/* -*- mode:c -*-
 *
 * Copyright 2014 The ChromiumOS Authors
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/**
 * @file gpio.wrap
 * @brief Include the board specific *gpio.inc* file.
 *
 * This file is included in many different contexts.
 * The macros defined outside of the file (before including)
 * determine what parts of *gpio.inc* will be emitted.
 *
 * The following macros are available:
 * - GPIO_INT
 * - GPIO
 * - IOEX_INT
 * - IOEX
 * - UNIMPLEMENTED
 * - ALTERNATE
 * - UNUSED
 *
 * @note You cannot have dependencies between these macros. For example,
 *       you cannot define GPIO_INT in terms of GPIO. All macros must be
 *       independently evaluable.
 *       This is due to the reorganization mechanism at the bottom of this file.
 *
 * @see include/gpio_list.h
 * @see common/gpio.c
 * @see include/gpio_signal.h
 */

#ifndef GPIO_PIN
#error "Your architecture must define GPIO_PIN and it did not."
#endif

#ifndef GPIO_PIN_MASK
#error "Your architecture must define GPIO_PIN_MASK and it did not."
#endif

/**
 * @def GPIO
 * @brief The GPIO macro defines a GPIO pin name and function.
 *
 * The name is used to populate the gpio_signal enum by first
 * prepending GPIO_ to the name.  It is also used to construct the
 * string name that is presented in the shell interface.  The pin
 * parameter should use PIN macro and will be expand to GPIO_PIN
 * defined on each board.  The flags parameter is passed on to the
 * gpio_info directly.
 */
#ifndef GPIO
#define GPIO(name, pin, flags)
#endif

/**
 * @def GPIO_INT
 * @brief The GPIO_INT macro defines a GPIO that has an IRQ handler.
 *
 * The IRQ handler pointers are stored as elements in the gpio_irq_handlers
 * array.
 */
#ifndef GPIO_INT
#define GPIO_INT(name, pin, flags, signal)
#endif

/**
 * @def ALTERNATE
 * @brief The ALTERNATE macro associates a GPIO with an alternate function.
 *
 * Alternate functions allow hardware peripherals access to GPIO pins.
 * Modules use gpio_config_module to enable and disable the alternate functions
 * of GPIOs assigned to that module.  So if the module parameter is MODULE_UART
 * then when the uart_init function is called the GPIO will be switched to its
 * alternate function mode.  The function parameter is chip/variant specific
 * and will usually need to be looked up in the datasheet.  The flags parameter
 * has the same meaning as in the GPIO macro above.  This macro can assign
 * multiple pins on the same port to a module, pinmasks should use PIN_MASK
 * and will be expanded as GPIO_PIN_MASK defined in each config_chip.h.
 */
#ifndef ALTERNATE
#define ALTERNATE(pinmask, function, module, flags)
#endif

/**
 * @def UNIMPLEMENTED
 * @brief The UNIMPLEMENTED macro defines a GPIO that doesn't actually exist.
 *
 * Some GPIO names are well known and used by generic code, ENTERING_RW and WP_L
 * are examples.  If a particular board doesn't have a GPIO assigned to such a
 * function/name then it should specify that that GPIO is not implemented using
 * the UNIMPLEMENTED macro below in the board gpio.inc file.  This macro creates
 * an entry in the gpio_signal enum and the gpio_list array that is initialized
 * to use the UNIMPLEMENTED_GPIO_BANK and a bitmask of zero.  The chip GPIO
 * layer is implemented such that writes to and reads from
 * UNIMPLEMENTED_GPIO_BANK with a bitmask of zero are harmless.
 *
 * This allows common code that expects these GPIOs to exist to compile and have
 * some reduced functionality.
 */
#ifndef UNIMPLEMENTED
#define UNIMPLEMENTED(name)
#endif

/**
 * @def UNUSED
 * @brief The UNUSED macro defines a pin as unused.
 *
 * This allows the chip specific code to provision these pins for
 * the lowest power state.
 * We don't want to automatically provision all unreferenced pins/ports
 * as unused, since this may alter the behavior of existing firmwares in
 * ways that may not be obvious to the developer.
 */
#ifndef UNUSED
#define UNUSED(pin)
#endif

/**
 * @def IOEX
 * @brief The IOEX macro defines an IO Expander GPIO.
 *
 * The name is used to populate enum ioex_signal by prepending "IOEX_".
 */
#ifndef IOEX
#define IOEX(name, expin, flags)
#endif

/**
 * @def IOEX_INT
 * @brief The IOEX_INT macro defines an IO Expander GPIO that has an IRQ handler.
 *
 * The IRQ handler pointers are stored as elements in the ioex_irq_handlers
 * array.
 */
#ifndef IOEX_INT
#define IOEX_INT(name, expin, flags, handler)
#endif

/*
 * RO/RW pin macro.
 *
 * Some boards may have very different pin configurations between RO and RW, and
 * also may vary from revision to revision. The RO/RW pin macros can ease the
 * maintenance effort.
 */

#ifdef SECTION_IS_RO
#define GPIO_RO(name, pin, flags) GPIO(name, pin, flags)
#define GPIO_RW(name, pin, flags)
#define GPIO_INT_RO(name, pin, flags, signal) GPIO_INT(name, pin, flags, signal)
#define GPIO_INT_RW(name, pin, flags, signal)
#define ALTERNATE_RO(pinmask, function, module, flags) \
		ALTERNATE(pinmask, function, module, flags)
#define ALTERNATE_RW(pinmask, function, module, flags)
#define UNIMPLEMENTED_RO(name) UNIMPLEMENTED(name)
#define UNIMPLEMENTED_RW(name)
#define UNUSED_RO(name) UNUSED(name)
#define UNUSED_RW(name)
#elif defined(SECTION_IS_RW)
#define GPIO_RO(name, pin, flags)
#define GPIO_RW(name, pin, flags) GPIO(name, pin, flags)
#define GPIO_INT_RO(name, pin, flags, signal)
#define GPIO_INT_RW(name, pin, flags, signal) GPIO_INT(name, pin, flags, signal)
#define ALTERNATE_RO(pinmask, function, module, flags)
#define ALTERNATE_RW(pinmask, function, module, flags) \
		ALTERNATE(pinmask, function, module, flags)
#define UNIMPLEMENTED_RO(name)
#define UNIMPLEMENTED_RW(name) UNIMPLEMENTED(name)
#define UNUSED_RO(name)
#define UNUSED_RW(name) UNUSED(name)
#else
#define GPIO_RO(name, pin, flags) GPIO(name, pin, flags)
#define GPIO_RW(name, pin, flags) GPIO(name, pin, flags)
#define GPIO_INT_RO(name, pin, flags, signal) GPIO_INT(name, pin, flags, signal)
#define GPIO_INT_RW(name, pin, flags, signal) GPIO_INT(name, pin, flags, signal)
#define ALTERNATE_RO(pinmask, function, module, flags) \
		ALTERNATE(pinmask, function, module, flags)
#define ALTERNATE_RW(pinmask, function, module, flags) \
		ALTERNATE(pinmask, function, module, flags)
#define UNIMPLEMENTED_RO(name) UNIMPLEMENTED(name)
#define UNIMPLEMENTED_RW(name) UNIMPLEMENTED(name)
#define UNUSED_RO(name) UNUSED(name)
#define UNUSED_RW(name) UNUSED(name)
#endif


/**
 * Rearrange the gpio.inc declarations, such that we have the following order:
 * - GPIO_INTs
 * - GPIOs
 * - IOEX_INTs
 * - IOEXs
 * - UNIMPLEMENTEDs
 * - ALTERNATEs
 * - UNUSEDs
 *
 * This allows the board to define these declaration in any way that is
 * makes logical sense, while maintaining the following existing
 * order invariants:
 *
 * - GPIO_INTs must be before GPIOs in gpio.inc. This is because their
 *   enum values from gpio_signal.h are used as the index to the
 *   gpio_irq_handlers table.
 *   See crrev.com/c/263973 (gpio: Refactor IRQ handler pointer out of gpio_list)
 * - IOEX_INTs must be before IOEXs in gpio.inc. This is because their
 *   enum values from gpio_signal.h are used as the index to the
 *   ioex_irq_handlers table.
 *
 * We want to rearrange the entres early in the gpio.inc process to ensure
 * that all includers (gpio_signal.h and gpio_list.h) see the same ordering,
 * since there is an implicit dependency.
 *
 * Note that this mechanism cannot handle dependencies between the provided
 * macros. See the file header comment for more information.
 */

/* Stash away all macros and define to "blank" */
#pragma push_macro("GPIO_INT")
#pragma push_macro("GPIO")
#pragma push_macro("IOEX_INT")
#pragma push_macro("IOEX")
#pragma push_macro("UNIMPLEMENTED")
#pragma push_macro("ALTERNATE")
#pragma push_macro("UNUSED")
#undef GPIO_INT
#undef GPIO
#undef IOEX_INT
#undef IOEX
#undef UNIMPLEMENTED
#undef ALTERNATE
#undef UNUSED
#define GPIO_INT(...)
#define GPIO(...)
#define IOEX_INT(...)
#define IOEX(...)
#define UNIMPLEMENTED(...)
#define ALTERNATE(...)
#define UNUSED(...)

/* Capture GPIO_INTs */
#pragma pop_macro("GPIO_INT")
#include "gpio.inc"
#undef GPIO_INT
#define GPIO_INT(...)

/* Capture GPIOs */
#pragma pop_macro("GPIO")
#include "gpio.inc"
#undef GPIO
#define GPIO(...)

/* Capture IOEX_INTs */
#pragma pop_macro("IOEX_INT")
#include "gpio.inc"
#undef IOEX_INT
#define IOEX_INT(...)

/* Capture IOEXs */
#pragma pop_macro("IOEX")
#include "gpio.inc"
#undef IOEX
#define IOEX(...)

/* Capture UNIMPLEMENTEDs */
#pragma pop_macro("UNIMPLEMENTED")
#include "gpio.inc"
#undef UNIMPLEMENTED
#define UNIMPLEMENTED(...)

/* Capture ALTERNATEs */
#pragma pop_macro("ALTERNATE")
#include "gpio.inc"
#undef ALTERNATE
#define ALTERNATE(...)

/* Capture UNUSEDs */
#pragma pop_macro("UNUSED")
#include "gpio.inc"
#undef UNUSED
#define UNUSED(...)


/*
 * Once the gpio.inc file has been included these macros are no longer needed.
 * This allows the includer to redefine these macros and include this file
 * again, within the same file.
 */
#undef GPIO
#undef GPIO_RO
#undef GPIO_RW
#undef GPIO_INT
#undef GPIO_INT_RO
#undef GPIO_INT_RW
#undef IOEX
#undef IOEX_INT
#undef ALTERNATE
#undef ALTERNATE_RO
#undef ALTERNATE_RW
#undef UNIMPLEMENTED
#undef UNIMPLEMENTED_RO
#undef UNIMPLEMENTED_RW
#undef UNUSED
#undef UNUSED_RO
#undef UNUSED_RW