| |
| Release Notes for |
| ----------------- |
| Kaveri Platform Initialization (KaveriPI) |
| |
| |
| ============================================================================= |
| |
| Version: 1.1.0.5 Release Date: May 2014 |
| File: KaveriPI_1.1.0.5.ZIP |
| |
| NOTE: This Release supports of Kaveri FP3. |
| |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.02 (#49125) |
| - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) |
| |
| ============================================================================= |
| |
| 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.4: |
| |
| - BUG443092: Check BIOS source file's Copyright release date failed |
| - ENH443877: SMU Firmware Release 13.46.0 |
| - ENH443253: Core voltage offset trim workaround |
| - ENH442877: Need platform-specific default for PCIe refclk SS percentage |
| |
| |
| |
| ============================================================================= |
| |
| Version: 1.1.0.4 Release Date: Apr 2014 |
| File: KaveriPI_1.1.0.4.ZIP |
| |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.02 (#49125) |
| - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) |
| |
| ============================================================================= |
| |
| 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.3: |
| |
| - ENH442451: GNB mask VCE to DPM2 for low-power OPNs |
| - ENH442580: SMU Firmware Release 13.43.0 |
| - BUG441102: Add SMBIOS support for FX branded APUs |
| - ENH441398: RESET SMBUS controller instead of KILL when contention happens |
| |
| |
| |
| ============================================================================= |
| |
| Version: 1.1.0.3 Release Date: Mar 2014 |
| File: KaveriPI_1.1.0.3.ZIP |
| |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.02 (#49125) |
| - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) |
| |
| ============================================================================= |
| |
| 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.2: |
| |
| - BUG438610: MEM_ERROR_NO_DIMM_FOUND_ON_SYSTEM is not recorded if no DRAMs plugged in system |
| - BUG439256: New brandstrings not recognized by SMBIOS |
| - ENH439842: SMU Firmware Release 13.40.0 |
| |
| |
| |
| ============================================================================= |
| |
| Version: 1.1.0.2 Release Date: Mar 2014 |
| File: KaveriPI_1.1.0.2.ZIP |
| |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.01 (#49125) |
| - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) |
| |
| ============================================================================= |
| |
| 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.1: |
| |
| - ENH436605: SMU Firmware Release 13.38.0 |
| - ENH436593: Update L2 Resizing Settings for KV in BIOS |
| - ENH436063: Replace all 2.0Ghz CCLK Pstate with 1.9Ghz CCLK |
| |
| |
| ============================================================================= |
| |
| Version: 1.1.0.1 Release Date: Feb 2014 |
| File: KaveriPI_1.1.0.1.ZIP |
| |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.00 (#49125) |
| - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) |
| |
| ============================================================================= |
| |
| 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.1.0.0: |
| |
| - ENH435365: Force SVI2 speed to 3.4M on both desktop and mobile platform |
| - BUG427334: CPU Current limiting causes system to not boot |
| - ENH435699: Change Default Upstream TX Preset to be P2 |
| - ENH425325: Gen3 Equalization Back up Preset Search |
| - ENH435871: SMU Firmware Release 13.36.0 |
| - ENH435360: Update Brand Strings for BIOS override for NB and DT Kaveri APUs |
| - BUG434640: D18F3x40 may be cleared unexpectedly |
| - ENH430917: Disable PCIe PHY RX power gating for Gen3 hotpluggable ports |
| - ENH434745: Implement Brand Name String override for initial launch products |
| - ENH433544: KV platform power policy default change |
| - ENH433708: Update PMU to revision 47e9 |
| - BUG433606: Gen3 PHY settings not set when PSPP = Balanced Low |
| - BUG418184: Detailed DRAM error data is not being returned in multi-bit error condition |
| - BUG433181: For Asymmetric Config on DCTs, Framebuffer does not fall on interleaved region |
| - ENH433454: Set "SataClkAutoOff" to "enable" with default |
| - BUG431554: No video after resume from S3 with External Graphics setting |
| - BUG432394: Disabling audio controller does not completely disable config space |
| - ENH432731: Move display panel power-up later in POST |
| - ENH431848: KV GMC memory hole programming update |
| - ENH431556: KV CPU: 3.00 BKDG updates |
| - ENH429614: OSCOUT1_CLK_sel and serial IRQ mode |
| - ENH426022: Enabled FB in interleave region when memory is mismatched |
| |
| |
| ============================================================================= |
| |
| Version: 1.1.0.0 Release Date: Jan 2014 |
| File: KaveriPI_1.1.0.0.ZIP |
| |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v3.00 (#49125) |
| - AGESA Arch2008 Interface Specification, Revision v2.20 (#44065) |
| |
| ============================================================================= |
| |
| 2. Agesa ENHANCEMENTS and FIXED BUGS after 1.0.8.0: |
| |
| - ENH431381: Kaveri_Firmware_13_30_0 |
| - ENH426796: Enhancements for AMP 2400 settings to support another dram vendor Hynix |
| - ENH426806: PMU to support Read-Modify-Write for F2x9C_x00 [F,8:0]1_[F,B:0]04A_dct[3:0] |
| - ENH428498: 1.13 BKDG updates. |
| - BUG427856: Integrated Info Table TDP values are not correct |
| - ENH427987: NB Machine Check Control Mask need to be set when NB PG is enabled. |
| - ENH426490: Add PCIe flow control credit programmability to RL CMOS options |
| - ENH426343: Add PCIe flow control credit programmability to KV CMOS options |
| - BUG427192: F15TnRegisterTablesAfterApLaunch table is not programmed for TN/RL |
| - BUG409150: SMBIOS information show incorrect. |
| - BUG426026: Mismatched header file name |
| - BUG426965: When Power off PLLs are set to disabled SUT will stop POST at D3E7 |
| - ENH427012: AGESA FCH support DISP2_CLK option for Kaveri |
| - ENH425521: Can't disable "Unused SATA Port Auto Shut Down" feature. |
| |
| |
| ============================================================================= |
| |
| Version: 1.0.8.0 Release Date: Dec 2013 |
| File: KaveriPI_1.0.8.0.ZIP |
| |
| ============================================================================= |
| |
| Compliant to specs: PID# |
| - BIOS and Kernel Developer's Guide (Family 15h Models 30h-3Fh) v1.12 (#49125) |
| - AGESA Arch2008 Interface Specification, Revision v2.12 (#44065) |
| |
| ============================================================================= |
| |
| 2. Agesa ENHANCEMENTS and FIXED BUGS after 0.0.8.2: |
| |
| - BUG425988: PPD core lane 0 is ungated |
| - BUG416513: Setting CPU Current Limit Control causes DEAD POST |
| - ENH424783: Disable UNB power gating on KV FM2 |
| - BUG424796: Hang during POST when GFX(PGD)Wrapper and GPP(PPD)Wrapper are disabled |
| - ENH423903: Defer setting of EnCstateBoostBlockCC6Exit to later in boot sequence |
| - ENH424783: Disable UNB power gating on KV FM2 |
| - ENH424667: KV SMU FW release 13.26.1 |
| - ENH424067: Add Cpu Type 4 designators for Kv FM2r2 |
| - ENH418068: Disable GFX (PGD) Wrapper, GPP (PPD) Wrapper cause system fails to post |
| - ENH423912: Add KV 1 DPC DDR-2400 "AMP" support |
| - ENH423624: Remove P_ELEC_IDLE_MODE workaround in PPD wrapper |
| - BUG424464: GMM address defined incorrectly |
| - ENH423579: Program BME and LINK_DIS for dGPU PX powerdown |
| - BUG422082: C Style Issues in Memory files |
| - ENH421743: Update PMU to 2909 - Make 2D training more reliable across parts |
| - ENH422727: Disable HTC during memory training |
| - ENH421372: Power-gate PMU SRAM on disabled Channels (saves 50mW leakage per channel) |
| - ENH421735: Apply additional ptr separation on KV for NCLK800/DDR1333 |
| - ENH421729: New KV microcode patches 06003104/0600301C |
| - ENH421148: Require DMIF_PG:DPG_PIPE_NB_PSTATE_CHANGE_CONTROL programmed for all pipes |
| - BUG421433: Memory: BTS S3 test failure |
| - ENH421956: GMC Programming updates to avoid agressive stutter |
| - ENH404706: BIOS AGESA GNB Optimization |
| |
