blob: 5b3acec2d15a80003aa29c01a8deed6e3b942f3c [file] [log] [blame] [edit]
/*
* Copyright (C) 2018 Marvell International Ltd.
*
* SPDX-License-Identifier: BSD-3-Clause
* https://spdx.org/licenses
*/
#include <string.h>
#include <platform_def.h>
#include <arch_helpers.h>
#include <common/debug.h>
#include <drivers/console.h>
#include <marvell_plat_priv.h>
#include <marvell_pm.h>
#include <plat_marvell.h>
#define BR_FLAG_SILENT 0x1
#define SKIP_IMAGE_CODE 0xDEADB002
void mailbox_clean(void)
{
uintptr_t *mailbox = (void *)PLAT_MARVELL_MAILBOX_BASE;
memset(mailbox, 0, PLAT_MARVELL_MAILBOX_SIZE);
}
int exec_ble_main(int bootrom_flags)
{
int skip = 0;
uintptr_t *mailbox = (void *)PLAT_MARVELL_MAILBOX_BASE;
/*
* In some situations, like boot from UART, bootrom will
* request to avoid printing to console. in that case don't
* initialize the console and prints will be ignored
*/
if ((bootrom_flags & BR_FLAG_SILENT) == 0)
marvell_console_boot_init();
NOTICE("Starting binary extension\n");
/* initialize time (for delay functionality) */
plat_delay_timer_init();
ble_plat_setup(&skip);
/* if there's skip image request, bootrom will load from the image
* saved on the next address of the flash
*/
if (skip)
return SKIP_IMAGE_CODE;
/*
* Check if the mailbox magic number is stored at index MBOX_IDX_MAGIC
* and the suspend to RAM magic number at index MBOX_IDX_SUSPEND_MAGIC.
* If the above is true, this is the recovery from suspend to RAM state.
* In such case the mailbox should remain intact, since it stores the
* warm boot jump address to be used by the TF-A in BL31.
* Othervise the mailbox should be cleaned from a garbage data.
*/
if (mailbox[MBOX_IDX_MAGIC] != MVEBU_MAILBOX_MAGIC_NUM ||
mailbox[MBOX_IDX_SUSPEND_MAGIC] != MVEBU_MAILBOX_SUSPEND_STATE) {
NOTICE("Cold boot\n");
mailbox_clean();
} else {
void (*bootrom_exit)(void) =
(void (*)(void))mailbox[MBOX_IDX_ROM_EXIT_ADDR];
INFO("Recovery...\n");
/*
* If this is recovery from suspend, two things has to be done:
* 1. Define the DRAM region as executable memory for preparing
* jump to TF-A
* 2. Instead of returning control to the BootROM, invalidate
* and flush caches, and continue execution at address stored
* in the mailbox.
* This should be done until the BootROM have a native support
* for the system restore flow.
*/
marvell_ble_prepare_exit();
bootrom_exit();
}
return 0;
}
/* NOTE: don't notify this function, all code must be added to exec_ble_main
* in order to keep the end of ble_main as a fixed address.
*/
int __attribute__ ((section(".entry"))) ble_main(int bootrom_flags)
{
volatile int ret;
ret = exec_ble_main(bootrom_flags);
return ret;
}