<root>
  <include>
    <name>servoflex_v2_r0_p50.xml</name>
  </include>
  <include>
    <name>x86_ec_common.xml</name>
  </include>
  <!-- ******** Controls ******** -->
  <!-- Override from definition in servo_v2_r0.xml for prog of MCU -->
  <control>
    <name>power_state</name>
    <doc>Used to turn the DUT off and on</doc>
    <params drv="cros_ec_pd_softrec_power" clobber_ok="" reset_recovery="0.6"
    shutdown_delay="11.0" boot_to_rec_screen_delay="5.0" />
  </control>
  <control>
    <name>fw_wp_state</name>
    <doc>Used to turn fw wp off and on</doc>
    <params clobber_ok="" fw_wp_vref="pp3300"/>
  </control>
  <control>
    <name>dev_mode</name>
    <alias>usbpd_boot_mode</alias>
    <params clobber_ok="" od="PU" map="onoff_i"></params>
  </control>
  <!-- TODO(tbroch) Implement dev mode via EC uart. -->
  <control>
    <name>pch_disable</name>
    <alias>usbpd_reset</alias>
    <params clobber_ok=""></params>
  </control>
  <!-- UART 4, which is re-purposed atop the JTAG interface -->
  <!-- Need to enable jtag vref to get jtag_buf_en buffers on -->
  <control>
    <name>jtag_vref_sel0</name>
    <doc>usbpd_uart_vref_sel0</doc>
    <params clobber_ok=""></params>
  </control>
  <control>
    <name>jtag_vref_sel1</name>
    <doc>usbpd_uart_vref_sel1</doc>
    <params clobber_ok=""></params>
  </control>
  <control>
    <name>uart4_pty</name>
    <alias>raw_usbpd_uart_pty</alias>
    <doc>Psuedo-terminal (pty) thats connnected to USB PD MCU's
     uart console</doc>
    <!-- The servo_{v4,micro}_interface param is just a quick fix -->
    <!-- to get servod working on boards that use this overlay with -->
    <!-- servo v4 and uServo (and unblocking deployments). -->
    <!-- A proper fix will be forthcoming. -->
    <params cmd="get" subtype="pty" interface="1" drv="uart" clobber_ok=""
    servo_v4_interface="2" servo_micro_interface="2"></params>
  </control>
  <!-- EC-3PO console interpreter for USB PD -->
  <control>
    <name>ec3po_usbpd_uart_pty</name>
    <alias>usbpd_uart_pty</alias>
    <doc>USBPD UART console provided via EC-3PO console interpreter.</doc>
    <params cmd="get" subtype="pty" interface="9" drv="uart"></params>
  </control>
  <control>
    <name>usbpd_ec3po_interp_connect</name>
    <doc>State indicating if interpreter is listening to the EC UART.</doc>
    <params interface="9" drv="ec3po_driver" map="onoff" init="on"
    subtype="interp_connect" clobber_ok=""></params>
  </control>
  <control>
    <name>uart4_baudrate</name>
    <alias>usbpd_uart_baudrate</alias>
    <doc>Baudrate for CPU's uart console</doc>
    <params drv="uart" subtype="props" line_prop="baudrate" clobber_ok=""
    interface="1"></params>
  </control>
  <control>
    <name>uart4_parity</name>
    <alias>usbpd_uart_parity</alias>
    <doc>Parity for CPU's uart console</doc>
    <params drv="uart" subtype="props" line_prop="parity" clobber_ok=""
    interface="1" map="uart_parity"></params>
  </control>
  <control>
    <name>uart4_sbits</name>
    <alias>usbpd_uart_sbits</alias>
    <doc>Number of stop bits for CPU's uart console</doc>
    <params drv="uart" subtype="props" line_prop="sbits" clobber_ok=""
    interface="1" map="uart_sbits"></params>
  </control>
  <control>
    <name>uart4_bits</name>
    <alias>usbpd_uart_bits</alias>
    <doc>Number of data bits for CPU's uart console</doc>
    <params drv="uart" subtype="props" line_prop="bits" clobber_ok=""
    interface="1" map="uart_bits"></params>
  </control>
  <!-- USB PD UART Automation Controls -->
  <control>
    <name>usbpd_uart_cmd</name>
    <doc>Set to send command to USBPD UART. Get to obtain the
    matched results with the regular expression of
    usbpd_uart_regexp.</doc>
    <params subtype="uart_cmd" interface="9" drv="uart"
    input_type="str"></params>
  </control>
  <control>
    <name>usbpd_uart_multicmd</name>
    <doc>Set to send multiple commands to USB PD UART.</doc>
    <params subtype="uart_multicmd" interface="9" drv="uart"
    input_type="str" cmd="set"></params>
  </control>
  <control>
    <name>usbpd_uart_regexp</name>
    <doc>List of regular expressions to match the response of
    usbpd_uart_cmd.</doc>
    <params subtype="uart_regexp" interface="9" drv="uart"
    input_type="str"></params>
  </control>
  <control>
    <name>usbpd_uart_timeout</name>
    <doc>Timeout value for a response after issuing a command on
    usbpd_uart_cmd.</doc>
    <params subtype="uart_timeout" interface="9" drv="uart"
    input_type="float"></params>
  </control>
  <control>
    <name>usbpd_uart_capture</name>
    <doc>Enables capture of USB PD console via
    usbpd_uart_stream</doc>
    <params subtype="uart_capture" interface="9" drv="uart"
    map="onoff"></params>
  </control>
  <control>
    <name>usbpd_uart_stream</name>
    <doc>USB PD console stream captured while usbpd_uart_capture is
    set to 'on'</doc>
    <params cmd="get" subtype="uart_stream" interface="9"
    drv="uart"></params>
  </control>
  <!-- Overrides for jtag buffers on servo V2 & flex above -->
  <control>
    <name>jtag_buf_en</name>
    <alias>usbpd_uart_en</alias>
    <doc>Enabled JTAG buffer on servo ... re-purposed to uart4.</doc>
    <params clobber_ok="" init="on"></params>
  </control>
  <control>
    <name>uart4_on_flex_en</name>
    <alias>usbpd_uart_on_flex_en</alias>
    <doc>Enables JTAG buffer on servo flex ... repurposed to uart4.</doc>
    <params interface="2" servo_v3_interface="4" drv="pca95xx" subtype="gpio"
    slv="0x26" offset="3" map="onoff_i" init="on" clobber_ok=""></params>
  </control>
  <control>
    <name>ec_chip</name>
    <doc>EC chip name (read-only)</doc>
    <params clobber_ok="" cmd="get" subtype="chip" interface="servo"
    drv="cros_chip" chip="mec1322"/>
  </control>
  <control>
    <name>usbpd_chip</name>
    <doc>USB PD chip name (read-only)</doc>
    <params clobber_ok="" cmd="get" subtype="chip" interface="servo"
    drv="cros_chip" chip="stm32"/>
  </control>
</root>