| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * FB driver for the ILI9163 LCD Controller | |
| * | |
| * Copyright (C) 2015 Kozhevnikov Anatoly | |
| * | |
| * Based on ili9325.c by Noralf Tronnes and | |
| * .S.U.M.O.T.O.Y. by Max MC Costa (https://github.com/sumotoy/TFT_ILI9163C). | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <linux/gpio.h> | |
| #include <linux/delay.h> | |
| #include <video/mipi_display.h> | |
| #include "fbtft.h" | |
| #define DRVNAME "fb_ili9163" | |
| #define WIDTH 128 | |
| #define HEIGHT 128 | |
| #define BPP 16 | |
| #define FPS 30 | |
| #ifdef GAMMA_ADJ | |
| #define GAMMA_LEN 15 | |
| #define GAMMA_NUM 1 | |
| #define DEFAULT_GAMMA "36 29 12 22 1C 15 42 B7 2F 13 12 0A 11 0B 06\n" | |
| #endif | |
| /* ILI9163C commands */ | |
| #define CMD_FRMCTR1 0xB1 /* Frame Rate Control */ | |
| /* (In normal mode/Full colors) */ | |
| #define CMD_FRMCTR2 0xB2 /* Frame Rate Control (In Idle mode/8-colors) */ | |
| #define CMD_FRMCTR3 0xB3 /* Frame Rate Control */ | |
| /* (In Partial mode/full colors) */ | |
| #define CMD_DINVCTR 0xB4 /* Display Inversion Control */ | |
| #define CMD_RGBBLK 0xB5 /* RGB Interface Blanking Porch setting */ | |
| #define CMD_DFUNCTR 0xB6 /* Display Function set 5 */ | |
| #define CMD_SDRVDIR 0xB7 /* Source Driver Direction Control */ | |
| #define CMD_GDRVDIR 0xB8 /* Gate Driver Direction Control */ | |
| #define CMD_PWCTR1 0xC0 /* Power_Control1 */ | |
| #define CMD_PWCTR2 0xC1 /* Power_Control2 */ | |
| #define CMD_PWCTR3 0xC2 /* Power_Control3 */ | |
| #define CMD_PWCTR4 0xC3 /* Power_Control4 */ | |
| #define CMD_PWCTR5 0xC4 /* Power_Control5 */ | |
| #define CMD_VCOMCTR1 0xC5 /* VCOM_Control 1 */ | |
| #define CMD_VCOMCTR2 0xC6 /* VCOM_Control 2 */ | |
| #define CMD_VCOMOFFS 0xC7 /* VCOM Offset Control */ | |
| #define CMD_PGAMMAC 0xE0 /* Positive Gamma Correction Setting */ | |
| #define CMD_NGAMMAC 0xE1 /* Negative Gamma Correction Setting */ | |
| #define CMD_GAMRSEL 0xF2 /* GAM_R_SEL */ | |
| /* | |
| * This display: | |
| * http://www.ebay.com/itm/Replace-Nokia-5110-LCD-1-44-Red-Serial-128X128-SPI- | |
| * Color-TFT-LCD-Display-Module-/271422122271 | |
| * This particular display has a design error! The controller has 3 pins to | |
| * configure to constrain the memory and resolution to a fixed dimension (in | |
| * that case 128x128) but they leaved those pins configured for 128x160 so | |
| * there was several pixel memory addressing problems. | |
| * I solved by setup several parameters that dinamically fix the resolution as | |
| * needit so below the parameters for this display. If you have a strain or a | |
| * correct display (can happen with chinese) you can copy those parameters and | |
| * create setup for different displays. | |
| */ | |
| #ifdef RED | |
| #define __OFFSET 32 /*see note 2 - this is the red version */ | |
| #else | |
| #define __OFFSET 0 /*see note 2 - this is the black version */ | |
| #endif | |
| static int init_display(struct fbtft_par *par) | |
| { | |
| par->fbtftops.reset(par); | |
| if (par->gpio.cs != -1) | |
| gpio_set_value(par->gpio.cs, 0); /* Activate chip */ | |
| write_reg(par, MIPI_DCS_SOFT_RESET); /* software reset */ | |
| mdelay(500); | |
| write_reg(par, MIPI_DCS_EXIT_SLEEP_MODE); /* exit sleep */ | |
| mdelay(5); | |
| write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT); | |
| /* default gamma curve 3 */ | |
| write_reg(par, MIPI_DCS_SET_GAMMA_CURVE, 0x02); | |
| #ifdef GAMMA_ADJ | |
| write_reg(par, CMD_GAMRSEL, 0x01); /* Enable Gamma adj */ | |
| #endif | |
| write_reg(par, MIPI_DCS_ENTER_NORMAL_MODE); | |
| write_reg(par, CMD_DFUNCTR, 0xff, 0x06); | |
| /* Frame Rate Control (In normal mode/Full colors) */ | |
| write_reg(par, CMD_FRMCTR1, 0x08, 0x02); | |
| write_reg(par, CMD_DINVCTR, 0x07); /* display inversion */ | |
| /* Set VRH1[4:0] & VC[2:0] for VCI1 & GVDD */ | |
| write_reg(par, CMD_PWCTR1, 0x0A, 0x02); | |
| /* Set BT[2:0] for AVDD & VCL & VGH & VGL */ | |
| write_reg(par, CMD_PWCTR2, 0x02); | |
| /* Set VMH[6:0] & VML[6:0] for VOMH & VCOML */ | |
| write_reg(par, CMD_VCOMCTR1, 0x50, 0x63); | |
| write_reg(par, CMD_VCOMOFFS, 0); | |
| write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, 0, 0, 0, WIDTH); | |
| write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, 0, 0, 0, HEIGHT); | |
| write_reg(par, MIPI_DCS_SET_DISPLAY_ON); /* display ON */ | |
| write_reg(par, MIPI_DCS_WRITE_MEMORY_START); /* Memory Write */ | |
| return 0; | |
| } | |
| static void set_addr_win(struct fbtft_par *par, int xs, int ys, | |
| int xe, int ye) | |
| { | |
| switch (par->info->var.rotate) { | |
| case 0: | |
| write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, | |
| xs >> 8, xs & 0xff, xe >> 8, xe & 0xff); | |
| write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, | |
| (ys + __OFFSET) >> 8, (ys + __OFFSET) & 0xff, | |
| (ye + __OFFSET) >> 8, (ye + __OFFSET) & 0xff); | |
| break; | |
| case 90: | |
| write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, | |
| (xs + __OFFSET) >> 8, (xs + __OFFSET) & 0xff, | |
| (xe + __OFFSET) >> 8, (xe + __OFFSET) & 0xff); | |
| write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, | |
| ys >> 8, ys & 0xff, ye >> 8, ye & 0xff); | |
| break; | |
| case 180: | |
| case 270: | |
| write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, | |
| xs >> 8, xs & 0xff, xe >> 8, xe & 0xff); | |
| write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, | |
| ys >> 8, ys & 0xff, ye >> 8, ye & 0xff); | |
| break; | |
| default: | |
| /* Fix incorrect setting */ | |
| par->info->var.rotate = 0; | |
| } | |
| write_reg(par, MIPI_DCS_WRITE_MEMORY_START); | |
| } | |
| /* | |
| * 7) MY: 1(bottom to top), 0(top to bottom) Row Address Order | |
| * 6) MX: 1(R to L), 0(L to R) Column Address Order | |
| * 5) MV: 1(Exchanged), 0(normal) Row/Column exchange | |
| * 4) ML: 1(bottom to top), 0(top to bottom) Vertical Refresh Order | |
| * 3) RGB: 1(BGR), 0(RGB) Color Space | |
| * 2) MH: 1(R to L), 0(L to R) Horizontal Refresh Order | |
| * 1) | |
| * 0) | |
| * | |
| * MY, MX, MV, ML,RGB, MH, D1, D0 | |
| * 0 | 0 | 0 | 0 | 1 | 0 | 0 | 0 //normal | |
| * 1 | 0 | 0 | 0 | 1 | 0 | 0 | 0 //Y-Mirror | |
| * 0 | 1 | 0 | 0 | 1 | 0 | 0 | 0 //X-Mirror | |
| * 1 | 1 | 0 | 0 | 1 | 0 | 0 | 0 //X-Y-Mirror | |
| * 0 | 0 | 1 | 0 | 1 | 0 | 0 | 0 //X-Y Exchange | |
| * 1 | 0 | 1 | 0 | 1 | 0 | 0 | 0 //X-Y Exchange, Y-Mirror | |
| * 0 | 1 | 1 | 0 | 1 | 0 | 0 | 0 //XY exchange | |
| * 1 | 1 | 1 | 0 | 1 | 0 | 0 | 0 | |
| */ | |
| static int set_var(struct fbtft_par *par) | |
| { | |
| u8 mactrl_data = 0; /* Avoid compiler warning */ | |
| switch (par->info->var.rotate) { | |
| case 0: | |
| mactrl_data = 0x08; | |
| break; | |
| case 180: | |
| mactrl_data = 0xC8; | |
| break; | |
| case 270: | |
| mactrl_data = 0xA8; | |
| break; | |
| case 90: | |
| mactrl_data = 0x68; | |
| break; | |
| } | |
| /* Colorspcae */ | |
| if (par->bgr) | |
| mactrl_data |= BIT(2); | |
| write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, mactrl_data); | |
| write_reg(par, MIPI_DCS_WRITE_MEMORY_START); | |
| return 0; | |
| } | |
| #ifdef GAMMA_ADJ | |
| #define CURVE(num, idx) curves[(num) * par->gamma.num_values + (idx)] | |
| static int gamma_adj(struct fbtft_par *par, u32 *curves) | |
| { | |
| unsigned long mask[] = { | |
| 0x3F, 0x3F, 0x3F, 0x3F, 0x3F, | |
| 0x1f, 0x3f, 0x0f, 0x0f, 0x7f, 0x1f, | |
| 0x3F, 0x3F, 0x3F, 0x3F, 0x3F}; | |
| int i, j; | |
| for (i = 0; i < GAMMA_NUM; i++) | |
| for (j = 0; j < GAMMA_LEN; j++) | |
| CURVE(i, j) &= mask[i * par->gamma.num_values + j]; | |
| write_reg(par, CMD_PGAMMAC, | |
| CURVE(0, 0), | |
| CURVE(0, 1), | |
| CURVE(0, 2), | |
| CURVE(0, 3), | |
| CURVE(0, 4), | |
| CURVE(0, 5), | |
| CURVE(0, 6), | |
| (CURVE(0, 7) << 4) | CURVE(0, 8), | |
| CURVE(0, 9), | |
| CURVE(0, 10), | |
| CURVE(0, 11), | |
| CURVE(0, 12), | |
| CURVE(0, 13), | |
| CURVE(0, 14), | |
| CURVE(0, 15)); | |
| /* Write Data to GRAM mode */ | |
| write_reg(par, MIPI_DCS_WRITE_MEMORY_START); | |
| return 0; | |
| } | |
| #undef CURVE | |
| #endif | |
| static struct fbtft_display display = { | |
| .regwidth = 8, | |
| .width = WIDTH, | |
| .height = HEIGHT, | |
| .bpp = BPP, | |
| .fps = FPS, | |
| #ifdef GAMMA_ADJ | |
| .gamma_num = GAMMA_NUM, | |
| .gamma_len = GAMMA_LEN, | |
| .gamma = DEFAULT_GAMMA, | |
| #endif | |
| .fbtftops = { | |
| .init_display = init_display, | |
| .set_addr_win = set_addr_win, | |
| .set_var = set_var, | |
| #ifdef GAMMA_ADJ | |
| .set_gamma = gamma_adj, | |
| #endif | |
| }, | |
| }; | |
| FBTFT_REGISTER_DRIVER(DRVNAME, "ilitek,ili9163", &display); | |
| MODULE_ALIAS("spi:" DRVNAME); | |
| MODULE_ALIAS("platform:" DRVNAME); | |
| MODULE_ALIAS("spi:ili9163"); | |
| MODULE_ALIAS("platform:ili9163"); | |
| MODULE_DESCRIPTION("FB driver for the ILI9163 LCD Controller"); | |
| MODULE_AUTHOR("Kozhevnikov Anatoly"); | |
| MODULE_LICENSE("GPL"); |