blob: 7cb958a46627512e792ff202329b6d20965d5b85 [file] [log] [blame]
# Copyright 1999-2016 Gentoo Foundation
# Distributed under the terms of the GNU General Public License v2
# $Id$
EAPI="6"
inherit toolchain-funcs eutils systemd
DESCRIPTION="IEEE 802.11 wireless LAN Host AP daemon"
HOMEPAGE="http://hostap.epitest.fi"
SRC_URI="http://hostap.epitest.fi/releases/${P}.tar.gz"
LICENSE="|| ( GPL-2 BSD )"
SLOT="0"
KEYWORDS="amd64 ~arm ~mips ~ppc x86"
IUSE="ipv6 logwatch netlink sqlite +ssl +wps +crda"
DEPEND="ssl? ( dev-libs/openssl:*[-bindist] )
kernel_linux? (
dev-libs/libnl:3
crda? ( net-wireless/crda )
)
netlink? ( net-libs/libnfnetlink )
sqlite? ( >=dev-db/sqlite-3 )"
RDEPEND="${DEPEND}"
S="${S}/${PN}"
src_prepare() {
default
sed -i -e "s:/etc/hostapd:/etc/hostapd/hostapd:g" \
"${S}/hostapd.conf" || die
}
src_configure() {
local CONFIG="${S}/.config"
# toolchain setup
echo "CC = $(tc-getCC)" > ${CONFIG}
# EAP authentication methods
echo "CONFIG_EAP=y" >> ${CONFIG}
echo "CONFIG_ERP=y" >> ${CONFIG}
echo "CONFIG_EAP_MD5=y" >> ${CONFIG}
if use ssl; then
# SSL authentication methods
echo "CONFIG_EAP_FAST=y" >> ${CONFIG}
echo "CONFIG_EAP_TLS=y" >> ${CONFIG}
echo "CONFIG_EAP_TTLS=y" >> ${CONFIG}
echo "CONFIG_EAP_MSCHAPV2=y" >> ${CONFIG}
echo "CONFIG_EAP_PEAP=y" >> ${CONFIG}
echo "CONFIG_TLSV11=y" >> ${CONFIG}
echo "CONFIG_TLSV12=y" >> ${CONFIG}
fi
if use wps; then
# Enable Wi-Fi Protected Setup
echo "CONFIG_WPS=y" >> ${CONFIG}
echo "CONFIG_WPS2=y" >> ${CONFIG}
echo "CONFIG_WPS_UPNP=y" >> ${CONFIG}
echo "CONFIG_WPS_NFC=y" >> ${CONFIG}
einfo "Enabling Wi-Fi Protected Setup support"
fi
echo "CONFIG_EAP_IKEV2=y" >> ${CONFIG}
echo "CONFIG_EAP_TNC=y" >> ${CONFIG}
echo "CONFIG_EAP_GTC=y" >> ${CONFIG}
echo "CONFIG_EAP_SIM=y" >> ${CONFIG}
echo "CONFIG_EAP_AKA=y" >> ${CONFIG}
echo "CONFIG_EAP_AKA_PRIME=y" >> ${CONFIG}
echo "CONFIG_EAP_EKE=y" >> ${CONFIG}
echo "CONFIG_EAP_PAX=y" >> ${CONFIG}
echo "CONFIG_EAP_PSK=y" >> ${CONFIG}
echo "CONFIG_EAP_SAKE=y" >> ${CONFIG}
echo "CONFIG_EAP_GPSK=y" >> ${CONFIG}
echo "CONFIG_EAP_GPSK_SHA256=y" >> ${CONFIG}
echo "CONFIG_EAP_PWD=y" >> ${CONFIG}
einfo "Enabling drivers: "
# drivers
echo "CONFIG_DRIVER_HOSTAP=y" >> ${CONFIG}
einfo " HostAP driver enabled"
echo "CONFIG_DRIVER_WIRED=y" >> ${CONFIG}
einfo " Wired driver enabled"
echo "CONFIG_DRIVER_PRISM54=y" >> ${CONFIG}
einfo " Prism54 driver enabled"
echo "CONFIG_DRIVER_NONE=y" >> ${CONFIG}
einfo " None driver enabled"
einfo " nl80211 driver enabled"
echo "CONFIG_DRIVER_NL80211=y" >> ${CONFIG}
# epoll
echo "CONFIG_ELOOP_EPOLL=y" >> ${CONFIG}
# misc
echo "CONFIG_DEBUG_FILE=y" >> ${CONFIG}
echo "CONFIG_PKCS12=y" >> ${CONFIG}
echo "CONFIG_RADIUS_SERVER=y" >> ${CONFIG}
echo "CONFIG_IAPP=y" >> ${CONFIG}
echo "CONFIG_IEEE80211R=y" >> ${CONFIG}
echo "CONFIG_IEEE80211W=y" >> ${CONFIG}
echo "CONFIG_IEEE80211N=y" >> ${CONFIG}
echo "CONFIG_IEEE80211AC=y" >> ${CONFIG}
echo "CONFIG_PEERKEY=y" >> ${CONFIG}
echo "CONFIG_RSN_PREAUTH=y" >> ${CONFIG}
echo "CONFIG_INTERWORKING=y" >> ${CONFIG}
echo "CONFIG_FULL_DYNAMIC_VLAN=y" >> ${CONFIG}
echo "CONFIG_HS20=y" >> ${CONFIG}
echo "CONFIG_WNM=y" >> ${CONFIG}
echo "CONFIG_FST=y" >> ${CONFIG}
echo "CONFIG_FST_TEST=y" >> ${CONFIG}
echo "CONFIG_ACS=y" >> ${CONFIG}
if use netlink; then
# Netlink support
echo "CONFIG_VLAN_NETLINK=y" >> ${CONFIG}
fi
if use ipv6; then
# IPv6 support
echo "CONFIG_IPV6=y" >> ${CONFIG}
fi
if use sqlite; then
# Sqlite support
echo "CONFIG_SQLITE=y" >> ${CONFIG}
fi
# If we are using libnl 2.0 and above, enable support for it
# Removed for now, since the 3.2 version is broken, and we don't
# support it.
if has_version ">=dev-libs/libnl-3.2"; then
echo "CONFIG_LIBNL32=y" >> .config
fi
# TODO: Add support for BSD drivers
default_src_configure
}
src_compile() {
emake V=1
if use ssl; then
emake V=1 nt_password_hash
emake V=1 hlr_auc_gw
fi
}
src_install() {
insinto /etc/${PN}
doins ${PN}.{conf,accept,deny,eap_user,radius_clients,sim_db,wpa_psk}
fperms -R 600 /etc/${PN}
dosbin ${PN}
dobin ${PN}_cli
use ssl && dobin nt_password_hash hlr_auc_gw
newinitd "${FILESDIR}"/${PN}-init.d ${PN}
newconfd "${FILESDIR}"/${PN}-conf.d ${PN}
systemd_dounit "${FILESDIR}"/${PN}.service
doman ${PN}{.8,_cli.1}
dodoc ChangeLog README
use wps && dodoc README-WPS
docinto examples
dodoc wired.conf
if use logwatch; then
insinto /etc/log.d/conf/services/
doins logwatch/${PN}.conf
exeinto /etc/log.d/scripts/services/
doexe logwatch/${PN}
fi
}
pkg_postinst() {
einfo
einfo "If you are running openRC you need to follow this instructions:"
einfo "In order to use ${PN} you need to set up your wireless card"
einfo "for master mode in /etc/conf.d/net and then start"
einfo "/etc/init.d/${PN}."
einfo
einfo "Example configuration:"
einfo
einfo "config_wlan0=( \"192.168.1.1/24\" )"
einfo "channel_wlan0=\"6\""
einfo "essid_wlan0=\"test\""
einfo "mode_wlan0=\"master\""
einfo
#if [ -e "${KV_DIR}"/net/mac80211 ]; then
# einfo "This package now compiles against the headers installed by"
# einfo "the kernel source for the mac80211 driver. You should "
# einfo "re-emerge ${PN} after upgrading your kernel source."
#fi
if use wps; then
einfo "You have enabled Wi-Fi Protected Setup support, please"
einfo "read the README-WPS file in /usr/share/doc/${P}"
einfo "for info on how to use WPS"
fi
}