If your board includes an EEPROM to store CBI, then this feature must be enabled and configured. Note that the I2C buses must be configured and working before enabling CBI.
Add the following config options to baseboard.h
or board.h
.
CONFIG_BOARD_VERSION_CBI
CONFIG_CROS_BOARD_INFO
I2C_ADDR_EEPROM_FLAGS <7-bit addr>
- Defines the 7-bit slave address for the EEPROM containing CBI.None needed - the I2C pins should be configured automatically when initializing the I2C buses.
None required by this feature.
None required by this feature.
Refer to the I2C debugging information to verify communication with the CBI EEPROM.