// Copyright (c) 2013 The Chromium OS Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

syntax = "proto2";

option optimize_for = LITE_RUNTIME;

package power_manager;

// Power supply status sent from powerd to Chrome.
message PowerSupplyProperties {
  // For any of these power sources, the system may be consuming power at a high
  // enough rate that the battery is discharging rather than charging; see
  // BatteryState. See the PowerSource submessage's |type| field for more
  // details about the active power source.
  enum ExternalPower {
    // AC/line/mains or USB PD power is connected. This is typically the
    // highest-power source that can be attached to the system.
    AC = 0;

    // A low-power USB source (SDP, DCP, CDP, or ACA) is connected.
    USB = 1;

    // No external power source is connected.
    DISCONNECTED = 2;

    // Next value to use: 4
  }

  enum BatteryState {
    // The battery is full or close to full.
    FULL = 0;

    // The battery is being charged but is not yet full.
    CHARGING = 1;

    // The battery is discharging. Note that an external power source may be
    // connected but not supplying enough power to offset the system's
    // instantaneous power consumption. This state is also used if the battery
    // is neither charging nor discharging (i.e. current is zero) in a non-full
    // state, which may indicate a battery defect.
    DISCHARGING = 2;

    // The system doesn't have a battery.
    NOT_PRESENT = 3;

    // Next value to use: 4
  }

  // Details about a potential source of power to the system.
  message PowerSource {
    enum Port {
      // The location of the port is unknown, or there's only one port.
      UNKNOWN = 0;

      // Various positions on the device. The first word describes the side of
      // the device where the port is located while the second clarifies the
      // position. For example, LEFT_BACK means the farthest-back port on the
      // left side, while BACK_LEFT means the leftmost port on the back of the
      // device.
      LEFT        = 1;
      RIGHT       = 2;
      BACK        = 3;
      FRONT       = 4;
      LEFT_FRONT  = 5;
      LEFT_BACK   = 6;
      RIGHT_FRONT = 7;
      RIGHT_BACK  = 8;
      BACK_LEFT   = 9;
      BACK_RIGHT  = 10;

      // Next value to use: 11
    }

    enum Type {
      // Unspecified type.
      OTHER = 0;

      // Dedicated charger. Typically single-purpose and non-USB (e.g. barrel
      // jack plugs). Corresponds to kernel-reported type "Mains". This source
      // is reported by the ACPI driver and may also appear (along with a USB_PD
      // source) on Type-C-only systems if the ACPI driver is present.
      MAINS = 1;

      // USB Type-C, including dedicated Type-C chargers. Typically >= 7.5W.
      // Corresponds to kernel-reported types "USB_C", "USB_PD", "USB_PD_DRP",
      // and "BrickID".
      USB_C = 2;

      // USB Battery Charging r1.2. Typically <= 7.5W. Corresponds to
      // kernel-reported types "USB", "USB_ACA", "USB_CDP", and "USB_DCP".
      USB_BC_1_2 = 3;

      // Next value to use: 4
    }

    // Opaque ID corresponding to the device. Do not use this for any purpose
    // beyond comparisons with |external_power_source_id| or as an argument to
    // powerd's SetPowerSource D-Bus method.
    optional string id = 1;

    // The charging port to which this power source is connected.
    optional Port port = 7;

    // Power source type.
    optional Type type = 8;

    // Raw strings read from |manufacturer| and |model_name| files in sysfs.
    optional string manufacturer_id = 4;
    optional string model_id = 5;

    // Maximum power this source is capable of delivering, in watts.
    optional double max_power = 6;

    // True if the power source will automatically deliver charge to the system
    // when connected (assuming there isn't another |active_by_default| source
    // doing so). If false, the source will not deliver charge unless requested
    // to do so by the user.
    optional bool active_by_default = 3;

    // Next ID to use: 9
  }

  // Current state of the external power source.
  optional ExternalPower external_power = 14;

  // ID of the PowerSource that is currently providing power to the system.
  optional string external_power_source_id = 17;

  // Currently-connected external power sources.
  repeated PowerSource available_external_power_source = 18;

  // Current state of the battery.
  optional BatteryState battery_state = 15;

  // Estimated battery charge as a percent of its total capacity, in the
  // range [0.0, 100.0]. Unset if a battery isn't present.
  optional double battery_percent = 7 [default = -1.0];

  // Estimated time until the battery is empty, in seconds, or zero if the
  // battery isn't discharging. -1 if the estimated time would be huge
  // (e.g. because the current is zero or close to zero). Unset if a battery
  // isn't present.
  optional int64 battery_time_to_empty_sec = 5;

  // Estimated time until the battery is full, in seconds, or zero if the
  // battery isn't charging. -1 if the estimated time would be huge (e.g.
  // because the current is zero or close to zero). Unset if a battery isn't
  // present.
  optional int64 battery_time_to_full_sec = 6;

  // True when |battery_time_to_*| can't be trusted, e.g. because the power
  // source just changed. Unset if a battery isn't present.
  optional bool is_calculating_battery_time = 12 [default = false];

  // The battery discharge rate measured in W. Positive if the battery is being
  // discharged, negative if it's being charged, or unset if a battery isn't
  // present.
  optional double battery_discharge_rate = 16;

  // True if it is possible for some connected devices to function as either
  // sources or sinks (i.e. to either deliver or receive charge).
  optional bool supports_dual_role_devices = 19;

  // Next ID to use: 20
}