| # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, | |
| # 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011 | |
| # Free Software Foundation, Inc. | |
| # | |
| # This file is free software; you can redistribute it and/or modify it | |
| # under the terms of the GNU General Public License as published by | |
| # the Free Software Foundation; either version 3 of the License, or | |
| # (at your option) any later version. | |
| # | |
| # This program is distributed in the hope that it will be useful, but | |
| # WITHOUT ANY WARRANTY; without even the implied warranty of | |
| # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU | |
| # General Public License for more details. | |
| # | |
| # You should have received a copy of the GNU General Public License | |
| # along with this program; see the file COPYING3. If not see | |
| # <http://www.gnu.org/licenses/>. | |
| ############################################################################## | |
| ### WARNING: this file contains embedded tabs. Do not run untabify on this file. | |
| m4_include(config/acx.m4) | |
| m4_include(config/override.m4) | |
| m4_include(config/proginstall.m4) | |
| m4_include(config/elf.m4) | |
| m4_include([libtool.m4]) | |
| m4_include([ltoptions.m4]) | |
| m4_include([ltsugar.m4]) | |
| m4_include([ltversion.m4]) | |
| m4_include([lt~obsolete.m4]) | |
| m4_include([config/cloog.m4]) | |
| AC_INIT(move-if-change) | |
| AC_PREREQ(2.64) | |
| AC_DISABLE_OPTION_CHECKING | |
| progname=$0 | |
| # if PWD already has a value, it is probably wrong. | |
| if test -n "$PWD" ; then PWD=`${PWDCMD-pwd}`; fi | |
| # Export original configure arguments for use by sub-configures. | |
| # Quote arguments with shell meta charatcers. | |
| TOPLEVEL_CONFIGURE_ARGUMENTS= | |
| set -- "$progname" "$@" | |
| for ac_arg | |
| do | |
| case "$ac_arg" in | |
| *" "*|*" "*|*[[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\']]*) | |
| ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` | |
| # if the argument is of the form -foo=baz, quote the baz part only | |
| ac_arg=`echo "'$ac_arg'" | sed "s/^'\([[-a-zA-Z0-9]]*=\)/\\1'/"` ;; | |
| *) ;; | |
| esac | |
| # Add the quoted argument to the list. | |
| TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS $ac_arg" | |
| done | |
| if test "$silent" = yes; then | |
| TOPLEVEL_CONFIGURE_ARGUMENTS="$TOPLEVEL_CONFIGURE_ARGUMENTS --silent" | |
| fi | |
| # Remove the initial space we just introduced and, as these will be | |
| # expanded by make, quote '$'. | |
| TOPLEVEL_CONFIGURE_ARGUMENTS=`echo "x$TOPLEVEL_CONFIGURE_ARGUMENTS" | sed -e 's/^x *//' -e 's,\\$,$$,g'` | |
| AC_SUBST(TOPLEVEL_CONFIGURE_ARGUMENTS) | |
| # Find the build, host, and target systems. | |
| ACX_NONCANONICAL_BUILD | |
| ACX_NONCANONICAL_HOST | |
| ACX_NONCANONICAL_TARGET | |
| dnl Autoconf 2.5x and later will set a default program prefix if | |
| dnl --target was used, even if it was the same as --host. Disable | |
| dnl that behavior. This must be done before AC_CANONICAL_SYSTEM | |
| dnl to take effect. | |
| test "$host_noncanonical" = "$target_noncanonical" && | |
| test "$program_prefix$program_suffix$program_transform_name" = \ | |
| NONENONEs,x,x, && | |
| program_transform_name=s,y,y, | |
| AC_CANONICAL_SYSTEM | |
| AC_ARG_PROGRAM | |
| m4_pattern_allow([^AS_FOR_TARGET$])dnl | |
| m4_pattern_allow([^AS_FOR_BUILD$])dnl | |
| # Get 'install' or 'install-sh' and its variants. | |
| AC_PROG_INSTALL | |
| ACX_PROG_LN | |
| AC_PROG_LN_S | |
| AC_PROG_SED | |
| AC_PROG_AWK | |
| srcpwd=`cd ${srcdir} ; ${PWDCMD-pwd}` | |
| # We pass INSTALL explicitly to sub-makes. Make sure that it is not | |
| # a relative path. | |
| if test "$INSTALL" = "${srcdir}/install-sh -c"; then | |
| INSTALL="${srcpwd}/install-sh -c" | |
| fi | |
| # Set srcdir to "." if that's what it is. | |
| # This is important for multilib support. | |
| pwd=`${PWDCMD-pwd}` | |
| if test "${pwd}" = "${srcpwd}" ; then | |
| srcdir=. | |
| fi | |
| topsrcdir=$srcpwd | |
| extra_host_args= | |
| ### To add a new directory to the tree, first choose whether it is a target | |
| ### or a host dependent tool. Then put it into the appropriate list | |
| ### (library or tools, host or target), doing a dependency sort. | |
| # Subdirs will be configured in the order listed in build_configdirs, | |
| # configdirs, or target_configdirs; see the serialization section below. | |
| # Dependency sorting is only needed when *configuration* must be done in | |
| # a particular order. In all cases a dependency should be specified in | |
| # the Makefile, whether or not it's implicitly specified here. | |
| # Double entries in build_configdirs, configdirs, or target_configdirs may | |
| # cause circular dependencies and break everything horribly. | |
| # these library is used by various programs built for the build | |
| # environment | |
| # | |
| build_libs="build-libiberty" | |
| # these tools are built for the build environment | |
| build_tools="build-texinfo build-flex build-bison build-m4 build-fixincludes" | |
| # these libraries are used by various programs built for the host environment | |
| # | |
| host_libs="intl libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber gmp mpfr mpc ppl cloog libelf libiconv" | |
| # these tools are built for the host environment | |
| # Note, the powerpc-eabi build depends on sim occurring before gdb in order to | |
| # know that we are building the simulator. | |
| # binutils, gas and ld appear in that order because it makes sense to run | |
| # "make check" in that particular order. | |
| # If --enable-gold is used, "gold" may replace "ld". | |
| host_tools="texinfo flex bison binutils gas ld fixincludes gcc cgen sid sim gdb gprof etc expect dejagnu m4 utils guile fastjar gnattools" | |
| # libgcj represents the runtime libraries only used by gcj. | |
| libgcj="target-libffi \ | |
| target-zlib \ | |
| target-libjava" | |
| # these libraries are built for the target environment, and are built after | |
| # the host libraries and the host tools (which may be a cross compiler) | |
| # | |
| target_libraries="target-libgcc \ | |
| target-libiberty \ | |
| target-libgloss \ | |
| target-newlib \ | |
| target-libgomp \ | |
| target-libstdc++-v3 \ | |
| target-libmudflap \ | |
| target-libssp \ | |
| target-libquadmath \ | |
| target-libgfortran \ | |
| target-boehm-gc \ | |
| ${libgcj} \ | |
| target-libobjc \ | |
| target-libada \ | |
| target-libgo" | |
| # these tools are built using the target libraries, and are intended to | |
| # run only in the target environment | |
| # | |
| # note: any program that *uses* libraries that are in the "target_libraries" | |
| # list belongs in this list. | |
| # | |
| target_tools="target-rda" | |
| ################################################################################ | |
| ## All tools belong in one of the four categories, and are assigned above | |
| ## We assign ${configdirs} this way to remove all embedded newlines. This | |
| ## is important because configure will choke if they ever get through. | |
| ## ${configdirs} is directories we build using the host tools. | |
| ## ${target_configdirs} is directories we build using the target tools. | |
| configdirs=`echo ${host_libs} ${host_tools}` | |
| target_configdirs=`echo ${target_libraries} ${target_tools}` | |
| build_configdirs=`echo ${build_libs} ${build_tools}` | |
| m4_divert_text([PARSE_ARGS], | |
| [case $srcdir in | |
| *" "*) | |
| m4_pushdef([AS_MESSAGE_LOG_FD], [])dnl | |
| AC_MSG_ERROR([path to source, $srcdir, contains spaces]) | |
| m4_popdef([AS_MESSAGE_LOG_FD])dnl | |
| ;; | |
| esac | |
| ac_subdirs_all=`cd $srcdir && echo */configure | sed 's,/configure,,g'` | |
| ]) | |
| ################################################################################ | |
| srcname="gnu development package" | |
| # This gets set non-empty for some net releases of packages. | |
| appdirs="" | |
| # Define is_cross_compiler to save on calls to 'test'. | |
| is_cross_compiler= | |
| if test x"${host}" = x"${target}" ; then | |
| is_cross_compiler=no | |
| else | |
| is_cross_compiler=yes | |
| fi | |
| # Find the build and target subdir names. | |
| GCC_TOPLEV_SUBDIRS | |
| # Be sure to cover against remnants of an in-tree build. | |
| if test $srcdir != . && test -d $srcdir/host-${host_noncanonical}; then | |
| AC_MSG_ERROR([building out of tree but $srcdir contains host-${host_noncanonical}. | |
| Use a pristine source tree when building in a separate tree]) | |
| fi | |
| # Skipdirs are removed silently. | |
| skipdirs= | |
| # Noconfigdirs are removed loudly. | |
| noconfigdirs="" | |
| use_gnu_ld= | |
| # Make sure we don't let GNU ld be added if we didn't want it. | |
| if test x$with_gnu_ld = xno ; then | |
| use_gnu_ld=no | |
| noconfigdirs="$noconfigdirs ld gold" | |
| fi | |
| use_gnu_as= | |
| # Make sure we don't let GNU as be added if we didn't want it. | |
| if test x$with_gnu_as = xno ; then | |
| use_gnu_as=no | |
| noconfigdirs="$noconfigdirs gas" | |
| fi | |
| use_included_zlib= | |
| # Make sure we don't let ZLIB be added if we didn't want it. | |
| if test x$with_system_zlib = xyes ; then | |
| use_included_zlib=no | |
| noconfigdirs="$noconfigdirs zlib" | |
| fi | |
| # some tools are so dependent upon X11 that if we're not building with X, | |
| # it's not even worth trying to configure, much less build, that tool. | |
| case ${with_x} in | |
| yes | "") ;; # the default value for this tree is that X11 is available | |
| no) | |
| skipdirs="${skipdirs} tk itcl libgui" | |
| # We won't be able to build gdbtk without X. | |
| enable_gdbtk=no | |
| ;; | |
| *) echo "*** bad value \"${with_x}\" for -with-x flag; ignored" 1>&2 ;; | |
| esac | |
| # Some are only suitable for cross toolchains. | |
| # Remove these if host=target. | |
| cross_only="target-libgloss target-newlib target-opcodes" | |
| case $is_cross_compiler in | |
| no) skipdirs="${skipdirs} ${cross_only}" ;; | |
| esac | |
| # If both --with-headers and --with-libs are specified, default to | |
| # --without-newlib. | |
| if test x"${with_headers}" != x && test x"${with_headers}" != xno \ | |
| && test x"${with_libs}" != x && test x"${with_libs}" != xno ; then | |
| if test x"${with_newlib}" = x ; then | |
| with_newlib=no | |
| fi | |
| fi | |
| # Recognize --with-newlib/--without-newlib. | |
| case ${with_newlib} in | |
| no) skipdirs="${skipdirs} target-newlib" ;; | |
| yes) skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` ;; | |
| esac | |
| # Handle --enable-gold, --enable-ld. | |
| # --disable-gold [--enable-ld] | |
| # Build only ld. Default option. | |
| # --enable-gold [--enable-ld] | |
| # Build both gold and ld. Install gold as "ld.gold", install ld | |
| # as "ld.bfd" and "ld". | |
| # --enable-gold=default [--enable-ld] | |
| # Build both gold and ld. Install gold as "ld.gold" and "ld", | |
| # install ld as "ld.bfd". | |
| # --enable-gold[=default] --disable-ld | |
| # Build only gold, which is then installed as both "ld.gold" and "ld". | |
| # --enable-gold --enable-ld=default | |
| # Build both gold (installed as "ld.gold") and ld (installed as "ld" | |
| # and ld.bfd). | |
| # In other words, ld is default | |
| # --enable-gold=default --enable-ld=default | |
| # Error. | |
| default_ld= | |
| AC_ARG_ENABLE(gold, | |
| [AS_HELP_STRING([[--enable-gold[=ARG]]], | |
| [build gold @<:@ARG={default,yes,no}@:>@])], | |
| ENABLE_GOLD=$enableval, | |
| ENABLE_GOLD=no) | |
| case "${ENABLE_GOLD}" in | |
| yes|default) | |
| # Check for ELF target. | |
| is_elf=no | |
| case "${target}" in | |
| *-*-elf* | *-*-sysv4* | *-*-unixware* | *-*-eabi* | hppa*64*-*-hpux* \ | |
| | *-*-linux* | frv-*-uclinux* | *-*-irix5* | *-*-irix6* \ | |
| | *-*-netbsd* | *-*-openbsd* | *-*-freebsd* | *-*-dragonfly* \ | |
| | *-*-solaris2* | *-*-nto*) | |
| case "${target}" in | |
| *-*-linux*aout* | *-*-linux*oldld*) | |
| ;; | |
| *) | |
| is_elf=yes | |
| ;; | |
| esac | |
| esac | |
| if test "$is_elf" = "yes"; then | |
| # Check for target supported by gold. | |
| case "${target}" in | |
| i?86-*-* | x86_64-*-* | sparc*-*-* | powerpc*-*-* | arm*-*-*) | |
| configdirs="$configdirs gold" | |
| if test x${ENABLE_GOLD} = xdefault; then | |
| default_ld=gold | |
| fi | |
| ENABLE_GOLD=yes | |
| ;; | |
| esac | |
| fi | |
| ;; | |
| no) | |
| ;; | |
| *) | |
| AC_MSG_ERROR([invalid --enable-gold argument]) | |
| ;; | |
| esac | |
| AC_ARG_ENABLE(ld, | |
| [AS_HELP_STRING([[--enable-ld[=ARG]]], | |
| [build ld @<:@ARG={default,yes,no}@:>@])], | |
| ENABLE_LD=$enableval, | |
| ENABLE_LD=yes) | |
| case "${ENABLE_LD}" in | |
| default) | |
| if test x${default_ld} != x; then | |
| AC_MSG_ERROR([either gold or ld can be the default ld]) | |
| fi | |
| ;; | |
| yes) | |
| ;; | |
| no) | |
| if test x${ENABLE_GOLD} != xyes; then | |
| AC_MSG_WARN([neither ld nor gold are enabled]) | |
| fi | |
| configdirs=`echo " ${configdirs} " | sed -e 's/ ld / /'` | |
| ;; | |
| *) | |
| AC_MSG_ERROR([invalid --enable-ld argument]) | |
| ;; | |
| esac | |
| # Configure extra directories which are host specific | |
| case "${host}" in | |
| *-cygwin*) | |
| configdirs="$configdirs libtermcap" ;; | |
| esac | |
| # A target can indicate whether a language isn't supported for some reason. | |
| # Only spaces may be used in this macro; not newlines or tabs. | |
| unsupported_languages= | |
| # Remove more programs from consideration, based on the host or | |
| # target this usually means that a port of the program doesn't | |
| # exist yet. | |
| case "${host}" in | |
| i[[3456789]]86-*-msdosdjgpp*) | |
| noconfigdirs="$noconfigdirs tcl tk itcl" | |
| ;; | |
| esac | |
| AC_ARG_ENABLE(libquadmath, | |
| AS_HELP_STRING([--disable-libquadmath], | |
| [do not build libquadmath directory]), | |
| ENABLE_LIBQUADMATH=$enableval, | |
| ENABLE_LIBQUADMATH=yes) | |
| if test "${ENABLE_LIBQUADMATH}" = "no" ; then | |
| noconfigdirs="$noconfigdirs target-libquadmath" | |
| fi | |
| AC_ARG_ENABLE(libquadmath-support, | |
| AS_HELP_STRING([--disable-libquadmath-support], | |
| [disable libquadmath support for Fortran]), | |
| ENABLE_LIBQUADMATH_SUPPORT=$enableval, | |
| ENABLE_LIBQUADMATH_SUPPORT=yes) | |
| enable_libquadmath_support= | |
| if test "${ENABLE_LIBQUADMATH_SUPPORT}" = "no" ; then | |
| enable_libquadmath_support=no | |
| fi | |
| AC_ARG_ENABLE(libada, | |
| [AS_HELP_STRING([--enable-libada], [build libada directory])], | |
| ENABLE_LIBADA=$enableval, | |
| ENABLE_LIBADA=yes) | |
| if test "${ENABLE_LIBADA}" != "yes" ; then | |
| noconfigdirs="$noconfigdirs gnattools" | |
| fi | |
| AC_ARG_ENABLE(libssp, | |
| [AS_HELP_STRING([--enable-libssp], [build libssp directory])], | |
| ENABLE_LIBSSP=$enableval, | |
| ENABLE_LIBSSP=yes) | |
| # Save it here so that, even in case of --enable-libgcj, if the Java | |
| # front-end isn't enabled, we still get libgcj disabled. | |
| libgcj_saved=$libgcj | |
| case $enable_libgcj in | |
| yes) | |
| # If we reset it here, it won't get added to noconfigdirs in the | |
| # target-specific build rules, so it will be forcibly enabled | |
| # (unless the Java language itself isn't enabled). | |
| libgcj= | |
| ;; | |
| no) | |
| # Make sure we get it printed in the list of not supported target libs. | |
| # Don't disable libffi, though, other languages use it. | |
| noconfigdirs="$noconfigdirs `echo ${libgcj} | sed -e 's/target-libffi//'`" | |
| # Clear libgcj_saved so that even if java is enabled libffi won't be | |
| # built. | |
| libgcj_saved= | |
| ;; | |
| esac | |
| # Disable libmudflap on some systems. | |
| if test x$enable_libmudflap = x ; then | |
| case "${target}" in | |
| *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | bfin*-*-uclinux* | *-*-kopensolaris*-gnu) | |
| # Enable libmudflap by default in GNU and friends. | |
| ;; | |
| *-*-freebsd*) | |
| # Enable libmudflap by default in FreeBSD. | |
| ;; | |
| *) | |
| # Disable it by default everywhere else. | |
| noconfigdirs="$noconfigdirs target-libmudflap" | |
| ;; | |
| esac | |
| fi | |
| # Disable libgomp on non POSIX hosted systems. | |
| if test x$enable_libgomp = x ; then | |
| # Enable libgomp by default on hosted POSIX systems. | |
| case "${target}" in | |
| *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu) | |
| ;; | |
| *-*-netbsd* | *-*-freebsd* | *-*-openbsd* | *-*-dragonfly*) | |
| ;; | |
| *-*-solaris2* | *-*-irix6* | *-*-osf* | *-*-hpux11*) | |
| ;; | |
| *-*-darwin* | *-*-aix*) | |
| ;; | |
| *) | |
| noconfigdirs="$noconfigdirs target-libgomp" | |
| ;; | |
| esac | |
| fi | |
| # Disable libssp for some systems. | |
| case "${target}" in | |
| avr-*-*) | |
| # No hosted I/O support. | |
| noconfigdirs="$noconfigdirs target-libssp" | |
| ;; | |
| powerpc-*-aix* | rs6000-*-aix*) | |
| noconfigdirs="$noconfigdirs target-libssp" | |
| ;; | |
| esac | |
| # Disable target libiberty for some systems. | |
| case "${target}" in | |
| *-*-kaos*) | |
| # Remove unsupported stuff on all kaOS configurations. | |
| skipdirs="target-libiberty" | |
| ;; | |
| *-*-netbsd*) | |
| # Skip some stuff on all NetBSD configurations. | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| *-*-netware*) | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| *-*-rtems*) | |
| skipdirs="${skipdirs} target-libiberty" | |
| ;; | |
| *-*-tpf*) | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| *-*-vxworks*) | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| sh*-*-pe|mips*-*-pe|*arm-wince-pe) | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| arm*-*-symbianelf*) | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| avr-*-*) | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*) | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| picochip-*-*) | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| mips*-sde-elf*) | |
| skipdirs="$skipdirs target-libiberty" | |
| ;; | |
| ip2k-*-*) | |
| noconfigdirs="$noconfigdirs target-libiberty" | |
| ;; | |
| esac | |
| # Disable libstdc++-v3 for some systems. | |
| case "${target}" in | |
| *-*-vxworks*) | |
| # VxWorks uses the Dinkumware C++ library. | |
| noconfigdirs="$noconfigdirs target-libstdc++-v3" | |
| ;; | |
| arm*-wince-pe*) | |
| # the C++ libraries don't build on top of CE's C libraries | |
| noconfigdirs="$noconfigdirs target-libstdc++-v3" | |
| ;; | |
| avr-*-*) | |
| noconfigdirs="$noconfigdirs target-libstdc++-v3" | |
| ;; | |
| esac | |
| # Disable Fortran for some systems. | |
| case "${target}" in | |
| mmix-*-*) | |
| # See <http://gcc.gnu.org/ml/gcc-patches/2004-11/msg00572.html>. | |
| unsupported_languages="$unsupported_languages fortran" | |
| ;; | |
| esac | |
| # Disable Java if libffi is not supported. | |
| case "${target}" in | |
| alpha*-*-*) | |
| ;; | |
| arm*-*-*) | |
| ;; | |
| cris-*-*) | |
| ;; | |
| frv-*-*) | |
| ;; | |
| hppa*-*-linux*) | |
| ;; | |
| hppa*-*-hpux*) | |
| ;; | |
| i?86-*-*) | |
| ;; | |
| ia64*-*-*) | |
| ;; | |
| m32r*-*-*) | |
| ;; | |
| m68k-*-*) | |
| ;; | |
| mips-sgi-irix6.* | mips*-*-rtems*) | |
| ;; | |
| mips*-*-linux*) | |
| ;; | |
| powerpc*-*-linux*) | |
| ;; | |
| powerpc-*-darwin*) | |
| ;; | |
| powerpc-*-aix* | rs6000-*-aix*) | |
| ;; | |
| powerpc-*-freebsd*) | |
| ;; | |
| powerpc64-*-freebsd*) | |
| ;; | |
| powerpc*-*-rtems*) | |
| ;; | |
| s390-*-* | s390x-*-*) | |
| ;; | |
| sh-*-* | sh[[34]]*-*-*) | |
| ;; | |
| sh64-*-* | sh5*-*-*) | |
| ;; | |
| sparc*-*-*) | |
| ;; | |
| x86_64-*-*) | |
| ;; | |
| *-*-*) | |
| unsupported_languages="$unsupported_languages java" | |
| ;; | |
| esac | |
| # Disable Java, libgcj or related libraries for some systems. | |
| case "${target}" in | |
| powerpc-*-darwin*) | |
| ;; | |
| i[[3456789]]86-*-darwin*) | |
| ;; | |
| x86_64-*-darwin[[912]]*) | |
| ;; | |
| *-*-darwin*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| *-*-netware*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| *-*-rtems*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| *-*-tpf*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| *-*-uclinux*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| *-*-vxworks*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| alpha*-*-*vms*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| arm-wince-pe) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| arm*-*-symbianelf*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| bfin-*-*) | |
| noconfigdirs="$noconfigdirs target-boehm-gc" | |
| ;; | |
| cris-*-* | crisv32-*-*) | |
| unsupported_languages="$unsupported_languages java" | |
| case "${target}" in | |
| *-*-linux*) | |
| ;; | |
| *) # See PR46792 regarding target-libffi. | |
| noconfigdirs="$noconfigdirs target-libffi target-boehm-gc";; | |
| esac | |
| ;; | |
| hppa*64*-*-linux*) | |
| # In this case, it's because the hppa64-linux target is for | |
| # the kernel only at this point and has no libc, and thus no | |
| # headers, crt*.o, etc., all of which are needed by these. | |
| unsupported_languages="$unsupported_languages java" | |
| ;; | |
| hppa*64*-*-hpux*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| hppa*-hp-hpux11*) | |
| ;; | |
| hppa*-*-hpux*) | |
| # According to Alexandre Oliva <aoliva@redhat.com>, libjava won't | |
| # build on HP-UX 10.20. | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| ia64*-*-*vms*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| i[[3456789]]86-w64-mingw*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| i[[3456789]]86-*-mingw*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| x86_64-*-mingw*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| mmix-*-*) | |
| noconfigdirs="$noconfigdirs target-libffi target-boehm-gc" | |
| ;; | |
| powerpc-*-aix*) | |
| # copied from rs6000-*-* entry | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| rs6000-*-aix*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| mips*-*-irix6*) | |
| # Linking libjava exceeds command-line length limits on at least | |
| # IRIX 6.2, but not on IRIX 6.5. | |
| # Also, boehm-gc won't build on IRIX 6.5, according to Jeffrey Oldham | |
| # <oldham@codesourcery.com> | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| *-*-lynxos*) | |
| noconfigdirs="$noconfigdirs ${libgcj}" | |
| ;; | |
| esac | |
| # Default libgloss CPU subdirectory. | |
| libgloss_dir="$target_cpu" | |
| case "${target}" in | |
| sh*-*-pe|mips*-*-pe|*arm-wince-pe) | |
| libgloss_dir=wince | |
| ;; | |
| arm*-*-*) | |
| libgloss_dir=arm | |
| ;; | |
| cris-*-* | crisv32-*-*) | |
| libgloss_dir=cris | |
| ;; | |
| hppa*-*-*) | |
| libgloss_dir=pa | |
| ;; | |
| i[[3456789]]86-*-*) | |
| libgloss_dir=i386 | |
| ;; | |
| m68hc11-*-*|m6811-*-*|m68hc12-*-*|m6812-*-*) | |
| libgloss_dir=m68hc11 | |
| ;; | |
| m68*-*-* | fido-*-*) | |
| libgloss_dir=m68k | |
| ;; | |
| mips*-*-*) | |
| libgloss_dir=mips | |
| ;; | |
| powerpc*-*-*) | |
| libgloss_dir=rs6000 | |
| ;; | |
| sparc*-*-*) | |
| libgloss_dir=sparc | |
| ;; | |
| esac | |
| # Disable newlib and libgloss for various target OSes. | |
| case "${target}" in | |
| alpha*-dec-osf*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| i[[3456789]]86-*-linux*) | |
| # This section makes it possible to build newlib natively on linux. | |
| # If we are using a cross compiler then don't configure newlib. | |
| if test x${is_cross_compiler} != xno ; then | |
| noconfigdirs="$noconfigdirs target-newlib" | |
| fi | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| # If we are not using a cross compiler, do configure newlib. | |
| # Note however, that newlib will only be configured in this situation | |
| # if the --with-newlib option has been given, because otherwise | |
| # 'target-newlib' will appear in skipdirs. | |
| ;; | |
| i[[3456789]]86-*-rdos*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| sh*-*-pe|mips*-*-pe|arm-wince-pe) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| sparc-*-sunos4*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-aix*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-beos*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-chorusos) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-dragonfly*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-freebsd*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-lynxos*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-mingw*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-netbsd*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-netware*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-tpf*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-uclinux*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| *-*-vxworks*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| esac | |
| case "${target}" in | |
| *-*-chorusos) | |
| ;; | |
| powerpc-*-darwin*) | |
| noconfigdirs="$noconfigdirs ld gas gdb gprof" | |
| noconfigdirs="$noconfigdirs sim target-rda" | |
| ;; | |
| i[[3456789]]86-*-darwin*) | |
| noconfigdirs="$noconfigdirs ld gprof" | |
| noconfigdirs="$noconfigdirs sim target-rda" | |
| ;; | |
| x86_64-*-darwin[[912]]*) | |
| noconfigdirs="$noconfigdirs ld gas gprof" | |
| noconfigdirs="$noconfigdirs sim target-rda" | |
| ;; | |
| *-*-darwin*) | |
| noconfigdirs="$noconfigdirs ld gas gdb gprof" | |
| noconfigdirs="$noconfigdirs sim target-rda" | |
| ;; | |
| *-*-dragonfly*) | |
| ;; | |
| *-*-freebsd*) | |
| if test "x$with_gmp" = x && test "x$with_gmp_dir" = x \ | |
| && test -f /usr/local/include/gmp.h; then | |
| with_gmp=/usr/local | |
| fi | |
| ;; | |
| *-*-kaos*) | |
| # Remove unsupported stuff on all kaOS configurations. | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| *-*-netbsd*) | |
| ;; | |
| *-*-netware*) | |
| ;; | |
| *-*-rtems*) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| # The tpf target doesn't support gdb yet. | |
| *-*-tpf*) | |
| noconfigdirs="$noconfigdirs gdb tcl tk libgui itcl" | |
| ;; | |
| *-*-uclinux*) | |
| noconfigdirs="$noconfigdirs target-rda" | |
| ;; | |
| *-*-vxworks*) | |
| ;; | |
| alpha*-dec-osf*) | |
| # ld works, but does not support shared libraries. | |
| # gas doesn't generate exception information. | |
| noconfigdirs="$noconfigdirs gas ld" | |
| ;; | |
| alpha*-*-*vms*) | |
| noconfigdirs="$noconfigdirs gdb target-newlib target-libgloss" | |
| ;; | |
| alpha*-*-*) | |
| # newlib is not 64 bit ready | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| sh*-*-pe|mips*-*-pe|*arm-wince-pe) | |
| noconfigdirs="$noconfigdirs tcl tk itcl libgui sim" | |
| ;; | |
| arc-*-*) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| arm-*-pe*) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| arm-*-riscix*) | |
| noconfigdirs="$noconfigdirs ld target-libgloss" | |
| ;; | |
| c4x-*-* | tic4x-*-*) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| tic54x-*-*) | |
| noconfigdirs="$noconfigdirs target-libgloss gdb" | |
| ;; | |
| cr16-*-*) | |
| noconfigdirs="$noconfigdirs gdb" | |
| ;; | |
| d10v-*-*) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| d30v-*-*) | |
| noconfigdirs="$noconfigdirs gdb" | |
| ;; | |
| fr30-*-elf*) | |
| noconfigdirs="$noconfigdirs gdb" | |
| ;; | |
| moxie-*-*) | |
| noconfigdirs="$noconfigdirs gprof" | |
| ;; | |
| h8300*-*-*) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| h8500-*-*) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| hppa1.1-*-osf* | hppa1.1-*-bsd* ) | |
| ;; | |
| hppa*64*-*-linux*) | |
| ;; | |
| hppa*-*-linux*) | |
| ;; | |
| hppa*-*-*elf* | \ | |
| hppa*-*-lites* | \ | |
| hppa*-*-openbsd* | \ | |
| hppa*64*-*-*) | |
| ;; | |
| hppa*-hp-hpux11*) | |
| noconfigdirs="$noconfigdirs ld" | |
| ;; | |
| hppa*-*-pro*) | |
| ;; | |
| hppa*-*-*) | |
| noconfigdirs="$noconfigdirs ld" | |
| ;; | |
| i960-*-*) | |
| noconfigdirs="$noconfigdirs gdb" | |
| ;; | |
| ia64*-*-elf*) | |
| # No gdb support yet. | |
| noconfigdirs="$noconfigdirs readline libgui itcl gdb" | |
| ;; | |
| ia64*-**-hpux*) | |
| # No ld support yet. | |
| noconfigdirs="$noconfigdirs libgui itcl ld" | |
| ;; | |
| ia64*-*-*vms*) | |
| # No gdb or ld support yet. | |
| noconfigdirs="$noconfigdirs readline libgui itcl gdb ld" | |
| ;; | |
| i[[3456789]]86-w64-mingw*) | |
| ;; | |
| i[[3456789]]86-*-mingw*) | |
| target_configdirs="$target_configdirs target-winsup" | |
| ;; | |
| *-*-cygwin*) | |
| target_configdirs="$target_configdirs target-libtermcap target-winsup" | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| # always build newlib if winsup directory is present. | |
| if test -d "$srcdir/winsup/cygwin"; then | |
| skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` | |
| elif test -d "$srcdir/newlib"; then | |
| echo "Warning: winsup/cygwin is missing so newlib can't be built." | |
| fi | |
| ;; | |
| i[[3456789]]86-*-pe) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| i[[3456789]]86-*-sco3.2v5*) | |
| # The linker does not yet know about weak symbols in COFF, | |
| # and is not configured to handle mixed ELF and COFF. | |
| noconfigdirs="$noconfigdirs ld target-libgloss" | |
| ;; | |
| i[[3456789]]86-*-sco*) | |
| noconfigdirs="$noconfigdirs gprof target-libgloss" | |
| ;; | |
| i[[3456789]]86-*-solaris2* | x86_64-*-solaris2.1[[0-9]]*) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| i[[3456789]]86-*-sysv4*) | |
| noconfigdirs="$noconfigdirs target-libgloss" | |
| ;; | |
| i[[3456789]]86-*-beos*) | |
| noconfigdirs="$noconfigdirs gdb" | |
| ;; | |
| i[[3456789]]86-*-rdos*) | |
| noconfigdirs="$noconfigdirs gdb" | |
| ;; | |
| mmix-*-*) | |
| noconfigdirs="$noconfigdirs gdb" | |
| ;; | |
| mt-*-*) | |
| noconfigdirs="$noconfigdirs sim" | |
| ;; | |
| powerpc-*-aix*) | |
| # copied from rs6000-*-* entry | |
| noconfigdirs="$noconfigdirs gprof" | |
| ;; | |
| powerpc*-*-winnt* | powerpc*-*-pe*) | |
| target_configdirs="$target_configdirs target-winsup" | |
| noconfigdirs="$noconfigdirs gdb tcl tk target-libgloss itcl" | |
| # always build newlib. | |
| skipdirs=`echo " ${skipdirs} " | sed -e 's/ target-newlib / /'` | |
| ;; | |
| # This is temporary until we can link against shared libraries | |
| powerpcle-*-solaris*) | |
| noconfigdirs="$noconfigdirs gdb sim tcl tk itcl" | |
| ;; | |
| powerpc-*-beos*) | |
| noconfigdirs="$noconfigdirs gdb" | |
| ;; | |
| rs6000-*-lynxos*) | |
| noconfigdirs="$noconfigdirs gprof" | |
| ;; | |
| rs6000-*-aix*) | |
| noconfigdirs="$noconfigdirs gprof" | |
| ;; | |
| rs6000-*-*) | |
| noconfigdirs="$noconfigdirs gprof" | |
| ;; | |
| m68k-apollo-*) | |
| noconfigdirs="$noconfigdirs ld binutils gprof target-libgloss" | |
| ;; | |
| microblaze*) | |
| noconfigdirs="$noconfigdirs gprof" | |
| ;; | |
| mips*-sde-elf*) | |
| if test x$with_newlib = xyes; then | |
| noconfigdirs="$noconfigdirs gprof" | |
| fi | |
| ;; | |
| mips*-*-irix5*) | |
| noconfigdirs="$noconfigdirs gprof target-libgloss" | |
| ;; | |
| mips*-*-irix6*) | |
| noconfigdirs="$noconfigdirs gprof target-libgloss" | |
| ;; | |
| mips*-*-bsd*) | |
| noconfigdirs="$noconfigdirs gprof target-libgloss" | |
| ;; | |
| mips*-*-linux*) | |
| ;; | |
| mips*-*-*) | |
| noconfigdirs="$noconfigdirs gprof" | |
| ;; | |
| sh-*-* | sh64-*-*) | |
| case "${target}" in | |
| sh*-*-elf) | |
| ;; | |
| *) | |
| noconfigdirs="$noconfigdirs target-libgloss" ;; | |
| esac | |
| ;; | |
| sparc-*-sunos4*) | |
| if test x${is_cross_compiler} = xno ; then | |
| use_gnu_ld=no | |
| fi | |
| ;; | |
| tic6x-*-*) | |
| noconfigdirs="$noconfigdirs gdb sim" | |
| ;; | |
| tilepro-*-* | tilegx-*-*) | |
| noconfigdirs="$noconfigdirs sim" | |
| ;; | |
| v810-*-*) | |
| noconfigdirs="$noconfigdirs bfd binutils gas gdb ld opcodes target-libgloss" | |
| ;; | |
| vax-*-*) | |
| noconfigdirs="$noconfigdirs target-newlib target-libgloss" | |
| ;; | |
| esac | |
| # If we aren't building newlib, then don't build libgloss, since libgloss | |
| # depends upon some newlib header files. | |
| case "${noconfigdirs}" in | |
| *target-libgloss*) ;; | |
| *target-newlib*) noconfigdirs="$noconfigdirs target-libgloss" ;; | |
| esac | |
| # Work in distributions that contain no compiler tools, like Autoconf. | |
| host_makefile_frag=/dev/null | |
| if test -d ${srcdir}/config ; then | |
| case "${host}" in | |
| i[[3456789]]86-*-msdosdjgpp*) | |
| host_makefile_frag="config/mh-djgpp" | |
| ;; | |
| *-cygwin*) | |
| ACX_CHECK_CYGWIN_CAT_WORKS | |
| host_makefile_frag="config/mh-cygwin" | |
| ;; | |
| *-mingw*) | |
| host_makefile_frag="config/mh-mingw" | |
| ;; | |
| *-interix*) | |
| host_makefile_frag="config/mh-interix" | |
| ;; | |
| hppa*-hp-hpux10*) | |
| host_makefile_frag="config/mh-pa-hpux10" | |
| ;; | |
| hppa*-hp-hpux*) | |
| host_makefile_frag="config/mh-pa" | |
| ;; | |
| hppa*-*) | |
| host_makefile_frag="config/mh-pa" | |
| ;; | |
| *-*-darwin*) | |
| host_makefile_frag="config/mh-darwin" | |
| ;; | |
| powerpc-*-aix*) | |
| host_makefile_frag="config/mh-ppc-aix" | |
| ;; | |
| rs6000-*-aix*) | |
| host_makefile_frag="config/mh-ppc-aix" | |
| ;; | |
| esac | |
| fi | |
| if test "${build}" != "${host}" ; then | |
| AR_FOR_BUILD=${AR_FOR_BUILD-ar} | |
| AS_FOR_BUILD=${AS_FOR_BUILD-as} | |
| CC_FOR_BUILD=${CC_FOR_BUILD-gcc} | |
| CXX_FOR_BUILD=${CXX_FOR_BUILD-g++} | |
| GCJ_FOR_BUILD=${GCJ_FOR_BUILD-gcj} | |
| GFORTRAN_FOR_BUILD=${GFORTRAN_FOR_BUILD-gfortran} | |
| GOC_FOR_BUILD=${GOC_FOR_BUILD-gccgo} | |
| DLLTOOL_FOR_BUILD=${DLLTOOL_FOR_BUILD-dlltool} | |
| LD_FOR_BUILD=${LD_FOR_BUILD-ld} | |
| NM_FOR_BUILD=${NM_FOR_BUILD-nm} | |
| RANLIB_FOR_BUILD=${RANLIB_FOR_BUILD-ranlib} | |
| WINDRES_FOR_BUILD=${WINDRES_FOR_BUILD-windres} | |
| WINDMC_FOR_BUILD=${WINDMC_FOR_BUILD-windmc} | |
| else | |
| AR_FOR_BUILD="\$(AR)" | |
| AS_FOR_BUILD="\$(AS)" | |
| CC_FOR_BUILD="\$(CC)" | |
| CXX_FOR_BUILD="\$(CXX)" | |
| GCJ_FOR_BUILD="\$(GCJ)" | |
| GFORTRAN_FOR_BUILD="\$(GFORTRAN)" | |
| GOC_FOR_BUILD="\$(GOC)" | |
| DLLTOOL_FOR_BUILD="\$(DLLTOOL)" | |
| LD_FOR_BUILD="\$(LD)" | |
| NM_FOR_BUILD="\$(NM)" | |
| RANLIB_FOR_BUILD="\$(RANLIB)" | |
| WINDRES_FOR_BUILD="\$(WINDRES)" | |
| WINDMC_FOR_BUILD="\$(WINDMC)" | |
| fi | |
| AC_PROG_CC | |
| AC_PROG_CXX | |
| # We must set the default linker to the linker used by gcc for the correct | |
| # operation of libtool. If LD is not defined and we are using gcc, try to | |
| # set the LD default to the ld used by gcc. | |
| if test -z "$LD"; then | |
| if test "$GCC" = yes; then | |
| case $build in | |
| *-*-mingw*) | |
| gcc_prog_ld=`$CC -print-prog-name=ld 2>&1 | tr -d '\015'` ;; | |
| *) | |
| gcc_prog_ld=`$CC -print-prog-name=ld 2>&1` ;; | |
| esac | |
| case $gcc_prog_ld in | |
| # Accept absolute paths. | |
| [[\\/]* | [A-Za-z]:[\\/]*)] | |
| LD="$gcc_prog_ld" ;; | |
| esac | |
| fi | |
| fi | |
| ACX_PROG_GNAT | |
| ACX_PROG_CMP_IGNORE_INITIAL | |
| # See if we are building gcc with C++. | |
| AC_ARG_ENABLE(build-with-cxx, | |
| [AS_HELP_STRING([--enable-build-with-cxx], | |
| [build with C++ compiler instead of C compiler])], | |
| ENABLE_BUILD_WITH_CXX=$enableval, | |
| ENABLE_BUILD_WITH_CXX=no) | |
| # Used for setting $lt_cv_objdir | |
| _LT_CHECK_OBJDIR | |
| # Check for GMP, MPFR and MPC | |
| gmplibs="-lmpc -lmpfr -lgmp" | |
| gmpinc= | |
| have_gmp=no | |
| # Specify a location for mpc | |
| # check for this first so it ends up on the link line before mpfr. | |
| AC_ARG_WITH(mpc, | |
| [AS_HELP_STRING([--with-mpc=PATH], | |
| [specify prefix directory for installed MPC package. | |
| Equivalent to --with-mpc-include=PATH/include | |
| plus --with-mpc-lib=PATH/lib])]) | |
| AC_ARG_WITH(mpc-include, | |
| [AS_HELP_STRING([--with-mpc-include=PATH], | |
| [specify directory for installed MPC include files])]) | |
| AC_ARG_WITH(mpc-lib, | |
| [AS_HELP_STRING([--with-mpc-lib=PATH], | |
| [specify directory for the installed MPC library])]) | |
| if test "x$with_mpc" != x; then | |
| gmplibs="-L$with_mpc/lib $gmplibs" | |
| gmpinc="-I$with_mpc/include $gmpinc" | |
| fi | |
| if test "x$with_mpc_include" != x; then | |
| gmpinc="-I$with_mpc_include $gmpinc" | |
| fi | |
| if test "x$with_mpc_lib" != x; then | |
| gmplibs="-L$with_mpc_lib $gmplibs" | |
| fi | |
| if test "x$with_mpc$with_mpc_include$with_mpc_lib" = x && test -d ${srcdir}/mpc; then | |
| gmplibs='-L$$r/$(HOST_SUBDIR)/mpc/src/'"$lt_cv_objdir $gmplibs" | |
| gmpinc='-I$$s/mpc/src '"$gmpinc" | |
| # Do not test the mpc version. Assume that it is sufficient, since | |
| # it is in the source tree, and the library has not been built yet | |
| # but it would be included on the link line in the version check below | |
| # hence making the test fail. | |
| have_gmp=yes | |
| fi | |
| # Specify a location for mpfr | |
| # check for this first so it ends up on the link line before gmp. | |
| AC_ARG_WITH(mpfr-dir, | |
| [AS_HELP_STRING([--with-mpfr-dir=PATH], [this option has been REMOVED])], | |
| [AC_MSG_ERROR([The --with-mpfr-dir=PATH option has been removed. | |
| Use --with-mpfr=PATH or --with-mpfr-include=PATH plus --with-mpfr-lib=PATH])]) | |
| AC_ARG_WITH(mpfr, | |
| [AS_HELP_STRING([--with-mpfr=PATH], | |
| [specify prefix directory for installed MPFR package. | |
| Equivalent to --with-mpfr-include=PATH/include | |
| plus --with-mpfr-lib=PATH/lib])]) | |
| AC_ARG_WITH(mpfr-include, | |
| [AS_HELP_STRING([--with-mpfr-include=PATH], | |
| [specify directory for installed MPFR include files])]) | |
| AC_ARG_WITH(mpfr-lib, | |
| [AS_HELP_STRING([--with-mpfr-lib=PATH], | |
| [specify directory for the installed MPFR library])]) | |
| if test "x$with_mpfr" != x; then | |
| gmplibs="-L$with_mpfr/lib $gmplibs" | |
| gmpinc="-I$with_mpfr/include $gmpinc" | |
| fi | |
| if test "x$with_mpfr_include" != x; then | |
| gmpinc="-I$with_mpfr_include $gmpinc" | |
| fi | |
| if test "x$with_mpfr_lib" != x; then | |
| gmplibs="-L$with_mpfr_lib $gmplibs" | |
| fi | |
| if test "x$with_mpfr$with_mpfr_include$with_mpfr_lib" = x && test -d ${srcdir}/mpfr; then | |
| gmplibs='-L$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir $gmplibs" | |
| gmpinc='-I$$r/$(HOST_SUBDIR)/mpfr -I$$s/mpfr '"$gmpinc" | |
| extra_mpc_mpfr_configure_flags='--with-mpfr-include=$$s/mpfr --with-mpfr-lib=$$r/$(HOST_SUBDIR)/mpfr/'"$lt_cv_objdir" | |
| # Do not test the mpfr version. Assume that it is sufficient, since | |
| # it is in the source tree, and the library has not been built yet | |
| # but it would be included on the link line in the version check below | |
| # hence making the test fail. | |
| have_gmp=yes | |
| fi | |
| # Specify a location for gmp | |
| AC_ARG_WITH(gmp-dir, | |
| [AS_HELP_STRING([--with-gmp-dir=PATH], [this option has been REMOVED])], | |
| [AC_MSG_ERROR([The --with-gmp-dir=PATH option has been removed. | |
| Use --with-gmp=PATH or --with-gmp-include=PATH plus --with-gmp-lib=PATH])]) | |
| AC_ARG_WITH(gmp, | |
| [AS_HELP_STRING([--with-gmp=PATH], | |
| [specify prefix directory for the installed GMP package. | |
| Equivalent to --with-gmp-include=PATH/include | |
| plus --with-gmp-lib=PATH/lib])]) | |
| AC_ARG_WITH(gmp-include, | |
| [AS_HELP_STRING([--with-gmp-include=PATH], | |
| [specify directory for installed GMP include files])]) | |
| AC_ARG_WITH(gmp-lib, | |
| [AS_HELP_STRING([--with-gmp-lib=PATH], | |
| [specify directory for the installed GMP library])]) | |
| if test "x$with_gmp" != x; then | |
| gmplibs="-L$with_gmp/lib $gmplibs" | |
| gmpinc="-I$with_gmp/include $gmpinc" | |
| fi | |
| if test "x$with_gmp_include" != x; then | |
| gmpinc="-I$with_gmp_include $gmpinc" | |
| fi | |
| if test "x$with_gmp_lib" != x; then | |
| gmplibs="-L$with_gmp_lib $gmplibs" | |
| fi | |
| if test "x$with_gmp$with_gmp_include$with_gmp_lib" = x && test -d ${srcdir}/gmp; then | |
| gmplibs='-L$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir $gmplibs" | |
| gmpinc='-I$$r/$(HOST_SUBDIR)/gmp -I$$s/gmp '"$gmpinc" | |
| extra_mpfr_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir" | |
| extra_mpc_gmp_configure_flags='--with-gmp-include=$$r/$(HOST_SUBDIR)/gmp --with-gmp-lib=$$r/$(HOST_SUBDIR)/gmp/'"$lt_cv_objdir" | |
| # Do not test the gmp version. Assume that it is sufficient, since | |
| # it is in the source tree, and the library has not been built yet | |
| # but it would be included on the link line in the version check below | |
| # hence making the test fail. | |
| have_gmp=yes | |
| fi | |
| if test -d ${srcdir}/gcc && test "x$have_gmp" = xno; then | |
| have_gmp=yes | |
| saved_CFLAGS="$CFLAGS" | |
| CFLAGS="$CFLAGS $gmpinc" | |
| # Check for the recommended and required versions of GMP. | |
| AC_MSG_CHECKING([for the correct version of gmp.h]) | |
| AC_TRY_COMPILE([#include "gmp.h"],[ | |
| #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) | |
| #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL) | |
| #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,2,0) | |
| choke me | |
| #endif | |
| ], [AC_TRY_COMPILE([#include <gmp.h>],[ | |
| #define GCC_GMP_VERSION_NUM(a,b,c) (((a) << 16L) | ((b) << 8) | (c)) | |
| #define GCC_GMP_VERSION GCC_GMP_VERSION_NUM(__GNU_MP_VERSION,__GNU_MP_VERSION_MINOR,__GNU_MP_VERSION_PATCHLEVEL) | |
| #if GCC_GMP_VERSION < GCC_GMP_VERSION_NUM(4,3,2) | |
| choke me | |
| #endif | |
| ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])], | |
| [AC_MSG_RESULT([no]); have_gmp=no]) | |
| # If we have GMP, check the MPFR version. | |
| if test x"$have_gmp" = xyes; then | |
| # Check for the recommended and required versions of MPFR. | |
| AC_MSG_CHECKING([for the correct version of mpfr.h]) | |
| AC_TRY_COMPILE([#include <gmp.h> | |
| #include <mpfr.h>],[ | |
| #if MPFR_VERSION < MPFR_VERSION_NUM(2,3,1) | |
| choke me | |
| #endif | |
| ], [AC_TRY_COMPILE([#include <gmp.h> | |
| #include <mpfr.h>],[ | |
| #if MPFR_VERSION < MPFR_VERSION_NUM(2,4,2) | |
| choke me | |
| #endif | |
| ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])], | |
| [AC_MSG_RESULT([no]); have_gmp=no]) | |
| fi | |
| # Check for the MPC header version. | |
| if test x"$have_gmp" = xyes ; then | |
| # Check for the recommended and required versions of MPC. | |
| AC_MSG_CHECKING([for the correct version of mpc.h]) | |
| AC_TRY_COMPILE([#include <mpc.h>],[ | |
| #if MPC_VERSION < MPC_VERSION_NUM(0,8,0) | |
| choke me | |
| #endif | |
| ], [AC_TRY_COMPILE([#include <mpc.h>],[ | |
| #if MPC_VERSION < MPC_VERSION_NUM(0,8,1) | |
| choke me | |
| #endif | |
| ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([buggy but acceptable])])], | |
| [AC_MSG_RESULT([no]); have_gmp=no]) | |
| fi | |
| # Now check the MPFR library. | |
| if test x"$have_gmp" = xyes; then | |
| saved_LIBS="$LIBS" | |
| LIBS="$LIBS $gmplibs" | |
| AC_MSG_CHECKING([for the correct version of the gmp/mpfr/mpc libraries]) | |
| AC_TRY_LINK([#include <mpc.h>],[ | |
| mpfr_t n; | |
| mpfr_t x; | |
| mpc_t c; | |
| int t; | |
| mpfr_init (n); | |
| mpfr_init (x); | |
| mpfr_atan2 (n, n, x, GMP_RNDN); | |
| mpfr_erfc (n, x, GMP_RNDN); | |
| mpfr_subnormalize (x, t, GMP_RNDN); | |
| mpfr_clear(n); | |
| mpfr_clear(x); | |
| mpc_init2 (c, 53); | |
| mpc_set_ui_ui (c, 1, 1, MPC_RNDNN); | |
| mpc_cosh (c, c, MPC_RNDNN); | |
| mpc_pow (c, c, c, MPC_RNDNN); | |
| mpc_acosh (c, c, MPC_RNDNN); | |
| mpc_clear (c); | |
| ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); have_gmp=no]) | |
| LIBS="$saved_LIBS" | |
| fi | |
| CFLAGS="$saved_CFLAGS" | |
| # The library versions listed in the error message below should match | |
| # the HARD-minimums enforced above. | |
| if test x$have_gmp != xyes; then | |
| AC_MSG_ERROR([Building GCC requires GMP 4.2+, MPFR 2.3.1+ and MPC 0.8.0+. | |
| Try the --with-gmp, --with-mpfr and/or --with-mpc options to specify | |
| their locations. Source code for these libraries can be found at | |
| their respective hosting sites as well as at | |
| ftp://gcc.gnu.org/pub/gcc/infrastructure/. See also | |
| http://gcc.gnu.org/install/prerequisites.html for additional info. If | |
| you obtained GMP, MPFR and/or MPC from a vendor distribution package, | |
| make sure that you have installed both the libraries and the header | |
| files. They may be located in separate packages.]) | |
| fi | |
| fi | |
| # Flags needed for both GMP, MPFR and/or MPC. | |
| AC_SUBST(gmplibs) | |
| AC_SUBST(gmpinc) | |
| AC_SUBST(extra_mpfr_configure_flags) | |
| AC_SUBST(extra_mpc_gmp_configure_flags) | |
| AC_SUBST(extra_mpc_mpfr_configure_flags) | |
| # Allow host libstdc++ to be specified for static linking with PPL. | |
| AC_ARG_WITH(host-libstdcxx, | |
| [AS_HELP_STRING([--with-host-libstdcxx=L], | |
| [use linker arguments L to link with libstdc++ | |
| when linking with PPL])]) | |
| case $with_host_libstdcxx in | |
| no|yes) | |
| AC_MSG_ERROR([-with-host-libstdcxx needs an argument]) | |
| ;; | |
| esac | |
| # Linker flags to use for stage1 or when not boostrapping. | |
| AC_ARG_WITH(stage1-ldflags, | |
| [AS_HELP_STRING([--with-stage1-ldflags=FLAGS], [linker flags for stage1])], | |
| [if test "$withval" = "no" -o "$withval" = "yes"; then | |
| stage1_ldflags= | |
| else | |
| stage1_ldflags=$withval | |
| fi], | |
| [stage1_ldflags=]) | |
| AC_SUBST(stage1_ldflags) | |
| # Libraries to use for stage1 or when not bootstrapping. | |
| AC_ARG_WITH(stage1-libs, | |
| [AS_HELP_STRING([--with-stage1-libs=LIBS], [libraries for stage1])], | |
| [if test "$withval" = "no" -o "$withval" = "yes"; then | |
| stage1_libs= | |
| else | |
| stage1_libs=$withval | |
| fi], | |
| [stage1_libs=$with_host_libstdcxx]) | |
| AC_SUBST(stage1_libs) | |
| # Libraries to use for stage2 and later builds. This defaults to the | |
| # argument passed to --with-host-libstdcxx. | |
| AC_ARG_WITH(boot-libs, | |
| [AS_HELP_STRING([--with-boot-libs=LIBS], [libraries for stage2 and later])], | |
| [if test "$withval" = "no" -o "$withval" = "yes"; then | |
| poststage1_libs= | |
| else | |
| poststage1_libs=$withval | |
| fi], | |
| [poststage1_libs=$with_host_libstdcxx]) | |
| AC_SUBST(poststage1_libs) | |
| # Linker flags to use for stage2 and later builds. | |
| AC_ARG_WITH(boot-ldflags, | |
| [AS_HELP_STRING([--with-boot-ldflags=FLAGS], | |
| [linker flags for stage2 and later])], | |
| [if test "$withval" = "no" -o "$withval" = "yes"; then | |
| poststage1_ldflags= | |
| else | |
| poststage1_ldflags=$withval | |
| fi], | |
| [poststage1_ldflags= | |
| # In stages 2 and 3, default to linking libstdc++ and libgcc | |
| # statically. But if the user explicitly specified the libraries to | |
| # use, trust that they are doing what they want. | |
| if test "$poststage1_libs" = ""; then | |
| poststage1_ldflags="-static-libstdc++ -static-libgcc" | |
| fi]) | |
| AC_SUBST(poststage1_ldflags) | |
| # Check for PPL | |
| ppllibs= | |
| pplinc= | |
| pwllib= | |
| AC_ARG_WITH(ppl, | |
| [AS_HELP_STRING([--with-ppl=PATH], | |
| [specify prefix directory for the installed PPL package. | |
| Equivalent to --with-ppl-include=PATH/include | |
| plus --with-ppl-lib=PATH/lib])]) | |
| AC_ARG_WITH(ppl-include, | |
| [AS_HELP_STRING([--with-ppl-include=PATH], | |
| [specify directory for installed PPL include files])]) | |
| AC_ARG_WITH(ppl-lib, | |
| [AS_HELP_STRING([--with-ppl-lib=PATH], | |
| [specify directory for the installed PPL library])]) | |
| AC_ARG_ENABLE(ppl-version-check, | |
| [AS_HELP_STRING([--disable-ppl-version-check], | |
| [disable check for PPL version])]) | |
| case $with_ppl in | |
| yes | no | "") | |
| ;; | |
| *) | |
| ppllibs="-L$with_ppl/lib" | |
| pplinc="-I$with_ppl/include $pplinc" | |
| if test -d "$with_ppl/lib" && test -d "$with_ppl/include"; then | |
| with_ppl=yes | |
| else | |
| AC_MSG_ERROR([cannot find directories "$with_ppl/lib" or "$with_ppl/include"]) | |
| fi | |
| ;; | |
| esac | |
| if test x"$with_ppl_include" != x; then | |
| pplinc="-I$with_ppl_include $pplinc" | |
| with_ppl=yes | |
| fi | |
| if test "x$with_ppl_lib" != x; then | |
| ppllibs="-L$with_ppl_lib" | |
| with_ppl=yes | |
| fi | |
| if test x"$with_ppl$with_ppl_include$with_ppl_lib" = x && test -d ${srcdir}/ppl; then | |
| if test x"$enable_watchdog" = xyes; then | |
| pwllib="-lpwl" | |
| fi | |
| ppllibs='-L$$r/$(HOST_SUBDIR)/ppl/interfaces/C/'"$lt_cv_objdir"' -L$$r/$(HOST_SUBDIR)/ppl/src/'"$lt_cv_objdir" | |
| pplinc='-I$$r/$(HOST_SUBDIR)/ppl/src -I$$r/$(HOST_SUBDIR)/ppl/interfaces/C ' | |
| enable_ppl_version_check=no | |
| with_ppl=yes | |
| fi | |
| if test "x$with_ppl" != xno; then | |
| if test "x$pwllib" = x; then | |
| saved_LIBS="$LIBS" | |
| LIBS="$LIBS $ppllibs -lstdc++ -lm" | |
| AC_CHECK_LIB(pwl, PWL_handle_timeout, [pwllib="-lpwl"]) | |
| LIBS="$saved_LIBS" | |
| fi | |
| ppllibs="$ppllibs -lppl_c -lppl $pwllib -lgmpxx" | |
| if test "$enable_ppl_version_check" != no; then | |
| saved_CFLAGS="$CFLAGS" | |
| CFLAGS="$CFLAGS $pplinc $gmpinc" | |
| AC_MSG_CHECKING([for version 0.11 (revision 0 or later) of PPL]) | |
| AC_TRY_COMPILE([#include "ppl_c.h"],[ | |
| #if PPL_VERSION_MAJOR != 0 || PPL_VERSION_MINOR < 11 | |
| choke me | |
| #endif | |
| ], [AC_MSG_RESULT([yes])], [AC_MSG_RESULT([no]); ppllibs= ; pplinc= ; with_ppl=no ]) | |
| CFLAGS="$saved_CFLAGS" | |
| fi | |
| fi | |
| # Flags needed for PPL | |
| AC_SUBST(ppllibs) | |
| AC_SUBST(pplinc) | |
| # Check for CLOOG | |
| dnl Provide configure switches and initialize clooginc & clooglibs | |
| dnl with user input. | |
| CLOOG_INIT_FLAGS | |
| if test "x$with_ppl" = "xno"; then | |
| dnl Only execute fail-action, if CLooG has been requested. | |
| CLOOG_REQUESTED([graphite_requested=yes], [graphite_requested=no]) | |
| if test "${graphite_requested}" = yes; then | |
| AC_MSG_ERROR([Unable to find a usable PPL. See config.log for details.]) | |
| fi | |
| with_cloog=no | |
| fi | |
| if test "x${with_cloog}" = x && test "x${with_cloog_include}" = x \ | |
| && test "x${with_cloog_lib}" = x && test -d ${srcdir}/cloog; then | |
| clooglibs='-L$$r/$(HOST_SUBDIR)/cloog/'"$lt_cv_objdir"' ' | |
| clooginc='-I$$r/$(HOST_SUBDIR)/cloog/include -I$$s/cloog/include ' | |
| fi | |
| if test "x$with_cloog" != "xno"; then | |
| dnl The minimal version of CLooG required for Graphite. | |
| dnl | |
| dnl If we use CLooG-Legacy, the provided version information is | |
| dnl ignored. | |
| CLOOG_CHECK_VERSION(0,16,1) | |
| dnl Only execute fail-action, if CLooG has been requested. | |
| CLOOG_IF_FAILED([ | |
| AC_MSG_ERROR([Unable to find a usable CLooG. See config.log for details.])]) | |
| fi | |
| # Check for LTO support. | |
| AC_ARG_ENABLE(lto, | |
| [AS_HELP_STRING([--enable-lto], [enable link time optimization support])], | |
| enable_lto=$enableval, | |
| enable_lto=yes; default_enable_lto=yes) | |
| ACX_ELF_TARGET_IFELSE([# ELF platforms build the lto-plugin always. | |
| build_lto_plugin=yes | |
| ],[if test x"$default_enable_lto" = x"yes" ; then | |
| case $target in | |
| *-apple-darwin9* | *-cygwin* | *-mingw*) ;; | |
| # On other non-ELF platforms, LTO has yet to be validated. | |
| *) enable_lto=no ;; | |
| esac | |
| else | |
| # Apart from ELF platforms, only Windows and Darwin support LTO so far. | |
| # It would also be nice to check the binutils support, but we don't | |
| # have gcc_GAS_CHECK_FEATURE available here. For now, we'll just | |
| # warn during gcc/ subconfigure; unless you're bootstrapping with | |
| # -flto it won't be needed until after installation anyway. | |
| case $target in | |
| *-cygwin* | *-mingw* | *-apple-darwin*) ;; | |
| *) if test x"$enable_lto" = x"yes"; then | |
| AC_MSG_ERROR([LTO support is not enabled for this target.]) | |
| fi | |
| ;; | |
| esac | |
| fi | |
| # Among non-ELF, only Windows platforms support the lto-plugin so far. | |
| # Build it unless LTO was explicitly disabled. | |
| case $target in | |
| *-cygwin* | *-mingw*) build_lto_plugin=$enable_lto ;; | |
| *) ;; | |
| esac | |
| ]) | |
| # By default, C is the only stage 1 language. | |
| stage1_languages=,c, | |
| # Target libraries that we bootstrap. | |
| bootstrap_target_libs=,target-libgcc, | |
| # Figure out what language subdirectories are present. | |
| # Look if the user specified --enable-languages="..."; if not, use | |
| # the environment variable $LANGUAGES if defined. $LANGUAGES might | |
| # go away some day. | |
| # NB: embedded tabs in this IF block -- do not untabify | |
| if test -d ${srcdir}/gcc; then | |
| if test x"${enable_languages+set}" != xset; then | |
| if test x"${LANGUAGES+set}" = xset; then | |
| enable_languages="${LANGUAGES}" | |
| echo configure.in: warning: setting LANGUAGES is deprecated, use --enable-languages instead 1>&2 | |
| else | |
| enable_languages=all | |
| fi | |
| else | |
| if test x"${enable_languages}" = x || | |
| test x"${enable_languages}" = xyes; | |
| then | |
| echo configure.in: --enable-languages needs at least one language argument 1>&2 | |
| exit 1 | |
| fi | |
| fi | |
| enable_languages=`echo "${enable_languages}" | sed -e 's/[[ ,]][[ ,]]*/,/g' -e 's/,$//'` | |
| # 'f95' is the old name for the 'fortran' language. We issue a warning | |
| # and make the substitution. | |
| case ,${enable_languages}, in | |
| *,f95,*) | |
| echo configure.in: warning: 'f95' as language name is deprecated, use 'fortran' instead 1>&2 | |
| enable_languages=`echo "${enable_languages}" | sed -e 's/f95/fortran/g'` | |
| ;; | |
| esac | |
| # First scan to see if an enabled language requires some other language. | |
| # We assume that a given config-lang.in will list all the language | |
| # front ends it requires, even if some are required indirectly. | |
| for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do | |
| case ${lang_frag} in | |
| ..) ;; | |
| # The odd quoting in the next line works around | |
| # an apparent bug in bash 1.12 on linux. | |
| ${srcdir}/gcc/[[*]]/config-lang.in) ;; | |
| *) | |
| # From the config-lang.in, get $language, $lang_requires, and | |
| # $lang_requires_boot_languages. | |
| language= | |
| lang_requires= | |
| lang_requires_boot_languages= | |
| . ${lang_frag} | |
| for other in ${lang_requires} ${lang_requires_boot_languages}; do | |
| case ,${enable_languages}, in | |
| *,$other,*) ;; | |
| *,all,*) ;; | |
| *,$language,*) | |
| echo " \`$other' language required by \`$language'; enabling" 1>&2 | |
| enable_languages="${enable_languages},${other}" | |
| ;; | |
| esac | |
| done | |
| for other in ${lang_requires_boot_languages} ; do | |
| if test "$other" != "c"; then | |
| case ,${enable_stage1_languages}, in | |
| *,$other,*) ;; | |
| *,all,*) ;; | |
| *) | |
| case ,${enable_languages}, in | |
| *,$language,*) | |
| echo " '$other' language required by '$language' in stage 1; enabling" 1>&2 | |
| enable_stage1_languages="$enable_stage1_languages,${other}" | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| fi | |
| done | |
| ;; | |
| esac | |
| done | |
| new_enable_languages=,c, | |
| # If LTO is enabled, add the LTO front end. | |
| extra_host_libiberty_configure_flags= | |
| if test "$enable_lto" = "yes" ; then | |
| case ,${enable_languages}, in | |
| *,lto,*) ;; | |
| *) enable_languages="${enable_languages},lto" ;; | |
| esac | |
| if test "${build_lto_plugin}" = "yes" ; then | |
| configdirs="$configdirs lto-plugin" | |
| extra_host_libiberty_configure_flags=--enable-shared | |
| fi | |
| fi | |
| AC_SUBST(extra_host_libiberty_configure_flags) | |
| missing_languages=`echo ",$enable_languages," | sed -e s/,all,/,/ -e s/,c,/,/ ` | |
| potential_languages=,c, | |
| enabled_target_libs= | |
| disabled_target_libs= | |
| for lang_frag in ${srcdir}/gcc/*/config-lang.in .. ; do | |
| case ${lang_frag} in | |
| ..) ;; | |
| # The odd quoting in the next line works around | |
| # an apparent bug in bash 1.12 on linux. | |
| ${srcdir}/gcc/[[*]]/config-lang.in) ;; | |
| *) | |
| # From the config-lang.in, get $language, $target_libs, | |
| # $lang_dirs, $boot_language, and $build_by_default | |
| language= | |
| target_libs= | |
| lang_dirs= | |
| subdir_requires= | |
| boot_language=no | |
| build_by_default=yes | |
| . ${lang_frag} | |
| if test x${language} = x; then | |
| echo "${lang_frag} doesn't set \$language." 1>&2 | |
| exit 1 | |
| fi | |
| if test "$language" = "c++" \ | |
| && test "$ENABLE_BUILD_WITH_CXX" = "yes"; then | |
| boot_language=yes | |
| fi | |
| case ,${enable_languages}, in | |
| *,${language},*) | |
| # Language was explicitly selected; include it. | |
| add_this_lang=yes | |
| ;; | |
| *,all,*) | |
| # 'all' was selected, select it if it is a default language | |
| add_this_lang=${build_by_default} | |
| ;; | |
| *) | |
| add_this_lang=no | |
| ;; | |
| esac | |
| # Disable languages that need other directories if these aren't available. | |
| for i in $subdir_requires; do | |
| test -f "$srcdir/gcc/$i/config-lang.in" && continue | |
| case ,${enable_languages}, in | |
| *,${language},*) | |
| # Specifically requested language; tell them. | |
| AC_MSG_ERROR([The gcc/$i directory contains parts of $language but is missing]) | |
| ;; | |
| *) | |
| # Silently disable. | |
| add_this_lang=unsupported | |
| ;; | |
| esac | |
| done | |
| # Disable Ada if no preexisting GNAT is available. | |
| case ,${enable_languages},:${language}:${have_gnat} in | |
| *,${language},*:ada:no) | |
| # Specifically requested language; tell them. | |
| AC_MSG_ERROR([GNAT is required to build $language]) | |
| ;; | |
| *:ada:no) | |
| # Silently disable. | |
| add_this_lang=unsupported | |
| ;; | |
| esac | |
| # Disable a language that is unsupported by the target. | |
| case " $unsupported_languages " in | |
| *" $language "*) | |
| add_this_lang=unsupported | |
| ;; | |
| esac | |
| case $add_this_lang in | |
| unsupported) | |
| # Remove language-dependent dirs. | |
| disabled_target_libs="$disabled_target_libs $target_libs" | |
| noconfigdirs="$noconfigdirs $lang_dirs" | |
| ;; | |
| no) | |
| # Remove language-dependent dirs; still show language as supported. | |
| disabled_target_libs="$disabled_target_libs $target_libs" | |
| noconfigdirs="$noconfigdirs $lang_dirs" | |
| potential_languages="${potential_languages}${language}," | |
| ;; | |
| yes) | |
| new_enable_languages="${new_enable_languages}${language}," | |
| potential_languages="${potential_languages}${language}," | |
| missing_languages=`echo "$missing_languages" | sed "s/,$language,/,/"` | |
| enabled_target_libs="$enabled_target_libs $target_libs" | |
| case "${boot_language}:,$enable_stage1_languages," in | |
| yes:* | *:*,$language,* | *:*,yes, | *:*,all,) | |
| # Add to (comma-separated) list of stage 1 languages. | |
| case ",$stage1_languages," in | |
| *,$language,* | ,yes, | ,all,) ;; | |
| *) stage1_languages="${stage1_languages}${language}," ;; | |
| esac | |
| # We need to bootstrap any supporting libraries. | |
| bootstrap_target_libs="${bootstrap_target_libs}${target_libs}," | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| done | |
| # Add target libraries which are only needed for disabled languages | |
| # to noconfigdirs. | |
| if test -n "$disabled_target_libs"; then | |
| for dir in $disabled_target_libs; do | |
| case " $enabled_target_libs " in | |
| *" ${dir} "*) ;; | |
| *) noconfigdirs="$noconfigdirs $dir" ;; | |
| esac | |
| done | |
| fi | |
| AC_ARG_ENABLE(stage1-languages, | |
| [AS_HELP_STRING([[--enable-stage1-languages[=all]]], | |
| [choose additional languages to build during | |
| stage1. Mostly useful for compiler development])], | |
| [case ,${enable_stage1_languages}, in | |
| ,no,|,,) | |
| # Set it to something that will have no effect in the loop below | |
| enable_stage1_languages=c ;; | |
| ,yes,) | |
| enable_stage1_languages=`echo $new_enable_languages | \ | |
| sed -e "s/^,//" -e "s/,$//" ` ;; | |
| *,all,*) | |
| enable_stage1_languages=`echo ,$enable_stage1_languages, | \ | |
| sed -e "s/,all,/$new_enable_languages/" -e "s/^,//" -e "s/,$//" ` ;; | |
| esac | |
| # Add "good" languages from enable_stage1_languages to stage1_languages, | |
| # while "bad" languages go in missing_languages. Leave no duplicates. | |
| for i in `echo $enable_stage1_languages | sed 's/,/ /g' `; do | |
| case $potential_languages in | |
| *,$i,*) | |
| case $stage1_languages in | |
| *,$i,*) ;; | |
| *) stage1_languages="$stage1_languages$i," ;; | |
| esac ;; | |
| *) | |
| case $missing_languages in | |
| *,$i,*) ;; | |
| *) missing_languages="$missing_languages$i," ;; | |
| esac ;; | |
| esac | |
| done]) | |
| # Remove leading/trailing commas that were added for simplicity | |
| potential_languages=`echo "$potential_languages" | sed -e "s/^,//" -e "s/,$//"` | |
| missing_languages=`echo "$missing_languages" | sed -e "s/^,//" -e "s/,$//"` | |
| stage1_languages=`echo "$stage1_languages" | sed -e "s/^,//" -e "s/,$//"` | |
| new_enable_languages=`echo "$new_enable_languages" | sed -e "s/^,//" -e "s/,$//"` | |
| if test "x$missing_languages" != x; then | |
| AC_MSG_ERROR([ | |
| The following requested languages could not be built: ${missing_languages} | |
| Supported languages are: ${potential_languages}]) | |
| fi | |
| if test "x$new_enable_languages" != "x$enable_languages"; then | |
| echo The following languages will be built: ${new_enable_languages} | |
| enable_languages="$new_enable_languages" | |
| fi | |
| AC_SUBST(stage1_languages) | |
| ac_configure_args=`echo " $ac_configure_args" | sed -e "s/ '--enable-languages=[[^ ]]*'//g" -e "s/$/ '--enable-languages="$enable_languages"'/" ` | |
| fi | |
| # Handle --disable-<component> generically. | |
| for dir in $configdirs $build_configdirs $target_configdirs ; do | |
| dirname=`echo $dir | sed -e s/target-//g -e s/build-//g -e s/-/_/g` | |
| varname=`echo $dirname | sed -e s/+/_/g` | |
| if eval test x\${enable_${varname}} "=" xno ; then | |
| noconfigdirs="$noconfigdirs $dir" | |
| fi | |
| done | |
| # Check for Boehm's garbage collector | |
| AC_ARG_ENABLE(objc-gc, | |
| [AS_HELP_STRING([--enable-objc-gc], | |
| [enable use of Boehm's garbage collector with the | |
| GNU Objective-C runtime])], | |
| [case ,${enable_languages},:${enable_objc_gc}:${noconfigdirs} in | |
| *,objc,*:*:yes:*target-boehm-gc*) | |
| AC_MSG_ERROR([Boehm's garbage collector was requested yet not supported in this configuration]) | |
| ;; | |
| esac]) | |
| # Make sure we only build Boehm's garbage collector if required. | |
| case ,${enable_languages},:${enable_objc_gc} in | |
| *,objc,*:yes) | |
| # Keep target-boehm-gc if requested for Objective-C. | |
| ;; | |
| *) | |
| # Otherwise remove target-boehm-gc depending on target-libjava. | |
| if echo " ${noconfigdirs} " | grep "target-libjava" >/dev/null 2>&1; then | |
| noconfigdirs="$noconfigdirs target-boehm-gc" | |
| fi | |
| ;; | |
| esac | |
| # Remove the entries in $skipdirs and $noconfigdirs from $configdirs, | |
| # $build_configdirs and $target_configdirs. | |
| # If we have the source for $noconfigdirs entries, add them to $notsupp. | |
| notsupp="" | |
| for dir in . $skipdirs $noconfigdirs ; do | |
| dirname=`echo $dir | sed -e s/target-//g -e s/build-//g` | |
| if test $dir != . && echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then | |
| configdirs=`echo " ${configdirs} " | sed -e "s/ ${dir} / /"` | |
| if test -r $srcdir/$dirname/configure ; then | |
| if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then | |
| true | |
| else | |
| notsupp="$notsupp $dir" | |
| fi | |
| fi | |
| fi | |
| if test $dir != . && echo " ${build_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then | |
| build_configdirs=`echo " ${build_configdirs} " | sed -e "s/ ${dir} / /"` | |
| if test -r $srcdir/$dirname/configure ; then | |
| if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then | |
| true | |
| else | |
| notsupp="$notsupp $dir" | |
| fi | |
| fi | |
| fi | |
| if test $dir != . && echo " ${target_configdirs} " | grep " ${dir} " >/dev/null 2>&1; then | |
| target_configdirs=`echo " ${target_configdirs} " | sed -e "s/ ${dir} / /"` | |
| if test -r $srcdir/$dirname/configure ; then | |
| if echo " ${skipdirs} " | grep " ${dir} " >/dev/null 2>&1; then | |
| true | |
| else | |
| notsupp="$notsupp $dir" | |
| fi | |
| fi | |
| fi | |
| done | |
| # Sometimes the tools are distributed with libiberty but with no other | |
| # libraries. In that case, we don't want to build target-libiberty. | |
| # Don't let libgcc imply libiberty either. | |
| if test -n "${target_configdirs}" ; then | |
| libgcc= | |
| others= | |
| for i in `echo ${target_configdirs} | sed -e s/target-//g` ; do | |
| if test "$i" = "libgcc"; then | |
| libgcc=target-libgcc | |
| elif test "$i" != "libiberty" ; then | |
| if test -r $srcdir/$i/configure ; then | |
| others=yes; | |
| break; | |
| fi | |
| fi | |
| done | |
| if test -z "${others}" ; then | |
| target_configdirs=$libgcc | |
| fi | |
| fi | |
| # Quietly strip out all directories which aren't configurable in this tree. | |
| # This relies on all configurable subdirectories being autoconfiscated, which | |
| # is now the case. | |
| build_configdirs_all="$build_configdirs" | |
| build_configdirs= | |
| for i in ${build_configdirs_all} ; do | |
| j=`echo $i | sed -e s/build-//g` | |
| if test -f ${srcdir}/$j/configure ; then | |
| build_configdirs="${build_configdirs} $i" | |
| fi | |
| done | |
| configdirs_all="$configdirs" | |
| configdirs= | |
| for i in ${configdirs_all} ; do | |
| if test -f ${srcdir}/$i/configure ; then | |
| configdirs="${configdirs} $i" | |
| fi | |
| done | |
| target_configdirs_all="$target_configdirs" | |
| target_configdirs= | |
| for i in ${target_configdirs_all} ; do | |
| j=`echo $i | sed -e s/target-//g` | |
| if test -f ${srcdir}/$j/configure ; then | |
| target_configdirs="${target_configdirs} $i" | |
| fi | |
| done | |
| # Produce a warning message for the subdirs we can't configure. | |
| # This isn't especially interesting in the Cygnus tree, but in the individual | |
| # FSF releases, it's important to let people know when their machine isn't | |
| # supported by the one or two programs in a package. | |
| if test -n "${notsupp}" && test -z "${norecursion}" ; then | |
| # If $appdirs is non-empty, at least one of those directories must still | |
| # be configured, or we error out. (E.g., if the gas release supports a | |
| # specified target in some subdirs but not the gas subdir, we shouldn't | |
| # pretend that all is well.) | |
| if test -n "$appdirs" ; then | |
| for dir in $appdirs ; do | |
| if test -r $dir/Makefile.in ; then | |
| if echo " ${configdirs} " | grep " ${dir} " >/dev/null 2>&1; then | |
| appdirs="" | |
| break | |
| fi | |
| if echo " ${target_configdirs} " | grep " target-${dir} " >/dev/null 2>&1; then | |
| appdirs="" | |
| break | |
| fi | |
| fi | |
| done | |
| if test -n "$appdirs" ; then | |
| echo "*** This configuration is not supported by this package." 1>&2 | |
| exit 1 | |
| fi | |
| fi | |
| # Okay, some application will build, or we don't care to check. Still | |
| # notify of subdirs not getting built. | |
| echo "*** This configuration is not supported in the following subdirectories:" 1>&2 | |
| echo " ${notsupp}" 1>&2 | |
| echo " (Any other directories should still work fine.)" 1>&2 | |
| fi | |
| case "$host" in | |
| *msdosdjgpp*) | |
| enable_gdbtk=no ;; | |
| esac | |
| # To find our prefix, in gcc_cv_tool_prefix. | |
| ACX_TOOL_DIRS | |
| copy_dirs= | |
| AC_ARG_WITH([build-sysroot], | |
| [AS_HELP_STRING([--with-build-sysroot=SYSROOT], | |
| [use sysroot as the system root during the build])], | |
| [if test x"$withval" != x ; then | |
| SYSROOT_CFLAGS_FOR_TARGET="--sysroot=$withval" | |
| fi], | |
| [SYSROOT_CFLAGS_FOR_TARGET=]) | |
| AC_SUBST(SYSROOT_CFLAGS_FOR_TARGET) | |
| AC_ARG_WITH([debug-prefix-map], | |
| [AS_HELP_STRING([--with-debug-prefix-map='A=B C=D ...'], | |
| [map A to B, C to D ... in debug information])], | |
| [if test x"$withval" != x; then | |
| DEBUG_PREFIX_CFLAGS_FOR_TARGET= | |
| for debug_map in $withval; do | |
| DEBUG_PREFIX_CFLAGS_FOR_TARGET="$DEBUG_PREFIX_CFLAGS_FOR_TARGET -fdebug-prefix-map=$debug_map" | |
| done | |
| fi], | |
| [DEBUG_PREFIX_CFLAGS_FOR_TARGET=]) | |
| AC_SUBST(DEBUG_PREFIX_CFLAGS_FOR_TARGET) | |
| # During gcc bootstrap, if we use some random cc for stage1 then CFLAGS | |
| # might be empty or "-g". We don't require a C++ compiler, so CXXFLAGS | |
| # might also be empty (or "-g", if a non-GCC C++ compiler is in the path). | |
| # We want to ensure that TARGET libraries (which we know are built with | |
| # gcc) are built with "-O2 -g", so include those options when setting | |
| # CFLAGS_FOR_TARGET and CXXFLAGS_FOR_TARGET. | |
| if test "x$CFLAGS_FOR_TARGET" = x; then | |
| CFLAGS_FOR_TARGET=$CFLAGS | |
| case " $CFLAGS " in | |
| *" -O2 "*) ;; | |
| *) CFLAGS_FOR_TARGET="-O2 $CFLAGS" ;; | |
| esac | |
| case " $CFLAGS " in | |
| *" -g "* | *" -g3 "*) ;; | |
| *) CFLAGS_FOR_TARGET="-g $CFLAGS" ;; | |
| esac | |
| fi | |
| AC_SUBST(CFLAGS_FOR_TARGET) | |
| if test "x$CXXFLAGS_FOR_TARGET" = x; then | |
| CXXFLAGS_FOR_TARGET=$CXXFLAGS | |
| case " $CXXFLAGS " in | |
| *" -O2 "*) ;; | |
| *) CXXFLAGS_FOR_TARGET="-O2 $CXXFLAGS" ;; | |
| esac | |
| case " $CXXFLAGS " in | |
| *" -g "* | *" -g3 "*) ;; | |
| *) CXXFLAGS_FOR_TARGET="-g $CXXFLAGS" ;; | |
| esac | |
| fi | |
| AC_SUBST(CXXFLAGS_FOR_TARGET) | |
| AC_SUBST(LDFLAGS_FOR_TARGET) | |
| # Handle --with-headers=XXX. If the value is not "yes", the contents of | |
| # the named directory are copied to $(tooldir)/sys-include. | |
| if test x"${with_headers}" != x && test x"${with_headers}" != xno ; then | |
| if test x${is_cross_compiler} = xno ; then | |
| echo 1>&2 '***' --with-headers is only supported when cross compiling | |
| exit 1 | |
| fi | |
| if test x"${with_headers}" != xyes ; then | |
| x=${gcc_cv_tool_prefix} | |
| copy_dirs="${copy_dirs} ${with_headers} $x/${target_noncanonical}/sys-include" | |
| fi | |
| fi | |
| # Handle --with-libs=XXX. If the value is not "yes", the contents of | |
| # the name directories are copied to $(tooldir)/lib. Multiple directories | |
| # are permitted. | |
| if test x"${with_libs}" != x && test x"${with_libs}" != xno ; then | |
| if test x${is_cross_compiler} = xno ; then | |
| echo 1>&2 '***' --with-libs is only supported when cross compiling | |
| exit 1 | |
| fi | |
| if test x"${with_libs}" != xyes ; then | |
| # Copy the libraries in reverse order, so that files in the first named | |
| # library override files in subsequent libraries. | |
| x=${gcc_cv_tool_prefix} | |
| for l in ${with_libs}; do | |
| copy_dirs="$l $x/${target_noncanonical}/lib ${copy_dirs}" | |
| done | |
| fi | |
| fi | |
| # Set with_gnu_as, with_gnu_ld, and with_system_zlib as appropriate. | |
| # | |
| # This is done by determining whether or not the appropriate directory | |
| # is available, and by checking whether or not specific configurations | |
| # have requested that this magic not happen. | |
| # | |
| # The command line options always override the explicit settings in | |
| # configure.in, and the settings in configure.in override this magic. | |
| # | |
| # If the default for a toolchain is to use GNU as and ld, and you don't | |
| # want to do that, then you should use the --without-gnu-as and | |
| # --without-gnu-ld options for the configure script. Similarly, if | |
| # the default is to use the included zlib and you don't want to do that, | |
| # you should use the --with-system-zlib option for the configure script. | |
| if test x${use_gnu_as} = x && | |
| echo " ${configdirs} " | grep " gas " > /dev/null 2>&1 ; then | |
| with_gnu_as=yes | |
| extra_host_args="$extra_host_args --with-gnu-as" | |
| fi | |
| if test x${use_gnu_ld} = x && | |
| echo " ${configdirs} " | egrep " (go)?ld " > /dev/null 2>&1 ; then | |
| with_gnu_ld=yes | |
| extra_host_args="$extra_host_args --with-gnu-ld" | |
| fi | |
| if test x${use_included_zlib} = x && | |
| echo " ${configdirs} " | grep " zlib " > /dev/null 2>&1 ; then | |
| : | |
| else | |
| with_system_zlib=yes | |
| extra_host_args="$extra_host_args --with-system-zlib" | |
| fi | |
| # If using newlib, add --with-newlib to the extra_host_args so that gcc/configure | |
| # can detect this case. | |
| if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " target-newlib " > /dev/null 2>&1 ; then | |
| with_newlib=yes | |
| extra_host_args="$extra_host_args --with-newlib" | |
| fi | |
| # Handle ${copy_dirs} | |
| set fnord ${copy_dirs} | |
| shift | |
| while test $# != 0 ; do | |
| if test -f $2/COPIED && test x"`cat $2/COPIED`" = x"$1" ; then | |
| : | |
| else | |
| echo Copying $1 to $2 | |
| # Use the install script to create the directory and all required | |
| # parent directories. | |
| if test -d $2 ; then | |
| : | |
| else | |
| echo >config.temp | |
| ${srcdir}/install-sh -c -m 644 config.temp $2/COPIED | |
| fi | |
| # Copy the directory, assuming we have tar. | |
| # FIXME: Should we use B in the second tar? Not all systems support it. | |
| (cd $1; tar -cf - .) | (cd $2; tar -xpf -) | |
| # It is the responsibility of the user to correctly adjust all | |
| # symlinks. If somebody can figure out how to handle them correctly | |
| # here, feel free to add the code. | |
| echo $1 > $2/COPIED | |
| fi | |
| shift; shift | |
| done | |
| # Determine a target-dependent exec_prefix that the installed | |
| # gcc will search in. Keep this list sorted by triplet, with | |
| # the *-*-osname triplets last. | |
| md_exec_prefix= | |
| case "${target}" in | |
| i[[34567]]86-pc-msdosdjgpp*) | |
| md_exec_prefix=/dev/env/DJDIR/bin | |
| ;; | |
| *-*-hpux* | \ | |
| *-*-nto-qnx* | \ | |
| *-*-solaris2*) | |
| md_exec_prefix=/usr/ccs/bin | |
| ;; | |
| esac | |
| extra_arflags_for_target= | |
| extra_nmflags_for_target= | |
| extra_ranlibflags_for_target= | |
| target_makefile_frag=/dev/null | |
| case "${target}" in | |
| spu-*-*) | |
| target_makefile_frag="config/mt-spu" | |
| ;; | |
| mips*-sde-elf*) | |
| target_makefile_frag="config/mt-sde" | |
| ;; | |
| mipsisa*-*-elfoabi*) | |
| target_makefile_frag="config/mt-mips-elfoabi" | |
| ;; | |
| mips*-*-*linux* | mips*-*-gnu*) | |
| target_makefile_frag="config/mt-mips-gnu" | |
| ;; | |
| *-*-linux* | *-*-gnu* | *-*-k*bsd*-gnu | *-*-kopensolaris*-gnu) | |
| target_makefile_frag="config/mt-gnu" | |
| ;; | |
| *-*-aix4.[[3456789]]* | *-*-aix[[56789]].*) | |
| # nm and ar from AIX 4.3 and above require -X32_64 flag to all ar and nm | |
| # commands to handle both 32-bit and 64-bit objects. These flags are | |
| # harmless if we're using GNU nm or ar. | |
| extra_arflags_for_target=" -X32_64" | |
| extra_nmflags_for_target=" -B -X32_64" | |
| ;; | |
| *-*-darwin[[3-9]]*) | |
| # ranlib before Darwin10 requires the -c flag to look at common symbols. | |
| extra_ranlibflags_for_target=" -c" | |
| ;; | |
| esac | |
| alphaieee_frag=/dev/null | |
| case $target in | |
| alpha*-*-*) | |
| # This just makes sure to use the -mieee option to build target libs. | |
| # This should probably be set individually by each library. | |
| alphaieee_frag="config/mt-alphaieee" | |
| ;; | |
| esac | |
| # If --enable-target-optspace always use -Os instead of -O2 to build | |
| # the target libraries, similarly if it is not specified, use -Os | |
| # on selected platforms. | |
| ospace_frag=/dev/null | |
| case "${enable_target_optspace}:${target}" in | |
| yes:*) | |
| ospace_frag="config/mt-ospace" | |
| ;; | |
| :d30v-*) | |
| ospace_frag="config/mt-d30v" | |
| ;; | |
| :m32r-* | :d10v-* | :fr30-*) | |
| ospace_frag="config/mt-ospace" | |
| ;; | |
| no:* | :*) | |
| ;; | |
| *) | |
| echo "*** bad value \"${enable_target_optspace}\" for --enable-target-optspace flag; ignored" 1>&2 | |
| ;; | |
| esac | |
| # Default to using --with-stabs for certain targets. | |
| if test x${with_stabs} = x ; then | |
| case "${target}" in | |
| mips*-*-irix[[56]]*) | |
| ;; | |
| mips*-*-* | alpha*-*-osf*) | |
| with_stabs=yes; | |
| extra_host_args="${extra_host_args} --with-stabs" | |
| ;; | |
| esac | |
| fi | |
| # Some systems (e.g., one of the i386-aix systems the gas testers are | |
| # using) don't handle "\$" correctly, so don't use it here. | |
| tooldir='${exec_prefix}'/${target_noncanonical} | |
| build_tooldir=${tooldir} | |
| # Create a .gdbinit file which runs the one in srcdir | |
| # and tells GDB to look there for source files. | |
| if test -r ${srcdir}/.gdbinit ; then | |
| case ${srcdir} in | |
| .) ;; | |
| *) cat > ./.gdbinit <<EOF | |
| # ${NO_EDIT} | |
| dir ${srcdir} | |
| dir . | |
| source ${srcdir}/.gdbinit | |
| EOF | |
| ;; | |
| esac | |
| fi | |
| # Make sure that the compiler is able to generate an executable. If it | |
| # can't, we are probably in trouble. We don't care whether we can run the | |
| # executable--we might be using a cross compiler--we only care whether it | |
| # can be created. At this point the main configure script has set CC. | |
| we_are_ok=no | |
| echo "int main () { return 0; }" > conftest.c | |
| ${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c | |
| if test $? = 0 ; then | |
| if test -s conftest || test -s conftest.exe ; then | |
| we_are_ok=yes | |
| fi | |
| fi | |
| case $we_are_ok in | |
| no) | |
| echo 1>&2 "*** The command '${CC} -o conftest ${CFLAGS} ${CPPFLAGS} ${LDFLAGS} conftest.c' failed." | |
| echo 1>&2 "*** You must set the environment variable CC to a working compiler." | |
| rm -f conftest* | |
| exit 1 | |
| ;; | |
| esac | |
| rm -f conftest* | |
| # Decide which environment variable is used to find dynamic libraries. | |
| case "${host}" in | |
| *-*-hpux*) RPATH_ENVVAR=SHLIB_PATH ;; | |
| *-*-darwin*) RPATH_ENVVAR=DYLD_LIBRARY_PATH ;; | |
| *-*-mingw* | *-*-cygwin ) RPATH_ENVVAR=PATH ;; | |
| *) RPATH_ENVVAR=LD_LIBRARY_PATH ;; | |
| esac | |
| # On systems where the dynamic library environment variable is PATH, | |
| # gcc/ will put dynamic libraries into a subdirectory to avoid adding | |
| # built executables to PATH. | |
| if test "$RPATH_ENVVAR" = PATH; then | |
| GCC_SHLIB_SUBDIR=/shlib | |
| else | |
| GCC_SHLIB_SUBDIR= | |
| fi | |
| # Record target_configdirs and the configure arguments for target and | |
| # build configuration in Makefile. | |
| target_configdirs=`echo "${target_configdirs}" | sed -e 's/target-//g'` | |
| build_configdirs=`echo "${build_configdirs}" | sed -e 's/build-//g'` | |
| # If we are building libgomp, bootstrap it. | |
| if echo " ${target_configdirs} " | grep " libgomp " > /dev/null 2>&1 ; then | |
| bootstrap_target_libs=${bootstrap_target_libs}target-libgomp, | |
| fi | |
| # Determine whether gdb needs tk/tcl or not. | |
| # Use 'maybe' since enable_gdbtk might be true even if tk isn't available | |
| # and in that case we want gdb to be built without tk. Ugh! | |
| # In fact I believe gdb is the *only* package directly dependent on tk, | |
| # so we should be able to put the 'maybe's in unconditionally and | |
| # leave out the maybe dependencies when enable_gdbtk is false. I'm not | |
| # 100% sure that that's safe though. | |
| gdb_tk="maybe-all-tcl maybe-all-tk maybe-all-itcl maybe-all-libgui" | |
| case "$enable_gdbtk" in | |
| no) | |
| GDB_TK="" ;; | |
| yes) | |
| GDB_TK="${gdb_tk}" ;; | |
| *) | |
| # Only add the dependency on gdbtk when GDBtk is part of the gdb | |
| # distro. Eventually someone will fix this and move Insight, nee | |
| # gdbtk to a separate directory. | |
| if test -d ${srcdir}/gdb/gdbtk ; then | |
| GDB_TK="${gdb_tk}" | |
| else | |
| GDB_TK="" | |
| fi | |
| ;; | |
| esac | |
| CONFIGURE_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-configure-/g` | |
| INSTALL_GDB_TK=`echo ${GDB_TK} | sed s/-all-/-install-/g` | |
| # Strip out unwanted targets. | |
| # While at that, we remove Makefiles if we were started for recursive | |
| # configuration, so that the top-level Makefile reconfigures them, | |
| # like we used to do when configure itself was recursive. | |
| # Loop over modules. We used to use the "$extrasub" feature from Autoconf | |
| # but now we're fixing up the Makefile ourselves with the additional | |
| # commands passed to AC_CONFIG_FILES. Use separate variables | |
| # extrasub-{build,host,target} not because there is any reason to split | |
| # the substitutions up that way, but only to remain below the limit of | |
| # 99 commands in a script, for HP-UX sed. | |
| # Do not nest @if/@endif pairs, because configure will not warn you at all. | |
| AC_ARG_ENABLE([bootstrap], | |
| [AS_HELP_STRING([--enable-bootstrap], | |
| [enable bootstrapping @<:@yes if native build@:>@])],, | |
| enable_bootstrap=default) | |
| # Issue errors and warnings for invalid/strange bootstrap combinations. | |
| case "$configdirs" in | |
| *gcc*) have_compiler=yes ;; | |
| *) have_compiler=no ;; | |
| esac | |
| case "$have_compiler:$host:$target:$enable_bootstrap" in | |
| *:*:*:no) ;; | |
| # Default behavior. Enable bootstrap if we have a compiler | |
| # and we are in a native configuration. | |
| yes:$build:$build:default) | |
| enable_bootstrap=yes ;; | |
| *:*:*:default) | |
| enable_bootstrap=no ;; | |
| # We have a compiler and we are in a native configuration, bootstrap is ok | |
| yes:$build:$build:yes) | |
| ;; | |
| # Other configurations, but we have a compiler. Assume the user knows | |
| # what he's doing. | |
| yes:*:*:yes) | |
| AC_MSG_WARN([trying to bootstrap a cross compiler]) | |
| ;; | |
| # No compiler: if they passed --enable-bootstrap explicitly, fail | |
| no:*:*:yes) | |
| AC_MSG_ERROR([cannot bootstrap without a compiler]) ;; | |
| # Fail if wrong command line | |
| *) | |
| AC_MSG_ERROR([invalid option for --enable-bootstrap]) | |
| ;; | |
| esac | |
| case ",$enable_languages,:$ENABLE_BUILD_WITH_CXX:$enable_bootstrap" in | |
| *,c++,*:yes:yes) ;; | |
| *:yes:yes) | |
| AC_MSG_ERROR([bootstrapping with --enable-build-with-cxx requires c++ in --enable-languages]) | |
| ;; | |
| esac | |
| case "$enable_bootstrap:$ENABLE_GOLD: $configdirs :,$stage1_languages," in | |
| yes:yes:*\ gold\ *:*,c++,*) ;; | |
| yes:yes:*\ gold\ *:*) | |
| AC_MSG_ERROR([in a combined tree, bootstrapping with --enable-gold requires c++ in stage1_languages]) | |
| ;; | |
| esac | |
| # Adjust the toplevel makefile according to whether bootstrap was selected. | |
| case $enable_bootstrap in | |
| yes) | |
| bootstrap_suffix=bootstrap | |
| BUILD_CONFIG=bootstrap-debug | |
| ;; | |
| no) | |
| bootstrap_suffix=no-bootstrap | |
| BUILD_CONFIG= | |
| ;; | |
| esac | |
| AC_MSG_CHECKING(for default BUILD_CONFIG) | |
| AC_ARG_WITH([build-config], | |
| [AS_HELP_STRING([--with-build-config='NAME NAME2...'], | |
| [use config/NAME.mk build configuration])], | |
| [case $with_build_config in | |
| yes) with_build_config= ;; | |
| no) with_build_config= BUILD_CONFIG= ;; | |
| esac]) | |
| if test "x${with_build_config}" != x; then | |
| BUILD_CONFIG=$with_build_config | |
| else | |
| case $BUILD_CONFIG in | |
| bootstrap-debug) | |
| if echo "int f (void) { return 0; }" > conftest.c && | |
| ${CC} -c conftest.c && | |
| mv conftest.o conftest.o.g0 && | |
| ${CC} -c -g conftest.c && | |
| mv conftest.o conftest.o.g && | |
| ${srcdir}/contrib/compare-debug conftest.o.g0 conftest.o.g > /dev/null 2>&1; then | |
| : | |
| else | |
| BUILD_CONFIG= | |
| fi | |
| rm -f conftest.c conftest.o conftest.o.g0 conftest.o.g | |
| ;; | |
| esac | |
| fi | |
| AC_MSG_RESULT($BUILD_CONFIG) | |
| AC_SUBST(BUILD_CONFIG) | |
| extrasub_build= | |
| for module in ${build_configdirs} ; do | |
| if test -z "${no_recursion}" \ | |
| && test -f ${build_subdir}/${module}/Makefile; then | |
| echo 1>&2 "*** removing ${build_subdir}/${module}/Makefile to force reconfigure" | |
| rm -f ${build_subdir}/${module}/Makefile | |
| fi | |
| extrasub_build="$extrasub_build | |
| /^@if build-$module\$/d | |
| /^@endif build-$module\$/d | |
| /^@if build-$module-$bootstrap_suffix\$/d | |
| /^@endif build-$module-$bootstrap_suffix\$/d" | |
| done | |
| extrasub_host= | |
| for module in ${configdirs} ; do | |
| if test -z "${no_recursion}"; then | |
| for file in stage*-${module}/Makefile prev-${module}/Makefile ${module}/Makefile; do | |
| if test -f ${file}; then | |
| echo 1>&2 "*** removing ${file} to force reconfigure" | |
| rm -f ${file} | |
| fi | |
| done | |
| fi | |
| extrasub_host="$extrasub_host | |
| /^@if $module\$/d | |
| /^@endif $module\$/d | |
| /^@if $module-$bootstrap_suffix\$/d | |
| /^@endif $module-$bootstrap_suffix\$/d" | |
| done | |
| extrasub_target= | |
| for module in ${target_configdirs} ; do | |
| if test -z "${no_recursion}" \ | |
| && test -f ${target_subdir}/${module}/Makefile; then | |
| echo 1>&2 "*** removing ${target_subdir}/${module}/Makefile to force reconfigure" | |
| rm -f ${target_subdir}/${module}/Makefile | |
| fi | |
| # We only bootstrap target libraries listed in bootstrap_target_libs. | |
| case $bootstrap_target_libs in | |
| *,target-$module,*) target_bootstrap_suffix=$bootstrap_suffix ;; | |
| *) target_bootstrap_suffix=no-bootstrap ;; | |
| esac | |
| extrasub_target="$extrasub_target | |
| /^@if target-$module\$/d | |
| /^@endif target-$module\$/d | |
| /^@if target-$module-$target_bootstrap_suffix\$/d | |
| /^@endif target-$module-$target_bootstrap_suffix\$/d" | |
| done | |
| # Do the final fixup along with target modules. | |
| extrasub_target="$extrasub_target | |
| /^@if /,/^@endif /d" | |
| # Create the serialization dependencies. This uses a temporary file. | |
| AC_ARG_ENABLE([serial-configure], | |
| [AS_HELP_STRING([[--enable-serial-[{host,target,build}-]configure]], | |
| [force sequential configuration of | |
| sub-packages for the host, target or build | |
| machine, or all sub-packages])]) | |
| case ${enable_serial_configure} in | |
| yes) | |
| enable_serial_build_configure=yes | |
| enable_serial_host_configure=yes | |
| enable_serial_target_configure=yes | |
| ;; | |
| esac | |
| # These force 'configure's to be done one at a time, to avoid problems | |
| # with contention over a shared config.cache. | |
| rm -f serdep.tmp | |
| echo '# serdep.tmp' > serdep.tmp | |
| olditem= | |
| test "x${enable_serial_build_configure}" = xyes && | |
| for item in ${build_configdirs} ; do | |
| case ${olditem} in | |
| "") ;; | |
| *) echo "configure-build-${item}: configure-build-${olditem}" >> serdep.tmp ;; | |
| esac | |
| olditem=${item} | |
| done | |
| olditem= | |
| test "x${enable_serial_host_configure}" = xyes && | |
| for item in ${configdirs} ; do | |
| case ${olditem} in | |
| "") ;; | |
| *) echo "configure-${item}: configure-${olditem}" >> serdep.tmp ;; | |
| esac | |
| olditem=${item} | |
| done | |
| olditem= | |
| test "x${enable_serial_target_configure}" = xyes && | |
| for item in ${target_configdirs} ; do | |
| case ${olditem} in | |
| "") ;; | |
| *) echo "configure-target-${item}: configure-target-${olditem}" >> serdep.tmp ;; | |
| esac | |
| olditem=${item} | |
| done | |
| serialization_dependencies=serdep.tmp | |
| AC_SUBST_FILE(serialization_dependencies) | |
| # Base args. Strip norecursion, cache-file, srcdir, host, build, | |
| # target, nonopt, and variable assignments. These are the ones we | |
| # might not want to pass down to subconfigures. The exception being | |
| # --cache-file=/dev/null, which is used to turn off the use of cache | |
| # files altogether, and which should be passed on to subconfigures. | |
| # Also strip program-prefix, program-suffix, and program-transform-name, | |
| # so that we can pass down a consistent program-transform-name. | |
| baseargs= | |
| tbaseargs= | |
| keep_next=no | |
| skip_next=no | |
| eval "set -- $ac_configure_args" | |
| for ac_arg | |
| do | |
| if test X"$skip_next" = X"yes"; then | |
| skip_next=no | |
| continue | |
| fi | |
| if test X"$keep_next" = X"yes"; then | |
| case $ac_arg in | |
| *\'*) | |
| ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; | |
| esac | |
| baseargs="$baseargs '$ac_arg'" | |
| tbaseargs="$tbaseargs '$ac_arg'" | |
| keep_next=no | |
| continue | |
| fi | |
| # Handle separated arguments. Based on the logic generated by | |
| # autoconf 2.59. | |
| case $ac_arg in | |
| *=* | --config-cache | -C | -disable-* | --disable-* \ | |
| | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ | |
| | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ | |
| | -with-* | --with-* | -without-* | --without-* | --x) | |
| separate_arg=no | |
| ;; | |
| -*) | |
| separate_arg=yes | |
| ;; | |
| *) | |
| separate_arg=no | |
| ;; | |
| esac | |
| skip_targ=no | |
| case $ac_arg in | |
| changequote(,) | |
| --with-* | --without-*) | |
| libopt=`echo "$ac_arg" | sed -e 's,^--[^-_]*[-_],,' -e 's,=.*$,,'` | |
| case $libopt in | |
| *[-_]include) | |
| lib=`echo "$libopt" | sed 's,[-_]include$,,'` | |
| ;; | |
| *[-_]lib) | |
| lib=`echo "$libopt" | sed 's,[-_]lib$,,'` | |
| ;; | |
| *) | |
| lib=$libopt | |
| ;; | |
| esac | |
| changequote([,]) | |
| case $lib in | |
| mpc | mpfr | gmp | ppl | cloog) | |
| # If we're processing --with-$lib, --with-$lib-include or | |
| # --with-$lib-lib, for one of the libs above, and target is | |
| # different from host, don't pass the current argument to any | |
| # target library's configure. | |
| if test x$is_cross_compiler = xyes; then | |
| skip_targ=yes | |
| fi | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| case "$ac_arg" in | |
| --cache-file=/dev/null | \ | |
| -cache-file=/dev/null ) | |
| # Handled here to avoid the test to skip args below. | |
| baseargs="$baseargs '$ac_arg'" | |
| tbaseargs="$tbaseargs '$ac_arg'" | |
| # Assert: $separate_arg should always be no. | |
| keep_next=$separate_arg | |
| ;; | |
| --no*) | |
| continue | |
| ;; | |
| --c* | \ | |
| --sr* | \ | |
| --ho* | \ | |
| --bu* | \ | |
| --t* | \ | |
| --program-* | \ | |
| -cache_file* | \ | |
| -srcdir* | \ | |
| -host* | \ | |
| -build* | \ | |
| -target* | \ | |
| -program-prefix* | \ | |
| -program-suffix* | \ | |
| -program-transform-name* ) | |
| skip_next=$separate_arg | |
| continue | |
| ;; | |
| -*) | |
| # An option. Add it. | |
| case $ac_arg in | |
| *\'*) | |
| ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; | |
| esac | |
| baseargs="$baseargs '$ac_arg'" | |
| if test X"$skip_targ" = Xno; then | |
| tbaseargs="$tbaseargs '$ac_arg'" | |
| fi | |
| keep_next=$separate_arg | |
| ;; | |
| *) | |
| # Either a variable assignment, or a nonopt (triplet). Don't | |
| # pass it down; let the Makefile handle this. | |
| continue | |
| ;; | |
| esac | |
| done | |
| # Remove the initial space we just introduced and, as these will be | |
| # expanded by make, quote '$'. | |
| baseargs=`echo "x$baseargs" | sed -e 's/^x *//' -e 's,\\$,$$,g'` | |
| # Add in --program-transform-name, after --program-prefix and | |
| # --program-suffix have been applied to it. Autoconf has already | |
| # doubled dollar signs and backslashes in program_transform_name; we want | |
| # the backslashes un-doubled, and then the entire thing wrapped in single | |
| # quotes, because this will be expanded first by make and then by the shell. | |
| # Also, because we want to override the logic in subdir configure scripts to | |
| # choose program_transform_name, replace any s,x,x, with s,y,y,. | |
| sed -e "s,\\\\\\\\,\\\\,g; s,','\\\\'',g; s/s,x,x,/s,y,y,/" <<EOF_SED > conftestsed.out | |
| ${program_transform_name} | |
| EOF_SED | |
| gcc_transform_name=`cat conftestsed.out` | |
| rm -f conftestsed.out | |
| baseargs="$baseargs --program-transform-name='${gcc_transform_name}'" | |
| tbaseargs="$tbaseargs --program-transform-name='${gcc_transform_name}'" | |
| if test "$silent" = yes; then | |
| baseargs="$baseargs --silent" | |
| tbaseargs="$tbaseargs --silent" | |
| fi | |
| baseargs="$baseargs --disable-option-checking" | |
| tbaseargs="$tbaseargs --disable-option-checking" | |
| # Record and document user additions to sub configure arguments. | |
| AC_ARG_VAR([build_configargs], | |
| [additional configure arguments for build directories]) | |
| AC_ARG_VAR([host_configargs], | |
| [additional configure arguments for host directories]) | |
| AC_ARG_VAR([target_configargs], | |
| [additional configure arguments for target directories]) | |
| # For the build-side libraries, we just need to pretend we're native, | |
| # and not use the same cache file. Multilibs are neither needed nor | |
| # desired. | |
| build_configargs="$build_configargs --cache-file=../config.cache ${baseargs}" | |
| # For host modules, accept cache file option, or specification as blank. | |
| case "${cache_file}" in | |
| "") # empty | |
| cache_file_option="" ;; | |
| /* | [[A-Za-z]]:[[\\/]]* ) # absolute path | |
| cache_file_option="--cache-file=${cache_file}" ;; | |
| *) # relative path | |
| cache_file_option="--cache-file=../${cache_file}" ;; | |
| esac | |
| # Host dirs don't like to share a cache file either, horribly enough. | |
| # This seems to be due to autoconf 2.5x stupidity. | |
| host_configargs="$host_configargs --cache-file=./config.cache ${extra_host_args} ${baseargs}" | |
| target_configargs="$target_configargs ${tbaseargs}" | |
| # Passing a --with-cross-host argument lets the target libraries know | |
| # whether they are being built with a cross-compiler or being built | |
| # native. However, it would be better to use other mechanisms to make the | |
| # sorts of decisions they want to make on this basis. Please consider | |
| # this option to be deprecated. FIXME. | |
| if test x${is_cross_compiler} = xyes ; then | |
| target_configargs="--with-cross-host=${host_noncanonical} ${target_configargs}" | |
| fi | |
| # Default to --enable-multilib. | |
| if test x${enable_multilib} = x ; then | |
| target_configargs="--enable-multilib ${target_configargs}" | |
| fi | |
| # Pass --with-newlib if appropriate. Note that target_configdirs has | |
| # changed from the earlier setting of with_newlib. | |
| if test x${with_newlib} != xno && echo " ${target_configdirs} " | grep " newlib " > /dev/null 2>&1 && test -d ${srcdir}/newlib ; then | |
| target_configargs="--with-newlib ${target_configargs}" | |
| fi | |
| # Different target subdirs use different values of certain variables | |
| # (notably CXX). Worse, multilibs use *lots* of different values. | |
| # Worse yet, autoconf 2.5x makes some of these 'precious', meaning that | |
| # it doesn't automatically accept command-line overrides of them. | |
| # This means it's not safe for target subdirs to share a cache file, | |
| # which is disgusting, but there you have it. Hopefully this can be | |
| # fixed in future. It's still worthwhile to use a cache file for each | |
| # directory. I think. | |
| # Pass the appropriate --build, --host, --target and --cache-file arguments. | |
| # We need to pass --target, as newer autoconf's requires consistency | |
| # for target_alias and gcc doesn't manage it consistently. | |
| target_configargs="--cache-file=./config.cache ${target_configargs}" | |
| FLAGS_FOR_TARGET= | |
| case " $target_configdirs " in | |
| *" newlib "*) | |
| case " $target_configargs " in | |
| *" --with-newlib "*) | |
| case "$target" in | |
| *-cygwin*) | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup -L$$r/$(TARGET_SUBDIR)/winsup/cygwin -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/include -isystem $$s/winsup/cygwin/include -isystem $$s/winsup/w32api/include' | |
| ;; | |
| esac | |
| # If we're not building GCC, don't discard standard headers. | |
| if test -d ${srcdir}/gcc; then | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -nostdinc' | |
| if test "${build}" != "${host}"; then | |
| # On Canadian crosses, CC_FOR_TARGET will have already been set | |
| # by `configure', so we won't have an opportunity to add -Bgcc/ | |
| # to it. This is right: we don't want to search that directory | |
| # for binaries, but we want the header files in there, so add | |
| # them explicitly. | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -isystem $$r/$(HOST_SUBDIR)/gcc/include -isystem $$r/$(HOST_SUBDIR)/gcc/include-fixed' | |
| # Someone might think of using the pre-installed headers on | |
| # Canadian crosses, in case the installed compiler is not fully | |
| # compatible with the compiler being built. In this case, it | |
| # would be better to flag an error than risking having | |
| # incompatible object files being constructed. We can't | |
| # guarantee that an error will be flagged, but let's hope the | |
| # compiler will do it, when presented with incompatible header | |
| # files. | |
| fi | |
| fi | |
| case "${target}-${is_cross_compiler}" in | |
| i[[3456789]]86-*-linux*-no) | |
| # Here host == target, so we don't need to build gcc, | |
| # so we don't want to discard standard headers. | |
| FLAGS_FOR_TARGET=`echo " $FLAGS_FOR_TARGET " | sed -e 's/ -nostdinc / /'` | |
| ;; | |
| *) | |
| # If we're building newlib, use its generic headers last, but search | |
| # for any libc-related directories first (so make it the last -B | |
| # switch). | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/newlib/ -isystem $$r/$(TARGET_SUBDIR)/newlib/targ-include -isystem $$s/newlib/libc/include' | |
| # If we're building libgloss, find the startup file, simulator library | |
| # and linker script. | |
| case " $target_configdirs " in | |
| *" libgloss "*) | |
| # Look for startup file, simulator library and maybe linker script. | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$$r/$(TARGET_SUBDIR)/libgloss/'"$libgloss_dir" | |
| # Look for libnosys.a in case the target needs it. | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/libgloss/libnosys' | |
| # Most targets have the linker script in the source directory. | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$s/libgloss/'"$libgloss_dir" | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| ;; | |
| esac | |
| case "$target" in | |
| x86_64-*mingw* | *-w64-mingw*) | |
| # MinGW-w64 does not use newlib, nor does it use winsup. It may, | |
| # however, use a symlink named 'mingw' in ${prefix} . | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L${prefix}/${target}/lib -L${prefix}/mingw/lib -isystem ${prefix}/${target}/include -isystem ${prefix}/mingw/include' | |
| ;; | |
| *-mingw*) | |
| # MinGW can't be handled as Cygwin above since it does not use newlib. | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(TARGET_SUBDIR)/winsup/mingw -L$$r/$(TARGET_SUBDIR)/winsup/w32api/lib -isystem $$s/winsup/mingw/include -isystem $$s/winsup/w32api/include' | |
| ;; | |
| esac | |
| # Allow the user to override the flags for | |
| # our build compiler if desired. | |
| if test x"${build}" = x"${host}" ; then | |
| CFLAGS_FOR_BUILD=${CFLAGS_FOR_BUILD-${CFLAGS}} | |
| CXXFLAGS_FOR_BUILD=${CXXFLAGS_FOR_BUILD-${CXXFLAGS}} | |
| LDFLAGS_FOR_BUILD=${LDFLAGS_FOR_BUILD-${LDFLAGS}} | |
| fi | |
| # On Canadian crosses, we'll be searching the right directories for | |
| # the previously-installed cross compiler, so don't bother to add | |
| # flags for directories within the install tree of the compiler | |
| # being built; programs in there won't even run. | |
| if test "${build}" = "${host}" && test -d ${srcdir}/gcc; then | |
| # Search for pre-installed headers if nothing else fits. | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -B$(build_tooldir)/bin/ -B$(build_tooldir)/lib/ -isystem $(build_tooldir)/include -isystem $(build_tooldir)/sys-include' | |
| fi | |
| if test "x${use_gnu_ld}" = x && | |
| echo " ${configdirs} " | grep " ld " > /dev/null ; then | |
| # Arrange for us to find uninstalled linker scripts. | |
| FLAGS_FOR_TARGET=$FLAGS_FOR_TARGET' -L$$r/$(HOST_SUBDIR)/ld' | |
| fi | |
| # Search for other target-specific linker scripts and such. | |
| case "${target}" in | |
| mep*) | |
| FLAGS_FOR_TARGET="$FLAGS_FOR_TARGET -mlibrary" | |
| ;; | |
| esac | |
| # Makefile fragments. | |
| for frag in host_makefile_frag target_makefile_frag alphaieee_frag ospace_frag; | |
| do | |
| eval fragval=\$$frag | |
| if test $fragval != /dev/null; then | |
| eval $frag=${srcdir}/$fragval | |
| fi | |
| done | |
| AC_SUBST_FILE(host_makefile_frag) | |
| AC_SUBST_FILE(target_makefile_frag) | |
| AC_SUBST_FILE(alphaieee_frag) | |
| AC_SUBST_FILE(ospace_frag) | |
| # Miscellanea: directories, flags, etc. | |
| AC_SUBST(RPATH_ENVVAR) | |
| AC_SUBST(GCC_SHLIB_SUBDIR) | |
| AC_SUBST(tooldir) | |
| AC_SUBST(build_tooldir) | |
| AC_SUBST(CONFIGURE_GDB_TK) | |
| AC_SUBST(GDB_TK) | |
| AC_SUBST(INSTALL_GDB_TK) | |
| # Build module lists & subconfigure args. | |
| AC_SUBST(build_configargs) | |
| AC_SUBST(build_configdirs) | |
| # Host module lists & subconfigure args. | |
| AC_SUBST(host_configargs) | |
| AC_SUBST(configdirs) | |
| AC_SUBST(target_configdirs) | |
| # Target module lists & subconfigure args. | |
| AC_SUBST(target_configargs) | |
| # Build tools. | |
| AC_SUBST(AR_FOR_BUILD) | |
| AC_SUBST(AS_FOR_BUILD) | |
| AC_SUBST(CC_FOR_BUILD) | |
| AC_SUBST(CFLAGS_FOR_BUILD) | |
| AC_SUBST(CXXFLAGS_FOR_BUILD) | |
| AC_SUBST(CXX_FOR_BUILD) | |
| AC_SUBST(DLLTOOL_FOR_BUILD) | |
| AC_SUBST(GCJ_FOR_BUILD) | |
| AC_SUBST(GFORTRAN_FOR_BUILD) | |
| AC_SUBST(GOC_FOR_BUILD) | |
| AC_SUBST(LDFLAGS_FOR_BUILD) | |
| AC_SUBST(LD_FOR_BUILD) | |
| AC_SUBST(NM_FOR_BUILD) | |
| AC_SUBST(RANLIB_FOR_BUILD) | |
| AC_SUBST(WINDMC_FOR_BUILD) | |
| AC_SUBST(WINDRES_FOR_BUILD) | |
| # Generate default definitions for YACC, M4, LEX and other programs that run | |
| # on the build machine. These are used if the Makefile can't locate these | |
| # programs in objdir. | |
| MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing | |
| AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y]) | |
| case " $build_configdirs " in | |
| *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;; | |
| esac | |
| AC_CHECK_PROGS([BISON], [bison], [$MISSING bison]) | |
| case " $build_configdirs " in | |
| *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;; | |
| esac | |
| AC_CHECK_PROGS([M4], [gm4 gnum4 m4], [$MISSING m4]) | |
| case " $build_configdirs " in | |
| *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;; | |
| esac | |
| AC_CHECK_PROGS([LEX], [flex lex], [$MISSING flex]) | |
| case " $build_configdirs " in | |
| *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; | |
| *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;; | |
| esac | |
| AC_CHECK_PROGS([FLEX], [flex], [$MISSING flex]) | |
| case " $build_configdirs " in | |
| *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; | |
| esac | |
| AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo]) | |
| case " $build_configdirs " in | |
| *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;; | |
| *) | |
| changequote(,) | |
| # For an installed makeinfo, we require it to be from texinfo 4.7 or | |
| # higher, else we use the "missing" dummy. | |
| if ${MAKEINFO} --version \ | |
| | egrep 'texinfo[^0-9]*(4\.([7-9]|[1-9][0-9])|[5-9]|[1-9][0-9])' >/dev/null 2>&1; then | |
| : | |
| else | |
| MAKEINFO="$MISSING makeinfo" | |
| fi | |
| ;; | |
| changequote([,]) | |
| esac | |
| # FIXME: expect and dejagnu may become build tools? | |
| AC_CHECK_PROGS(EXPECT, expect, expect) | |
| case " $configdirs " in | |
| *" expect "*) | |
| test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect' | |
| ;; | |
| esac | |
| AC_CHECK_PROGS(RUNTEST, runtest, runtest) | |
| case " $configdirs " in | |
| *" dejagnu "*) | |
| test $host = $build && RUNTEST='$$s/$(HOST_SUBDIR)/dejagnu/runtest' | |
| ;; | |
| esac | |
| # Host tools. | |
| NCN_STRICT_CHECK_TOOLS(AR, ar) | |
| NCN_STRICT_CHECK_TOOLS(AS, as) | |
| NCN_STRICT_CHECK_TOOLS(DLLTOOL, dlltool) | |
| NCN_STRICT_CHECK_TOOLS(LD, ld) | |
| NCN_STRICT_CHECK_TOOLS(LIPO, lipo) | |
| NCN_STRICT_CHECK_TOOLS(NM, nm) | |
| NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, true) | |
| NCN_STRICT_CHECK_TOOLS(STRIP, strip, true) | |
| NCN_STRICT_CHECK_TOOLS(WINDRES, windres) | |
| NCN_STRICT_CHECK_TOOLS(WINDMC, windmc) | |
| NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy) | |
| NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump) | |
| AC_SUBST(CC) | |
| AC_SUBST(CXX) | |
| AC_SUBST(CFLAGS) | |
| AC_SUBST(CXXFLAGS) | |
| # Target tools. | |
| AC_ARG_WITH([build-time-tools], | |
| [AS_HELP_STRING([--with-build-time-tools=PATH], | |
| [use given path to find target tools during the build])], | |
| [case x"$withval" in | |
| x/*) ;; | |
| *) | |
| with_build_time_tools= | |
| AC_MSG_WARN([argument to --with-build-time-tools must be an absolute path]) | |
| ;; | |
| esac], | |
| [with_build_time_tools=]) | |
| NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc) | |
| NCN_STRICT_CHECK_TARGET_TOOLS(CXX_FOR_TARGET, c++ g++ cxx gxx) | |
| NCN_STRICT_CHECK_TARGET_TOOLS(GCC_FOR_TARGET, gcc, ${CC_FOR_TARGET}) | |
| NCN_STRICT_CHECK_TARGET_TOOLS(GCJ_FOR_TARGET, gcj) | |
| NCN_STRICT_CHECK_TARGET_TOOLS(GFORTRAN_FOR_TARGET, gfortran) | |
| NCN_STRICT_CHECK_TARGET_TOOLS(GOC_FOR_TARGET, gccgo) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(AR_FOR_TARGET, ar) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(AS_FOR_TARGET, as) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(DLLTOOL_FOR_TARGET, dlltool) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(LD_FOR_TARGET, ld) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(LIPO_FOR_TARGET, lipo) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(NM_FOR_TARGET, nm) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(OBJDUMP_FOR_TARGET, objdump) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(RANLIB_FOR_TARGET, ranlib) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(STRIP_FOR_TARGET, strip) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(WINDRES_FOR_TARGET, windres) | |
| ACX_CHECK_INSTALLED_TARGET_TOOL(WINDMC_FOR_TARGET, windmc) | |
| RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET" | |
| GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar]) | |
| GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new]) | |
| GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/]) | |
| dnl see comments for CXX_FOR_TARGET_FLAG_TO_PASS | |
| GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX, | |
| [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `if test -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags; then $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; else echo -funconfigured-libstdc++-v3 ; fi` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs], | |
| c++) | |
| GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX, | |
| [gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs], | |
| c++) | |
| GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool]) | |
| GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/]) | |
| GCC_TARGET_TOOL(gcj, GCJ_FOR_TARGET, GCJ, | |
| [gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/], java) | |
| GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN, | |
| [gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran) | |
| GCC_TARGET_TOOL(gccgo, GOC_FOR_TARGET, GOC, | |
| [gcc/gccgo -B$$r/$(HOST_SUBDIR)/gcc/], go) | |
| GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new]) | |
| GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO) | |
| GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new]) | |
| GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump]) | |
| GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib]) | |
| GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip-new]) | |
| GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres]) | |
| GCC_TARGET_TOOL(windmc, WINDMC_FOR_TARGET, WINDMC, [binutils/windmc]) | |
| AC_SUBST(FLAGS_FOR_TARGET) | |
| AC_SUBST(RAW_CXX_FOR_TARGET) | |
| # Certain tools may need extra flags. | |
| AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target} | |
| RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target} | |
| NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target} | |
| # When building target libraries, except in a Canadian cross, we use | |
| # the same toolchain as the compiler we just built. | |
| COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)' | |
| COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)' | |
| COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)' | |
| if test $host = $build; then | |
| case " $configdirs " in | |
| *" gcc "*) | |
| COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' | |
| COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' | |
| COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target} | |
| ;; | |
| esac | |
| fi | |
| AC_SUBST(COMPILER_AS_FOR_TARGET) | |
| AC_SUBST(COMPILER_LD_FOR_TARGET) | |
| AC_SUBST(COMPILER_NM_FOR_TARGET) | |
| AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) | |
| AC_ARG_ENABLE(maintainer-mode, | |
| [AS_HELP_STRING([--enable-maintainer-mode], | |
| [enable make rules and dependencies not useful | |
| (and sometimes confusing) to the casual installer])], | |
| USE_MAINTAINER_MODE=$enableval, | |
| USE_MAINTAINER_MODE=no) | |
| AC_MSG_RESULT($USE_MAINTAINER_MODE) | |
| AC_SUBST(MAINTAINER_MODE_TRUE) | |
| AC_SUBST(MAINTAINER_MODE_FALSE) | |
| if test "$USE_MAINTAINER_MODE" = yes; then | |
| MAINTAINER_MODE_TRUE= | |
| MAINTAINER_MODE_FALSE='#' | |
| else | |
| MAINTAINER_MODE_TRUE='#' | |
| MAINTAINER_MODE_FALSE= | |
| fi | |
| MAINT=$MAINTAINER_MODE_TRUE | |
| AC_SUBST(MAINT)dnl | |
| # --------------------- | |
| # GCC bootstrap support | |
| # --------------------- | |
| # Stage specific cflags for build. | |
| stage1_cflags="-g" | |
| case $build in | |
| vax-*-*) | |
| case ${GCC} in | |
| yes) stage1_cflags="-g -Wa,-J" ;; | |
| *) stage1_cflags="-g -J" ;; | |
| esac ;; | |
| esac | |
| # This is aimed to mimic bootstrap with a non-GCC compiler to catch problems. | |
| if test "$GCC" = yes -a "$ENABLE_BUILD_WITH_CXX" != yes; then | |
| saved_CFLAGS="$CFLAGS" | |
| # Pass -fkeep-inline-functions for stage 1 if the GCC version supports it. | |
| CFLAGS="$CFLAGS -fkeep-inline-functions" | |
| AC_MSG_CHECKING([whether -fkeep-inline-functions is supported]) | |
| AC_TRY_COMPILE([ | |
| #if (__GNUC__ < 3) \ | |
| || (__GNUC__ == 3 && (__GNUC_MINOR__ < 3 \ | |
| || (__GNUC_MINOR__ == 3 && __GNUC_PATCHLEVEL__ < 1))) | |
| #error http://gcc.gnu.org/PR29382 | |
| #endif | |
| ],, | |
| [AC_MSG_RESULT([yes]); stage1_cflags="$stage1_cflags -fkeep-inline-functions"], | |
| [AC_MSG_RESULT([no])]) | |
| CFLAGS="$saved_CFLAGS" | |
| fi | |
| AC_SUBST(stage1_cflags) | |
| # Enable --enable-checking in stage1 of the compiler. | |
| AC_ARG_ENABLE(stage1-checking, | |
| [AS_HELP_STRING([[--enable-stage1-checking[=all]]], | |
| [choose additional checking for stage1 of the compiler])], | |
| [stage1_checking=--enable-checking=${enable_stage1_checking}], | |
| [if test "x$enable_checking" = xno || test "x$enable_checking" = x; then | |
| stage1_checking=--enable-checking=yes,types | |
| else | |
| stage1_checking=--enable-checking=$enable_checking,types | |
| fi]) | |
| AC_SUBST(stage1_checking) | |
| # Enable -Werror in bootstrap stage2 and later. | |
| AC_ARG_ENABLE(werror, | |
| [AS_HELP_STRING([--enable-werror], | |
| [enable -Werror in bootstrap stage2 and later])], [], | |
| [if test -d ${srcdir}/gcc && test x"`cat $srcdir/gcc/DEV-PHASE`" = xexperimental; then | |
| enable_werror=yes | |
| else | |
| enable_werror=no | |
| fi]) | |
| case ${enable_werror} in | |
| yes) stage2_werror_flag="--enable-werror-always" ;; | |
| *) stage2_werror_flag="" ;; | |
| esac | |
| AC_SUBST(stage2_werror_flag) | |
| # Specify what files to not compare during bootstrap. | |
| compare_exclusions="gcc/cc*-checksum\$(objext) | gcc/ada/*tools/*" | |
| case "$target" in | |
| hppa*64*-*-hpux*) ;; | |
| hppa*-*-hpux*) compare_exclusions="gcc/cc*-checksum\$(objext) | */libgcc/lib2funcs* | gcc/ada/*tools/*" ;; | |
| esac | |
| case " $configdirs " in | |
| *" ppl "*) compare_exclusions="$compare_exclusions | ppl/src/ppl-config.o" ;; | |
| esac | |
| AC_SUBST(compare_exclusions) | |
| AC_CONFIG_FILES([Makefile], | |
| [sed "$extrasub_build" Makefile | | |
| sed "$extrasub_host" | | |
| sed "$extrasub_target" > mf$$ | |
| mv -f mf$$ Makefile], | |
| [extrasub_build="$extrasub_build" | |
| extrasub_host="$extrasub_host" | |
| extrasub_target="$extrasub_target"]) | |
| AC_OUTPUT |