| /* |
| * Copyright (c) 2016 Fuzhou Rockchip Electronics Co., Ltd |
| * |
| * This file is dual-licensed: you can use it either under the terms |
| * of the GPL or the X11 license, at your option. Note that this dual |
| * licensing only applies to this file, and not this project as a |
| * whole. |
| * |
| * a) This library is free software; you can redistribute it and/or |
| * modify it under the terms of the GNU General Public License as |
| * published by the Free Software Foundation; either version 2 of the |
| * License, or (at your option) any later version. |
| * |
| * This library is distributed in the hope that it will be useful, |
| * but WITHOUT ANY WARRANTY; without even the implied warranty of |
| * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the |
| * GNU General Public License for more details. |
| * |
| * Or, alternatively, |
| * |
| * b) Permission is hereby granted, free of charge, to any person |
| * obtaining a copy of this software and associated documentation |
| * files (the "Software"), to deal in the Software without |
| * restriction, including without limitation the rights to use, |
| * copy, modify, merge, publish, distribute, sublicense, and/or |
| * sell copies of the Software, and to permit persons to whom the |
| * Software is furnished to do so, subject to the following |
| * conditions: |
| * |
| * The above copyright notice and this permission notice shall be |
| * included in all copies or substantial portions of the Software. |
| * |
| * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES |
| * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND |
| * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT |
| * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, |
| * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING |
| * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR |
| * OTHER DEALINGS IN THE SOFTWARE. |
| */ |
| |
| #include <dt-bindings/clock/rk3399-cru.h> |
| #include <dt-bindings/gpio/gpio.h> |
| #include <dt-bindings/interrupt-controller/arm-gic.h> |
| #include <dt-bindings/interrupt-controller/irq.h> |
| #include <dt-bindings/pinctrl/rockchip.h> |
| #include <dt-bindings/power/rk3399-power.h> |
| #include <dt-bindings/thermal/thermal.h> |
| |
| / { |
| compatible = "rockchip,rk3399"; |
| |
| interrupt-parent = <&gic>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| |
| aliases { |
| i2c0 = &i2c0; |
| i2c1 = &i2c1; |
| i2c2 = &i2c2; |
| i2c3 = &i2c3; |
| i2c4 = &i2c4; |
| i2c5 = &i2c5; |
| i2c6 = &i2c6; |
| i2c7 = &i2c7; |
| i2c8 = &i2c8; |
| mmc0 = &sdhci; |
| mmc1 = &sdmmc; |
| mmc2 = &sdio0; |
| serial0 = &uart0; |
| serial1 = &uart1; |
| serial2 = &uart2; |
| serial3 = &uart3; |
| serial4 = &uart4; |
| spi0 = &spi0; |
| spi1 = &spi1; |
| spi2 = &spi2; |
| spi3 = &spi3; |
| spi4 = &spi4; |
| spi5 = &spi5; |
| }; |
| |
| cpus { |
| #address-cells = <2>; |
| #size-cells = <0>; |
| |
| cpu-map { |
| cluster0 { |
| core0 { |
| cpu = <&cpu_l0>; |
| }; |
| core1 { |
| cpu = <&cpu_l1>; |
| }; |
| core2 { |
| cpu = <&cpu_l2>; |
| }; |
| core3 { |
| cpu = <&cpu_l3>; |
| }; |
| }; |
| |
| cluster1 { |
| core0 { |
| cpu = <&cpu_b0>; |
| }; |
| core1 { |
| cpu = <&cpu_b1>; |
| }; |
| }; |
| }; |
| |
| // idle-states { |
| // entry-method = "psci"; |
| // cpu_sleep: cpu-sleep { |
| // compatible = "arm,idle-state"; |
| // local-timer-stop; |
| // arm,psci-suspend-param = <0x0010000>; |
| // entry-latency-us = <120>; |
| // exit-latency-us = <250>; |
| // min-residency-us = <900>; |
| // }; |
| // cluster_sleep: cluster-sleep { |
| // compatible = "arm,idle-state"; |
| // local-timer-stop; |
| // arm,psci-suspend-param = <0x1010000>; |
| // entry-latency-us = <400>; |
| // exit-latency-us = <500>; |
| // min-residency-us = <2000>; |
| // }; |
| // }; |
| |
| cpu_l0: cpu@0 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x0>; |
| enable-method = "psci"; |
| #cooling-cells = <2>; /* min followed by max */ |
| dynamic-power-coefficient = <100>; |
| clocks = <&cru ARMCLKL>; |
| //cpu-idle-states = <&cpu_sleep &cluster_sleep>; |
| }; |
| |
| cpu_l1: cpu@1 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x1>; |
| enable-method = "psci"; |
| clocks = <&cru ARMCLKL>; |
| //cpu-idle-states = <&cpu_sleep &cluster_sleep>; |
| }; |
| |
| cpu_l2: cpu@2 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x2>; |
| enable-method = "psci"; |
| clocks = <&cru ARMCLKL>; |
| //cpu-idle-states = <&cpu_sleep &cluster_sleep>; |
| }; |
| |
| cpu_l3: cpu@3 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a53", "arm,armv8"; |
| reg = <0x0 0x3>; |
| enable-method = "psci"; |
| clocks = <&cru ARMCLKL>; |
| //cpu-idle-states = <&cpu_sleep &cluster_sleep>; |
| }; |
| |
| cpu_b0: cpu@100 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72", "arm,armv8"; |
| reg = <0x0 0x100>; |
| enable-method = "psci"; |
| #cooling-cells = <2>; /* min followed by max */ |
| dynamic-power-coefficient = <436>; |
| clocks = <&cru ARMCLKB>; |
| //cpu-idle-states = <&cpu_sleep &cluster_sleep>; |
| }; |
| |
| cpu_b1: cpu@101 { |
| device_type = "cpu"; |
| compatible = "arm,cortex-a72", "arm,armv8"; |
| reg = <0x0 0x101>; |
| enable-method = "psci"; |
| clocks = <&cru ARMCLKB>; |
| //cpu-idle-states = <&cpu_sleep &cluster_sleep>; |
| }; |
| }; |
| |
| pmu_a53 { |
| compatible = "arm,cortex-a53-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>; |
| }; |
| |
| pmu_a72 { |
| compatible = "arm,cortex-a72-pmu"; |
| interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>; |
| }; |
| |
| psci { |
| compatible = "arm,psci-1.0"; |
| method = "smc"; |
| }; |
| |
| timer { |
| compatible = "arm,armv8-timer"; |
| interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>, |
| <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>, |
| <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>, |
| <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>; |
| arm,no-tick-in-suspend; |
| }; |
| |
| xin24m: xin24m { |
| compatible = "fixed-clock"; |
| clock-frequency = <24000000>; |
| clock-output-names = "xin24m"; |
| #clock-cells = <0>; |
| }; |
| |
| amba { |
| compatible = "arm,amba-bus"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| dmac_bus: dma-controller@ff6d0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x0 0xff6d0000 0x0 0x4000>; |
| interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>; |
| #dma-cells = <1>; |
| clocks = <&cru ACLK_DMAC0_PERILP>; |
| clock-names = "apb_pclk"; |
| }; |
| |
| dmac_peri: dma-controller@ff6e0000 { |
| compatible = "arm,pl330", "arm,primecell"; |
| reg = <0x0 0xff6e0000 0x0 0x4000>; |
| interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>; |
| #dma-cells = <1>; |
| clocks = <&cru ACLK_DMAC1_PERILP>; |
| clock-names = "apb_pclk"; |
| }; |
| }; |
| |
| sdio0: dwmmc@fe310000 { |
| compatible = "rockchip,rk3399-dw-mshc", |
| "rockchip,rk3288-dw-mshc"; |
| reg = <0x0 0xfe310000 0x0 0x4000>; |
| interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH 0>; |
| clock-freq-min-max = <400000 150000000>; |
| clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, |
| <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| fifo-depth = <0x100>; |
| status = "disabled"; |
| }; |
| |
| sdmmc: dwmmc@fe320000 { |
| compatible = "rockchip,rk3399-dw-mshc", |
| "rockchip,rk3288-dw-mshc"; |
| reg = <0x0 0xfe320000 0x0 0x4000>; |
| interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>; |
| clock-freq-min-max = <400000 150000000>; |
| clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, |
| <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; |
| clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; |
| fifo-depth = <0x100>; |
| status = "disabled"; |
| }; |
| |
| sdhci: sdhci@fe330000 { |
| compatible = "rockchip,rk3399-sdhci-5.1", "arasan,sdhci-5.1"; |
| reg = <0x0 0xfe330000 0x0 0x10000>; |
| interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>; |
| arasan,soc-ctl-syscon = <&grf>; |
| assigned-clocks = <&cru SCLK_EMMC>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&cru SCLK_EMMC>, <&cru ACLK_EMMC>; |
| clock-names = "clk_xin", "clk_ahb"; |
| clock-output-names = "emmc_cardclock"; |
| phys = <&emmc_phy>; |
| phy-names = "phy_arasan"; |
| #clock-cells = <0>; |
| power-domains = <&power RK3399_PD_EMMC>; |
| status = "disabled"; |
| }; |
| |
| pcie0: pcie@f8000000 { |
| compatible = "rockchip,rk3399-pcie"; |
| reg = <0x0 0xf8000000 0x0 0x2000000>, |
| <0x0 0xfd000000 0x0 0x1000000>; |
| reg-names = "axi-base", "apb-base"; |
| #address-cells = <3>; |
| #size-cells = <2>; |
| #interrupt-cells = <1>; |
| bus-range = <0x0 0x1>; |
| clocks = <&cru ACLK_PCIE>, <&cru ACLK_PERF_PCIE>, |
| <&cru PCLK_PCIE>, <&cru SCLK_PCIE_PM>; |
| clock-names = "aclk", "aclk-perf", |
| "hclk", "pm"; |
| interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "sys", "legacy", "client"; |
| interrupt-map-mask = <0 0 0 7>; |
| interrupt-map = <0 0 0 1 &pcie0_intc 0>, |
| <0 0 0 2 &pcie0_intc 1>, |
| <0 0 0 3 &pcie0_intc 2>, |
| <0 0 0 4 &pcie0_intc 3>; |
| msi-map = <0x0 &its 0x0 0x1000>; |
| phys = <&pcie_phy>; |
| phy-names = "pcie-phy"; |
| ranges = <0x83000000 0x0 0xfa000000 0x0 0xfa000000 0x0 0x600000 |
| 0x81000000 0x0 0xfa600000 0x0 0xfa600000 0x0 0x100000>; |
| resets = <&cru SRST_PCIE_CORE>, <&cru SRST_PCIE_MGMT>, |
| <&cru SRST_PCIE_MGMT_STICKY>, <&cru SRST_PCIE_PIPE>; |
| reset-names = "core", "mgmt", "mgmt-sticky", "pipe"; |
| status = "disabled"; |
| |
| pcie0_intc: interrupt-controller { |
| interrupt-controller; |
| #address-cells = <0>; |
| #interrupt-cells = <1>; |
| }; |
| }; |
| |
| usb_host0_ehci: usb@fe380000 { |
| compatible = "generic-ehci"; |
| reg = <0x0 0xfe380000 0x0 0x20000>; |
| interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; |
| clock-names = "hclk_host0", "hclk_host0_arb"; |
| phys = <&u2phy0_host>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| usb_host0_ohci: usb@fe3a0000 { |
| compatible = "generic-ohci"; |
| reg = <0x0 0xfe3a0000 0x0 0x20000>; |
| interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST0>, <&cru HCLK_HOST0_ARB>; |
| clock-names = "hclk_host0", "hclk_host0_arb"; |
| status = "disabled"; |
| }; |
| |
| usb_host1_ehci: usb@fe3c0000 { |
| compatible = "generic-ehci"; |
| reg = <0x0 0xfe3c0000 0x0 0x20000>; |
| interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; |
| clock-names = "hclk_host1", "hclk_host1_arb"; |
| phys = <&u2phy1_host>; |
| phy-names = "usb"; |
| status = "disabled"; |
| }; |
| |
| usb_host1_ohci: usb@fe3e0000 { |
| compatible = "generic-ohci"; |
| reg = <0x0 0xfe3e0000 0x0 0x20000>; |
| interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru HCLK_HOST1>, <&cru HCLK_HOST1_ARB>; |
| clock-names = "hclk_host1", "hclk_host1_arb"; |
| status = "disabled"; |
| }; |
| |
| // TODO(briannorris): this node is based on WIP/FROMLIST |
| // bindings; revisit |
| usbdrd3_0: usb@fe800000 { |
| compatible = "rockchip,rk3399-dwc3"; |
| clocks = <&cru SCLK_USB3OTG0_REF>, <&cru SCLK_USB3OTG0_SUSPEND>, |
| <&cru ACLK_USB3OTG0>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, |
| <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; |
| clock-names = "clk_usb3otg0_ref", "clk_usb3otg0_suspend", |
| "aclk_usb3otg0", "aclk_usb3_rksoc_axi_perf", |
| "aclk_usb3", "aclk_usb3_grf"; |
| resets = <&cru SRST_A_USB3_OTG0>; |
| reset-names = "usb3-otg"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| usbdrd_dwc3_0: dwc3 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0xfe800000 0x0 0x100000>; |
| interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>; |
| dr_mode = "otg"; |
| phys = <&tcphy0_usb3>; |
| phy-names = "usb3-phy"; |
| snps,dis_enblslpm_quirk; |
| // TODO: replace with upstream property |
| snps,phyif_utmi_16_bits; |
| snps,dis_u2_freeclk_exists_quirk; |
| snps,dis_del_phy_power_chg_quirk; |
| snps,usb3-slow-suspend-quirk; |
| power-domains = <&power RK3399_PD_USB3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| // TODO(briannorris): this node is based on WIP/FROMLIST |
| // bindings; revisit |
| usbdrd3_1: usb@fe900000 { |
| compatible = "rockchip,rk3399-dwc3"; |
| clocks = <&cru SCLK_USB3OTG1_REF>, <&cru SCLK_USB3OTG1_SUSPEND>, |
| <&cru ACLK_USB3OTG1>, <&cru ACLK_USB3_RKSOC_AXI_PERF>, |
| <&cru ACLK_USB3>, <&cru ACLK_USB3_GRF>; |
| clock-names = "clk_usb3otg1_ref", "clk_usb3otg1_suspend", |
| "aclk_usb3otg1", "aclk_usb3_rksoc_axi_perf", |
| "aclk_usb3", "aclk_usb3_grf"; |
| resets = <&cru SRST_A_USB3_OTG1>; |
| reset-names = "usb3-otg"; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| status = "disabled"; |
| usbdrd_dwc3_1: dwc3 { |
| compatible = "snps,dwc3"; |
| reg = <0x0 0xfe900000 0x0 0x100000>; |
| interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>; |
| dr_mode = "otg"; |
| phys = <&tcphy1_usb3>; |
| phy-names = "usb3-phy"; |
| snps,dis_enblslpm_quirk; |
| // TODO: replace with upstream property |
| snps,phyif_utmi_16_bits; |
| snps,dis_u2_freeclk_exists_quirk; |
| snps,dis_del_phy_power_chg_quirk; |
| snps,usb3-slow-suspend-quirk; |
| power-domains = <&power RK3399_PD_USB3>; |
| status = "disabled"; |
| }; |
| }; |
| |
| gic: interrupt-controller@fee00000 { |
| compatible = "arm,gic-v3"; |
| #interrupt-cells = <4>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| interrupt-controller; |
| |
| reg = <0x0 0xfee00000 0 0x10000>, /* GICD */ |
| <0x0 0xfef00000 0 0xc0000>, /* GICR */ |
| <0x0 0xfff00000 0 0x10000>, /* GICC */ |
| <0x0 0xfff10000 0 0x10000>, /* GICH */ |
| <0x0 0xfff20000 0 0x10000>; /* GICV */ |
| interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>; |
| its: interrupt-controller@fee20000 { |
| compatible = "arm,gic-v3-its"; |
| msi-controller; |
| reg = <0x0 0xfee20000 0x0 0x20000>; |
| }; |
| |
| ppi-partitions { |
| ppi_cluster0: interrupt-partition-0 { |
| affinity = <&cpu_l0 &cpu_l1 &cpu_l2 &cpu_l3>; |
| }; |
| |
| ppi_cluster1: interrupt-partition-1 { |
| affinity = <&cpu_b0 &cpu_b1>; |
| }; |
| }; |
| }; |
| |
| saradc: saradc@ff100000 { |
| compatible = "rockchip,rk3399-saradc"; |
| reg = <0x0 0xff100000 0x0 0x100>; |
| interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH 0>; |
| #io-channel-cells = <1>; |
| clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>; |
| clock-names = "saradc", "apb_pclk"; |
| resets = <&cru SRST_P_SARADC>; |
| reset-names = "saradc-apb"; |
| status = "disabled"; |
| }; |
| |
| i2c1: i2c@ff110000 { |
| compatible = "rockchip,rk3399-i2c"; |
| reg = <0x0 0xff110000 0x0 0x1000>; |
| assigned-clocks = <&cru SCLK_I2C1>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&cru SCLK_I2C1>, <&cru PCLK_I2C1>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c1_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c2: i2c@ff120000 { |
| compatible = "rockchip,rk3399-i2c"; |
| reg = <0x0 0xff120000 0x0 0x1000>; |
| assigned-clocks = <&cru SCLK_I2C2>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&cru SCLK_I2C2>, <&cru PCLK_I2C2>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c2_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c3: i2c@ff130000 { |
| compatible = "rockchip,rk3399-i2c"; |
| reg = <0x0 0xff130000 0x0 0x1000>; |
| assigned-clocks = <&cru SCLK_I2C3>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&cru SCLK_I2C3>, <&cru PCLK_I2C3>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c3_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c5: i2c@ff140000 { |
| compatible = "rockchip,rk3399-i2c"; |
| reg = <0x0 0xff140000 0x0 0x1000>; |
| assigned-clocks = <&cru SCLK_I2C5>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&cru SCLK_I2C5>, <&cru PCLK_I2C5>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c5_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c6: i2c@ff150000 { |
| compatible = "rockchip,rk3399-i2c"; |
| reg = <0x0 0xff150000 0x0 0x1000>; |
| assigned-clocks = <&cru SCLK_I2C6>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&cru SCLK_I2C6>, <&cru PCLK_I2C6>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c6_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c7: i2c@ff160000 { |
| compatible = "rockchip,rk3399-i2c"; |
| reg = <0x0 0xff160000 0x0 0x1000>; |
| assigned-clocks = <&cru SCLK_I2C7>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&cru SCLK_I2C7>, <&cru PCLK_I2C7>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c7_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart0: serial@ff180000 { |
| compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xff180000 0x0 0x100>; |
| clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>; |
| clock-names = "baudclk", "apb_pclk"; |
| interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart0_xfer>; |
| status = "disabled"; |
| }; |
| |
| uart1: serial@ff190000 { |
| compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xff190000 0x0 0x100>; |
| clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>; |
| clock-names = "baudclk", "apb_pclk"; |
| interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart1_xfer>; |
| status = "disabled"; |
| }; |
| |
| uart2: serial@ff1a0000 { |
| compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xff1a0000 0x0 0x100>; |
| clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>; |
| clock-names = "baudclk", "apb_pclk"; |
| interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart2c_xfer>; |
| status = "disabled"; |
| }; |
| |
| uart3: serial@ff1b0000 { |
| compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xff1b0000 0x0 0x100>; |
| clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>; |
| clock-names = "baudclk", "apb_pclk"; |
| interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart3_xfer>; |
| status = "disabled"; |
| }; |
| |
| spi0: spi@ff1c0000 { |
| compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xff1c0000 0x0 0x1000>; |
| clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>; |
| clock-names = "spiclk", "apb_pclk"; |
| interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi1: spi@ff1d0000 { |
| compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xff1d0000 0x0 0x1000>; |
| clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>; |
| clock-names = "spiclk", "apb_pclk"; |
| interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi2: spi@ff1e0000 { |
| compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xff1e0000 0x0 0x1000>; |
| clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>; |
| clock-names = "spiclk", "apb_pclk"; |
| interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi4: spi@ff1f0000 { |
| compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xff1f0000 0x0 0x1000>; |
| clocks = <&cru SCLK_SPI4>, <&cru PCLK_SPI4>; |
| clock-names = "spiclk", "apb_pclk"; |
| interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi4_clk &spi4_tx &spi4_rx &spi4_cs0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| spi5: spi@ff200000 { |
| compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xff200000 0x0 0x1000>; |
| clocks = <&cru SCLK_SPI5>, <&cru PCLK_SPI5>; |
| clock-names = "spiclk", "apb_pclk"; |
| interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi5_clk &spi5_tx &spi5_rx &spi5_cs0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| thermal_zones: thermal-zones { |
| soc_thermal: soc-thermal { |
| polling-delay-passive = <100>; /* milliseconds */ |
| polling-delay = <1000>; /* milliseconds */ |
| sustainable-power = <1000>; /* milliwatts */ |
| |
| thermal-sensors = <&tsadc 0>; |
| |
| trips { |
| threshold: trip-point@0 { |
| temperature = <70000>; /* millicelsius */ |
| hysteresis = <2000>; /* millicelsius */ |
| type = "passive"; |
| }; |
| target: trip-point@1 { |
| temperature = <85000>; /* millicelsius */ |
| hysteresis = <2000>; /* millicelsius */ |
| type = "passive"; |
| }; |
| soc_crit: soc-crit { |
| temperature = <95000>; /* millicelsius */ |
| hysteresis = <2000>; /* millicelsius */ |
| type = "critical"; |
| }; |
| }; |
| |
| cooling-maps { |
| map0 { |
| trip = <&target>; |
| cooling-device = |
| <&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| contribution = <4096>; |
| }; |
| map1 { |
| trip = <&target>; |
| cooling-device = |
| <&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| contribution = <1024>; |
| }; |
| map2 { |
| trip = <&target>; |
| cooling-device = |
| <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; |
| contribution = <4096>; |
| }; |
| }; |
| }; |
| |
| gpu_thermal: gpu-thermal { |
| polling-delay-passive = <100>; /* milliseconds */ |
| polling-delay = <1000>; /* milliseconds */ |
| |
| thermal-sensors = <&tsadc 1>; |
| }; |
| }; |
| |
| tsadc: tsadc@ff260000 { |
| compatible = "rockchip,rk3399-tsadc"; |
| reg = <0x0 0xff260000 0x0 0x100>; |
| rockchip,grf = <&grf>; |
| interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>; |
| clock-names = "tsadc", "apb_pclk"; |
| assigned-clocks = <&cru SCLK_TSADC>; |
| assigned-clock-rates = <750000>; |
| resets = <&cru SRST_TSADC>; |
| reset-names = "tsadc-apb"; |
| pinctrl-names = "init", "default", "sleep"; |
| pinctrl-0 = <&otp_gpio>; |
| pinctrl-1 = <&otp_out>; |
| pinctrl-2 = <&otp_gpio>; |
| #thermal-sensor-cells = <1>; |
| rockchip,hw-tshut-temp = <95000>; |
| status = "disabled"; |
| }; |
| |
| qos_usb_otg0: qos@ffa70000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffa70000 0x0 0x20>; |
| }; |
| |
| qos_usb_otg1: qos@ffa70080 { |
| compatible = "syscon"; |
| reg = <0x0 0xffa70080 0x0 0x20>; |
| }; |
| |
| qos_emmc: qos@ffa58000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffa58000 0x0 0x20>; |
| }; |
| |
| qos_gmac: qos@ffa5c000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffa5c000 0x0 0x20>; |
| }; |
| |
| qos_hdcp: qos@ffa90000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffa90000 0x0 0x20>; |
| }; |
| |
| qos_iep: qos@ffa98000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffa98000 0x0 0x20>; |
| }; |
| |
| qos_isp0_m0: qos@ffaa0000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffaa0000 0x0 0x20>; |
| }; |
| |
| qos_isp0_m1: qos@ffaa0080 { |
| compatible = "syscon"; |
| reg = <0x0 0xffaa0080 0x0 0x20>; |
| }; |
| |
| qos_isp1_m0: qos@ffaa8000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffaa8000 0x0 0x20>; |
| }; |
| |
| qos_isp1_m1: qos@ffaa8080 { |
| compatible = "syscon"; |
| reg = <0x0 0xffaa8080 0x0 0x20>; |
| }; |
| |
| qos_rga_r: qos@ffab0000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffab0000 0x0 0x20>; |
| }; |
| |
| qos_rga_w: qos@ffab0080 { |
| compatible = "syscon"; |
| reg = <0x0 0xffab0080 0x0 0x20>; |
| }; |
| |
| qos_video_m0: qos@ffab8000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffab8000 0x0 0x20>; |
| }; |
| |
| qos_video_m1_r: qos@ffac0000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffac0000 0x0 0x20>; |
| }; |
| |
| qos_video_m1_w: qos@ffac0080 { |
| compatible = "syscon"; |
| reg = <0x0 0xffac0080 0x0 0x20>; |
| }; |
| |
| qos_vop_big_r: qos@ffac8000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffac8000 0x0 0x20>; |
| }; |
| |
| qos_vop_big_w: qos@ffac8080 { |
| compatible = "syscon"; |
| reg = <0x0 0xffac8080 0x0 0x20>; |
| }; |
| |
| qos_vop_little: qos@ffad0000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffad0000 0x0 0x20>; |
| }; |
| |
| qos_gpu: qos@ffae0000 { |
| compatible = "syscon"; |
| reg = <0x0 0xffae0000 0x0 0x20>; |
| }; |
| |
| pmu: power-management@ff310000 { |
| compatible = "rockchip,rk3399-pmu", "syscon", "simple-mfd"; |
| reg = <0x0 0xff310000 0x0 0x1000>; |
| |
| /* |
| * Note: RK3399 supports 6 voltage domains including VD_CORE_L, |
| * VD_CORE_B, VD_CENTER, VD_GPU, VD_LOGIC and VD_PMU. |
| * Some of the power domains are grouped together for every |
| * voltage domain. |
| * The detail contents as below. |
| */ |
| power: power-controller { |
| compatible = "rockchip,rk3399-power-controller"; |
| #power-domain-cells = <1>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| /* These power domains are grouped by VD_CENTER */ |
| pd_iep@RK3399_PD_IEP { |
| reg = <RK3399_PD_IEP>; |
| clocks = <&cru ACLK_IEP>, |
| <&cru HCLK_IEP>; |
| pm_qos = <&qos_iep>; |
| }; |
| pd_rga@RK3399_PD_RGA { |
| reg = <RK3399_PD_RGA>; |
| clocks = <&cru ACLK_RGA>, |
| <&cru HCLK_RGA>; |
| pm_qos = <&qos_rga_r>, |
| <&qos_rga_w>; |
| }; |
| pd_vcodec@RK3399_PD_VCODEC { |
| reg = <RK3399_PD_VCODEC>; |
| clocks = <&cru ACLK_VCODEC>, |
| <&cru HCLK_VCODEC>; |
| pm_qos = <&qos_video_m0>; |
| }; |
| pd_vdu@RK3399_PD_VDU { |
| reg = <RK3399_PD_VDU>; |
| clocks = <&cru ACLK_VDU>, |
| <&cru HCLK_VDU>; |
| pm_qos = <&qos_video_m1_r>, |
| <&qos_video_m1_w>; |
| }; |
| |
| /* These power domains are grouped by VD_GPU */ |
| pd_gpu@RK3399_PD_GPU { |
| reg = <RK3399_PD_GPU>; |
| clocks = <&cru ACLK_GPU>; |
| pm_qos = <&qos_gpu>; |
| }; |
| |
| /* These power domains are grouped by VD_LOGIC */ |
| pd_emmc@RK3399_PD_EMMC { |
| reg = <RK3399_PD_EMMC>; |
| clocks = <&cru ACLK_EMMC>; |
| pm_qos = <&qos_emmc>; |
| }; |
| pd_gmac@RK3399_PD_GMAC { |
| reg = <RK3399_PD_GMAC>; |
| clocks = <&cru ACLK_GMAC>; |
| pm_qos = <&qos_gmac>; |
| }; |
| pd_usb3@RK3399_PD_USB3 { |
| reg = <RK3399_PD_USB3>; |
| clocks = <&cru ACLK_USB3>; |
| pm_qos = <&qos_usb_otg0>, |
| <&qos_usb_otg1>; |
| }; |
| pd_vio@RK3399_PD_VIO { |
| reg = <RK3399_PD_VIO>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pd_hdcp@RK3399_PD_HDCP { |
| reg = <RK3399_PD_HDCP>; |
| clocks = <&cru ACLK_HDCP>, |
| <&cru HCLK_HDCP>, |
| <&cru PCLK_HDCP>; |
| pm_qos = <&qos_hdcp>; |
| }; |
| pd_isp0@RK3399_PD_ISP0 { |
| reg = <RK3399_PD_ISP0>; |
| clocks = <&cru ACLK_ISP0>, |
| <&cru HCLK_ISP0>; |
| pm_qos = <&qos_isp0_m0>, |
| <&qos_isp0_m1>; |
| }; |
| pd_isp1@RK3399_PD_ISP1 { |
| reg = <RK3399_PD_ISP1>; |
| clocks = <&cru ACLK_ISP1>, |
| <&cru HCLK_ISP1>; |
| pm_qos = <&qos_isp1_m0>, |
| <&qos_isp1_m1>; |
| }; |
| pd_tcpc0@RK3399_PD_TCPC0 { |
| reg = <RK3399_PD_TCPD0>; |
| clocks = <&cru SCLK_UPHY0_TCPDCORE>, |
| <&cru SCLK_UPHY0_TCPDPHY_REF>; |
| }; |
| pd_tcpc1@RK3399_PD_TCPC1 { |
| reg = <RK3399_PD_TCPD1>; |
| clocks = <&cru SCLK_UPHY1_TCPDCORE>, |
| <&cru SCLK_UPHY1_TCPDPHY_REF>; |
| }; |
| pd_vo@RK3399_PD_VO { |
| reg = <RK3399_PD_VO>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| pd_vopb@RK3399_PD_VOPB { |
| reg = <RK3399_PD_VOPB>; |
| clocks = <&cru ACLK_VOP0>, |
| <&cru HCLK_VOP0>; |
| pm_qos = <&qos_vop_big_r>, |
| <&qos_vop_big_w>; |
| }; |
| pd_vopl@RK3399_PD_VOPL { |
| reg = <RK3399_PD_VOPL>; |
| clocks = <&cru ACLK_VOP1>, |
| <&cru HCLK_VOP1>; |
| pm_qos = <&qos_vop_little>; |
| }; |
| }; |
| }; |
| }; |
| }; |
| |
| pmugrf: syscon@ff320000 { |
| compatible = "rockchip,rk3399-pmugrf", "syscon"; |
| reg = <0x0 0xff320000 0x0 0x1000>; |
| }; |
| |
| spi3: spi@ff350000 { |
| compatible = "rockchip,rk3399-spi", "rockchip,rk3066-spi"; |
| reg = <0x0 0xff350000 0x0 0x1000>; |
| clocks = <&pmucru SCLK_SPI3_PMU>, <&pmucru PCLK_SPI3_PMU>; |
| clock-names = "spiclk", "apb_pclk"; |
| interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spi3_clk &spi3_tx &spi3_rx &spi3_cs0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| uart4: serial@ff370000 { |
| compatible = "rockchip,rk3399-uart", "snps,dw-apb-uart"; |
| reg = <0x0 0xff370000 0x0 0x100>; |
| clocks = <&pmucru SCLK_UART4_PMU>, <&pmucru PCLK_UART4_PMU>; |
| clock-names = "baudclk", "apb_pclk"; |
| interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>; |
| reg-shift = <2>; |
| reg-io-width = <4>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&uart4_xfer>; |
| status = "disabled"; |
| }; |
| |
| i2c0: i2c@ff3c0000 { |
| compatible = "rockchip,rk3399-i2c"; |
| reg = <0x0 0xff3c0000 0x0 0x1000>; |
| assigned-clocks = <&pmucru SCLK_I2C0_PMU>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&pmucru SCLK_I2C0_PMU>, <&pmucru PCLK_I2C0_PMU>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c0_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c4: i2c@ff3d0000 { |
| compatible = "rockchip,rk3399-i2c"; |
| reg = <0x0 0xff3d0000 0x0 0x1000>; |
| assigned-clocks = <&pmucru SCLK_I2C4_PMU>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&pmucru SCLK_I2C4_PMU>, <&pmucru PCLK_I2C4_PMU>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c4_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| i2c8: i2c@ff3e0000 { |
| compatible = "rockchip,rk3399-i2c"; |
| reg = <0x0 0xff3e0000 0x0 0x1000>; |
| assigned-clocks = <&pmucru SCLK_I2C8_PMU>; |
| assigned-clock-rates = <200000000>; |
| clocks = <&pmucru SCLK_I2C8_PMU>, <&pmucru PCLK_I2C8_PMU>; |
| clock-names = "i2c", "pclk"; |
| interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH 0>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2c8_xfer>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| pwm0: pwm@ff420000 { |
| compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x0 0xff420000 0x0 0x10>; |
| #pwm-cells = <3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm0_pin>; |
| clocks = <&pmucru PCLK_RKPWM_PMU>; |
| clock-names = "pwm"; |
| status = "disabled"; |
| }; |
| |
| pwm1: pwm@ff420010 { |
| compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x0 0xff420010 0x0 0x10>; |
| #pwm-cells = <3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm1_pin>; |
| clocks = <&pmucru PCLK_RKPWM_PMU>; |
| clock-names = "pwm"; |
| status = "disabled"; |
| }; |
| |
| pwm2: pwm@ff420020 { |
| compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x0 0xff420020 0x0 0x10>; |
| #pwm-cells = <3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm2_pin>; |
| clocks = <&pmucru PCLK_RKPWM_PMU>; |
| clock-names = "pwm"; |
| status = "disabled"; |
| }; |
| |
| pwm3: pwm@ff420030 { |
| compatible = "rockchip,rk3399-pwm", "rockchip,rk3288-pwm"; |
| reg = <0x0 0xff420030 0x0 0x10>; |
| #pwm-cells = <3>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&pwm3a_pin>; |
| clocks = <&pmucru PCLK_RKPWM_PMU>; |
| clock-names = "pwm"; |
| status = "disabled"; |
| }; |
| |
| vpu: video-codec@ff650000 { |
| compatible = "rockchip,rk3399-vpu"; |
| reg = <0x0 0xff650000 0x0 0x800>; |
| interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "vepu", "vdpu"; |
| clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; |
| clock-names = "aclk_vcodec", "hclk_vcodec"; |
| power-domains = <&power RK3399_PD_VCODEC>; |
| iommus = <&vpu_mmu>; |
| status = "disabled"; |
| }; |
| |
| vpu_mmu: iommu@ff650800 { |
| compatible = "rockchip,iommu"; |
| reg = <0x0 0xff650800 0x0 0x100>; |
| interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "vpu_mmu"; |
| clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; |
| power-domains = <&power RK3399_PD_VCODEC>; |
| #iommu-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| vdec: video-codec@ff660000 { |
| compatible = "rockchip,rk3399-vdec"; |
| reg = <0x0 0xff660000 0x0 0x400>; |
| interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "vdpu"; |
| clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>, |
| <&cru SCLK_VDU_CA>, <&cru SCLK_VDU_CORE>; |
| clock-names = "aclk_vdu", "hclk_vdu", "sclk_cabac", "sclk_core"; |
| power-domains = <&power RK3399_PD_VDU>; |
| iommus = <&vdec_mmu>; |
| status = "disabled"; |
| }; |
| |
| vdec_mmu: iommu@ff660400 { |
| compatible = "rockchip,iommu"; |
| reg = <0x0 0xff660480 0x0 0x40>, <0x0 0xff6604c0 0x0 0x40>; |
| interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "vdec_mmu"; |
| clocks = <&cru ACLK_VDU>, <&cru HCLK_VDU>; |
| power-domains = <&power RK3399_PD_VDU>; |
| #iommu-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| efuse0: efuse@ff690000 { |
| compatible = "rockchip,rk3399-efuse"; |
| reg = <0x0 0xff690000 0x0 0x80>; |
| #address-cells = <1>; |
| #size-cells = <1>; |
| clocks = <&cru PCLK_EFUSE1024NS>; |
| clock-names = "pclk_efuse"; |
| |
| /* Data cells */ |
| cpul_leakage: cpul-leakage { |
| reg = <0x1a 0x1>; |
| }; |
| cpub_leakage: cpub-leakage { |
| reg = <0x17 0x1>; |
| }; |
| gpu_leakage: gpu-leakage { |
| reg = <0x18 0x1>; |
| }; |
| center_leakage: center-leakage { |
| reg = <0x19 0x1>; |
| }; |
| logic_leakage: logic-leakage { |
| reg = <0x1b 0x1>; |
| }; |
| wafer_info: wafer-info { |
| reg = <0x1c 0x1>; |
| }; |
| }; |
| |
| pmucru: pmu-clock-controller@ff750000 { |
| compatible = "rockchip,rk3399-pmucru"; |
| reg = <0x0 0xff750000 0x0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| assigned-clocks = <&pmucru PLL_PPLL>; |
| assigned-clock-rates = <676000000>; |
| }; |
| |
| cru: clock-controller@ff760000 { |
| compatible = "rockchip,rk3399-cru"; |
| reg = <0x0 0xff760000 0x0 0x1000>; |
| #clock-cells = <1>; |
| #reset-cells = <1>; |
| assigned-clocks = |
| <&cru PLL_GPLL>, <&cru PLL_CPLL>, |
| <&cru PLL_NPLL>, |
| <&cru ACLK_PERIHP>, <&cru HCLK_PERIHP>, |
| <&cru PCLK_PERIHP>, |
| <&cru ACLK_PERILP0>, <&cru HCLK_PERILP0>, |
| <&cru PCLK_PERILP0>, <&cru ACLK_CCI>, |
| <&cru HCLK_PERILP1>, <&cru PCLK_PERILP1>; |
| assigned-clock-rates = |
| <594000000>, <800000000>, |
| <1000000000>, |
| <150000000>, <75000000>, |
| <37500000>, |
| <100000000>, <100000000>, |
| <50000000>, <600000000>, |
| <100000000>, <50000000>; |
| }; |
| |
| grf: syscon@ff770000 { |
| compatible = "rockchip,rk3399-grf", "syscon", "simple-mfd"; |
| reg = <0x0 0xff770000 0x0 0x10000>; |
| |
| #address-cells = <1>; |
| #size-cells = <1>; |
| |
| pcie_phy: pcie-phy { |
| compatible = "rockchip,rk3399-pcie-phy"; |
| assigned-clocks = <&cru SCLK_PCIEPHY_REF>; |
| assigned-clock-parents = <&cru SCLK_PCIEPHY_REF100M>; |
| assigned-clock-rates = <100000000>; |
| clocks = <&cru SCLK_PCIEPHY_REF>; |
| clock-names = "refclk"; |
| resets = <&cru SRST_PCIEPHY>; |
| reset-names = "phy"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| u2phy0: usb2-phy@e450 { |
| compatible = "rockchip,rk3399-usb2phy"; |
| reg = <0xe450 0x10>; |
| clocks = <&cru SCLK_USB2PHY0_REF>; |
| clock-names = "phyclk"; |
| #clock-cells = <0>; |
| clock-output-names = "clk_usbphy0_480m"; |
| status = "disabled"; |
| |
| u2phy0_host: host-port { |
| #phy-cells = <0>; |
| interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "linestate"; |
| status = "disabled"; |
| }; |
| }; |
| |
| u2phy1: usb2-phy@e460 { |
| compatible = "rockchip,rk3399-usb2phy"; |
| reg = <0xe460 0x10>; |
| clocks = <&cru SCLK_USB2PHY1_REF>; |
| clock-names = "phyclk"; |
| #clock-cells = <0>; |
| clock-output-names = "clk_usbphy1_480m"; |
| status = "disabled"; |
| |
| u2phy1_host: host-port { |
| #phy-cells = <0>; |
| interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "linestate"; |
| status = "disabled"; |
| }; |
| }; |
| |
| emmc_phy: phy@f780 { |
| compatible = "rockchip,rk3399-emmc-phy"; |
| reg = <0xf780 0x24>; |
| clocks = <&sdhci>; |
| clock-names = "emmcclk"; |
| #phy-cells = <0>; |
| status = "disabled"; |
| }; |
| }; |
| |
| tcphy0: phy@ff7c0000 { |
| compatible = "rockchip,rk3399-typec-phy"; |
| reg = <0x0 0xff7c0000 0x0 0x40000>; |
| rockchip,grf = <&grf>; |
| clocks = <&cru SCLK_UPHY0_TCPDCORE>, |
| <&cru SCLK_UPHY0_TCPDPHY_REF>; |
| clock-names = "tcpdcore", "tcpdphy-ref"; |
| assigned-clocks = <&cru SCLK_UPHY0_TCPDCORE>; |
| assigned-clock-rates = <50000000>; |
| power-domains = <&power RK3399_PD_TCPD0>; |
| resets = <&cru SRST_UPHY0>, |
| <&cru SRST_UPHY0_PIPE_L00>, |
| <&cru SRST_P_UPHY0_TCPHY>; |
| reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; |
| rockchip,typec-conn-dir = <0xe580 0 16>; |
| rockchip,usb3tousb2-en = <0xe580 3 19>; |
| rockchip,external-psm = <0xe588 14 30>; |
| rockchip,pipe-status = <0xe5c0 0 0>; |
| status = "disabled"; |
| |
| tcphy0_dp: dp-port { |
| #phy-cells = <0>; |
| }; |
| |
| tcphy0_usb3: usb3-port { |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| tcphy1: phy@ff800000 { |
| compatible = "rockchip,rk3399-typec-phy"; |
| reg = <0x0 0xff800000 0x0 0x40000>; |
| rockchip,grf = <&grf>; |
| clocks = <&cru SCLK_UPHY1_TCPDCORE>, |
| <&cru SCLK_UPHY1_TCPDPHY_REF>; |
| clock-names = "tcpdcore", "tcpdphy-ref"; |
| assigned-clocks = <&cru SCLK_UPHY1_TCPDCORE>; |
| assigned-clock-rates = <50000000>; |
| power-domains = <&power RK3399_PD_TCPD1>; |
| resets = <&cru SRST_UPHY1>, |
| <&cru SRST_UPHY1_PIPE_L00>, |
| <&cru SRST_P_UPHY1_TCPHY>; |
| reset-names = "uphy", "uphy-pipe", "uphy-tcphy"; |
| rockchip,typec-conn-dir = <0xe58c 0 16>; |
| rockchip,usb3tousb2-en = <0xe58c 3 19>; |
| rockchip,external-psm = <0xe594 14 30>; |
| rockchip,pipe-status = <0xe5c0 16 16>; |
| status = "disabled"; |
| |
| tcphy1_dp: dp-port { |
| #phy-cells = <0>; |
| }; |
| |
| tcphy1_usb3: usb3-port { |
| #phy-cells = <0>; |
| }; |
| }; |
| |
| watchdog@ff848000 { |
| compatible = "snps,dw-wdt"; |
| reg = <0x0 0xff848000 0x0 0x100>; |
| clocks = <&cru PCLK_WDT>; |
| interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH 0>; |
| }; |
| |
| rktimer: rktimer@ff850000 { |
| compatible = "rockchip,rk3399-timer"; |
| reg = <0x0 0xff850000 0x0 0x1000>; |
| interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru PCLK_TIMER0>, <&cru SCLK_TIMER00>; |
| clock-names = "pclk", "timer"; |
| }; |
| |
| spdif: spdif@ff870000 { |
| compatible = "rockchip,rk3399-spdif"; |
| reg = <0x0 0xff870000 0x0 0x1000>; |
| interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dmac_bus 7>; |
| dma-names = "tx"; |
| clock-names = "mclk", "hclk"; |
| clocks = <&cru SCLK_SPDIF_8CH>, <&cru HCLK_SPDIF>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&spdif_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s0: i2s@ff880000 { |
| compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; |
| reg = <0x0 0xff880000 0x0 0x1000>; |
| rockchip,grf = <&grf>; |
| interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dmac_bus 0>, <&dmac_bus 1>; |
| dma-names = "tx", "rx"; |
| clock-names = "i2s_clk", "i2s_hclk"; |
| clocks = <&cru SCLK_I2S0_8CH>, <&cru HCLK_I2S0_8CH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s0_8ch_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s1: i2s@ff890000 { |
| compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; |
| reg = <0x0 0xff890000 0x0 0x1000>; |
| interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dmac_bus 2>, <&dmac_bus 3>; |
| dma-names = "tx", "rx"; |
| clock-names = "i2s_clk", "i2s_hclk"; |
| clocks = <&cru SCLK_I2S1_8CH>, <&cru HCLK_I2S1_8CH>; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&i2s1_2ch_bus>; |
| status = "disabled"; |
| }; |
| |
| i2s2: i2s@ff8a0000 { |
| compatible = "rockchip,rk3399-i2s", "rockchip,rk3066-i2s"; |
| reg = <0x0 0xff8a0000 0x0 0x1000>; |
| interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH 0>; |
| dmas = <&dmac_bus 4>, <&dmac_bus 5>; |
| dma-names = "tx", "rx"; |
| clock-names = "i2s_clk", "i2s_hclk"; |
| clocks = <&cru SCLK_I2S2_8CH>, <&cru HCLK_I2S2_8CH>; |
| status = "disabled"; |
| }; |
| |
| gpu: gpu@ff9a0000 { |
| compatible = "arm,malit860", |
| "arm,malit86x", |
| "arm,malit8xx", |
| "arm,mali-midgard"; |
| reg = <0x0 0xff9a0000 0x0 0x10000>; |
| interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH 0>, |
| <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "GPU", "JOB", "MMU"; |
| clocks = <&cru ACLK_GPU>; |
| clock-names = "clk_mali"; |
| #cooling-cells = <2>; /* min followed by max */ |
| power-domains = <&power RK3399_PD_GPU>; |
| status = "disabled"; |
| |
| gpu_power_model: power_model { |
| compatible = "arm,mali-simple-power-model"; |
| voltage = <900>; |
| frequency = <500>; |
| static-power = <300>; |
| dynamic-power = <396>; |
| ts = <32000 4700 (-80) 2>; |
| thermal-zone = "gpu-thermal"; |
| }; |
| }; |
| |
| vopl: vop@ff8f0000 { |
| compatible = "rockchip,rk3399-vop-lit"; |
| reg = <0x0 0xff8f0000 0x0 0x3efc>; |
| interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; |
| clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; |
| resets = <&cru SRST_A_VOP1>, <&cru SRST_H_VOP1>, <&cru SRST_D_VOP1>; |
| reset-names = "axi", "ahb", "dclk"; |
| power-domains = <&power RK3399_PD_VOPL>; |
| iommus = <&vopl_mmu>; |
| status = "disabled"; |
| |
| vopl_out: port { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| vopl_out_edp: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&edp_in_vopl>; |
| }; |
| }; |
| }; |
| |
| vopl_mmu: iommu@ff8f3f00 { |
| compatible = "rockchip,iommu"; |
| reg = <0x0 0xff8f3f00 0x0 0x100>; |
| interrupts = <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "vopl_mmu"; |
| clocks = <&cru ACLK_VOP1>, <&cru DCLK_VOP1>, <&cru HCLK_VOP1>; |
| power-domains = <&power RK3399_PD_VOPL>; |
| #iommu-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| vopb: vop@ff900000 { |
| compatible = "rockchip,rk3399-vop-big"; |
| reg = <0x0 0xff900000 0x0 0x3efc>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; |
| clock-names = "aclk_vop", "dclk_vop", "hclk_vop"; |
| resets = <&cru SRST_A_VOP0>, <&cru SRST_H_VOP0>, <&cru SRST_D_VOP0>; |
| reset-names = "axi", "ahb", "dclk"; |
| power-domains = <&power RK3399_PD_VOPB>; |
| iommus = <&vopb_mmu>; |
| status = "disabled"; |
| |
| vopb_out: port { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| vopb_out_edp: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&edp_in_vopb>; |
| }; |
| }; |
| }; |
| |
| vopb_mmu: iommu@ff903f00 { |
| compatible = "rockchip,iommu"; |
| reg = <0x0 0xff903f00 0x0 0x100>; |
| interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>; |
| interrupt-names = "vopb_mmu"; |
| clocks = <&cru ACLK_VOP0>, <&cru DCLK_VOP0>, <&cru HCLK_VOP0>; |
| power-domains = <&power RK3399_PD_VOPB>; |
| #iommu-cells = <0>; |
| status = "disabled"; |
| }; |
| |
| edp: edp@ff970000 { |
| compatible = "rockchip,rk3399-edp"; |
| reg = <0x0 0xff970000 0x0 0x8000>; |
| interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>; |
| clocks = <&cru PCLK_EDP>, <&cru PCLK_EDP_CTRL>, <&cru PCLK_VIO_GRF>; |
| clock-names = "dp", "pclk", "grf"; |
| resets = <&cru SRST_P_EDP_CTRL>; |
| reset-names = "dp"; |
| rockchip,grf = <&grf>; |
| status = "disabled"; |
| pinctrl-names = "default"; |
| pinctrl-0 = <&edp_hpd>; |
| |
| ports { |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| edp_in: port@0 { |
| reg = <0>; |
| #address-cells = <1>; |
| #size-cells = <0>; |
| |
| edp_in_vopb: endpoint@0 { |
| reg = <0>; |
| remote-endpoint = <&vopb_out_edp>; |
| }; |
| |
| edp_in_vopl: endpoint@1 { |
| reg = <1>; |
| remote-endpoint = <&vopl_out_edp>; |
| }; |
| }; |
| }; |
| }; |
| |
| display_subsystem: display-subsystem { |
| compatible = "rockchip,display-subsystem"; |
| ports = <&vopl_out>, <&vopb_out>; |
| status = "disabled"; |
| }; |
| |
| pinctrl: pinctrl { |
| compatible = "rockchip,rk3399-pinctrl"; |
| rockchip,grf = <&grf>; |
| rockchip,pmu = <&pmugrf>; |
| #address-cells = <2>; |
| #size-cells = <2>; |
| ranges; |
| |
| gpio0: gpio0@ff720000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xff720000 0x0 0x100>; |
| clocks = <&pmucru PCLK_GPIO0_PMU>; |
| interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>; |
| |
| gpio-controller; |
| #gpio-cells = <0x2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <0x2>; |
| }; |
| |
| gpio1: gpio1@ff730000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xff730000 0x0 0x100>; |
| clocks = <&pmucru PCLK_GPIO1_PMU>; |
| interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH 0>; |
| |
| gpio-controller; |
| #gpio-cells = <0x2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <0x2>; |
| }; |
| |
| gpio2: gpio2@ff780000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xff780000 0x0 0x100>; |
| clocks = <&cru PCLK_GPIO2>; |
| interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH 0>; |
| |
| gpio-controller; |
| #gpio-cells = <0x2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <0x2>; |
| }; |
| |
| gpio3: gpio3@ff788000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xff788000 0x0 0x100>; |
| clocks = <&cru PCLK_GPIO3>; |
| interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH 0>; |
| |
| gpio-controller; |
| #gpio-cells = <0x2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <0x2>; |
| }; |
| |
| gpio4: gpio4@ff790000 { |
| compatible = "rockchip,gpio-bank"; |
| reg = <0x0 0xff790000 0x0 0x100>; |
| clocks = <&cru PCLK_GPIO4>; |
| interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH 0>; |
| |
| gpio-controller; |
| #gpio-cells = <0x2>; |
| |
| interrupt-controller; |
| #interrupt-cells = <0x2>; |
| }; |
| |
| pcfg_pull_up: pcfg-pull-up { |
| bias-pull-up; |
| }; |
| |
| pcfg_pull_down: pcfg-pull-down { |
| bias-pull-down; |
| }; |
| |
| pcfg_pull_none: pcfg-pull-none { |
| bias-disable; |
| }; |
| |
| pcfg_pull_none_12ma: pcfg-pull-none-12ma { |
| bias-disable; |
| drive-strength = <12>; |
| }; |
| |
| pcfg_pull_up_8ma: pcfg-pull-up-8ma { |
| bias-pull-up; |
| drive-strength = <8>; |
| }; |
| |
| pcfg_pull_down_4ma: pcfg-pull-down-4ma { |
| bias-pull-down; |
| drive-strength = <4>; |
| }; |
| |
| pcfg_pull_up_2ma: pcfg-pull-up-2ma { |
| bias-pull-up; |
| drive-strength = <2>; |
| }; |
| |
| pcfg_pull_down_12ma: pcfg-pull-down-12ma { |
| bias-pull-down; |
| drive-strength = <12>; |
| }; |
| |
| pcfg_pull_none_13ma: pcfg-pull-none-13ma { |
| bias-disable; |
| drive-strength = <13>; |
| }; |
| |
| clock { |
| clk_32k: clk-32k { |
| rockchip,pins = <0 0 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c0 { |
| i2c0_xfer: i2c0-xfer { |
| rockchip,pins = |
| <1 15 RK_FUNC_2 &pcfg_pull_none>, |
| <1 16 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c1 { |
| i2c1_xfer: i2c1-xfer { |
| rockchip,pins = |
| <4 2 RK_FUNC_1 &pcfg_pull_none>, |
| <4 1 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c2 { |
| i2c2_xfer: i2c2-xfer { |
| rockchip,pins = |
| <2 1 RK_FUNC_2 &pcfg_pull_none_12ma>, |
| <2 0 RK_FUNC_2 &pcfg_pull_none_12ma>; |
| }; |
| }; |
| |
| i2c3 { |
| i2c3_xfer: i2c3-xfer { |
| rockchip,pins = |
| <4 17 RK_FUNC_1 &pcfg_pull_none>, |
| <4 16 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c4 { |
| i2c4_xfer: i2c4-xfer { |
| rockchip,pins = |
| <1 12 RK_FUNC_1 &pcfg_pull_none>, |
| <1 11 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c5 { |
| i2c5_xfer: i2c5-xfer { |
| rockchip,pins = |
| <3 11 RK_FUNC_2 &pcfg_pull_none>, |
| <3 10 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c6 { |
| i2c6_xfer: i2c6-xfer { |
| rockchip,pins = |
| <2 10 RK_FUNC_2 &pcfg_pull_none>, |
| <2 9 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c7 { |
| i2c7_xfer: i2c7-xfer { |
| rockchip,pins = |
| <2 8 RK_FUNC_2 &pcfg_pull_none>, |
| <2 7 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2c8 { |
| i2c8_xfer: i2c8-xfer { |
| rockchip,pins = |
| <1 21 RK_FUNC_1 &pcfg_pull_none>, |
| <1 20 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2s0 { |
| i2s0_8ch_bus: i2s0-8ch-bus { |
| rockchip,pins = |
| <3 24 RK_FUNC_1 &pcfg_pull_none>, |
| <3 25 RK_FUNC_1 &pcfg_pull_none>, |
| <3 26 RK_FUNC_1 &pcfg_pull_none>, |
| <3 27 RK_FUNC_1 &pcfg_pull_none>, |
| <3 28 RK_FUNC_1 &pcfg_pull_none>, |
| <3 29 RK_FUNC_1 &pcfg_pull_none>, |
| <3 30 RK_FUNC_1 &pcfg_pull_none>, |
| <3 31 RK_FUNC_1 &pcfg_pull_none>, |
| <4 0 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| i2s1 { |
| i2s1_2ch_bus: i2s1-2ch-bus { |
| rockchip,pins = |
| <4 3 RK_FUNC_1 &pcfg_pull_none>, |
| <4 4 RK_FUNC_1 &pcfg_pull_none>, |
| <4 5 RK_FUNC_1 &pcfg_pull_none>, |
| <4 6 RK_FUNC_1 &pcfg_pull_none>, |
| <4 7 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| sleep { |
| ap_pwroff: ap-pwroff { |
| rockchip,pins = <1 5 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| ddrio_pwroff: ddrio-pwroff { |
| rockchip,pins = <0 1 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| spdif { |
| spdif_bus: spdif-bus { |
| rockchip,pins = |
| <4 21 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| spi0 { |
| spi0_clk: spi0-clk { |
| rockchip,pins = |
| <3 6 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi0_cs0: spi0-cs0 { |
| rockchip,pins = |
| <3 7 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi0_cs1: spi0-cs1 { |
| rockchip,pins = |
| <3 8 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi0_tx: spi0-tx { |
| rockchip,pins = |
| <3 5 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi0_rx: spi0-rx { |
| rockchip,pins = |
| <3 4 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| }; |
| |
| spi1 { |
| spi1_clk: spi1-clk { |
| rockchip,pins = |
| <1 9 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi1_cs0: spi1-cs0 { |
| rockchip,pins = |
| <1 10 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi1_rx: spi1-rx { |
| rockchip,pins = |
| <1 7 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi1_tx: spi1-tx { |
| rockchip,pins = |
| <1 8 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| }; |
| |
| spi2 { |
| spi2_clk: spi2-clk { |
| rockchip,pins = |
| <2 11 RK_FUNC_1 &pcfg_pull_up>; |
| }; |
| spi2_cs0: spi2-cs0 { |
| rockchip,pins = |
| <2 12 RK_FUNC_1 &pcfg_pull_up>; |
| }; |
| spi2_rx: spi2-rx { |
| rockchip,pins = |
| <2 9 RK_FUNC_1 &pcfg_pull_up>; |
| }; |
| spi2_tx: spi2-tx { |
| rockchip,pins = |
| <2 10 RK_FUNC_1 &pcfg_pull_up>; |
| }; |
| }; |
| |
| spi3 { |
| spi3_clk: spi3-clk { |
| rockchip,pins = |
| <1 17 RK_FUNC_1 &pcfg_pull_up>; |
| }; |
| spi3_cs0: spi3-cs0 { |
| rockchip,pins = |
| <1 18 RK_FUNC_1 &pcfg_pull_up>; |
| }; |
| spi3_rx: spi3-rx { |
| rockchip,pins = |
| <1 15 RK_FUNC_1 &pcfg_pull_up>; |
| }; |
| spi3_tx: spi3-tx { |
| rockchip,pins = |
| <1 16 RK_FUNC_1 &pcfg_pull_up>; |
| }; |
| }; |
| |
| spi4 { |
| spi4_clk: spi4-clk { |
| rockchip,pins = |
| <3 2 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi4_cs0: spi4-cs0 { |
| rockchip,pins = |
| <3 3 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi4_rx: spi4-rx { |
| rockchip,pins = |
| <3 0 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi4_tx: spi4-tx { |
| rockchip,pins = |
| <3 1 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| }; |
| |
| spi5 { |
| spi5_clk: spi5-clk { |
| rockchip,pins = |
| <2 22 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi5_cs0: spi5-cs0 { |
| rockchip,pins = |
| <2 23 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi5_rx: spi5-rx { |
| rockchip,pins = |
| <2 20 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| spi5_tx: spi5-tx { |
| rockchip,pins = |
| <2 21 RK_FUNC_2 &pcfg_pull_up>; |
| }; |
| }; |
| |
| tsadc { |
| otp_gpio: otp-gpio { |
| rockchip,pins = <1 6 RK_FUNC_GPIO &pcfg_pull_none>; |
| }; |
| |
| otp_out: otp-out { |
| rockchip,pins = <1 6 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart0 { |
| uart0_xfer: uart0-xfer { |
| rockchip,pins = |
| <2 16 RK_FUNC_1 &pcfg_pull_up>, |
| <2 17 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart0_cts: uart0-cts { |
| rockchip,pins = |
| <2 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| uart0_rts: uart0-rts { |
| rockchip,pins = |
| <2 19 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart1 { |
| uart1_xfer: uart1-xfer { |
| rockchip,pins = |
| <3 12 RK_FUNC_2 &pcfg_pull_up>, |
| <3 13 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart2a { |
| uart2a_xfer: uart2a-xfer { |
| rockchip,pins = |
| <4 8 RK_FUNC_2 &pcfg_pull_up>, |
| <4 9 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart2b { |
| uart2b_xfer: uart2b-xfer { |
| rockchip,pins = |
| <4 16 RK_FUNC_2 &pcfg_pull_up>, |
| <4 17 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart2c { |
| uart2c_xfer: uart2c-xfer { |
| rockchip,pins = |
| <4 19 RK_FUNC_1 &pcfg_pull_up>, |
| <4 20 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart3 { |
| uart3_xfer: uart3-xfer { |
| rockchip,pins = |
| <3 14 RK_FUNC_2 &pcfg_pull_up>, |
| <3 15 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| uart3_cts: uart3-cts { |
| rockchip,pins = |
| <3 18 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| uart3_rts: uart3-rts { |
| rockchip,pins = |
| <3 19 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uart4 { |
| uart4_xfer: uart4-xfer { |
| rockchip,pins = |
| <1 7 RK_FUNC_1 &pcfg_pull_up>, |
| <1 8 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| uarthdcp { |
| uarthdcp_xfer: uarthdcp-xfer { |
| rockchip,pins = |
| <4 21 RK_FUNC_2 &pcfg_pull_up>, |
| <4 22 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm0 { |
| pwm0_pin: pwm0-pin { |
| rockchip,pins = |
| <4 18 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| vop0_pwm_pin: vop0-pwm-pin { |
| rockchip,pins = |
| <4 18 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm1 { |
| pwm1_pin: pwm1-pin { |
| rockchip,pins = |
| <4 22 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| |
| vop1_pwm_pin: vop1-pwm-pin { |
| rockchip,pins = |
| <4 18 RK_FUNC_3 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm2 { |
| pwm2_pin: pwm2-pin { |
| rockchip,pins = |
| <1 19 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm3a { |
| pwm3a_pin: pwm3a-pin { |
| rockchip,pins = |
| <0 6 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pwm3b { |
| pwm3b_pin: pwm3b-pin { |
| rockchip,pins = |
| <1 14 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| edp { |
| edp_hpd: edp-hpd { |
| rockchip,pins = |
| <4 23 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| }; |
| |
| pcie { |
| pcie_clkreqn: pci-clkreqn { |
| rockchip,pins = |
| <2 26 RK_FUNC_2 &pcfg_pull_none>; |
| }; |
| |
| pcie_clkreqnb: pci-clkreqnb { |
| rockchip,pins = |
| <4 24 RK_FUNC_1 &pcfg_pull_none>; |
| }; |
| }; |
| |
| }; |
| }; |
