| # Copyright 2015 The Chromium OS Authors. All rights reserved. |
| # Use of this source code is governed by a BSD-style license that can be |
| # found in the LICENSE file. |
| |
| # for use with servo INA adapter board. If measuring via servo V1 this can just |
| # be ignored. clobber_ok added if user wishes to include servo_loc.xml |
| # additionally. |
| inline = """ |
| <map> |
| <name>adc_mux</name> |
| <doc>valid mux values for DUT's two banks of INA219 off PCA9540 |
| ADCs</doc> |
| <params clobber_ok="" none="0" bank0="4" bank1="5"></params> |
| </map> |
| <control> |
| <name>adc_mux</name> |
| <doc>4 to 1 mux to steer remote i2c i2c_mux:rem to two sets of |
| 16 INA219 ADCs. Note they are only on leg0 and leg1</doc> |
| <params clobber_ok="" interface="2" drv="pca9546" slv="0x70" |
| map="adc_mux"></params> |
| </control> |
| """ |
| |
| inas = [('ina219', 0x40, 'pp3000_always', 3, 1, "loc0", True), |
| ('ina219', 0x41, 'pp2800_ec', 3, 1, "loc0", True), |
| ('ina219', 0x42, 'pplcd', 3.8, 0.02, "loc0", True), |
| ('ina219', 0x43, 'pp1800_lcd', 1.8, 0.02, "loc0", True), |
| ('ina219', 0x44, 'pp3300', 3.8, 0.1, "loc0", True), |
| ('ina219', 0x46, 'pp3300_wifi', 3.3, 0.1, "loc0", True), |
| ('ina219', 0x47, 'pp3300_sensorhub', 3.3, 0.1, "loc0", True), |
| ('ina219', 0x48, 'ppvar_sys_pmic', 3.8, 0.005, "loc0", True), |
| ('ina219', 0x49, 'pp_vbat', 3.8, 0.02, "loc0", True), |
| ('ina219', 0x4A, 'cpu_in', 3.8, 0.01, "loc0", True), |
| ('ina219', 0x4B, 'gpu_in', 3.8, 0.01, "loc0", True), |
| ('ina219', 0x4C, 'soc_in', 3.8, 0.1, "loc0", True), |
| ('ina219', 0x4D, 'pp1800_in', 3.8, 0.1, "loc0", True)] |
