| # Copyright 1999-2009 Gentoo Foundation |
| # Distributed under the terms of the GNU General Public License v2 |
| # $Header: /var/cvsroot/gentoo-x86/media-tv/ivtv/ivtv-1.0.1.ebuild,v 1.9 2009/03/03 17:25:32 beandog Exp $ |
| |
| inherit eutils linux-mod |
| |
| DESCRIPTION="ivtv driver for Hauppauge PVR PCI cards" |
| HOMEPAGE="http://www.ivtvdriver.org" |
| SRC_URI="http://dl.ivtvdriver.org/ivtv/archive/1.0.x/${P}.tar.gz" |
| SLOT="0" |
| LICENSE="GPL-2" |
| KEYWORDS="~amd64 ~ppc ~x86" |
| IUSE="fbcon" |
| RDEPEND="|| ( >=sys-fs/udev-103 sys-apps/hotplug )" |
| DEPEND="app-arch/unzip" |
| PDEPEND=">=media-tv/ivtv-firmware-20070217" |
| |
| pkg_setup() { |
| |
| MODULE_NAMES="saa717x(extra:${S}/i2c-drivers)" |
| BUILD_TARGETS="all" |
| CONFIG_CHECK="EXPERIMENTAL KMOD HAS_IOMEM FW_LOADER I2C I2C_ALGOBIT |
| VIDEO_DEV VIDEO_CAPTURE_DRIVERS VIDEO_V4L1 VIDEO_V4L2 |
| !VIDEO_HELPER_CHIPS_AUTO VIDEO_IVTV" |
| |
| if use fbcon; then |
| MODULE_NAMES="${MODULE_NAMES} ivtv-fb(extra:${S}/driver)" |
| CONFIG_CHECK="${CONFIG_CHECK} FB FB_TRIDENT FRAMEBUFFER_CONSOLE FONTS" |
| fi |
| |
| if ! ( kernel_is 2 6 22 ); then |
| eerror "Each IVTV driver branch will only work with a specific" |
| eerror "linux kernel branch." |
| eerror "" |
| eerror "You will need to either:" |
| eerror "a) emerge a different kernel" |
| eerror "b) emerge a different ivtv driver" |
| eerror "" |
| eerror "See http://ivtvdriver.org/ for more information" |
| die "This only works on 2.6.22 kernels" |
| fi |
| |
| if use fbcon; then |
| ewarn "" |
| ewarn "From the README regarding framebuffer support:" |
| ewarn "" |
| ewarn "ivtv-fb now requires that you enable the following kernel config" |
| ewarn "options: Go to 'Device drivers -> Graphics support'. Enable" |
| ewarn "'Support for frame buffer devices'. Enable 'Trident support'" |
| ewarn "(the Trident module itself is not required)." |
| ewarn "" |
| ewarn "To get working console output, keep going to 'Console display" |
| ewarn "driver support', and enable 'Framebuffer Console support'." |
| ewarn "Enable 'Select compiled-in fonts' & once that's done, you should" |
| ewarn "have a list of fonts. Choose one. With the default OSD size," |
| ewarn "'VGA 8x16' gives 80x30(PAL) 80x25(NTSC)." |
| ewarn "" |
| ewarn "This ebuild checks for all the correct kernel config options for" |
| ewarn "framebuffer use with the exception of choosing a font. Be sure" |
| ewarn "to pick one yourself!" |
| ewarn "" |
| fi |
| |
| ewarn "" |
| ewarn "Make sure that your I2C and V4L kernel drivers are loaded as" |
| ewarn "modules, and not compiled into the kernel, or IVTV will not" |
| ewarn "work." |
| ewarn "" |
| |
| linux-mod_pkg_setup |
| |
| BUILD_PARAMS="KDIR=${KV_DIR}" |
| } |
| |
| src_compile() { |
| |
| cd "${S}/driver" |
| linux-mod_src_compile || die "failed to build driver" |
| |
| cd "${S}/utils" |
| emake INCDIR="${KV_DIR}/include" || die "failed to build utils " |
| } |
| |
| src_install() { |
| cd "${S}/utils" |
| make DESTDIR="${D}" PREFIX="/usr" install || die "failed to install utils" |
| dobin perl/*.pl |
| |
| cd "${S}" |
| dodoc README* doc/* utils/README.X11 ChangeLog* utils/perl/README.ptune |
| |
| cd "${S}/driver" |
| linux-mod_src_install || die "failed to install modules" |
| } |
| |
| pkg_postinst() { |
| |
| linux-mod_pkg_postinst |
| |
| elog "" |
| elog "This version of the IVTV driver supports the following hardware:" |
| elog "Hauppauge WinTV PVR-250" |
| elog "Hauppauge WinTV PVR-350" |
| elog "Hauppauge WinTV PVR-150" |
| elog "Hauppauge WinTV PVR-500" |
| elog "AVerMedia M179" |
| elog "Yuan MPG600/Kuroutoshikou iTVC16-STVLP" |
| elog "Yuan MPG160/Kuroutoshikou iTVC15-STVLP" |
| elog "Yuan PG600/DiamondMM PVR-550 (CX Falcon 2)" |
| elog "Adaptec AVC-2410" |
| elog "Adaptec AVC-2010" |
| elog "Nagase Transgear 5000TV" |
| elog "AOpen VA2000MAX-STN6" |
| elog "Yuan MPG600GR/Kuroutoshikou CX23416GYC-STVLP" |
| elog "I/O Data GV-MVP/RX" |
| elog "I/O Data GV-MVP/RX2E" |
| elog "Gotview PCI DVD (preliminary support only)" |
| elog "Gotview PCI DVD2 Deluxe" |
| elog "Yuan MPC622" |
| elog "" |
| ewarn "" |
| ewarn "IMPORTANT: In case of problems first read this page:" |
| ewarn "http://www.ivtvdriver.org/index.php/Troubleshooting" |
| ewarn "" |
| ewarn "If any of these conditions match your setup, you may want to look at the" |
| ewarn "README in /usr/share/doc/${PF}/" |
| ewarn "" |
| ewarn " - Using MythTV, a PVR-350 and the ivtv-fb module" |
| ewarn " - Using the ivtv X driver and the ivtv-fb module" |
| ewarn " - You want to manually build ivtv against v4l-dvb" |
| ewarn "" |
| ewarn "Also, the ivtv package comes with lots of documentation regarding setup," |
| ewarn "proper use and debugging utilities." |
| ewarn "They are also located in /usr/share/doc/${PF}/" |
| ewarn "" |
| ewarn "For more information, see the IVTV driver homepage at:" |
| ewarn "http://www.ivtvdriver.org/" |
| } |