blob: f8bbdd16bc9b4e4eb8c8bebd2a6bfe894b8cdf0f [file] [log] [blame]
# File: Makefile
#
# Copyright (C) 2008-2009, Marvell International Ltd.
#
# This software file (the "File") is distributed by Marvell International
# Ltd. under the terms of the GNU General Public License Version 2, June 1991
# (the "License"). You may use, redistribute and/or modify this File in
# accordance with the terms and conditions of the License, a copy of which
# is available by writing to the Free Software Foundation, Inc.,
# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA or on the
# worldwide web at http://www.gnu.org/licenses/old-licenses/gpl-2.0.txt.
#
# A copy of the GPL is available in file gpl-2.0.txt accompanying in this
# deliverables.
#
# THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE
# IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE
# ARE EXPRESSLY DISCLAIMED. The License provides additional details about
# this warranty disclaimer.
CC= $(CROSS_COMPILE)gcc
LD= $(CROSS_COMPILE)ld
BACKUP= /root/backup
YMD= `date +%Y%m%d%H%M`
#############################################################################
# Configuration Options
#############################################################################
# Debug Option
# DEBUG LEVEL n/1/2:
# n: NO DEBUG
# 1: Only PRINTM(MMSG,...), PRINTM(MFATAL,...), ...
# 2: All PRINTM()
CONFIG_DEBUG=1
# Proc debug file
CONFIG_PROC_DEBUG=y
# Re-association in driver
CONFIG_REASSOCIATION=y
# Manufacturing firmware support
CONFIG_MFG_CMD_SUPPORT=y
# Big-endian platform
CONFIG_BIG_ENDIAN=n
# Enable SDIO multi-port Tx aggregation
CONFIG_SDIO_MULTI_PORT_TX_AGGR=y
# Enable SDIO multi-port Rx aggregation
CONFIG_SDIO_MULTI_PORT_RX_AGGR=y
#############################################################################
# Select Platform Tools
#############################################################################
MODEXT = ko
#EXTRA_CFLAGS += -I$(PWD)/mlan
EXTRA_CFLAGS += -I$(M)/mlan
EXTRA_CFLAGS += -DLINUX
# KERNELDIR point to the installed kernel directory.
# KERNELDIR can be set on the command line,
# make KERNELDIR=/usr/src/arm/<arch-bsp-path>
# Alternatively KERNELDIR can be set in the environment.
# Default value for KERNELDIR is set below.
KERNELDIR ?= /usr/src/arm/linux-2.6.25-pxa9xx
# CROSS_COMPILE specify the prefix used for all executables used
# during compilation. Only gcc and related bin-utils executables
# CROSS_COMPILE can be set on the command line
# make CROSS_COMPILE=</usr/local/arm/4.1.1/bin/>arm-linux-
# Alternatively CROSS_COMPILE can be set in the environment.
# Default value for CROSS_COMPILE is set below.
CROSS_COMPILE ?= /usr/local/arm/4.1.1/bin/arm-linux-
# INSTALLDIR specify the path to install the kernel module after
# succesful compilation.
# INSTALLDIR can be set on the command line
# make INSTALLDIR=/tftpboot/<rootfs>
# Alternatively INSTALLDIR can be set in the environment.
# Default value for INSTALL is set below.
INSTALLDIR ?= /tftpboot/pxa9xx/root
# ARCH specifies the architecture of the target processor, this kernel
# module will run.
# ARCH can be set on the command line
# make ARCH=<arm/i386>
# Alternatively ARCH can be set in the environment
# Default values of ARCH for specific platform are set below.
ARCH ?= arm
LD += -S
BINDIR = ../bin_sd8787
#############################################################################
# Compiler Flags
#############################################################################
EXTRA_CFLAGS += -I$(KERNELDIR)/include
EXTRA_CFLAGS += -DFPNUM='"64"'
ifeq ($(CONFIG_DEBUG),1)
EXTRA_CFLAGS += -DDEBUG_LEVEL1
endif
ifeq ($(CONFIG_DEBUG),2)
EXTRA_CFLAGS += -DDEBUG_LEVEL1
EXTRA_CFLAGS += -DDEBUG_LEVEL2
DBG= -dbg
endif
ifeq ($(CONFIG_PROC_DEBUG),y)
EXTRA_CFLAGS += -DPROC_DEBUG
export CONFIG_PROC_DEBUG
endif
ifeq ($(CONFIG_REASSOCIATION),y)
EXTRA_CFLAGS += -DREASSOCIATION
endif
ifeq ($(CONFIG_MFG_CMD_SUPPORT),y)
EXTRA_CFLAGS += -DMFG_CMD_SUPPORT
endif
ifeq ($(CONFIG_BIG_ENDIAN),y)
EXTRA_CFLAGS += -DBIG_ENDIAN
endif
ifeq ($(CONFIG_SDIO_MULTI_PORT_TX_AGGR),y)
EXTRA_CFLAGS += -DSDIO_MULTI_PORT_TX_AGGR
endif
ifeq ($(CONFIG_SDIO_MULTI_PORT_RX_AGGR),y)
EXTRA_CFLAGS += -DSDIO_MULTI_PORT_RX_AGGR
endif
#############################################################################
# Make Targets
#############################################################################
ifneq ($(KERNELRELEASE),)
MOALOBJS = mlinux/moal_main.o \
mlinux/moal_ioctl.o \
mlinux/moal_shim.o
MLANOBJS = mlan/mlan_shim.o mlan/mlan_init.o \
mlan/mlan_txrx.o \
mlan/mlan_cmdevt.o mlan/mlan_misc.o \
mlan/mlan_module.o
MLANOBJS += mlan/mlan_wmm.o
MLANOBJS += mlan/mlan_sdio.o
MLANOBJS += mlan/mlan_11n_aggr.o
MLANOBJS += mlan/mlan_11n_rxreorder.o
MLANOBJS += mlan/mlan_11n.o
MLANOBJS += mlan/mlan_11d.o
MLANOBJS += mlan/mlan_scan.o
MLANOBJS += mlan/mlan_join.o
MLANOBJS += mlan/mlan_cfp.o \
mlan/mlan_sta_ioctl.o \
mlan/mlan_sta_rx.o \
mlan/mlan_sta_tx.o \
mlan/mlan_sta_event.o \
mlan/mlan_sta_cmd.o \
mlan/mlan_sta_cmdresp.o
MOALOBJS += mlinux/moal_priv.o \
mlinux/moal_wext.o
MLANOBJS += mlan/mlan_11h.o
MLANOBJS += mlan/mlan_meas.o
ifdef CONFIG_PROC_FS
MOALOBJS += mlinux/moal_proc.o
ifeq ($(CONFIG_PROC_DEBUG),y)
MOALOBJS += mlinux/moal_debug.o
endif
endif
obj-m := mlan.o
mlan-objs := $(MLANOBJS)
MOALOBJS += mlinux/moal_sdio_mmc.o
obj-m += sd8xxx.o
sd8xxx-objs := $(MOALOBJS)
# Otherwise we were called directly from the command line; invoke the kernel build system.
else
default:
$(MAKE) -C $(KERNELDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
endif
###############################################################
export CC LD EXTRA_CFLAGS KERNELDIR
.PHONY: mapp/mlanconfig mapp/mlan2040coex clean distclean
@echo "Finished Making Marvell Wlan Linux Driver"
mapp/mlanconfig:
$(MAKE) -C $@
mapp/mlan2040coex:
$(MAKE) -C $@
echo:
build: echo default
@if [ ! -d $(BINDIR) ]; then \
mkdir $(BINDIR); \
fi
cp -f mlan.$(MODEXT) $(BINDIR)/mlan$(DBG).$(MODEXT)
cp -f sd8xxx.$(MODEXT) $(BINDIR)/sd8787$(DBG).$(MODEXT)
cp -f README $(BINDIR)
$(MAKE) -C mapp/mlanconfig $@ INSTALLDIR=$(BINDIR)
$(MAKE) -C mapp/mlan2040coex $@ INSTALLDIR=$(BINDIR)
clean:
-find . -name "*.o" -exec rm {} \;
-find . -name "*.ko" -exec rm {} \;
-find . -name ".*.cmd" -exec rm {} \;
-find . -name "*.mod.c" -exec rm {} \;
-find . -name "Module.symvers" -exec rm {} \;
-find . -name "Module.markers" -exec rm {} \;
-find . -name "modules.order" -exec rm {} \;
-rm -rf .tmp_versions
$(MAKE) -C mapp/mlanconfig $@
$(MAKE) -C mapp/mlan2040coex $@
install: default
cp -f mlan.$(MODEXT) $(INSTALLDIR)/mlan$(DBG).$(MODEXT)
cp -f sd8xxx.$(MODEXT) $(INSTALLDIR)/sd8787$(DBG).$(MODEXT)
echo "sd8787 Driver Installed"
distclean:
-find . -name "*.o" -exec rm {} \;
-find . -name "*.orig" -exec rm {} \;
-find . -name "*.swp" -exec rm {} \;
-find . -name "*.*~" -exec rm {} \;
-find . -name "*~" -exec rm {} \;
-find . -name "*.d" -exec rm {} \;
-find . -name "*.a" -exec rm {} \;
-find . -name "tags" -exec rm {} \;
-find . -name ".*" -exec rm -rf 2> /dev/null \;
-find . -name "*.ko" -exec rm {} \;
-find . -name ".*.cmd" -exec rm {} \;
-find . -name "*.mod.c" -exec rm {} \;
-rm -rf .tmp_versions
$(MAKE) -C mapp/mlanconfig $@
$(MAKE) -C mapp/mlan2040coex $@
# End of file