| ps8640-bridge bindings |
| |
| Required properties: |
| - compatible: "parade,ps8640" |
| - reg: first page address of the bridge. |
| - sleep-gpios: OF device-tree gpio specification for PD pin. |
| - reset-gpios: OF device-tree gpio specification for reset pin. |
| - vdd12-supply: OF device-tree regulator specification for 1.2V power. |
| - vdd33-supply: OF device-tree regulator specification for 3.3V power. |
| - ports: The device node can contain video interface port nodes per |
| the video-interfaces bind[1]. For port@0,set the reg = <0> as |
| ps8640 dsi in and port@1,set the reg = <1> as ps8640 eDP out. |
| |
| Optional properties: |
| - mode-sel-gpios: OF device-tree gpio specification for mode-sel pin. |
| [1]: Documentation/devicetree/bindings/media/video-interfaces.txt |
| |
| Example: |
| edp-bridge@18 { |
| compatible = "parade,ps8640"; |
| reg = <0x18>; |
| sleep-gpios = <&pio 116 GPIO_ACTIVE_LOW>; |
| reset-gpios = <&pio 115 GPIO_ACTIVE_LOW>; |
| mode-sel-gpios = <&pio 92 GPIO_ACTIVE_HIGH>; |
| vdd12-supply = <&ps8640_fixed_1v2>; |
| vdd33-supply = <&mt6397_vgp2_reg>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| port@0 { |
| reg = <0>; |
| ps8640_in: endpoint { |
| remote-endpoint = <&dsi0_out>; |
| }; |
| }; |
| port@1 { |
| reg = <1>; |
| ps8640_out: endpoint { |
| remote-endpoint = <&panel_in>; |
| }; |
| }; |
| }; |
| }; |