| |
| Release Notes for |
| ----------------- |
| Stoney Platform Initialization (StoneyPI) |
| |
| ============================================================================= |
| Version: 1.3.0.9 partial update Release Date: Mar 2018 |
| File: 3rdparty/blobs/pi/amd/00670F00/FT4/AGESA.bin |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.03 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.9 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| PlatformBIOS - StoneyFt4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.9 |
| 1) A fix to AGESA_ALERT (only shows up after fixing AGESA_WARNING) |
| 2) A fix to resetting at AmdInitPost after a 0x0CF9 reset with 0x0E |
| 3) A call out by the AP to do CAR teardown externally |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| 4. Important Notes |
| - To pass Win10 RS3 HLK on the new system, please integrate PSP FW for TCG 1.37 |
| into BIOS; for existing shipped system, please continue using PSP FW for TCG |
| 1.22. |
| |
| ============================================================================= |
| Version: 1.3.0.9 Release Date: Nov 2017 |
| File: StoneyPI_1_3_0_9.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.03 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.9 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063.3 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v031 |
| - Bristol AM4 VBIOS v003 |
| - Stoney Generic VBIOS v007 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.17.0 |
| - Bristol AM4 1.27.19.0 |
| - Stoney 26.16.0 |
| - Stoney FT4 Fanless 33.6.0 |
| PSP - Carrizo/Bristol |
| 0.5.0.36 for TCG 1.22 |
| 0.5.0.37 for TCG 1.37 |
| - Stoney |
| 0.6.0.21 for TCG 1.22 |
| 0.6.0.22 for TCG 1.37 |
| PT FW - 170504_40_01_00 |
| PlatformBIOS - Gardenia Platform BIOS RGY1309A.FD |
| Jadeite Platform BIOS RJD1309A.FD |
| Myrtle Platform BIOS RMY1309A.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| CarrizoFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.8 |
| - PLAT-17087: Create a PCD to control PspMboxBiosClearSmmLock at RTB Event |
| - PLAT-16146: Limit all BIOS-2-PSP commands after BOOT_DONE in SMM mode only |
| using specified SMM command buffer |
| - PLAT-15874: Move IOMMU IOAGR Programming to Early Init Phase |
| - PLAT-25107: AGESA FCH modifies flash |
| - PLAT-26520: [ST] PSP Firmware Release 0.6.0.22 |
| - PLAT-25858: [ST] PSP Firmware Release 0.6.0.21 |
| - PLAT-26524: [BR] PSP Firmware Release 0.5.0.37 |
| - PLAT-25861: [BR] PSP Firmware Release 0.5.0.36 |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| 4. Important Notes |
| - To pass Win10 RS3 HLK on the new system, please integrate PSP FW for TCG 1.37 |
| into BIOS; for existing shipped system, please continue using PSP FW for TCG |
| 1.22. |
| |
| ============================================================================= |
| Version: 1.3.0.8 Release Date: Sep 2017 |
| File: StoneyPI_1_3_0_8.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.03 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.8 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063.2 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v031 |
| - Bristol AM4 VBIOS v003 |
| - Stoney Generic VBIOS v007 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.17.0 |
| - Bristol AM4 1.27.19.0 |
| - Stoney 26.16.0 |
| - Stoney FT4 Fanless 33.6.0 |
| PSP - Carrizo/Bristol 0.5.0.2F |
| - Stoney 0.6.0.1E |
| PT FW - 170504_40_01_00 |
| PlatformBIOS - Gardenia Platform BIOS RGY1308A.FD |
| Jadeite Platform BIOS RJD1308A.FD |
| Myrtle Platform BIOS RMY1308A.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| CarrizoFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.7 |
| - PLAT-23583: [ST] New brand string PRO A6 and PRO A4 |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.3.0.7 Release Date: Jul 2017 |
| File: StoneyPI_1_3_0_7.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.03 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.7 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063.2 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v031 |
| - Bristol AM4 VBIOS v003 |
| - Stoney Generic VBIOS v007 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.17.0 |
| - Bristol AM4 1.27.19.0 |
| - Stoney 26.16.0 |
| - Stoney FT4 Fanless 33.6.0 |
| PSP - Carrizo/Bristol 0.5.0.2F |
| - Stoney 0.6.0.1E |
| PT FW - 170504_40_01_00 |
| PlatformBIOS - Gardenia Platform BIOS RGY1307A.FD |
| Jadeite Platform BIOS RJD1307A.FD |
| Myrtle Platform BIOS RMY1307A.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| CarrizoFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.6 |
| - PLAT-22781: SMU Firmware Release for FT4 Fanless 33.6.0 |
| - PLAT-14159: Update USB recovery code |
| - PLAT-16434: FCH ASL code incorrect operation region size |
| - PLAT-17156: Update IoMux setting of I2C2 & I2C3 |
| - PLAT-20735: Report the number of active DIMMs in PartitionWidth |
| - PLAT-20868: Update AcpiGpe0Blk and Pm1Status register programming |
| - PLAT-20395: [PT] ODD device behinds PT GPP lost after S3 resume |
| - PLAT-22772: [PT] Update PT FW to 170504_40_01_00 |
| - PLAT-22033: Set MSRC001_0015[3] TlbCacheDis to 1 in all cores |
| - PLAT-21514: FCH temperature monitoring bug |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.3.0.6 Release Date: Dec 2016 |
| File: StoneyPI_1_3_0_6.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.03 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.6 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063.2 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v031 |
| - Bristol AM4 VBIOS v003 |
| - Stoney Generic VBIOS v007 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.17.0 |
| - Bristol AM4 1.27.19.0 |
| - Stoney 26.16.0 |
| - Stoney FT4 Fanless 33.5.0 |
| PSP - Carrizo/Bristol 0.5.0.2F |
| - Stoney 0.6.0.1E |
| PT FW - 160919_40_01_00 |
| PlatformBIOS - Gardenia Platform BIOS RGY1306B.FD |
| Jadeite Platform BIOS RJD1306B.FD |
| Myrtle Platform BIOS RMY1306B.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| CarrizoFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.5 |
| - PLAT-13570: [CZ/BR] PSP Firmware Release 0.5.0.2F |
| - PLAT-13518: [ST] PSP Firmware Release 0.6.0.1E |
| - PLAT-12728: [PT] Support Fine tune USB 3.0 TX for separate port |
| - PLAT-12173: [PT] After select "PT SATA Port" Disable to Enable ,the HDD |
| populated on PT cannot be shown in boot Manager by warm reset |
| - PLAT-12168: Clear IRQ1FilterEn and IRQ12FilterEn by default |
| - PLAT-12672: SMBIOS Type 20 Partition Row Position should avoid 0 |
| - PLAT-13337: Update interface to override VrefHspeed per Dct and M-state |
| - PLAT-13524: Update BuildPspImage.bat to use python interpreter directly |
| - PLAT-12060: PMx00[AsfMasterEn] should not be touched |
| - PLAT-13509: [BR] SMU Firmware Release 27.17.0 |
| - PLAT-12071: [ST] DDR2400 UDIMM fails S3 resume |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.3.0.5 Release Date: Sep 2016 |
| File: StoneyPI_1_3_0_5.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.5 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v031 |
| - Bristol AM4 VBIOS v003 |
| - Stoney Generic VBIOS v007 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.16.0 |
| - Bristol AM4 1.27.19.0 |
| - Stoney 26.16.0 |
| - Stoney FT4 Fanless 33.5.0 |
| PSP - Carrizo/Bristol 0.5.0.2D |
| - Stoney 0.6.0.1C |
| PT FW - 160919_40_01_00 |
| PlatformBIOS - Gardenia Platform BIOS RGY1305B.FD |
| Jadeite Platform BIOS RJD1305B.FD |
| Myrtle Platform BIOS RMY1305B.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| CarrizoFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.4 |
| - PLAT-11954: [PT] PT FW update to 160919_40_01_00 |
| - PLAT-11439: Customize boot display device by integrated system info table |
| - PLAT-11075: Add interface to override memory data bus configuration table |
| - PLAT-11608: Update BuildPspDirectory to use Max size if recovery enabled |
| - PLAT-11501: Alignment issue for DxFxx2A6_ADDRESS |
| - PLAT-11520: [BR/CZ] PSP Firmware Release 0.5.0.2D |
| - PLAT-10832: Fix InterleavePosition and InterleavedDataDepth in DMI Type20 |
| - PLAT-10839: Incorrect index used to find DdrMaxRate when NPST is disabled |
| - PLAT-11679: Fix BSOD 0x7B for CF9/0Eh reset |
| - PLAT-11684: [PT] Modify PT load FW sequence |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.3.0.4 Release Date: Sep 2016 |
| File: StoneyPI_1_3_0_4.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.4 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Bristol AM4 VBIOS v002 |
| - Stoney Generic VBIOS v006 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.16.0 |
| - Bristol AM4 1.27.19.0 |
| - Stoney 26.16.0 |
| - Stoney FT4 Fanless 33.5.0 |
| PSP - Carrizo/Bristol 0.5.0.2C |
| - Stoney 0.6.0.1C |
| PlatformBIOS - Gardenia Platform BIOS RGY1304B.FD |
| Jadeite Platform BIOS RJD1304B.FD |
| Myrtle Platform BIOS RMY1304B.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| CarrizoFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.3 |
| - PLAT-11297: [CZ/BR] Move CZ DDR4 Detection Scheme to beforeApLaunch table |
| - PLAT-11186: Clear LPCxB8[24] PrefetchEnSpiFromHost bit to 0 for SPI TPM |
| - PLAT-11158: BSOD 0x9F in S3 or S4 stress test |
| - PLAT-10820: Change BGADJ value to 7h for USB |
| - PLAT-10866: [ST] Add A4 Series string to DMI table |
| - PLAT-10910: [BR] Update D18F4x40 register setting |
| - PLAT-10942: [BR] PSP Firmware Release 0.5.0.2C |
| - PLAT-11083: [BR FP4] SMU Firmware Release 27.16.0 |
| - PLAT-11154: [ST] Fanless SMU Firmware Release 33.5.0 |
| - PLAT-11026: [CZ] Enable Data interleaving and change the ECC symbol size to x8 |
| - PLAT-10713: [CZ/BR] Implement CZ DDR4 Detection Scheme |
| - PLAT-10012: [CZ] Add Opteron X3 to DMI table |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.3.0.3 Release Date: Aug 2016 |
| File: StoneyPI_1_3_0_3.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.3 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Bristol AM4 VBIOS v002 |
| - Stoney Generic VBIOS v006 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.15.0 |
| - Bristol AM4 1.27.19.0 |
| - Stoney 26.16.0 |
| - Stoney FT4 Fanless 33.4.0 |
| PSP - Carrizo/Bristol 0.5.0.29 |
| - Stoney 0.6.0.1C |
| PlatformBIOS - Gardenia Platform BIOS RGY1303B.FD |
| Jadeite Platform BIOS RJD1303B.FD |
| Myrtle Platform BIOS RMY1303B.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| CarrizoFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.2 |
| - PLAT-10652: [BR AM4] Critical FW/BIOS fix for SMU FW setting |
| [BR AM4] SMU Firmware Release 1.27.19.0 |
| - PLAT-10677: [BR/CZ] PSP Firmware Release 0.5.0.29 |
| - PLAT-10470: [ST] PSP Firmware Release 0.6.0.1C |
| - PLAT-10358: [ST] SMU Firmware Release 26.16.0 |
| - PLAT-10630: [PT] Win7 boot fail from FCH SATA if PT SATA with device connected |
| is disabled |
| - PLAT-10446: Missing terminator for memory override arrays |
| - PLAT-10458: [PT] Publish PT FW init done Ppi in after FW loaded |
| - PLAT-9522: Limit the BIOS command ID to 7 bits |
| - PLAT-7714: AGESA SMI handler errors |
| - PLAT-9964: [BR] 2133 x/DR Disable RttWr and RttPark |
| - PLAT-10252: [PT] Update PT FW to 160722_40_01_00 |
| - PLAT-10081: [PT] Support Redriver feature |
| - PLAT-10005: [PT] Support Equalization4 feature |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.3.0.2 Release Date: Jul 2016 |
| File: StoneyPI_1_3_0_2.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.2 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Bristol AM4 VBIOS v002 |
| - Stoney Generic VBIOS v006 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.15.0 |
| - Bristol AM4 1.27.18.0 |
| - Stoney 26.15.0 |
| - Stoney FT4 Fanless 33.4.0 |
| PSP - Carrizo/Bristol 0.5.0.27 |
| - Stoney 0.6.0.1A |
| PlatformBIOS - Gardenia Platform BIOS RGY1302B.FD |
| Jadeite Platform BIOS RJD1302B.FD |
| Myrtle Platform BIOS RMY1302B.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| CarrizoFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.1 |
| - PLAT-9884: [PT] Update PT FW to 160707_40_01_02 |
| - PLAT-9656: Add AmdPeiInitEarlyPpiGuid in Promontory PEI dependency |
| - PLAT-9529: [BR AM4] Optimal DRDR CPU Vref level |
| - PLAT-9542: HDD detection failure after update StoneyPI 1.3.0.0 |
| - PLAT-9669: [ST] PSP Firmware Release 0.6.0.1A |
| - PLAT-9670: [BR/CZ] PSP Firmware Release 0.5.0.27 |
| - PLAT-6896: S3 resume fail with NB P-states disabled |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.3.0.1 Release Date: Jul 2016 |
| File: StoneyPI_1_3_0_1.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev3.00 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.1 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063.1 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Bristol AM4 VBIOS v002 |
| - Stoney Generic VBIOS v006 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.15.0 |
| - Bristol AM4 1.27.18.0 |
| - Stoney 26.15.0 |
| - Stoney FT4 Fanless 33.4.0 |
| PSP - Carrizo/Bristol 0.5.0.26 |
| - Stoney 0.6.0.19 |
| PlatformBIOS - Gardenia Platform BIOS RGY1301B.FD |
| Jadeite Platform BIOS RJD1301B.FD |
| Myrtle Platform BIOS RMY1301B.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| CarrizoFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.3.0.0 |
| - PLAT-9533: Enable AGESA Programming for PT SI function |
| - PLAT-9532: [PT] PT FW update to 160622_40_F6_00 |
| - PLAT-9453: Missmatching data type in SW SMI handler |
| - PLAT-9502: [CZ/BR] PSP Firmware Release 0.5.0.26 |
| - PLAT-9458: [ST] PSP Firmware Release 0.6.0.19 |
| - PLAT-9233: Fix alignment error in DQS2DACCESS definition |
| - PLAT-9221: Error Recovery not working with a bad DIMM in channel A |
| - PLAT-9215: Add LoadPkgPowerParameters for the ALIB DPTCi function |
| - PLAT-9022: [BR] BSOD 0x124 and reboot after S3 resume |
| - PLAT-9139: [BR AM4] SMU Firmware Release 1.27.18.0 |
| - PLAT-6650: DDR4 Memory Timing improvements/fixes |
| - PLAT-8818: [ST] 2DPC memory imbalance margin improvement |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.3.0.0 Release Date: Jun 2016 |
| File: StoneyPI_1_3_0_0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.06 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.07 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.3.0.0 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v063 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Bristol AM4 VBIOS v002 |
| - Stoney Generic VBIOS v006 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.15.0 |
| - Bristol AM4 1.27.16.0 |
| - Stoney 26.15.0 |
| - Stoney FT4 Fanless 33.4.0 |
| PSP - Carrizo/Bristol 0.5.0.24 |
| - Stoney 0.6.0.17 |
| PlatformBIOS - Gardenia Platform BIOS RGY1300D.FD |
| Jadeite Platform BIOS RJD1300D.FD |
| Myrtle Platform BIOS RMY1300D.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.2.0.0 |
| - PLAT-9082: [CZ/BR] PSP Firmware Release 0.5.0.24 |
| - PLAT-9109: [PT] Add 75ms delay to avoid PT-PCIE link enter recovery mode when |
| fails to loading PT FW |
| - PLAT-9108: [PT] Add 75ms delay to avoid PT-PCIE link enter recovery mode after |
| loading PT FW |
| - PLAT-8956: [PT] Fail to Initial PROM XHCI FW if GPP PCI-E running at Gen3 |
| - PLAT-9046: FCH MISCx50[16] should not be set |
| - PLAT-8990: [ST] PSP Firmware Release 0.6.0.17 |
| - PLAT-8939: [ST] Fanless SMU Firmware Release 33.4.0 |
| - PLAT-7587: [BR] Intermittent Azalia verb programming failure on non-GPU OPN |
| - PLAT-8924: [PT] Switch back to ROM code when loading PT FW fails |
| - PLAT-8889: [CZ/BR] Duplicate RxDly/TxDly compensation on both DCT |
| - PLAT-8882: [CZ/ST] DDR3 On-DIMM Thermal Sensor not functional |
| - PLAT-8876: [PT] Leave PT SI programming to PT FW |
| - PLAT-8825: [PT] Show post code 0xCCCC for 10s when loading PT FW fails |
| - PLAT-8837: [ST] Update BIOS setting for CacheFlushOnHaltTmr and CacheFlushTmr |
| - PLAT-8823: [PT] Promontory firmware update to 160519_40_F0_01 |
| - PLAT-8819: [CZ/ST] Mixing DDR4 configuration can not boot up |
| - PLAT-7329: [CZ/BR] Optimal termination and DQ delay for 2DPC margin |
| - PLAT-8797: [PT] Add interface for USB3.1/3.0/2.0 and SATA SI tuning |
| - PLAT-8718: [BR AM4] Turn off CPUID's TopologyExtensions feature flag |
| - PLAT-8722: [PT] Add PCD to enable/disable FW check after loading XHC FW |
| - PLAT-8690: [PT] Add Promontory GPIO SMM driver |
| - PLAT-8644: [BR AM4] A12-9800E P-State abnormal behavior and error message in |
| Windows event viewer |
| - PLAT-8624: Enable CPU Idle Activity Monitor by default |
| - PLAT-8621: Fix typo in PSP mutex register definition |
| - PLAT-8055: [BR AM4] Missing Graphics Specific ACPI Methods and Objects |
| - PLAT-8616: [ST] Add DMI info for A8 series |
| - PLAT-8245: 1 DIMM per channel configuration support either MA0 or MA1 |
| - PLAT-8424: Add help text information for BLDCFG_SYSTEM_CONFIGURATION |
| - PLAT-8240: [ST] SMU Firmware Release 26.15.0 |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.2.0.0 Release Date: Apr 2016 |
| File: StoneyPI_1_2_0_0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.06 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.05 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.2.0.0 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v062.1 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Bristol AM4 VBIOS v002 |
| - Stoney Generic VBIOS v006 |
| - AMD Generic GOP v1.59 |
| SMU - Carrizo 18.60.0 |
| - Bristol FP4 27.15.0 |
| - Bristol AM4 1.27.16.0 |
| - Stoney 26.14.0 |
| - Stoney FT4 Fanless 33.1.0 |
| PSP - Carrizo/Bristol 0.5.0.20 |
| - Stoney 0.6.0.14 |
| PlatformBIOS - Gardenia Platform BIOS RGY1200C.FD |
| Jadeite Platform BIOS RJD1200C.FD |
| Myrtle Platform BIOS RMY1200C.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.2086 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.0.8.0 |
| - PLAT-8247: [PT] Promontory FW update 160406_40_01_00 |
| - PLAT-8205: [ST] PSP Firmware Release 0.6.0.14 |
| - PLAT-8109: [CZ/BR] PSP Firmware Release 0.5.0.20 |
| - PLAT-8120: [CZ] SMU Firmware Release 18.60.0 |
| - PLAT-8083: [CZ/BR] Update A1 microcode patch 6118h |
| - PLAT-7763: [BR AM4] BIOS pass setting to driver for HDMI re-timer |
| - PLAT-7934: [ST] Brand String support for AMD Embedded G-Series |
| - PLAT-7725: [ST FT4] DDR4 Addr/cmd setup timing setting update |
| - PLAT-7931: [BR AM4] Sending Msg 0x86 to SMU in S3 entry |
| - PLAT-7871: [BR AM4] SMU Firmware Release 1.27.16.0 |
| - PLAT-7918: [ST FT4] Fanless SMU Firmware Release 33.1.0 |
| - PLAT-7220: CPU Idle Activity Monitor Enablement message to SMU |
| - PLAT-7761: [ST/BR] Print DQS Routing Type in HDTOUT log |
| - PLAT-7061: [CZ/BR] Add option to configure DDR Rx delay Tx delay |
| - PLAT-7668: PMU message block option TXdly for Diasy chain Topology |
| - PLAT-7252: Add a customer table entry to specify the DQS routing type |
| - PLAT-7533: Disable Compliance mode for XHCI controller |
| - PLAT-7545: Fix potential overflow of PspLibTimeOut |
| - PLAT-7536: [ST] Set ULV_MASK bit in SMU enablement message for TDP 6W OPN |
| - PLAT-7508: Update PSP HSTI driver |
| - PLAT-7488: [ST] Enable autopopdown exit on TDP 6W OPN |
| - PLAT-6827: BTS error after S3 on EHCIx54 and EHCIx64 |
| - PLAT-7422: Add mutex to ensure PSP SMI register atomic operation |
| - PLAT-7335: Update HDTOUT to version 2.5.3 |
| - PLAT-7248: Obsolete IO (based at PMIOx6C) takes IO decoding of 0x00 |
| - PLAT-7201: [ST] SMU Firmware release 26.14.0 |
| - PLAT-7191: [BR AM4] Individual USB port enable/disable function on PT |
| - PLAT-7123: [BR AM4] Incorrect SATA class code for RAID |
| - PLAT-5292: [BR AM4] Disable CLKRUN by default |
| - PLAT-6766: [CZ] Incorrect ECC capability in SMBIOS |
| - PLAT-6980: Changed 2DPC mix configs SR+DR/DR+SR @1866 M0 Tcl value to Tcl-1 |
| - PLAT-6600: [BR AM4] SPI speed default setup in BIOS is 33Mhz |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.0.8.0 Release Date: Feb 2016 |
| File: StoneyPI_1_0_8_0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.04 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.03 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Bristol Ridge in AM4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.0.8.0 for Family 15h Model 70h - 7Fh (Stoney) |
| and Family 15h Model 60h - 6Fh (Bristol) platform solutions |
| CPM - Common Platform Module v061 for Bristol/Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Stoney Generic VBIOS v005 |
| - AMD Generic GOP v1.59 |
| PlatformBIOS - Gardenia Platform BIOS RGY1080C.FD |
| Jadeite Platform BIOS RJD1080C.FD |
| Myrtle Platform BIOS RMY1080C.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| BristolAm4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.46.43 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.1936 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 1.0.0.0 |
| ** Include Bristol AM4 support ** |
| - PLAT-7009: [BR AM4] Update PT FW 160202_40_01_02 |
| - PLAT-6945: [ST] PSP Firmware Release 0.6.0.10 |
| - PLAT-6944: [BR FP4] PSP Firmware Release 0.5.0.1B |
| - PLAT-6804: [BR AM4] Add SODIMM support |
| - PLAT-6730: [BR AM4] SMU Firmware Release 1.27.15.0 |
| - PLAT-6153: [BR AM4] Add option for over-clock on/off |
| - PLAT-6677: Override PLL setting according to fuse |
| - PLAT-6559: Add PcieEarlyWrapperTxPresetLoadingSequence and change RX preset |
| value to 0x2 |
| - PLAT-6623: [BR/CZ] 4:1:1:1:1 PCIe configuration does not support lane muxing |
| - PLAT-6553: [ST] FP4 2DPC low margins solution fix |
| - PLAT-6145: Extend TPM command timer from 2s to 120s |
| - PLAT-6538: IMC is dead after S3 resume when XHCI is disabled in Device Manager |
| - PLAT-6539: SSID of XHCI is not restored after S3 if XHCI is disabled in |
| Device Manager |
| - PLAT-6557: DDR4 1DPC SR and 1of2 SR changed RTT_PARK from 60 to 48ohm |
| - PLAT-5643: A0bb in S3 resume when XHCI is disabled in Device Manager |
| - PLAT-5840: [PT] Update AGESA FCH to support Promontory FW replacement |
| - PLAT-5856: [BR AM4] Margin improvement for 2400 1DPC SR |
| - PLAT-6010: [BR AM4] Add SATA RAID mode support |
| - PLAT-5868: USB over current control does not match BKDG |
| - PLAT-6231: Provide interface for sending command to TA |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 1.0.0.0 Release Date: Jan 2016 |
| File: StoneyPI_1_0_0_0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.04 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.03 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 1.0.0.0 for Family 15h Model 70h - 7Fh (Stoney) |
| platform solutions |
| CPM - Common Platform Module v059 for Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Stoney Generic VBIOS v005 |
| - AMD Generic GOP v1.59 |
| PlatformBIOS - Gardenia Platform BIOS RGY1000B.FD |
| Jadeite Platform BIOS RJD1000B.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.44.27 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.1936 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.8.1 |
| - PLAT-6411: Reduce memory training time by eliminating PMU messages |
| - PLAT-5708: Add setTokenFlag P2C command to reduce delay in PSP FW |
| - PLAT-6306: [ST] PSP Firmware release 0.6.0.D |
| - PLAT-6304: [BR/CZ] PSP Firmware release 0.5.0.17 |
| - PLAT-6377: [ST] SMU Firmware Release 26.12.0 |
| - PLAT-6228: Disable SATA D3 Cold |
| - PLAT-6079: Update PMIOx08[20] ShutDownOption setting |
| - PLAT-6143: [ST] Retry for intermittent PMU 2D training failure |
| - PLAT-5840: Reserve entry 0x1B in PSP directory |
| - PLAT-5801: [BR] Disable SCLK Stretcher on AM4 package |
| - PLAT-5698: [BR] Add RAID support for AM4 package |
| - PLAT-5654: [PSP] Remove the incorrect ASSERT |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 0.0.8.1 Release Date: Dec 2015 |
| File: StoneyPI_0_0_8_1.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.03 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.02 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 0.0.8.1 for Family 15h Model 70h - 7Fh (Stoney) |
| platform solutions |
| CPM - Common Platform Module v058.1 for Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Stoney Generic VBIOS v005 |
| - AMD Generic GOP v1.59 |
| PlatformBIOS - Gardenia Platform BIOS RGY0081C.FD |
| Jadeite Platform BIOS RJD0081C.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.44.27 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.1936 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.8.0 |
| - PLAT-5999: [BR] Brand String support for A4, PRO A4 and Athlon X4 series |
| - PLAT-6119: [BR] SMU FW release 27.15.0 |
| - PLAT-6114: [ST] PSP FW release 0.6.0.0C |
| - PLAT-6082: [ST] Memory Section Update from BKDG 1.03 |
| - PLAT-6019: [ST] Update A0 microcode patch 6704 |
| - PLAT-6022: [CZ/BR] Update A1 microcode patch 6115 |
| - PLAT-5968: [BR/CZ] Retry for intermittent PMU 2D training failure |
| - PLAT-6118: [ST] SMU FW release 26.11.0 |
| - PLAT-6115: [BR] PSP FW Release 0.5.0.16 |
| - PLAT-5591: [ST] FT4 25W unable to transition to DPM7 (800Mhz) |
| - PLAT-5671: Adjust PHY impedance calibration value by 3 for all XHCI USB2 ports |
| - PLAT-5672: [ST] Turn off CPUID's TopologyExtensions feature flag |
| - PLAT-5648: [ST] Brand String support for A9 and E2 series |
| - PLAT-5616: [CZ] SMU firmware release 18.58.0 |
| - PLAT-5579: Incorrect Common Clock setting on Upstream port and End Point that |
| is not in function 0 |
| - PLAT-5490: Simplified MemRestore in support of Capsule Mode by way of S3 |
| - PLAT-5486: Ignore PSP BAR MSR programming if already set |
| - PLAT-3098: Fix incorrect address of PCIE Ready message when plug NIC |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 0.0.8.0 Release Date: Dec 2015 |
| File: StoneyPI_0_0_8_0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.03 (#55072) |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 60h-6Fh rev3.02 (#50742) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 0.0.8.0 for Family 15h Model 70h - 7Fh (Stoney) |
| platform solutions |
| CPM - Common Platform Module v058 for Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v030 |
| - Stoney Generic VBIOS v004 |
| - AMD Generic GOP v1.59 |
| PlatformBIOS - Gardenia Platform BIOS RGY0080C.FD |
| Jadeite Platform BIOS RJD0080C.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.44.27 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.1936 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.7.0 |
| - PLAT-5263: Extra audio end points in display HD audio device D1:F1 |
| - PLAT-5381: [ST] SMU FW release 26.8.0 |
| - ENH468077: [BR] SMU FW release 27.14.0 |
| - PLAT-5371: [ST] PSP FW release 0.6.0.9 |
| - PLAT-5339: [BR/CZ] PSP FW release 0.5.0.13 |
| - PLAT-2783: Intermittent semaphore error in MP service |
| - PLAT-4956: [ST] Enable SATA dynamic PLL shutdown |
| - PLAT-5023: [ST] Disable xHCI D3 cold |
| - PLAT-2781: Update xHC USB2.0 Common PHY Impedance Calibration |
| - PLAT-5001: [BR] Customize SATA PHY settings based on trace length |
| - PLAT-5026: [ST] BLDCFG_GPU_FREQUENCY_LIMIT feature need to override SclkDid |
| - PLAT-5009: [CZ/BR] BLDCFG_GPU_FREQUENCY_LIMIT feature need to override SclkDid |
| - PLAT-5020: [BR] Disable xHCI D3 cold |
| - PLAT-5013: [ST] Illegal combination of BankSwap/BankSwapAddr8En/DctSelBankSwap |
| - PLAT-4959: Remove FCH Azalia code |
| - PLAT-4927: Mismatched data structure in C and ASL file |
| - PLAT-4978: FCH SD Controller can not detect SD card when in SD 2.0 mode |
| - PLAT-4926: [BR] 2133 x/DR low margin improvement |
| - PLAT-2625: Common SMBIOS Type 17 shows incorrect information on DDR4 |
| - PLAT-4913: [ST] BIOS should disable SMU feature ULV by default |
| - PLAT-4868: [ST] Enable DFS BYPASS |
| - PLAT-3080: [ST] Enable fix for SATA dynamic PLL shutdown |
| - PLAT-3052: [CZ] Add A1 microcode patch 6113 |
| - PLAT-2935: [ST] Revert to CZ Display underflow |
| - PLAT-2937: Limit support on "Far DIMM slot" for 1 of 2 DIMM configuration |
| - PLAT-2854: [ST] Disable SMU post code by default |
| - PLAT-2933: Update bridge interrupt selection in IOAPIC |
| - PLAT-2852: [ST] Add A0 microcode patch 6703 |
| - PLAT-2917: [CZ] Memory coding errors |
| - PLAT-2750: Move PSP S3Script for PspDxe to PspSmm |
| - PLAT-2791: Disable IRQ routing for INTE# |
| - PLAT-2792: Update GNB IOAPIC routing not to use INTE/F |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2682: HDTOUT script cannot work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 0.0.7.0 Release Date: Oct 2015 |
| File: StoneyPI_0_0_7_0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.02 (#55072) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| Supported processors: |
| - Stoney Ridge in FP4 and FT4 package |
| - Bristol Ridge in FP4 package |
| - Carrizo in FP4 package |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 0.0.7.0 for Family 15h Model 70h - 7Fh (Stoney) |
| platform solutions |
| CPM - Common Platform Module v056 for Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v028 |
| - Stoney Generic VBIOS v003 |
| - AMD Generic GOP v1.59 |
| PlatformBIOS - Gardenia Platform BIOS RGY0070F.FD |
| Jadeite Platform BIOS RJD0070F.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.44.27 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.1931 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.6.0 |
| - PLAT-3081: Disable DFS_Bypass in PI 0.0.7.0 RC6 to work around PLAT-2717 |
| - PLAT-2424: Bristol Ridge USB3.0 TSSC Fail |
| - PLAT-2873: [BR/CZ] PSP FW release 0.5.0.F |
| - PLAT-2874: [ST] PSP FW release for 0.6.0.6 |
| - ENH467447: [BR] FP4 SMU FW 27.12.0 Release |
| - PLAT-2857: [ST GNB] Should report single channel memory in System Info Table |
| - PLAT-2855: [ST] STONEY SMU FW RELEASE 26.3.0 |
| - ENH467300: [BR] Enable AutoPopDownExit feature and set PopDownPstate |
| - PLAT-2808: [CZ] Send SMU GpuPowerDown service request if GPU_DIS = 1 |
| - PLAT-2807: [CZ] SMU Firmware release 18.57.0 |
| - PLAT-2764: Parade HDCP2.2 DP->HDMI chip Support |
| - PLAT-2340: Incorrect programming of D18F3xA8[HwPstateMaxVal] |
| - PLAT-2474: [BR] DDR4 S3 resume fails at DDR2400 |
| - PLAT-2578: AGESA should halt if SMU returns SMC_FATAL response |
| - PLAT-2299: [ST] DDR4: Disable Bank Group Mirror for x16 DIMMs |
| - PLAT-1507: [BR] DDR4 2400 support with cTDP 35W |
| - PLAT-2515: BLDCFG_GPU_FREQUENCY_LIMIT not functional |
| - PLAT-2569: USB3 PHY setting update |
| - PLAT-2321: SD SSID changed when run S3 some loops on Win7 |
| - PLAT-2525: [ST] GMC programming Guide update |
| - PLAT-2520: [BR] NbPstateThreshold register is set to 0 when 2CU enabled |
| - PLAT-2530: [BR] Update SCS data file name |
| - PLAT-2145: [BR] Thermal Controller Verification failed |
| - PLAT-2149: [BR] Request to change Onion3 priority on BR from Low to Medium |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2682: HDTOUT script cannot work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 0.0.6.0 Release Date: Sep 2015 |
| File: StoneyPI_0.0.6.0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.02 (#55072) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 0.0.6.0 for Family 15h Model 70h - 7Fh (Stoney) |
| platform solutions |
| CPM - Common Platform Module v055 for Stoney platform solution |
| VBIOS - Carrizo Generic VBIOS v028 |
| - Stoney Generic VBIOS v001 |
| - AMD Generic GOP v1.59 |
| PlatformBIOS - Gardenia Platform BIOS RGY0060C.FD |
| Jadeite Platform BIOS RJD0060C.FD |
| StoneyFp4Options.c |
| StoneyFt4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.44.27 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.1931 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.5.0 |
| - ENH467090: [BR FP4] SMU FW 27.9.0 Release |
| - PLAT-2431: Add sample code for PSP Directory |
| - PLAT-2436: [BR] Restore lost precision for tCCD_L @ DDR2400 |
| - PLAT-2435: Disable SelfRefreshAbort |
| - PLAT-2388: [ST FT4] Add UDIMM MaxFreq table support |
| - PLAT-2422: Fix D18F3xDC[HwPstateMaxVal] programming |
| - PLAT-2429: CloseEvent for PCI enumeration callback in PSP DXE driver |
| - PLAT-2414: [BR] PSP FW release 0.5.0.0C |
| - PLAT-2269: [ST] Correct CkeToCsMap for FT4 |
| - PLAT-2248: [BR] Set default TDP according to the actual fuse |
| - PLAT-2274: Disable post code in _PS0/_PS3 by default |
| - PLAT-2347: [ST] Disable BTC by default |
| - DESPCNB-77: Change BIOS Recommendation to 2h |
| - ENH461599: [CZ] Declare PSP Bar3 in EFI_MEMORY_RUNTIME |
| - PLAT-2329: Update PSPEntryInfo according to the processor installed |
| - PLAT-2328: [ST] Add S3 NVRAM binary |
| - PLAT-2325: [ST] Remove Pcie TxPreset loading sequence |
| - PLAT-2317: Set BankSwapOnly=Enabled & BankGroupSwap=Disabled by default |
| - PLAT-2310: [ST] Set default engine clock(SCLK) to 400MHz |
| - PLAT-2309: [ST] PCI ACS enable request |
| - PLAT-2308: [ST] Increase N_FTS request |
| - PLAT-2307: [ST] Set REG_HPGI_PRESENCE_DETECT_STATE_CHANGE_EN = 1 |
| - PLAT-2306: [ST] ACP Power Gating |
| - PLAT-2305: [ST] Bring-up SMU f/w release 26.1.25 |
| - PLAT-2292: [ST] Set PIF_DEGRADE_PWR_PLL_MODE =0x0 |
| - PLAT-2290: [ST] Remove SB link info function |
| - PLAT-2289: [ST] update GNB code to load correct SCS data |
| - PLAT-2287: [ST] update GNB fuse table |
| - PLAT-2286: [ST] Force PCIe GPP reconfig even PCIe config does not changed |
| - PLAT-2285: [ST] incorrect MainPllOpFreqIdStartup value set to ulDentistVCOFreq |
| - PLAT-2284: [ST] Update BTC - fuse bit location changed |
| - PLAT-2301: Two more configs for power optimization sync for DDR4 |
| - PLAT-2281: Add Time out mechanism for fTPM command execution |
| - PLAT-2268: DDR4 Power optimization sync |
| - PLAT-2222: [ST] Update ST BKDG MRL Training sequence so fudge is not padded |
| - PLAT-2219: [ST] Change CkeToCsMap for FT4 |
| - PLAT-1353: [ST] FCH code doesn't match BKDG recommended value |
| - PLAT-2188: Update ST debug unlock key |
| - PLAT-2187: [ST] Add DDR3 FT4 Memory Stretch Frequency table |
| - PLAT-2186: [ST] Enable DDR4 option in FT4 in PlatformInstall.h |
| - PLAT-2181: [ST] FT4 PkgId should be 4 |
| - PLAT-2179: SwUsb3SlpShutdown should not be set when other bits are touched |
| - PLAT-2178: [ST] NPST related fuse location was changed |
| - PLAT-2174: [ST] Add Memory support for FT4 |
| - ENH466732: Program LFPS Detect Threshold value based on the fuse value |
| - PLAT-2077: Frame Buffer Carve Out option for Hybrid Secure Frame Buffer |
| - ENH466739: [CZ] update DMI ProcFamily table |
| - PLAT-2127: [CZ] Disable BankGroupSwap by default |
| - PLAT-2091: Set SwNbPstateLoDis to force the NB Pstate in ALIB |
| - PLAT-2060: [CZ] Intialize original WrDat2dDlys before making an override |
| - PLAT-2022: ACPI_ATCS_PCIEDEVICEREADY is taking 37 ms |
| - PLAT-2065: [ST] PSP FW release for 0.6.0.2 |
| - PLAT-1300: fTPM no functional after S0i3 resume |
| - PLAT-2027: BuildPspDirectory Update to 1.28 |
| - PLAT-1276: [ST] Set the VDDP for bootup and S-states based on different OPN |
| - PLAT-1959: Incorrect pGpioTbl->GpioPin setting in FchPeLib.c |
| - PLAT-1948: [BR] BTCGBV message needs to be sent after shadowPstates |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| - PLAT-2682: HDTOUT script cannot work |
| - PLAT-2536: S3 resume fail with core leveling |
| |
| ============================================================================= |
| Version: 0.0.5.0 Release Date: Aug 2015 |
| File: StoneyPI_0.0.5.0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.01 (#55072) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 0.0.5.0 for Family 15h Model 70h - 7Fh (Stoney) |
| platform solutions |
| CPM - Common Platform Module v054 for Stoney platform solution |
| VBIOS - Carrizo Generic VBios v027 & Gop v1.59 |
| PlatformBIOS - Gardenia Platform BIOS RGY0050A.FD |
| Jadeite Platform BIOS RJD0050A.FD |
| gardenia_st_family15h.bsd file |
| StoneyFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.44.27 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.1928 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.3.0 |
| - PLAT-2011: [BR] PSP FW release for 0.5.0.08 |
| - PLAT-1959: Incorrect pGpioTbl->GpioPin setting in FchPeLib.c |
| - PLAT-1987: [CZ] PSP FW release 0.2.0.37 |
| - PLAT-1948: [BR] BTCGBV message needs to be sent after shadowPstates |
| - PLAT-1796: [CZ] Create S3 entry for D18F2x9C_x0081_0[F,2:0]77_dct[1:0] |
| - PLAT-1910: KB and mouse doesn't work on USB2.0 port |
| - PLAT-1915: [BR] Disable shadowPstates if AVFS CBS option is disabled |
| - PLAT-1203: [BR] FCH SD Controller cannot detect SD card when D3 disabled |
| - ENH466493: BR SMU FW 27.5.0 Release |
| - PLAT-1354: [ST] FCH code doesn't match BKDG |
| - PLAT-1353: [ST] FCH code doesn't match BKDG recommended value |
| - PLAT-1878: [ST DDR4] Missing Mem Controller settings to update DqVref for |
| mpstate change |
| - PLAT-1849: New brand string 'AMD Embedded G-Series GX-' |
| - BUG465142: [CZ] ECC error injection fails |
| - PLAT-1851: [CZ/BR] IMC firmware update for fan startup PWM |
| - PLAT-1691: [CZ/BR] IMC interface update for startup PWM |
| - PLAT-1842: C Style Check Failure |
| - PLAT-1769: Configure GPIO for UART0/1 pins based on user setting |
| - ENH466338: HGST/WD HDDs will downgrade to gen2 from gen3 on Carrizo |
| - PLAT-1847: [PSP-ST] PSP FW release for 0.6.0.1 |
| - PLAT-1838: [CZ DDR4] Missing Mem Controller settings to update DqVref for |
| mpstate change |
| - BUG462525: [CZ] PrototypeCheck Issue of Memory |
| - ENH466386: [CZ] sync changes from EDKII package to EDK |
| - PLAT-1687: [CZ] Remove delay for SD D3 if SDIO WLAN is disabled |
| - PLAT-963: Carrizo Reboot cycling hang at PC F582 under Win10 |
| - ENH466381: Move USB 3 D3 Cold routine to SMI |
| - PLAT-1795: [CZ] Optimize Trcpage calculation |
| - PLAT-1784: SMU Cooling Table from BIOS/SCS not getting loaded correctly |
| - PLAT-1774: [CZ] Need to check iGPU first before access GMM registers |
| - PLAT-1771: [ST] Need to check iGPU first before access GMM registers |
| - PLAT-1715: [CZ] Report all cores as single-threaded to the OS |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| |
| ============================================================================= |
| Version: 0.0.3.0 Release Date: Jul 2015 |
| File: StoneyPI_0.0.3.0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev1.00 (#55072) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| ============================================================================= |
| 1. Package contents |
| |
| AGESA - AGESA Arch2008 0.0.3.0 for Family 15h Model 70h - 7Fh (Stoney) |
| platform solutions |
| CPM - Common Platform Module v052 for Stoney platform solution |
| VBIOS - Carrizo Generic VBios v027 & Gop v1.59 |
| PlatformBIOS - Gardenia Platform BIOS RGY0030A.FD |
| gardenia_st_family15h.bsd file |
| StoneyFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.44.27 |
| BIOSTestSuite - BIOSTestSuite v8.0.12.1920 |
| |
| 2. AGESA ENHANCEMENTS and FIXED BUGS after 0.0.1.0 |
| - PLAT-1666: [CZ] Create a CBS option to tune address command timing |
| - ENH466054: Change PspDxe from using Depex to Protocol notification |
| - ENH466193: PspDxeReadyToBoot code change to support clear SMMLock in CC6 |
| memory feature |
| - ENH466194: Add command 0x17 to clear SMMLock bit in CC6 private memory |
| - ENH466166: PSP FW 0.2.0.33 Carrizo release |
| - PLAT-1480: [CZ] TPM2.0 device shows yellow bang in device manager |
| - PLAT-1632: [ST] Incorrect PcieLateRestoreCZS3Script_ID |
| - PLAT-1499: PSP buildDirectorytool Update to Version 1.2.7 |
| Add new required parameter "-V" for "DP" subcommand |
| - PLAT-1419: [BR] PSP FW release for 0.5.0.04 |
| - PLAT-1481: New CBS Enable/Disable option for "ACC" |
| - ENH466098: BR SMU FW 27.3.0 Release |
| - PLAT-1498: [CZ] BIOS init time exceed criteria on ADK test with fTPM enabled |
| - PLAT-1389: [CZ][DDR4] Incorrect memory type info is passed to driver |
| - PLAT-1284: [ST] Boot fail(hang at POST) on DDR4 platform |
| - PLAT-1304: [BR] Add new SMU option for 'Reliability Controller' |
| - PLAT-1423: [ST] Sync up DDR4 code |
| - PLAT-1364: [BR] Add a CBS option for shadowPstates |
| - BUG464411: SPI Normal Read Bus Interface test failed |
| - ENH465911: Incorrect XHCI SSID programming in D3 cold entry/exit |
| - BUG465941: Intermittent hang upon cold reset or power on cycling |
| - ENH465788: Setup option for DRAM terminations |
| - PLAT-1331: C Style Checker Fail |
| - PLAT-1338: [BR] add VID:DID/1B21:0612 into Payload Blacklist Device Table |
| - PLAT-1325: [BR] change Bristol Ridge AVFS BIOS default setting to Enable |
| - ENH465927: [CZ] Enable MMIO decode in iTpmGetResponse |
| - ENH462938: Add AGESA option to control PMxC0[0] ThermalTrip status |
| - ENH465899: [CZ] set On3FreeCmdLmt = 5 |
| - ENH465853: CZ SMU FW 18.56.0 |
| - PLAT-1290: [ST] Incorrectly invoking a CZ routine in mndctst.c |
| - ENH465834: Update DRAM ZQ/CKE to CS Map per BKDG |
| |
| 3. Known Issues/Limitations |
| - BUG450152: Crisis Recovery does not work |
| |
| ============================================================================= |
| Version: 0.0.1.0 Release Date: Jun 2015 |
| File: StoneyPI_0.0.1.0.ZIP |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - Preliminary BIOS and Kernel Developer's Guide Family 15h Models |
| 70h-7Fh rev0.13 (#55072) |
| - AGESA Arch2008 Interface Specification, Revision v3.00 (#44065) |
| |
| ============================================================================= |
| |
| * First version of Stoney Platform Initialization package that includes |
| Processor initialization code for IBV/OEM platform BIOS Development. |
| |
| StoneyPI_0.0.1.0.ZIP hasn't been through AMD internal QA process, but completed |
| BIOS verification using SimNow. |
| |
| 1. As previously communicated the purpose of the 0.1 release of StoneyPI is |
| to provide customers with an early look at the new Architecture 2008 |
| platform initialization library for Stoney. The 0.1 release |
| is intended to be: |
| a. 100% API complete |
| b. able to boot a single fixed configuration under SimNow |
| |
| Per plan, the 0.1 release is NOT code complete or feature complete. Key |
| features may be stubbed out, incomplete and/or buggy. Features may not |
| function if used outside of the fixed demonstration configuration. |
| |
| Customers are able to use the 0.1 release to prepare their wrappers and |
| conduct limited testing with the StoneyPI code under SimNow. AMD |
| welcomes your feedback on this 0.1 release. |
| |
| The following future releases beyond 0.0.1.0 are planned: |
| |
| 0.3 - 100% code complete and feature complete, functionality |
| largely untested |
| |
| 0.5 - Pre bring-up -Thoroughly tested under SimNow |
| |
| 0.6 - Alpha release - code brought-up on real silicon, QA passed |
| |
| 0.7 - Beta release / EVT - lab characterization data incorporated |
| |
| 0.9 - Production Release Candidate / DVT |
| |
| 1.0 - Production Release |
| |
| Additional intermediate releases may be issued as deemed necessary. |
| |
| 2. Package contents |
| |
| AGESA - AGESA Arch2008 0.0.1.0 for Family 15h Model 70h - 7Fh (Stoney) |
| platform solutions |
| CPM - Common Platform Module v052 for Stoney platform solution |
| VBIOS - Carrizo Generic VBios v026 & Gop v1.58 |
| PlatformBIOS - Gardenia Platform BIOS RGY0010B.FD |
| gardenia_st_family15h.bsd file |
| StoneyFp4Options.c |
| Specification - AGESA Arch2008 Interface specification v3.00 |
| Tools - AMD BIOSDBG v1.44.27 |
| |
| 3. Build Instructions |
| To be added later |
| |
| 4. Known Issues/Limitations |
| ============================================================================= |
