| |
| /dev/sda: |
| |
| ATA device, with non-removable media |
| Model Number: SAMSUNG MZAPF032HCFV-000H1 |
| Serial Number: S1BMNYAD700041 |
| Firmware Revision: FXM21H2Q |
| Media Serial Num: |
| Transport: Serial, ATA8-AST, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0 |
| Standards: |
| Used: unknown (minor revision code 0x0039) |
| Supported: 9 8 7 6 5 |
| Likely used: 9 |
| Configuration: |
| Logical max current |
| cylinders 16383 16383 |
| heads 16 16 |
| sectors/track 63 63 |
| -- |
| CHS current addressable sectors: 16514064 |
| LBA user addressable sectors: 62533296 |
| LBA48 user addressable sectors: 62533296 |
| Logical Sector size: 512 bytes |
| Physical Sector size: 512 bytes |
| Logical Sector-0 offset: 0 bytes |
| device size with M = 1024*1024: 30533 MBytes |
| device size with M = 1000*1000: 32017 MBytes (32 GB) |
| cache/buffer size = unknown |
| Nominal Media Rotation Rate: Solid State Device |
| Capabilities: |
| LBA, IORDY(can be disabled) |
| Queue depth: 32 |
| Standby timer values: spec'd by Standard, no device specific minimum |
| R/W multiple sector transfer: Max = 16 Current = 16 |
| DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 *udma6 |
| Cycle time: min=120ns recommended=120ns |
| PIO: pio0 pio1 pio2 pio3 pio4 |
| Cycle time: no flow control=120ns IORDY flow control=120ns |
| Commands/features: |
| Enabled Supported: |
| * SMART feature set |
| Security Mode feature set |
| * Power Management feature set |
| * Write cache |
| * Look-ahead |
| * WRITE_BUFFER command |
| * READ_BUFFER command |
| * NOP cmd |
| * DOWNLOAD_MICROCODE |
| * 48-bit Address feature set |
| * Mandatory FLUSH_CACHE |
| * FLUSH_CACHE_EXT |
| * SMART error logging |
| * SMART self-test |
| * General Purpose Logging feature set |
| * 64-bit World wide name |
| * WRITE_UNCORRECTABLE_EXT command |
| * {READ,WRITE}_DMA_EXT_GPL commands |
| * Segmented DOWNLOAD_MICROCODE |
| * Gen1 signaling speed (1.5Gb/s) |
| * Gen2 signaling speed (3.0Gb/s) |
| * Gen3 signaling speed (6.0Gb/s) |
| * Native Command Queueing (NCQ) |
| * Phy event counters |
| * unknown 76[15] |
| * DMA Setup Auto-Activate optimization |
| Device-initiated interface power management |
| Asynchronous notification (eg. media change) |
| * Software settings preservation |
| unknown 78[8] |
| * SMART Command Transport (SCT) feature set |
| * SCT LBA Segment Access (AC2) |
| * SCT Error Recovery Control (AC3) |
| * SCT Features Control (AC4) |
| * SCT Data Tables (AC5) |
| * DOWNLOAD MICROCODE DMA command |
| * WRITE BUFFER DMA command |
| * READ BUFFER DMA command |
| * Data Set Management TRIM supported (limit 8 blocks) |
| Security: |
| Master password revision code = 65534 |
| supported |
| not enabled |
| not locked |
| not frozen |
| not expired: security count |
| supported: enhanced erase |
| 2min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT. |
| Logical Unit WWN Device Identifier: 5002538500000000 |
| NAA : 5 |
| IEEE OUI : 002538 |
| Unique ID : 500000000 |
| Checksum: correct |
