# Copyright 2017 The Chromium OS Authors. All rights reserved.
# Use of this source code is governed by a BSD-style license that can be
# found in the LICENSE file.

# for use with servo INA adapter board.  If measuring via servo V1 this can just
# be ignored.  clobber_ok added if user wishes to include servo_loc.xml
# additionally.
inline = """
  <map>
    <name>adc_mux</name>
    <doc>valid mux values for DUT's two banks of INA219 off PCA9540
    ADCs</doc>
    <params clobber_ok="" none="0" bank0="4" bank1="5"></params>
  </map>
  <control>
    <name>adc_mux</name>
    <doc>4 to 1 mux to steer remote i2c i2c_mux:rem to two sets of
    16 INA219 ADCs. Note they are only on leg0 and leg1</doc>
    <params clobber_ok="" interface="2" drv="pca9546" slv="0x70"
    map="adc_mux"></params>
  </control>
"""

inas = [('ina219', 0x40, 'ppvar_vcc',         1.0, 0.002, "loc0", True),
        ('ina219', 0x41, 'ppvat_gt',          1.0, 0.002, "loc0", True),
        ('ina219', 0x42, 'ppvar_sa',          1.0, 0.010, "loc0", True),
        ('ina219', 0x43, 'pp3300_a_emmc',     3.3, 0.020, "loc0", True),
        ('ina219', 0x44, 'pp1800_a_emmc',     1.8, 0.020, "loc0", True),
        ('ina219', 0x45, 'pp3300_dsw',        3.3, 0.010, "loc0", True),
        ('ina219', 0x46, 'pp3300_a',          3.3, 0.010, "loc0", True),
        ('ina219', 0x47, 'pp1100_a_nvme',     1.1, 0.020, "loc0", True),
        ('ina219', 0x48, 'pp1800_a_nvme',     1.8, 0.020, "loc0", True),
        ('ina219', 0x4b, 'pp3300_dx_wlan',    3.3, 0.010, "loc0", True),
        ('ina219', 0x4c, 'ppvar_bl_vcc',      7.7, 0.500, "loc0", True),
        ('ina219', 0x4d, 'pp3300_dx_trackpad',3.3, 0.100, "loc0", True),
        ('ina219', 0x4e, 'pp3300_h1',         3.3, 0.100, "loc0", True),
        ('ina219', 0x4f, 'vbat',              7.7, 0.020, "loc0", True)]