tree: 59e36e58b088d26027bc817efae5b518acb09e06 [path history] [tgz]
  1. html/
  2. init/
  3. mock-bin/
  4. power-button/
  5. .project_alias
  12. requirements.txt
  13. rsyslog.fpstudy-audit.conf

Fingerprint Study Tool

The fingerprint study tool allows you to capture raw fingerprint samples from study participants in order to analyze the performance of a fingerprint system.

See Typography conventions to understand what (outside), (inside), (in/out), and (device) mean.

Install/Run Fingerprint Study

  1. You can either install the fingerprint_study package on a chromebook in dev mode (Option 1) or build+flash a custom chrome os image with the fingerprint_study package preinstalled (Options 2).

    On the host, run the following commands:

    • Option 1

      (inside) $ BOARD=hatch
      (inside) $ DUT=dut1
      (inside) $ emerge-$BOARD fingerprint_study
      (inside) $ cros deploy $DUT fingerprint_study
    • Option 2

      (inside) $ BOARD=hatch
      (inside) $ USE=fpstudy ./build_packages --board=$BOARD
      (inside) $ ./build_image --board=$BOARD --noenable_rootfs_verification \
      (inside) $ cros flash usb:// $BOARD/latest

      Insert the USB flash drive into the chromebook boot from USB and then install the image.

  2. Configure FINGER_COUNT, ENROLLMENT_COUNT, and VERIFICATION_COUNT in /etc/init/fingerprint_study.conf with the proper fingerprint study parameters.

  3. Reboot the device.

  4. Navigate to in a web browser.

  5. Output fingerprint captures are stored by default in /var/lib/fingers. See /etc/init/fingerprint_study.conf.

Test on Host Using Mock ectool

We will use a python virtual environment to ensure proper dependency versions and a mock ectool in mock-bin. Note, the mock ectool will effectively emulate an immediate finger press when the study tool requests a finger press. This does not make use of the FPC python library.

  1. Run the following command:

    (in/out) $ ./
  2. Finally, navigate to in a web browser.

Setup GPG Encryption

The keys generated here are strictly for transmission and retrieval of data for a single Fingerprint Study run.

Generating Keys

Setting GNUPGHOME will force gpg to use a completely different keyring/config. In this case, we set it to an empty directory /tmp/fpstudygpg, where we will build a new keyring with only one key pair.

# Setup a new empty GNUPG directory.
(in/out) $ export GNUPGHOME=/tmp/fpstudygpg
(in/out) $ gio trash -f "${GNUPGHOME}" \
           && mkdir -p "${GNUPGHOME}/private-keys-v1.d" \
           && chmod -R 700 "${GNUPGHOME}"
# Setup key generation parameters.
(in/out) $ cat >keyparams <<EOF
    %echo Generating key.
    Key-Type: RSA
    Key-Length: 4096
    # Disable subkey generation, since this is a one time use key pair anyways.
    # Subkey-Type: RSA
    # Subkey-Length: 4096
    Name-Real: ChromeOSFPStudy
    Name-Comment: Chrome OS Fingerprint Study Key
    Expire-Date: 0
    # %no-ask-passphrase
    # %no-protection
    %echo Done.
# Generate a new key pair. Make note of the password used. This password is used
# to protect the private key and will be required when decrypting the captures.
(in/out) $ gpg --verbose --batch --gen-key ./keyparams
# Record the fingerprint/keyid from by the following command.
# The fingerprint is the 40 hex character string grouped into 10 groups of
# 4 characters. Remove the spaces from this fingerprint to form the keyid.
(in/out) $ gpg --fingerprint ChromeOSFPStudy
# Export only the public key for the test device. This key must be copied to the
# test device and will be used as the keyring.
(in/out) $ gpg --verbose --export ChromeOSFPStudy > "${GNUPGHOME}/chromeos-fpstudy-public-device.gpg"
# Export the private key for backup. This key is for the recipient to be able
# to decrypt the fingerprint capture.
# This key must NOT be copied to the test device.
(in/out) $ gpg --verbose --export-secret-keys ChromeOSFPStudy > "${GNUPGHOME}/chromeos-fpstudy-private.gpg"

Install Keys on Device

  • Copy the chromeos-fpstudy-public-device.gpg file to the test device.

    scp "${GNUPGHOME}/chromeos-fpstudy-public-device.gpg" \
    ssh dut1 chmod u=r,g=,o= \
  • Edit the /etc/init/fingerprint_study.conf file to have the following additional arguments to exec study_serve.

    • --gpg-keyring /var/lib/fpstudygnupg/chromeos-fpstudy-public-device.gpg
    • --gpg-recipients KEYID where KEYID is the keyid recorded in the Generating Keys section.

Test Encryption Manually

Follow the Generating Keys section and then run the following commands:

(in/out) $ GNUPGHOME_KEYGEN=/tmp/fpstudygpg
# Unfortunately, you still need a proper homedir for gpg to work.
(in/out) $ export GNUPGHOME=/tmp/fpstudygpg-host
(in/out) $ gio trash -f "${GNUPGHOME}" \
             && mkdir -p "${GNUPGHOME}/private-keys-v1.d" \
             && chmod -R 700 "${GNUPGHOME}"

# Test encrypting a sequence of numbers using only the public key.
(in/out) $ gpg --verbose --no-default-keyring \
             --keyring \
             "${GNUPGHOME_KEYGEN}/chromeos-fpstudy-public-device.gpg" \
             --trust-model always \
             -ear ChromeOSFPStudy > test-output.gpg < <(seq 10)
(in/out) $ file test-output.gpg
(in/out) $ gpg --list-packets test-output.gpg

# We will now import the private key to our clean GNUPHHOME.
# In order to test the above encryption step again, you would need to
# clear the GNUPGHOME directory (run these test instructions from the top).
(in/out) $ gpg --import "${GNUPGHOME_KEYGEN}/chromeos-fpstudy-private.gpg"
# The following should yield a sequence of number from 1 to 10.
(in/out) $ gpg -d test-output.gpg

Test Encryption Using Host

Follow the Generating Keys section and then run the following commands:

(in/out) $ ./ \
             --gpg-keyring "${GNUPGHOME}/chromeos-fpstudy-public-device.gpg" \
             --gpg-recipients ChromeOSFPStudy

Decrypting Fingerprint Captures

To decrypt the fingerprint captures on the receiving/host side, you must import the private key chromeos-fpstudy-private.gpg generated above in the Generating Keys section.

If you do not want to import the private key into your normal gpg homedir, you can run the following to create a temporary gpg homedir:

(in/out) $ export GNUPGHOME=/tmp/fpstudygpg-host
(in/out) $ gio trash -f "${GNUPGHOME}" \
           && mkdir -m 700 -p "${GNUPGHOME}/private-keys-v1.d"
# Import the private key into the current gpg homedir.
(in/out) $ gpg --import chromeos-fpstudy-private.gpg
# Decrypt all fingerprint captures, while place the decrypted file version
# alongside the encrypted version.
(in/out) $ find ./fpstudy-fingers -type f -name '*.gpg' | \
             xargs -P $(nproc) gpg --decrypt-files

Running Fingerprint Study Using Python Virtualenv

This is an alternative method to install the fingerprint study tool on a test device. It bypasses the Chrome OS/Gentoo dependencies and allows using providing a clean virtualenv for the execution on the test device.

1) Build python3 virtual environment bundle

# Optionally, you can build the virtual environment in a Docker container.
# docker run -v$HOME/Downloads:/Downloads -it debian
# On Debian, ensure that git, python3, python3-pip, and virtualenv are installed.
(outside) $ sudo apt update && apt install git python3 python3-pip virtualenv
# Grab the fingerprint study tool source
(outside) $ git clone
# Create an isolated python3 environment
(outside) $ virtualenv -p python3 /tmp/fpstudy-virtualenv
(outside) $ . /tmp/fpstudy-virtualenv/bin/activate
# Install fingerprint study dependencies
(outside) $ pip3 install -r platform2/biod/study/requirements.txt
# Copy the fingerprint study source
(outside) $ cp -r platform2/biod/study /tmp/fpstudy-virtualenv
# Bundle the virtual environment with study source
(outside) $ tar -C /tmp -czvf /tmp/fpstudy-virtualenv.tar.gz fpstudy-virtualenv
# For Docker with Downloads volume shared, run the following command:
# cp /tmp/fpstudy-virtualenv.tar.gz /Downloads/

The output of these steps is the fpstudy-virtualenv.tar.gz archive.

2) Enable developer mode on the chromebook

See Enable Developer Mode.

3) Install python3 virtual environment bundle

Transfer the fpstudy-virtualenv.tar.gz bundle to the test device.

One such method is to use scp, like in the following command:

(in/out) $ scp fpstudy-virtualenv.tar.gz root@$DUTIP:/root/

On the test device, extract the bundle into /opt/google, as shown in the following command set:

(device) $ mkdir -p /opt/google
(device) $ tar -xzvf /root/fpstudy-virtualenv.tar.gz -C /opt/google

Enable the fingerprint study Upstart job.

(device) $ ln -s /opt/google/fpstudy-virtualenv/study/fingerprint_study_virtualenv.conf /etc/init
(device) $ start fingerprint_study_virtualenv
(device) $ sleep 2
(device) $ status fingerprint_study_virtualenv

4) Configure

To configure the number of fingers, enrollment taps, and verification taps expected by the fingerprint study tool, please modify /opt/google/fpstudy-virtualenv/study/fingerprint_study_virtualenv.conf.

5) Test

Navigate to in a web browser.