blob: ae7cf7a14a5f70f12bd4c1fb02d1337e5a3c72d8 [file] [log] [blame]
/* Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* X86 haswell chipset power control module for Chrome EC */
#include "chipset.h"
#include "common.h"
#include "console.h"
#include "ec_commands.h"
#include "gpio.h"
#include "hooks.h"
#include "host_command.h"
#include "lid_switch.h"
#include "power.h"
#include "system.h"
#include "timer.h"
#include "util.h"
#include "wireless.h"
/* Console output macros */
#define CPUTS(outstr) cputs(CC_CHIPSET, outstr)
#define CPRINTS(format, args...) cprints(CC_CHIPSET, format, ## args)
/* Input state flags */
#define IN_PGOOD_PP5000 POWER_SIGNAL_MASK(X86_PGOOD_PP5000)
#define IN_PGOOD_PP1350 POWER_SIGNAL_MASK(X86_PGOOD_PP1350)
#define IN_PGOOD_PP1050 POWER_SIGNAL_MASK(X86_PGOOD_PP1050)
#define IN_PGOOD_VCORE POWER_SIGNAL_MASK(X86_PGOOD_VCORE)
#define IN_SLP_S0_DEASSERTED POWER_SIGNAL_MASK(X86_SLP_S0_DEASSERTED)
#define IN_SLP_S3_DEASSERTED POWER_SIGNAL_MASK(X86_SLP_S3_DEASSERTED)
#define IN_SLP_S5_DEASSERTED POWER_SIGNAL_MASK(X86_SLP_S5_DEASSERTED)
#define IN_SLP_SUS_DEASSERTED POWER_SIGNAL_MASK(X86_SLP_SUS_DEASSERTED)
/* All always-on supplies */
#define IN_PGOOD_ALWAYS_ON (IN_PGOOD_PP5000)
/* All non-core power rails */
#define IN_PGOOD_ALL_NONCORE (IN_PGOOD_PP1350 | IN_PGOOD_PP1050)
/* All core power rails */
#define IN_PGOOD_ALL_CORE (IN_PGOOD_VCORE)
/* Rails required for S3 */
#define IN_PGOOD_S3 (IN_PGOOD_ALWAYS_ON | IN_PGOOD_PP1350)
/* Rails required for S0 */
#define IN_PGOOD_S0 (IN_PGOOD_ALWAYS_ON | IN_PGOOD_ALL_NONCORE)
/* All PM_SLP signals from PCH deasserted */
#define IN_ALL_PM_SLP_DEASSERTED (IN_SLP_S3_DEASSERTED | \
IN_SLP_S5_DEASSERTED)
/* All inputs in the right state for S0 */
#define IN_ALL_S0 (IN_PGOOD_ALWAYS_ON | IN_PGOOD_ALL_NONCORE | \
IN_PGOOD_ALL_CORE | IN_ALL_PM_SLP_DEASSERTED)
static int throttle_cpu; /* Throttle CPU? */
static int pause_in_s5; /* Pause in S5 when shutting down? */
void chipset_force_shutdown(void)
{
CPRINTS("%s()", __func__);
/*
* Force power off. This condition will reset once the state machine
* transitions to G3.
*/
gpio_set_level(GPIO_PCH_DPWROK, 0);
gpio_set_level(GPIO_PCH_RSMRST_L, 0);
}
void chipset_reset(int cold_reset)
{
CPRINTS("%s(%d)", __func__, cold_reset);
if (cold_reset) {
/*
* Drop and restore PWROK. This causes the PCH to reboot,
* regardless of its after-G3 setting. This type of reboot
* causes the PCH to assert PLTRST#, SLP_S3#, and SLP_S5#, so
* we actually drop power to the rest of the system (hence, a
* "cold" reboot).
*/
/* Ignore if PWROK is already low */
if (gpio_get_level(GPIO_PCH_PWROK) == 0)
return;
/* PWROK must deassert for at least 3 RTC clocks = 91 us */
gpio_set_level(GPIO_PCH_PWROK, 0);
udelay(100);
gpio_set_level(GPIO_PCH_PWROK, 1);
} else {
/*
* Send a RCIN# pulse to the PCH. This just causes it to
* assert INIT# to the CPU without dropping power or asserting
* PLTRST# to reset the rest of the system. Pulse must be at
* least 16 PCI clocks long = 500 ns.
*/
/*
* The gpio pin used by the EC (PL6) does not behave in the
* correct manner when configured as open drain. In order to
* mimic open drain, the pin is initially configured as an
* input. When it is needed to drive low, the flags are
* updated which changes the pin to an output and drives the
* pin low. Note that this logic will work fine even on boards
* where RCIN# has been moved to a different pin, so there's no
* need to #ifdef this behavior. See crosbug.com/p/20173.
*/
gpio_set_flags(GPIO_PCH_RCIN_L, GPIO_OUT_LOW);
udelay(10);
gpio_set_flags(GPIO_PCH_RCIN_L, GPIO_INPUT);
}
}
void chipset_throttle_cpu(int throttle)
{
if (chipset_in_state(CHIPSET_STATE_ON))
gpio_set_level(GPIO_CPU_PROCHOT, throttle);
}
enum power_state power_chipset_init(void)
{
/* Enable interrupts for our GPIOs */
gpio_enable_interrupt(GPIO_PCH_EDP_VDD_EN);
/*
* If we're switching between images without rebooting, see if the x86
* is already powered on; if so, leave it there instead of cycling
* through G3.
*/
if (system_jumped_to_this_image()) {
if ((power_get_signals() & IN_ALL_S0) == IN_ALL_S0) {
/* Disable idle task deep sleep when in S0. */
disable_sleep(SLEEP_MASK_AP_RUN);
CPRINTS("already in S0");
return POWER_S0;
} else {
/* Force all signals to their G3 states */
CPRINTS("forcing G3");
gpio_set_level(GPIO_PCH_PWROK, 0);
gpio_set_level(GPIO_VCORE_EN, 0);
gpio_set_level(GPIO_SUSP_VR_EN, 0);
gpio_set_level(GPIO_PP1350_EN, 0);
gpio_set_level(GPIO_EC_EDP_VDD_EN, 0);
gpio_set_level(GPIO_PP3300_DX_EN, 0);
gpio_set_level(GPIO_PP5000_EN, 0);
gpio_set_level(GPIO_PCH_RSMRST_L, 0);
gpio_set_level(GPIO_PCH_DPWROK, 0);
wireless_set_state(WIRELESS_OFF);
}
}
return POWER_G3;
}
enum power_state power_handle_state(enum power_state state)
{
switch (state) {
case POWER_G3:
break;
case POWER_S5:
if (gpio_get_level(GPIO_PCH_SLP_S5_L) == 1)
return POWER_S5S3; /* Power up to next state */
break;
case POWER_S3:
/*
* If lid is closed; hold touchscreen in reset to cut power
* usage. If lid is open, take touchscreen out of reset so it
* can wake the processor. Chipset task is awakened on lid
* switch transitions.
*/
gpio_set_level(GPIO_TOUCHSCREEN_RESET_L, lid_is_open());
/* Check for state transitions */
if (!power_has_signals(IN_PGOOD_S3)) {
/* Required rail went away */
chipset_force_shutdown();
return POWER_S3S5;
} else if (gpio_get_level(GPIO_PCH_SLP_S3_L) == 1) {
/* Power up to next state */
return POWER_S3S0;
} else if (gpio_get_level(GPIO_PCH_SLP_S5_L) == 0) {
/* Power down to next state */
return POWER_S3S5;
}
break;
case POWER_S0:
if (!power_has_signals(IN_PGOOD_S0)) {
/* Required rail went away */
chipset_force_shutdown();
return POWER_S0S3;
} else if (gpio_get_level(GPIO_PCH_SLP_S3_L) == 0) {
/* Power down to next state */
return POWER_S0S3;
}
break;
case POWER_G3S5:
/*
* Wait 10ms after +3VALW good, since that powers VccDSW and
* VccSUS.
*/
msleep(10);
/* Assert DPWROK */
gpio_set_level(GPIO_PCH_DPWROK, 1);
if (power_wait_signals(IN_SLP_SUS_DEASSERTED)) {
chipset_force_shutdown();
return POWER_G3;
}
gpio_set_level(GPIO_SUSP_VR_EN, 1);
if (power_wait_signals(IN_PGOOD_PP1050)) {
gpio_set_level(GPIO_SUSP_VR_EN, 0);
chipset_force_shutdown();
return POWER_G3;
}
/* Deassert RSMRST# */
gpio_set_level(GPIO_PCH_RSMRST_L, 1);
/* Wait 5ms for SUSCLK to stabilize */
msleep(5);
return POWER_S5;
case POWER_S5S3:
/* Enable PP5000 (5V) rail. */
gpio_set_level(GPIO_PP5000_EN, 1);
if (power_wait_signals(IN_PGOOD_PP5000)) {
chipset_force_shutdown();
return POWER_S5G3;
}
/* Wait for the always-on rails to be good */
if (power_wait_signals(IN_PGOOD_ALWAYS_ON)) {
chipset_force_shutdown();
return POWER_S5G3;
}
/* Turn on power to RAM */
gpio_set_level(GPIO_PP1350_EN, 1);
if (power_wait_signals(IN_PGOOD_S3)) {
chipset_force_shutdown();
return POWER_S5G3;
}
/*
* Enable touchpad power so it can wake the system from
* suspend.
*/
gpio_set_level(GPIO_ENABLE_TOUCHPAD, 1);
/* Call hooks now that rails are up */
hook_notify(HOOK_CHIPSET_STARTUP);
return POWER_S3;
case POWER_S3S0:
/* Turn on power rails */
gpio_set_level(GPIO_PP3300_DX_EN, 1);
/* Enable wireless */
wireless_set_state(WIRELESS_ON);
/*
* Make sure touchscreen is out if reset (even if the lid is
* still closed); it may have been turned off if the lid was
* closed in S3.
*/
gpio_set_level(GPIO_TOUCHSCREEN_RESET_L, 1);
/* Wait for non-core power rails good */
if (power_wait_signals(IN_PGOOD_S0)) {
chipset_force_shutdown();
wireless_set_state(WIRELESS_OFF);
gpio_set_level(GPIO_EC_EDP_VDD_EN, 0);
gpio_set_level(GPIO_PP3300_DX_EN, 0);
gpio_set_level(GPIO_TOUCHSCREEN_RESET_L, 0);
return POWER_S3;
}
/*
* Enable +CPU_CORE. The CPU itself will request the supplies
* when it's ready.
*/
gpio_set_level(GPIO_VCORE_EN, 1);
/* Call hooks now that rails are up */
hook_notify(HOOK_CHIPSET_RESUME);
/*
* Disable idle task deep sleep. This means that the low
* power idle task will not go into deep sleep while in S0.
*/
disable_sleep(SLEEP_MASK_AP_RUN);
/* Wait 99ms after all voltages good */
msleep(99);
/*
* Throttle CPU if necessary. This should only be asserted
* when +VCCP is powered (it is by now).
*/
gpio_set_level(GPIO_CPU_PROCHOT, throttle_cpu);
/* Set PCH_PWROK */
gpio_set_level(GPIO_PCH_PWROK, 1);
gpio_set_level(GPIO_SYS_PWROK, 1);
return POWER_S0;
case POWER_S0S3:
/* Call hooks before we remove power rails */
hook_notify(HOOK_CHIPSET_SUSPEND);
/* Clear PCH_PWROK */
gpio_set_level(GPIO_SYS_PWROK, 0);
gpio_set_level(GPIO_PCH_PWROK, 0);
/* Wait 40ns */
udelay(1);
/* Disable +CPU_CORE */
gpio_set_level(GPIO_VCORE_EN, 0);
/* Suspend wireless */
wireless_set_state(WIRELESS_SUSPEND);
/*
* Enable idle task deep sleep. Allow the low power idle task
* to go into deep sleep in S3 or lower.
*/
enable_sleep(SLEEP_MASK_AP_RUN);
/*
* Deassert prochot since CPU is off and we're about to drop
* +VCCP.
*/
gpio_set_level(GPIO_CPU_PROCHOT, 0);
/* Turn off power rails */
gpio_set_level(GPIO_EC_EDP_VDD_EN, 0);
gpio_set_level(GPIO_PP3300_DX_EN, 0);
return POWER_S3;
case POWER_S3S5:
/* Call hooks before we remove power rails */
hook_notify(HOOK_CHIPSET_SHUTDOWN);
/* Disable wireless */
wireless_set_state(WIRELESS_OFF);
/* Disable touchpad power */
gpio_set_level(GPIO_ENABLE_TOUCHPAD, 0);
/* Turn off power to RAM */
gpio_set_level(GPIO_PP1350_EN, 0);
/* Disable PP5000 (5V) rail. */
gpio_set_level(GPIO_PP5000_EN, 0);
/* Start shutting down */
return pause_in_s5 ? POWER_S5 : POWER_S5G3;
case POWER_S5G3:
/* Deassert DPWROK, assert RSMRST# */
gpio_set_level(GPIO_PCH_DPWROK, 0);
gpio_set_level(GPIO_PCH_RSMRST_L, 0);
gpio_set_level(GPIO_SUSP_VR_EN, 0);
return POWER_G3;
}
return state;
}
void power_interrupt(enum gpio_signal signal)
{
/* Pass through eDP VDD enable from PCH */
gpio_set_level(GPIO_EC_EDP_VDD_EN, gpio_get_level(GPIO_PCH_EDP_VDD_EN));
}
static int host_command_gsv(struct host_cmd_handler_args *args)
{
const struct ec_params_get_set_value *p = args->params;
struct ec_response_get_set_value *r = args->response;
if (p->flags & EC_GSV_SET)
pause_in_s5 = p->value;
r->value = pause_in_s5;
args->response_size = sizeof(*r);
return EC_RES_SUCCESS;
}
DECLARE_HOST_COMMAND(EC_CMD_GSV_PAUSE_IN_S5,
host_command_gsv,
EC_VER_MASK(0));
static int console_command_gsv(int argc, char **argv)
{
if (argc > 1 && !parse_bool(argv[1], &pause_in_s5))
return EC_ERROR_INVAL;
ccprintf("pause_in_s5 = %s\n", pause_in_s5 ? "on" : "off");
return EC_SUCCESS;
}
DECLARE_CONSOLE_COMMAND(pause_in_s5, console_command_gsv,
"[on|off]",
"Should the AP pause in S5 during shutdown?",
NULL);