAM, GLYPH_STREAM, |
| COMPOSITE_STREAM, BBOX_STREAM, INSTRUCTION_STREAM): New macros to |
| refer to substreams of the transformed `glyf' tables. |
| |
| (Read255UShort, ReadBase128): Return errors set by `FT_READ_XXX' |
| macros. |
| |
| (with_sign, safe_int_addition): New functions to add sign to values |
| based on a flag and perform safe addition respectively. |
| |
| (triplet_decode): Decode variable-length (flag, xCoordinate, |
| yCoordinate) triplet for a simple glyph. See |
| |
| https://www.w3.org/TR/WOFF2/#triplet_decoding |
| |
| (store_points, compute_bbox, composteGlyph_size, reconstruct_glyf): |
| New functions. |
| |
| (reconstruct_font): Call `reconstruct_glyf'. |
| |
| * src/sfnt/sfwoff2.h: Add required constants. |
| |
| * src/sfnt/woff2tags.h: Move out constants to `sfwoff2.h'. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Copy un-transformed tables to sfnt stream. |
| |
| Copy un-transformed tables to the sfnt stream. |
| |
| * src/sfnt/sfwoff2.c: (WRITE_SFNT_BUF): New macro. |
| (write_buf): New function. Extend memory of `dst' buffer and copy |
| bytes from `src'. |
| (compute_ULong_sum): New function. Calculate checksum of table. |
| (reconstruct_font): Change `FT_Byte* sfnt' to `FT_Byte** |
| sfnt_bytes'. This has been done because we reallocate memory to |
| `sfnt' multiple times, which may change the pointer value of `sfnt'. |
| This new pointer must be propogated back to the caller. Same reason |
| for using a double pointer in `write_buf'. |
| |
| * src/sfnt/woff2tags.h (WOFF2_DEFAULT_MAX_SIZE): New macro used for |
| overflow checking. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Create stream for uncompressed buffer. |
| |
| Uncompressed buffer is now an `FT_Stream'. |
| |
| Perform basic checks and start iterating over tables. |
| |
| * src/sfnt/sfwoff2.c (stream_close, find_table, read_num_hmetrics): |
| New functions. |
| (reconstruct_font): Modify parameters and iterate over tables. |
| (woff2_open_font): Updated. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Handle TTCs and start reconstructing font. |
| |
| We `handle' TTCs by modifying the `indices' array to point to only |
| those tables that are part of the requested `face_index'. |
| |
| Set and use `num_tables' in `WOFF2_TtcFont'. |
| |
| * src/sfnt/sfwoff2.c (reconstruct_font): New function. |
| (woff2_open_font): Start reconstruction of font. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Get known tags from function. |
| |
| Change `KnownTags' to a function (`woff2_known_tags'). This avoids |
| introducing a global constant array. This function returns the |
| specified index without *any* checks. The caller must ensure that |
| `index' is within array limits. |
| |
| * src/sfnt/sfwoff2.c (woff2_open_font): Change `KnownTags[...]' |
| notation to `woff2_known_tags( ... )'. |
| |
| * src/sfnt/woff2tags.c: Perform changes. |
| |
| * src/sfnt/woff2tags.h: Update definitions. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Minor. |
| |
| * src/sfnt/sfwoff2.c (woff2_uncompress): Add error message |
| (woff2_open_font): Free `uncompressed_buf'. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Uncompress Brotli streams and `face_index' support. |
| |
| WOFF2 compressed stream is now uncompressed if Brotli is available. |
| This data is stored in a separate buffer (uncompressed_buf) because |
| it does not contain direct table data. Certain tables have |
| transformations applied to them, and they must be reconstructed |
| before we can write those tables to the SFNT stream. |
| |
| `face_index' is now being passed as a parameter to |
| `woff2_open_font'. |
| |
| * src/sfnt/sfobjs.c (sfnt_open_font): Add parameter |
| `face_instance_index'. |
| |
| * src/sfnt/sfwoff2.c (woff2_uncompress): New function. |
| (woff2_open_font): Call `woff2_uncompress'. |
| (compute_first_table_offset): Fix return type. |
| |
| * src/sfnt/sfwoff2.h (woff2_open_font): Modify declaration. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| * builds/unix/configure.raw: Change argument name to `brotli'. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| Add Brotli dependency and required checks. |
| |
| Brotli is required for decompressing WOFF2 font directory streams. |
| The library is thus being added as an optional dependency for |
| FreeType. |
| |
| * builds/unix/configure.raw: Add checks for `libbrotlidec'. |
| (REQUIRES_PRIVATE, LIBS_PRIVATE, LIBSSTATIC_CONFIG): Updated. |
| |
| * devel/ftoption.h, include/freetype/config/ftoption.h |
| (FT_CONFIG_OPTION_USE_BROTLI): New macro. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Write SFNT Offset table. |
| |
| * src/sfnt/sfwoff2.c (WRITE_USHORT, WRITE_ULONG): New macros. |
| (compare_tags): New function. |
| (woff2_open_font): Implement it. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| * src/sfnt/sfwoff2.c: #undef macros. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [woff2] Read table and collection directory. |
| |
| * include/freetype/internal/wofftypes.h (WOFF2_TtcFontRec): New |
| structure. |
| (WOFF2_HeaderRec): Add more fields. |
| |
| * src/sfnt/sfwoff2.c (READ_255USHORT, READ_BASE128, ROUND4): New |
| macros. |
| (Read255UShort, CollectionHeaderSize, compute_first_table_offset): |
| New functions. |
| (ReadBase128): Use `FT_READ_BYTE'. |
| (woff2_open_font): Add functionality to read table directory and |
| collection directory (if present). |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [sfnt] Include `woff2tags.c' for building. |
| |
| * src/sfnt/rules.mk (SFNT_DRV_SRC): Add `woff2tags.c'. |
| |
| * src/sfnt/sfnt.c: Include `woff2tags.c'. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [sfnt] Add WOFF2 constants. |
| |
| Add constants required for WOFF2, and known table tags as defined in |
| the specification. See |
| |
| https://www.w3.org/TR/WOFF2/#table_dir_format |
| |
| for details. |
| |
| * src/sfnt/woff2tags.c, src/sfnt/woff2tags.h: New files. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [sfnt] Read WOFF 2 header. |
| |
| Check for WOFF2 tag, call `woff2_open_font', and implement it to read |
| header according to specification. |
| |
| * include/freetype/internal/fttrace.h: Add `sfwoff2.c'. |
| |
| * src/sfnt/rules.mk (SFNT_DRV_SRC): Add `sfwoff2.c'. |
| |
| * src/sfnt/sfnt.c: Include `sfwoff2.c'. |
| |
| * src/sfnt/sfobjs.c (sfnt_open_font): Check for `wOF2' tag and call |
| `woff2_open_font'. |
| |
| * src/sfnt/sfwoff2.c, src/sfnt/sfwoff2.h: New files. |
| |
| 2019-08-27 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| Add structures for WOFF2. |
| |
| Add structures and macro for WOFF 2 header and table directory. |
| |
| * include/freetype/internal/wofftypes.h (WOFF2_HeaderRec, |
| WOFF2_TableRec_): New structures. |
| |
| * include/freetype/tttags.h (TTAG_wOF2): New macro. |
| |
| 2019-08-26 Werner Lemberg <wl@gnu.org> |
| |
| * src/psaux/cffdecode.c (cff_operator_seac): Fix numeric overflow. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=16470 |
| |
| 2019-08-26 Werner Lemberg <wl@gnu.org> |
| |
| [type1] Fix `FT_Get_Var_Axis_Flags' (#56804). |
| |
| * src/type1/t1load.c (T1_Get_MM_Var): Allocate space for axis flags. |
| Also remove redundant assignment. |
| |
| 2019-07-24 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/base/ftbbox.c (cubic_peak): Sanitize left shift (#56586). |
| |
| 2019-07-22 Weiyi Wu <w1w2y3@gmail.com> |
| |
| * src/cid/cidload.c (cid_hex_to_binary): Fix typo (#56653). |
| |
| 2019-07-12 Werner Lemberg <wl@gnu.org> |
| |
| [sfnt, winfonts] Avoid memory leaks in case of error (#56587). |
| |
| * src/sfnt/sfwoff.c (woff_open_font): Call `FT_FRAME_EXIT' in case |
| of error. |
| |
| * src/winfonts/winfnt.c (fnt_face_get_dll_font): Ditto. |
| |
| 2019-07-12 Ben Wagner <bungeman@google.com> |
| |
| Properly handle phantom points for variation fonts (#56601). |
| |
| * src/truetype/ttgload.c (TT_Process_Simple_Glyph): Scale phantom |
| points if HVAR and/or VVAR is present. |
| |
| 2019-07-04 Werner Lemberg <wl@gnu.org> |
| |
| [psaux] (2/2) Handle fonts that use SEAC for ligatures (#56580). |
| |
| The same as previous commit but for the old engine. |
| |
| * src/psaux/t1decode.c (t1operator_seac): Implement it. |
| |
| 2019-07-04 Chris Liddell <chris.liddell@artifex.com> |
| |
| [psaux] (1/2) Handle fonts that use SEAC for ligatures (#56580). |
| |
| As originally intended, a Type 1 SEAC charstring would be used for |
| an accented glyph (like `acaron' or `uumlaut'), where the advance |
| width of the SEAC glyph is the same as that of the `base' glyph |
| (like `a' or `u'). In this case it is not uncommon for the SEAC |
| glyph to not use an (H)SBW opcode of its own but to rely on the |
| value from the base glyph. |
| |
| However, out-of-spec fonts also use SEAC glyphs for ligatures (like |
| `oe' or `fi'), and in those cases the overall advance width is |
| greater than that of the `base' glyph. For this reason we have to |
| allow that the SEAC glyph can have an (H)SBW value of its own, and |
| if it has, retain this value, rather than the one from the base |
| glyph. |
| |
| * src/psaux/psintrp.c (cf2_interpT2CharString) <cf2_escSEAC>: |
| Implement it. |
| |
| 2019-07-01 Werner Lemberg <wl@gnu.org> |
| |
| * Version 2.10.1 released. |
| ========================== |
| |
| |
| Tag sources with `VER-2-10-1'. |
| |
| * docs/VERSION.TXT: Add entry for version 2.10.1. |
| |
| * README, Jamfile (RefDoc), src/base/ftver.rc, |
| builds/windows/vc2010/freetype.vcxproj, |
| builds/windows/vc2010/index.html, |
| builds/windows/visualc/freetype.dsp, |
| builds/windows/visualc/freetype.vcproj, |
| builds/windows/visualc/index.html, |
| builds/windows/visualce/freetype.dsp, |
| builds/windows/visualce/freetype.vcproj, |
| builds/windows/visualce/index.html, |
| builds/wince/vc2005-ce/freetype.vcproj, |
| builds/wince/vc2005-ce/index.html, |
| builds/wince/vc2008-ce/freetype.vcproj, |
| builds/wince/vc2008-ce/index.html: s/2.10.0/2.10.1/, s/2100/2101/. |
| |
| * include/freetype/freetype.h (FREETYPE_PATCH): Set to 1. |
| |
| * builds/unix/configure.raw (version_info): Set to 23:1:17. |
| * CMakeLists.txt (VERSION_PATCH): Set to 1. |
| |
| * include/freetype/fterrors.h (FT_Error_String): Fix C++ compilation. |
| |
| 2019-06-26 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/bdf/bdfdrivr.c (bdf_cmap_char_{index,next}): Fix inequality. |
| |
| Reported by Armin Hasitzka. |
| |
| 2019-06-16 Werner Lemberg <wl@gnu.org> |
| |
| * src/tools/apinames.c: Formatting, minor edits. |
| |
| 2019-06-16 Werner Lemberg <wl@gnu.org> |
| |
| [autofit] Disable hinting if no blue zones are available (#56450). |
| |
| * src/autofit/afglobal.c (af_face_global_get_metrics): Start again |
| (with dummy hinter module) if no blue zones are present. |
| |
| * src/autofit/aflatin.c (af_latin_metrics_init_blues): Change |
| signature to return error code. |
| If no blue zones are found, update `glyph_styles' array to hold |
| AF_STYLE_NONE_DFLT instead of the current style. |
| (af_latin_metrics_init): Return internal error code if no blue zones |
| are found. |
| |
| 2019-06-16 Werner Lemberg <wl@gnu.org> |
| |
| Towards better VMS support. |
| |
| More to come. |
| |
| * builds/vms/LIBS.OPT_IA64, builds/vms/_LINK.OPT_IA64, |
| builds/vms/vmslib.dat: New files provided by Jouk Jansen |
| <joukj@hrem.nano.tudelft.nl>. |
| |
| * builds/vms/ftconfig.h: Update, also from Jouk. |
| |
| 2019-06-13 Werner Lemberg <wl@gnu.org> |
| |
| * src/autofit/aflatin.c (af_latin_metrics_init_widths): Minor. |
| |
| 2019-06-13 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Restore the span buffering for direct mode only. |
| |
| The buffer size FT_MAX_GRAY_SPANS is set to 10 spans, which should be |
| enough to cover the entire scanline for simple glyphs in most cases: |
| each slightly slanted edge needs up to two spans, plus a filling span |
| in-between. This is not new, we used to do it before cb4388783cecc. |
| |
| * src/smooth/ftgrays.c (gray_TWorker): Add `spans' and `num_spans'. |
| (gray_hline, gray_sweep): Implement the span buffering. |
| (gray_raster_render): Use negative `num_spans' to avoid the direct |
| mode. |
| |
| 2019-06-12 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * include/freetype/ftmodapi.h (FT_DebugHook_Func): Return error. |
| |
| Fix a warning by adding a return value as in `TT_RunIns', |
| which should not be a compatibility issue. |
| |
| 2019-06-11 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/truetype/ttobjs.c (tt_check_trickyness_family): Add `const'. |
| |
| 2019-06-11 Moazin Khatti <moazinkhatri@gmail.com> |
| |
| [gzip] Add support for `gzip' encoded header. |
| |
| * src/gzip/ftgzip.c (FT_Gzip_Uncompress): Modify the the call to |
| `inflateInit2' to enable support for `gzip' encoded headers. |
| |
| 2019-06-10 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [type1,type42] Use `const' for string literals. |
| |
| * include/freetype/internal/psaux.h (PS_Table_FuncsRec): Updated. |
| * include/freetype/internal/t1types.h (T1_EncodingRec): Updated. |
| * src/psaux/psobjs.[ch] (ps_table_add): Updated. |
| * src/type1/t1load.c (T1_Open_Face, parse_encoding): Updated. |
| * src/type42/t42objs.c (T42_Open_Face): Updated. |
| * src/type42/t42parse.c (t42_parse_encoding): Updated. |
| |
| * src/cff/cffobjs.c (cff_face_init): Minor. |
| |
| 2019-06-10 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [bdf,pcf] Use `const' for string literals. |
| |
| * src/bdf/bdf.h (bdf_property_t): Updated `name'. |
| * src/bdf/bdflib.c (_bdf_list_split,bdf_create_property, |
| _bdf_add_property,_bdf_ato*): Updated. |
| * src/bdf/bdfdrivr.c (bdf_interpret_style): Updated. |
| * src/pcf/pcfread.c (pcf_intrpret_style): Ditto. |
| |
| 2019-06-07 Philip Race <philip.race@oracle.com> |
| |
| * src/base/ftinit.c (FT_Set_Default_Properties): Fix crash. |
| |
| Terminate loop at end of environment. |
| |
| 2019-05-31 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| Solidify VC2005 builds. |
| |
| * include/freetype/internal/ftcalc.h (FT_MSB) [_MSC_VER]: Explicitly |
| declare `_BitScanReverse' intrinsic. |
| * builds/windows/visualc/freetype.vcproj [Debug]: Disable intrinsics. |
| |
| 2019-05-30 Nikhil Ramakrishnan <ramakrishnan.nikhil@gmail.com> |
| |
| [sfnt] Separate WOFF sources and headers. |
| |
| Move WOFF sources and headers to separate files. |
| |
| * include/freetype/internal/wofftypes.h, src/sfnt/sfwoff.c, |
| src/sfnt/sfwoff.h: New files. |
| |
| * include/freetype/internal/fttrace.h: Register `sfwoff.c'. |
| |
| * include/freetype/internal/internal.h: Define |
| FT_INTERNAL_WOFF_TYPES_H. |
| |
| * include/freetype/internal/sfnt.h: Include FT_INTERNAL_WOFF_TYPES_H. |
| |
| * include/freetype/internal/tttypes.h: Move out WOFF structures. |
| |
| * src/sfnt/rules.mk: Add `sfwoff.c'. |
| |
| * src/sfnt/sfnt.c: Include `sfwoff.c'. |
| |
| * src/sfnt/sfobjs.c: Include `sfwoff.h', move out WOFF sources. |
| |
| 2019-05-30 Werner Lemberg <wl@gnu.org> |
| |
| [base] Fix `make multi'. |
| |
| Reported by Nikhil. |
| |
| * src/base/fterrors.c: Include FT_INTERNAL_DEBUG_H. |
| |
| 2019-05-29 Ben Wagner <bungeman@google.com> |
| |
| [truetype] Fix copy-and-paste error (#56409). |
| |
| * src/truetype/ttgload.c (load_truetype_glyph): Use correct indices |
| into `unrounded' array for phantom points. |
| |
| 2019-05-29 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Fix 32bit builds (#56404). |
| |
| Patch suggested by Ben Wagner <bungeman@google.com>. |
| |
| * src/truetype/ttgxvar.c (FT_fixedToInt, FT_fixedToFdot6): Remove |
| harmful cast to unsigned type. |
| |
| 2019-05-26 Ben Wagner <bungeman@google.com> |
| |
| * src/truetype/ttgload.c (TT_Process_Simple_Glyph): Improve accuracy. |
| |
| 2019-05-23 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Draw glyphs without deltas in variation font (#56374). |
| |
| * src/truetype/ttgxvar.c (TT_Vary_Apply_Glyph_Deltas): Always fill |
| `unrounded' array. |
| |
| 2019-05-21 Werner Lemberg <wl@gnu.org> |
| |
| * src/truetype/ttinterp.c (opcode_name): Improve mnemonics. |
| |
| 2019-05-16 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Actually scale varied CVT values. |
| |
| Up to now, only the unscaled CVT values were varied; in other words, |
| the `CVAR' data was never used for bytecode hinting. |
| |
| * src/truetype/ttgxvar.c (tt_cvt_ready_iterator): New auxiliary |
| function. |
| (tt_face_vary_cvt): Use it to trigger rescaling of CVT values. |
| |
| 2019-05-16 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Use 26.6 format for storing unscaled CVT values. |
| |
| If `CVAR' data is applied to variation fonts, fractional values are |
| possible. |
| |
| * include/freetype/internal/tttypes.h (TT_FaceRec): Change type of |
| `cvt' from `FT_Short' to `FT_Int32'. |
| |
| * src/truetype/ttgxvar.c (FT_fdot6ToFixed): New macro. |
| (tt_face_vary_cvt): Use it to update code to 26.6 format. |
| |
| * src/truetype/ttobjs.c (tt_size_run_prep): Update code to 26.6 |
| format. |
| |
| * src/truetype/ttpload.c (tt_face_load_cvt): Stora data in 26.6 |
| format. |
| |
| 2019-05-16 Werner Lemberg <wl@gnu.org> |
| |
| * src/truetype/ttgload.c (load_truetype_glyph): Init `unrounded'. |
| |
| This fixes linear advance width values for spacing glyphs. Bug |
| introduced 2019-05-09. |
| |
| 2019-05-16 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Avoid code duplication. |
| |
| * src/truetype/ttobjs.c (tt_size_run_prep): Scale CVT values in this |
| function. |
| (tt_size_ready_bytecode): Updated. |
| * src/truetype/ttgload.c (tt_loader_init): Updated. |
| |
| 2019-05-13 Jouk Jansen <joukj@hrem.nano.tudelft.nl> |
| |
| * vms_make.com: Updated. Handle `bzip2' directory, too. |
| |
| 2019-05-13 Werner Lemberg <wl@gnu.org> |
| |
| * src/psaux/psfont.c (cf2_font_setup): Fix compiler warning. |
| |
| 2019-05-12 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Doh. Fix last commit to make it work. |
| |
| Very embarassing :-) |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14701 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14705 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=14710 |
| |
| * src/truetype/ttgload.c (IS_DEFAULT_INSTANCE): Move up and add |
| argument; update all callers. |
| (TT_Process_Simple_Glyph): Use it. The `unrounded' array is active |
| for variation fonts only, thus also enclose related code with |
| `#ifdef TT_CONFIG_OPTION_GX_VAR_SUPPORT ... #endif' where |
| necessary. |
| Revert commit a113e5d from 2019-05-09, and don't use `extra_points2' |
| but allocate a temporary array. |
| Speed up the scaling of the `unrounded' array. |
| |
| * src/truetype/ttgxvar.c (FT_fixedToInt, FT_FixedToFdot6): Fix type |
| conversions and rounding. The unsigned type must have more or equal |
| bits to the signed type. |
| |
| 2019-05-09 Werner Lemberg <wl@gnu.org> |
| |
| [truetype] Increase precision of font variation (#54371). |
| |
| This patch makes FreeType use font units in 26.6 format internally |
| instead of integers. |
| |
| * src/truetype/ttgxvar.c (FT_fixedToFdot6): New macro. |
| (TT_Vary_Apply_Glyph_Deltas): Add argument to output unrounded font |
| coordinates. |
| * src/truetype/ttgxvar.h: Updated. |
| |
| * src/truetype/ttgload.c (TT_Process_Simple_Glyph): Use |
| `extra_points2' array to temporarily hold unrounded point |
| coordinates; use them to compute scaled coordinates and linear |
| advance width and height. |
| (load_truetype_code): Adjust similarly. |
| |
| 2019-05-09 Werner Lemberg <wl@gnu.org> |
| |
| * src/truetype/ttgload.c (TT_Process_Simple_Glyph): Minor. |
| |
| 2019-05-08 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Faster fractions. |
| |
| * src/smooth/ftgrays.c (SUBPIXELS): Replace with... |
| (FRACT): A fractional coordinate macro to use in... |
| (gray_render_line, gray_render_scanline): ... here. |
| |
| 2019-05-07 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/raster/ftraster.c (Draw_Sweep): Unbreak. |
| |
| 2019-05-05 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/raster/ftraster.c: Clean-ups. |
| |
| 2019-05-05 Werner Lemberg <wl@gnu.org> |
| |
| * src/truetype/ttgxvar.c: More use of `FT_fdot14ToFixed'. |
| |
| 2019-05-04 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/smooth/ftgrays.c (gray_render_line): Small shortcut. |
| |
| 2019-05-04 Werner Lemberg <wl@gnu.org> |
| |
| Various clang 8.0 static analyzer fixes. |
| |
| Reported by Sender Ghost <lightside@gmx.com>. |
| |
| * src/autofit/afcjk.c (af_cjk_hints_compute_edges): Catch a corner |
| case where `edge->first' could be NULL. |
| |
| * src/pfr/pfrobjs.c (pfr_slot_load): Remove unnecessary test of |
| `size'. |
| |
| * src/raster/ftraster.c (Draw_Sweep): Catch a corner case where |
| `draw_right' might be NULL. |
| |
| * src/sfnt/ttmtx.c (tt_face_get_metrics): Fix limit test for |
| `aadvance'. |
| Ensure `abearing' always hold a meaningful result. |
| |
| * src/truetype/ttgload.c (load_truetype_glyph): Ensure `subglyph' is |
| not NULL before accessing it. |
| * src/truetype/ttgxvar.c (TT_Set_Named_Instance): Remove unnecessary |
| test of `namedstyle'. |
| |
| * src/type42/t42parse.c (t42_parser_done): Ensure |
| `parser->root.funcs.done' is not NULL before accessing it. |
| |
| 2019-05-03 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| Miscellaneous macro updates. |
| |
| * src/base/ftoutln.c (SCALED): Updated. |
| * src/smooth/ftgrays.c (SCALED): Ditto. |
| (FLOOR, ROUND, CEILING): Removed. |
| * src/psaux/psfixed.h (cf2_fracToFixed): Updated. |
| |
| 2019-05-02 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| Tweak LCD filtering. |
| |
| * src/base/ftlcdfil.c (ft_lcd_filter_fir, _ft_lcd_filter_legacy): |
| Choose direction from bitmap's pixel_mode. |
| * include/freetype/internal/ftobjs.c (FT_Bitmap_LcdFilterFunc): |
| Updated. |
| * src/smooth/ftsmooth.c (ft_smooth_render_generic): Updated. |
| |
| 2019-05-02 Werner Lemberg <wl@gnu.org> |
| |
| * vms_make.com: Updated (#56253). |
| |
| Remove no longer existing directories (`autohint', `otlayout'). |
| Update used base extensions. |
| Activate `autofit' module. |
| Add `gxvalid' module. |
| Update copyright notices. |
| |
| 2019-04-29 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Simplify cubic Bézier flattening. |
| |
| The previous implementation is correct but it is too complex. |
| The revised algorithm is based on the fact that each split moves |
| the control points closer to the trisection points on the chord. |
| The corresponding distances are good surrogates for the curve |
| deviation from the straight line. |
| |
| This cubic flattening algorithm is somewhat similar to the conic |
| algorithm based the distance from the control point to the middle of |
| the chord. The cubic distances, however, decrease less predictably |
| but are easy enough to calculate on each step. |
| |
| The new algorithm produces slightly larger number of splits, which is |
| compensated by its simplicity. The overall rendering performance is |
| improved by 1-2%. The larger number of splits does not necessarily |
| result in higher quality, which stays comparable. |
| |
| * src/smooth/ftgrays.c (gray_render_cubic): Replace the split |
| condition. |
| |
| 2019-04-26 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Bithacks and cosmetics. |
| |
| * src/smooth/ftgrays.c (gray_record_cell, gray_set_cell, gray_hline, |
| gray_render_conic, gray_convert_glyph_inner): Updated. |
| |
| 2019-04-25 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| Optimize Bézier bisections. |
| |
| This change makes bisections faster by 20-30%. When inlined into |
| `gray_render_cubic', this makes the function faster by 10% and is |
| noticeable in the overall rendering performance. |
| |
| * src/raster/ftraster.c (Split_Conic, Split_Cubic): Use shifts and |
| refactor. |
| * src/smooth/ftgrays.c (gray_split_conic, gray_split_cubic): Ditto. |
| * src/base/ftstroke.c (ft_conic_split, ft_cubic_split): Ditto. |
| * src/base/ftbbox.c (cubic_peak): Use shifts. |
| |
| 2019-04-23 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/ttcmap.c (tt_cmap12_next): Remove dead code. |
| |
| Found by clang 8.0's static analyzer and reported by Sender Ghost |
| <lightside@gmx.com>. |
| |
| 2019-04-23 Werner Lemberg <wl@gnu.org> |
| |
| [base] Fix thinko in previous commit. |
| |
| * src/base/ftbitmap.c (FT_Bitmap_Blend): Check final width, not |
| target pitch. |
| |
| Problem reported by Sender Ghost <lightside@gmx.com>. |
| |
| 2019-04-22 Werner Lemberg <wl@gnu.org> |
| |
| * src/base/ftbitmap.c (FT_Bitmap_Blend): Check target pitch. |
| |
| Problem reported by Sender Ghost <lightside@gmx.com>. |
| |
| 2019-04-22 Werner Lemberg <wl@gnu.org> |
| |
| Fix return value of `FT_Set_Named_Instance' (#56186). |
| |
| * src/truetype/ttgxvar.c (TT_Set_Named_Instance): Correctly handle |
| internal return value -1 of `TT_Set_Var_Design'. |
| |
| 2019-04-18 Werner Lemberg <wl@gnu.org> |
| |
| [pcf] Fix handling of undefined glyph (#56067). |
| |
| This commit fixes the changes from 2018-07-21, which broke charmap |
| iteration. We now add the default character as a new glyph with |
| index 0, thus increasing the number of glyphs by one (as before). |
| |
| * src/pcf/pcfread.c (pcf_get_metrics): Adjust to new artificial |
| glyph with index 0. |
| Limit number of elements to 65534. |
| (pcf_get_bitmaps): Ditto. |
| Unify two loops into one; this avoids allocation of an intermediate |
| array. |
| (pcf_get_encodings): Don't flip indices but copy glyph metrics of |
| default character to index 0. |
| Also handle invalid default character. |
| |
| * docs/CHANGES: Updated. |
| |
| 2019-04-15 Minmin Gong <gongminmin@msn.com> |
| |
| * CMakeLists.txt: Avoid rewriting of unchanged configuration files. |
| |
| Reported as |
| |
| https://savannah.nongnu.org/patch/index.php?9755 |
| |
| 2019-04-15 JDG <JonathanG@iQmetrix.com> |
| |
| * src/tools/apinames.c (main): Fix error message. |
| |
| Reported as |
| |
| https://savannah.nongnu.org/patch/?9796 |
| |
| 2019-04-11 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Fix segfault in direct mode (#56092). |
| |
| * src/base/ftoutln.c (FT_Outline_Render): Set missing clip_box for |
| direct mode. |
| * src/smooth/ftgrays.c (gray_raster_render): Use it. |
| |
| 2019-04-06 Werner Lemberg <wl@gnu.org> |
| |
| * src/sfnt/ttcmap.c (tt_get_glyph_name): Pacify compiler (#56061). |
| |
| This is for Visual Studio 2019 on ARM. |
| |
| 2019-04-06 Werner Lemberg <wl@gnu.org> |
| |
| For distribution, replace `.tar.bz2' with `.tar.xz' bundles. |
| |
| * builds/toplevel.mk (build): Do it. |
| |
| * README, docs/CHANGES, docs/release: Updated. |
| |
| 2019-04-06 Antony Lee <anntzer.lee@gmail.com> |
| |
| Make `glyph_name' parameter to `FT_Get_Name_Index' a `const'. |
| |
| * include/freetype/freetype.h (FT_Get_Name_Index), |
| include/freetype/internal/ftobjs.h (FT_Face_GetGlyphNameIndexFunc), |
| include/freetype/internal/services/svgldict.h |
| (FT_GlyphDict_NameIndexFunc), src/base/ftobjs.c (FT_Get_Name_Index), |
| src/cff/cffdrivr.c (cff_get_name_index), src/sfnt/sfdriver.c |
| (sfnt_get_name_index), src/type1/t1driver.c (t1_get_name_index), |
| src/type42/t42drivr.c (t42_get_name_index): Add `const' to second |
| argument. |
| |
| 2019-03-31 Armin Hasitzka <prince.cherusker@gmail.com> |
| |
| [cff] Fix boundary checks. |
| |
| 642bc7590c701c8cd35a9f60fa899cfa518b17ff introduced dynamically |
| allocated memory when parsing CFF files with the "old" engine. Bounds |
| checks have never been updated, however, leading to pointless |
| comparisons of pointers in some cases. This commit presents a |
| solution for bounds checks in the CFF module with an extended logic |
| for the "old" engine while staying as concise as possible for the |
| "new" one. |
| |
| * src/cff/cffparse.h: Introduce the struct `CFF_T2_StringRec' and |
| the additional field `t2_strings' within `CFF_ParserRec'. |
| |
| * src/cff/cffparse.c (cff_parser_within_limits): Move all boundary |
| checks into this new function and update the rest of `cffparse.c' to |
| use it. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=12137 |
| |
| 2019-03-20 Werner Lemberg <wl@gnu.org> |
| |
| [autofit] Fix Mongolian blue zone characters. |
| |
| * src/autofit/afblue.dat: Use U+200D (ZERO-WIDTH JOINER) characters |
| to get medial forms for some Mongolian characters. |
| * src/autofit/afblue.c, src/autofit/afblue.h: Regenerated. |
| |
| 2019-03-19 Werner Lemberg <wl@gnu.org> |
| |
| [autofit] Add support for Mongolian script. |
| |
| As a de-facto standard, layouts using this script are constructed |
| horizontally line by line, then the lines are rotated clockwise for |
| vertical display. |
| |
| * src/autofit/afblue.dat: Add blue zone data for Mongolian. |
| * src/autofit/afblue.c, src/autofit/afblue.h: Regenerated. |
| |
| * src/autofit/afscript.h: Add Mongolian standard characters. |
| |
| * src/autofit/afranges.c, src/autofit/afstyles.h: Add Mongolian |
| data. |
| |
| 2019-03-15 Werner Lemberg <wl@gnu.org> |
| |
| * Version 2.10.0 released. |
| ========================== |
| |
| |
| Tag sources with `VER-2-10-0'. |
| |
| * docs/VERSION.TXT: Add entry for version 2.10.0. |
| * docs/CHANGES: Updated. |
| |
| * README, Jamfile (RefDoc), src/base/ftver.rc, |
| builds/windows/vc2010/freetype.vcxproj, |
| builds/windows/vc2010/index.html, |
| builds/windows/visualc/freetype.dsp, |
| builds/windows/visualc/freetype.vcproj, |
| builds/windows/visualc/index.html, |
| builds/windows/visualce/freetype.dsp, |
| builds/windows/visualce/freetype.vcproj, |
| builds/windows/visualce/index.html, |
| builds/wince/vc2005-ce/freetype.vcproj, |
| builds/wince/vc2005-ce/index.html, |
| builds/wince/vc2008-ce/freetype.vcproj, |
| builds/wince/vc2008-ce/index.html: s/2.9.1/2.10.0/, s/291/2100/. |
| |
| * include/freetype/freetype.h (FREETYPE_MINOR): Set to 10. |
| (FREETYPE_PATCH): Set to 0. |
| |
| * builds/unix/configure.raw (version_info): Set to 23:0:17. |
| * CMakeLists.txt (VERSION_MINOR): Set to 10. |
| (VERSION_PATCH): Set to 0. |
| |
| * builds/toplevel.mk (version, winversion): Since the minor version |
| number has two digits now, never omit the patch number. We would |
| get ambiguous zip file names otherwise. |
| (dist): Remove remnants of `docmaker' tool. |
| (do-dist): Remove unused intermediate files. |
| |
| * src/cff/cffparse.c (destrict_c2s_item): Guard function with |
| CFF_CONFIG_OPTION_OLD_ENGINE macro. |
| |
| 2019-03-07 Andrei Alexeyev <0x416b617269@gmail.com> |
| Werner Lemberg <wl@gnu.org> |
| |
| Fix invalid function pointer casts. |
| |
| This change should allow Freetype to work on WASM/Emscripten without |
| needing `-s EMULATE_FUNCTION_POINTER_CASTS=1'. |
| |
| * src/autofit/afdummy.c (af_dummy_hints_apply): Fix signature. |
| |
| * src/cid/cidload.c (cid_parse_font_matrix, parse_fd_array, |
| parse_expansion_factor, parse_font_name): Return `void', not |
| `FT_Error'. |
| |
| * include/freetype/internal/ftobjs.h (FT_CMap_CharVarIsDefaultFunc): |
| Fix signature. |
| |
| 2019-03-05 Werner Lemberg <wl@gnu.org> |
| |
| [base] Handle numeric overflow (#55827). |
| |
| * src/base/ftglyph.c (FT_Glyph_Get_CBox): Use `FT_PIX_CEIL_LONG'. |
| |
| 2019-03-05 Sebastian Rasmussen <sebras@gmail.com> |
| |
| [psaux] Fix use of uninitialized memory (#55832). |
| |
| * src/psaux/psintrp.c (cf2_interpT2CharString): The call to |
| `cf2_arrstack_setCount' may fail because the allocator ran out of |
| memory. When this happens the stack is still written to before the |
| error condition is checked. This means that FreeType writes outside |
| of allocated memory. This commit moves the error check prior to the |
| stack assignment, hence the function now properly returns with an |
| error condition. |
| |
| 2019-02-23 Werner Lemberg <wl@gnu.org> |
| |
| * src/base/ftbitmap.c (FT_Bitmap_Blend): No fractional offsets. |
| |
| The function only provided a framework without an actual |
| implementation, which this commit removes. |
| |
| 2019-02-23 Werner Lemberg <wl@gnu.org> |
| |
| * src/tools/update-copyright-year: Insert `(C)'. |
| |
| 2019-02-21 Armin Hasitzka <prince.cherusker@gmail.com> |
| |
| [truetype] Mask numeric overflows. |
| |
| * src/truetype/ttinterp.c (Move_CVT, Move_CVT_Stretched, Ins_MIRP): |
| Mask numeric overflows. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11681 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11734 |
| |
| 2019-02-21 Armin Hasitzka <prince.cherusker@gmail.com> |
| |
| [psaux] Mask numeric overflow. |
| |
| * src/psaux/cffdecode.c (cff_decoder_parse_charstrings): Mask numeric |
| overflow. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=13041 |
| |
| 2019-02-16 Wink Saville <wink@saville.com> |
| |
| * src/autofit/afwarp.h (af_warper_compute): Fix declaration. |
| |
| 2019-02-02 Nikolaus Waxweiler <madigens@gmail.com> |
| |
| [truetype] Apply MVAR hasc, hdsc and hlgp metrics to current FT_Face metrics. |
| |
| Instead of setting typo or win metrics as the new `FT_Face' metrics |
| indiscriminately, apply only typo deltas to the currently active |
| `FT_Face' metrics. This prevents line height differences when the |
| default outlines were used as the regular face and instances for |
| everything else, for example. |
| |
| * src/truetype/ttgxvar.c (tt_apply_mvar): Implement. |
| |
| 2019-02-02 Nikolaus Waxweiler <madigens@gmail.com> |
| |
| [sfnt] Use typo metrics if OS/2 fsSelection USE_TYPO_METRICS bit is set. |
| |
| If the `OS/2' table exists and `fsSelection' bit 7 |
| (USE_TYPO_METRICS) is set, use the `sTypo*' set of values to compute |
| the `FT_Face's ascender, descender, and height. Otherwise, fall |
| back to old behavior. |
| |
| * src/sfnt/sfobjs.c (sfnt_load_face): Implement. |
| |
| 2019-01-18 John Tytgat <John.Tytgat@esko.com> |
| |
| [sfnt] Handle TT fonts having two PostScript font names (#55471). |
| |
| * src/sfnt/sfdriver.c (sfnt_get_name_id): Prefer English over any |
| other language found for PostScript font names. |
| |
| 2019-01-08 Chris Liddell <chris.liddell@artifex.com> |
| |
| [psaux] Fix closepath (#55414). |
| |
| All of the Type 1 path building is done with code common to the |
| revised CFF engine, with the exception of closepath, which was still |
| calling ps_builder_close_contour(), thus previously cached segments |
| were not always written to the path, and glyph corruption, or even |
| invalid outlines were possible. |
| |
| * src/psauc/psinterp.c (cf2_interpT2CharString) <cf2_cmdCLOSEPATH>: |
| Switch to calling `cf2_glyphpath_closeOpenPath'. |
| |
| 2018-12-29 Werner Lemberg <wl@gnu.org> |
| |
| * src/autofit/aflatin2.c: Some fixes from `aflatin.c' (#55310). |
| |
| 2018-12-25 Werner Lemberg <wl@gnu.org> |
| |
| * src/psaux/cffdecode.c (cff_operaor_seac): Fix numeric overflow. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11915 |
| |
| 2018-12-12 Werner Lemberg <wl@gnu.org> |
| |
| [gxvalid] Fix compiler warnings. |
| |
| * src/gxvalid/gxvjust.c (gxv_just_check_max_gid), |
| src/gxvalid/gxvmort.c (gxv_mort_coverage_validate): Use `FT_UNUSED'. |
| |
| 2018-12-11 Werner Lemberg <wl@gnu.org> |
| |
| * src/truetype/ttgload.c (TT_Hint_Glyph): Remove useless test. |
| |
| `control_len' only gets its value from `n_ins' (and vice versa), |
| which is always read as `unsigned short' and thus can't be larger |
| than 0xFFFF. |
| |
| 2018-12-04 Werner Lemberg <wl@gnu.org> |
| |
| [bdf] Ignore data after `ENDFONT'. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10798 |
| |
| * src/bdf/bdflib.c (_bdf_parse_end): New function. |
| (_bdf_parse_glyphs): Switch to `_bdf_parse_end' after `ENDFONT' has |
| been encountered. |
| |
| 2018-12-02 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * builds/windows/visualc/freetype.dsp: Dust off. |
| |
| 2018-11-27 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * builds/windows/vc2010/freetype.vcxproj: Simplify. |
| |
| 2018-11-27 Chris Liddell <chris.liddell@artifex.com> |
| |
| [type1,cff] Add FT_{Set,Get}_MM_WeightVector API calls. |
| |
| For multiple master fonts, common usage (in Postscript) is to modify |
| the WeightVector of an existing font instance, this addition |
| supports that use. |
| |
| * include/freetype/ftmm.h, src/base/ftmm.c (FT_Set_MM_WeightVector, |
| FT_Get_MM_WeightVector): New API functions. |
| |
| * include/freetype/internalservices/svmm.h |
| (FT_Set_MM_WeightVector_Func, FT_Get_MM_WeightVector_Func): New |
| function types. |
| (MultiMasters): Add `set_mm_weightvector' and `get_mm_weightvector' |
| members. |
| (FT_DEFINE_SERVICE_MULTIMASTERSREC): Updated. |
| |
| * src/cffcffdrivr.c (cff_set_mm_weightvector, |
| cff_get_mm_weightvector): New functions. |
| (cff_service_multi_masters): Register them. |
| |
| * src/truetype/ttdriver.c (tt_service_gx_multi_masters): Updated. |
| This driver doesn't use the new interface. |
| |
| * src/type1/t1load.c (T1_Set_MM_WeightVector, |
| T1_Get_MM_WeightVector): New functions. |
| * src/type1/t1driver.c (t1_service_multi_masters): Register them. |
| * src/type1/t1load.h: Updated. |
| |
| 2018-11-27 Ben Wagner <bungeman@google.com> |
| |
| [cff] Fix compiler warning (#55105). |
| |
| * src/cff/cffparse.c (cff_parser_run): Guard label only used if |
| CFF_CONFIG_OPTION_OLD_ENGINE is active. |
| |
| 2018-11-27 Ben Wagner <bungeman@google.com> |
| |
| [truetype] Fix numeric overflow (#55103). |
| |
| * src/truetype/ttgload.c (compute_glyph_metrics): Use `SUB_LONG'. |
| |
| 2018-11-25 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [builds] Belated DLL support with vc2002-vc2008. |
| |
| The solution and project files should be automatically upgraded for |
| the approriate Visual C++ version. |
| |
| * builds/windows/visualc/freetype.{sln,vcproj}: Major upgrades. |
| * builds/windows/visualc/index.html: Document the change. |
| * builds/windows/vc2005, builds/windows/vc2008: Removed as redundant. |
| |
| 2018-11-22 Armin Hasitzka <prince.cherusker@gmail.com> |
| |
| * src/cff/cffparse.c: Please the compiler. |
| |
| 2018-11-22 Armin Hasitzka <prince.cherusker@gmail.com> |
| |
| [cff] Fix memory overflow. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=9869 |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10869 |
| |
| * src/cff/cffparse.c (destruct_t2s_item, cff_parser_run): Store |
| evaluated T2 charstrings in separately allocated memory. |
| |
| 2018-11-18 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * builds/windows/{visualc,vc2005,vc2008}/freetype.vcproj: Fix it. |
| |
| 2018-11-10 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [smooth] Placeholder only for library-enabled LCD filtering. |
| |
| * src/smooth/ftsmooth.c (ft_smooth_init): Add disabled |
| `FT_Library_SetLcdFilter' call. |
| |
| 2018-11-09 Young Xiao <yangx92@hotmail.com> |
| |
| [psaux] Add safety guard (#54985). |
| |
| * src/psaux/psobjs.c (cff_builder_close_contour): Do it. |
| |
| 2018-11-08 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * builds/unix/configure.raw: Require `windows.h' for windres. |
| |
| 2018-11-08 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [ftstroke] Fix unpredictable failures (#54986). |
| |
| * src/base/ftstroke.c (ft_sroke_border_lineto): Fix lineto check. |
| |
| 2018-11-08 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [ftstroke] Fix unpredictable failures (#54976). |
| |
| * src/base/ftstroke.c (ft_sroke_border_close): Set the start tags. |
| |
| 2018-11-07 Ben Wagner <bungeman@google.com> |
| |
| [truetype] Fix VF check from 2018-09-12 (#54973). |
| |
| * src/truetype/ttgxvar.c (TT_Vary_Apply_Glyph_Deltas): Use correct |
| offsets for estimates. |
| |
| 2018-11-06 Werner Lemberg <wl@gnu.org> |
| |
| [pshinter] Fix numeric overflow. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11242 |
| |
| * src/pshinter/pshrec.c (ps_dimension_add_t1stem): Implement it. |
| |
| 2018-11-06 Werner Lemberg <wl@gnu.org> |
| |
| [psaux] Fix timeout in old CFF engine. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11260 |
| |
| * src/psaux/cffdecode.c (cff_decoder_parse_charstrings) |
| <cff_op_sqrt> [CFF_CONFIG_OPTION_OLD_ENGINE]: Fix potential endless |
| loop. |
| |
| 2018-11-04 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/truetype/ttgxvar.c: Use enum definitions. |
| |
| 2018-11-03 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/truetype/ttgxvar.c (ft_var_apply_tuple): Adjust condition. |
| |
| 2018-11-03 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/truetype/ttgxvar.c (ft_var_apply_tuple): Tracing tweaks. |
| |
| 2018-11-03 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| Revert due to specs: [truetype] Speed up variation IUP. |
| |
| 2018-11-02 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/truetype/ttgxvar.c (ft_var_get_item_delta): Fixed logic. |
| |
| Reported and tested by Behdad. |
| |
| 2018-11-02 Shailesh Mistry <shailesh.mistry@hotmail.co.uk> |
| |
| [autofit] Prevent SEGV. |
| |
| See |
| |
| https://bugs.ghostscript.com/show_bug.cgi?id=697545 |
| |
| for more details on how the bug was found. |
| |
| * src/autofit/afloader.c (af_loader_load_glyph): Propagate error |
| code. |
| |
| 2018-10-31 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [truetype] Speed up variation IUP. |
| |
| * src/truetype/ttgxvar.c (tt_delta_interpolate): Separate trivial |
| snapping to the same position from true interpolation. |
| |
| 2018-10-31 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/type1/t1load.c (t1_set_mm_blend): Optimized. |
| |
| 2018-10-31 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| * src/truetype/ttgxvar.c (ft_var_get_item_delta): Optimized. |
| |
| 2018-10-29 Werner Lemberg <wl@gnu.org> |
| |
| [base] Fix numeric overflow. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11080 |
| |
| * src/base/ftoutln.c (FT_Outline_Get_Orientation): Use `MUL_LONG'. |
| |
| 2018-10-29 Werner Lemberg <wl@gnu.org> |
| |
| [cff] Fix numeric overflow. |
| |
| Reported as |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=10988 |
| |
| * src/cff/cffparse.c (cff_parser_run) |
| [CFF_CONFIG_OPTION_OLD_ENGINE]: Use `NEG_LONG'. |
| |
| 2018-10-27 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| [sfnt] Make `head' timestamps unsigned. |
| |
| It's been more than 2^31 seconds since 1904. |
| |
| * include/freetype/tttables.h (TT_Header): Change field types. |
| * src/sfnt/ttload.c (tt_face_load_generic_header): Updated. |
| |
| 2018-10-27 Alexei Podtelezhnikov <apodtele@gmail.com> |
| |
| Revert: Align FreeType with standard C memory management. |
| |
| 2018-10-27 Werner Lemberg <wl@gnu.org> |
| |
| [psaux] Fix numeric overflow. |
| |
| Triggered by |
| |
| https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=11157 |
| |
| * src/psaux/cffdecode.c (cff_decoder_parse_charstrings) <cff_op_blend> |
| [CFF_CONFIG_OPTION_OLD_ENGINE]: Fix integer overflow. |
|