| // SPDX-License-Identifier: GPL-2.0+ | |
| /* | |
| * FB driver for the S6D02A1 LCD Controller | |
| * | |
| * Based on fb_st7735r.c by Noralf Tronnes | |
| * Init code from UTFT library by Henning Karlsen | |
| */ | |
| #include <linux/module.h> | |
| #include <linux/kernel.h> | |
| #include <linux/init.h> | |
| #include <video/mipi_display.h> | |
| #include "fbtft.h" | |
| #define DRVNAME "fb_s6d02a1" | |
| static const s16 default_init_sequence[] = { | |
| -1, 0xf0, 0x5a, 0x5a, | |
| -1, 0xfc, 0x5a, 0x5a, | |
| -1, 0xfa, 0x02, 0x1f, 0x00, 0x10, 0x22, 0x30, 0x38, | |
| 0x3A, 0x3A, 0x3A, 0x3A, 0x3A, 0x3d, 0x02, 0x01, | |
| -1, 0xfb, 0x21, 0x00, 0x02, 0x04, 0x07, 0x0a, 0x0b, | |
| 0x0c, 0x0c, 0x16, 0x1e, 0x30, 0x3f, 0x01, 0x02, | |
| /* power setting sequence */ | |
| -1, 0xfd, 0x00, 0x00, 0x00, 0x17, 0x10, 0x00, 0x01, | |
| 0x01, 0x00, 0x1f, 0x1f, | |
| -1, 0xf4, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f, | |
| 0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00, | |
| -1, 0xf5, 0x00, 0x70, 0x66, 0x00, 0x00, 0x00, 0x00, | |
| 0x00, 0x00, 0x00, 0x6d, 0x66, 0x06, | |
| -1, 0xf6, 0x02, 0x00, 0x3f, 0x00, 0x00, 0x00, 0x02, | |
| 0x00, 0x06, 0x01, 0x00, | |
| -1, 0xf2, 0x00, 0x01, 0x03, 0x08, 0x08, 0x04, 0x00, | |
| 0x00, 0x00, 0x00, 0x00, 0x01, 0x00, 0x00, 0x04, 0x08, 0x08, | |
| -1, 0xf8, 0x11, | |
| -1, 0xf7, 0xc8, 0x20, 0x00, 0x00, | |
| -1, 0xf3, 0x00, 0x00, | |
| -1, MIPI_DCS_EXIT_SLEEP_MODE, | |
| -2, 50, | |
| -1, 0xf3, 0x00, 0x01, | |
| -2, 50, | |
| -1, 0xf3, 0x00, 0x03, | |
| -2, 50, | |
| -1, 0xf3, 0x00, 0x07, | |
| -2, 50, | |
| -1, 0xf3, 0x00, 0x0f, | |
| -2, 50, | |
| -1, 0xf4, 0x00, 0x04, 0x00, 0x00, 0x00, 0x3f, 0x3f, | |
| 0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00, | |
| -2, 50, | |
| -1, 0xf3, 0x00, 0x1f, | |
| -2, 50, | |
| -1, 0xf3, 0x00, 0x7f, | |
| -2, 50, | |
| -1, 0xf3, 0x00, 0xff, | |
| -2, 50, | |
| -1, 0xfd, 0x00, 0x00, 0x00, 0x17, 0x10, 0x00, 0x00, | |
| 0x01, 0x00, 0x16, 0x16, | |
| -1, 0xf4, 0x00, 0x09, 0x00, 0x00, 0x00, 0x3f, 0x3f, | |
| 0x07, 0x00, 0x3C, 0x36, 0x00, 0x3C, 0x36, 0x00, | |
| /* initializing sequence */ | |
| -1, MIPI_DCS_SET_ADDRESS_MODE, 0x08, | |
| -1, MIPI_DCS_SET_TEAR_ON, 0x00, | |
| -1, MIPI_DCS_SET_PIXEL_FORMAT, 0x05, | |
| /* gamma setting - possible values 0x01, 0x02, 0x04, 0x08 */ | |
| -1, MIPI_DCS_SET_GAMMA_CURVE, 0x01, | |
| -2, 150, | |
| -1, MIPI_DCS_SET_DISPLAY_ON, | |
| -1, MIPI_DCS_WRITE_MEMORY_START, | |
| /* end marker */ | |
| -3 | |
| }; | |
| static void set_addr_win(struct fbtft_par *par, int xs, int ys, int xe, int ye) | |
| { | |
| write_reg(par, MIPI_DCS_SET_COLUMN_ADDRESS, | |
| xs >> 8, xs & 0xFF, xe >> 8, xe & 0xFF); | |
| write_reg(par, MIPI_DCS_SET_PAGE_ADDRESS, | |
| ys >> 8, ys & 0xFF, ye >> 8, ye & 0xFF); | |
| write_reg(par, MIPI_DCS_WRITE_MEMORY_START); | |
| } | |
| #define MY BIT(7) | |
| #define MX BIT(6) | |
| #define MV BIT(5) | |
| static int set_var(struct fbtft_par *par) | |
| { | |
| /* | |
| * Memory data access control (0x36h) | |
| * RGB/BGR: | |
| * 1. Mode selection pin SRGB | |
| * RGB H/W pin for color filter setting: 0=RGB, 1=BGR | |
| * 2. MADCTL RGB bit | |
| * RGB-BGR ORDER color filter panel: 0=RGB, 1=BGR | |
| */ | |
| switch (par->info->var.rotate) { | |
| case 0: | |
| write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, | |
| MX | MY | (par->bgr << 3)); | |
| break; | |
| case 270: | |
| write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, | |
| MY | MV | (par->bgr << 3)); | |
| break; | |
| case 180: | |
| write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, | |
| par->bgr << 3); | |
| break; | |
| case 90: | |
| write_reg(par, MIPI_DCS_SET_ADDRESS_MODE, | |
| MX | MV | (par->bgr << 3)); | |
| break; | |
| } | |
| return 0; | |
| } | |
| static struct fbtft_display display = { | |
| .regwidth = 8, | |
| .width = 128, | |
| .height = 160, | |
| .init_sequence = default_init_sequence, | |
| .fbtftops = { | |
| .set_addr_win = set_addr_win, | |
| .set_var = set_var, | |
| }, | |
| }; | |
| FBTFT_REGISTER_DRIVER(DRVNAME, "samsung,s6d02a1", &display); | |
| MODULE_ALIAS("spi:" DRVNAME); | |
| MODULE_ALIAS("platform:" DRVNAME); | |
| MODULE_ALIAS("spi:s6d02a1"); | |
| MODULE_ALIAS("platform:s6d02a1"); | |
| MODULE_DESCRIPTION("FB driver for the S6D02A1 LCD Controller"); | |
| MODULE_AUTHOR("WOLFGANG BUENING"); | |
| MODULE_LICENSE("GPL"); |