blob: 246d3628485e170f9b92717436c7366dc16612c3 [file] [log] [blame]
<root>
<include>
<name>ec_common.xml</name>
</include>
<!-- ********** Maps ********** -->
<map>
<name>fan_target_rpm</name>
<doc>map for fan_target_rpm</doc>
<params auto="-2" max="-1" off="0"></params>
</map>
<!-- ******** Controls ******** -->
<control>
<name>cpu_temp</name>
<doc>CPU temperature reading in degC. Only works when device is
powered on.</doc>
<params cmd="get" subtype="cpu_temp" interface="10" drv="ec">
</params>
</control>
<control>
<name>fan_actual_rpm</name>
<doc>Actual fan RPM.</doc>
<params cmd="get" subtype="fan_actual_rpm" interface="10"
drv="ec"></params>
</control>
<control>
<name>fan_target_rpm</name>
<doc>Target fan RPM. Set this value to -1 to max out fan speed.
Set to -2 to enable auto fan speed control.</doc>
<params subtype="fan_target_rpm" interface="10" drv="ec"
map="fan_target_rpm"></params>
</control>
<control>
<name>fan_duty</name>
<doc>Current fan duty cycle.</doc>
<params cmd="get" subtype="fan_duty" interface="10" drv="ec">
</params>
</control>
<control>
<name>power_state</name>
<doc>Used to turn the DUT off and on</doc>
<params clobber_ok="" cmd="set" drv="cros_ec_hardrec_power"/>
</control>
<control>
<name>ec_chip</name>
<doc>EC chip name (read-only)</doc>
<params clobber_ok="" cmd="get" subtype="chip" interface="servo"
drv="cros_chip" chip="lm4"/>
</control>
</root>