| /* -*- mode:c -*- |
| * |
| * Copyright (c) 2014 The Chromium OS Authors. All rights reserved. |
| * Use of this source code is governed by a BSD-style license that can be |
| * found in the LICENSE file. |
| */ |
| |
| /* Inputs with interrupt handlers are first for efficiency */ |
| GPIO(KB_IN00, B, 8, GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) |
| GPIO(KB_IN01, B, 9, GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) |
| GPIO(KB_IN02, B, 10, GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) |
| GPIO(KB_IN03, B, 11, GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) |
| GPIO(KB_IN04, B, 12, GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) |
| GPIO(KB_IN05, B, 13, GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) |
| GPIO(KB_IN06, B, 14, GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) |
| GPIO(KB_IN07, B, 15, GPIO_KB_INPUT, keyboard_raw_gpio_interrupt) |
| |
| /* TODO(crosbug.com/p/23494): interrupt handler for power button */ |
| GPIO(KBD_PWR_BUTTON, B, 2, GPIO_INPUT, NULL) |
| |
| GPIO(OMZO_RDY_L, A, 0, GPIO_INPUT, NULL) /* PA0_WKUP */ |
| GPIO(OZMO_RST_L, A, 2, GPIO_ODR_HIGH, NULL) |
| GPIO(VBUS_UP_DET, A, 3, GPIO_INPUT, NULL) |
| GPIO(OZMO_REQ_L, A, 8, GPIO_INPUT, NULL) |
| GPIO(CHARGE_ZERO, B, 0, GPIO_INPUT, NULL) |
| GPIO(CHARGE_SHUNT, B, 1, GPIO_INPUT, NULL) |
| GPIO(PMIC_INT_L, B, 5, GPIO_INPUT, NULL) |
| |
| /* |
| * I2C pins should be configured as inputs until I2C module is |
| * initialized. This will avoid driving the lines unintentionally. |
| */ |
| GPIO(I2C1_SCL, B, 6, GPIO_INPUT, NULL) |
| GPIO(I2C1_SDA, B, 7, GPIO_INPUT, NULL) |
| |
| GPIO(KB_OUT00, C, 0, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT01, C, 1, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT02, C, 2, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT03, C, 3, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT04, C, 4, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT05, C, 5, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT06, C, 6, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT07, C, 7, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT08, C, 8, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT09, C, 9, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT10, C, 10, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT11, C, 11, GPIO_KB_OUTPUT, NULL) |
| GPIO(KB_OUT12, C, 12, GPIO_KB_OUTPUT, NULL) |
| GPIO(USB_VBUS_CTRL, C, 13, GPIO_OUT_LOW, NULL) |
| GPIO(HUB_RESET, C, 14, GPIO_ODR_HIGH, NULL) |
| GPIO(WP_L, D, 2, GPIO_INPUT, NULL) |
| |
| /* |
| * TODO(crosbug.com/p/23494): This will be an alternate function GPIO, |
| * so remove it from here. |
| */ |
| GPIO(BL_PWM, A, 1, GPIO_OUTPUT, NULL) |
| |
| /* Unimplemented signals which we need to emulate for now */ |
| UNIMPLEMENTED(EC_INT) |
| UNIMPLEMENTED(ENTERING_RW) |
| |
| #if 0 |
| /* Other GPIOs (probably need to be set up below as alt. function) */ |
| GPIO(STM_USBDM, A, 11, GPIO_DEFAULT, NULL) |
| GPIO(STM_USBDP, A, 12, GPIO_DEFAULT, NULL) |
| GPIO(JTMS_SWDIO, A, 13, GPIO_DEFAULT, NULL) |
| GPIO(JTCK_SWCLK, A, 14, GPIO_DEFAULT, NULL) |
| GPIO(JTDI, A, 15, GPIO_DEFAULT, NULL) |
| GPIO(JTDO, B, 3, GPIO_DEFAULT, NULL) |
| GPIO(JNTRST, B, 4, GPIO_DEFAULT, NULL) |
| GPIO(OSC32_OUT, C, 15, GPIO_DEFAULT, NULL) |
| #endif |
