#!/bin/bash

# Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# Unit tests for capture_utility.sh

expect_eq ()
{
  local name="${1}"
  local expected_value="${2}"
  local -a actual_value=(${3})

  if [[ "${expected_value}" != "${actual_value[@]}" ]] ; then
    fatal_error "${name}: is ${actual_value} instead of ${expected_value}"
  fi
}

test_configure_monitor ()
{
  iw () {
    if [[ "$#" != 5 || "${*}" != "dev int0 set freq 1000" ]] ; then
      fatal_error "Unexpected arguments to iw: $*"
    fi
  }
  $(configure_monitor int0 1000)
  iw () {
    if [[ "$#" != 6 || "${*}" != "dev int1 set freq 2000 HT40+" ]] ; then
      fatal_error "Unexpected arguments to iw: $*"
    fi
  }
  $(configure_monitor int1 2000 above)
  iw () {
    if [[ "$#" != 6 || "${*}" != "dev int2 set freq 3000 HT40-" ]] ; then
      fatal_error "Unexpected arguments to iw: $*"
    fi
  }
  $(configure_monitor int2 3000 below)
}

test_create_monitor ()
{
  iw () {
    if [[ "$#" != 7 ||
          "${*}" != "phy phy0 interface add phy0_mon type monitor" ]] ; then
      fatal_error "Unexpected arguments to iw: $*"
    fi
  }
  expect_eq "create_monitor phy" "phy0_mon" "$(create_monitor phy0)"
}

test_device_list ()
{
  ifconfig () {
    if [[ "$#" != 1 || "${1}" != "-a" ]] ; then
      fatal_error "Unexpected arguments to ifconfig: $*"
    fi
    echo -e "int0\n  int1\nint2"
  }
  local -a devices=($(get_device_list))
  if [[ "${#devices[@]}" != 2 || "${devices[0]}" != "int0" ||
        "${devices[1]}" != "int2" ]] ; then
    fatal_error "Unexpected device list (size ${#devices[@]}): ${devices[@]}"
  fi
}

test_get_devices_for_phy ()
{
  iw () {
    if [[ "$#" != 1 || "${1}" != "dev" ]] ; then
      fatal_error "Unexpected arguments to iw: $*"
    fi
    echo -e "phy#0\n\tInterface phy0_mon\n\t\ttype monitor"
    echo -e "phy#1\n\tInterface phy1_managed\n\t\ttype managed"
    echo -e "\tInterface phy1_mon\n\t\ttype monitor"
    echo -e "phy#2"
  }
  expect_eq "phy0 devices" "phy0_mon" "$(get_devices_for_phy 0)"
  expect_eq "phy1 devices" "phy1_managed phy1_mon" "$(get_devices_for_phy phy1)"
  expect_eq "phy2 devices" "" "$(get_devices_for_phy 2)"
}

test_get_ht_info ()
{
  iw () {
    if [[ "$#" != 4 || "${1}" != "dev" || "${2}" != "int0" ||
          "${3}" != "scan" || "${4}" != "dump" ]] ; then
      fatal_error "Unexpected arguments to iw: $*"
    fi
    echo -e 'BSS 00:11:22\n\tfreq: 1000\n\t\* secondary channel offset: above'
    echo -e 'BSS 33:44:55\n\tfreq: 2000\n\t\* secondary channel offset: below'
    echo -e 'BSS 66:77:88\n\tfreq: 3000\n\t\* secondary channel offset: no'
    echo -e 'BSS 99:aa:bb\n\tfreq: 4000'
  }
  expect_eq "ht info 1000" "above" "$(get_ht_info int0 00:11:22 1000)"
  expect_eq "ht info 2000" "below" "$(get_ht_info int0 33:44:55 2000)"
  expect_eq "ht info 3000" "" "$(get_ht_info int0 66:77:88 3000)"
  expect_eq "ht info 4000" "" "$(get_ht_info int0 99:aa:bb 4000)"
}

test_get_link_info ()
{
  iw () {
    if [[ "$#" != 3 || "${1}" != "dev" || "${3}" != "link" ]] ; then
      fatal_error "Unexpected arguments to iw: $*"
    fi
    local device="${2}"
    if [[ "${device}" == "int0" ]] ; then
      return
    elif [[ "${device}" == "int1" ]] ; then
      echo -e 'Connected to 00:11:22\n\tfreq: 1000'
    else
      fatal_error "Unexpected device argument to iw: ${device}"
    fi
  }
  expect_eq "int0 link info" "" "$(get_link_info int0)"
  expect_eq "int1 link info" "00:11:22 1000" "$(get_link_info int1)"
}

test_get_monitor_device ()
{
  # Only one device exists, and is already in monitor mode.
  get_device_list () {
    echo int0
  }
  get_phy_info () {
    echo "monitor 0"
  }
  configure_monitor () {
    return 1
  }
  # Since configure_monitor failed.
  expect_eq "Device from failed configure" "" "$(get_monitor_device 1000)"

  configure_monitor () {
    return
  }

  # Successful configure_monitor of first available device.
  # Since configure_monitor failed.
  expect_eq "Device from good configure" "int0" "$(get_monitor_device 1000)"

  get_monitor_phy_list () {
    echo phy0
  }

  # Only available device is also on the phy we are looking for.
  expect_eq "Only device" "int0" "$(get_monitor_device 1000 "" 0)"

  create_monitor () {
    echo "${1}_mon"
  }
  get_phy_info () {
    echo "managed 0"
  }

  # Create a monitor device on the shared phy.
  expect_eq "Created monitor dev" "phy0_mon" "$(get_monitor_device 1000 "" 0)"

  get_monitor_phy_list () {
    echo phy0 phy1
  }
  configure_monitor () {
    if [[ "${1}" != "phy0_mon" ]] ; then
      return 1
    fi
  }

  iw () {
    if [[ "$@" != "dev phy1_mon del" ]] ; then
      fatal_error "Unexpected iw args"
    fi
  }

  # Presented with another phy, we try that first but fail.
  expect_eq "Created monitor #2" "phy0_mon" "$(get_monitor_device 1000 "" 0)"
}

test_get_monitor_for_link ()
{
  get_phy_info () {
    echo "mumble 0"
  }
  expect_eq "Non-managed phy" "" "$(get_monitor_for_link int0)"
  get_phy_info () {
    echo "managed 0"
  }
  get_link_info () {
    return
  }
  expect_eq "No link exists" "" "$(get_monitor_for_link int0)"
  get_link_info () {
    echo "00:11:22 1000"
  }
  get_ht_info () {
    echo "above"
  }
  get_monitor_device () {
    return
  }
  expect_eq "get_monitor_device failed" "" "$(get_monitor_for_link int0)"
  get_monitor_device () {
    expect_eq "get_monitor_device args" "1000 above 0" "$*"
    echo "mon0"
  }
  expect_eq "get_monitor_device succeeded" "mon0" "$(get_monitor_for_link int0)"
  configure_monitor () {
    return 1
  }
  expect_eq "configure failed" "" "$(get_monitor_for_link int0 int1)"
  configure_monitor () {
    return 0
  }
  expect_eq "configure succeeded" "int1" "$(get_monitor_for_link int0 int1)"
}

test_get_monitor_phy_list ()
{
  iw () {
    if [[ "$#" != 1 || "${1}" != "phy" ]] ; then
      fatal_error "Unexpected arguments to iw: $*"
    fi
    echo -e 'Wiphy phy0\n\t* 1000 MHz\n\t\t * monitor'
    echo -e 'Wiphy phy1\n\t* 1000 MHz\n\t\t * station'
    echo -e 'Wiphy phy2\n\t* 2000 MHz\n\t\t * monitor'
    echo -e 'Wiphy phy3\n\t* 2000 MHz\n\t\t * monitor'
  }
  expect_eq "phys for frequency 1000" "phy0" "$(get_monitor_phy_list 1000)"
  expect_eq "phys for frequency 2000" "phy2 phy3" "$(get_monitor_phy_list 2000)"
}

test_get_phy_info ()
{
  local device=dev0
  local dtype=travis
  local wiphy=199
  iw () {
    if [[ "$#" != 3 || "${1}" != "dev" || "${2}" != "${device}" ||
          "${3}" != "info" ]] ; then
      fatal_error "Unexpected arguments to iw: $*"
    fi
    echo -e "Interface ${device}\n\ttype ${dtype}\n\twiphy ${wiphy}"
  }
  expect_eq "Phy info" "${dtype} ${wiphy}" "$(get_phy_info ${device})"
}

main ()
{
  # Load the capture utility functions.  Set the command line to something
  # inocuous so the capture main function returns cleanly without exiting.
  set -- --help
  . $(dirname $0)/capture_utility.sh >/dev/null

  # Since these tests work mostly by mocking out functions, we should
  # run each test in its own subshell.
  local ret=0
  for test in \
      configure_monitor \
      create_monitor \
      device_list \
      get_devices_for_phy \
      get_ht_info \
      get_link_info \
      get_monitor_device \
      get_monitor_for_link \
      get_monitor_phy_list \
      get_phy_info; do
    if (test_${test}) ; then
      echo "Passed: $test"
    else
      echo "Failed: $test"
      ret=1
    fi
  done
  return $ret
}

set -e
main