| // SPDX-License-Identifier: (GPL-2.0 OR MPL-1.1) | |
| /* from src/prism2/download/prism2dl.c | |
| * | |
| * utility for downloading prism2 images moved into kernelspace | |
| * | |
| * Copyright (C) 1999 AbsoluteValue Systems, Inc. All Rights Reserved. | |
| * -------------------------------------------------------------------- | |
| * | |
| * linux-wlan | |
| * | |
| * The contents of this file are subject to the Mozilla Public | |
| * License Version 1.1 (the "License"); you may not use this file | |
| * except in compliance with the License. You may obtain a copy of | |
| * the License at http://www.mozilla.org/MPL/ | |
| * | |
| * Software distributed under the License is distributed on an "AS | |
| * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or | |
| * implied. See the License for the specific language governing | |
| * rights and limitations under the License. | |
| * | |
| * Alternatively, the contents of this file may be used under the | |
| * terms of the GNU Public License version 2 (the "GPL"), in which | |
| * case the provisions of the GPL are applicable instead of the | |
| * above. If you wish to allow the use of your version of this file | |
| * only under the terms of the GPL and not to allow others to use | |
| * your version of this file under the MPL, indicate your decision | |
| * by deleting the provisions above and replace them with the notice | |
| * and other provisions required by the GPL. If you do not delete | |
| * the provisions above, a recipient may use your version of this | |
| * file under either the MPL or the GPL. | |
| * | |
| * -------------------------------------------------------------------- | |
| * | |
| * Inquiries regarding the linux-wlan Open Source project can be | |
| * made directly to: | |
| * | |
| * AbsoluteValue Systems Inc. | |
| * info@linux-wlan.com | |
| * http://www.linux-wlan.com | |
| * | |
| * -------------------------------------------------------------------- | |
| * | |
| * Portions of the development of this software were funded by | |
| * Intersil Corporation as part of PRISM(R) chipset product development. | |
| * | |
| * -------------------------------------------------------------------- | |
| */ | |
| /*================================================================*/ | |
| /* System Includes */ | |
| #include <linux/ihex.h> | |
| #include <linux/slab.h> | |
| /*================================================================*/ | |
| /* Local Constants */ | |
| #define PRISM2_USB_FWFILE "prism2_ru.fw" | |
| MODULE_FIRMWARE(PRISM2_USB_FWFILE); | |
| #define S3DATA_MAX 5000 | |
| #define S3PLUG_MAX 200 | |
| #define S3CRC_MAX 200 | |
| #define S3INFO_MAX 50 | |
| #define S3ADDR_PLUG (0xff000000UL) | |
| #define S3ADDR_CRC (0xff100000UL) | |
| #define S3ADDR_INFO (0xff200000UL) | |
| #define S3ADDR_START (0xff400000UL) | |
| #define CHUNKS_MAX 100 | |
| #define WRITESIZE_MAX 4096 | |
| /*================================================================*/ | |
| /* Local Types */ | |
| struct s3datarec { | |
| u32 len; | |
| u32 addr; | |
| u8 checksum; | |
| u8 *data; | |
| }; | |
| struct s3plugrec { | |
| u32 itemcode; | |
| u32 addr; | |
| u32 len; | |
| }; | |
| struct s3crcrec { | |
| u32 addr; | |
| u32 len; | |
| unsigned int dowrite; | |
| }; | |
| struct s3inforec { | |
| u16 len; | |
| u16 type; | |
| union { | |
| struct hfa384x_compident version; | |
| struct hfa384x_caplevel compat; | |
| u16 buildseq; | |
| struct hfa384x_compident platform; | |
| } info; | |
| }; | |
| struct pda { | |
| u8 buf[HFA384x_PDA_LEN_MAX]; | |
| struct hfa384x_pdrec *rec[HFA384x_PDA_RECS_MAX]; | |
| unsigned int nrec; | |
| }; | |
| struct imgchunk { | |
| u32 addr; /* start address */ | |
| u32 len; /* in bytes */ | |
| u16 crc; /* CRC value (if it falls at a chunk boundary) */ | |
| u8 *data; | |
| }; | |
| /*================================================================*/ | |
| /* Local Static Definitions */ | |
| /*----------------------------------------------------------------*/ | |
| /* s-record image processing */ | |
| /* Data records */ | |
| static unsigned int ns3data; | |
| static struct s3datarec *s3data; | |
| /* Plug records */ | |
| static unsigned int ns3plug; | |
| static struct s3plugrec s3plug[S3PLUG_MAX]; | |
| /* CRC records */ | |
| static unsigned int ns3crc; | |
| static struct s3crcrec s3crc[S3CRC_MAX]; | |
| /* Info records */ | |
| static unsigned int ns3info; | |
| static struct s3inforec s3info[S3INFO_MAX]; | |
| /* S7 record (there _better_ be only one) */ | |
| static u32 startaddr; | |
| /* Load image chunks */ | |
| static unsigned int nfchunks; | |
| static struct imgchunk fchunk[CHUNKS_MAX]; | |
| /* Note that for the following pdrec_t arrays, the len and code */ | |
| /* fields are stored in HOST byte order. The mkpdrlist() function */ | |
| /* does the conversion. */ | |
| /*----------------------------------------------------------------*/ | |
| /* PDA, built from [card|newfile]+[addfile1+addfile2...] */ | |
| static struct pda pda; | |
| static struct hfa384x_compident nicid; | |
| static struct hfa384x_caplevel rfid; | |
| static struct hfa384x_caplevel macid; | |
| static struct hfa384x_caplevel priid; | |
| /*================================================================*/ | |
| /* Local Function Declarations */ | |
| static int prism2_fwapply(const struct ihex_binrec *rfptr, | |
| struct wlandevice *wlandev); | |
| static int read_fwfile(const struct ihex_binrec *rfptr); | |
| static int mkimage(struct imgchunk *clist, unsigned int *ccnt); | |
| static int read_cardpda(struct pda *pda, struct wlandevice *wlandev); | |
| static int mkpdrlist(struct pda *pda); | |
| static int plugimage(struct imgchunk *fchunk, unsigned int nfchunks, | |
| struct s3plugrec *s3plug, unsigned int ns3plug, | |
| struct pda *pda); | |
| static int crcimage(struct imgchunk *fchunk, unsigned int nfchunks, | |
| struct s3crcrec *s3crc, unsigned int ns3crc); | |
| static int writeimage(struct wlandevice *wlandev, struct imgchunk *fchunk, | |
| unsigned int nfchunks); | |
| static void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks); | |
| static void free_srecs(void); | |
| static int validate_identity(void); | |
| /*================================================================*/ | |
| /* Function Definitions */ | |
| /*---------------------------------------------------------------- | |
| * prism2_fwtry | |
| * | |
| * Try and get firmware into memory | |
| * | |
| * Arguments: | |
| * udev usb device structure | |
| * wlandev wlan device structure | |
| * | |
| * Returns: | |
| * 0 - success | |
| * ~0 - failure | |
| *---------------------------------------------------------------- | |
| */ | |
| static int prism2_fwtry(struct usb_device *udev, struct wlandevice *wlandev) | |
| { | |
| const struct firmware *fw_entry = NULL; | |
| netdev_info(wlandev->netdev, "prism2_usb: Checking for firmware %s\n", | |
| PRISM2_USB_FWFILE); | |
| if (request_ihex_firmware(&fw_entry, | |
| PRISM2_USB_FWFILE, &udev->dev) != 0) { | |
| netdev_info(wlandev->netdev, | |
| "prism2_usb: Firmware not available, but not essential\n"); | |
| netdev_info(wlandev->netdev, | |
| "prism2_usb: can continue to use card anyway.\n"); | |
| return 1; | |
| } | |
| netdev_info(wlandev->netdev, | |
| "prism2_usb: %s will be processed, size %zu\n", | |
| PRISM2_USB_FWFILE, fw_entry->size); | |
| prism2_fwapply((const struct ihex_binrec *)fw_entry->data, wlandev); | |
| release_firmware(fw_entry); | |
| return 0; | |
| } | |
| /*---------------------------------------------------------------- | |
| * prism2_fwapply | |
| * | |
| * Apply the firmware loaded into memory | |
| * | |
| * Arguments: | |
| * rfptr firmware image in kernel memory | |
| * wlandev device | |
| * | |
| * Returns: | |
| * 0 - success | |
| * ~0 - failure | |
| *---------------------------------------------------------------- | |
| */ | |
| static int prism2_fwapply(const struct ihex_binrec *rfptr, | |
| struct wlandevice *wlandev) | |
| { | |
| signed int result = 0; | |
| struct p80211msg_dot11req_mibget getmsg; | |
| struct p80211itemd *item; | |
| u32 *data; | |
| /* Initialize the data structures */ | |
| ns3data = 0; | |
| s3data = kcalloc(S3DATA_MAX, sizeof(*s3data), GFP_KERNEL); | |
| if (!s3data) { | |
| result = -ENOMEM; | |
| goto out; | |
| } | |
| ns3plug = 0; | |
| memset(s3plug, 0, sizeof(s3plug)); | |
| ns3crc = 0; | |
| memset(s3crc, 0, sizeof(s3crc)); | |
| ns3info = 0; | |
| memset(s3info, 0, sizeof(s3info)); | |
| startaddr = 0; | |
| nfchunks = 0; | |
| memset(fchunk, 0, sizeof(fchunk)); | |
| memset(&nicid, 0, sizeof(nicid)); | |
| memset(&rfid, 0, sizeof(rfid)); | |
| memset(&macid, 0, sizeof(macid)); | |
| memset(&priid, 0, sizeof(priid)); | |
| /* clear the pda and add an initial END record */ | |
| memset(&pda, 0, sizeof(pda)); | |
| pda.rec[0] = (struct hfa384x_pdrec *)pda.buf; | |
| pda.rec[0]->len = cpu_to_le16(2); /* len in words */ | |
| pda.rec[0]->code = cpu_to_le16(HFA384x_PDR_END_OF_PDA); | |
| pda.nrec = 1; | |
| /*-----------------------------------------------------*/ | |
| /* Put card into fwload state */ | |
| prism2sta_ifstate(wlandev, P80211ENUM_ifstate_fwload); | |
| /* Build the PDA we're going to use. */ | |
| if (read_cardpda(&pda, wlandev)) { | |
| netdev_err(wlandev->netdev, "load_cardpda failed, exiting.\n"); | |
| result = 1; | |
| goto out; | |
| } | |
| /* read the card's PRI-SUP */ | |
| memset(&getmsg, 0, sizeof(getmsg)); | |
| getmsg.msgcode = DIDmsg_dot11req_mibget; | |
| getmsg.msglen = sizeof(getmsg); | |
| strcpy(getmsg.devname, wlandev->name); | |
| getmsg.mibattribute.did = DIDmsg_dot11req_mibget_mibattribute; | |
| getmsg.mibattribute.status = P80211ENUM_msgitem_status_data_ok; | |
| getmsg.resultcode.did = DIDmsg_dot11req_mibget_resultcode; | |
| getmsg.resultcode.status = P80211ENUM_msgitem_status_no_value; | |
| item = (struct p80211itemd *)getmsg.mibattribute.data; | |
| item->did = DIDmib_p2_p2NIC_p2PRISupRange; | |
| item->status = P80211ENUM_msgitem_status_no_value; | |
| data = (u32 *)item->data; | |
| /* DIDmsg_dot11req_mibget */ | |
| prism2mgmt_mibset_mibget(wlandev, &getmsg); | |
| if (getmsg.resultcode.data != P80211ENUM_resultcode_success) | |
| netdev_err(wlandev->netdev, "Couldn't fetch PRI-SUP info\n"); | |
| /* Already in host order */ | |
| priid.role = *data++; | |
| priid.id = *data++; | |
| priid.variant = *data++; | |
| priid.bottom = *data++; | |
| priid.top = *data++; | |
| /* Read the S3 file */ | |
| result = read_fwfile(rfptr); | |
| if (result) { | |
| netdev_err(wlandev->netdev, | |
| "Failed to read the data exiting.\n"); | |
| goto out; | |
| } | |
| result = validate_identity(); | |
| if (result) { | |
| netdev_err(wlandev->netdev, "Incompatible firmware image.\n"); | |
| goto out; | |
| } | |
| if (startaddr == 0x00000000) { | |
| netdev_err(wlandev->netdev, | |
| "Can't RAM download a Flash image!\n"); | |
| result = 1; | |
| goto out; | |
| } | |
| /* Make the image chunks */ | |
| result = mkimage(fchunk, &nfchunks); | |
| if (result) { | |
| netdev_err(wlandev->netdev, "Failed to make image chunk.\n"); | |
| goto free_chunks; | |
| } | |
| /* Do any plugging */ | |
| result = plugimage(fchunk, nfchunks, s3plug, ns3plug, &pda); | |
| if (result) { | |
| netdev_err(wlandev->netdev, "Failed to plug data.\n"); | |
| goto free_chunks; | |
| } | |
| /* Insert any CRCs */ | |
| result = crcimage(fchunk, nfchunks, s3crc, ns3crc); | |
| if (result) { | |
| netdev_err(wlandev->netdev, "Failed to insert all CRCs\n"); | |
| goto free_chunks; | |
| } | |
| /* Write the image */ | |
| result = writeimage(wlandev, fchunk, nfchunks); | |
| if (result) { | |
| netdev_err(wlandev->netdev, "Failed to ramwrite image data.\n"); | |
| goto free_chunks; | |
| } | |
| netdev_info(wlandev->netdev, "prism2_usb: firmware loading finished.\n"); | |
| free_chunks: | |
| /* clear any allocated memory */ | |
| free_chunks(fchunk, &nfchunks); | |
| free_srecs(); | |
| out: | |
| return result; | |
| } | |
| /*---------------------------------------------------------------- | |
| * crcimage | |
| * | |
| * Adds a CRC16 in the two bytes prior to each block identified by | |
| * an S3 CRC record. Currently, we don't actually do a CRC we just | |
| * insert the value 0xC0DE in hfa384x order. | |
| * | |
| * Arguments: | |
| * fchunk Array of image chunks | |
| * nfchunks Number of image chunks | |
| * s3crc Array of crc records | |
| * ns3crc Number of crc records | |
| * | |
| * Returns: | |
| * 0 success | |
| * ~0 failure | |
| *---------------------------------------------------------------- | |
| */ | |
| static int crcimage(struct imgchunk *fchunk, unsigned int nfchunks, | |
| struct s3crcrec *s3crc, unsigned int ns3crc) | |
| { | |
| int result = 0; | |
| int i; | |
| int c; | |
| u32 crcstart; | |
| u32 crcend; | |
| u32 cstart = 0; | |
| u32 cend; | |
| u8 *dest; | |
| u32 chunkoff; | |
| for (i = 0; i < ns3crc; i++) { | |
| if (!s3crc[i].dowrite) | |
| continue; | |
| crcstart = s3crc[i].addr; | |
| crcend = s3crc[i].addr + s3crc[i].len; | |
| /* Find chunk */ | |
| for (c = 0; c < nfchunks; c++) { | |
| cstart = fchunk[c].addr; | |
| cend = fchunk[c].addr + fchunk[c].len; | |
| /* the line below does an address & len match search */ | |
| /* unfortunately, I've found that the len fields of */ | |
| /* some crc records don't match with the length of */ | |
| /* the actual data, so we're not checking right now */ | |
| /* if (crcstart-2 >= cstart && crcend <= cend) break; */ | |
| /* note the -2 below, it's to make sure the chunk has */ | |
| /* space for the CRC value */ | |
| if (crcstart - 2 >= cstart && crcstart < cend) | |
| break; | |
| } | |
| if (c >= nfchunks) { | |
| pr_err("Failed to find chunk for crcrec[%d], addr=0x%06x len=%d , aborting crc.\n", | |
| i, s3crc[i].addr, s3crc[i].len); | |
| return 1; | |
| } | |
| /* Insert crc */ | |
| pr_debug("Adding crc @ 0x%06x\n", s3crc[i].addr - 2); | |
| chunkoff = crcstart - cstart - 2; | |
| dest = fchunk[c].data + chunkoff; | |
| *dest = 0xde; | |
| *(dest + 1) = 0xc0; | |
| } | |
| return result; | |
| } | |
| /*---------------------------------------------------------------- | |
| * free_chunks | |
| * | |
| * Clears the chunklist data structures in preparation for a new file. | |
| * | |
| * Arguments: | |
| * none | |
| * | |
| * Returns: | |
| * nothing | |
| *---------------------------------------------------------------- | |
| */ | |
| static void free_chunks(struct imgchunk *fchunk, unsigned int *nfchunks) | |
| { | |
| int i; | |
| for (i = 0; i < *nfchunks; i++) | |
| kfree(fchunk[i].data); | |
| *nfchunks = 0; | |
| memset(fchunk, 0, sizeof(*fchunk)); | |
| } | |
| /*---------------------------------------------------------------- | |
| * free_srecs | |
| * | |
| * Clears the srec data structures in preparation for a new file. | |
| * | |
| * Arguments: | |
| * none | |
| * | |
| * Returns: | |
| * nothing | |
| *---------------------------------------------------------------- | |
| */ | |
| static void free_srecs(void) | |
| { | |
| ns3data = 0; | |
| kfree(s3data); | |
| ns3plug = 0; | |
| memset(s3plug, 0, sizeof(s3plug)); | |
| ns3crc = 0; | |
| memset(s3crc, 0, sizeof(s3crc)); | |
| ns3info = 0; | |
| memset(s3info, 0, sizeof(s3info)); | |
| startaddr = 0; | |
| } | |
| /*---------------------------------------------------------------- | |
| * mkimage | |
| * | |
| * Scans the currently loaded set of S records for data residing | |
| * in contiguous memory regions. Each contiguous region is then | |
| * made into a 'chunk'. This function assumes that we're building | |
| * a new chunk list. Assumes the s3data items are in sorted order. | |
| * | |
| * Arguments: none | |
| * | |
| * Returns: | |
| * 0 - success | |
| * ~0 - failure (probably an errno) | |
| *---------------------------------------------------------------- | |
| */ | |
| static int mkimage(struct imgchunk *clist, unsigned int *ccnt) | |
| { | |
| int result = 0; | |
| int i; | |
| int j; | |
| int currchunk = 0; | |
| u32 nextaddr = 0; | |
| u32 s3start; | |
| u32 s3end; | |
| u32 cstart = 0; | |
| u32 cend; | |
| u32 coffset; | |
| /* There may already be data in the chunklist */ | |
| *ccnt = 0; | |
| /* Establish the location and size of each chunk */ | |
| for (i = 0; i < ns3data; i++) { | |
| if (s3data[i].addr == nextaddr) { | |
| /* existing chunk, grow it */ | |
| clist[currchunk].len += s3data[i].len; | |
| nextaddr += s3data[i].len; | |
| } else { | |
| /* New chunk */ | |
| (*ccnt)++; | |
| currchunk = *ccnt - 1; | |
| clist[currchunk].addr = s3data[i].addr; | |
| clist[currchunk].len = s3data[i].len; | |
| nextaddr = s3data[i].addr + s3data[i].len; | |
| /* Expand the chunk if there is a CRC record at */ | |
| /* their beginning bound */ | |
| for (j = 0; j < ns3crc; j++) { | |
| if (s3crc[j].dowrite && | |
| s3crc[j].addr == clist[currchunk].addr) { | |
| clist[currchunk].addr -= 2; | |
| clist[currchunk].len += 2; | |
| } | |
| } | |
| } | |
| } | |
| /* We're currently assuming there aren't any overlapping chunks */ | |
| /* if this proves false, we'll need to add code to coalesce. */ | |
| /* Allocate buffer space for chunks */ | |
| for (i = 0; i < *ccnt; i++) { | |
| clist[i].data = kzalloc(clist[i].len, GFP_KERNEL); | |
| if (!clist[i].data) { | |
| pr_err("failed to allocate image space, exitting.\n"); | |
| return 1; | |
| } | |
| pr_debug("chunk[%d]: addr=0x%06x len=%d\n", | |
| i, clist[i].addr, clist[i].len); | |
| } | |
| /* Copy srec data to chunks */ | |
| for (i = 0; i < ns3data; i++) { | |
| s3start = s3data[i].addr; | |
| s3end = s3start + s3data[i].len - 1; | |
| for (j = 0; j < *ccnt; j++) { | |
| cstart = clist[j].addr; | |
| cend = cstart + clist[j].len - 1; | |
| if (s3start >= cstart && s3end <= cend) | |
| break; | |
| } | |
| if (((unsigned int)j) >= (*ccnt)) { | |
| pr_err("s3rec(a=0x%06x,l=%d), no chunk match, exiting.\n", | |
| s3start, s3data[i].len); | |
| return 1; | |
| } | |
| coffset = s3start - cstart; | |
| memcpy(clist[j].data + coffset, s3data[i].data, s3data[i].len); | |
| } | |
| return result; | |
| } | |
| /*---------------------------------------------------------------- | |
| * mkpdrlist | |
| * | |
| * Reads a raw PDA and builds an array of pdrec_t structures. | |
| * | |
| * Arguments: | |
| * pda buffer containing raw PDA bytes | |
| * pdrec ptr to an array of pdrec_t's. Will be filled on exit. | |
| * nrec ptr to a variable that will contain the count of PDRs | |
| * | |
| * Returns: | |
| * 0 - success | |
| * ~0 - failure (probably an errno) | |
| *---------------------------------------------------------------- | |
| */ | |
| static int mkpdrlist(struct pda *pda) | |
| { | |
| __le16 *pda16 = (__le16 *)pda->buf; | |
| int curroff; /* in 'words' */ | |
| pda->nrec = 0; | |
| curroff = 0; | |
| while (curroff < (HFA384x_PDA_LEN_MAX / 2 - 1) && | |
| le16_to_cpu(pda16[curroff + 1]) != HFA384x_PDR_END_OF_PDA) { | |
| pda->rec[pda->nrec] = (struct hfa384x_pdrec *)&pda16[curroff]; | |
| if (le16_to_cpu(pda->rec[pda->nrec]->code) == | |
| HFA384x_PDR_NICID) { | |
| memcpy(&nicid, &pda->rec[pda->nrec]->data.nicid, | |
| sizeof(nicid)); | |
| le16_to_cpus(&nicid.id); | |
| le16_to_cpus(&nicid.variant); | |
| le16_to_cpus(&nicid.major); | |
| le16_to_cpus(&nicid.minor); | |
| } | |
| if (le16_to_cpu(pda->rec[pda->nrec]->code) == | |
| HFA384x_PDR_MFISUPRANGE) { | |
| memcpy(&rfid, &pda->rec[pda->nrec]->data.mfisuprange, | |
| sizeof(rfid)); | |
| le16_to_cpus(&rfid.id); | |
| le16_to_cpus(&rfid.variant); | |
| le16_to_cpus(&rfid.bottom); | |
| le16_to_cpus(&rfid.top); | |
| } | |
| if (le16_to_cpu(pda->rec[pda->nrec]->code) == | |
| HFA384x_PDR_CFISUPRANGE) { | |
| memcpy(&macid, &pda->rec[pda->nrec]->data.cfisuprange, | |
| sizeof(macid)); | |
| le16_to_cpus(&macid.id); | |
| le16_to_cpus(&macid.variant); | |
| le16_to_cpus(&macid.bottom); | |
| le16_to_cpus(&macid.top); | |
| } | |
| (pda->nrec)++; | |
| curroff += le16_to_cpu(pda16[curroff]) + 1; | |
| } | |
| if (curroff >= (HFA384x_PDA_LEN_MAX / 2 - 1)) { | |
| pr_err("no end record found or invalid lengths in PDR data, exiting. %x %d\n", | |
| curroff, pda->nrec); | |
| return 1; | |
| } | |
| pda->rec[pda->nrec] = (struct hfa384x_pdrec *)&pda16[curroff]; | |
| (pda->nrec)++; | |
| return 0; | |
| } | |
| /*---------------------------------------------------------------- | |
| * plugimage | |
| * | |
| * Plugs the given image using the given plug records from the given | |
| * PDA and filename. | |
| * | |
| * Arguments: | |
| * fchunk Array of image chunks | |
| * nfchunks Number of image chunks | |
| * s3plug Array of plug records | |
| * ns3plug Number of plug records | |
| * pda Current pda data | |
| * | |
| * Returns: | |
| * 0 success | |
| * ~0 failure | |
| *---------------------------------------------------------------- | |
| */ | |
| static int plugimage(struct imgchunk *fchunk, unsigned int nfchunks, | |
| struct s3plugrec *s3plug, unsigned int ns3plug, | |
| struct pda *pda) | |
| { | |
| int result = 0; | |
| int i; /* plug index */ | |
| int j; /* index of PDR or -1 if fname plug */ | |
| int c; /* chunk index */ | |
| u32 pstart; | |
| u32 pend; | |
| u32 cstart = 0; | |
| u32 cend; | |
| u32 chunkoff; | |
| u8 *dest; | |
| /* for each plug record */ | |
| for (i = 0; i < ns3plug; i++) { | |
| pstart = s3plug[i].addr; | |
| pend = s3plug[i].addr + s3plug[i].len; | |
| /* find the matching PDR (or filename) */ | |
| if (s3plug[i].itemcode != 0xffffffffUL) { /* not filename */ | |
| for (j = 0; j < pda->nrec; j++) { | |
| if (s3plug[i].itemcode == | |
| le16_to_cpu(pda->rec[j]->code)) | |
| break; | |
| } | |
| } else { | |
| j = -1; | |
| } | |
| if (j >= pda->nrec && j != -1) { /* if no matching PDR, fail */ | |
| pr_warn("warning: Failed to find PDR for plugrec 0x%04x.\n", | |
| s3plug[i].itemcode); | |
| continue; /* and move on to the next PDR */ | |
| #if 0 | |
| /* MSM: They swear that unless it's the MAC address, | |
| * the serial number, or the TX calibration records, | |
| * then there's reasonable defaults in the f/w | |
| * image. Therefore, missing PDRs in the card | |
| * should only be a warning, not fatal. | |
| * TODO: add fatals for the PDRs mentioned above. | |
| */ | |
| result = 1; | |
| continue; | |
| #endif | |
| } | |
| /* Validate plug len against PDR len */ | |
| if (j != -1 && s3plug[i].len < le16_to_cpu(pda->rec[j]->len)) { | |
| pr_err("error: Plug vs. PDR len mismatch for plugrec 0x%04x, abort plugging.\n", | |
| s3plug[i].itemcode); | |
| result = 1; | |
| continue; | |
| } | |
| /* | |
| * Validate plug address against | |
| * chunk data and identify chunk | |
| */ | |
| for (c = 0; c < nfchunks; c++) { | |
| cstart = fchunk[c].addr; | |
| cend = fchunk[c].addr + fchunk[c].len; | |
| if (pstart >= cstart && pend <= cend) | |
| break; | |
| } | |
| if (c >= nfchunks) { | |
| pr_err("error: Failed to find image chunk for plugrec 0x%04x.\n", | |
| s3plug[i].itemcode); | |
| result = 1; | |
| continue; | |
| } | |
| /* Plug data */ | |
| chunkoff = pstart - cstart; | |
| dest = fchunk[c].data + chunkoff; | |
| pr_debug("Plugging item 0x%04x @ 0x%06x, len=%d, cnum=%d coff=0x%06x\n", | |
| s3plug[i].itemcode, pstart, s3plug[i].len, | |
| c, chunkoff); | |
| if (j == -1) { /* plug the filename */ | |
| memset(dest, 0, s3plug[i].len); | |
| strncpy(dest, PRISM2_USB_FWFILE, s3plug[i].len - 1); | |
| } else { /* plug a PDR */ | |
| memcpy(dest, &pda->rec[j]->data, s3plug[i].len); | |
| } | |
| } | |
| return result; | |
| } | |
| /*---------------------------------------------------------------- | |
| * read_cardpda | |
| * | |
| * Sends the command for the driver to read the pda from the card | |
| * named in the device variable. Upon success, the card pda is | |
| * stored in the "cardpda" variables. Note that the pda structure | |
| * is considered 'well formed' after this function. That means | |
| * that the nrecs is valid, the rec array has been set up, and there's | |
| * a valid PDAEND record in the raw PDA data. | |
| * | |
| * Arguments: | |
| * pda pda structure | |
| * wlandev device | |
| * | |
| * Returns: | |
| * 0 - success | |
| * ~0 - failure (probably an errno) | |
| *---------------------------------------------------------------- | |
| */ | |
| static int read_cardpda(struct pda *pda, struct wlandevice *wlandev) | |
| { | |
| int result = 0; | |
| struct p80211msg_p2req_readpda *msg; | |
| msg = kzalloc(sizeof(*msg), GFP_KERNEL); | |
| if (!msg) | |
| return -ENOMEM; | |
| /* set up the msg */ | |
| msg->msgcode = DIDmsg_p2req_readpda; | |
| msg->msglen = sizeof(msg); | |
| strcpy(msg->devname, wlandev->name); | |
| msg->pda.did = DIDmsg_p2req_readpda_pda; | |
| msg->pda.len = HFA384x_PDA_LEN_MAX; | |
| msg->pda.status = P80211ENUM_msgitem_status_no_value; | |
| msg->resultcode.did = DIDmsg_p2req_readpda_resultcode; | |
| msg->resultcode.len = sizeof(u32); | |
| msg->resultcode.status = P80211ENUM_msgitem_status_no_value; | |
| if (prism2mgmt_readpda(wlandev, msg) != 0) { | |
| /* prism2mgmt_readpda prints an errno if appropriate */ | |
| result = -1; | |
| } else if (msg->resultcode.data == P80211ENUM_resultcode_success) { | |
| memcpy(pda->buf, msg->pda.data, HFA384x_PDA_LEN_MAX); | |
| result = mkpdrlist(pda); | |
| } else { | |
| /* resultcode must've been something other than success */ | |
| result = -1; | |
| } | |
| kfree(msg); | |
| return result; | |
| } | |
| /*---------------------------------------------------------------- | |
| * read_fwfile | |
| * | |
| * Reads the given fw file which should have been compiled from an srec | |
| * file. Each record in the fw file will either be a plain data record, | |
| * a start address record, or other records used for plugging. | |
| * | |
| * Note that data records are expected to be sorted into | |
| * ascending address order in the fw file. | |
| * | |
| * Note also that the start address record, originally an S7 record in | |
| * the srec file, is expected in the fw file to be like a data record but | |
| * with a certain address to make it identifiable. | |
| * | |
| * Here's the SREC format that the fw should have come from: | |
| * S[37]nnaaaaaaaaddd...dddcc | |
| * | |
| * nn - number of bytes starting with the address field | |
| * aaaaaaaa - address in readable (or big endian) format | |
| * dd....dd - 0-245 data bytes (two chars per byte) | |
| * cc - checksum | |
| * | |
| * The S7 record's (there should be only one) address value gets | |
| * converted to an S3 record with address of 0xff400000, with the | |
| * start address being stored as a 4 byte data word. That address is | |
| * the start execution address used for RAM downloads. | |
| * | |
| * The S3 records have a collection of subformats indicated by the | |
| * value of aaaaaaaa: | |
| * 0xff000000 - Plug record, data field format: | |
| * xxxxxxxxaaaaaaaassssssss | |
| * x - PDR code number (little endian) | |
| * a - Address in load image to plug (little endian) | |
| * s - Length of plug data area (little endian) | |
| * | |
| * 0xff100000 - CRC16 generation record, data field format: | |
| * aaaaaaaassssssssbbbbbbbb | |
| * a - Start address for CRC calculation (little endian) | |
| * s - Length of data to calculate over (little endian) | |
| * b - Boolean, true=write crc, false=don't write | |
| * | |
| * 0xff200000 - Info record, data field format: | |
| * ssssttttdd..dd | |
| * s - Size in words (little endian) | |
| * t - Info type (little endian), see #defines and | |
| * struct s3inforec for details about types. | |
| * d - (s - 1) little endian words giving the contents of | |
| * the given info type. | |
| * | |
| * 0xff400000 - Start address record, data field format: | |
| * aaaaaaaa | |
| * a - Address in load image to plug (little endian) | |
| * | |
| * Arguments: | |
| * record firmware image (ihex record structure) in kernel memory | |
| * | |
| * Returns: | |
| * 0 - success | |
| * ~0 - failure (probably an errno) | |
| *---------------------------------------------------------------- | |
| */ | |
| static int read_fwfile(const struct ihex_binrec *record) | |
| { | |
| int i; | |
| int rcnt = 0; | |
| u16 *tmpinfo; | |
| u16 *ptr16; | |
| u32 *ptr32, len, addr; | |
| pr_debug("Reading fw file ...\n"); | |
| while (record) { | |
| rcnt++; | |
| len = be16_to_cpu(record->len); | |
| addr = be32_to_cpu(record->addr); | |
| /* Point into data for different word lengths */ | |
| ptr32 = (u32 *)record->data; | |
| ptr16 = (u16 *)record->data; | |
| /* parse what was an S3 srec and put it in the right array */ | |
| switch (addr) { | |
| case S3ADDR_START: | |
| startaddr = *ptr32; | |
| pr_debug(" S7 start addr, record=%d addr=0x%08x\n", | |
| rcnt, | |
| startaddr); | |
| break; | |
| case S3ADDR_PLUG: | |
| s3plug[ns3plug].itemcode = *ptr32; | |
| s3plug[ns3plug].addr = *(ptr32 + 1); | |
| s3plug[ns3plug].len = *(ptr32 + 2); | |
| pr_debug(" S3 plugrec, record=%d itemcode=0x%08x addr=0x%08x len=%d\n", | |
| rcnt, | |
| s3plug[ns3plug].itemcode, | |
| s3plug[ns3plug].addr, | |
| s3plug[ns3plug].len); | |
| ns3plug++; | |
| if (ns3plug == S3PLUG_MAX) { | |
| pr_err("S3 plugrec limit reached - aborting\n"); | |
| return 1; | |
| } | |
| break; | |
| case S3ADDR_CRC: | |
| s3crc[ns3crc].addr = *ptr32; | |
| s3crc[ns3crc].len = *(ptr32 + 1); | |
| s3crc[ns3crc].dowrite = *(ptr32 + 2); | |
| pr_debug(" S3 crcrec, record=%d addr=0x%08x len=%d write=0x%08x\n", | |
| rcnt, | |
| s3crc[ns3crc].addr, | |
| s3crc[ns3crc].len, | |
| s3crc[ns3crc].dowrite); | |
| ns3crc++; | |
| if (ns3crc == S3CRC_MAX) { | |
| pr_err("S3 crcrec limit reached - aborting\n"); | |
| return 1; | |
| } | |
| break; | |
| case S3ADDR_INFO: | |
| s3info[ns3info].len = *ptr16; | |
| s3info[ns3info].type = *(ptr16 + 1); | |
| pr_debug(" S3 inforec, record=%d len=0x%04x type=0x%04x\n", | |
| rcnt, | |
| s3info[ns3info].len, | |
| s3info[ns3info].type); | |
| if (((s3info[ns3info].len - 1) * sizeof(u16)) > | |
| sizeof(s3info[ns3info].info)) { | |
| pr_err("S3 inforec length too long - aborting\n"); | |
| return 1; | |
| } | |
| tmpinfo = (u16 *)&s3info[ns3info].info.version; | |
| pr_debug(" info="); | |
| for (i = 0; i < s3info[ns3info].len - 1; i++) { | |
| tmpinfo[i] = *(ptr16 + 2 + i); | |
| pr_debug("%04x ", tmpinfo[i]); | |
| } | |
| pr_debug("\n"); | |
| ns3info++; | |
| if (ns3info == S3INFO_MAX) { | |
| pr_err("S3 inforec limit reached - aborting\n"); | |
| return 1; | |
| } | |
| break; | |
| default: /* Data record */ | |
| s3data[ns3data].addr = addr; | |
| s3data[ns3data].len = len; | |
| s3data[ns3data].data = (uint8_t *)record->data; | |
| ns3data++; | |
| if (ns3data == S3DATA_MAX) { | |
| pr_err("S3 datarec limit reached - aborting\n"); | |
| return 1; | |
| } | |
| break; | |
| } | |
| record = ihex_next_binrec(record); | |
| } | |
| return 0; | |
| } | |
| /*---------------------------------------------------------------- | |
| * writeimage | |
| * | |
| * Takes the chunks, builds p80211 messages and sends them down | |
| * to the driver for writing to the card. | |
| * | |
| * Arguments: | |
| * wlandev device | |
| * fchunk Array of image chunks | |
| * nfchunks Number of image chunks | |
| * | |
| * Returns: | |
| * 0 success | |
| * ~0 failure | |
| *---------------------------------------------------------------- | |
| */ | |
| static int writeimage(struct wlandevice *wlandev, struct imgchunk *fchunk, | |
| unsigned int nfchunks) | |
| { | |
| int result = 0; | |
| struct p80211msg_p2req_ramdl_state *rstmsg; | |
| struct p80211msg_p2req_ramdl_write *rwrmsg; | |
| u32 resultcode; | |
| int i; | |
| int j; | |
| unsigned int nwrites; | |
| u32 curroff; | |
| u32 currlen; | |
| u32 currdaddr; | |
| rstmsg = kzalloc(sizeof(*rstmsg), GFP_KERNEL); | |
| rwrmsg = kzalloc(sizeof(*rwrmsg), GFP_KERNEL); | |
| if (!rstmsg || !rwrmsg) { | |
| kfree(rstmsg); | |
| kfree(rwrmsg); | |
| netdev_err(wlandev->netdev, | |
| "%s: no memory for firmware download, aborting download\n", | |
| __func__); | |
| return -ENOMEM; | |
| } | |
| /* Initialize the messages */ | |
| strcpy(rstmsg->devname, wlandev->name); | |
| rstmsg->msgcode = DIDmsg_p2req_ramdl_state; | |
| rstmsg->msglen = sizeof(*rstmsg); | |
| rstmsg->enable.did = DIDmsg_p2req_ramdl_state_enable; | |
| rstmsg->exeaddr.did = DIDmsg_p2req_ramdl_state_exeaddr; | |
| rstmsg->resultcode.did = DIDmsg_p2req_ramdl_state_resultcode; | |
| rstmsg->enable.status = P80211ENUM_msgitem_status_data_ok; | |
| rstmsg->exeaddr.status = P80211ENUM_msgitem_status_data_ok; | |
| rstmsg->resultcode.status = P80211ENUM_msgitem_status_no_value; | |
| rstmsg->enable.len = sizeof(u32); | |
| rstmsg->exeaddr.len = sizeof(u32); | |
| rstmsg->resultcode.len = sizeof(u32); | |
| strcpy(rwrmsg->devname, wlandev->name); | |
| rwrmsg->msgcode = DIDmsg_p2req_ramdl_write; | |
| rwrmsg->msglen = sizeof(*rwrmsg); | |
| rwrmsg->addr.did = DIDmsg_p2req_ramdl_write_addr; | |
| rwrmsg->len.did = DIDmsg_p2req_ramdl_write_len; | |
| rwrmsg->data.did = DIDmsg_p2req_ramdl_write_data; | |
| rwrmsg->resultcode.did = DIDmsg_p2req_ramdl_write_resultcode; | |
| rwrmsg->addr.status = P80211ENUM_msgitem_status_data_ok; | |
| rwrmsg->len.status = P80211ENUM_msgitem_status_data_ok; | |
| rwrmsg->data.status = P80211ENUM_msgitem_status_data_ok; | |
| rwrmsg->resultcode.status = P80211ENUM_msgitem_status_no_value; | |
| rwrmsg->addr.len = sizeof(u32); | |
| rwrmsg->len.len = sizeof(u32); | |
| rwrmsg->data.len = WRITESIZE_MAX; | |
| rwrmsg->resultcode.len = sizeof(u32); | |
| /* Send xxx_state(enable) */ | |
| pr_debug("Sending dl_state(enable) message.\n"); | |
| rstmsg->enable.data = P80211ENUM_truth_true; | |
| rstmsg->exeaddr.data = startaddr; | |
| result = prism2mgmt_ramdl_state(wlandev, rstmsg); | |
| if (result) { | |
| netdev_err(wlandev->netdev, | |
| "%s state enable failed w/ result=%d, aborting download\n", | |
| __func__, result); | |
| goto free_result; | |
| } | |
| resultcode = rstmsg->resultcode.data; | |
| if (resultcode != P80211ENUM_resultcode_success) { | |
| netdev_err(wlandev->netdev, | |
| "%s()->xxxdl_state msg indicates failure, w/ resultcode=%d, aborting download.\n", | |
| __func__, resultcode); | |
| result = 1; | |
| goto free_result; | |
| } | |
| /* Now, loop through the data chunks and send WRITESIZE_MAX data */ | |
| for (i = 0; i < nfchunks; i++) { | |
| nwrites = fchunk[i].len / WRITESIZE_MAX; | |
| nwrites += (fchunk[i].len % WRITESIZE_MAX) ? 1 : 0; | |
| curroff = 0; | |
| for (j = 0; j < nwrites; j++) { | |
| /* TODO Move this to a separate function */ | |
| int lenleft = fchunk[i].len - (WRITESIZE_MAX * j); | |
| if (fchunk[i].len > WRITESIZE_MAX) | |
| currlen = WRITESIZE_MAX; | |
| else | |
| currlen = lenleft; | |
| curroff = j * WRITESIZE_MAX; | |
| currdaddr = fchunk[i].addr + curroff; | |
| /* Setup the message */ | |
| rwrmsg->addr.data = currdaddr; | |
| rwrmsg->len.data = currlen; | |
| memcpy(rwrmsg->data.data, | |
| fchunk[i].data + curroff, currlen); | |
| /* Send flashdl_write(pda) */ | |
| pr_debug | |
| ("Sending xxxdl_write message addr=%06x len=%d.\n", | |
| currdaddr, currlen); | |
| result = prism2mgmt_ramdl_write(wlandev, rwrmsg); | |
| /* Check the results */ | |
| if (result) { | |
| netdev_err(wlandev->netdev, | |
| "%s chunk write failed w/ result=%d, aborting download\n", | |
| __func__, result); | |
| goto free_result; | |
| } | |
| resultcode = rstmsg->resultcode.data; | |
| if (resultcode != P80211ENUM_resultcode_success) { | |
| pr_err("%s()->xxxdl_write msg indicates failure, w/ resultcode=%d, aborting download.\n", | |
| __func__, resultcode); | |
| result = 1; | |
| goto free_result; | |
| } | |
| } | |
| } | |
| /* Send xxx_state(disable) */ | |
| pr_debug("Sending dl_state(disable) message.\n"); | |
| rstmsg->enable.data = P80211ENUM_truth_false; | |
| rstmsg->exeaddr.data = 0; | |
| result = prism2mgmt_ramdl_state(wlandev, rstmsg); | |
| if (result) { | |
| netdev_err(wlandev->netdev, | |
| "%s state disable failed w/ result=%d, aborting download\n", | |
| __func__, result); | |
| goto free_result; | |
| } | |
| resultcode = rstmsg->resultcode.data; | |
| if (resultcode != P80211ENUM_resultcode_success) { | |
| netdev_err(wlandev->netdev, | |
| "%s()->xxxdl_state msg indicates failure, w/ resultcode=%d, aborting download.\n", | |
| __func__, resultcode); | |
| result = 1; | |
| goto free_result; | |
| } | |
| free_result: | |
| kfree(rstmsg); | |
| kfree(rwrmsg); | |
| return result; | |
| } | |
| static int validate_identity(void) | |
| { | |
| int i; | |
| int result = 1; | |
| int trump = 0; | |
| pr_debug("NIC ID: %#x v%d.%d.%d\n", | |
| nicid.id, nicid.major, nicid.minor, nicid.variant); | |
| pr_debug("MFI ID: %#x v%d %d->%d\n", | |
| rfid.id, rfid.variant, rfid.bottom, rfid.top); | |
| pr_debug("CFI ID: %#x v%d %d->%d\n", | |
| macid.id, macid.variant, macid.bottom, macid.top); | |
| pr_debug("PRI ID: %#x v%d %d->%d\n", | |
| priid.id, priid.variant, priid.bottom, priid.top); | |
| for (i = 0; i < ns3info; i++) { | |
| switch (s3info[i].type) { | |
| case 1: | |
| pr_debug("Version: ID %#x %d.%d.%d\n", | |
| s3info[i].info.version.id, | |
| s3info[i].info.version.major, | |
| s3info[i].info.version.minor, | |
| s3info[i].info.version.variant); | |
| break; | |
| case 2: | |
| pr_debug("Compat: Role %#x Id %#x v%d %d->%d\n", | |
| s3info[i].info.compat.role, | |
| s3info[i].info.compat.id, | |
| s3info[i].info.compat.variant, | |
| s3info[i].info.compat.bottom, | |
| s3info[i].info.compat.top); | |
| /* MAC compat range */ | |
| if ((s3info[i].info.compat.role == 1) && | |
| (s3info[i].info.compat.id == 2)) { | |
| if (s3info[i].info.compat.variant != | |
| macid.variant) { | |
| result = 2; | |
| } | |
| } | |
| /* PRI compat range */ | |
| if ((s3info[i].info.compat.role == 1) && | |
| (s3info[i].info.compat.id == 3)) { | |
| if ((s3info[i].info.compat.bottom > | |
| priid.top) || | |
| (s3info[i].info.compat.top < | |
| priid.bottom)) { | |
| result = 3; | |
| } | |
| } | |
| /* SEC compat range */ | |
| if ((s3info[i].info.compat.role == 1) && | |
| (s3info[i].info.compat.id == 4)) { | |
| /* FIXME: isn't something missing here? */ | |
| } | |
| break; | |
| case 3: | |
| pr_debug("Seq: %#x\n", s3info[i].info.buildseq); | |
| break; | |
| case 4: | |
| pr_debug("Platform: ID %#x %d.%d.%d\n", | |
| s3info[i].info.version.id, | |
| s3info[i].info.version.major, | |
| s3info[i].info.version.minor, | |
| s3info[i].info.version.variant); | |
| if (nicid.id != s3info[i].info.version.id) | |
| continue; | |
| if (nicid.major != s3info[i].info.version.major) | |
| continue; | |
| if (nicid.minor != s3info[i].info.version.minor) | |
| continue; | |
| if ((nicid.variant != s3info[i].info.version.variant) && | |
| (nicid.id != 0x8008)) | |
| continue; | |
| trump = 1; | |
| break; | |
| case 0x8001: | |
| pr_debug("name inforec len %d\n", s3info[i].len); | |
| break; | |
| default: | |
| pr_debug("Unknown inforec type %d\n", s3info[i].type); | |
| } | |
| } | |
| /* walk through */ | |
| if (trump && (result != 2)) | |
| result = 0; | |
| return result; | |
| } |