| # Copyright 1999-2016 Gentoo Foundation |
| # Distributed under the terms of the GNU General Public License v2 |
| # $Id$ |
| |
| EAPI=5 |
| inherit autotools eutils perl-module user systemd |
| |
| DESCRIPTION="The Advanced Maryland Automatic Network Disk Archiver" |
| HOMEPAGE="http://www.amanda.org/" |
| SRC_URI="mirror://sourceforge/amanda/${P}.tar.gz" |
| |
| LICENSE="HPND BSD BSD-2 GPL-2+ GPL-3+" |
| SLOT="0" |
| IUSE="curl gnuplot ipv6 kerberos minimal nls readline s3 samba systemd xfs" |
| |
| KEYWORDS="amd64 ~ppc ~ppc64 ~sparc ~x86" |
| RDEPEND="sys-libs/readline:= |
| virtual/awk |
| app-arch/tar |
| dev-lang/perl:= |
| app-arch/dump |
| net-misc/openssh |
| >=dev-libs/glib-2.26.0 |
| nls? ( virtual/libintl ) |
| s3? ( >=net-misc/curl-7.10.0 ) |
| !s3? ( curl? ( >=net-misc/curl-7.10.0 ) ) |
| samba? ( net-fs/samba:= ) |
| kerberos? ( app-crypt/mit-krb5 ) |
| xfs? ( sys-fs/xfsdump ) |
| !minimal? ( |
| dev-perl/XML-Simple |
| virtual/mailx |
| app-arch/mt-st:= |
| sys-block/mtx |
| gnuplot? ( sci-visualization/gnuplot ) |
| app-crypt/aespipe |
| app-crypt/gnupg |
| )" |
| |
| DEPEND="${RDEPEND} |
| virtual/pkgconfig |
| nls? ( sys-devel/gettext ) |
| >=app-text/docbook-xsl-stylesheets-1.72.0 |
| app-text/docbook-xml-dtd |
| dev-libs/libxslt |
| " |
| |
| MYFILESDIR="${T}/files" |
| ENVDIR="/etc/env.d" |
| ENVDFILE="97amanda" |
| TMPENVFILE="${T}/${ENVDFILE}" |
| |
| # This is a complete list of Amanda settings that the ebuild takes from the |
| # build environment. This allows users to alter the behavior of the package as |
| # upstream intended, but keeping with Gentoo style. We store a copy of them in |
| # /etc/env.d/97amanda during the install, so that they are preserved for future |
| # installed. This variable name must not start with AMANDA_, as we do not want |
| # it captured into the env file. |
| ENV_SETTINGS_AMANDA=" |
| AMANDA_GROUP_GID AMANDA_GROUP_NAME |
| AMANDA_USER_NAME AMANDA_USER_UID AMANDA_USER_SH AMANDA_USER_HOMEDIR AMANDA_USER_GROUPS |
| AMANDA_SERVER AMANDA_SERVER_TAPE AMANDA_SERVER_INDEX |
| AMANDA_TAR_LISTDIR AMANDA_TAR |
| AMANDA_PORTS_UDP AMANDA_PORTS_TCP AMANDA_PORTS_BOTH AMANDA_PORTS |
| AMANDA_CONFIG_NAME AMANDA_TMPDIR" |
| |
| amanda_variable_setup() { |
| |
| # Setting vars |
| local currentamanda |
| |
| # Grab the current settings |
| currentamanda="$(set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' | xargs)" |
| |
| # First we set the defaults |
| [ -z "${AMANDA_GROUP_GID}" ] && AMANDA_GROUP_GID=87 |
| [ -z "${AMANDA_GROUP_NAME}" ] && AMANDA_GROUP_NAME=amanda |
| [ -z "${AMANDA_USER_NAME}" ] && AMANDA_USER_NAME=amanda |
| [ -z "${AMANDA_USER_UID}" ] && AMANDA_USER_UID=87 |
| [ -z "${AMANDA_USER_SH}" ] && AMANDA_USER_SH=/bin/bash |
| [ -z "${AMANDA_USER_HOMEDIR}" ] && AMANDA_USER_HOMEDIR=/var/spool/amanda |
| [ -z "${AMANDA_USER_GROUPS}" ] && AMANDA_USER_GROUPS="${AMANDA_GROUP_NAME}" |
| |
| # This installs Amanda, with the server. However, it could be a client, |
| # just specify an alternate server name in AMANDA_SERVER. |
| [ -z "${AMANDA_SERVER}" ] && AMANDA_SERVER="${HOSTNAME}" |
| [ -z "${AMANDA_SERVER_TAPE}" ] && AMANDA_SERVER_TAPE="${AMANDA_SERVER}" |
| [ -z "${AMANDA_SERVER_INDEX}" ] && AMANDA_SERVER_INDEX="${AMANDA_SERVER}" |
| [ -z "${AMANDA_TAR_LISTDIR}" ] && AMANDA_TAR_LISTDIR=${AMANDA_USER_HOMEDIR}/tar-lists |
| [ -z "${AMANDA_CONFIG_NAME}" ] && AMANDA_CONFIG_NAME=DailySet1 |
| [ -z "${AMANDA_TMPDIR}" ] && AMANDA_TMPDIR=/var/tmp/amanda |
| [ -z "${AMANDA_DBGDIR}" ] && AMANDA_DBGDIR="$AMANDA_TMPDIR" |
| # These are left empty by default |
| [ -z "${AMANDA_PORTS_UDP}" ] && AMANDA_PORTS_UDP= |
| [ -z "${AMANDA_PORTS_TCP}" ] && AMANDA_PORTS_TCP= |
| [ -z "${AMANDA_PORTS_BOTH}" ] && AMANDA_PORTS_BOTH= |
| [ -z "${AMANDA_PORTS}" ] && AMANDA_PORTS= |
| |
| # What tar to use |
| [ -z "${AMANDA_TAR}" ] && AMANDA_TAR=/bin/tar |
| |
| # Now pull in the old stuff |
| if [ -f "${ROOT}${ENVDIR}/${ENVDFILE}" ]; then |
| # We don't just source it as we don't want everything in there. |
| eval $(egrep "^AMANDA_" "${ROOT}${ENVDIR}/${ENVDFILE}" | grep -v '^AMANDA_ENV_SETTINGS') |
| fi |
| |
| # Re-apply the new settings if any |
| [ -n "${currentamanda}" ] && eval `echo "${currentamanda}"` |
| |
| } |
| |
| pkg_setup() { |
| amanda_variable_setup |
| |
| # If USE=minimal, give out a warning, if AMANDA_SERVER is not set to |
| # another host than HOSTNAME. |
| if use minimal && [ "${AMANDA_SERVER}" = "${HOSTNAME}" ] ; then |
| elog "You are installing a client-only version of Amanda." |
| elog "You should set the variable \$AMANDA_SERVER to point at your" |
| elog "Amanda-tape-server, otherwise you will have to specify its name" |
| elog "when using amrecover on the client." |
| elog "For example: Use something like" |
| elog "AMANDA_SERVER=\"myserver\" emerge amanda" |
| elog |
| fi |
| |
| enewgroup "${AMANDA_GROUP_NAME}" "${AMANDA_GROUP_GID}" |
| enewuser "${AMANDA_USER_NAME}" "${AMANDA_USER_UID}" "${AMANDA_USER_SH}" "${AMANDA_USER_HOMEDIR}" "${AMANDA_USER_GROUPS}" |
| } |
| |
| src_unpack() { |
| # we do not want the perl src_unpack |
| default_src_unpack |
| } |
| |
| src_prepare() { |
| # gentoo bug #331111 |
| sed -i '/^check-local: check-perl$/d' "${S}"/config/automake/scripts.am |
| sed -i '/^check-local:/s,syntax-check,,g' "${S}"/perl/Makefile.am |
| |
| # bug with glibc-2.16.0 |
| sed -i -e '/gets is a security/d' "${S}"/gnulib/stdio.in.h |
| |
| eautoreconf |
| |
| # places for us to work in |
| mkdir -p "${MYFILESDIR}" |
| # Now we store the settings we just created |
| set | egrep "^AMANDA_" | grep -v '^AMANDA_ENV_SETTINGS' > "${TMPENVFILE}" |
| |
| # Prepare our custom files |
| einfo "Building custom configuration files" |
| local i # our iterator |
| local sedexpr # var for sed expr |
| sedexpr='' |
| for i in ${ENV_SETTINGS_AMANDA} ; do |
| local val |
| eval "val=\"\${${i}}\"" |
| sedexpr="${sedexpr}s|__${i}__|${val}|g;" |
| done |
| |
| # now apply the sed expr |
| for i in "${FILESDIR}"/amanda-* ; do |
| sed -re "${sedexpr}" <"${i}" >"${MYFILESDIR}/`basename ${i}`" |
| done |
| |
| ( |
| cat "${MYFILESDIR}"/amanda-amandahosts-client-2.5.1_p3-r1 |
| use minimal || cat "${MYFILESDIR}"/amanda-amandahosts-server-2.5.1_p3-r1 |
| ) > "${T}"/amandahosts |
| |
| if ! use minimal; then |
| sed -i -e 's:^\(my $amandahomedir\)=.*:\1 = $localstatedir;:' \ |
| server-src/am{addclient,serverconfig}.pl || die |
| fi |
| |
| epatch "${FILESDIR}"/${P}-stuck.patch |
| } |
| |
| src_configure() { |
| # fix bug #36316 |
| addpredict /var/cache/samba/gencache.tdb |
| # fix bug #376169 |
| addpredict /run/blkid |
| addpredict /etc/blkid.tab |
| |
| [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" |
| source "${TMPENVFILE}" |
| local myconf |
| |
| einfo "Using ${AMANDA_SERVER_TAPE} for tape server." |
| myconf="${myconf} --with-tape-server=${AMANDA_SERVER_TAPE}" |
| einfo "Using ${AMANDA_SERVER_INDEX} for index server." |
| myconf="${myconf} --with-index-server=${AMANDA_SERVER_INDEX}" |
| einfo "Using ${AMANDA_USER_NAME} for amanda user." |
| myconf="${myconf} --with-user=${AMANDA_USER_NAME}" |
| einfo "Using ${AMANDA_GROUP_NAME} for amanda group." |
| myconf="${myconf} --with-group=${AMANDA_GROUP_NAME}" |
| einfo "Using ${AMANDA_TAR} as Tar implementation." |
| myconf="${myconf} --with-gnutar=${AMANDA_TAR}" |
| einfo "Using ${AMANDA_TAR_LISTDIR} as tar listdir." |
| myconf="${myconf} --with-gnutar-listdir=${AMANDA_TAR_LISTDIR}" |
| einfo "Using ${AMANDA_CONFIG_NAME} as default config name." |
| myconf="${myconf} --with-config=${AMANDA_CONFIG_NAME}" |
| einfo "Using ${AMANDA_TMPDIR} as Amanda temporary directory." |
| myconf="${myconf} --with-tmpdir=${AMANDA_TMPDIR}" |
| |
| if [ -n "${AMANDA_PORTS_UDP}" ] && [ -n "${AMANDA_PORTS_TCP}" ] && [ -z "${AMANDA_PORTS_BOTH}" ] ; then |
| eerror "If you want _both_ UDP and TCP ports, please use only the" |
| eerror "AMANDA_PORTS environment variable for identical ports, or set" |
| eerror "AMANDA_PORTS_BOTH." |
| die "Bad port setup!" |
| fi |
| if [ -n "${AMANDA_PORTS_UDP}" ]; then |
| einfo "Using UDP ports ${AMANDA_PORTS_UDP/,/-}" |
| myconf="${myconf} --with-udpportrange=${AMANDA_PORTS_UDP}" |
| fi |
| if [ -n "${AMANDA_PORTS_TCP}" ]; then |
| einfo "Using TCP ports ${AMANDA_PORTS_TCP/,/-}" |
| myconf="${myconf} --with-tcpportrange=${AMANDA_PORTS_TCP}" |
| fi |
| if [ -n "${AMANDA_PORTS}" ]; then |
| einfo "Using ports ${AMANDA_PORTS/,/-}" |
| myconf="${myconf} --with-portrange=${AMANDA_PORTS}" |
| fi |
| |
| # Extras |
| # Speed option |
| myconf="${myconf} --with-buffered-dump" |
| # "debugging" in the configuration is NOT debug in the conventional sense. |
| # It is actually just useful output in the application, and should remain |
| # enabled. There are some cases of breakage with MTX tape changers as of |
| # 2.5.1p2 that it exposes when turned off as well. |
| myconf="${myconf} --with-debugging" |
| # Where to put our files |
| myconf="${myconf} --localstatedir=${AMANDA_USER_HOMEDIR}" |
| |
| # Samba support |
| myconf="${myconf} `use_with samba smbclient /usr/bin/smbclient`" |
| |
| # Support for BSD, SSH, BSDUDP, BSDTCP security methods all compiled in by |
| # default |
| myconf="${myconf} --with-bsd-security" |
| myconf="${myconf} --with-ssh-security" |
| myconf="${myconf} --with-bsdudp-security" |
| myconf="${myconf} --with-bsdtcp-security" |
| |
| # kerberos-security mechanism version 5 |
| myconf="${myconf} `use_with kerberos krb5-security`" |
| |
| # Amazon S3 support |
| myconf="${myconf} `use_enable s3 s3-device`" |
| |
| # libcurl is required for S3 but otherwise optional |
| if ! use s3; then |
| myconf="${myconf} $(use_with curl libcurl)" |
| fi |
| |
| # Client only, as requested in bug #127725 |
| if use minimal ; then |
| myconf="${myconf} --without-server" |
| else |
| # amplot |
| myconf="${myconf} $(use_with gnuplot)" |
| fi |
| |
| # IPv6 fun. |
| myconf="${myconf} `use_with ipv6`" |
| # This is to prevent the IPv6-is-working test |
| # As the test fails on binpkg build hosts with no IPv6. |
| use ipv6 && export amanda_cv_working_ipv6=yes |
| |
| # I18N |
| myconf="${myconf} `use_enable nls`" |
| |
| # Bug #296634: Perl location |
| perl_set_version |
| myconf="${myconf} --with-amperldir=${VENDOR_LIB}" |
| |
| # Bug 296633: --disable-syntax-checks |
| # Some tests are not safe for production systems |
| myconf="${myconf} --disable-syntax-checks" |
| |
| # build manpages |
| myconf="${myconf} --enable-manpage-build" |
| |
| # bug #483120 |
| tc-export AR |
| |
| econf \ |
| $(use_with readline) \ |
| ${myconf} |
| } |
| |
| src_compile() { |
| # Again, do not want the perl-module src_compile |
| default_src_compile |
| } |
| |
| src_install() { |
| [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" |
| source ${TMPENVFILE} |
| |
| einfo "Doing stock install" |
| emake DESTDIR="${D}" install || die |
| |
| # Build the envdir file |
| # Don't forget this.. |
| einfo "Building environment file" |
| ( |
| echo "# These settings are what was present in the environment when this" |
| echo "# Amanda was compiled. Changing anything below this comment will" |
| echo "# have no effect on your application, but it merely exists to" |
| echo "# preserve them for your next emerge of Amanda" |
| cat "${TMPENVFILE}" | sed "s,=\$,='',g" |
| ) >> "${MYFILESDIR}/${ENVDFILE}" |
| |
| # Env.d |
| einfo "Installing environment config file" |
| doenvd "${MYFILESDIR}/${ENVDFILE}" |
| |
| # Lock down next section (up until docs). |
| insopts -m0640 |
| # Installing Amanda Xinetd Services Definition |
| einfo "Installing xinetd service file" |
| insinto /etc/xinetd.d |
| if use minimal ; then |
| newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-client amanda |
| else |
| newins "${MYFILESDIR}"/amanda-xinetd-2.6.1_p1-server amanda |
| fi |
| |
| if ! use minimal; then |
| einfo "Installing Sample Daily Cron Job for Amanda" |
| insinto /etc/cron.daily |
| newins "${MYFILESDIR}/amanda-cron" amanda |
| fi |
| |
| einfo "Installing systemd service and socket files for Amanda" |
| systemd_dounit "${FILESDIR}"/amanda.socket || die |
| systemd_newunit "${FILESDIR}"/amanda.service-r1 'amanda@.service' || die |
| |
| insinto /etc/amanda |
| einfo "Installing .amandahosts File for ${AMANDA_USER_NAME} user" |
| doins "${T}/amandahosts" |
| fperms 600 /etc/amanda/amandahosts |
| |
| dosym /etc/amanda/amandahosts "${AMANDA_USER_HOMEDIR}/.amandahosts" |
| insinto "${AMANDA_USER_HOMEDIR}" |
| einfo "Installing .profile for ${AMANDA_USER_NAME} user" |
| newins "${MYFILESDIR}/amanda-profile" .profile |
| |
| insinto /etc/amanda |
| doins "${S}/example/amanda-client.conf" |
| if ! use minimal ; then |
| insinto "/etc/amanda/${AMANDA_CONFIG_NAME}" |
| doins "${S}/example/amanda.conf" |
| doins "${S}/example/disklist" |
| keepdir "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}/index" |
| fi |
| |
| keepdir "${AMANDA_TAR_LISTDIR}" |
| keepdir "${AMANDA_USER_HOMEDIR}/amanda" |
| keepdir "${AMANDA_TMPDIR}/dumps" |
| # Just make sure it exists for XFS to work... |
| use xfs && keepdir /var/xfsdump/inventory |
| |
| local i |
| for i in "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ |
| "${AMANDA_TMPDIR}" /etc/amanda; do |
| einfo "Securing directory (${i})" |
| fowners -R ${AMANDA_USER_NAME}:${AMANDA_GROUP_NAME} ${i} |
| done |
| # Do NOT use -R |
| fperms 0700 \ |
| "${AMANDA_USER_HOMEDIR}" "${AMANDA_TAR_LISTDIR}" \ |
| "${AMANDA_TMPDIR}" "${AMANDA_TMPDIR}/dumps" \ |
| "${AMANDA_USER_HOMEDIR}/amanda" \ |
| /etc/amanda |
| |
| if ! use minimal ; then |
| fperms 0700 \ |
| "${AMANDA_USER_HOMEDIR}/${AMANDA_CONFIG_NAME}" \ |
| /etc/amanda/${AMANDA_CONFIG_NAME} |
| fi |
| |
| einfo "Setting setuid permissions" |
| amanda_permissions_fix "${D}" |
| |
| # Relax permissions again |
| insopts -m0644 |
| |
| # docs |
| einfo "Installing documentation" |
| dodoc AUTHORS ChangeLog DEVELOPING NEWS README ReleaseNotes UPGRADING |
| # our inetd sample |
| einfo "Installing standard inetd sample" |
| newdoc "${MYFILESDIR}/amanda-inetd.amanda.sample-2.6.0_p2-r2" amanda-inetd.amanda.sample |
| # Amanda example configs |
| einfo "Installing example configurations" |
| rm "${D}"/usr/share/amanda/{COPYRIGHT,ChangeLog,NEWS,ReleaseNotes} |
| mv "${D}/usr/share/amanda/example" "${D}/usr/share/doc/${PF}/" |
| docinto example1 |
| newdoc "${FILESDIR}/example_amanda.conf" amanda.conf |
| newdoc "${FILESDIR}/example_disklist-2.5.1_p3-r1" disklist |
| newdoc "${FILESDIR}/example_global.conf" global.conf |
| |
| einfo "Cleaning up dud .la files" |
| perl_set_version |
| find "${D}"/"${VENDOR_LIB}" -name '*.la' -print0 |xargs -0 rm -f |
| } |
| |
| pkg_postinst() { |
| [ ! -f "${TMPENVFILE}" -a "$MERGE_TYPE" == "binary" ] && \ |
| TMPENVFILE="${ROOT}${ENVDIR}/${ENVDFILE}" |
| [ ! -f "${TMPENVFILE}" ] && die "Variable setting file (${TMPENVFILE}) should exist!" |
| source "${TMPENVFILE}" |
| |
| # Migration of amandates from /etc to $localstatedir/amanda |
| if [ -f "${ROOT}/etc/amandates" -a \ |
| ! -f "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" ]; then |
| einfo "Migrating amandates from /etc/ to ${AMANDA_USER_HOMEDIR}/amanda" |
| einfo "A backup is also placed at /etc/amandates.orig" |
| cp -dp "${ROOT}/etc/amandates" "${ROOT}/etc/amandates.orig" |
| mkdir -p "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/" |
| cp -dp "${ROOT}/etc/amandates" "${ROOT}/${AMANDA_USER_HOMEDIR}/amanda/amandates" |
| fi |
| if [ -f "${ROOT}/etc/amandates" ]; then |
| einfo "If you have migrated safely, please delete /etc/amandates" |
| fi |
| |
| einfo "Checking setuid permissions" |
| amanda_permissions_fix "${ROOT}" |
| |
| elog "You should configure Amanda in /etc/amanda now." |
| elog |
| elog "If you use xinetd, Don't forget to check /etc/xinetd.d/amanda" |
| elog "and restart xinetd afterwards!" |
| elog |
| elog "Otherwise, please look at /usr/share/doc/${PF}/inetd.amanda.sample" |
| elog "as an example of how to configure your inetd." |
| elog |
| elog "systemd-users: enable and start amanda.socket or the relevant services" |
| elog "regarding what auth method you use." |
| elog |
| elog "NOTICE: If you need raw access to partitions you need to add the" |
| elog "amanda user to the 'disk' group." |
| elog |
| elog "NOTICE: If you have a tape changer, you need to add the amanda user" |
| elog "to the 'tape' group." |
| elog |
| elog "If you use localhost in your disklist your restores may break." |
| elog "You should replace it with the actual hostname!" |
| elog "Please also see the syntax changes to amandahosts." |
| elog "The only exception is when you use the authentication method 'local'." |
| |
| elog "Please note that this package no longer explicitly depends on" |
| elog "virtual/inetd, as it supports modes where an inetd is not needed" |
| elog "(see bug #506028 for details)." |
| } |
| |
| # We have had reports of amanda file permissions getting screwed up. |
| # Losing setuid, becoming too lax etc. |
| # ONLY root and users in the amanda group should be able to run these binaries! |
| amanda_permissions_fix() { |
| local root="$1" |
| [ -z "${root}" ] && die "Failed to pass root argument to amanda_permissions_fix!" |
| local le="/usr/libexec/amanda" |
| for i in /usr/sbin/amcheck "${le}"/calcsize "${le}"/killpgrp \ |
| "${le}"/rundump "${le}"/runtar "${le}"/dumper \ |
| "${le}"/planner ; do |
| chown root:${AMANDA_GROUP_NAME} "${root}"/${i} |
| chmod u=srwx,g=rx,o= "${root}"/${i} |
| done |
| } |