| New in 0.16 - 2009-05-08 |
| ------------------------ |
| * C++ wrapper: Reopen the device after calling get_strings() in Context::open() (Marek Vavruša and Intra2net) |
| * C++ wrapper: Fixed an inheritance problem (Marek Vavruša and Intra2net) |
| * C++ wrapper: Relicensed under GPLv2 + linking exception (Marek Vavruša and Intra2net) |
| * Support for FT2232H and FT4232H (David Challis, Alex Harford and Intra2net) |
| * Support for mingw cross compile (Uwe Bonnes) |
| * Python bindings and minor autoconf cleanup (Tarek Heiland) |
| * Code cleanup in various places (Intra2net) |
| * Fixed ftdi_read_chipid in some cases (Matthias Richter) |
| * eeprom decode function and small cleanups (Marius Kintel) |
| * cmake system improvements (Marius Kintel and Intra2net) |
| * Fix compilation in -ansi -pedantic mode (Matthias Janke) |
| |
| New in 0.15 - 2008-12-19 |
| ------------------------ |
| * Full C++ wrapper. Needs boost (Marek Vavruša and Intra2net) |
| * cmake rules (Marek Vavruša) |
| |
| New in 0.14 - 2008-09-09 |
| ------------------------ |
| * Fixed flow control code for second FT2232 interface (Marek Vavruša) |
| * Ability to set flow control via one USB call (Marek Vavruša) |
| * 64 bit build support in the RPM spec file (Uwe Bonnes) |
| * Small fix to the RPM spec file (Uwe Bonnes) |
| * Ability to set RS232 break type (Intra2net) |
| * Grouped flow control and modem status code together (Intra2net) |
| |
| New in 0.13 - 2008-06-13 |
| ------------------------ |
| * Build .spec file via configure.in (Intra2net) |
| * Fixed "libusb-config --cflags" call (Mike Frysinger and Intra2net) |
| * Always set usb configuration (Mike Frysinger and Intra2net) |
| * Improved libusb-win32 support (Mike Frysinger) |
| |
| New in 0.12 - 2008-04-16 |
| ------------------------ |
| * Fix build of documentation for "out of tree" builds |
| * Fix USB config descriptor in the eeprom (Juergen Beisert) |
| * Ability to purge RX/TX buffers separately (Arnim Läuger) |
| * Setting of event and error character (Arnim Läuger) |
| * Poll modem status function (Arnim Läuger and Intra2net) |
| * Updated documentation and created AUTHORS file |
| |
| New in 0.11 - 2008-03-01 |
| ------------------------ |
| * Vala bindings helper functions (ftdi_new, ftdi_free, ftdi_list_free2) (Even Nermerson) |
| * Support for different EEPROM sizes (Andrew John Rogers, andrew@rogerstech.co.uk) |
| * Async write support. Linux only and no error handling. |
| You have to enable it via --with-async-mode. |
| * Detection of R-type chips |
| * FTDIChip-ID read support (Peter Holik) |
| |
| New in 0.10 - 2007-05-08 |
| ------------------------ |
| * Examples for libftdi_usb_find_all and CBUS mode |
| * Fixed ftdi_list_free |
| * Small cosmetic changes |
| |
| New in 0.9 - 2007-02-09 |
| ----------------------- |
| * Fixed build without doxygen |
| * Correct .so file library version |
| |
| New in 0.8 - 2007-02-08 |
| ----------------------- |
| * Complete doxygen documentation and examples |
| * Extended FT2232C bitbang mode example code (Max) |
| * ftdi_usb_get_strings function to get device ID strings (Matthijs ten Berge) |
| * Fix ftdi_read_pins on PowerPC systems (Thomas Fischl) |
| * Automatically detach ftdi_sio kernel driver (Uwe Bonnes and Intra2net) |
| * Configurable flow control (Lorenz Moesenlechner and Matthias Kranz) |
| |
| New in 0.7 - 2005-10-11 |
| ----------------------- |
| * Baudrate calculation fix for FT2232C (Steven Turner/FTDI) |
| * Find all devices by vendor/product id (Tim Ansell and Intra2net) |
| * Documentation updates (Tim Ansell) |
| |
| New in 0.6 - 2005-04-24 |
| ----------------------- |
| * Set library version on .so file again |
| * Configurable serial line parameters (Alain Abbas) |
| * Improved filtering of status bytes (Evgeny Sinelnikov) |
| * Extended FT2232C support (Uwe Bonnes) |
| * Small improvement to the baudrate calculation code (Emil) |
| * Error handling cleanup (Rogier Wolff and Intra2net) |
| |
| New in 0.5 - 2004-09-24 |
| ----------------------- |
| * New autoconf suite |
| * pkgconfig support |
| * Status byte filtering now works for "big" readbuffer sizes (Thanks Evgeny!) |
| * Open device by description and/or serial (Evgeny Sinelnikov) |
| * Improved error handling (Evgeny Sinelnikov) |
| |
| New in 0.4 - 2004-06-15 |
| ----------------------- |
| * Fixed filtering of status bytes (Readbuffer size is now 64 bytes) |
| * FT2232C support (Steven Turner/FTDI) |
| * New baudrate calculation code (Ian Abbott) |
| * Automatic detection of chip type |
| * Important: ftdi_write_data now returns the bytes written |
| * Fixed defaults values in ftdi_eeprom_initdefaults (Jean-Daniel Merkli) |
| * Reset internal readbuffer offsets for reset()/purge_buffers() |
| * Small typo fixes (Mark Haemmerling) |
| |
| New in 0.3 - 2004-03-25 |
| ----------------------- |
| * Improved read function which takes arbitrary input buffer sizes |
| Attention: Call ftdi_deinit() on exit to free used memory |
| * Vastly increased read/write performance (configurable chunksize, default is 4096) |
| * Set/get latency timer function working (Thanks Steven Turner/FTDI) |
| * Increased library version because the changes require recompilation |
| |
| New in 0.2 - 2004-01-03 |
| ----------------------- |
| * EEPROM build fix by Daniel Kirkham (Melbourne, Australia) |
| * Implemented basic ftdi_read_data() function |
| * EEPROM write fixes |
| |
| New in 0.1 - 2003-06-10 |
| ----------------------- |
| * First public release |
