# Makefile.in generated by automake 1.11.1 from Makefile.am.
# @configure_input@

# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
# Inc.
# This Makefile.in is free software; the Free Software Foundation
# gives unlimited permission to copy and/or distribute it,
# with or without modifications, as long as this notice is preserved.

# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
# PARTICULAR PURPOSE.

@SET_MAKE@

#
#   Copyright (C) 2012-2014 Free Software Foundation, Inc.
#
# This file is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 3 of the License, or
# (at your option) any later version.
# 
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
# 
# You should have received a copy of the GNU General Public License
# along with this program; see the file COPYING3.  If not see
# <http://www.gnu.org/licenses/>.
#


VPATH = @srcdir@
pkgdatadir = $(datadir)/@PACKAGE@
pkgincludedir = $(includedir)/@PACKAGE@
pkglibdir = $(libdir)/@PACKAGE@
pkglibexecdir = $(libexecdir)/@PACKAGE@
am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
install_sh_DATA = $(install_sh) -c -m 644
install_sh_PROGRAM = $(install_sh) -c
install_sh_SCRIPT = $(install_sh) -c
INSTALL_HEADER = $(INSTALL_DATA)
transform = $(program_transform_name)
NORMAL_INSTALL = :
PRE_INSTALL = :
POST_INSTALL = :
NORMAL_UNINSTALL = :
PRE_UNINSTALL = :
POST_UNINSTALL = :
build_triplet = @build@
host_triplet = @host@
target_triplet = @target@
bin_PROGRAMS = gprof$(EXEEXT)
subdir = .
DIST_COMMON = README ChangeLog $(srcdir)/Makefile.in \
	$(srcdir)/Makefile.am $(top_srcdir)/configure \
	$(am__configure_deps) $(srcdir)/gconfig.in \
	$(srcdir)/../mkinstalldirs $(top_srcdir)/po/Make-in \
	$(srcdir)/../depcomp $(gprof_TEXINFOS) $(noinst_HEADERS)
ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
am__aclocal_m4_deps = $(top_srcdir)/../bfd/warning.m4 \
	$(top_srcdir)/../config/depstand.m4 \
	$(top_srcdir)/../config/gettext-sister.m4 \
	$(top_srcdir)/../config/largefile.m4 \
	$(top_srcdir)/../config/lead-dot.m4 \
	$(top_srcdir)/../config/nls.m4 \
	$(top_srcdir)/../config/override.m4 \
	$(top_srcdir)/../config/plugins.m4 \
	$(top_srcdir)/../config/po.m4 \
	$(top_srcdir)/../config/progtest.m4 \
	$(top_srcdir)/../libtool.m4 $(top_srcdir)/../ltoptions.m4 \
	$(top_srcdir)/../ltsugar.m4 $(top_srcdir)/../ltversion.m4 \
	$(top_srcdir)/../lt~obsolete.m4 \
	$(top_srcdir)/../bfd/version.m4 $(top_srcdir)/configure.ac
am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
	$(ACLOCAL_M4)
am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
 configure.lineno config.status.lineno
mkinstalldirs = $(SHELL) $(top_srcdir)/../mkinstalldirs
CONFIG_HEADER = gconfig.h
CONFIG_CLEAN_FILES = po/Makefile.in
CONFIG_CLEAN_VPATH_FILES =
am__installdirs = "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" \
	"$(DESTDIR)$(man1dir)"
PROGRAMS = $(bin_PROGRAMS)
am__objects_1 = basic_blocks.$(OBJEXT) call_graph.$(OBJEXT) \
	cg_arcs.$(OBJEXT) cg_dfn.$(OBJEXT) cg_print.$(OBJEXT) \
	corefile.$(OBJEXT) gmon_io.$(OBJEXT) gprof.$(OBJEXT) \
	hertz.$(OBJEXT) hist.$(OBJEXT) source.$(OBJEXT) \
	search_list.$(OBJEXT) symtab.$(OBJEXT) sym_ids.$(OBJEXT) \
	utils.$(OBJEXT) i386.$(OBJEXT) alpha.$(OBJEXT) vax.$(OBJEXT) \
	tahoe.$(OBJEXT) sparc.$(OBJEXT) mips.$(OBJEXT) \
	aarch64.$(OBJEXT)
am_gprof_OBJECTS = $(am__objects_1) flat_bl.$(OBJEXT) \
	bsd_callg_bl.$(OBJEXT) fsf_callg_bl.$(OBJEXT)
gprof_OBJECTS = $(am_gprof_OBJECTS)
am__DEPENDENCIES_1 =
DEFAULT_INCLUDES = -I.@am__isrc@
depcomp = $(SHELL) $(top_srcdir)/../depcomp
am__depfiles_maybe = depfiles
am__mv = mv -f
COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
CCLD = $(CC)
LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \
	--mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \
	$(LDFLAGS) -o $@
SOURCES = $(gprof_SOURCES)
INFO_DEPS = gprof.info
am__TEXINFO_TEX_DIR = $(srcdir)/../texinfo
DVIS = gprof.dvi
PDFS = gprof.pdf
PSS = gprof.ps
HTMLS = gprof.html
TEXINFOS = gprof.texi
TEXI2PDF = $(TEXI2DVI) --pdf --batch
MAKEINFOHTML = $(MAKEINFO) --html
AM_MAKEINFOHTMLFLAGS = $(AM_MAKEINFOFLAGS)
DVIPS = dvips
RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
	html-recursive info-recursive install-data-recursive \
	install-dvi-recursive install-exec-recursive \
	install-html-recursive install-info-recursive \
	install-pdf-recursive install-ps-recursive install-recursive \
	installcheck-recursive installdirs-recursive pdf-recursive \
	ps-recursive uninstall-recursive
am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
am__vpath_adj = case $$p in \
    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
    *) f=$$p;; \
  esac;
am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
am__install_max = 40
am__nobase_strip_setup = \
  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
am__nobase_strip = \
  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
am__nobase_list = $(am__nobase_strip_setup); \
  for p in $$list; do echo "$$p $$p"; done | \
  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
    if (++n[$$2] == $(am__install_max)) \
      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
    END { for (dir in files) print dir, files[dir] }'
am__base_list = \
  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
man1dir = $(mandir)/man1
NROFF = nroff
MANS = $(man_MANS)
HEADERS = $(noinst_HEADERS)
RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
  distclean-recursive maintainer-clean-recursive
AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS
ETAGS = etags
CTAGS = ctags
DIST_SUBDIRS = $(SUBDIRS)
ACLOCAL = @ACLOCAL@
AMTAR = @AMTAR@
AR = @AR@
AUTOCONF = @AUTOCONF@
AUTOHEADER = @AUTOHEADER@
AUTOMAKE = @AUTOMAKE@
AWK = @AWK@
CATALOGS = @CATALOGS@
CATOBJEXT = @CATOBJEXT@
CC = @CC@
CCDEPMODE = @CCDEPMODE@
CFLAGS = @CFLAGS@
CPP = @CPP@
CPPFLAGS = @CPPFLAGS@
CYGPATH_W = @CYGPATH_W@
DATADIRNAME = @DATADIRNAME@
DEFS = @DEFS@
DEPDIR = @DEPDIR@
DSYMUTIL = @DSYMUTIL@
DUMPBIN = @DUMPBIN@
ECHO_C = @ECHO_C@
ECHO_N = @ECHO_N@
ECHO_T = @ECHO_T@
EGREP = @EGREP@
EXEEXT = @EXEEXT@
FGREP = @FGREP@
GENCAT = @GENCAT@
GMSGFMT = @GMSGFMT@
GREP = @GREP@
INCINTL = @INCINTL@
INSTALL = @INSTALL@
INSTALL_DATA = @INSTALL_DATA@
INSTALL_PROGRAM = @INSTALL_PROGRAM@
INSTALL_SCRIPT = @INSTALL_SCRIPT@
INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
INSTOBJEXT = @INSTOBJEXT@
LD = @LD@
LDFLAGS = @LDFLAGS@
LIBINTL = @LIBINTL@
LIBINTL_DEP = @LIBINTL_DEP@
LIBOBJS = @LIBOBJS@
LIBS = @LIBS@
LIBTOOL = @LIBTOOL@
LIPO = @LIPO@
LN_S = @LN_S@
LTLIBOBJS = @LTLIBOBJS@
MAINT = @MAINT@
MAKEINFO = @MAKEINFO@
MKDIR_P = @MKDIR_P@
MKINSTALLDIRS = @MKINSTALLDIRS@
MSGFMT = @MSGFMT@
MSGMERGE = @MSGMERGE@
NM = @NM@
NMEDIT = @NMEDIT@
NO_WERROR = @NO_WERROR@
OBJDUMP = @OBJDUMP@
OBJEXT = @OBJEXT@
OTOOL = @OTOOL@
OTOOL64 = @OTOOL64@
PACKAGE = @PACKAGE@
PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
PACKAGE_NAME = @PACKAGE_NAME@
PACKAGE_STRING = @PACKAGE_STRING@
PACKAGE_TARNAME = @PACKAGE_TARNAME@
PACKAGE_URL = @PACKAGE_URL@
PACKAGE_VERSION = @PACKAGE_VERSION@
PATH_SEPARATOR = @PATH_SEPARATOR@
POSUB = @POSUB@
RANLIB = @RANLIB@
SED = @SED@
SET_MAKE = @SET_MAKE@
SHELL = @SHELL@
STRIP = @STRIP@
USE_NLS = @USE_NLS@
VERSION = @VERSION@
WARN_CFLAGS = @WARN_CFLAGS@
XGETTEXT = @XGETTEXT@
abs_builddir = @abs_builddir@
abs_srcdir = @abs_srcdir@
abs_top_builddir = @abs_top_builddir@
abs_top_srcdir = @abs_top_srcdir@
ac_ct_CC = @ac_ct_CC@
ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
am__include = @am__include@
am__leading_dot = @am__leading_dot@
am__quote = @am__quote@
am__tar = @am__tar@
am__untar = @am__untar@
bindir = @bindir@
build = @build@
build_alias = @build_alias@
build_cpu = @build_cpu@
build_os = @build_os@
build_vendor = @build_vendor@
builddir = @builddir@
datadir = @datadir@
datarootdir = @datarootdir@
docdir = @docdir@
dvidir = @dvidir@
exec_prefix = @exec_prefix@
host = @host@
host_alias = @host_alias@
host_cpu = @host_cpu@
host_os = @host_os@
host_vendor = @host_vendor@
htmldir = @htmldir@
includedir = @includedir@
infodir = @infodir@
install_sh = @install_sh@
libdir = @libdir@
libexecdir = @libexecdir@
localedir = @localedir@
localstatedir = @localstatedir@
mandir = @mandir@
mkdir_p = @mkdir_p@
oldincludedir = @oldincludedir@
pdfdir = @pdfdir@
prefix = @prefix@
program_transform_name = @program_transform_name@
psdir = @psdir@
sbindir = @sbindir@
sharedstatedir = @sharedstatedir@
srcdir = @srcdir@
sysconfdir = @sysconfdir@
target = @target@
target_alias = @target_alias@
target_cpu = @target_cpu@
target_os = @target_os@
target_vendor = @target_vendor@
top_build_prefix = @top_build_prefix@
top_builddir = @top_builddir@
top_srcdir = @top_srcdir@
AUTOMAKE_OPTIONS = 1.11 foreign no-dist no-texinfo.tex
ACLOCAL_AMFLAGS = -I .. -I ../config -I ../bfd
TEXINFO_TEX = ../texinfo/texinfo.tex
SUFFIXES = .m
SUBDIRS = po
BASEDIR = $(srcdir)/..
BFDDIR = $(BASEDIR)/bfd
INCDIR = $(BASEDIR)/include
AM_CFLAGS = $(WARN_CFLAGS)
AM_CPPFLAGS = -DDEBUG -I../bfd -I$(srcdir)/../include \
	-I$(srcdir)/../bfd @INCINTL@ -I. \
	-DLOCALEDIR="\"$(datadir)/locale\""

sources = basic_blocks.c call_graph.c cg_arcs.c cg_dfn.c \
	cg_print.c corefile.c gmon_io.c gprof.c hertz.c hist.c source.c \
	search_list.c symtab.c sym_ids.c utils.c \
	i386.c alpha.c vax.c tahoe.c sparc.c mips.c aarch64.c

gprof_SOURCES = $(sources) flat_bl.c bsd_callg_bl.c fsf_callg_bl.c
gprof_DEPENDENCIES = ../bfd/libbfd.la ../libiberty/libiberty.a $(LIBINTL_DEP)
gprof_LDADD = ../bfd/libbfd.la ../libiberty/libiberty.a $(LIBINTL)
noinst_HEADERS = \
	basic_blocks.h call_graph.h cg_arcs.h cg_dfn.h cg_print.h \
	corefile.h gmon.h gmon_io.h gmon_out.h gprof.h hertz.h hist.h \
	search_list.h source.h sym_ids.h symtab.h utils.h

BUILT_SOURCES = flat_bl.c bsd_callg_bl.c fsf_callg_bl.c
EXTRA_DIST = $(BUILT_SOURCES) bbconv.pl $(man_MANS)

# development.sh is used to determine -Werror default.
CONFIG_STATUS_DEPENDENCIES = $(BFDDIR)/development.sh
POTFILES = $(sources) $(noinst_HEADERS)
MANCONF = -Dman
TEXI2POD = perl $(srcdir)/../etc/texi2pod.pl $(AM_MAKEINFOFLAGS)
POD2MAN = pod2man --center="GNU" --release="binutils-$(VERSION)" --section=1 --date=" "
info_TEXINFOS = gprof.texi
gprof_TEXINFOS = config.texi
man_MANS = gprof.1
AM_MAKEINFOFLAGS = -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
TEXI2DVI = texi2dvi -I "$(srcdir)" -I "$(top_srcdir)/../bfd/doc" -I ../bfd/doc
MAINTAINERCLEANFILES = gprof.info

# Automake 1.9 will only build info files in the objdir if they are
# mentioned in DISTCLEANFILES.  It doesn't have to be unconditional,
# though, so we use a bogus condition.
@GENINSRC_NEVER_TRUE@DISTCLEANFILES = gprof.info
all: $(BUILT_SOURCES) gconfig.h
	$(MAKE) $(AM_MAKEFLAGS) all-recursive

.SUFFIXES:
.SUFFIXES: .m .c .dvi .lo .o .obj .ps
am--refresh:
	@:
$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
	@for dep in $?; do \
	  case '$(am__configure_deps)' in \
	    *$$dep*) \
	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
		&& exit 0; \
	      exit 1;; \
	  esac; \
	done; \
	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
	$(am__cd) $(top_srcdir) && \
	  $(AUTOMAKE) --foreign Makefile
.PRECIOUS: Makefile
Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
	@case '$?' in \
	  *config.status*) \
	    echo ' $(SHELL) ./config.status'; \
	    $(SHELL) ./config.status;; \
	  *) \
	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
	esac;

$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
	$(SHELL) ./config.status --recheck

$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
	$(am__cd) $(srcdir) && $(AUTOCONF)
$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
$(am__aclocal_m4_deps):

gconfig.h: stamp-h1
	@if test ! -f $@; then \
	  rm -f stamp-h1; \
	  $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \
	else :; fi

stamp-h1: $(srcdir)/gconfig.in $(top_builddir)/config.status
	@rm -f stamp-h1
	cd $(top_builddir) && $(SHELL) ./config.status gconfig.h
$(srcdir)/gconfig.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
	rm -f stamp-h1
	touch $@

distclean-hdr:
	-rm -f gconfig.h stamp-h1
po/Makefile.in: $(top_builddir)/config.status $(top_srcdir)/po/Make-in
	cd $(top_builddir) && $(SHELL) ./config.status $@
install-binPROGRAMS: $(bin_PROGRAMS)
	@$(NORMAL_INSTALL)
	test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)"
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	for p in $$list; do echo "$$p $$p"; done | \
	sed 's/$(EXEEXT)$$//' | \
	while read p p1; do if test -f $$p || test -f $$p1; \
	  then echo "$$p"; echo "$$p"; else :; fi; \
	done | \
	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
	sed 'N;N;N;s,\n, ,g' | \
	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
	    else { print "f", $$3 "/" $$4, $$1; } } \
	  END { for (d in files) print "f", d, files[d] }' | \
	while read type dir files; do \
	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
	    test -z "$$files" || { \
	    echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
	    $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
	    } \
	; done

uninstall-binPROGRAMS:
	@$(NORMAL_UNINSTALL)
	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
	files=`for p in $$list; do echo "$$p"; done | \
	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
	      -e 's/$$/$(EXEEXT)/' `; \
	test -n "$$list" || exit 0; \
	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
	cd "$(DESTDIR)$(bindir)" && rm -f $$files

clean-binPROGRAMS:
	@list='$(bin_PROGRAMS)'; test -n "$$list" || exit 0; \
	echo " rm -f" $$list; \
	rm -f $$list || exit $$?; \
	test -n "$(EXEEXT)" || exit 0; \
	list=`for p in $$list; do echo "$$p"; done | sed 's/$(EXEEXT)$$//'`; \
	echo " rm -f" $$list; \
	rm -f $$list
gprof$(EXEEXT): $(gprof_OBJECTS) $(gprof_DEPENDENCIES) 
	@rm -f gprof$(EXEEXT)
	$(LINK) $(gprof_OBJECTS) $(gprof_LDADD) $(LIBS)

mostlyclean-compile:
	-rm -f *.$(OBJEXT)

distclean-compile:
	-rm -f *.tab.c

@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/aarch64.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/alpha.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/basic_blocks.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/bsd_callg_bl.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/call_graph.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cg_arcs.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cg_dfn.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/cg_print.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/corefile.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/flat_bl.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/fsf_callg_bl.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gmon_io.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/gprof.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hertz.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/hist.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/i386.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/mips.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/search_list.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/source.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sparc.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sym_ids.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/symtab.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/tahoe.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/utils.Po@am__quote@
@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/vax.Po@am__quote@

.c.o:
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c $<

.c.obj:
@am__fastdepCC_TRUE@	$(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(COMPILE) -c `$(CYGPATH_W) '$<'`

.c.lo:
@am__fastdepCC_TRUE@	$(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
@am__fastdepCC_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo
@AMDEP_TRUE@@am__fastdepCC_FALSE@	source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@
@AMDEP_TRUE@@am__fastdepCC_FALSE@	DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@
@am__fastdepCC_FALSE@	$(LTCOMPILE) -c -o $@ $<

mostlyclean-libtool:
	-rm -f *.lo

clean-libtool:
	-rm -rf .libs _libs

distclean-libtool:
	-rm -f libtool config.lt

gprof.info: gprof.texi $(gprof_TEXINFOS)
	restore=: && backupdir="$(am__leading_dot)am$$$$" && \
	rm -rf $$backupdir && mkdir $$backupdir && \
	if ($(MAKEINFO) --version) >/dev/null 2>&1; then \
	  for f in $@ $@-[0-9] $@-[0-9][0-9] $(@:.info=).i[0-9] $(@:.info=).i[0-9][0-9]; do \
	    if test -f $$f; then mv $$f $$backupdir; restore=mv; else :; fi; \
	  done; \
	else :; fi && \
	if $(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi; \
	then \
	  rc=0; \
	else \
	  rc=$$?; \
	  $$restore $$backupdir/* `echo "./$@" | sed 's|[^/]*$$||'`; \
	fi; \
	rm -rf $$backupdir; exit $$rc

gprof.dvi: gprof.texi $(gprof_TEXINFOS) 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2DVI) -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi

gprof.pdf: gprof.texi $(gprof_TEXINFOS) 
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	MAKEINFO='$(MAKEINFO) $(AM_MAKEINFOFLAGS) $(MAKEINFOFLAGS) -I $(srcdir)' \
	$(TEXI2PDF) -o $@ `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi

gprof.html: gprof.texi $(gprof_TEXINFOS) 
	rm -rf $(@:.html=.htp)
	if $(MAKEINFOHTML) $(AM_MAKEINFOHTMLFLAGS) $(MAKEINFOFLAGS) -I $(srcdir) \
	 -o $(@:.html=.htp) `test -f 'gprof.texi' || echo '$(srcdir)/'`gprof.texi; \
	then \
	  rm -rf $@; \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    mv $(@:.html=) $@; else mv $(@:.html=.htp) $@; fi; \
	else \
	  if test ! -d $(@:.html=.htp) && test -d $(@:.html=); then \
	    rm -rf $(@:.html=); else rm -Rf $(@:.html=.htp) $@; fi; \
	  exit 1; \
	fi
.dvi.ps:
	TEXINPUTS="$(am__TEXINFO_TEX_DIR)$(PATH_SEPARATOR)$$TEXINPUTS" \
	$(DVIPS) -o $@ $<

uninstall-dvi-am:
	@$(NORMAL_UNINSTALL)
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(dvidir)/$$f'"; \
	  rm -f "$(DESTDIR)$(dvidir)/$$f"; \
	done

uninstall-html-am:
	@$(NORMAL_UNINSTALL)
	@list='$(HTMLS)'; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -rf '$(DESTDIR)$(htmldir)/$$f'"; \
	  rm -rf "$(DESTDIR)$(htmldir)/$$f"; \
	done

uninstall-info-am:
	@$(PRE_UNINSTALL)
	@if test -d '$(DESTDIR)$(infodir)' && \
	    (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' --remove '$(DESTDIR)$(infodir)/$$relfile'"; \
	    if install-info --info-dir="$(DESTDIR)$(infodir)" --remove "$(DESTDIR)$(infodir)/$$relfile"; \
	    then :; else test ! -f "$(DESTDIR)$(infodir)/$$relfile" || exit 1; fi; \
	  done; \
	else :; fi
	@$(NORMAL_UNINSTALL)
	@list='$(INFO_DEPS)'; \
	for file in $$list; do \
	  relfile=`echo "$$file" | sed 's|^.*/||'`; \
	  relfile_i=`echo "$$relfile" | sed 's|\.info$$||;s|$$|.i|'`; \
	  (if test -d "$(DESTDIR)$(infodir)" && cd "$(DESTDIR)$(infodir)"; then \
	     echo " cd '$(DESTDIR)$(infodir)' && rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]"; \
	     rm -f $$relfile $$relfile-[0-9] $$relfile-[0-9][0-9] $$relfile_i[0-9] $$relfile_i[0-9][0-9]; \
	   else :; fi); \
	done

uninstall-pdf-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(pdfdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(pdfdir)/$$f"; \
	done

uninstall-ps-am:
	@$(NORMAL_UNINSTALL)
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  $(am__strip_dir) \
	  echo " rm -f '$(DESTDIR)$(psdir)/$$f'"; \
	  rm -f "$(DESTDIR)$(psdir)/$$f"; \
	done

dist-info: $(INFO_DEPS)
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; \
	for base in $$list; do \
	  case $$base in \
	    $(srcdir)/*) base=`echo "$$base" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$base; then d=.; else d=$(srcdir); fi; \
	  base_i=`echo "$$base" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for file in $$d/$$base $$d/$$base-[0-9] $$d/$$base-[0-9][0-9] $$d/$$base_i[0-9] $$d/$$base_i[0-9][0-9]; do \
	    if test -f $$file; then \
	      relfile=`expr "$$file" : "$$d/\(.*\)"`; \
	      test -f "$(distdir)/$$relfile" || \
		cp -p $$file "$(distdir)/$$relfile"; \
	    else :; fi; \
	  done; \
	done

mostlyclean-aminfo:
	-rm -rf gprof.aux gprof.cp gprof.cps gprof.fn gprof.fns gprof.ky gprof.kys \
	  gprof.log gprof.pg gprof.pgs gprof.tmp gprof.toc gprof.tp \
	  gprof.tps gprof.vr gprof.vrs

clean-aminfo:
	-test -z "gprof.dvi gprof.pdf gprof.ps gprof.html" \
	|| rm -rf gprof.dvi gprof.pdf gprof.ps gprof.html

maintainer-clean-aminfo:
	@list='$(INFO_DEPS)'; for i in $$list; do \
	  i_i=`echo "$$i" | sed 's|\.info$$||;s|$$|.i|'`; \
	  echo " rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]"; \
	  rm -f $$i $$i-[0-9] $$i-[0-9][0-9] $$i_i[0-9] $$i_i[0-9][0-9]; \
	done
install-man1: $(man_MANS)
	@$(NORMAL_INSTALL)
	test -z "$(man1dir)" || $(MKDIR_P) "$(DESTDIR)$(man1dir)"
	@list=''; test -n "$(man1dir)" || exit 0; \
	{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | while read p; do \
	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; echo "$$p"; \
	done | \
	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
	sed 'N;N;s,\n, ,g' | { \
	list=; while read file base inst; do \
	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man1dir)/$$inst'"; \
	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man1dir)/$$inst" || exit $$?; \
	  fi; \
	done; \
	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
	while read files; do \
	  test -z "$$files" || { \
	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man1dir)'"; \
	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man1dir)" || exit $$?; }; \
	done; }

uninstall-man1:
	@$(NORMAL_UNINSTALL)
	@list=''; test -n "$(man1dir)" || exit 0; \
	files=`{ for i in $$list; do echo "$$i"; done; \
	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
	  sed -n '/\.1[a-z]*$$/p'; \
	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^1][0-9a-z]*$$,1,;x' \
	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
	test -z "$$files" || { \
	  echo " ( cd '$(DESTDIR)$(man1dir)' && rm -f" $$files ")"; \
	  cd "$(DESTDIR)$(man1dir)" && rm -f $$files; }

# This directory's subdirectories are mostly independent; you can cd
# into them and run `make' without going through this Makefile.
# To change the values of `make' variables: instead of editing Makefiles,
# (1) if the variable is set in `config.status', edit `config.status'
#     (which will cause the Makefiles to be regenerated when you run `make');
# (2) otherwise, pass the desired values on the `make' command line.
$(RECURSIVE_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	target=`echo $@ | sed s/-recursive//`; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    dot_seen=yes; \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done; \
	if test "$$dot_seen" = "no"; then \
	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
	fi; test -z "$$fail"

$(RECURSIVE_CLEAN_TARGETS):
	@fail= failcom='exit 1'; \
	for f in x $$MAKEFLAGS; do \
	  case $$f in \
	    *=* | --[!k]*);; \
	    *k*) failcom='fail=yes';; \
	  esac; \
	done; \
	dot_seen=no; \
	case "$@" in \
	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
	  *) list='$(SUBDIRS)' ;; \
	esac; \
	rev=''; for subdir in $$list; do \
	  if test "$$subdir" = "."; then :; else \
	    rev="$$subdir $$rev"; \
	  fi; \
	done; \
	rev="$$rev ."; \
	target=`echo $@ | sed s/-recursive//`; \
	for subdir in $$rev; do \
	  echo "Making $$target in $$subdir"; \
	  if test "$$subdir" = "."; then \
	    local_target="$$target-am"; \
	  else \
	    local_target="$$target"; \
	  fi; \
	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
	  || eval $$failcom; \
	done && test -z "$$fail"
tags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
	done
ctags-recursive:
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
	done

ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	mkid -fID $$unique
tags: TAGS

TAGS: tags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	set x; \
	here=`pwd`; \
	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
	  include_option=--etags-include; \
	  empty_fix=.; \
	else \
	  include_option=--include; \
	  empty_fix=; \
	fi; \
	list='$(SUBDIRS)'; for subdir in $$list; do \
	  if test "$$subdir" = .; then :; else \
	    test ! -f $$subdir/TAGS || \
	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
	  fi; \
	done; \
	list='$(SOURCES) $(HEADERS) gconfig.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	shift; \
	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
	  test -n "$$unique" || unique=$$empty_fix; \
	  if test $$# -gt 0; then \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      "$$@" $$unique; \
	  else \
	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
	      $$unique; \
	  fi; \
	fi
ctags: CTAGS
CTAGS: ctags-recursive $(HEADERS) $(SOURCES) gconfig.in $(TAGS_DEPENDENCIES) \
		$(TAGS_FILES) $(LISP)
	list='$(SOURCES) $(HEADERS) gconfig.in $(LISP) $(TAGS_FILES)'; \
	unique=`for i in $$list; do \
	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
	  done | \
	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
	      END { if (nonempty) { for (i in files) print i; }; }'`; \
	test -z "$(CTAGS_ARGS)$$unique" \
	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
	     $$unique

GTAGS:
	here=`$(am__cd) $(top_builddir) && pwd` \
	  && $(am__cd) $(top_srcdir) \
	  && gtags -i $(GTAGS_ARGS) "$$here"

distclean-tags:
	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
check-am: all-am
check: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) check-recursive
all-am: Makefile $(INFO_DEPS) $(PROGRAMS) $(MANS) $(HEADERS) gconfig.h
installdirs: installdirs-recursive
installdirs-am:
	for dir in "$(DESTDIR)$(bindir)" "$(DESTDIR)$(infodir)" "$(DESTDIR)$(man1dir)"; do \
	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
	done
install: $(BUILT_SOURCES)
	$(MAKE) $(AM_MAKEFLAGS) install-recursive
install-exec: install-exec-recursive
install-data: install-data-recursive
uninstall: uninstall-recursive

install-am: all-am
	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am

installcheck: installcheck-recursive
install-strip:
	$(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
	  install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
	  `test -z '$(STRIP)' || \
	    echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
mostlyclean-generic:

clean-generic:

distclean-generic:
	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)

maintainer-clean-generic:
	@echo "This command is intended for maintainers to use"
	@echo "it deletes files that may require special tools to rebuild."
	-test -z "$(BUILT_SOURCES)" || rm -f $(BUILT_SOURCES)
	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
clean: clean-recursive

clean-am: clean-aminfo clean-binPROGRAMS clean-generic clean-libtool \
	mostlyclean-am

distclean: distclean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
distclean-am: clean-am distclean-compile distclean-generic \
	distclean-hdr distclean-libtool distclean-tags

dvi: dvi-recursive

dvi-am: $(DVIS)

html: html-recursive

html-am: $(HTMLS)

info: info-recursive

info-am: $(INFO_DEPS)

install-data-am: install-info-am install-man

install-dvi: install-dvi-recursive

install-dvi-am: $(DVIS)
	@$(NORMAL_INSTALL)
	test -z "$(dvidir)" || $(MKDIR_P) "$(DESTDIR)$(dvidir)"
	@list='$(DVIS)'; test -n "$(dvidir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(dvidir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(dvidir)" || exit $$?; \
	done
install-exec-am: install-binPROGRAMS

install-html: install-html-recursive

install-html-am: $(HTMLS)
	@$(NORMAL_INSTALL)
	test -z "$(htmldir)" || $(MKDIR_P) "$(DESTDIR)$(htmldir)"
	@list='$(HTMLS)'; list2=; test -n "$(htmldir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p" || test -d "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  $(am__strip_dir) \
	  if test -d "$$d$$p"; then \
	    echo " $(MKDIR_P) '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(MKDIR_P) "$(DESTDIR)$(htmldir)/$$f" || exit 1; \
	    echo " $(INSTALL_DATA) '$$d$$p'/* '$(DESTDIR)$(htmldir)/$$f'"; \
	    $(INSTALL_DATA) "$$d$$p"/* "$(DESTDIR)$(htmldir)/$$f" || exit $$?; \
	  else \
	    list2="$$list2 $$d$$p"; \
	  fi; \
	done; \
	test -z "$$list2" || { echo "$$list2" | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(htmldir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(htmldir)" || exit $$?; \
	done; }
install-info: install-info-recursive

install-info-am: $(INFO_DEPS)
	@$(NORMAL_INSTALL)
	test -z "$(infodir)" || $(MKDIR_P) "$(DESTDIR)$(infodir)"
	@srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
	list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	for file in $$list; do \
	  case $$file in \
	    $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
	  esac; \
	  if test -f $$file; then d=.; else d=$(srcdir); fi; \
	  file_i=`echo "$$file" | sed 's|\.info$$||;s|$$|.i|'`; \
	  for ifile in $$d/$$file $$d/$$file-[0-9] $$d/$$file-[0-9][0-9] \
	               $$d/$$file_i[0-9] $$d/$$file_i[0-9][0-9] ; do \
	    if test -f $$ifile; then \
	      echo "$$ifile"; \
	    else : ; fi; \
	  done; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(infodir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(infodir)" || exit $$?; done
	@$(POST_INSTALL)
	@if (install-info --version && \
	     install-info --version 2>&1 | sed 1q | grep -i -v debian) >/dev/null 2>&1; then \
	  list='$(INFO_DEPS)'; test -n "$(infodir)" || list=; \
	  for file in $$list; do \
	    relfile=`echo "$$file" | sed 's|^.*/||'`; \
	    echo " install-info --info-dir='$(DESTDIR)$(infodir)' '$(DESTDIR)$(infodir)/$$relfile'";\
	    install-info --info-dir="$(DESTDIR)$(infodir)" "$(DESTDIR)$(infodir)/$$relfile" || :;\
	  done; \
	else : ; fi
install-man: install-man1

install-pdf: install-pdf-recursive

install-pdf-am: $(PDFS)
	@$(NORMAL_INSTALL)
	test -z "$(pdfdir)" || $(MKDIR_P) "$(DESTDIR)$(pdfdir)"
	@list='$(PDFS)'; test -n "$(pdfdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pdfdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(pdfdir)" || exit $$?; done
install-ps: install-ps-recursive

install-ps-am: $(PSS)
	@$(NORMAL_INSTALL)
	test -z "$(psdir)" || $(MKDIR_P) "$(DESTDIR)$(psdir)"
	@list='$(PSS)'; test -n "$(psdir)" || list=; \
	for p in $$list; do \
	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
	  echo "$$d$$p"; \
	done | $(am__base_list) | \
	while read files; do \
	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(psdir)'"; \
	  $(INSTALL_DATA) $$files "$(DESTDIR)$(psdir)" || exit $$?; done
installcheck-am:

maintainer-clean: maintainer-clean-recursive
	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
	-rm -rf $(top_srcdir)/autom4te.cache
	-rm -rf ./$(DEPDIR)
	-rm -f Makefile
maintainer-clean-am: distclean-am maintainer-clean-aminfo \
	maintainer-clean-generic

mostlyclean: mostlyclean-recursive

mostlyclean-am: mostlyclean-aminfo mostlyclean-compile \
	mostlyclean-generic mostlyclean-libtool

pdf: pdf-recursive

pdf-am: $(PDFS)

ps: ps-recursive

ps-am: $(PSS)

uninstall-am: uninstall-binPROGRAMS uninstall-dvi-am uninstall-html-am \
	uninstall-info-am uninstall-man uninstall-pdf-am \
	uninstall-ps-am

uninstall-man: uninstall-man1

.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all check \
	ctags-recursive install install-am install-strip \
	tags-recursive

.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
	all all-am am--refresh check check-am clean clean-aminfo \
	clean-binPROGRAMS clean-generic clean-libtool ctags \
	ctags-recursive dist-info distclean distclean-compile \
	distclean-generic distclean-hdr distclean-libtool \
	distclean-tags dvi dvi-am html html-am info info-am install \
	install-am install-binPROGRAMS install-data install-data-am \
	install-dvi install-dvi-am install-exec install-exec-am \
	install-html install-html-am install-info install-info-am \
	install-man install-man1 install-pdf install-pdf-am install-ps \
	install-ps-am install-strip installcheck installcheck-am \
	installdirs installdirs-am maintainer-clean \
	maintainer-clean-aminfo maintainer-clean-generic mostlyclean \
	mostlyclean-aminfo mostlyclean-compile mostlyclean-generic \
	mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
	uninstall uninstall-am uninstall-binPROGRAMS uninstall-dvi-am \
	uninstall-html-am uninstall-info-am uninstall-man \
	uninstall-man1 uninstall-pdf-am uninstall-ps-am


diststuff: $(BUILT_SOURCES) info $(man_MANS)

# This empty rule is a hack against gmake patched by Apple.
%.o:%.m

.m.c:
	awk -f $(srcdir)/gen-c-prog.awk > $@ \
	    FUNCTION=`(echo $*|sed -e 's,.*/,,g' -e 's/_bl//')`_blurb \
	    FILE=$*.m $<
po/POTFILES.in: @MAINT@ Makefile
	for f in $(POTFILES); do echo $$f; done | LC_ALL=C sort > tmp \
	  && mv tmp $(srcdir)/po/POTFILES.in

config.texi:
	echo "@set top_srcdir $(top_srcdir)" >> ./config.texi

# Build the man page from the texinfo file
# The sed command removes the no-adjust Nroff command so that
# the man output looks standard.
gprof.1: $(srcdir)/gprof.texi config.texi
	touch $@
	-$(TEXI2POD) $(MANCONF) -Dgprof < $(srcdir)/gprof.texi > gprof.pod
	-($(POD2MAN) gprof.pod | \
	       sed -e '/^.if n .na/d' > $@.T$$$$ && \
	       mv -f $@.T$$$$ $@) || \
	       (rm -f $@.T$$$$ && exit 1)
	rm -f gprof.pod

# Tell versions [3.59,3.63) of GNU make to not export all variables.
# Otherwise a system limit (for SysV at least) may be exceeded.
.NOEXPORT: