| project('flashromutils', 'c', |
| version : run_command('util/getversion.sh', '-v').stdout().strip(), |
| license : 'GPL-2.0', |
| meson_version : '>=0.47.0', |
| default_options : ['warning_level=2', 'c_std=c99'], |
| ) |
| |
| # libtool versioning |
| lt_current = '1' |
| lt_revision = '0' |
| lt_age = '0' |
| lt_version = '@0@.@1@.@2@'.format(lt_current, lt_age, lt_revision) |
| |
| # hide/enable some warnings |
| warning_flags = [ |
| '-Wwrite-strings', |
| '-Wno-unused-parameter', |
| '-Wno-address-of-packed-member', |
| '-Wno-enum-conversion', |
| '-Wno-missing-braces', |
| ] |
| |
| conf = configuration_data() |
| |
| cc = meson.get_compiler('c') |
| add_project_arguments(cc.get_supported_arguments(warning_flags), language : 'c') |
| add_project_arguments('-D_DEFAULT_SOURCE', language : 'c') |
| add_project_arguments('-D_POSIX_C_SOURCE', language : 'c') # required for fileno |
| add_project_arguments('-D_BSD_SOURCE', language : 'c') # required for glibc < v2.19 |
| add_project_arguments('-DFLASHROM_VERSION="' + meson.project_version() + '"', language : 'c') |
| |
| # get defaults from configure |
| config_atahpt = get_option('config_atahpt') |
| config_atapromise = get_option('config_atapromise') |
| config_atavia = get_option('config_atavia') |
| config_buspirate_spi = get_option('config_buspirate_spi') |
| config_ch341a_spi = get_option('config_ch341a_spi') |
| config_dediprog = get_option('config_dediprog') |
| config_developerbox_spi = get_option('config_developerbox_spi') |
| config_digilent_spi = get_option('config_digilent_spi') |
| config_drkaiser = get_option('config_drkaiser') |
| config_dummy = get_option('config_dummy') |
| config_ft2232_spi = get_option('config_ft2232_spi') |
| config_gfxnvidia = get_option('config_gfxnvidia') |
| config_raiden = get_option('config_raiden') |
| config_internal = get_option('config_internal') |
| config_it8212 = get_option('config_it8212') |
| config_linux_mtd = get_option('config_linux_mtd') |
| config_linux_spi = get_option('config_linux_spi') |
| config_mstarddc_spi = get_option('config_mstarddc_spi') |
| config_nic3com = get_option('config_nic3com') |
| config_nicintel_eeprom = get_option('config_nicintel_eeprom') |
| config_nicintel = get_option('config_nicintel') |
| config_nicintel_spi = get_option('config_nicintel_spi') |
| config_nicnatsemi = get_option('config_nicnatsemi') |
| config_nicrealtek = get_option('config_nicrealtek') |
| config_ogp_spi = get_option('config_ogp_spi') |
| config_pickit2_spi = get_option('config_pickit2_spi') |
| config_pony_spi = get_option('config_pony_spi') |
| config_rayer_spi = get_option('config_rayer_spi') |
| config_satamv = get_option('config_satamv') |
| config_satasii = get_option('config_satasii') |
| config_serprog = get_option('config_serprog') |
| config_usbblaster_spi = get_option('config_usbblaster_spi') |
| config_stlinkv3_spi = get_option('config_stlinkv3_spi') |
| config_lspcon_i2c_spi = get_option('config_lspcon_i2c_spi') |
| config_realtek_mst_i2c_spi = get_option('config_realtek_mst_i2c_spi') |
| |
| cargs = [] |
| deps = [] |
| srcs = [] |
| |
| need_raw_access = false |
| need_serial = false |
| |
| # check for required symbols |
| if cc.has_function('clock_gettime') |
| add_project_arguments('-DHAVE_CLOCK_GETTIME=1', language : 'c') |
| endif |
| if cc.has_function('strnlen') |
| add_project_arguments('-DHAVE_STRNLEN=1', language : 'c') |
| endif |
| if cc.check_header('sys/utsname.h') |
| add_project_arguments('-DHAVE_UTSNAME=1', language : 'c') |
| endif |
| |
| # some programmers require libusb |
| if get_option('usb') |
| srcs += 'usbdev.c' |
| srcs += 'usb_device.c' |
| deps += dependency('libusb-1.0') |
| else |
| config_ch341a_spi = false |
| config_dediprog = false |
| config_digilent_spi = false |
| config_developerbox_spi = false |
| config_pickit2_spi = false |
| endif |
| |
| # some programmers require libpci |
| if get_option('pciutils') |
| srcs += 'pcidev.c' |
| deps += dependency('libpci') |
| cargs += '-DNEED_PCI=1' |
| else |
| config_atahpt = false |
| config_atapromise = false |
| config_atavia = false |
| config_drkaiser = false |
| config_gfxnvidia = false |
| config_raiden = false |
| config_internal = false |
| config_it8212 = false |
| config_nic3com = false |
| config_nicintel_eeprom = false |
| config_nicintel = false |
| config_nicintel_spi = false |
| config_nicnatsemi = false |
| config_nicrealtek = false |
| config_ogp_spi = false |
| config_rayer_spi = false |
| config_satamv = false |
| config_satasii = false |
| endif |
| |
| # set defines for configured programmers |
| if config_atahpt |
| srcs += 'atahpt.c' |
| cargs += '-DCONFIG_ATAHPT=1' |
| endif |
| if config_atapromise |
| srcs += 'atapromise.c' |
| cargs += '-DCONFIG_ATAPROMISE=1' |
| endif |
| #if config_atavia |
| # srcs += 'atavia.c' |
| # cargs += '-DCONFIG_ATAVIA=1' |
| #endif |
| if config_buspirate_spi |
| srcs += 'buspirate_spi.c' |
| cargs += '-DCONFIG_BUSPIRATE_SPI=1' |
| need_serial = true |
| endif |
| #if config_ch341a_spi |
| # srcs += 'ch341a_spi.c' |
| # cargs += '-DCONFIG_CH341A_SPI=1' |
| #endif |
| if config_dediprog |
| srcs += 'dediprog.c' |
| cargs += '-DCONFIG_DEDIPROG=1' |
| endif |
| #if config_developerbox_spi |
| # srcs += 'developerbox_spi.c' |
| # cargs += '-DCONFIG_DEVELOPERBOX_SPI=1' |
| #endif |
| #if config_digilent_spi |
| # srcs += 'digilent_spi.c' |
| # cargs += '-DCONFIG_DIGILENT_SPI=1' |
| #endif |
| if config_drkaiser |
| srcs += 'drkaiser.c' |
| cargs += '-DCONFIG_DRKAISER=1' |
| endif |
| if config_dummy |
| srcs += 'dummyflasher.c' |
| cargs += '-DCONFIG_DUMMY=1' |
| endif |
| if config_ft2232_spi |
| srcs += 'ft2232_spi.c' |
| cargs += '-DCONFIG_FT2232_SPI=1' |
| deps += dependency('libftdi1') |
| cargs += '-DHAVE_FT232H=1' |
| endif |
| if config_gfxnvidia |
| srcs += 'gfxnvidia.c' |
| cargs += '-DCONFIG_GFXNVIDIA=1' |
| endif |
| if config_raiden |
| srcs += 'raiden_debug_spi.c' |
| cargs += '-DCONFIG_RAIDEN=1' |
| endif |
| if config_internal |
| srcs += 'board_enable.c' |
| srcs += 'cbtable.c' |
| srcs += 'chipset_enable.c' |
| srcs += 'internal.c' |
| srcs += 'processor_enable.c' |
| if target_machine.cpu_family() == 'x86' or target_machine.cpu_family() == 'x86_64' |
| srcs += 'amd_imc.c' |
| srcs += 'dmi.c' |
| srcs += 'ichspi.c' |
| srcs += 'it85spi.c' |
| srcs += 'it87spi.c' |
| srcs += 'mcp6x_spi.c' |
| srcs += 'sb600spi.c' |
| srcs += 'wbsio_spi.c' |
| endif |
| config_bitbang_spi = true |
| cargs += '-DCONFIG_INTERNAL=1' |
| if get_option('config_internal_dmi') |
| # Use internal DMI/SMBIOS decoder by default instead of relying on dmidecode. |
| cargs += '-DCONFIG_INTERNAL_DMI=1' |
| endif |
| endif |
| #if config_it8212 |
| # srcs += 'it8212.c' |
| # cargs += '-DCONFIG_IT8212=1' |
| #endif |
| if config_linux_mtd |
| srcs += 'linux_mtd.c' |
| cargs += '-DCONFIG_LINUX_MTD=1' |
| endif |
| if config_linux_spi |
| srcs += 'linux_spi.c' |
| cargs += '-DCONFIG_LINUX_SPI=1' |
| endif |
| if config_mstarddc_spi |
| srcs += 'mstarddc_spi.c' |
| cargs += '-DCONFIG_MSTARDDC_SPI=1' |
| endif |
| if config_nic3com |
| srcs += 'nic3com.c' |
| cargs += '-DCONFIG_NIC3COM=1' |
| endif |
| if config_nicintel |
| srcs += 'nicintel.c' |
| cargs += '-DCONFIG_NICINTEL=1' |
| endif |
| #if config_nicintel_eeprom |
| # srcs += 'nicintel_eeprom.c' |
| # cargs += '-DCONFIG_NICINTEL_EEPROM=1' |
| #endif |
| if config_nicintel_spi |
| srcs += 'nicintel_spi.c' |
| config_bitbang_spi = true |
| cargs += '-DCONFIG_NICINTEL_SPI=1' |
| endif |
| if config_nicnatsemi |
| srcs += 'nicnatsemi.c' |
| cargs += '-DCONFIG_NICNATSEMI=1' |
| endif |
| if config_nicrealtek |
| srcs += 'nicrealtek.c' |
| cargs += '-DCONFIG_NICREALTEK=1' |
| endif |
| if config_ogp_spi |
| config_bitbang_spi = true |
| srcs += 'ogp_spi.c' |
| cargs += '-DCONFIG_OGP_SPI=1' |
| endif |
| #if config_pickit2_spi |
| # srcs += 'pickit2_spi.c' |
| # cargs += '-DCONFIG_PICKIT2_SPI=1' |
| #endif |
| #if config_pony_spi |
| # srcs += 'pony_spi.c' |
| # need_serial = true |
| # config_bitbang_spi = true |
| # cargs += '-DCONFIG_PONY_SPI=1' |
| #endif |
| if config_rayer_spi |
| srcs += 'rayer_spi.c' |
| config_bitbang_spi = true |
| need_raw_access = true |
| cargs += '-DCONFIG_RAYER_SPI=1' |
| endif |
| if config_satamv |
| srcs += 'satamv.c' |
| cargs += '-DCONFIG_SATAMV=1' |
| endif |
| if config_satasii |
| srcs += 'satasii.c' |
| cargs += '-DCONFIG_SATASII=1' |
| endif |
| if config_serprog |
| srcs += 'serprog.c' |
| cargs += '-DCONFIG_SERPROG=1' |
| need_serial = true |
| endif |
| #if config_usbblaster_spi |
| # srcs += 'usbblaster_spi.c' |
| # cargs += '-DCONFIG_USBBLASTER_SPI=1' |
| #endif |
| #if config_stlinkv3_spi |
| # srcs += 'stlinkv3_spi.c' |
| # cargs += '-DCONFIG_STLINKV3_SPI=1' |
| #endif |
| if config_lspcon_i2c_spi |
| srcs += 'lspcon_i2c_spi.c' |
| cargs += '-DCONFIG_LSPCON_I2C_SPI=1' |
| endif |
| if config_realtek_mst_i2c_spi |
| srcs += 'realtek_mst_i2c_spi.c' |
| cargs += '-DCONFIG_REALTEK_MST_I2C_SPI=1' |
| endif |
| |
| # bitbanging SPI infrastructure |
| if config_bitbang_spi |
| srcs += 'bitbang_spi.c' |
| cargs += '-DCONFIG_BITBANG_SPI=1' |
| endif |
| |
| if host_machine.system() == 'linux' |
| srcs += 'i2c_helper_linux.c' |
| cargs += '-DCONFIG_I2C_SUPPORT=1' |
| endif |
| |
| # raw memory, MSR or PCI port I/O access |
| if need_raw_access |
| srcs += 'hwaccess.c' |
| srcs += 'physmap.c' |
| cargs += '-DNEED_RAW_ACCESS=1' |
| endif |
| |
| # raw serial IO |
| if need_serial |
| srcs += 'custom_baud.c' |
| srcs += 'serial.c' |
| endif |
| |
| prefix = get_option('prefix') |
| sbindir = join_paths(prefix, get_option('sbindir')) |
| libdir = join_paths(prefix, get_option('libdir')) |
| |
| install_headers([ |
| 'libflashrom.h', |
| ], |
| ) |
| |
| ### CrOS Tree |
| srcs += 'ene_lpc.c' |
| srcs += 'power.c' |
| srcs += 'search.c' |
| srcs += 'file.c' |
| srcs += 'm29f400bt.c' |
| srcs += 'mec1308.c' |
| srcs += 'wpce775x.c' |
| srcs += 'cros_ec.c' |
| srcs += 'cros_ec_dev.c' |
| srcs += 's25f.c' |
| srcs += 'spi4ba.c' |
| srcs += 'stm50flw0x0x.c' |
| srcs += 'action_descriptor.c' |
| srcs += 'flashchips_hwseq.c' |
| srcs += 'writeprotect.c' |
| ### |
| |
| # core modules needed by both the library and the CLI |
| srcs += '82802ab.c' |
| srcs += 'at45db.c' |
| srcs += 'edi.c' |
| #srcs += 'en29lv640b.c' |
| srcs += 'flashchips.c' |
| srcs += 'flashrom.c' |
| srcs += 'fmap.c' |
| srcs += 'helpers.c' |
| srcs += 'ich_descriptors.c' |
| srcs += 'jedec.c' |
| srcs += 'layout.c' |
| #srcs += 'libflashrom.c' |
| srcs += 'opaque.c' |
| srcs += 'print.c' |
| srcs += 'programmer.c' |
| #srcs += 'sfdp.c' |
| srcs += 'spi25.c' |
| srcs += 'spi25_statusreg.c' |
| #srcs += 'spi95.c' |
| srcs += 'spi.c' |
| srcs += 'sst28sf040.c' |
| srcs += 'sst49lfxxxc.c' |
| srcs += 'sst_fwhub.c' |
| #srcs += 'stm50.c' |
| srcs += 'udelay.c' |
| srcs += 'w29ee011.c' |
| srcs += 'w39.c' |
| |
| mapfile = 'libflashrom.map' |
| vflag = '-Wl,--version-script,@0@/@1@'.format(meson.current_source_dir(), mapfile) |
| #flashrom = shared_library( |
| # 'flashrom', |
| # sources : [ |
| # srcs, |
| # ], |
| # soversion : lt_current, |
| # version : lt_version, |
| # dependencies : [ |
| # deps, |
| # ], |
| # c_args : [ |
| # cargs, |
| # ], |
| # install : true, |
| # link_args : vflag, |
| # link_depends : mapfile, |
| #) |
| |
| version = meson.project_version() |
| #strip leading characters |
| if version.startswith('v') |
| version = version.split('v')[1] |
| endif |
| if version.startswith('p') |
| version = version.split('p')[1] |
| endif |
| |
| #pkgg = import('pkgconfig') |
| #pkgg.generate( |
| # libraries : flashrom, |
| # version : version, |
| # name : 'flashrom', |
| # filebase : 'flashrom', |
| # description : 'library to interact with flashrom', |
| #) |
| # |
| #flashrom_dep = declare_dependency( |
| # link_with : flashrom, |
| # include_directories : include_directories('.'), |
| # dependencies : deps |
| #) |
| |
| # we can't just link_with libflashrom as we require all the internal symbols... |
| executable( |
| 'flashrom', |
| sources : [ |
| srcs, |
| 'cli_classic.c', |
| 'cli_common.c', |
| 'cli_output.c', |
| 'flashrom.c', |
| ], |
| dependencies : [ |
| deps, |
| ], |
| c_args : [ |
| cargs, |
| '-DSTANDALONE', |
| '-DCONFIG_DEFAULT_PROGRAMMER=PROGRAMMER_INVALID', |
| '-DCONFIG_DEFAULT_PROGRAMMER_ARGS=""', |
| ], |
| install : true, |
| install_dir : sbindir, |
| ) |
| |
| #subdir('util') |
