| { |
| "platform": null, |
| "platform.DOC": "Name of the board or model being tested", |
| |
| "parent": null, |
| "parent.DOC": "Name of the platform whose overrides to inherit", |
| |
| "models": {}, |
| "models.DOC": "Model-specific attribute overrides for this platform. This field should not be used in a parent config.", |
| |
| "mode_switcher_type": "menu_switcher", |
| "mode_switcher_type.DOC": "Version of mode-switcher used for mode-aware reboot", |
| |
| "is_detachable": false, |
| "is_detachable.DOC": "Whether the device is a detachable", |
| |
| "chrome_ec": false, |
| "chrome_ec.DOC": "Whether the platform has an EC", |
| |
| "ec_ro_vbus_bug": false, |
| "ec_ro_vbus_bug.DOC": "Whether The EC RO firmware has a bug that causes Vbus is not supplied in SRC.ACCESORY state", |
| |
| "chrome_usbpd": false, |
| "chrome_usbpd.DOC": "Whether the platform supports USB power delivery", |
| |
| "dark_resume_capable": false, |
| "dark_resume_capable.DOC": "Whether the platform supports dark-resume", |
| |
| "has_lid": true, |
| "has_lid.DOC": "Whether the platform has a physical lid", |
| |
| "has_keyboard": true, |
| "has_keyboard.DOC": "Whether the platform has a physical keyboard", |
| |
| "has_powerbutton": true, |
| "has_powerbutton.DOC": "Whether the platform has a physical power button", |
| |
| "power_button_dev_switch": false, |
| "power_button_dev_switch.DOC": "Whether the power button switches to dev mode", |
| |
| "rec_button_dev_switch": false, |
| "rec_button_dev_switch.DOC": "Whether the recovery button switches to dev mode", |
| |
| "ec_capability": [], |
| "ec_capability.DOC": "List of capabilities of the Chrome EC", |
| |
| "cr50_capability": [], |
| "cr50_capability.DOC": "List of capabilities of the CR50", |
| |
| "custom_usb_enable_pins": [], |
| "custom_usb_enable_pins.DOC": "List of USB-A enable GPIO pin names with optional io expander flags", |
| |
| "spi_voltage": "pp1800", |
| "spi_voltage.DOC": "The voltage level to set on the servo's spi2_vref", |
| |
| "usbc_input_voltage_limit": 20, |
| "usbc_input_voltage_limit.DOC": "The max input voltage for USB Type-C port", |
| |
| "charger_profile_override": false, |
| "charger_profile_override.DOC": "Whether the platform has a custom charger profile, which takes over the control of voltage/current limit", |
| |
| "has_eventlog": true, |
| "has_eventlog.DOC": "Whether the platform has eventlog support including proper timestamps. (Only for old boards! Never disable this 'temporarily, until we get around to implementing it'!)", |
| |
| "firmware_screen": 10, |
| "firmware_screen.DOC": "Delay between power-on and firmware screen", |
| |
| "delay_powerinfo_stable": 0, |
| "delay_powerinfo_stable.DOC": "Delay between AP power-on and when powerinfo is stable. Some CPUs have an internal reset that transitions through different power states.", |
| |
| "delay_reboot_to_ping": 30, |
| "delay_reboot_to_ping.DOC": "Delay between reboot and first ping response from the DUT. When this times out, it indicates we're stuck at a firmware screen. Hence, bypass action has to be taken if we want to proceed.", |
| |
| "keypress_delay": 0.2, |
| "keypress_delay.DOC": "Delay between keypresses in firmware screen", |
| |
| "dev_screen_timeout": 30, |
| "dev_screen_timeout.DOC": "The developer screen timeout fits our spec", |
| |
| "usb_plug": 10, |
| "usb_plug.DOC": "Delay between power-on and plug USB", |
| |
| "usb_unplug": 2, |
| "usb_unplug.DOC": "Delay between USB power-off and detected by the system", |
| |
| "shutdown": 30, |
| "shutdown.DOC": "Delay for waiting for client to shutdown", |
| |
| "shutdown_timeout": 60, |
| "shutdown_timeout.DOC": "Timeout of confirming DUT shutdown", |
| |
| "ec_boot_to_console": 1.2, |
| "ec_boot_to_console.DOC": "Delay between EC boot and ChromeEC console functional", |
| |
| "ec_boot_to_pwr_button": 0.5, |
| "ec_boot_to_pwr_button.DOC": "Delay between EC boot and pressing power button", |
| |
| "ec_boot_to_wp_en": 0, |
| "ec_boot_to_wp_en.DOC": "Delay for AP initiating an EC reboot in order to enable EC WP", |
| |
| "hibernate": true, |
| "hibernate.DOC": "True if the device supports hibernation", |
| |
| "ec_has_powerbtn_cmd": true, |
| "ec_has_powerbtn_cmd.DOC": "EC, if present, supports 'powerbtn' console command", |
| |
| "ec_reboot_to_g3_delay": 0, |
| "ec_reboot_to_g3_delay.DOC": "Delay for waiting EC turning off the AP", |
| |
| "software_sync": 6, |
| "software_sync.DOC": "Delay of EC software sync hash calculating time", |
| |
| "software_sync_update": 2, |
| "software_sync_update.DOC": "Delay of EC software sync updating EC", |
| |
| "hold_pwr_button_poweroff": 5, |
| "hold_pwr_button_poweroff.DOC": "Duration of holding power button to power off DUT normally", |
| |
| "hold_pwr_button_nopowerd_shutdown": 11, |
| "hold_pwr_button_nopowerd_shutdown.DOC": "Duration of holding down power button to shut down without powerd", |
| |
| "hold_pwr_button_poweron": 0.2, |
| "hold_pwr_button_poweron.DOC": "Duration of holding power button to power on DUT normally (also known as SHORT_DELAY in hdctools)", |
| |
| "powerup_ready": 10, |
| "powerup_ready.DOC": "Delay after /sbin/shutdown before pressing power button", |
| |
| "servo_prog_state_delay": 0, |
| "servo_prog_state_delay.DOC": "Time in seconds to wait after changingt servo state for programming", |
| |
| "usb_image_boot_timeout": 180, |
| "usb_image_boot_timeout.DOC": "Timeout of confirming DUT doesn't boot on USB image in Recovery screen", |
| |
| "smm_store": true, |
| "smm_store.DOC": "Check SMMSTORE exists in FMap for x86 boards", |
| |
| "intel_cse_lite": false, |
| "intel_cse_lite.DOC": "Check if platform uses Intel CSE Lite firmware", |
| |
| "lid_wake_from_power_off": true, |
| "lid_wake_from_power_off.DOC": "True if the lid can wake the system from a powered off state", |
| |
| "ap_access_ec_flash": true, |
| "ap_access_ec_flash.DOC": "True if AP can access the EC flash while Chrome OS is running", |
| |
| "rec_force_mrc": true, |
| "rec_force_mrc.DOC": "True if the device supports power_state:rec_force_mrc, which forced memroy retraining in recovery mode", |
| |
| "gsc_can_wake_ec_with_reset": true, |
| "gsc_can_wake_ec_with_reset.DOC": "True if the GSC can wake the EC with its reset GPIO", |
| |
| "ap_up_after_cr50_reboot": true, |
| "ap_up_after_cr50_reboot.DOC": "True if AP is normally expected to be powered on after the Cr50 reboots (when AC power is connected)", |
| |
| "gsc_update_wait_for_reboot": 10, |
| "gsc_update_wait_for_reboot.DOC": "Number of seconds to wait for a gsc reboot after update", |
| |
| "ec_forwards_short_pp_press": false, |
| "ec_forwards_short_pp_press.DOC": "True if the EC will send short power button presses, such as those expected during CCD open, to the AP", |
| |
| "serial_number_length": 0, |
| "serial_number_length.DOC": "Length of serial number that can be set in firmware; if serial number cannot be set then 0", |
| |
| "has_diagnostics_image": false, |
| "has_diagnostics_image.DOC": "True if altfw/diag is build into RW_LEGACY", |
| |
| "clear_dev_on_rec": false, |
| "clear_dev_on_rec.DOC": "True if dev mode get cleared upon entering rec mode", |
| |
| "rma_entered_automatically": true, |
| "rma_entered_automatically.DOC": "True if the will go into serial number screen automatically", |
| |
| "dut_can_source_power_in_suspend": true, |
| "dut_can_source_power_in_suspend.DOC": "True if DUT will keep providing power to devices connected via USB-C when going to suspend", |
| |
| "usb_hid_wake_enabled": true, |
| "usb_hid_wake_enabled.DOC": "True if wake from USB HID is supported" |
| } |